Quality control inspector jobs in Pflugerville, TX - 155 jobs

Purpose: This role is responsible for performing preliminary/incoming inspections, hidden damage inspections, in-process inspections, and final inspections on aircraft operated by the airline. Responsibilities: Work with the Director of Quality/Chief Inspector to ensure the Quality Control Procedures outlined in the Berry Aviation, Inc. (BAI) General Maintenance Manual are enforced and followed by all personnel. Work with the Director of Quality/Chief Inspector to establish the policies and procedures outlined in the General Maintenance Manual as they relate to the functions of the inspection department. Ensure that when maintenance is performed in accordance with the Air Carriers manuals and that all required inspection items (RII) have been inspected, documented and marked as a "RII" on all required inspection records, forms and/or maintenance logs. Ensure maintenance personnel have and use the most current aircraft/component manufactures maintenance manuals, technical data, and required forms during maintenance. Ensure that precision tools and test equipment used by maintenance personnel are the proper tools and/or test equipment called out in the applicable maintenance/overhaul manuals and are within the required calibration interval at the time of use. Ensure aircraft parts and/or components removed by maintenance personnel during the course of maintenance activities have been properly tagged listing the correct disposition to prevent the use of rejected and/or unserviceable parts. Ensure the procedures for "Segregation and Handling of Parts" as outlined in the General Maintenance Manual is being followed by all personnel. Perform daily in-process inspections on aircraft undergoing maintenance, repair and/or overhaul to assure all worked performed meets the requirements outlined in the General Maintenance Manual and 14 CFR Part 43. Perform daily in-process reviews of all inspection records, forms and tags to ensure maintenance personnel are signing off inspection checklists progressively and all inspection findings & corrective actions have been documented on the work order with all required information as outlined in the General Maintenance Manual and 14 CFR Part 43. Ensure that only serviceable and airworthy approved parts are installed as part of the maintenance performed by the repair station. Monitor shelf life limited parts and materials used by the airline to ensure out of date items are not used on aircraft. During the daily in-process reviews/Inspections identify maintenance tasks that qualify as a major repair/alteration as outlined in the General Maintenance Manual and 14 CFR Part 43, ensure these tasks are clearly marked on the work order as such. Coordinate with the Lead Mechanic and Director of Quality/Chief Inspector to ensure FAA approved data is available and used to perform the major repair/alteration. Perform maintenance records audit and finial inspection on a civil aviation article once maintenance is complete, this should include the following: Review all inspection records, work orders and forms to ensure maintenance personnel have completed and properly signed off all inspection tasks and cleared all open discrepancies. Ensure all required inspections have been performed and documented as such, this includes any "RII" items. If any major repairs/alterations were performed verify work was performed in accordance with FAA approved data and the corrective action sign off references the approved data. Execute a FAA Form 337 outlining the work performed and forward to the Director of Quality/Chief Inspector for review and approval. If an AFM supplement was included as part of the major repair/alteration, make sure a copy has been placed in the AFM. If any work performed require an update to the current aircraft weight and balance, make sure all required forms have been completed and a copy of the updated weight and balance has been placed in the AFM. If any Airworthiness Directives were complied with verify that the corrective action statement meets the requirements outlined in the General Maintenance Manual. Close out work order package with the required maintenance release and/or return to service statements as outlined in the General Maintenance Manual Any other job-related duties as assigned by the Director of Quality/Chief Inspector. Interpersonal Skills: Must read, write, speak & understand the English language. Must have strong communication skills. Maintain a high level of organization at all times. Must be able to work productively alone or with little supervision. Must be able to follow detailed instructions or Standard Operations Instructions. Must be able to recognize and prioritize any critical tasks in an industry with constantly changing demands. Qualifications Qualifications: Required: Mechanics Certificate with Airframe and Powerplant ratings. 18 months of experience as a Quality Inspector in an Airline environment. 18 months of experience maintaining like aircraft. 