Quality control inspector jobs in Spring Hill, TN - 60 jobs

Our client, a manufacturing company located in the Lebanon, TN area, is hiring a full-time Quality Engineer. Responsibilities include, but are not limited to: Support plant quality systems and customer quality requirements Lead root cause analysis and corrective actions for quality and production issues Develop and maintain PFMEA, Control Plans, and Work Instructions Monitor KPIs, scrap, warranty data, etc..and drive continuous improvement Support internal and external audits Interface with customers and suppliers on quality issues Support APQP, PPAP, and new product launches Qualifications Bachelor's degree in Engineering or related field 2+ years of quality engineering experience within a manufacturing environment. Experience with problem-solving tools and data analysis. Our Client Offers: Annual base salary Health, dental, and vision insurance, 401(k) with company match, paid time off and holidays, and more. Opportunities for professional growth and advancement Pay Details: $60,000.00 to $80,000.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Quality Assurance Technician Contract: Direct hire, permanent Schedule: Monday to Friday, 6:00 AM - 4:30 PM or 4:00pm - 2:30 AM Pay Range: $19-$22/hour (open to discuss based on experience) Role Summary The Quality Assurance (QA) Technician has the primary responsibility for protecting the food by conducting food safety and quality sampling, testing, and documentation to meet all regulatory, customer, and food requirements. The QA Technician is responsible for conducting food safety and quality assurance procedures to ensure compliance with best practices for food safety and quality. The QA Technician reports to the QA Manager. Key Responsibilities Ability to develop, write, and maintain plant SOP program. Responsible for meeting all applicable food and supplement regulations (international, national, state, and local). Responsible for sampling, testing, and documentation of the procedures, records, Good Manufacturing Practices (GMPs), and Hazard Analysis and Critical Control Points (HACCP). Works to maintain the safety, legality, and quality of each food and the processes used in their manufacture. Responsible for meeting and exceeding customer requirements. Works to reduce customer/consumer complaints for supplements manufactured on site. Reports safety and quality issues to plant leadership. Authorized to hold products based on food safety or quality non-conformance. Participates in daily food evaluation to identify possible defects. Participates in physical inspections on a weekly basis in each area (pest control, operational methods, maintenance for food safety, sanitation, personnel practices, etc.). Selects food items for analysis at specific stages in the production process for evaluating compliance to specification. Able to use the following instrumentation/measuring devices: Thermometers, Metal detectors, X-ray devices, Calculators, Scales, Gauges, Calipers, Rulers, Moisture analyzers, Ovens. Responsible for assuring materials are received from approved suppliers and conducts raw material supplier performance monitoring. Participates in the Environmental Monitoring Programs (i.e., collecting swab samples, using the ATP system). Able to print finished supplement case labels. Ensures appropriate communication of food safety/QA issues with Production. Other duties may be assigned, and QA Technician is expected to effectively manage and execute changes. Qualifications Effective work ethic and good communications skills. Required: College coursework and experience in the food industry. Training in HACCP (Hazard Analysis & Critical Control Points). Training in a Global Food Safety Initiative (GFSI) standard such as BRC or SQF. Good writing, mathematics, and critical thinking skills. Experience in computers including spreadsheets. Continuous improvement experience. cGMP Process development and compliance enforcement. Regularly required to climb, stand, or walk for extended periods of time. Use a computer keyboard and monitor more than 25% of total work time. The employee must occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee frequently works near moving mechanical parts and is occasionally exposed to outside weather conditions, wet and/or humid conditions, fumes, or airborne particles, and extreme heat/cold. The noise level in the work environment is often moderate to loud. Ability to work different shifts and weekends. Ability to lift up to 50 lbs. Ability to stand for extended periods of time, physical stamina. Ability to work in various temperatures. Must be able to wear any required PPE such as scrubs, hair net, lab coat, and facemask. Ability to adjust work schedule as business needs require.

