Quality control inspector jobs in Tomball, TX

Job Description : For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity after and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

Quality Control CMM Inspector (Night Shift) Shift: Night Shift (Monday - Thursday 4:30PM-3:00AM 10 hr. shift) As a Quality Inspector, you will play a crucial role in ensuring that our products meet or exceed customer specifications and quality standards. You will be responsible for inspecting machined parts, identifying defects, and verifying compliance with engineering drawings and the necessary part numbers and traceability numbers. Job Responsibilities: Perform in-process and final inspections on valve components, machined parts and detailed final assemblies. Perform receiving inspection on incoming product. Proficient in visual and dimensional inspections using all inspection tools for granite plate inspection. Interpret drawings, certifications, and industry specifications. The ability to apply GD&T. Trains and mentors less experienced inspectors. Create inspection reports and maintain accurate records of inspections and findings. Collaborate with production teams to address quality issues and provide feedback for process improvement. Performs other duties as assigned. Follow company instruction in record management including calibration, inspection, and test report. Able to lift to 50 pounds occasionally and be able to use forklift equipment Job requires walking through the campus 80% of time during shift, may be exposed to elements. May perform any other work-related functions as deemed necessary and appropriate by immediate supervisor or manager, as directed. . Skills & Abilities: Ability to interpret mechanical drawings of components and assemblies Knowledge of Geometric Dimensioning and Tolerancing (GDT) required Ability to read and interpret standards and specifications such as ASME, ANSI, NACE, etc. Proficient in MS Office Suite specifically MS Excel, and experience with ERP/MRP systems. Ability to work in a team-oriented environment that is fast paced and demanding. Must be self-directed, have excellent initiative and organizational skills. Exhibits a strong ability to handle multiple demands with a sense of urgency, drive, and energy. Works well meeting multiple deadlines with the ability to deliver on time. Excellent written and verbal communications skills. Core Qualifications: High School diploma or equivalent required. Minimum of five years QC inspection experience of raw material, machined parts, coating, and review of inspection and testing documentations. Minimum of 3 years of experience working in a machining and assembly environment Candidate must have Portable CMM (Faro, Romer) and/or Stationary CMM experience preferred Experience with nonconforming material control and ability to follow company specific instructions and directions. Experience with equipment calibration program. Experience with the review and approval of Certified Material Test Reports with respect to internal and national material specifications/standards. Experience with evaluation for acceptance of inspection and testing reports including Certificate of Conformance, Coating, Welding, Hardness Test, Heat Treat, Liquid Penetrant, Magnetic Particle Testing, Ultrasonic Testing, and Radiographic Testing.

As a Quality Inspector, you'' be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Specialist, you will be responsible for: + Inspecting parts, assemblies and subassemblies to required drawings and prints. + Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. + Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. + Initiating corrective action requests when conditions adverse to quality are repetitive in nature. + Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems + Completing, inspecting and distributing all quality records and documents and performing specialized testing as required + Verifying tests as required on all components and completed assemblies. + 1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. + Candidate will start on day shift due to training then move to nights. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Ameritex Machine and Fabrication is a high mix low volume sheet metal and structural fabrication facility that uses a variety of equipment such as CNC Fiber Lasers, CNC punch presses, CNC press brakes, and tube lasers to support over 19 production and assembly lines. The company serves customers in energy, oil and gas, automotive, electric vehicle, and aerospace. We operate out of a state of the art 100,000 sqft facility in Conroe, Texas. Job Responsibilities \tAddresses daily quality concerns and questions \tTroubleshoots manufacturing problems and quality issues \tWork closely with operation teams to ensure process controls are in place and adequate to meet standard requirements \tEnsure any non-conforming product is properly identified, quarantined and communicated \tExamines material or product for surface defects such as crack, pits, and incomplete welds \tVerifies specified dimensions of product or material \tConduct incoming material inspection, in-process inspection, and final inspection to procedures, specifications, drawings, samples, or illustrations. \tMust be able to follow instructions and work independently \tCleaning, organizing, and setting up workstations \tKitting or grouping required parts per job requirements \tMust be able to easily multitask around the shop. Qualifications \tExperience in manufacturing quality environment \tTooling experience needed \tComputer capable \tAble to stand, walk, squat, move for 8+ each day At least 2 years of college education Work Schedule Though this professional needs to complete his/her work during the standard routine hours, he/she might need to be flexible at times and extend beyond the normal hours to do the work which needs to be completed on a priority basis. $18.00 - $28.00 Hourly