6 months of recent experience as a Quality Control Inspector. Proficient in using tools, test equipment, and inspection aids applicable to the scope of work assigned High School Diploma Preferred experience: Turboprop experience on, but not limited to the following airframes: SA226/227 DHC-6 DHC-8 EMB120 ATR42/72 SAAB340 SAAB2000 DO328 King Air Physical Requirements: Incumbent is required to be able to lift a minimum of 50 Lbs. Berry Aviation, Inc. is committed to providing equal employment opportunity in all aspects of the employer-employee relationship. All conditions and privileges of employment are administered to all employees without discrimination or harassment because of race, religious creed, color, age, sex, sexual orientation, gender identity, national origin, religion, marital status, medical condition, physical or mental disability, military service, pregnancy, childbirth and related medical conditions, special disabled veteran status, or any other classification protected by federal, state, and local laws and ordinances. The Company will comply fully with all applicable state or local fair employment laws that forbid discrimination or harassment on the basis of other protected characteristics. All new employees will be required to verify employment eligibility in accordance with the Immigration Reform and Control Act. Berry Aviation participates via E-Verify. For additional information: Click here: **************************************************************** to view the EEO is the Law poster. Click here: ************************************************************************************************ to view the EEO is the Law supplemental poster.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSUMMARY A detail-oriented Laboratory Technician to manage and perform calibration, verification, and maintenance of measurement and test equipment used throughout our manufacturing operations. The ideal candidate will ensure all equipment remains within specified tolerances and complies with internal quality systems and external standards (e.g., ISO 9001, ISO/IEC 17025, or other applicable requirements). ESSENTIAL DUTIES AND RESPONSIBILITIES Perform calibration, verification, and functional checks on a variety of instruments and equipment (e.g., pressure, temperature, dimensional, electrical, torque, and flow devices) Maintain and update calibration records, certificates, and traceability documentation in accordance with internal quality procedures Identify and segregate equipment found out of tolerance Coordinate repairs or adjustments with internal teams or external vendors Develop and maintain calibration schedules to ensure on-time service for all equipment Support root cause analysis and corrective actions for measurement-related nonconformances Work with quality and engineering teams to define calibration requirements for new or modified equipment Ensure all calibration activities meet relevant standards (e.g., NIST traceability, ISO/IEC 17025, or customer-specific requirements) Assist in audit preparation and provide technical support during internal and external audits. Maintain a clean, organized calibration area and follow all safety protocols and environmental procedures EDUCATION AND EXPERIENCE Education: Associate's degree in Metrology, Engineering Technology, Physics, or related technical field (or equivalent experience) Experience: 5+ years performing calibrations or working in a metrology or testing environment Familiarity with measurement principles, uncertainty, and common standards for dimensional, electrical, or mechanical calibration Ability to interpret technical drawings, specifications, and equipment manuals Strong computer skills and experience with calibration management software (e.g., GAGEtrak, IndySoft, or similar) Excellent attention to detail, recordkeeping, and organizational skills Ability to work independently and manage multiple priorities in a manufacturing environment CERTIFICATES, LICENSES, REGISTRATIONS Individuals must be able to perform the duties of the job at a level as generally prescribed and learned by attaining the credentials below. ASQ Certified Calibration Technician (CCT) preferred ASQ Certified Quality Technician (CQT) preferred PHYSICAL DEMANDS Ability to lift and move equipment up to 50 pounds Work may involve standing for extended periods or using fine motor tools Typical work environment: laboratory and production floor MANAGEMENT DISCLAIMER TECO-Westinghouse's Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TECO-Westinghouse may terminate employment at any time, for any reason. Powered by JazzHR 2eMynjmPfm

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: Join our innovative Equipment Quality Team, a dynamic collective of experts dedicated to maintaining the precision and efficacy of high-tech equipment in preclinical and manufacturing domains. Engage with the latest in biomedical devices, industrial instrumentation, and high-end technologies like lasers and RF systems. As pioneers who've crafted a robust equipment program from scratch, we champion creative problem-solving and strive to set industry benchmarks. Immerse yourself in a mission-critical role that propels safety and regulatory compliance to new heights, and become part of a collaborative force driving the future of biomedical quality. Job Description and Responsibilities: Neuralink is seeking an Equipment Quality Technician with a strong knowledge of applied metrolog. This technician will calibrate, repair, and perform preventative maintenance on equipment in the quality program. In addition, they will troubleshoot and repair instruments and systems. This role requires participation in cross-functional teams and some travel. Additionally, you will be