Job DescriptionSalary: $24.70 Starts at $24.70 an hour // $700 sign-on bonus // paid time off // 401(k) // health benefits Be part of a team thats transforming work into something amazing. At Tennessee Cheesecake, were on a mission to create delicious dessertsand a better way to work. Were building a lean culture that values people, learning, and daily improvement. If youre passionate about food safety, leadership, and continuous improvement, we want you on our team. Position Summary The QA Tech is a proactive, improvement-driven champion that thrives in a hands-on environment. In this role, youll support and enhance our SQF and HACCP systems, while leading daily improvements rooted in Lean thinking. Youll foster a culture of ownership, continuous learning, and high standards across the production floor. What Youll Do As Quality Assurance Technician, youll work closely with Production, Sanitation, and Maintenance to meet the highest food safety standards. Your #1 duty will be making improvements to processes, maintaining quality and food safety. Your next most important duty will be coaching and training others on making improvements. Other Responsibilities: Ensuring compliance with HACCP, regulatory and customer-specific standards Facilitating root cause analysis and corrective actions Maintain compliance with FDA, SQF, HACCP, and GMP standards Supporting mock recalls, customer complaint resolution, and traceability exercises Training team members on standard work, quality procedures, and safety protocols What Were Looking For We are seeking a hands-on, solutions-oriented team member who embraces challenges as opportunities. The ideal candidate is both a coach and a lifelong learner, bringing the following qualities: A mindset of extreme ownership, follow-through and a commitment to continuous growth Knowledge of food safety systems (SQF, FSMA, GMPs, HACCP) Proven analytical, problem-solving, and conflict resolution abilities Strong communication, organization, and interpersonal skills Tech-savvy and adaptable to changing priorities Education & Experience Requirements Bachelors in Food Science, Microbiology, or related field preferred; Associates degree in a science related field with 2+ years of quality assurance experience in food manufacturing may be considered Must be proficient with computer-based tools Schedule Primarily 6 AM 4 PM, MondayFriday; flexibility weekends as needed Physical Requirements Comfortable working in a production environment Must follow food safety requirements, which includes not wearing jewelry (e.g., rings, watches, exposed dermal piercings), false eyelashes, fingernail polish, and artificial nails Physically able to stand, bend, lift (up to 30 lbs occasionally), reach, and perform full-body movements Compensation & Benefits $24.70 per hour to start $700 sign-on bonus after 90 days with excellent attendance Employee Profit Share Program 401(k) with company match Paid Time Off program Medical, Dental, Vision Insurance (full-time benefit after waiting period) Company-paid Life Insurance (full-time benefit after waiting period) Most major holidays off (Thanksgiving, Christmas, etc.) Our Culture & Values We believe work should be more than a paycheckit should be a place where great people do great work. Our core values guide everything we do: See the glass as half full Have heart (no jerks) Dedication to the team Customer first Be adaptable Have fun At Tennessee Cheesecake, every shift is a chance to make things cleaner, safer, and smarter. We challenge each other to learn, improve, and growtogether. Ready to grow with us? Apply today and be part of something sweet. Tennessee Cheesecake is an equal opportunity employer.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Performs visual, mechanical, functional, dimensional or electrical inspection of a variety of raw materials and products in the production assembly process through to final system assembly. Performs inspection tasks involving the use of a wide variety of test instruments and equipment to measure values and record functional operation of components, equipment, systems, supplies and materials. Determines acceptability and identifies and recommends disposition of defective items in accordance with established procedures. **Key functions of Job for Quality Inspector:** + Works under close supervision and direction of the inspection supervisor or his/her delegate to ensure acceptance on complex mechanical and microelectronic assemblies and associated paperwork. + Inspector will be performing inspection with microscope on small delicate microelectronic components, semiconductor packages and working in a clean room production environment. + Visually inspects electronic assemblies for proper method of assembly, component types, component orientation, mechanical and electrical connections, soldering workmanship, foreign material, finish and appearance, marking and other characteristics that could affect the quality and/or reliability of the product. + Inputting defect data into database and performing first article inspection on assemblies. + Assists in-process monitoring of material handling, shipping, and packaging of product. + Inspects material identifying paperwork for accuracy and proper handling as per defined procedures. + Occasionally assists in carrying out investigations to solve problems encountered in the course of inspection of product and documentation. + Interact and communicate with customer inspector during source inspection visit. + Candidate must be able to obtain a security clearance. **Skills and Specifications:** + Good oral and written skills + Ability to work in a team environment + Attention to detail & manual dexterity + Ability to read and understand blueprints and schematics + Proficient in Microsoft Office + Ability to learn other software as required **Education and Qualifications:** + High school diploma required + Certification to IPC-A-610 preferred + Familiarization with Inspection Criteria I.A.W. MIL-STD-883; Test Methods 2017 preferred **Work Environment:** Combination of manufacturing and office environment. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans * Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. * Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan * Eligibility begins the first day of the month following your hire date. * The Company offers a matching contribution up to 6% of your eligible compensation. * Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave * Accrual of up to 56 hours of paid sick leave per year. * Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours * Eligible to receive vacation hours on January 1st following your hire date. * These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges * NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence * Eligible for various types of leave, including: * Medical Leave * Non-Medical Family Care Leave * Maternity and Paternity Leave * Personal Leave * Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details * Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. * Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. * Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. * Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. * Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities * Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. * Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. * Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. * Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. * Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. * Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. * Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. * Provide constructive feedback to improve efficiency, productivity, quality, and safety. * Assist Crew Chiefs and Supervisors in determining the scope of required repairs. * Perform weight and balance procedures. * Release aircraft or components back into service following approved inspections. * Participate in special projects or other duties as assigned by leadership.

