Quality control inspector jobs in Pooler, GA

Don't just work somewhere, join Brasseler and be a valued team member of a world-class health care organization! Our Culture: Provides a safe and welcoming environment where team members can balance their lives and develop their careers. All people and experiences are valued and respected. Different perspectives are encouraged and lead to better results. This makes us who we are and enables us to be a world-class healthcare organization. All who join us are accountable to this charge. Our Philosophy: Quality products sold with integrity has been the hallmark of Brasseler USA from the beginning. Brasseler USA's strong reputation of providing high quality, clinician endorsed and innovative dental and medical instrumentation nationally has spanned over 40 years. We have been offering a full-range of products made in the USA since 1976. Many of our products are manufactured at our headquarters in Savannah, GA. Explore our career opportunities below to learn more. KEY RESPONSIBILITIES: · Conduct nondestructive examination and quality control inspections on products, materials, components, parts, etc. at various stages of the production process (85%) · Prepare and complete applicable documentation such as nonconformance reports (10%) · Complete other duties as assigned (5%) SPECIFIC KNOWLEDGE & SKILLS: Experience with measuring equipment in a related support activity is preferred Experience in the medical device industry is preferred GENERAL SKILLS & COMPETENCIES: Strong time management skills and the ability to prioritize work and meet deadlines Very good attention to detail and accuracy Customer service oriented and the ability to work with complex issues Ability to plan and arrange activities Very good interpersonal communication skills Very good written and verbal communication skills Ability to maintain confidential and highly sensitive information Ability to work in a team environment Ability to multi-task Ability to manage conflict Capacity to work effectively under pressure Establish productive working relationships at multiple levels within the organization MINIMUM WORK EXPERIENCE: Typically 3 or more years of related experience. PREFERRED EDUCATION: Typically High School education, vocational training and/or on-the-job training. TRAVEL / PHYSICAL DEMANDS: Travel typically less than 10%. Position typically works in a production environment on-site where environmental conditions are stable. May be exposed to higher levels of noise typical in a manufacturing environment. Position requires that the employee use special eye protection at all times while on the production floor and working with equipment. Benefits available include: Medical, Dental and Vision Coverage, 401K Plan with Company Match, Generous Time Off, Paid Parental Leave, Income Protection, Work Life Assistance Program, Flexible Spending Accounts, Educational Benefits, Worldwide Scholarship Program and Volunteer Opportunities. *Benefits may vary by location or status. Henry Schein is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status. Fraud Alert Henry Schein has recently been made aware of multiple scams where unauthorized individuals are using Henry Schein's name and logo to solicit potential job seekers for employment. Please be advised that Henry Schein's official U.S. website is ******************* . Any other format is not genuine. Any jobs posted by Henry Schein or its recruiters on the internet may be accessed through Henry Schein's on-line "career opportunities" portal through this official website. Applicants who wish to seek employment with Henry Schein are advised to verify the job posting through this portal. No money transfers, payments of any kind, or credit card numbers, will EVER be requested from applicants by Henry Schein or any recruiters on its behalf, at any point in the recruitment process.

Job Details Port Wentworth , GA Full-Time/Part-Time NightQuality Assurance - Birkenhead B Quality Assurance DSI is seeking dedicated and detail-oriented Quality Assurance professionals at multiple levels (I, II, III, and Senior) to join our dynamic team. The Quality Assurance team plays a vital role in ensuring our inventory and processes meet the highest standards of quality and compliance. The ideal candidates will demonstrate a strong commitment to quality, attention to detail, and the ability to work collaboratively across teams. Position Summary Quality Assurance team members are responsible for ensuring accuracy, compliance, and operational excellence in all inventory and shipment processes. Responsibilities increase with each level, from performing inspections and documentation to mentoring team members and driving process improvements. DSI's second shift schedule hours are 4:00 PM to 12:30 AM. Key Responsibilities by Level Quality Assurance Level I: Proficient in Standard Operating Procedures: Execute DSI Standard Operating Procedures (SOPs) related to inspecting, staging, securing, loading, manifesting, and sealing export containers. Documentation Practices: Ensure complete and accurate documentation, including photo-documentation for shipments. Technology Use: Operate RF devices and tablets efficiently for inventory and shipment management. Safety Compliance: Adhere consistently to all DSI safety protocols. Team Collaboration: Demonstrate a positive attitude and work effectively within the team. Quality Assurance Level II: Performance Standards: Maintain a clean record with no performance, safety, behavioral, or attendance warnings in the past 90 days. Loading/Unloading Skills: Conduct timely inspections, loading/unloading trailers and railcars, and accurate documentation. Inventory Control Expertise: Demonstrate proficiency in cycle counting and strong knowledge of inventory control processes. Team-Oriented Mindset: Maintain a TEAM-first attitude, willingly taking on various roles as needed. Workstation Organization: Keep the workstation organized to professional standards. Effective Communication: Exhibit strong, clear communication skills within the team. Quality Assurance Level III: Performance Consistency: Maintain a spotless record for performance, safety, behavior, and attendance over the past 90 days. Operational Discipline: Prioritize workflow control and operational discipline in the assigned work area. Exceptional Communication: Demonstrate outstanding communication skills that enhance team dynamics. Team-Focused Attitude: Uphold a TEAM-first approach in all tasks and interactions. Trainer Certification: Complete train-the-trainer certification to mentor and train fellow team members. Senior Quality