Quality control inspector jobs in Moody, AL

Manufacturing Quality Assurance Project Job INTERVIEW Call ********** Some Quality or Team Leader Experience Great Attention to Detail for Quality Assurance Full Time 40 Hours a Week Located 20 Miles from Arab 1st Shift 8am to 4pm 8 Hour Shifts Weekly Paid 40 hours = 660 Add 8 hours OT = 858 Each company is different you will be trained Bluetooth can be used while working PPE: Shorts, Capris, Long Pants, T-Shirt NO Steel Toes are Required INTERVIEW CALL **********

Atlas is a nationwide leader in civil engineering materials testing and geotechnical consulting services for environmental industrial and infrastructure construction projects Headquartered in Denver CO Atlas currently has over 3500 employees with offices throughout the US including Alaska & Hawaii Its no accident that Atlas creates a better experience for infrastructure and environmental projects Its how we are built with the best people in the industry with the reach and expertise to help at any and every step of the project and with a heart led approach that puts quality and safety at the center of everything we do Were just built to be better We are a great company We are seeking a CEI Level 3 Inspector to join our Birmingham AL team Come join us Job responsibilities include but are not limited to This is skilled sub professional engineering work in the field or office Employees in said class shall act as the Assistant Project Manager and be responsible for reviewing and directing inspection duties of all project inspectors The Senior Inspector shall be capable of surveying and drafting as they apply to documenting and inspection of a construction project The Senior Inspector shall report directly to Project ManagerMinimum requirements Eight years of experience in construction inspection surveying or highway materials testing and inspection or a Bachelor of Science degree in Civil Engineering or Registered Professional Engineer with two years of experience in construction inspection surveying or highway materials testing and inspection One or more of the following certifications as necessary and approved by the Region Engineer Inspectors who are to perform a specific task shall be certified in said field Asphalt Level I Laboratory Technician CertificationAsphalt Level II Quality Manager Technician CertificationCertified Concrete Technician ACI and ALDOT CertificationRoadway HMA Pavement Technician CertificationWork Zone Safety CertificationRadiation Safety Technician CertificationQualified Credentialed Inspector QCIContract Plan Reading CertificationBenefits Atlas offers a comprehensive benefit program to meet the diverse needs of our employees Depending on your employment status Atlas benefits include health dental vision life AD&D voluntary life AD&D disability benefits leaves of absence 401k paid time off paid holidays employee assistance program educational assistance program Who We Are We strive to be the most sought after infrastructure and environmental solutions company known for our unique values driven approach and brought to life by the industrys most exceptional people Atlas provides professional testing inspection engineering environmental and consulting services from more than 100 locations nationwide We deliver solutions to both public and private sector clients in the transportation commercial water government education and industrial markets With a legacy of providing consistent quality and results Atlas creates a better experience at every stage of an infrastructure project We connect the best experts in the industry to deliver value from concept to completion and beyond This means doing everything our clients expect and then raising the expectations in a way that only our people can Our Values Life We enhance quality of life We value people and safety above all else Heart As our hallmarks we act with compassion empathy and respect Trust We work together as partners doing what we say with full accountability Mastery Always striving for the highest quality we ensure greatness inspires all our work Atlas EEOC Statement Atlas is an equal opportunity employer We prohibit discrimination and harassment of any kind based on race color sex religion sexual orientation national origin disability genetic information pregnancy or any other protected characteristic as outlined by federal state or local laws This policy applies to all employment practices within our organization including hiring recruiting promotion termination layoff recall leave of absence compensation benefits training and apprenticeship Atlas makes hiring decisions based solely on qualifications merit and business needs at the time For more information read through our EEO Policy httpswwweeocgovsitesdefaultfiles2023 0622 088EEOCKnowYourRights612ScreenRdrpdf