Discover your potential at BEL Environmental Engineering, LLC! We are experts in the Solid Waste industry and work as a team to solve complex challenges and provide our clients with a full spectrum of talent and experience. A career at BEL is different. We are a small and employee focused firm that provides opportunities for your career to grow along with us. In this role, you will be challenged and encouraged to turn big ideas into solid results and take ownership of your contributions. We are currently seeking a Construction Quality Assurance Technician (CQA) to join our team of dedicated and passionate professionals. **Signing Bonus** RESPONSIBILITIES: Perform construction quality control inspections at various environmental construction projects Perform routine environmental testing and data analysis Observe and thoroughly document construction procedures Communicate daily with the Client and the Project Manager Work under a Project Manager to assist in various Construction Quality Assurance projects. Assist Project Managers with certification reports 90% Field Work, 10% office, extended travel required

The Lasko Quality Inspector is responsible for ensuring that box fan products and related components meet defined quality, safety, and regulatory requirements. This role performs inspections, measurements, and documentation across metal pressing, metal painting, injection molding, and final assembly processes. This is a hands-on plant floor position located in Franklin, TN. Essential Functions In-Process Inspections Conduct inspections during: Metal Pressing: Dimensional accuracy, burrs, deformation Metal Painting: Coating thickness, adhesion, coverage, cosmetic defects Injection Molding: Part dimensions, flash, short shots, sink marks, color Assembly: Fit, function, labeling, wiring, and safety features Perform final product inspections of box fans for appearance, functionality, and safety. Measurement and Testing Use appropriate measuring and test equipment, including calipers, micrometers, gauges, coating thickness meters, and visual inspection tools. Verify products against engineering drawings, specifications, control plans, and work instructions. Conduct basic functional and safety checks (e.g., rotation, noise, guards, labeling). Documentation and Reporting Accurately record inspection results in logs, check sheets, or electronic systems. Identify, segregate, and clearly label nonconforming material. Communicate defects and trends to production, quality, or supervision. Support containment, re-inspection, and verification of corrective actions. Quality System Support Follow established quality procedures and work instructions. Support internal audits, customer audits, and regulatory inspections as required. Assist with continuous improvement by identifying recurring defects and process issues. Maintain cleanliness and proper calibration status of inspection tools. Competencies and Abilities Ability to read and interpret: Engineering drawings and specifications Inspection criteria and control plans Basic understanding of manufacturing processes preferred: Metal pressing and forming Paint/coating processes Injection molding Mechanical and electrical assembly Proficient with basic measurement tools. Strong attention to detail with the ability to identify cosmetic and functional defects. Basic computer skills for data entry and reporting. Certifications and Special Requirements Familiarity with ISO 9001 or similar quality management systems. Knowledge of common quality tools (check sheets, defect tracking, basic root cause analysis). Education and Experience High school diploma or equivalent required. 1-3 years of experience in a manufacturing quality or inspection role preferred. Experience in metal fabrication, painting/coating, injection molding, or assembly environments is a plus. Physical Demands The physical demands described are representative of those required to successfully perform the essential functions of this job. Employees are regularly required to talk or hear and frequently required to stand, walk, use hands to handle or feel, and reach with hands and arms. Work Environment Work is performed in both an office setting and a manufacturing environment that may be exposed to dust, odors, and noise. Benefits We offer a competitive starting wage plus a comprehensive benefits package, including: 401(k) retirement savings plan Comprehensive health insurance Dental and vision plans Company-paid life insurance Telemedicine program Voluntary additional life insurance Tuition reimbursement About Lasko Products Better Air Starts Here. Lasko Products is the leading air solutions brand with a reputation for reliable products, peak performance, and perpetual innovation - our commitment to our customers for over a century. Founded in 1906 by Henry Lasko in Philadelphia, Lasko has evolved for over a century to become the global leader in air solution products. From our roots in small appliances, fans, and portable heaters, we've grown to become the leading home comfort company while maintaining our unwavering commitment to quality and value. Today, Lasko stands as a symbol of innovation, offering consumers around the world high-performance products; portable fans, heaters, air purifiers, humidifiers, and home ventilation solutions. Our well-known brands, such as B-Air, Air King, and Guardian Technologies, serve both consumer and commercial markets across North America and internationally. As an American company, we take pride in upholding the spirit of hard work, trust and accessibility, ensuring that Lasko remains available to all, for generations to come. Headquartered in West Chester, Pennsylvania, with manufacturing and distribution facilities nationwide, Lasko continues to set the standard in the air solutions category for another 100 years. Lasko's mission is to enhance lives by creating comfortable environments with innovative products you can trust. The company's success is based on Five Core Values: Be Bold Challenge the status quo Courageously pursue the impossible Reject mediocrity Be Together Work together for success Drive trust and candor with each other Prioritize "We" before "I" Be A Leader Lead with personal conviction Inspire each other to deliver high- quality results Leverage resilience and agility to drive excellence Be Accountable Consistently deliver to our customers Embrace commitments as a contract Take pride in our actions Be The Change Demonstrate a passion to win Make a difference at work in our communities Step forward and take initiative Why Join Lasko? At Lasko, we believe people do their best work when they're supported ---- personally and professionally. That's why we offer flexible hours and a hybrid work schedule for our corporate team, promoting employees to balance life and work in a way that fits their lifestyle. Our dog-friendly corporate headquarters adds a fun, welcoming atmosphere, while our competitive salaries with bonus potential recognize and reward your contributions. We also offer a comprehensive benefits package that includes a strong 401(k) match, wellness incentives, and robust health coverage. Join Lasko and be part of a legacy of innovation - at a company that values flexibility, growth, and a culture where you can thrive.