Assurance: Exceptional Performance: Exhibit leadership and outstanding performance in quality assurance practices. Deep SOP Knowledge: Demonstrate expertise in SOPs, documentation practices, technology systems, safety protocols, and inventory processes. Operational Discipline: Ensure efficiency and accuracy by prioritizing workflow discipline. Leadership & Communication: Mentor and train junior team members, showing strong leadership and communication skills. Continuous Improvement: Actively identify opportunities for process improvement and innovation. Senior-Level Responsibilities: Take on strategic responsibilities, including leading physical inventories with customers. Qualifications High school diploma or equivalent. Relevant certifications as required per level. Experience in quality assurance or material handling operations preferred. Strong attention to detail and commitment to safety and compliance. Ability to work efficiently in a fast-paced environment. Proficiency with RF/tablet technologies. Excellent communication and teamwork skills. Benefits Competitive salary. Health, dental, and vision insurance. Retirement savings plans + company match. Paid Time off. Opportunities for professional development and career advancement. Why Join DSI? At DSI, we believe our employees are our greatest asset. If you are passionate about safety and training, and ready to make a significant impact in a dynamic logistics environment, we invite you to apply and join our dedicated team

Job Description Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Job Posted by ApplicantPro

Job Description Title: Quality Team Member Reports to: Manager Department: Quality The Quality Team Member operates within a dynamic, fast-paced environment, performing repetitive quality-related tasks on a seat manufacturing assembly line, as well as in receiving and shipping areas. Utilizing specific tools and devices, the role ensures precise tolerances and requirements are met to always uphold the highest quality standards. Responsibilities (including but not limited to): Support the Quality Department in maintaining the highest quality standards for all parts, products, and finished goods. Inspect finished products before transitioning to the next department or holding area. Conduct layered audits and quality checks. Generate detailed quality reports as necessary. Collaborate with Supervisors to address production or processing issues. Work with department Supervisors and Managers to establish and monitor product standards, including examining raw product samples and directing testing during processing. Review parts to determine if they meet quality standards. Assist in setting up and calibrating gauging and measuring devices; provide training to floor associates on device usage. Track parts and manage scrap. Package finished products and prepared them for shipment as needed. Rotate through all tasks required in a particular production process. Ensure proper adherence to 5-S principles. Perform various operations within the group to maintain workflow. Adhere to Quality policies and standards, including ISO 9001, TS16949, IATF16949. Follow all environmental, health, and safety policies. Fulfill other assigned duties. Qualifications: Broad knowledge of quality systems, including TS16949, ISO, QS; experience in continuous improvement, Kaizen, 5-S, lean manufacturing, KANBAN, TPS. Quality experience in an assembly and manufacturing environment. Ability to pass X Rite color hue test. 1+ year of relevant experience. Technical/Computer Skills: Identify visual defects and contribute to quality decisions. Properly use quality gauges, tools, and devices. Strong problem-solving skills. Good interpersonal and communication skills. Proficient in math, reading, and writing. Education: High School Diploma or GED preferred Physical Demands: The physical requirements outlined below are indicative of those necessary for an employee to effectively carry out the essential functions of this job. Reasonable accommodations may be provided to facilitate individuals with disabilities in performing these essential functions. Regularly engage in talking and hearing. Involve heavy walking and standing throughout the shift. Frequently bend at the knees and waist. Utilize hands for typing, handling objects, and managing paperwork. Engage hands in typing, writing, handling objects, boxes, equipment, tools, and paperwork. Reach and hold items at chest level or above the shoulder. Lift and carry objects weighing 50 lbs. to 75lbs. may be necessary. Wear safety Personal Protective Equipment (PPE) for eyes, face, head, feet, hearing, hands, and arms as required. Use close vision, peripheral vision, focus, and discern colors as needed for reading equipment and material labels, color-coded inventory, computer terminal screens, etc. Demonstrate a willingness to travel for training if required (domestic/international). Ability to work overtime and/or weekends as needed. Flexibility to work a fixed or rotating schedule. Hyundai Transys Georgia Seating System is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Hyundai Transys Georgia Seating System is committed to achieving a diverse workforce through the application of its equal opportunity, non-discrimination, and anti-harassment policies in all aspects of employment including recruitment, hiring, promotions, transfers, discipline, terminations, wage and salary administration, benefits, and training. All employment decisions at Hyundai Transys Georgia Seating System are based on business needs, job requirements, and individual qualifications without regard to race, color, religion or belief, sex, sexual orientation, gender identity, family or parental status, national origin, veteran status, disability, or any other status protected by the laws or regulations in the locations where we operate. This Position Description is intended as a summary of the job responsibilities for this position. HTGSS reserves the right to add, remove, and/or alter job responsibilities in whole or in part with or without notice. Additionally, all HTGSS team members are subject to all other HTGSS policies and procedures, including those set out in HTGSS's Team Member Handbook. This Position Description is not a contract. Every Team Member's employment with HTGSS is voluntary and is subject to termination by the team member or HTGSS at will, with or without cause, and, with or without notice, at any time. Nothing in this Position Description or HTGSS policies shall be interpreted to be in conflict or to eliminate or modify in any way the employment-at-will status of HTGSS team members.