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Yulista Contract Services LLCRegular Primary Function The Aviation Quality Assurance Technical Inspector is responsible for ensuring all aircraft, aircraft component and shop inspections and tasks performed are compliant to Yulista Quality Management System (QMS) processes and procedures as well as all applicable/approved technical data. Perform visual and physical evaluations, testing and control of parts, products and raw materials to ensure conformity to established specifications, applicable standards of quality. Provide technical assistance, when needed, to determine the correct course of action to resolve maintenance problems Essential Duties: Utilize data collection techniques and procedures for evaluation, inspection, and audit programs, evaluates the results and determines the appropriate and effective method and format for presentation to higher-level management. Performs statistical analysis (e.g. normal distribution, averages, means, standard deviations, trending, root cause analysis, etc.) using standard statistical quality control methods. Utilize inspection and evaluation techniques, mathematics, and database management skills to perform root cause, deficiency and trend analysis. Recommends Acceptable Quality Levels (AQLs), frequency changes to Routine Inspection Lists (RILs), and recommendations for corrective maintenance practice action. Utilizes a comprehensive knowledge and ability to interpret Air Force Instructions, Technical Orders, engineering drawings, product specifications, Air Force Occupational and Health (AFOSH) and environmental standards, public law, and locally developed policy. Evaluates and assesses complex systems, subsystems, integrated systems/subsystems, or components for conformance to applicable technical data, engineering drawings, standards and specifications. Evaluates, conducts reviews, activity inspections and compliance of all maintenance activities to include the logistics maintenance support functional areas such as production, programs and mobility, maintenance training, plans, scheduling and documentation and data base management as directed by the Quality Manager Ensure that personnel have all items necessary to accomplish their assigned task Review project work request for completeness and accuracy Provide accurate weekly/monthly status reporting, metrics and other contractual obligations to meet project performance requirements and customer expectations Experience in evaluating programs with electrical, electronic, machining, structures, composites, aircraft and ground support systems in a development, manufacturing and testing environment Ensures compliance with all safety, environmental and quality practices and procedures as outlined in organizational/departmental guidelines and SOPs as well as applicable federal, state and local regulations Evaluates the activities of all special processes such as, but not limited to NDI, welding, testing soldering for internal employees and approved subcontractors Develops changes in methods, sampling techniques and control procedures and processes to ensure maximum quality to the customer Carries out audits and supports audits Provides professional interface with customer and/or government personnel Develops briefings for management, defines strategies Evaluates training criteria to maintain the skills of the team current, relevant and effective Supervisory Responsibilities This job has no supervisory responsibilities. This position has the responsibility and authority to carry out assigned tasks. Desired Knowledge, Skills & Abilities: Knowledge is mandatory of mechanical, pneumatic, and electrical principles applying to aircrew egress systems; concepts and application of applicable maintenance directives; and using and interpreting schematic drawings, and technical publications. Intermediate computer skills specifically using Microsoft Office Suite. Ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred. Ability to enter data accurately into databases. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members. Must possess effective oral and technical written communication skills to clearly communicate information to others. Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc. Ability to follow a process. Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures. Strong professional customer service skills, including active listening, prompt service and follow-up. Strong decision analysis and problem-solving skills. Ability to draw conclusions and justify decisions. Must be able to communicate issues to management. Ability to learn and understand corporate policies and procedures and how they relate to Yulista goals. Ability to perform basic mathematical computations. High degree of self-motivation and the ability to work independently. Ability to multi-task. Bachelor's degree in related area preferred Required Qualifications: High School Diploma / Equivalent Must have a minimum of Six (6) years Aviation Inspection experience. Must have an A & P License or a Military School Certification. Must possess and maintain a valid driver's license and be required to operate a government general purpose vehicle Willingness to travel Must have the ability to obtain and maintain a Government Security Clearance PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Join our Team: Quality Technician Birmingham, AL Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Quality Technician to contribute to the Terex team in Birmingham, AL. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do • Safe and positive approach to daily standard work. • Proficient in reading blueprints, schematics and other types of engineering/manufacturing drawings. • Understanding of precision measurement equipment and applications. • Experienced with Microsoft Excel, Word, and PowerPoint. • Basic understanding of iPads/digital applications. • Highly proficient in communicating problems and solutions to leadership, internal and external customers, and with other departments and plants. • Must be familiar with weld inspection methods used by Terex Utilities at the various facilities. • Ability to investigate problems, determine root cause, and suggest or implement effective solutions. • Must have a desire to make a difference, make long-term changes to Terex Utilities Quality. • Ability to train the Terex Utilities team on Quality Standards and Customer Requirements. • Perform Audits/Inspections at specified Quality gates. • Write non-conformances and notify correct departments • Issue red tags • Help identify and drive internal quality and safety improvements • Work with operations team to resolve issues and put in countermeasures to prevent future reoccurrences. Improve/modify test procedure as required. • Other Job duties as assigned What you'll bring • High School Diploma and/or equivalent experience • 2-3 years of proven experience in Assembly/Installation, Testing, or Inspection. • Possess good mechanical aptitude • Effectively communicate with all team members • Function as a team member and contribute to group goals while maintaining a positive attitude. • Work independently with minimal supervision in a responsible manner • Recognize potential safety hazards and take appropriate actions to minimize risks • Maintain the integrity of confidential business and product information • Demonstrate acceptable attendance for company standard; provides adequate notification; aware of impact on organization • Take initiative to recognize areas of opportunity and resolve with appropriate action • Identify problems, work towards root cause elimination utilizing appropriate problem-solving methods • Demonstrate excellent leadership skills • Help others where needed, backs up others • Willingness to be flexible to learn new skills based on the need of the company • Consistently performs to Takt Time or quoted time. • Meets established metrics by performing quality work in accordance to SOPs for the area with minimal errors • Work to improve processes within their work area - uses appropriate tools to find and eliminate waste and to reduce overall business costs • Continuously search for new and better ways of doing things; challenges the status quo and sets stretch goals; works across boundaries to achieve common goals; strives to continuously improve oneself Why Join Us • We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose. • Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. • Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. • We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. • We are committed to helping team members reach their full potential. • Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. • We offer competitive salaries, health insurance (medical, dental, vision, Rx), life insurance, accidental death & dismemberment (AD&D), short-term and long-term disability, extended leave options, paid time off, company holidays, 401k matching, employee stock purchase plan, legal assistance, wellness programs, tuition reimbursement and discount programs. For more information on why Terex is a great place to work click on the link - Careers | Terex Corporate The compensation range for this position is $22.00-$23.50 per hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

Classification: Exempt Reports to: Quality Manager Direct Reports: NA The Quality Inspector is responsible for performing random inspections in manufacturing departments for in-process and final inspection verification purposes. Performing mini audits throughout the facility to ensure proper identification of raw and finished goods in accordance with the lot traceability and control procedures. Essential Functions/Duties Perform all duties with a safety-first mindset Perform random inspections in manufacturing departments to ensure products are being manufactured correctly according to work orders and drawings provided. Ensure that each department is inspecting parts properly using gages and instruments available. Review in-process inspection records and confirm results recorded by machine operators. Perform mini-audits to ensure lot traceability is maintained throughout the manufacturing process - ensure that every bin or pallet of in-process material always has proper identification back to the work order. Perform mini audits of raw material to ensure each mill tag displays a label to show that it has been properly inspected prior to use. Make sure all gages and instruments used in manufacturing processes are in calibration and if not, bring them to the quality lab to bring current. Work closely with other members of the quality team as well as manufacturing as required to ensure production of high-quality products. Perform other tasks as instructed by quality manager or quality engineer. Competencies Ability to maintain positive relations within all levels of the organization. Ability to communicate, present facts and provide recommendations effectively in oral and written form. Strong organizational skills that reflect the ability to perform and prioritize multiple tasks seamlessly with excellent attention to detail. Proven ability to handle confidential information with discretion, adapt to various competing demands, and demonstrate the highest level of service and response. Ability to work effectively with or without direct supervision as well as independently or in a team environment. Ability to maintain a high degree of professionalism while under pressure and in the face of adversity Work under critical deadlines and heavy workloads to support the critical functions of the company. Ability to prioritize and work with accuracy under stress. Must have a solid working knowledge in Microsoft Word, Excel and Outlook applications. Physical/Cognitive Demands Cognitive abilities required include deductive reasoning, information ordering, oral comprehension, oral expression, problem sensitivity, written comprehension, and written expression. Position Type/Expected Hours of Work This is a full-time position. Required Education and Experience HS Diploma/GED Prior quality inspection experience in manufacturing environment Proficient in MS Office programs, especially MS Excel Preferred Education and Experience N/A Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