Luttrell Staffing Group is hiring for Quality Assurance | Lab Tech in Lebanon, TN - Apply Today! *** GREAT PAY, WEEKLY PAYCHECK, NO WEEKENDS *** Your benefits as Quality Assurance | Lab Tech:· Pay: $18 per hour· 8 to 10-Hour Shifts· Monday-Friday (OFF Saturday-Sunday)· Zero Fees - you'll never be charged for any screening service Responsibilities of Quality Assurance | Lab Tech:· Perform and document all quality assurance functions accurately and efficiently· Conduct product and quality testing, including basic chemistry tests· Support raw material inspections and inbound quality checks· Collaborate on HACCP reviews and report SOP updates to the Director of Quality Assurance· Collect and trend data for quality assurance programs· Conduct routine facility walkthroughs to ensure food safety compliance and submit corrective actions as required· Assist with production floor operations and internal or regulatory audits· Follow lab manuals, policies, and safety procedures· Complete other related duties as assigned Qualifications and Desired Skills for Quality Assurance | Lab Tech:· High School Diploma / GED - RESUME REQUIRED· Knowledge of Microsoft Office Programs (i.e. Word, Excel, and Outlook)· Ability to read and understand testing procedures· Excellent communication skills (i.e. oral and written)· Strong math skills· Lift 50 pounds· Drug screen, background check Apply today with Lebanon Branch! Call or Text 615-784-4670Luttrell Staffing Group is an EOE employer.

Temp Immediate opening for Quality Inspectors in the Pulaski, TN area. All candidates must be able to pass a pre-employment drug screen and criminal background check. * Automotive Manufacturing and/or Quality Control Experience a plus * Familiar with containment - inspection, sort and rework of components * Long term contract assignment * Fluent in spoken and written English * High school diploma or GED preferred * Must be 19 years of age or older * Must be a team player, take directions and have a sense of urgency * Mature, professional attitude, reliable transportation and professional appearance required 181 Bennett Drive, Pulaski, TN 38478, United States of America

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations Collect accurate inspection data and be able to report these findings to operational personnel Maintain a safety and customer service mindset at all times Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule Manage QC audit routes and complete requirements by their scheduled completion Identify, correct, and document discrepancies Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues Document and report non-conformances and identify equipment trends Serve as a back-up for other QC Techs Maintain a safe and clean work environment Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action Develop proficiency to train and coach others May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: High School degree or equivalent Fluency in English (written and spoken) required High speed manufacturing machine experience preferred Electrical, Mechanical, or QC/QA background preferred Must demonstrate excellent customer service Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail Ability to identify best practices and bring innovation to the work environment Must be able to learn basic electrical and mechanical concepts Must be able to work overtime, weekends, and holidays as assigned Core Competencies: Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands of the Position: Works in close proximity to manufacturing equipment Walks 2 - 4 miles in an 8 hour shift Stands greater than four hours at a time Stoops and bends below knee level 8 - 10 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands Grips with hands