Job Title: Shop Inspector IV -Podding Working Pattern: Onsite Working Location: Savannah, GA As the Shop Inspector for Rolls-Royce Savannah Podding, you will ensure that work performed complies with all applicable Regulations, Quality Procedures (QP's), and local work instructions (LOP's). You will perform incoming inspections of all Powerplant modules, review related paperwork and build cards to ensure that workmanship meets acceptable standards and documentation is complete and accurate, and subsequently release the Powerplant for delivery to the customer. The Shop Inspector will advocate and promote company policies that include, but are not limited to, product safety, safe work practices, and other Rolls-Royce values and behaviors. The Shop Inspector should have knowledge of disassembly, repair and re-assembly of Rolls-Royce gas turbine engines and components. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing: Operate precision tools and equipment to perform accurate dimensional checks without error Coordinate vendor rework activities on non-conforming materials Conduct audits of build documentation for accuracy and completion in accordance with applicable procedures and standards Track audit findings and implement corrective actions as necessary Read and interpret blueprints and engineering drawings Perform incoming inspections on all Powerplant Modules with ability to lift engine components weighing up to approximately 50 pounds Verify all build documentation is closed in accordance with applicable requirements Maintain all training requirements to hold Shop Inspector stamp authority Act as Trainer to mentor and develop inspectors and technicians within the Podding team Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: High school diploma or equivalent with 4+ years of experience in gas turbine engine components and FAA Airframe & Power Plant License, OR Associate degree with 3+ years of experience in gas turbine engine components and FAA Airframe & Power Plant License In order to be eligible for consideration, you must be a U.S. Citizen or U.S. Permanent Resident Preferred Requirements: Proficient with Microsoft Office Suite Gas turbine and nacelle experience Strong leadership skills with experience Aviation inspection / product release experience Experience with Rolls-Royce build documentation What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Relocation assistance will be provided if applicable. Closing date: December 19, 2025 Job CategoryField Services Job Posting Date15 Dec 2025; 00:12 Pay Range$32.69 - $49.04-Hourly Location: Savannah, GA Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Job DescriptionDescription: We are seeking a detail-oriented Quality Inspector to join our team in Ellabell, Ga. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Requirements: Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Use of inspection tools and equipment. Strong understanding of automotive interior parts and components. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to work independently with minimal supervision while maintaining a team-oriented approach.

SUMMARY: Quality Assurance Inspector is responsible for ensuring production standards are met and maintained for products before they leave the facility. This is achieved by continuously evaluating the product through highly accurate inspection, reporting and recording of deficiencies found. DUTIES AND RESPONSIBILITIES: Support quality initiatives for the Hyundai and Kia product lines. Provide quality assurance support to the Hyundai and Kia door module, latch, and other platforms. Provide shop floor support to quality assurance specialists and production by accurately reporting and recording quality issues. Travels to customer locations to address quality issues when necessary. Coordinates the containment of defective material. Maybe assigned to perform incoming inspection of components. Maybe assigned to perform some production support duties. Performs other related duties as assigned by management. QUALIFICATIONS: High school diploma or general education degree (GED) Required skills: Ability to utilize computer applications such as Microsoft Office suite. At least one year's experience in a production environment. Ability to work overtime on short notice. Good communication skills. Ability to work in a team environment. Other skills preferred but not required: Familiar with blueprints, dimensional check fixture gaging, GD&T, handheld measuring tools. Math and algebra skills are highly desired. Good handwriting skills. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Continually stand or walk >90% of work time. Continually required to talk, hear, write. Required to utilize hand and finger dexterity. Frequently lift and or move up to 30 lbs. Performing duties of this job the noise level in the work environment is usually moderate. Specific vision abilities required by this job include close vision inability to just focus. The work area is heat/air conditioned within an office environment, with 100% of the time spent in a shop floor environment.