The Quality Inspector I, works independently as part of the Quality team inspecting parts. It is the responsibility of the Quality Inspector to communicate inspection results to management as well as Research and Development and Materials Management. Responsibilities: Inspect device components and finished devices follow inspection instructions and established procedures Communicate inspection results to Quality supervision or management as well as R&D / Engineering and Materials Management Filing quality documents and records and maintaining quality files Requirements: Previous hand-held inspection instruments (micrometer, calipers, etc.) preferred Experience with computerized record-keeping (e.g., documents, drawings) preferred Computer literacy with standard software applications, and demonstrates excellent reading, writing and verbal communication skills Requires vaccination against Hepatitis B or signed declination form High school diploma or certificate required 1+ years of Quality Inspection experience preferred

***********PLEASE READ BELOW***************** Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Requirements Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability lift /move 50 pounds Must have reliable transportation

Thompson Engineering is looking for qualified Construction Materials Testing (CMT) Technicians for various locations. This position is responsible for the daily oversight of the construction materials testing and inspection on construction sites to ensure specified standards of quality are met. Preferred candidates would need to be open to travel to various jobs sites and locations as required. DUTIES 1. Utilize a 40 lb. nuclear gauge to run tests on construction materials 2. Obtain concrete samples from the ready mix trucks 3. Make concrete test cylinders 4. Run tests on concrete samples and deliver the samples to the laboratory 5. Observe and record construction crew performance data for related activities 6. Perform visual inspection of rebar 7. Obtain and deliver soil samples from the jobsite to the laboratory 8. Interact with clients and contractors in a professional and ethical manner 9. Ensure that company-owned equipment is maintained in good working order for use on projects and/or assignments 10.Ensure that standards for quality and quantity of work are implemented on all work assignment 11.Establish and maintain a daily diary of all field activities for each project 12.Submit daily reports and other documentation to the Team Leader as required by project specifications and/or applicable criteria 13.Perform all tasks assigned in a professional and ethical manner and according to company policies and procedures 14.Report to the Team Leader corrective actions (when necessary) to best ensure that the quality of work is maintained and meets company standards 15.Follow all written procedures for work being performed 16.Proactively review all project documents and testing procedures, and exhibit comprehension for the technical requirements and procedures necessary to perform the assigned work 17.Prepare reports and perform field activities in a timely manner Other Responsibilities 1. Establish personal goals for improving job performance 2. Ensures on time and regular attendance 3. Attend and actively participate in safety meetings and training programs to further enhance technical capabilities 4. Other duties as required QUALIFICATIONS Minimum Requirements 1. High school diploma or equivalent 2. Six (6) months of experience in construction material testing 3. ACI Level I Certification (must be able to obtain) 4. Nuclear Gauge Certification 5. Communicate effectively with others written and verbally 6. Valid driver's license 7. Ability to read and write in English 8. Preferred candidates will demonstrate flexibility and a willingness to travel to various job sites and locations as required 9. Level and compensation will be commensurate with experience. Physical Requirements 1. Must be willing to work flexible schedules and overtime as needed by the department needs. 2. Ability to lift and carry a minimum of 50 lbs. 3. Drive a company vehicle in a safe manner 4. Pull or push 400 lbs. in a wheelbarrow 5. Walk, stoop, bend, and climb up and down stairs and ladders 6. Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel 7. Work in high grounds and high open buildings 8. Work for extended periods outside in the heat and cold 9. Ability to wear appropriate PPE for hazardous materials About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Title: Construction Materials Testing (CMT) Inspector ***Work Location: Atlanta, GA *** Salary: Based on experience and will be discussed with manager in interview. Duties/Responsibilities : Conduct diverse materials testing and some construction inspections. The materials testing is done mainly in the field, with potential for lab work as needed. Responsible for supporting the company's CEI services for ensuring quality assurance for clients and projects. Some duties include performing moisture and compaction tests using Nuclear Densimeter or sand cone device. Responsibilities include obtaining representative field samples and performing a variety of tests on concrete materials to determine temperature, unit, weight, slump, yield, and air entrainment. Prepare and submit daily field reports. The role entails working in proximity to heavy construction equipment, requiring standing and climbing in and out of deep trenches, exposure to hazardous materials, chemicals, and dust, along with working in adverse weather conditions. You will be required to use appropriate safety equipment and procedures in performing assignments. You will report to the Engineer/Project Manager who reviews work through conferences, observations of work, and overall results achieved. Communicates with the public, other employees, vendors, management, and contractors to relay/review job progress, results of lab/field tests, and scheduling of work. Prepares test results documentation to relay job progress and describe unusual job site conditions. Meets scheduling and attendance requirements. Understands and interprets schematic drawings to locate and record where sampling/testing was obtained. Education/Experience: High School Diploma/GED Knowledge of the properties, characteristics, strengths, and weaknesses of the materials used in construction. 5+years of experience in building construction, construction inspection, paraprofessional engineering work, or work involving construction materials testing. ACI Concrete Field-Testing Technician I, GDOT FCON Certification preferred, Portable Nuclear Gauge user certification. Must have a valid driver's license and be insurable. Physical Requirements: Physically mobile in and around construction sites and field assignments Ability to carry required instruments and equipment. Ability to lift 50 pounds. Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. The worker is subject to variable climate and environmental conditions including but not limited to extreme cold and heat. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

G-O Manufacturing is looking for Quality Control Inspector for our growing manufacturing facility in Bessemer, AL. If you're dedicated and ambitious, G-O Manufacturing is an excellent place to grow your career. At G-O Manufacturing we believe in excellence in all that we do. We are driven by our passion for purpose and a culture that pushes the boundaries of possibilities to distinguish us from other companies and fuel our success. We are manufacturer of premier pull out drawers and shelving for ShelfGenie, the leading Glide-Out Shelving franchise in the USA and Canada. Job Description We are seeking an experienced, dedicated Quality Control Inspector to join our team. In this position, you will maintain quality standards by approving incoming materials, in-process production, finished products, and recording the results. Excellent communication and leadership skills are a must, as well as a keen attention to detail. Responsibilities: Perform minor repairs and cleanup on parts and products. Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the production supervisor Approve all finished products by confirming specifications and conducting required tests Return products for re-work if needed and complete documentation to confirm re-work Document and update inspection results by completing reports and logs Keep measurement equipment operating by following operating instructions and calling for repairs. Maintain safe work environment by following standards and procedures and complying with legal regulations Coach and mentor junior employees; seek opportunities to grow leadership in others Update job knowledge by participating in educational opportunities, reading technical publications, attending seminars, watching industry videos, etc. Accomplish organization mission by completing related results as needed Qualifications: Understanding of manufacturing methods and procedures Must be able to learn and interpret all product types, codes and quality guide info to ensure each product passes its own quality requirements. Hand skills to perform detailed touchup tasks such as appling wood caulk or puddy, light detailed sanding. Removal of residues or ink markings left over from production processing Ability to read a tape measure, use measuring tools/gages and basic math skills Preferred Qualifications: A general working knowledge of wood characteristics. Past experience working in a fast-paced assembly environment as a QA/QC line associate. Skilled at reading technical drawings or blueprints Compensation: $13.00 - $16.00 per hour G-O Manufacturing - We are the manufacturer of premier pull out drawers and shelving for ShelfGenie, the leading Glide-Out Shelving franchise in the USA and Canada. All of our solutions are hand crafted and custom-made in our manufacturing plant in Brighton, just southwest of Birmingham, Alabama. At G-O Manufacturing we believe in excellence in all that we do. We are driven by our passion for purpose and a culture that pushes the boundaries of possibilities to distinguish us from other companies and fuel our success. By providing better access, improved storage and more organizational options, our Glide-Out shelves have allowed homeowners to fall in love with their cabinets and pantries all over again.