expected to: * Calibrate and perform preventive maintenance on any instrument or device in the equipment quality program with little to no supervision * Provide the technical expertise for assisting management in developing work procedures and protocols * Assist in the design, fabrication, check-out, start-up, and acceptance of new or modified equipment * Determine and requisition parts required for maintenance repairs * Adhere to cGxP guidelines, SOPs, and safety rules/regulations * Assist management with determining work schedules and project costs * Work closely with cross-functional team members in regards to continuous improvement activities, solving problems, and improving overall product quality * Explain calibration issues and processes to customers and management when needed Required Qualifications: * Ability to comprehend and apply manuals and schematics for maintenance and troubleshooting * Proficiency in using hand tools, physical/dimensional test instruments, and electronic test instruments * Able to work in a dynamic, fast-paced environment * Strong interpersonal skills: ability to work with colleagues and cross-functional teams in a professional and organized manner * Competence in operating computing hardware and standard software * Minimum of 1 year of experience related industrial instrumentation/calibration experience and/or training, or equivalent combination of education and experience * Willingness to assist with other Quality Engineering activities such as facilities, equipment, and facilities validation Preferred Qualifications: * Experience in PMEL, TMDE, Metrology, Calibration, Instrumentation, Validation, or Biomedical Equipment * Associates or Bachelors Degree in Science, Technology, Engineering, Mathematics or military training in calibration * Relevant experience working in a highly regulated (e.g., GMP, GCP, GLP) environments Expected Compensation: At Neuralink, your base pay is one part of your total compensation package. The anticipated hourly rate for this position is expected to be within the below range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. Texas Hourly Range: $20 - $34/Hr USD What We Offer: Full-time employees are eligible for the following benefits listed below. * An opportunity to change the world and work with some of the smartest and most talented experts from different fields * Growth potential; we rapidly advance team members who have an outsized impact * Excellent medical, dental, and vision insurance through a PPO plan * Paid holidays * Commuter benefits * Meals provided * Equity (RSUs) *Temporary Employees & Interns excluded * 401(k) plan *Interns initially excluded until they work 1,000 hours * Parental leave *Temporary Employees & Interns excluded * Flexible time off *Temporary Employees & Interns excluded

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Plant Quality TechnicianResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Kitchell is currently looking to add a Quality Inspector with Healthcare and Higher Education building experience to join our Texas Division in Austin, Texas. Quality Inspector is responsible for providing primary quality efforts on projects as assigned which include inspection and documentation, technical research, and standards interpretation. This position will have activities in both our Austin and Houston offices. Travel will be 50% daily travel with less than 10% of overnight travel. Duties & Responsibilities General * Provide primary Quality efforts on projects as assigned which include inspection and documentation, technical research, and standards interpretation. * Spend approximately 20% of the time in the office, and the remaining 80% of the time out in the field. * Participate in department and project meetings, publishes meeting notes, and performs topical follow-ups. * Participate in assigned classes and training events. Construction Phase * Conduct Quality Inspections as assigned. * Prepare project inspection reports. * Assist project teams with detail and submittal reviews. * Assist in preparation of and attend Pre-Assembly Meetings. * Observe and document assembly testing when assigned. * Participate in project document management. * Participate in Quality Department document peer review exercises. * Update project schedules and communicate status updates. Pursuit, Preconstruction and Constructability Phase * Assist senior staff with site walks, assembly reviews, and documentation reviews as required. Forensic Phase * Assist senior staff with site walks, assembly reviews and documentation reviews as required. Education and Experience Required * High School Diploma or GED. * A minimum of 10 years of employment in construction with a minimum of 5 years of employment in construction quality. Equivalent Education * Associate's degree (any) and 8 years of construction experience. * Trade school completion or Certification (any) and 8 years of construction experience with a minimum of 5 years in construction quality. * Bachelor's degree (any) and 6 years of construction experience with a minimum of 5 years in quality. Travel Requirement * Employees may travel up to 50% of the time including multi-day and out-of-state travel. * Valid Motor Vehicle License, clean record with no restrictions or suspensions. * Ability to drive a motorized vehicle. * Have and maintain the proper identification required for domestic (US) air travel.