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce. Are you ready to move the world forward? Apply now. A Brief Summary of This Position: This position reports to the Quality Supervisor. The NDT Inspector - Intermediate will evaluate the assembly of fabricated materials by dimensional checks, visual inspection of welds and conduct nondestructive testing by ultrasonic, mag particle, and liquid penetrant processes with knowledge working under a fully certified Level II Inspector. Responsible for coordination of the Quality area to meet production goals. Completes daily paperwork. Demonstrates a commitment to quality, productivity, safety and environmental policies. Responsible for communication within the work group ensuring teamwork and a productive work environment. Working with the production supervisor to maintain workflow of the area and report issues to the supervisor. Evaluate examination results and determine if material meets contract specifications. Responsible for generating and maintaining NDT reports and records for company and contractors. * THIS POSITION REQUIRES THE CERTIFICATIONS AND EXPERIENCE LISTED BELOW FOR BOTH INTERNAL AND EXTERNAL CANDIDATES* Candidates with higher level NDT Experience and Certifications will be considered for the level of NDT Inspector for which they are currently qualified. Work Schedule: 3rd Shift (Nights) Sunday - Thursday 11PM-7AM Starting Hourly Pay Rate: Intermediate Level: $33.43 Senior Level: $36.66 Advanced Level (CWI Required): $38.86 Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions: * Responsible for testing and evaluation, with absolute integrity, of products to ensure conformance to company and customer specifications * Makes decision in the area of codes (includes AWS D1.1) and specifications. * Interprets reports for NDT and quality acceptance. * Actively mentors Entry level NDT Inspectors, which includes monitoring and documenting OJT progress * Has the authority to reject material, stop work in process etc. to minimize financial loss and risk of customer dissatisfaction. * Works under production conditions with accurate performance and completion of work within set time limits * Accountable and responsible for essential tools and equipment provided along with the maintenance of these tools, to include calibration * Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures * Maintain timely and consistent attendance * This position reports to the Quality Supervisor and has no direct reports Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): * A high awareness for safety at all times. * High School diploma and 5+ years of work/educational experience or Associates Degree with 2+ years' experience or Bachelor's Degree * 2 years' experience in fabricated steel environment * Ability to perform basic mathematic calculations, including conversion of fractions to decimals * Ability to use basic measuring tools, such as tape measure, calipers, fillet weld gauges, and levels (digital and conventional) to ensure dimensional accuracy. * Level II NDT certifications or be able to obtain Level II certification within agreed upon time by Valmont * Ability to operate NDT testing equipment. * Ability to work effectively with plant employees, supervisors, management and customers. * Ability to prioritize work in order to complete deadlines. Must also be able to work through problem with the minimum amount of assistance from the lead person or supervisor. * Ability to work timely and expeditiously to deliver an on-time result without errors. * A strong working knowledge of Microsoft Word, Excel, and Outlook Highly Qualified Candidates Will Also Possess These Qualifications: * 6 years' experience in fabricated steel environment * Associate Degree in NDT from an accredited school * SNT-TC-1A NDT Level II in UT, VT, MT, and PT * AWS CWI certification * Competence in basic quality assurance disciplines including the use of dimensional inspection and gauging equipment * AWS certification * Passion and integrity with the drive to excel and deliver exceptional result Working Environment and Physical Efforts: Work is typically performed in a manufacturing plant environment and the incumbent needs to be able to move about the office, shipping area and all areas of the plant which are producing product line for the company. There is a relatively constant exposure to somewhat disagreeable work conditions such as dust, dirt, heat, fumes, and cold as well as noise levels above 80 decibels. Work conditions vary throughout the week depending on the area of the plant assigned to work in. There will be visits to both indoor and outdoor locations during all seasons of the year. Many of the tasks are physical and the incumbent has to be able to lift up to 50 lbs. although the most frequent amount of weight lifted is 20 lbs. The employee is regularly required to reach with hands and arms. The incumbent is frequently required to stand, walk, sit, use hands to finger, handle, feel, as well as balance, stoop, kneel, crouch, talk, and hear. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and depth perception. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: * Healthcare (medical, prescription drugs, dental and vision) * 401k retirement plan with company match * Paid time off * Employer paid life insurance * Employer paid short-term and long-term disability including maternity leave * Work Life Support * Tuition Reimbursement up to $5,250 per year * Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Job DescriptionJob Title: QC Inspector Employment Type: Full-Time Shift: 2nd Shift, may require some flexibility and have the ability to work an occasional Saturday. Company Overview Ultra Corpotech Inc. is a leading manufacturing company that takes pride in producing high-quality products with precision and efficiency. We are committed to a culture of safety, innovation, and growth. Join our team and contribute to our ongoing success as we continue to deliver exceptional products to our clients. Position Overview The QC Inspector will be responsible for ensuring that products meet established quality standards before reaching our customers. This role involves inspecting products at various stages of production, identifying defects, and ensuring compliance with company specifications and regulatory requirements. The ideal candidate will have strong attention to detail, excellent problem-solving skills, and a commitment to maintaining high-quality standards. Key Responsibilities Perform inspections on raw materials, in-process items, and finished products to ensure they meet quality and safety standards Use measurement tools (e.g., calipers, micrometers, gauges) to verify product dimensions and specifications Conduct visual inspections to identify defects such as cracks, deformations, or surface imperfections Document and report inspection results, including any non-conformities, in accordance with company procedures Work closely with production teams to address quality issues and implement corrective actions Maintain accurate inspection records and prepare quality reports Ensure compliance with ISO or other quality standards applicable to the industry Support internal and external audits as needed Perform other duties as assigned by a supervisor, lead person or management Qualifications High school diploma or equivalent. Technical training or certification in quality control/inspection is a plus 3-5 years of experience in quality control or a similar role, preferably in a manufacturing or production environment Skills Proficient in using inspection tools and equipment (e.g., calipers, micrometers, gauges) Strong knowledge of quality control standards and techniques Ability to read and interpret technical drawings and specifications Excellent attention to detail and organizational skills Basic computer skills, including familiarity with MS Office and quality management software Benefits Competitive salary based on experience Health, dental, and vision insurance Paid time off and holidays Opportunities for career advancement and professional development Retirement plan options 401(k) Ultra Corpotech Inc. is an equal opportunity employer and encourages applications from all qualified individuals. We thank all applicants for their interest; however, only those selected for an interview will be contacted. Please note that all offers of employment are contingent upon successful completion of a background check and drug screening. Ultra Corpotech Inc. is committed to maintaining a safe and productive work environment and conducts pre-employment screenings to ensure our standards are met.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. 4 days on 4 days off (Rotational). 12-hour shifts

As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with global standards. As a Quality Inspector, you''be the focal point for all QA/QC assessment for our Flexible Pipe Systems business. Conducting qualitative risk assessments, root cause analysis and providing corrective actions. Supporting QMS system by creating, editing and reviewing documents to be aligned with Baker Hughes global standards. This is for a third shift position (9pm-5: 30am). Training will be on the first and second shifts until training is complete (training timeframe dependent on competencies) -(1st)5am-1: 30pm and (2nd)-1pm-9: 30pm. The plant runs 24/7 so they need coverage 7 days a weeks. The inspector will work a 8 hour shift for 4 to 6 days a week, as dictated by necessity of the plant. Must be available to work weekends, as necessary. Key responsibilities: •Inspecting parts, assemblies and subassemblies to required drawings and prints •Initiating non-conformance reports on all parts and assemblies that are not to drawing and print specifications. •Assuring that manufactured units meet quality control procedures, engineering specifications and customer requirements. •Initiating corrective action requests when conditions adverse to quality are repetitive in nature. •Partnering with manufacturing management and internal process teams to eliminate the causes of quality problems •Completing, inspecting and distributing all quality records and documents and performing specialized testing as required •Verifying tests as required on all components and completed assemblies. •1 x 12 hour shifts this year to provide 24/7 coverage from Monday to Sunday. •Candidate will start on day shift due to training then move to nights. Skills & Competencies: •Be able to read and correctly interpret prints / drawings and specifications •Display understanding of defects, problem-solving skills or an enthusiasm to learn and develop your skill set in a hands-on environment •Have excellent communication skills and the ability to be a valuable team player Work Environment: •Fast paced and noisy environment with constant movement. •Regular lifting and/or moving up to to 50 lbs. Qualifications: •Have a High School Diploma or equivalent level of education •Demonstrate proven experience in a Quality Technician or Inspection role Shifts: •2nd shift: Monday -Friday from 3pm - 3am (12 hour shift for 4 to 6 days a week) •Must be able to work some weekends