The position of Quality Assurance Technician reports to the Quality Assurance Supervisor/Manager. The QA Technician determines the chemical and physical characteristics of raw materials, intermediate bulk products, finished products and experimental products using SOPs and following GMP principles. Specific Duties and Responsibilities: Obtains test samples of incoming lots of chemical raw materials, in-process intermediates and production batches. 2. Maintain clean, efficient and properly operating laboratory equipment. Ensure all instruments used in product quality testing meet calibration requirements followed by written SOPs. Maintains QA's Material Safety Data Sheets (MSDS) and Certificates of Analysis (COAs) on all chemical raw materials. Perform inspections on incoming materials and review final products to ensure quality specifications are met. Will use test equipment to evaluate the materials or products and records data from test procedures and inspections. Collect, label and ship microbiological samples. Collect product samples from production filling lines and maintain storage of retained samples. Maintain a close working relationship with production personnel to provide a smooth, efficient production flow of quality products. Ensures the cleanliness of production filling lines following GMP procedures. Auditing production-filling lines for accuracy of fill weighs, lot number and proper paper work. Communicate to QA Supervisor or QA Manager persistent or difficult quality problems. Education/Experience: B.S/B.A in Chemistry or other scientific field

Job Description Quality Inspector Status: Full Time, Non-Exempt Schedule: 40 Hr Seoyon E-Hwa is a leading automotive parts manufacturing company specializing in precision injection molding solutions. Dedicated to innovation and excellence, our primary focus involves offering Tier 1 manufacturing support to the automotive OEM's. As we expand our operations, we are seeking a talented Quality Inspector to join our dynamic team at the Client Site. Position Overview: We are seeking a meticulous and detail-oriented Quality Inspector to join our team at Seoyon E-HWA Manufacturing Savannah, a leading manufacturer of automotive interior parts. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Candidates must be willing and able to perform duties at the client site as part of their responsibilities. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Perform both visual and dimensional inspections using tools such as calipers, micrometers, gauges, and other measuring instruments. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Record inspection results, track non-conformities, and maintain detailed reports for compliance and traceability. Communicate quality issues to production staff and assist in root cause analysis and corrective actions. Ensure compliance with all relevant industry standards, customer specifications, and regulatory requirements. Assist in the development and implementation of inspection procedures and work instructions. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Perform audits on raw materials and finished products to ensure consistency in quality across all production stages. Support internal and external audits as required. Participate in continuous improvement initiatives and suggest process enhancements to improve product quality. Qualifications High school diploma or equivalent; additional certification in Quality Control or Engineering is a plus. Previous experience in quality inspection, preferably in the automotive or manufacturing industry. Strong understanding of automotive interior parts and components. Proficiency with measuring instruments (calipers, micrometers, gauges, etc.). Familiarity with quality standards such as ISO 9001, TS16949, or similar. Excellent attention to detail and a keen eye for identifying defects or deviations. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to read and interpret technical drawings, specifications, and blueprints. Basic knowledge of statistical process control (SPC) and quality improvement techniques. Ability to work independently with minimal supervision while maintaining a team-oriented approach. Physical Requirements: Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Manual dexterity for using inspection tools and equipment. Benefits: At Seoyon E-Hwa, we believe that our success is driven by the well-being and satisfaction of our employees. We are committed to fostering a positive and inclusive workplace where every team member can thrive. Medical/Dental/Life Insurance 401k Paid Time Off Paid Holidays Seoyon Ehwa Manufacturing Savannah Inc is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Blythe Construction has lead development in North and South Carolina for over 90 years since our company's founding in 1921. In that time, our many generations of employees have completed thousands of contracts, from large highways to small commercial site development. Our company's history is one of continued evolution and growth. Beginning as a small independent asphalt development company, Blythe expanded its resources and influence through significant mergers throughout many years, eventually becoming part of the Vinci USA network extending from as far north as Maine to as far west as Texas. Description The Quality Control Asphalt Mix Design Technician will work under the direction of the Quality Control Manager in the formulation and implementation of asphalt mix designs/job mix formulas at the asphalt plants. Key Duties * Follow the directions and instructions of the Quality Control Manager. * Conduct sampling and testing in accordance with applicable SCDOT, AASHTO, and ASTM standards. * Perform daily equipment verifications as instructed by the Quality Control Manager. * Perform or assist in performing all necessary equipment calibrations as directed by the Quality Control Manager. * Testing of samples in accordance with applicable specifications, QC Plan and Quality Management System requirements. * Care and maintenance of all laboratory equipment and inventory. * Keeping the laboratory in a neat, clean and orderly fashion. * Accurate reporting of test results on their proper forms. * Completion of all documentation used to report test results (i.e. - worksheets, sample and test logs, Certificate of Analysis, etc.). * Disposal of waste material upon completion