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements. Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies. Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine). Documentation of inspection activities using electronic information systems, written logs, and labels. Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes. Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies. Assist in data analysis and reporting of department metrics as required. Assist with the continuous improvement initiatives. Assist in the resolution of audit findings, observations, and recommendations. Assist with the control and disposition of non-conforming material (MRB). Drive scheduling of day-to-day processes; ensure timely and accurate turnaround. Other QC duties as assigned. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS Associate degree in a technical field preferred. H.S. Diploma or equivalent required. Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required. Experience with AS9100 or ISO9001 Quality Management Systems. Experience with microscopic visual inspection. IPC-A-610 / J-STD-001 certification. Experience with ERP and PLM software systems. Proficiency with reading engineering documents, CAD drawings, and detailed work instructions. Strong digital, written, and verbal communication skills. Strong attention to detail and ability to follow procedures. Strong interpersonal skills and ability to work with others in a positive and collaborative manner. PREFERRED EXPERIENCE Experience in the aerospace or electronics industry. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Austin, TX. Pay is: 1st shift - $19.00 hr 2nd shift - $19.00 hr 3rd shift - $19.00 hr. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development * Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations * Check/inspect manufactured parts or products for defects * Read and follow work instructions and general processes * Use measuring or testing equipment as needed * Ensure products meet quality standards * Display excellent customer service * Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management * Collect and record data Technical * Utilize company portal for time recording and policy acknowledgements Other * Any other duties as assigned Knowledge, skills, abilities Hard skills * Must be able to speak and read in the English language * Good communications skills * Must be able to multi-task * Ability to work in a fast-paced environment * Ability to handle sensitive and confidential material * Ability to walk and stand for long periods of time * Ability to bend, lift, twist and move freely * Ability to periodically lift/move up to 50 pounds * Must have reliable transportation Values & attitudes Global team spirit * Team player * Caring for people * Open-minded Excellence * Reactive * Resilient to pressure * Rigorous Customer focus * Client oriented * Reliable & trustworthy * Flexible Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * No experience necessary * Ability to read blueprints a plus Education background Overall recommendations * High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

We are looking for people to work a 12 hour shift from 6p to 6a. where you will be doing Quality Inspecting of Parts. Working 5 days with 2 days off. Pay is $18. 10 per hour Must have steel toed shoes, Start Monday May 13, 2024Felony Friendly

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance Type:** None/Not Required **Security Clearance Status:** Not Required Collins Aerospace is currently looking to bring on another Inspector II for our San Marcos, TX Site Location. Inspectors perform visual and dimensional inspection of parts, subassemblies, and major assemblies in meeting blueprint and specification requirements. Inspections consist of using standard measuring instruments as well as special measuring instruments and gages. If you have Inspection Skills Consider Joining our Team! **What You Will Do:** + Work 2nd Shift hours (3pm - 11:30pm) Monday - Friday + We offer a shift differential per hours worked on 3rd shift + Ability to work varying shifts, including but not limited to days, weekends, and holidays as required + Perform detailed visual and physical product inspections on in-process and finished goods, including but not limited to First Article Inspections. + Document characteristics of products accurately and with technical detail. + Initiate Quality Notifications for any non-conforming products. + Apply quality assurance procedures and requirements to the inspection of hardware and to document reviews. + Identify any potential quality issues early and help to prevent their occurrence. + Communicate effectively to other Collins Aerospace personnel any quality issues needing resolution. + Reads, interprets and utilizes Quality policies, procedures, blueprints and other documentation. + Self-directed and action-oriented with the ability to work with minimal supervision + Ability to pass color/vision test + Ability to stand for 6+ hours per day + Monitor the use of calibrated measuring instruments. + Safely Perform other duties as assigned **Qualifications You Must Have:** + Typically, a HS Diploma or GED with a Minimum of 1 year of relevant inspection, Assembly or manufacturing experience is required + Experience performing detailed product inspections using blueprints and specifications + Experience in using precision measuring tools, such as micrometers and calipers **Qualifications We Prefer:** + Basic math skills including addition, subtraction, multiplication, division, fractions and percentages + Experience utilizing computer systems including input of data and retrieval of information for inspections and configuration purposes + Experience in reviewing documents and identifying and resolving any errors or missing information + Experience with basic computer skills including the ability to use operating software including SAP + Experience with Basic software applications (CMM and Photogrammetry) + 2+ years in an Aerospace Industry Preferred **What We Offer:** + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! **WE ARE REDEFINING AEROSPACE.** *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. (Select One) **Onsite** : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role is $22- $27hr. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. At Collins, the paths we pave together lead to limitless possibilities. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Build quality from the inside out Imagine stepping into a fast‑paced line where your eye for detail keeps products moving flawlessly. You'll be the guardian of standards-verifying materials, auditing processes, and equipping teammates with the knowledge to do it right the first time. How you'll contribute Continuously monitor product and process performance; champion corrective and preventive actions and long‑term countermeasures. Partner across production, engineering, and quality to ensure consistent output and a culture of excellence. Conduct audits on manufacturing lines against approved processes, procedures, and requirements. Inspect incoming, in‑process, and outgoing materials to CelLink and customer Quality/Engineering specifications. Escalate and communicate emerging/trending issues promptly. Lead containment and sorting; run MRB activities when needed. Advance our Quality Management System with documentation, metrics, and feedback loops. Train operators/inspectors on inspection techniques, quality expectations, and rework. Prepare and review Work Instructions, Quality Alerts, and related quality documentation. Your profile High school diploma required; college degree or equivalent beneficial. 1+ year of quality inspection experience. Skilled in mechanical inspection and precision metrology (calipers, micrometers, thread gauges). Comfortable with Microsoft Office. Resourceful problem solver; enthusiastic about learning. Detail‑oriented organizer who adapts quickly in a start‑up setting. Excellent interpersonal and communication skills; collaborative team contributor with a strong work ethic. Preferred experience ISO 9001, IATF 16949, APQP, PPAP, FMEA familiarity. Lean manufacturing and 5S knowledge. Experience in start‑up environments. Equipment and competencies Calipers and Micrometers Quality Inspection Experience Environment, ergonomics, and PPE Work spans office and manufacturing areas. You'll talk/hear regularly; frequently use hands/fingers to handle tools; and often stand, walk, sit, reach, and push/pull. At times you may climb/balance and stoop, kneel, crouch, or crawl. Must be able to lift/move up to 50 lbs without assistance. Vision requirements include close, distance, color, and peripheral vision, plus the ability to adjust focus. Expect high noise levels and moving equipment on the shop floor, occasional nuisance dust, and skin exposure to machine‑related chemicals. PPE-safety glasses, safety shoes, bump caps, gloves, hair nets, masks, and clean‑room frocks-may be required in accordance with safety procedures. Policy statements **Minimum Qualifications (Knowledge, Skills and Abilities): ** To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Working Conditions/Hours: Hourly Non-Exempt Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.

Our Mission: To provide the safest, highest quality products in our industry. We show dedication to our customers and support the success of their missions through innovations, execution, and an uncompromising commitment to customer support. We can only achieve this mission with the best quality team in the business. We are seeking a dedicated Quality Inspector to join our team and ensure every item meets strict safety and performance specifications. The Role: You will be the impartial third party, using your keen observational skills to verify product compliance and prevent defects. If you thrive on precision, holding everything to the highest standard, and are ready to safeguard our brand reputation and guarantee customer satisfaction, this role is for you. Essential Functions: Ability to interpret engineering blueprints, source control drawings, and OEM part verification. Review of supplier documentation and use of basic precision measurement tools to determine part conformity. Conduct First Article Inspections on all detail parts per AS9102. Use of Syteline ERP software system to process all transactions through inspection. Package parts and label prior to being delivered to inventory. Maintain parts on hold area and work with Supply chain to resolve any documentation problems. Scan paperwork for traceability and historical review. Selects articles for tests as specified stages in inspection process and tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics. Records test data, applying statistical quality control procedures. Work with Engineering support to resolve nonconforming items. Evaluates data and writes reports to validate or indicate deviations from existing standards. Enflite believes that each employee makes a significant contribution to our success. That contribution should not be limited by the assigned responsibilities. Therefore, this position description is designed to outline primary duties, qualifications and job scope, but not limit the individual nor the organization to just the work identified. It is our expectation that each employee will offer his/her services wherever and whenever necessary to ensure the success of our endeavors. Qualifications Job Specifications (Knowledge, Skills and Abilities): Ability to set priorities, meet deadlines, and multitask Excellent organization skills with strong attention to detail Excellent teamwork skills and high degree of initiative required Excellent communication both written and verbal Work independently and possess a high level of self-motivation and initiative Must be proficient with MS Suite (Word, Excel, Outlook) Proficient with ERP/MRP systems Basic knowledge of alloys and material certifications for product acceptance Must be proficient using most precision inspection tools to obtain measurements Education, Certifications and Experience: High school diploma or GED One year of related experience and/or training; or equivalent combination of education and experience Company Benefits: Medical, dental, vision insurance with generous portion of premium paid by Enflite 401(k) with company match Life insurance, disability insurance Paid time off (PTO, Sick, Company Holidays) Annual discretionary bonus eligibility Fun activities each month (past events have included cookouts, baking competitions, cornhole tournaments, water balloon fights) Physical Demands and Work Environment: Working conditions are normal for that of a manufacturing/machine shop/office environment. All employees are expected to adhere to Company safety policies and wear personal protective equipment when exposed to work areas or performing tasks where it is required. Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. The characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The information contained in this job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of the duties that may be required for this position. Additional duties are performed by the individuals currently holding this or similar positions and additional duties may be assigned. EQUAL OPPORTUNITY EMPLOYER