Job DescriptionBenefits: 401(k) Dental insurance Health insurance Vision insurance The QC Inspector position is responsible for inspections against the internal quality system (QMS), customer requirements, and industry standards. The QC Inspector is also responsible for inspecting raw material, inspecting finished product, internal process audits, and ensuring general customer satisfaction. Responsibility Including but not limited to: Use of precision tooling and measuring devices such as calipers, micrometers, coating thickness gauge, rulers, tape measures, stamping dies, extensometers, and many more. Writing and filling out QC reports and digital data entry. Use of MS office and internal digital programs. Perform FAI reports and communicate efficiently on the results of FAI. Read and interpret engineered drawings. Use GD&T to perform product evaluations. Inspect to engineered drawings and determine if a product is within tolerance. Issue NCRs against any raw material, process, or finished good product thats not within the required specifications. Will need to read and understand industry standards such as ASTM, ANSI, API, and ISO. Ensure the achievement of quality objectives of the department. Ensure 5S activities and their guidelines are adhered to. Effectively communicate with peers, management, and customers. Others as directed by the QC Supervisor. Experience and requirements: Must have at least a High School Diploma. Must be willing to work in a fast-paced environment. Can work in a team and is a team player. Experience working in an industrial setting. Use of precision measuring devices. Willingness to learn. Is flexible and can work overtime. Must pass a drug test as part of the hiring process. An ideal candidate will also have: Experience with ISO 9001. Can read engineered drawings. Proficient with MS Office. Can read, understand, and interpret industry standards. Can write SOPs, JHAs, and procedures.

Job Description A Quality Control (QC) Inspector for threaded pipes is responsible for ensuring that the threads on pipes meet specific standards and tolerances. This role involves the utilization of precision gauges and instruments to measure machined threads and the outside diameter of pipes to determine thread height, taper, thread ovality, and other critical dimensions. KEY RESPONSIBILITIES: Setup all hand tools readily accessible to the job being performed Review work order packet for job to verify correct product is to be produced Assure Log Sheets are correct for the product to be produced Coordinate with the Gage Lab for proper gages to measure product Assure gages are mastered and set as required after production starts, as well as during production operation as required Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer Identify all rejected product on Digital Log Sheet and describe reason Identify all rejected physical product as per instructions and alert operator Assure all First and Last Article inspection is conducted as required Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection Assure that material for order is correct as described on the work order Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments Quality minded individual with a dedication to superior products Follow all applicable work instructions, specifications, and requirements Assist in training of inexperienced inspectors Follow all Company Rules, Procedures and Policies Follow all Company Safety Rules Any other duties as assigned by the Supervisor EXPERIENCE, SKILLS, AND KNOWLEDGE: 1 year experience as production operator/or previous experience as QC inspector in previous company Working knowledge of blueprint reading and basic math. Must be fluent in English, with the ability to read, write, and communicate effectively. Ability to understand and execute instructions well EDUCATION, TRAINING, AND CERTIFICATIONS: High School education or equivalent is preferred CRITICAL COMPETENCIES & CAPABILITIES: Teamwork Adaptability Accountability Reliability/dependability Initiative Safety awareness Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

Job Description Key Activities and Accountabilities Perform inspection (visual, dimensional, gauging and comparison as appropriate) on new manufactured, repaired and modified equipment and components pre, during and post qualification testing Raise Non-conformance Reports against non-conforming equipment / components and manufacturing, repair, modification quality records Work in accordance with Goods Inwards Quality Procedures Ensure inspection measuring equipment is kept safe, clean, fit for purpose and in current calibration Perform inspection surveys on returned operational equipment (Rosehill Resource and Customer owned) Perform Quality Control checks to Operations Support processes at key stages (i.e. prior to final shipment, job card completion etc.,) Perform Non Destructive Testing on components for certification purposes Witness pressure testing of equipment for certification to ensure that the tests are conducted to the required standards Job Knowledge and Qualifications Experience in a similar role - inspection of mechanical components & assemblies Trained and Experienced Internal Quality Auditor would be an advantage Good knowledge of workshop procedures and practices Knowledge of Risk Assessment/Job Card/Engineering Test Procedure compliance Able to display quality control/certification techniques Knowledge of MS Office (Excel, Word, Outlook & Teams) Ability to read and interpret drawings & technical documentation