of testing. * Assist plant personnel during batch production as necessary to insure product quality control objectives are met (process control testing). * Communicating batch test results and certifications to plant personnel * Assist the Quality Control Manager in meeting compliance reporting requirements timelines as outlined in the QC plans and Quality Management System. * Assist other technicians and employees as needed * Attend and complete training as required (company, certification, etc.). * Other activities as assigned by the quality control manager Qualification Requirements * General. To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Education and Experience. This position typically is not an entry-level job, as it requires demonstrable previous experience as a Quality Control Asphalt Lab Technician and experience with formulating asphalt mix designs/job mix formulas. * SCDOT HMA Level 2 Job Mix Technician certification. * Working proficiency in Microsoft Excel, Word and Outlook. * Familiarity with SCDOT, AASHTO, and ASTM specifications for asphalt emulsions, asphalt materials and testing. * Possess a working understanding of statistical process control. * Ethical professional and behavioral standards. * Physical Demands. The following physical demands are representative of those that must be met by a Laboratory Technician to successfully perform the essential functions of this job. * Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. * Frequently walk on uneven surfaces, including natural ground in varying weather conditions. * Work Environment. The work environment characteristics described below are representative of those that a Laboratory Technician encounters while performing the essential functions of this job. * Work is performed predominantly indoors. * Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project. Company Benefits: * Company Paid Basic Life Insurance * Company Paid Long Term Disability Policy * Company Paid Vacation & Holiday Pay * Company Paid Parental Leave * Company Paid Maternity Leave * Company Paid Employee/Family Assistance Program (EAP) * Voluntary Medical & Vision Insurance * Voluntary Dental Insurance * Voluntary Short Term Disability * Voluntary Supplemental Term Life * Voluntary Accident, Legal, Hospital, Critical Illness Policies * 401(k) Plan w/Employer Match * Annual Company Stock Purchase Opportunities * Discount Partnerships: Verizon, Ford, Perkspot * Health and Wellness Benefits, including Monthly Gym/Fitness Incentives We promote a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply. Blythe Construction, Inc. - Hubbard Construction Company - Northeast Paving - Sunmount Paving - Virginia Paving Company, are hereby referred to as Vinci Construction USAAccessibility: If you need an accommodation as part of the employment process please contact Human Resources at Blythe Construction, Inc.: Phone: ************Hubbard Construction Company: Phone: ************Eurovia Atlantic Coast, LLC:Phone: ************ Vinci Construction USA is an Equal Opportunity Employer.Vinci Construction USA is committed to providing a fair and equal employment opportunity workplace. All hiring and promotional decisions are made without regard to race, color, religion, sex (including pregnancy), genetic information, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other status that is protected by federal, state, or local law. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

We are seeking a Quality Control Specialist to join our team and play a pivotal role in ensuring the quality and reliability of our products. The successful candidate will be responsible for a range of document preparation tasks, import inspections, process inspections, and final product inspections. Key Responsibilities: Process Preparation Prepare management plans to guide quality assurance processes. Develop inspection standards to maintain consistent product quality. Generate Initial Sample Inspection Reports (ISIR) for 4M change situations. Request regular testing from customers to validate product quality. Identify the root causes of quality issues and formulate improvement strategies. Ensure that measuring and testing equipment is properly calibrated and in good working condition. Report any equipment malfunctions and coordinate maintenance as needed. Inspections: Conduct import inspections for resin materials in the molding process. Perform import inspections for paint materials used in our products. For Molding: Measure moisture content after drying resin. Inspect ultra-small and medium-sized products for quality compliance. Conduct final shipment inspections to ensure product quality. For Painting: Perform process circuit inspections. Measure coating thickness and assess adherence to quality standards. Perform final shipment inspections to verify paint quality. For Assembly: Inspect finished products to ensure they meet quality standards. Approve or reject parts based on inspection and testing results. Release products that meet quality standards for further processing or shipment. Qualifications: Bachelor's degree in a relevant field or equivalent experience. Proven experience in quality assurance and inspection processes. Strong attention to detail and problem-solving skills. Excellent communication skills to collaborate with cross-functional teams. Knowledge of quality management systems and standards is a plus. Benefits: Health insurance (medical, vision, and dental) 401K Relocation Bonus Opportunity to drive significant changes with an ability to make an impact across the organization