Job Title: Quality Control Inspector (2nd Shift) Reports to: Quality Engineer Location: San Marcos, Texas We have one goal: to manufacture quality magnets! We are looking for exceptional individuals who want to learn, build, and lay a foundation for our company for the years to come. About this role Noveon Magnetics is currently searching for an experienced and highly analytical QC/QA Technician to join our production department. A QC Inspector is responsible for inspecting and testing products throughout the manufacturing process to ensure they meet established quality standards, identifying defects, and reporting any issues to maintain the company's quality control and compliance with industry regulations, often utilizing various testing methods and documenting findings to support continuous improvement initiatives. What good is a job without great benefits to reward your hard work? What We Have To Offer: Competitive Base Medical/Dental/Vision insurance on day 1 of employment Health Saving Account (HSA) with Employer contribution Employee Assistance Program 401(k) retirement plan and match program Short Term Disability (Employer Paid) Long Term Disability (Employer Paid) Paid Time Off (eligible after 90 days of employment) Sick Leave (eligible after 90 days of employment) Company Paid Holidays Diversity At Noveon Magnetics, we believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What You'll Be Doing: Performing visual and physical checks on raw materials, in-process products, and finished goods to identify any defects or non-conformances. Utilizing various testing equipment to measure key product parameters like dimensions, weight, chemical composition, and functionality, ensuring they fall within specified tolerances. Recording inspection results, analyzing data trends using statistical process control (SPC) methods, and identifying potential quality issues. Regularly checking and calibrating measuring instruments to maintain accuracy and reliability. Maintaining detailed records of inspection findings, test results, and non-conformance reports, communicating issues to relevant personnel. Following established quality standards and work instructions to ensure consistency in quality checks. We are looking for someone who: Has a high school diploma or equivalent qualification. Strong attention to detail and ability to identify discrepancies. Technical proficiency with relevant testing equipment and methodologies. Analytical skills to interpret data and identify trends. Excellent documentation and reporting abilities. Knowledge of quality management systems like ISO standards. Basic understanding of statistical process control (SPC). Good communication and interpersonal skills to collaborate with different departments. Physical Requirements: Must be able to pass a drug screening, medical physical and, if applicable, visual testing. Able to move up to 50lbs. Can wear PPE. Comfortable standing for long periods of time, up to and exceeding 60 minutes. Is capable of making repetitive movements including, but not limited to, sitting, squatting and walking up and down stairs. About Noveon Magnetics At Noveon Magnetics, we're reimagining the rare earth magnet industry and changing the way we electrify the world. We're a fast-growing, diverse team of scientists, engineers, entrepreneurs, and innovators from across the globe united by a shared mission to support the commercialization of our magnet manufacturing technology and forge a new path toward resource efficiency, resource independence and a low-carbon economy. As the only U.S manufacturer of permanent rare earth magnets essential to a range of technologies that rely on an electric motor--from electric vehicles to medical devices to aerospace and defense systems to clean energy--we're ushering in an electric future that is 100% Made in America. All our operations, from R&D through production, assembly, and delivery, are conducted out of our state-of-the-art manufacturing center in San Marcos, Texas. Noveon Magnetics is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Promote and adhere to the Mission Statement, Core Values and Behavior Code. Promote company goals with a focus on Safety, Quality, and Production. Utilize Level II NDT Certification in the following disciplines: VT, PT & MT. Apply working knowledge of GD&T principles to inspection techniques. Inspect materials and finished goods to ensure they meet customer requirements and/or contract specifications, including but not limited to checking welds, welding consumables, base material, cut and formed parts, layout work and coatings. Review welding specifications and/or requirements for each project and work with team to solve fabrication challenges. Responsible for dimensional layout of various parts in accordance with fabrication and machining drawings. Utilize a variety of standards for inspection including military standards, ASME Section 9 and AWS D1.1. Demonstrate high proficiency in ability to use calipers, gauges, jigs and other dimensional inspection equipment as well as application for inspection. Document and segregate non-conforming fabricated material and workmanship. Work with management and shop foremen to address remedies for non-conformances and prevention. Support production in resolution of day-to-day issues, as needed. Perform calibration and basic and preventative maintenance on all quality control equipment. Remain current with inspector qualifications, code analysis, industry standards, procedures and processes. Interact with customer and government source inspectors as needed. Represent the company, as needed, on field issues requiring investigation and decisions associated with product quality and conformance. Maintain work area, equipment and supplies in a neat and orderly condition. Perform other duties as assigned; including production support.