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Job Description Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is a trusted partner providing single-sourced custom solutions for complex infrastructure development. With over 450 team members, TTL provides civil design, transportation design, surveying, geotechnical engineering, environmental consulting, CEI, and materials testing/inspection/observation services. At TTL, we are driven to serve our clients, our communities, and each other. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual. For more information, please go to *************** Build your legacy at TTL Construction Materials Special Inspector -Multiple Locations TTL is seeking an ICC-certified special inspector to work on projects in the Southeast. Primary duties include performing building inspections and QA/QC testing, including soils, masonry, reinforced concrete, structural steel, fireproofing, etc. Other duties include: Perform on-site observations and inspections to ensure compliance with local building codes Collect samples per project requirements and ASTM standards Perform QA/QC testing on construction materials and building components Follow proper procedures, perform accurate computations, and maintains cordial relationships with coworkers, clients, contractors, etc Requirements ICC certifications, including reinforced concrete, soils, masonry, structural steel, and fireproofing. All five certifications preferred. ACI certification 3 years' experience performing special inspections and testing Ability to communicate professionally orally and in writing. Valid driver's license and good driving record. Proficient in Microsoft Word and Microsoft Excel. Possess sufficient stamina to work in outdoor (hot & cold) environment Job Type: Full-time This position is subject to a pre-employment drug and motor vehicle record check TTL is an EEO/AAP employer

Quality Control Technician - 250002TZ Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Quality Control Primary Location: Alabama-Bessemer Organization: GM - AL Schedule: Full-time Job Posting: Oct 17, 2025, 8:10:12 PM

HWI has a fantastic opportunity to join our Quality Team as a Quality Assurance Technician I. SummaryThe Quality Assurance Technician I plays an integral part in the safe and successful production of refractory brick products at HarbisonWalker Internationals Fairfield plant. This role is responsible for performing quality assurance functions including, but not limited to the inspection of in-coming raw materials and in-process materials checks to assure conformance to specifications and quality/process control procedures. The Quality Assurance Technician I is responsible for documenting the batching, mixing, and manufacturing process, ensuring product consistency and quality, and the final inspection of finished products, prior to shipment to the customer. In addition, the Quality Assurance Technician I maintains a clean and safe work environment as well as maintains professional working relationships with co-workers. Responsibilities Performing physical testing on final monolithic refractory products to confirm products conform to specifications and meet established HarbisonWalker International and customer standards Performing inspection and testing of raw materials to assure conformance to specifications quality/process control procedures; performing in-process testing to ensure product acceptability Recording and maintaining test results and verifying conformance to standards Preparing certificate of analysis or other quality reports Maintaining lab testing and analysis equipment Performing plant product and process quality observations and recording outcomes Requirements Requires high school diploma or G.E.D equivalent Strong computer skills and previous experience using on-line work order/preventive maintenance tracking system Requires interpersonal skills in dealing with coworkers, contractors and vendors Understanding of basic safety/OSHA standards Ability to operate and maintain laboratory instruments Requires math, analytical and problem-solving skills The Quality Assurance Technician I requires zero (0) - two (2) years of manufacturing and/or manufacturing Quality Assurance Technician experience; preferably in a refractory (or similar) operation. Physical and Environmental Requirements Physical Activity: Requires more than 2/3 of time using hands/fingers to handle and/or feel and talking/hearing; 1/3 to 2/3 of time standing, walking and reaching with hands and arms; and less than 1/3 of time sitting, climbing/balancing, stooping, kneeling, crouching, crawling, tasting and smelling. Lifting: Requires lifting to 50 pounds 1/3 to 2/3 of time. Vision: Requires accurate close and distance vision, color vision, peripheral and depth perception and the ability to focus. Environment: Requires more than 2/3 of time working in wet or humid conditions; 1/3 to 2/3 of time working near moving mechanical parts and exposed to fumes or airborne particles; and less than 1/3 of time in an office setting with very limited exposure, exposed to toxic or caustic chemicals, at risk of electrical shock or vibration. Noise: Requires exposure to moderate noise.