PRE-DELIVERY INSPECTION TECHNICIAN-PORTER Chastang Ford is growing and we need more great people for our amazing team. We are getting vehicles daily and we need energetic, fast-paced people to do state inspections, vehicle check-ins, and accessory installations. We promote from within when we can and this position can be a stepping stone to other positions available in the dealership. Chastang Ford-"The Ford Truck Experts" THE COMPANY The Chastang Family has been involved in the automotive industry since 1933. Our focus is on providing a family atmosphere where our employees, customers, and community thrive. We aim to create a great place to work, learn and grow. * Advancement Opportunities * Transparency with employees and management * Freedom to make decisions * Providing work-life balance THE POSITION: We are to maintain the trust of our customers. We should make sure that their vehicle is ready for delivery. We are careful to maintain the integrity of that vehicle. * Inspect Vehicles off the transport * Report any damage or problems upon inspection of the vehicle * Install all accessories that have been assigned to that vehicle * Ensure vehicles are state-inspected and road ready * Bring vehicles from East Park to the dealership PHYSICAL DEMANDS: * Must be able to drive and operate a motor vehicle. * Must be able to hear and speak clearly to communicate with others. * Must be able to stand, kneel, or crouch for extended periods of time. * Must be able to regularly lift and exert up to 50 pounds of force in order to carry, push, pull, or otherwise move objects. * Must be able to climb into and out of medium-duty trucks * Must be able to perform job functions outside when it rains WORKING CONDITIONS: The successful candidate will be a highly motivated and organized individual. They will be able to work well in a family atmosphere and will take great pride in producing outstanding results and unparalleled quality with a sense of urgency THE LOCATION: Chastang Ford is located in Houston, TX approximately one-mile East of I-69 on the 610 North Loop East. WHY SHOULD YOU APPLY: * Very competitive pay plans * 401k plan with company matching * Dealer covered HAS-Health Saving Account * Dealer covered short-term and, life insurance * Paid Holidays and Birthdays Off * Medical, Dental, and Vision plans * Employee discounts on vehicles, parts, and service work * Training and advancement opportunity * Drug-free work environment

: For over 75 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Process Control & Safety Systems Control Valves & Regulators Isolation Valves & Actuation Oil & Gas Automation Reliability Solutions & Services Pressure Management Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities: Inspection & Testing Perform incoming inspections of pressure relief valves to assess condition and identify defects. Verify dimensional accuracy, material specifications, and component integrity before and after repair. Oversee hydrostatic, pneumatic, and functional testing to confirm valve performance. Ensure that all repaired Valves meet all necessary specifications, both physical asset and documentation prior to shipment of the valve to customer; i.e. Final Inspection Repair Oversight Monitor repair activities to ensure adherence to approved procedures and OEM specifications. Validate calibration of tools, gauges, and test benches used in valve repair. Ensure replacement parts meet quality and certification requirements. May communicate with customers directly to discuss specific issues found. Maintain the work area and equipment in a clean and orderly condition. Required to work independent of supervision for after-hours call-outs. Compliance & Documentation Maintain detailed inspection records, test reports, and repair certifications. Ensure compliance with ASME, API, ISO, and other applicable standards. Support audits by regulatory bodies and internal quality teams. Continuous Improvement Identify recurring defects and recommend corrective/preventive actions. Collaborate with technicians and engineers to improve repair processes. Provide training and guidance on quality standards and inspection techniques. Inspects valve and/or actuation assets against inspection forms. Ensures compliance to repair procedures and standards. Initiate non-conformances for assets that fail inspections against inspection forms. Monitor status of open non-conformances and work with Supervisors and Managers to ensure timely action. Escalate Quality Issues to relevant leadership as necessary. Suggest quality and process improvements to leadership. Drive implementation of processes as required. Monitor and report out established KPI's relevant at final inspection, like First Pass Yield % (FPY). QUALIFICATIONS: Education / Experience / Skills Technical diploma or degree in Mechanical Engineering or related field. Minimum 3-5 years of experience in valve inspection, repair, or industrial equipment quality assurance. Strong knowledge of pressure relief valve standards (ASME Section VIII, API 576, NBIC). Proficiency in using precision measuring instruments (micrometers, calipers, gauges). Ability to work non standard hours/after hours. Familiarity with non-destructive testing (NDT) methods is a plus. Strong organizational skills with exceptional attention to detail are required. COMPETENCIES: Ability to safely use and maintain a large variety of tools and equipment, associated with the assembly of relief valves, including impact wrenches, electric and manual hand tools, lapping machines, and overhead cranes and forklifts. Ability to read customer specification sheets and basic dimensional drawings. Ability to read and interpret assembly manuals (i.e. Manufacturers' Spring charts), engineering drawings and technical specifications. Good computer skills. Ability to work independently or as a team member. Ability to work with minimum supervision. Attention to detail and strong analytical skills. Excellent documentation and reporting skills. Strong communication and teamwork abilities. Commitment to safety and regulatory compliance.