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Geotechnical team in Hilton Head, SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. You'll document findings in line with engineering best practices and building codes-helping ensure quality and compliance from the ground up. Join our Geotechnical Services Group and play a key role in construction and site development projects across the region! Responsibilities * Improvement/Innovation: Accept changes at work and provide support when asked. * Health, Safety, and Environment: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. * Performance Management: Complete allocated work to the required standards of quality and timeliness; use performance management systems to improve personal performance. What you will bring to the team: * High school diploma or GED certificate * Experience in field testing of soils, aggregate, concrete, asphalt, and masonry preferred but training will be provided on the job * Certification in at least one of the following is preferred: ACI, NICET, ICC, SCDOT * Good mechanical aptitude and troubleshooting abilities preferred * Able and willing to travel and work outdoors at job sites #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Title: Machining First Inspector Department: Machining Type: Full Time Other: Machining Manager Reports to: Machining Supervisor Status: Non-Exempt Salary Range: Per Wage Scale Direct reports N/A Astemo Rock Spring, Inc. was established in 2000 and supplies aluminum knuckles to Honda and Subaru. We are in Rock Spring, GA, and operate on 3 shifts with 400 employees. We have three main manufacturing departments, Casting, Machining, and Press Assembly. We are part of Astemo, Inc. with 90,000 employees worldwide. Tasks and Responsibilities: This quality assurance position is responsible for the final inspection of Aluminum parts and Brake Component Parts. Uses gauges, markers, fixtures, jigs, calipers or any other measuring device to ensure parts meet customer requirements. • The Machining 1st Inspector will support and aid in the Quality of parts per line(s). • Making sure we are in Quality Compliance with the Quality of our part. • Complete part quality checks in compliance with the standard for each model • Support the review and disposition of defective parts • Support confirming check sheets are complete. This position will also require that the person understands and can perform testing as directed by the Quality team. When accomplishing tasks, remember to work toward meeting overall company goals established which include, OSHA safety compliance, ISO 14001 Environmental Compliance, Ethical & Legal compliance, Customer Quality, Production to Plan, and Delivery Performance. Safety & Environmental: • Promotes a safety first attitude and provides safe work environment by obtaining knowledge and then following all required OSHA regulations which may or may not include: Personal Protective Equipment, LOTO, Crane, Powered Lifts, Machine Guarding, Chemicals, Fall Protection, Fire Protection, Incident reporting, Respirator, Hearing conservation, Confined Spaces, and others. • Coordinates safety and environment repair activities. Quality: • Assist to ensure that parts knowledge and training is completed where needed. • Follows work instructions and point cards and other direction as given. • Ensures quality requirements and packaging requirements are met. • Ensures associates understands and follows all change point procedures and completes all required documentation. Delivery: • Responsible for ensuring the accuracy quantity and labeling of lot tags as they are packed for shipment to assembly • Responsible for communication to production management any concerns. • May use pallet jacks for material movement. Productivity: • Timely completion of tasks. • Suggest and Implement improvement ideas. • Cross trained in various location selected positions in one or more departments. Reporting: • Supports Business Plan Targets and monitors measurable goals based on Business Plan objectives. • Reports quality issues to quality department and production issues to Manufacturing department Preferred Skills: • Blue Print reading, hand tools use, Measuring tools experience • Good problem-solving abilities • Excellent communication skills, able to build friendly work relationships • Familiar with manufacturing concepts, practices and procedures • Proficient in Microsoft Excel and other office programs (a plus) Minimum Experienced Preferred: • HS Diploma or GED Previous experience in related field 2-5 years Astemo experience (desired) Key Metrics Responsibility: • Zero quality claims • Zero late shipments • Zero safety incidents • Others as required to meet Business Plan objectives Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, to use hand to finger; handle or feel objects, tools or controls. Occasionally required to walk, reach with hands and arms, stoop, kneel, crouch or crawl, talk or hear. • Requires regular lifting of weights up to 5 pounds and occasional lifting of up to 40 pounds. • Requires repetitive lifting (>700 each shift) of weights up to 15 pounds and occasional lifting of up to 40 pounds. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected, and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. Equal Opportunity Employer (EOE) - Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender, identity, disability, protected veteran status and national origin. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. If you need a reasonable accommodation to apply for a job at Astemo, please send the nature of the request and contact information to ************************* when applying for the position.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Geotechnical team in Hilton Head, SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. You'll document findings in line with engineering best practices and building codes-helping ensure quality and compliance from the ground up. Join our Geotechnical Services Group and play a key role in construction and site development projects across the region! Responsibilities Improvement/Innovation: Accept changes at work and provide support when asked. Health, Safety, and Environment: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. Performance Management: Complete allocated work to the required standards of quality and timeliness; use performance management systems to improve personal performance. What you will bring to the team: High school diploma or GED certificate Experience in field testing of soils, aggregate, concrete, asphalt, and masonry preferred but training will be provided on the job Certification in at least one of the following is preferred: ACI, NICET, ICC, SCDOT Good mechanical aptitude and troubleshooting abilities preferred Able and willing to travel and work outdoors at job sites #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