Description: The Quality Technician is responsible for supporting the various departments in assuring that the requirements of the customer(s) and quality management system are being met throughout each department. The QT contributes to the continuous improvement and quality efforts of Mi Metals. Quality Technician: 1st Shift (start time and end time may vary slightly depending on audit and investigation needs). Position reports to Continuous Improvement and Quality Manager. Job Description Details: Trains motivates team members to achieve desired awareness of quality management system and procedures, work instructions, processes and help ensure employees adherence to those standards. Prepare test samples for Tensile testing. Perform tensile test and document results per customer requirements. Perform and/or Review First Article Inspections (FAI's) using hand tools such as calipers, micrometers, and optical comparators. Perform dimensional inspection layouts using Keyence vision system. Dock Audits to be performed daily. Coordinates and performs quality audits and reports findings to the appropriate personnel. Identify areas for improvement in quality control processes. Ensuring test equipment and tools are calibrated and working correctly. Assists with investigations for root causes and corrective actions. Maintains all internal calibrations. Perform process audits on a regular basis per deployed schedule. Report non-conformance issues to proper personnel; communicate with various personnel issues relating to quality. Support quality projects as needed or required. Attend meetings as required. Maintain a clean and safe environment. Perform other duties as required or assigned. Requirements: Required Qualifications: Knowledge, Skills, and Abilities Knowledge of computer programs including Microsoft Word, Excel, Outlook, PowerPoint, One Note, Teams, and other software programs such as ERP systems. Excellent verbal and written communication skills with all levels of the organization and ability to train. Must be competent in the use of measuring instruments such as (calipers, micrometers, tape measure, webster). Knowledge of or the ability to learn testing and measuring equipment (Instron (tensile testing) and Keyence (measurements)). Ability to accurately read, interpret and explain blueprints, engineering drawings, specifications and standards. Education, Certification/License & Work Experience: High School Diploma or equivalent 2 -4 years of related experience preferred. ASQ Certificates Desired: CQT (Quality Technician) CQA (Quality Auditor) Note: Certifications are not a requirement. Dependable to adhere to schedule with prompt punctuality and excellent attendance.

The Sub Fabrication Quality Assurance Inspector is responsible for overseeing sub-fabricators quality programs to assure best quality product will be fabricated to the job specifications and Cooper Steel's standards. PRIMARY DUTIES AND RESPONSIBILITIES Promote a strong quality culture throughout the company maintaining Cooper Steel's core priorities: Safety, Quality, Production. Collaborate with sub-fabricators to prevent and resolve quality issues and promote continuous improvement. Visit sub-fabrication shops to monitor and verify adherence to AISC and/or company quality standards. Audit sub-fabricators' quality documentation, including inspection reports, NDT records, welder qualifications, and MTRs, with stricter processes for non-AISC-certified companies. Confirm that sub-fabricators maintain accurate material traceability and current certifications. Identify nonconformances, document findings, and assist with corrective actions. Maintain records on sub-fabricators in accordance with company procedures. Review the company's Approved Sub-Fabricator List based on performance and compliance, including NCR tracking. Communicate inspection results and concerns to the QA Manager and project teams promptly and professionally. Work with minimal supervision to complete tasks assigned. Provide evaluations and recommendations on performance of systems and operations. Stay current with relevant AISC, AWS, and ASTM standards. Other duties as assigned. SUPERVISORY RESPONSIBILITIES No supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE 3-5 years of experience in quality or fabrication in the structural steel industry. Working knowledge of AISC 207, AISC 360, AISC 303 and AWS D1.1. Familiarity with NDT methods, welding processes, and fabrication documentation. Ability to read and interpret shop drawings, weld symbols, and specifications. Valid driver's license and ability to travel regularly to sub-fabricator locations. Certified Welding Inspector (CWI) or equivalent certification (preferred). Experience with AISC certification programs and audits (preferred). OTHER SKILLS Strong functional and technical skills; ability to communicate effectively with a diverse range of individuals; good judgment; strong attention to detail and organizational skills; ability to work effectively with others; computer literate; highly developed organizational, planning and oral and written communication skills. While performing certain duties of the job, the employee is required to stand, stoop, bend, twist, lift, pull, and reach. Use of hands for gripping and grasping required. Specific vision abilities are required. Lifting is required up to 75 lbs. Must be flexible in hours worked and willing to work overtime. WORK ENVIRONMENT Position is primarily in a typical office setting that involves everyday risks or discomforts that require normal safety precautions. The position performs work occasionally in a Shop setting which includes a variety of working conditions. These include the following conditions: noise level fluctuations from moderate to high, use of personal protective equipment, machine/equipment use. Position involves everyday risks or exposure to elements that require safety precautions.