2551 Valmont Dr Brenham Texas 77833-5418 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. **A Brief Summary of This Position:** This position reports to the Quality Supervisor. The NDT Inspector - Intermediate will evaluate the assembly of fabricated materials by dimensional checks, visual inspection of welds and conduct nondestructive testing by ultrasonic, mag particle, and liquid penetrant processes with knowledge working under a fully certified Level II Inspector. Responsible for coordination of the Quality area to meet production goals. Completes daily paperwork. Demonstrates a commitment to quality, productivity, safety and environmental policies. Responsible for communication within the work group ensuring teamwork and a productive work environment. Working with the production supervisor to maintain workflow of the area and report issues to the supervisor. Evaluate examination results and determine if material meets contract specifications. Responsible for generating and maintaining NDT reports and records for company and contractors. *****THIS POSITION REQUIRES THE CERTIFICATIONS AND EXPERIENCE LISTED BELOW FOR** **BOTH INTERNAL AND EXTERNAL CANDIDATES** ******* **Candidates with higher level NDT Experience and Certifications will be considered for the level of NDT Inspector for which they are currently qualified.** **Work Schedule: 3rd Shift (Nights)** **Sunday - Thursday 11PM-7AM** **Starting Hourly Pay Rate:** Intermediate Level: $33.43 Senior Level: $36.66 Advanced Level (CWI Required): $38.86 Opportunity for step pay increases at 90 days, 1 year & 2 years **Essential Functions:** + Responsible for testing and evaluation, with absolute integrity, of products to ensure conformance to company and customer specifications + Makes decision in the area of codes (includes AWS D1.1) and specifications. + Interprets reports for NDT and quality acceptance. + Actively mentors Entry level NDT Inspectors, which includes monitoring and documenting OJT progress + Has the authority to reject material, stop work in process etc. to minimize financial loss and risk of customer dissatisfaction. + Works under production conditions with accurate performance and completion of work within set time limits + Accountable and responsible for essential tools and equipment provided along with the maintenance of these tools, to include calibration + Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures + Maintain timely and consistent attendance + This position reports to the Quality Supervisor and has no direct reports **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities):** + A high awareness for safety at all times. + High School diploma and 5+ years of work/educational experience or Associates Degree with 2+ years' experience or Bachelor's Degree + 2 years' experience in fabricated steel environment + Ability to perform basic mathematic calculations, including conversion of fractions to decimals + Ability to use basic measuring tools, such as tape measure, calipers, fillet weld gauges, and levels (digital and conventional) to ensure dimensional accuracy. + Level II NDT certifications or be able to obtain Level II certification within agreed upon time by Valmont + Ability to operate NDT testing equipment. + Ability to work effectively with plant employees, supervisors, management and customers. + Ability to prioritize work in order to complete deadlines. Must also be able to work through problem with the minimum amount of assistance from the lead person or supervisor. + Ability to work timely and expeditiously to deliver an on-time result without errors. + A strong working knowledge of Microsoft Word, Excel, and Outlook **Highly Qualified Candidates Will Also Possess These Qualifications:** + 6 years' experience in fabricated steel environment + Associate Degree in NDT from an accredited school + SNT-TC-1A NDT Level II in UT, VT, MT, and PT + AWS CWI certification + Competence in basic quality assurance disciplines including the use of dimensional inspection and gauging equipment + AWS certification + Passion and integrity with the drive to excel and deliver exceptional result **Working Environment and Physical Efforts:** Work is typically performed in a manufacturing plant environment and the incumbent needs to be able to move about the office, shipping area and all areas of the plant which are producing product line for the company. There is a relatively constant exposure to somewhat disagreeable work conditions such as dust, dirt, heat, fumes, and cold as well as noise levels above 80 decibels. Work conditions vary throughout the week depending on the area of the plant assigned to work in. There will be visits to both indoor and outdoor locations during all seasons of the year. Many of the tasks are physical and the incumbent has to be able to lift up to 50 lbs. although the most frequent amount of weight lifted is 20 lbs. The employee is regularly required to reach with hands and arms. The incumbent is frequently required to stand, walk, sit, use hands to finger, handle, feel, as well as balance, stoop, kneel, crouch, talk, and hear. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, and depth perception. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description At Ultra Corpotech Inc., we are shaping the future of manufacturing through precision, performance, and people. As a global company with a new U.S.-based operation, we are committed to delivering world-class products while upholding the highest quality standards. We foster a dynamic work environment built on continuous improvement, collaboration, and innovation. Join us as we continue to grow and raise the bar in manufacturing excellence. Position Overview The Quality Control Inspector is responsible for conducting visual, dimensional, and mechanical inspections of raw materials, in-process components, and finished goods to ensure compliance with engineering specifications, industry standards, and customer requirements. This role also supports document control, warehouse operations, and continuous quality improvement initiatives. This is a dynamic, hands-on position ideal for a candidate with a manufacturing background who is adaptable, detail-oriented, and eager to learn new skills across multiple functions. Key Responsibilities Perform inspections on incoming materials, in-process parts, and finished goods using appropriate measurement tools. Use calipers, micrometers, height gauges, go/no-go gauges, thread gauges, and tape measures. Inspect components based on technical drawings, blueprints, work instructions, and customer specifications. Identify and document non-conformances (NCRs) and collaborate with production and quality teams for resolution. Maintain accurate inspection records, test results, and quality data logs. Conduct first article inspections (FAIs), final inspections, and spot checks. Assist with root cause analysis and corrective actions for internal and customer-related quality issues. Support ISO 9001 compliance and participate in quality audits and documentation processes. Help calibrate and verify measuring instruments; report any out-of-tolerance or damaged tools. Assist in document creation and control to ensure internal compliance with quality procedures. Collect data from the shop floor and participate in continuous improvement initiatives. Required Qualifications High school diploma or GED required; technical certifications preferred. Minimum 5 years of quality inspection experience in a manufacturing or fabrication setting. Proficiency in interpreting blueprints, technical drawings, and material specifications. Working knowledge of ISO 9001 standards and quality systems. Experience documenting non-conformances, conducting inspections, and completing reports. Familiarity with warehouse operations such as receiving, inventory, packaging, and basic maintenance. Experience using Microsoft Office (Excel, Word) and/or quality databases. Forklift operation experience required. Preferred Qualifications Experience in metal fabrication, machining, or sheet metal inspection. Familiarity with CMM (Coordinate Measuring Machine) operation is a strong plus. Bilingual in English and Spanish highly preferred. Experience working with ERP or QMS systems. Knowledge of packaging methods and warehouse data systems. Skills Strong attention to detail with a commitment to accuracy. Quick learner with the ability to adapt in a fast-paced, cross-functional environment. Excellent verbal and written communication skills. Ability to interact effectively with individuals at all skill levels. Team player with a proactive attitude and a focus on continuous improvement. Physical Requirements Must be able to stand, walk, bend, and lift up to 50 lbs. Ability to work in a manufacturing environment with exposure to noise, dust, and moving machinery. Use of hands and arms to operate tools, lift materials, and conduct inspections. Benefits Competitive hourly compensation with growth opportunities Health, dental, and vision insurance Paid time off and holidays Ongoing training and development Opportunity to be part of a rapidly growing company committed to excellence Ultra Corpotech Inc. is an equal opportunity employer and encourages applications from all qualified individuals. We thank all applicants for their interest; however, only those selected for an interview will be contacted. Please note that all offers of employment are contingent upon successful completion of a background check and drug screening. Ultra Corpotech Inc. is committed to maintaining a safe and productive work environment and conducts pre-employment screenings to ensure our standards are met.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.