*RS Sr Inspector A&P - 2nd Shift in GAC Savannah* *Unique Skills:* Second/Evening Shift Monday through Thursday. Gulfstream Large Cabin Experience Preferred; Flight Safety Initial Preferred but not Required; Must be Able to Lift 50 Lbs, Must be Able to Work from Ladders, Stands, and Heights; Must be able to Occasionally Work in Confined Spaces; Must be Proficient with Computers. *Education and Experience Requirements* High School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 2 years of relevant Gulfstream aircraft experience and 2 years of aircraft inspection experience. A&P (FAA Airframe and Powerplant) license required. *Position Purpose*:Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. *Job Description* Principle Duties and Responsibilities:Essential Functions: * Responsible for Quality Control inspections on aircraft/components . * Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . * Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . * Keeps accurate, neat and legible records of the work performed on aircraft/components . * Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . * Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . * Ensures aircraft/components are airworthy prior to any flight activities . * Mentors technicians on effective documentation . Additional Functions: * Communicates with management as required. to identify work assignments and delivery schedules . * Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned.Other Requirements: * Strong computer skills. * Knowledge of inspection and maintenance procedures for various aircraft models and systems. * Knowledge of pertinent technical reference materials. * Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. * Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. * Must be able to read, write, speak, and understand the English language. *Additional Information* Requisition Number: 229335 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 11/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. [Legal Information]( | [Site Utilities]( | [Contacts]( | [Sitemap]( Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. [A General Dynamics Company]( Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Job Details Garden City, GA Full-Time/Part-Time DayQuality Assurance - Brampton Quality Assurance DSI is seeking dedicated and detail-oriented Quality Assurance professionals at multiple levels (I, II, III, and Senior) to join our dynamic team. The Quality Assurance team plays a vital role in ensuring our inventory and processes meet the highest standards of quality and compliance. The ideal candidates will demonstrate a strong commitment to quality, attention to detail, and the ability to work collaboratively across teams. Position Summary Quality Assurance team members are responsible for ensuring accuracy, compliance, and operational excellence in all inventory and shipment processes. Responsibilities increase with each level, from performing inspections and documentation to mentoring team members and driving process improvements. Key Responsibilities by Level Quality Assurance Level I: Proficient in Standard Operating Procedures: Execute DSI Standard Operating Procedures (SOPs) related to inspecting, staging, securing, loading, manifesting, and sealing export containers. Documentation Practices: Ensure complete and accurate documentation, including photo-documentation for shipments. Technology Use: Operate RF devices and tablets efficiently for inventory and shipment management. Safety Compliance: Adhere consistently to all DSI safety protocols. Team Collaboration: Demonstrate a positive attitude and work effectively within the team. Quality Assurance Level II: Performance Standards: Maintain a clean record with no performance, safety, behavioral, or attendance warnings in the past 90 days. Loading/Unloading Skills: Conduct timely inspections, loading/unloading trailers and railcars, and accurate documentation. Inventory Control Expertise: Demonstrate proficiency in cycle counting and strong knowledge of inventory control processes. Team-Oriented Mindset: Maintain a TEAM-first attitude, willingly taking on various roles as needed. Workstation Organization: Keep the workstation organized to professional standards. Effective Communication: Exhibit strong, clear communication skills within the team. Quality Assurance Level III: Performance Consistency: Maintain a spotless record for performance, safety, behavior, and attendance over the past 90 days. Operational Discipline: Prioritize workflow control and operational discipline in the assigned work area. Exceptional Communication: Demonstrate outstanding communication skills that enhance team dynamics. Team-Focused Attitude: Uphold a TEAM-first approach in all tasks and interactions. Trainer Certification: Complete train-the-trainer certification to mentor and train fellow team members. Senior Quality Assurance: Exceptional Performance: Exhibit leadership and outstanding performance in quality assurance practices. Deep SOP Knowledge: Demonstrate expertise in SOPs, documentation practices, technology systems, safety protocols, and inventory processes. Operational Discipline: Ensure efficiency and accuracy by prioritizing workflow discipline. Leadership & Communication: Mentor and train junior team members, showing strong leadership and communication skills. Continuous Improvement: Actively identify opportunities for process improvement and innovation. Senior-Level Responsibilities: Take on strategic responsibilities, including leading physical inventories with customers. Qualifications High school diploma or equivalent. Relevant certifications as required per level. Experience in quality assurance or material handling operations preferred. Strong attention to detail and commitment to safety and compliance. Ability to work efficiently in a fast-paced environment. Proficiency with RF/tablet technologies. Excellent communication and teamwork skills. Benefits Competitive salary. Health, dental, and vision insurance. Retirement savings plans + company match. Paid Time off. Opportunities for professional development and career advancement. Why Join DSI? At DSI, we believe our employees are our greatest asset. If you are passionate about safety and training, and ready to make a significant impact in a dynamic logistics environment, we invite you to apply and join our dedicated team