Auditor is responsible for verifying all of our products - stampings, welding and assembly to the customer's specifications. He/she is also responsible for all quality inspection per the customer requirements and must maintain audits to ensure compliance to all regulations. Essential Duties and Responsibilities: Perform 1st pieces buy off Measure parts on gauges Perform audits at all layers of operation Perform gage R&R Support the production and quality departments in problem solving Responsible for quality assurance holding cage -Crib-, which has new parts, changed parts, and prototype parts Execute all job responsibilities, not specifically listed here, that may be determined necessary by the Quality Manager Demonstrates through personal action, a strong commitment to disciplined adherence to process and procedures Actively contributes to and participates in continuous improvement initiatives

Full-time Description The Quality Technician is responsible for supporting the various departments in assuring that the requirements of the customer(s) and quality management system are being met throughout each department. The QT contributes to the continuous improvement and quality efforts of Mi Metals. Quality Technician: 1st Shift (start time and end time may vary slightly depending on audit and investigation needs). Position reports to Continuous Improvement and Quality Manager. Job Description Details: Trains motivates team members to achieve desired awareness of quality management system and procedures, work instructions, processes and help ensure employees adherence to those standards. Prepare test samples for Tensile testing. Perform tensile test and document results per customer requirements. Perform and/or Review First Article Inspections (FAI's) using hand tools such as calipers, micrometers, and optical comparators. Perform dimensional inspection layouts using Keyence vision system. Dock Audits to be performed daily. Coordinates and performs quality audits and reports findings to the appropriate personnel. Identify areas for improvement in quality control processes. Ensuring test equipment and tools are calibrated and working correctly. Assists with investigations for root causes and corrective actions. Maintains all internal calibrations. Perform process audits on a regular basis per deployed schedule. Report non-conformance issues to proper personnel; communicate with various personnel issues relating to quality. Support quality projects as needed or required. Attend meetings as required. Maintain a clean and safe environment. Perform other duties as required or assigned. Requirements Required Qualifications: Knowledge, Skills, and Abilities Knowledge of computer programs including Microsoft Word, Excel, Outlook, PowerPoint, One Note, Teams, and other software programs such as ERP systems. Excellent verbal and written communication skills with all levels of the organization and ability to train. Must be competent in the use of measuring instruments such as (calipers, micrometers, tape measure, webster). Knowledge of or the ability to learn testing and measuring equipment (Instron (tensile testing) and Keyence (measurements)). Ability to accurately read, interpret and explain blueprints, engineering drawings, specifications and standards. Education, Certification/License & Work Experience: High School Diploma or equivalent 2 -4 years of related experience preferred. ASQ Certificates Desired: CQT (Quality Technician) CQA (Quality Auditor) Note: Certifications are not a requirement. Dependable to adhere to schedule with prompt punctuality and excellent attendance.