Job Posting Start Date 01-13-2026 Job Posting End Date 04-06-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Quality Technician located in Austin, TX. Shift: 6:00am-6:00pm Sunday, Monday, Tuesday and every other Wednesday What a typical day looks like: Audits processes, tests and inspects products and/or develops, compiles and evaluates statistical data to define and maintain quality and reliability of products. Working from engineering drawings, specifications, schematics, diagrams, written descriptions, layouts or defined plans to perform complex engineering testing, checkout, First Article Inspection, root cause research, internal corrective actions and supplier correction actions. Interprets engineering drawings, schematic diagrams or formulas and confers with management or engineering staff to define quality and reliability standards. Selects processes to be audited from primarily the manufacturing areas and checks for a variety of features, including ESD (electro-static discharge) and handling practices, documentation, training and process integrity. Selects products for audits at specified stages in the production or post-production process, and tests products for variety of qualities such as dimensions, performance and mechanical, electrical or cosmetic characteristics. Records audit data, applying statistical quality control procedures. Evaluates data and writes reports to validate or indicate deviations from existing standards. Recommends modifications of existing quality or production standards, programs or reports to achieve optimum quality within limits of equipment capability. Perform calibration on inspection tools e.g. micrometers, calipers height gages etc. Maintain gage track program, print list of gages due for calibration in the beginning of each month and follow up with calibration. Send gages out for calibration, maintain calibration records. Prepares graphs or charts of data or enters data into computer for research data. Download quality information from quality system to be used for QA reports. Research for engineering test results and implements process changes to resolve problems. Performs out of box audits (OBA) as required. Provides factory hold up to identify and resolve issues associated with purchased parts, materials and manufacturing. May be required to perform receiving inspection. Review at the beginning of the shift the Quality Auditors assistance and validated the Check List. Scrap disposition at MRB in less than 24 hours. Assure that the Customer implementation activities are in place. Meet the SSYMA requirements (boats, goggles, gloves, ear plugs). Review the SPC data and confirm the actions are effective. Validate the tooling and gauges are working properly (microscope, magnifier, etc). Qualifications: Requires a High School Diploma or equivalent, technical training, or equivalent experience. Typically requires a minimum of 4 years of related experience. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryQualityRelocation: Not eligible Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Quality TechnicianResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Job Description Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements. Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies. Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine). Documentation of inspection activities using electronic information systems, written logs, and labels. Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes. Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies. Assist in data analysis and reporting of department metrics as required. Assist with the continuous improvement initiatives. Assist in the resolution of audit findings, observations, and recommendations. Assist with the control and disposition of non-conforming material (MRB). Drive scheduling of day-to-day processes; ensure timely and accurate turnaround. Other QC duties as assigned. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS Associate degree in a technical field preferred. H.S. Diploma or equivalent required. Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required. Experience with AS9100 or ISO9001 Quality Management Systems. Experience with microscopic visual inspection. IPC-A-610 / J-STD-001 certification. Experience with ERP and PLM software systems. Proficiency with reading engineering documents, CAD drawings, and detailed work instructions. Strong digital, written, and verbal communication skills. Strong attention to detail and ability to follow procedures. Strong interpersonal skills and ability to work with others in a positive and collaborative manner. PREFERRED EXPERIENCE Experience in the aerospace or electronics industry. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Build quality from the inside out Imagine stepping into a fast‑paced line where your eye for detail keeps products moving flawlessly. You'll be the guardian of standards-verifying materials, auditing processes, and equipping teammates with the knowledge to do it right the first time. How you'll contribute Continuously monitor product and process performance; champion corrective and preventive actions and long‑term countermeasures. Partner across production, engineering, and quality to ensure consistent output and a culture of excellence. Conduct audits on manufacturing lines against approved processes, procedures, and requirements. Inspect incoming, in‑process, and outgoing materials to CelLink and customer Quality/Engineering specifications. Escalate and communicate emerging/trending issues promptly. Lead containment and sorting; run MRB activities when needed. Advance our Quality Management System with documentation, metrics, and feedback loops. Train operators/inspectors on inspection techniques, quality expectations, and rework. Prepare and review Work Instructions, Quality Alerts, and related quality documentation. Your profile High school diploma required; college degree or equivalent beneficial. 1+ year of quality inspection experience. Skilled in mechanical inspection and precision metrology (calipers, micrometers, thread gauges). Comfortable with Microsoft Office. Resourceful problem solver; enthusiastic about learning. Detail‑oriented organizer who adapts quickly in a start‑up setting. Excellent interpersonal and communication skills; collaborative team contributor with a strong work ethic. Preferred experience ISO 9001, IATF 16949, APQP, PPAP, FMEA familiarity. Lean manufacturing and 5S knowledge. Experience in start‑up environments. Equipment and competencies Calipers and Micrometers Quality Inspection Experience Environment, ergonomics, and PPE Work spans office and manufacturing areas. You'll talk/hear regularly; frequently use hands/fingers to handle tools; and often stand, walk, sit, reach, and push/pull. At times you may climb/balance and stoop, kneel, crouch, or crawl. Must be able to lift/move up to 50 lbs without assistance. Vision requirements include close, distance, color, and peripheral vision, plus the ability to adjust focus. Expect high noise levels and moving equipment on the shop floor, occasional nuisance dust, and skin exposure to machine‑related chemicals. PPE-safety glasses, safety shoes, bump caps, gloves, hair nets, masks, and clean‑room frocks-may be required in accordance with safety procedures. Policy statements **Minimum Qualifications (Knowledge, Skills and Abilities): ** To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Working Conditions/Hours: Hourly Non-Exempt Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.