PRIMARY FUNCTION: Primarily responsible for verification of production processes, packaging, food safety and monitoring of operational sanitation. Responsible for proper documentation, inventory control, and release of hold product. Assist production Team Members, Team Leaders, and Supervisors in assuring that safe and quality products are produced according to specification. Performs all work in compliance with company policies, NCC Animal Welfare Guidelines and local, state and federal policies, laws and regulation RESPONSIBILITIES AND TASKS: Under minimal supervision, communicate with Production & QA Team Members, Team Leaders, and Supervisors to assure proper handling of all products and timely correction of deficiencies Monitor lines and paperwork throughout the day to assure specification compliance for each product Verify and help enforce GMP's Verify labels, lot codes, bags, boxes, and pallets are correctly adhered, printed, sealed, and stacked Verify receiving of incoming raw materials and ingredients, informs Shipping/Receiving Team Leader and QA Team Leader or QA Coach if any product does not meet specifications Assist Production with day to day quality problems to reach workable solutions Assure microbiological swabs and samplings are performed at correct times and correct positions Assist in making sure all quality and food safety policies and procedures are being followed Work in compliance with all company policies, NCC Animal Welfare Guidelines and local, state and federal policies, laws and regulations All other duties as assigned EDUCATION AND CERTIFICATIONS: High School Diploma or equivalent EXPERIENCE AND SKILLS: Minimum 1 year experience in quality assurance or 6 months WayneSanderson employee Intermediate math (add, subtract, multiply and divide) and computer skills Detail oriented Must have the ability to effectively communicate in English, both verbal and written, with internal and external customers in a timely and professional manner; ability to communicate in multiple languages preferred Sound work ethic, honesty and moral character SAFETY REQUIREMENTS: Follow departmental and company safety policies and programs Must wear Personal Protective Equipment (PPE) at all times in areas where required. PHYSICAL REQUIREMENTS: Stand up to 8 hours. Lift up to 60 lbs. Exposure to wet and dusty environment. Frequently reaching, bending, stooping, kneeling and crawling. Work around raw, live animal odors Ability to work nights, weekends, holidays and extended shift hours We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description The Quality Technician ensures that all compounded products are manufactured in accordance with current Good Manufacturing Practices (GMP) and also meet all internal specifications. This position is responsible for performing a number of manual and automated quality assurance checks on in-process products and finished goods. This position requires strong organizational skills and the ability to prioritize work and respond to customer demands in a timely fashion are critical requirements of this position. This position is responsible for working collaboratively with other personnel in the Quality Department to ensure the highest quality product is delivered to the consumer. Job Activities and Responsibilities: Collect and send samples of compounded sterile preparations (CSPs) for sterility, potency, and endotoxin testing. Conduct environmental monitoring (e.g., air and surface sampling) in cleanrooms to ensure compliance with regulatory standards. Perform visual inspection of finished drug products. Maintain incubation schedules of environmental monitoring sample plates and document results in associated reports and batch records. Maintain accurate and thorough records of all testing and inspections. Ensure all documentation complies with FDA 503B regulations, USP standards, and internal SOPs. Review batch records and verify that all procedures were followed correctly. Assist in internal and external audits to ensure compliance with FDA regulations, USP , USP, and other applicable guidelines. Work closely with the Quality Assurance (QA) team to implement corrective and preventive actions (CAPAs) when non-conformities are identified. Maintain effective communication and partnership with