Job Description Construction Materials Testing Technician III Cornerstone Engineering, Inc. Nashville TN At Cornerstone Geotech Services, we specialize in providing exceptional geotechnical engineering services tailored to meet our customers unique project needs. With our extensive expertise in the field, we bring a wealth of knowledge and a commitment to excellence to every project we undertake. Our team of skilled professionals excels in performing comprehensive field and laboratory testing, observation, and inspection of various construction materials, including soils, aggregates, concrete, asphalt, and steel. We understand the critical role that accurate data plays in the success of our clients' projects, which is why we meticulously communicate with project stakeholders, including project managers, engineering technicians, client representatives, and contractors' representatives, to ensure a thorough understanding of project requirements and to deliver precise testing, observation, and inspection results. Position Overview: As a Construction Materials Testing Technician III (CMT III), you will conduct construction material testing, communicate results, and ensure adherence to safety standards, while also assisting with scheduling and receiving training for increased responsibilities in construction operations. Roles and Responsibilities: · Conduct field and laboratory testing of construction materials (e.g., soils, concrete, asphalt). · Communicate project requirements and results to stakeholders. · Transport material samples and documentation for further analysis. · Prepare and submit written and digital reports to the Project Manager. · Assist with scheduling and dispatch. · Perform basic testing and observation duties under supervision. · Obtain ACI certification for reinforcing steel and conduct · Conduct soil compaction tests using nuclear density gauges. · Perform Masonry inspections and conduct grout/mortar testing · Ensure construction aligns with design drawings. · Discuss data accuracy with Project Manager. · Submit documentation and communicate results as directed. · Receive progressive training and increased responsibilities. · Maintain flexibility for early construction start times. · Adhere to safety rules and practices. · Maintain quality standards and equipment · Conduct Post tension inspections before and after concrete placement Job Requirements: · High School Diploma · Valid Driver's License · Minimum 5 years in the field · Ability to work outside in different weather environments · ACI Technician Level 1 · OSHA 10 · CWI, ICC, PTI, + NICET would be a bonus! · Willing to work flexible hours, outside of the standard 8am-5pm Rewards & Benefits: · Competitive salary based on experience and education. · Medical insurance for the employee (portion of premium cost paid by employer). · Vision insurance for the employee (100% of premium cost paid by employer). · Dental insurance for the employee (100% of premium cost paid by employer). · Spouse & children's insurance can be obtained at competitive group rates. · Paid time off bank. · Focus on work-life balance. · 401k: Safe-Harbor match contribution of 3% of employees' salary. Corporate Culture: At Cornerstone, we believe in a collaborative approach that is founded on the principles of Commitment, Excellence, and Integrity to our clients and our team members: Commitment to Staff and Clients Treat others with respect. Set and work toward common goals. Communicate clearly and effectively to avoid misunderstandings. Excellence in Performance and Production Provide value-added benefits. Exceed client expectations. Deliver services and products on time and budget. Integrity in Behavior Deal with clients and associates fairly. Practice honesty in all endeavors. Focus on a servant attitude. The successful candidate will become an integral member of a team focused on living these principles daily. We look forward to welcoming the right member to our growing team!

Job Description Propper International is the leading manufacturer of high-quality tactical gear and apparel for Military, Law Enforcement, Fire, EMS, Security and Corrections since 1967. For the past 55 years, we've supplied over 120 million garments to the U.S. Department of Defense - more than any other manufacturer - and have built a commercial brand of product for law enforcement agencies and the greater public safety community. Our Dickson, Tennessee Distribution Center is looking for a motivated, detailed oriented Quality Control Inspector to preserve the integrity of our products and keep the Propper Brand associated with quality and consistency. This position is scheduled Monday through Friday, 8am to 4:30pm. JOB FUNCTION: Check the quality of incoming and outgoing products, as well as ensure that the merchandise is within the company's specifications and standards. This job involves tasks such as performing inspections of clothing and footwear, running quality tests, and keeping records of defects. RESPONSIBILITIES / DUTIES: Follow audit procedures for incoming audits and outgoing audits. Record and report all findings. Ability to complete related forms legibly. Ability to understand and interpret basic arithmetic. Reject items that does not meet company standards. Re-audit lots if necessary Ability to lift up to 50 lbs Any other assigned tasks. EDUCATION / KNOWLEDGE / EXPERIENCE: High School Diploma or GED, required. Experience with Microsoft office required. 2 years college or experience preferred. Background in textile quality control preferred (Willing to train) Color distinction and color validation experience a plus. (Willing to train) Experience using a standard tape measure. Self-motivated Team player Self-starter Propper is an Equal Opportunity Employer

Full-time Description Title: Quality Technician Reports to: Quality Manager Responsibilities: Assist with relieving operators for breaks and lunches as needed Training new operators to the OPC and C&S procedures as required including new hire orientation Work in accordance with the quality policy and quality objectives Inspect per standards at all stages of manufacturing and document as required Identify and document any product not conforming with the use of a NCR Active team member in problem solving and continuous improvement activities Use of inspection equipment as required Assist with internal auditing and maintaining the Quality Management System as needed Assist with monitoring calibration status of quality tools and / or equipment Print production, WIP, and misc labels as needed on the floor Communicate quality issues via shift meetings, NCR, RMAs, etc. Input of production reports as required Conduct sorts at the customer as required Provide a positive attitude and atmosphere within the company and while representing C&S at the customer Assist in monitoring scrap levels in your designated area and communicate as required Maintain housekeeping throughout the area of responsibility in the plant Understand the quality system as it relates to your function in ISO/IATF 16949 Must work to all safety policies and goals of the company Maintain and wear PPE (Personal Protective Equipment) as required Assist with inventory when applicable Miscellaneous: Perform all other duties as the company may require Requirements Qualifications: High school diploma or G.E.D. (ability to read and minimal mathematics) Basic computer skills Ability to communicate and work well with others and maintain a positive attitude Must have a valid driver's license Must have your own mode of transportation Must be willing to travel on limited notice Knowledge of the manufacturing, injection molding, or previous quality experience Corrective action and / or problem solving experience (preferred) Knowledge of SPC, calibration, measuring equipment or devices(preferred) Required to take a written test and a hue color test (scores do count towards position awarded) A stable work history Must have flexible hours and be able to work in a fast pace environment Ability to work independently with limited supervision Ability to lift up to 40 LBS Must know how to read receiving labels and know how to verify them Must be able to work multiple shifts and overtime as needed to meet internal and customer requirements Attendance must be in good standing Must complete a new employee orientation (if applicable)