Job Title: Quality Control Inspector (2nd Shift) Reports to: Quality Engineer We have one goal: to manufacture quality magnets! We are looking for exceptional individuals who want to learn, build, and lay a foundation for our company for the years to come. About this role Noveon Magnetics is currently searching for an experienced and highly analytical QC/QA Technician to join our production department. A QC Inspector is responsible for inspecting and testing products throughout the manufacturing process to ensure they meet established quality standards, identifying defects, and reporting any issues to maintain the company's quality control and compliance with industry regulations, often utilizing various testing methods and documenting findings to support continuous improvement initiatives. What good is a job without great benefits to reward your hard work? What We Have To Offer: * Competitive Base * Medical/Dental/Vision insurance on day 1 of employment * Health Saving Account (HSA) with Employer contribution * Employee Assistance Program * 401(k) retirement plan and match program * Short Term Disability (Employer Paid) * Long Term Disability (Employer Paid) * Paid Time Off (eligible after 90 days of employment) * Sick Leave (eligible after 90 days of employment) * Company Paid Holidays Diversity At Noveon Magnetics, we believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What You'll Be Doing: * Performing visual and physical checks on raw materials, in-process products, and finished goods to identify any defects or non-conformances. * Utilizing various testing equipment to measure key product parameters like dimensions, weight, chemical composition, and functionality, ensuring they fall within specified tolerances. * Recording inspection results, analyzing data trends using statistical process control (SPC) methods, and identifying potential quality issues. * Regularly checking and calibrating measuring instruments to maintain accuracy and reliability. * Maintaining detailed records of inspection findings, test results, and non-conformance reports, communicating issues to relevant personnel. * Following established quality standards and work instructions to ensure consistency in quality checks. We are looking for someone who: * Has a high school diploma or equivalent qualification. * Strong attention to detail and ability to identify discrepancies. * Technical proficiency with relevant testing equipment and methodologies. * Analytical skills to interpret data and identify trends. * Excellent documentation and reporting abilities. * Knowledge of quality management systems like ISO standards. * Basic understanding of statistical process control (SPC). * Good communication and interpersonal skills to collaborate with different departments. Physical Requirements: * Must be able to pass a drug screening, medical physical and, if applicable, visual testing. * Able to move up to 50lbs. * Can wear PPE. * Comfortable standing for long periods of time, up to and exceeding 60 minutes. * Is capable of making repetitive movements including, but not limited to, sitting, squatting and walking up and down stairs. About Noveon Magnetics At Noveon Magnetics, we're reimagining the rare earth magnet industry and changing the way we electrify the world. We're a fast-growing, diverse team of scientists, engineers, entrepreneurs, and innovators from across the globe united by a shared mission to support the commercialization of our magnet manufacturing technology and forge a new path toward resource efficiency, resource independence and a low-carbon economy. As the only U.S manufacturer of permanent rare earth magnets essential to a range of technologies that rely on an electric motor--from electric vehicles to medical devices to aerospace and defense systems to clean energy--we're ushering in an electric future that is 100% Made in America. All our operations, from R&D through production, assembly, and delivery, are conducted out of our state-of-the-art manufacturing center in San Marcos, Texas. Noveon Magnetics is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.