Operations Management department. Participate in root cause analysis to find the sources of defects or quality problems. Ensure that all QC laboratory equipment is properly calibrated and maintained according to the manufacturer's specifications. Review of draft and executed batch records, release of pharmaceutical products, and QA review and approval of product label proofs. Participate in continuous improvement initiatives to enhance the quality control processes and overall product quality. Provide input on QC methods and assist in the development of new testing procedures as needed. Assist with SOP training, personnel training and competency assessments for handwashing/garbing and training of quality technicians. Train other staff members on QC procedures and best practices. Stay current with new regulations, guidelines, and techniques related to quality control in 503B compounding Oversight of validation projects (i.e. equipment, facility, methods, and process), deviation investigations, and CAPA and Out of Specifications (OOS) investigations. Ensure all QC activities comply with FDA 503B requirements and other relevant regulatory bodies. Prepare and review QC sections of regulatory submissions. Under the direction of supervisor/lead, document, initiate, and investigate quality events for deviations and noncompliance. Conduct internal audits and gap analysis of processes, systems, and procedures. Assist with external, regulatory inspections. Maintain quality records (equipment calibration and maintenance, training, deviation and noncompliance investigations, environmental monitoring, Certificate of Analysis, clean room certification etc.). Maintain quality standards by approving incoming materials, in-process production, and finished products. Receive, store, and log in samples for testing analysis. Participate in investigations into any deviations, out-of-specification results, or product complaints. Collaborate with QA to resolve issues and prevent recurrence. Other duties, responsibilities and qualifications may be required and/or assigned as necessary. Qualifications and Education Requirements Compounding, cGMP, and/or laboratory experience preferred High school diploma required and Associates or Bachelor's degree in Health Sciences/Microbiology preferred Must be able to follow gowning/garbing procedures including wearing all protective gear (gown, hair bonnet, mask, beard cover, gloves, goggles) as outlined in site SOPs Strong written communication and interpersonal skills. Demonstrated ability to work in a demanding, high performance work environment and create a positive, team-oriented culture. Must be well organized and detail-oriented with proven initiative and self-starter skills. Must possess problem solving and analytical skills Demonstrated ability to direct individuals and delegate responsibilities and tasks Excellent work ethic, including a personal drive to excel independently. Solid PC skills including Microsoft Office Suite (Word, Excel, Outlook) 20/20 Vision (either aided or unaided) as required by CGMP regulations for visual inspection of finished drug products. Physical requirements: Ability to use a computer and computer-related equipment, printer/fax machine Prolonged periods of sitting and/or standing. Communicate by telephone and email Lift to forty (40) pounds at times. 20/20 vision (either aided or unaided) Benefits: Health care insurance (medical, dental, vision) Life Insurance Supplemental Insurance PTO 401K matching Sick leave

***********PLEASE READ BELOW***************** The Immediate Pay, Quality Inspector position offers individuals the opportunity to receive payment for their work on the same day they perform their duties. This position is designed to provide a quick and fair compensation system for workers who are seeking immediate income. Upon starting the job, workers will be paid for their first day of work (ONLY) at the end of that day. However, it is important to note that if a worker does not show up for their second day of work without prior notice or valid reason, they will be terminated from the position. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Requirements Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability lift /move 50 pounds Must have reliable transportation