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations Collect accurate inspection data and be able to report these findings to operational personnel Maintain a safety and customer service mindset at all times Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule Manage QC audit routes and complete requirements by their scheduled completion Identify, correct, and document discrepancies Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues Document and report non-conformances and identify equipment trends Serve as a back-up for other QC Techs Maintain a safe and clean work environment Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action Develop proficiency to train and coach others May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: High School degree or equivalent Fluency in English (written and spoken) required High speed manufacturing machine experience preferred Electrical, Mechanical, or QC/QA background preferred Must demonstrate excellent customer service Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail Ability to identify best practices and bring innovation to the work environment Must be able to learn basic electrical and mechanical concepts Must be able to work overtime, weekends, and holidays as assigned Core Competencies: Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands of the Position: Works in close proximity to manufacturing equipment Walks 2 - 4 miles in an 8 hour shift Stands greater than four hours at a time Stoops and bends below knee level 8 - 10 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands Grips with hands

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan Eligibility begins the first day of the month following your hire date. The Company offers a matching contribution up to 6% of your eligible compensation. Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave Accrual of up to 56 hours of paid sick leave per year. Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours Eligible to receive vacation hours on January 1st following your hire date. These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence Eligible for various types of leave, including: Medical Leave Non-Medical Family Care Leave Maternity and Paternity Leave Personal Leave Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. Provide constructive feedback to improve efficiency, productivity, quality, and safety. Assist Crew Chiefs and Supervisors in determining the scope of required repairs. Perform weight and balance procedures. Release aircraft or components back into service following approved inspections. Participate in special projects or other duties as assigned by leadership. Qualifications Minimum 23 years of age. Valid driver's license with a good driving record. FAA Airframe and Powerplant (A&P) Certificate required. Part 65 Certification and minimum 2 years of aviation experience. 18-months minimum experience with Embraer Regional Jet 135/145 (ERJ) and/or Bombardier CRJ200 (CRJ) required. High school diploma or GED required; advanced training preferred. Must be legally authorized to work in the U.S. and able to travel internationally. Able to pass a 10-year work history review, criminal background check, and DOT pre-employment drug screening. Must submit to and pass FAA- and Company-mandated random drug and alcohol testing. Proficiency in English (reading, writing, speaking); Spanish proficiency is a plus. Must be familiar with FAR Part 135 and Part 145 operations, inspection methods, techniques, and tools. Must be proficient with inspection equipment and visual aids appropriate to the task. Completion of Quality Inspection training required. Knowledge, Skills & Abilities Strong knowledge of FAA regulations, maintenance procedures, and safety standards. Ability to work in a fast-paced environment with shifting priorities. Strong organizational skills with attention to detail. Excellent written and verbal communication skills delivered with professionalism. Ability to work independently and as part of a team. Strong interpersonal skills with the ability to interact with diverse personalities. Demonstrated ability to lead, mentor, and support others. Ability to manage multiple complex projects simultaneously. Self-motivated with a commitment to excellence and continuous improvement. Work Schedule & Environment Nightshift position: 4:00 PM - 2:30 AM, including weekends and holidays. Must be able to work flexible hours as operational needs require. Work is performed in a hangar and ramp environment with exposure to noise, weather, and aircraft operations. Must be able to work in a safe, professional manner while adhering to all regulatory requirements, including OSHA, EPA, state, and federal guidelines. Disclaimer: The above statements are intended only to describe the general nature and level of work required of the referenced position; they are not intended to be an exhaustive list of all responsibilities, duties, and skills required of individuals in the position. Please be advised that the duties and expectations of this position may be subject to change.