As a Quality Control Associate, you will play a critical role in ensuring that all products meet our company's high standards of quality. You will conduct inspections, perform tests, and collaborate closely with production and supply chain teams. A Bilingual associate fluent in English and Spanish is highly encouraged to apply to support communication with our partners and vendors. Key Responsibilities Perform routine product inspections and quality assurance checks Document and report quality issues clearly and accurately Communicate with Korean-speaking teams and vendors to resolve quality concerns Maintain compliance with company policies and regulatory standards Participate in continuous improvement initiatives Support audits and prepare quality reports as needed Identify, document, and report non-conformities or defects Operate and maintain inspection equipment and tools Work closely with production and engineering teams to resolve quality issues Record inspection results and maintain accurate documentation Follow standard operating procedures and safety guidelines Support continuous improvement and root cause analysis efforts Pay $18/Hr Requirements:Requirements Prefer Male applicants preferred for physical job requirements Basic mechanical knowledge or experience in a manufacturing or technical field Conversational proficiency in both English and Spanish Able to use basic Microsoft Office tools (Excel, PowerPoint) Must be physically fit and able to work on the production floor

Quality Inspector Status: Full Time, Non-Exempt Schedule: 40 Hr Seoyon E-Hwa is a leading automotive parts manufacturing company specializing in precision injection molding solutions. Dedicated to innovation and excellence, our primary focus involves offering Tier 1 manufacturing support to the automotive OEM's. As we expand our operations, we are seeking a talented Quality Inspector to join our dynamic team at the Client Site. Position Overview: We are seeking a meticulous and detail-oriented Quality Inspector to join our team at Seoyon E-HWA Manufacturing Savannah, a leading manufacturer of automotive interior parts. As a Quality Inspector, you will be responsible for ensuring that all products meet our high standards of quality, safety, and functionality. This role involves inspecting materials, in-process products, and finished goods, as well as collaborating with production teams to resolve quality issues and ensure continuous improvement. Candidates must be willing and able to perform duties at the client site as part of their responsibilities. Responsibilities Inspect automotive interior parts to ensure conformance to product specifications and quality standards. Perform both visual and dimensional inspections using tools such as calipers, micrometers, gauges, and other measuring instruments. Conduct functional testing to verify that parts meet performance requirements. Identify defects or deviations from product specifications and document findings accurately. Record inspection results, track non-conformities, and maintain detailed reports for compliance and traceability. Communicate quality issues to production staff and assist in root cause analysis and corrective actions. Ensure compliance with all relevant industry standards, customer specifications, and regulatory requirements. Assist in the development and implementation of inspection procedures and work instructions. Work closely with the production team to resolve quality concerns, improve processes, and maintain high levels of product consistency. Perform audits on raw materials and finished products to ensure consistency in quality across all production stages. Support internal and external audits as required. Participate in continuous improvement initiatives and suggest process enhancements to improve product quality. Qualifications High school diploma or equivalent; additional certification in Quality Control or Engineering is a plus. Previous experience in quality inspection, preferably in the automotive or manufacturing industry. Strong understanding of automotive interior parts and components. Proficiency with measuring instruments (calipers, micrometers, gauges, etc.). Familiarity with quality standards such as ISO 9001, TS16949, or similar. Excellent attention to detail and a keen eye for identifying defects or deviations. Strong communication skills and the ability to collaborate effectively with cross-functional teams. Ability to read and interpret technical drawings, specifications, and blueprints. Basic knowledge of statistical process control (SPC) and quality improvement techniques. Ability to work independently with minimal supervision while maintaining a team-oriented approach. Physical Requirements: Ability to stand for extended periods. Ability to lift and carry up to 25 lbs. Manual dexterity for using inspection tools and equipment. Benefits: At Seoyon E-Hwa, we believe that our success is driven by the well-being and satisfaction of our employees. We are committed to fostering a positive and inclusive workplace where every team member can thrive. Medical/Dental/Life Insurance 401k Paid Time Off Paid Holidays Seoyon Ehwa Manufacturing Savannah Inc is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Geotechnical team in Hilton Head, SC & Savannah, GA is looking for a CMT Technician to perform field observation, inspection, testing, and sampling of soil, aggregates, concrete, grout, masonry, and asphalt pavement. You'll document findings in line with engineering best practices and building codes-helping ensure quality and compliance from the ground up. Join our Geotechnical Services Group and play a key role in construction and site development projects across the region! Responsibilities Improvement/Innovation: Accept changes at work and provide support when asked. Health, Safety, and Environment: Follow a range of mandatory work instructions (including use of personal protection equipment where relevant) to safeguard the environment and the well-being of self and others. Performance Management: Complete allocated work to the required standards of quality and timeliness; use performance management systems to improve personal performance. What you will bring to the team: High school diploma or GED certificate Experience in field testing of soils, aggregate, concrete, asphalt, and masonry preferred but training will be provided on the job Certification in at least one of the following is preferred: ACI, NICET, ICC, SCDOT Good mechanical aptitude and troubleshooting abilities preferred Able and willing to travel and work outdoors at job sites #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.