Quality inspector jobs in Clay, NY - 55 jobs

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: The Final Inspector is accountable for preparing items for the shipping process to aide in process inspection of product after completion of processes. This position requires attention to detail, good communication skills, and the ability to read and comprehend technical requirements of the traveler and blueprint. This role will aid in other final inspection functions to establish compliance with order specifications and conformity. Duties and Responsibilities: * Measure, cut, and seal bags in preparation for shipping completed boards * Read, comprehend, and interpret travelers and drawings provided to assess requirements and special instructions required for jobs. * Have basic comprehension of IPC and military requirements. Must know where to go to obtain customer specific specifications. * Inspects product under magnifying tool for opens, shorts, contamination, soldermask/legend issues etc… * Compares size and location of holes to verify conformance to specifications when assisting for first article measurements. * Perform any rework operations (soldermask touch-up, remove burrs/rough spots, rework damaged areas, cover exposed copper areas with soldermask, clean and/or polish surface mount pads) that can be done inside the final inspection department. * Stamps mark of approval or rejection, or initials, on product or traveler. * Logs job in and out of ERP system with accurate counts of product. * Records data and complete scrap report forms. * Stacks finished boards with separator sheets for transfer to next work station. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Ability to read, write, and communicate in English * Ability to read and comprehend technical requirements of the traveler and blueprint * Ability to visually verify fine detail work * Lift up to 40 pounds. * Ability to work in a face pace environment and have strong attention to details and able to switch between different circuit board programs. * Must be able to handle interruptions to work flow as necessary to accommodate engineering requests. * Great attention to detail * Ability to look at screen/scope for long periods of time Education and Experience: Education: * High School diploma or equivalent preferred Required Experience: * Strong communication skills * Demonstrated experience in a role requiring technical aptitude Preferred Experience: * 3+ years of manufacturing experience * Experience within the aerospace industry or AS9100 and OFAC helpful * Printed circuit board and quality experience a plus #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $48,524 - $76,699 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Summary The primary responsibilities of this job profile include: Maintaining calibration database and records Controlling quality documents and revisions Processing RMAs and customer complaints Coordinating customer and third-party source inspections Supporting audits and quality reporting Position Scope : Supports the Quality Management System (QMS) by maintaining calibration and quality records, controlling documented information, coordinating customer returns and complaints, and supporting inspection activities. This role serves as a central point of coordination between Quality, Operations, Supply Chain, and Customers to ensure compliance with internal procedures and customer/regulatory requirements. Duties and Responsibilities : Maintain the calibration database for all inspection, measuring, and test equipment Schedule calibration activities and coordinate with internal teams and external calibration providers Track calibration status, certificates, and out-of-tolerance conditions Ensure calibration records are accurate, complete, and retained per record-retention requirements Process Return Material Authorizations (RMAs) in accordance with company procedures Log, track, and route customer complaints to appropriate functions Ensure timely investigation support and communication with internal teams Maintain complaint and RMA records, metrics, and closure status Coordinate customer and third-party source inspections Assist with internal and external audits (ISO 9001 / AS9100 / customer audits) Maintain quality records and databases Ensure controlled documents are reviewed, approved, released, and distributed correctly Track quality metrics and provide status reports as requested Support continuous improvement and corrective action activities Works to develop customer relationships through collaboration, respect, professionalism, trust and integrity. Listens to and understands customer requirements taking prompt, appropriate action that exceeds expectations Interface with the supplier quality, receiving, procurement, and additional production departments to obtain and compile all necessary documentation required for source inspection package. Perform all other related duties as assigned. Essential Knowledge, Skills, and Requirements : Ability to perform assigned tasks independently with limited supervision Ability to read and understand PCB drawings Ability to perform repetitive tasks accurately Must be a detailed oriented individual Ability to use measurement tools such as calipers, gauges, or CMM equipment Ability to work both independently or as part of a team Demonstrates ability to work in a dynamic, fast-paced work environment Ability to accurately perform basic computer tasks Requires understanding of related inter-department processes Ability to collect data and update measurements Strong communication skills in English-verbal & written, planning, and organizational skills. Strong computer skills and technical aptitude Ability to manage multiple administrative and written tasks professionally and accurately within designated timelines. Must be able to handle interruptions to work flow as necessary to accommodate requests. Education and Experience : Education: High school diploma or equivalent preferred. Experience: 1-2 years of manufacturing experience preferred. Experience within the aerospace industry (i.e AS9100, AS9102, IPC-6012, IPC-A-600) is a plus. Experience with calibration systems and document control. Strong computer skills and technical aptitude. Demonstrated ability to manage multiple administrative and written tasks professionally and accurately within designated timelines. Previous experience reading and interpreting GD&T requirements on manufacturing drawings helpful. PCB experience preferred, but not required. Experience with ETQ Reliance & Oracle a plus. #LI-MP1 Additional Job Description • Acquires job skills and learns company policies and procedures to complete routine tasks. • Works on assignments that are routine in nature, requiring limited judgement. • Has little or no role in decision making. Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $45,354 - $71,688 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Full-time Description Primary responsibility is the daily execution of all Quality Assurance processes. This includes all product testing, field testing, and data tracking. This team member must have a drive for continuous improvement in all processes, critical thinking skills, and the desire to lead by example. Responsibilities: Perform daily laboratory analyses capturing data points necessary to track the health of fermentation. Daily analyses include, but not limited to: Daily Brix, pH, Titratable Acidity, temperature, Free Sulfur Analysis, and Dissolved Oxygen Content Assist/lead with data collection, data entry, and reporting of compiled data Perform laboratory analyses to effectively monitor fermentation health Be responsible for the cleaning and calibration of all laboratory equipment/machines Ensure that all team members uphold Blake's Quality Standards Perform routine checks on packaging line throughout the day to ensure equipment and product is being held up to industry standards Perform Incoming ingredient and material inspections for compliance with food safety programs Willing to assist in any other tasks or duties as requested by the manager Education, Skills & Knowledge: High school diploma or general education degree (GED) required Preference of 1-2 years of experience working in a lab Well-developed tasting skills Understanding of Food and Beverage Industry Computer proficient in Excel and Word Good organizational, planning, and presentation skills Clear commitment to high quality and attention to details Able to work independently with minimum supervision. Must have the ability to be on your feet for an entire shift. Strong attention to detail Knowledge of GFCO and GMPs preferred On-site training available and Course training available periodically Working Conditions: The work for this position will be in a climate-controlled, smoke-free environment. The noise level in the work environment is usually moderate with some periods being loud. Work will be performed as per the schedule you create for the team. Some weekend work required as needed. Must be able to work safely in both hot and cold environments Requirements Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor. Salary Description $19-$21/hr

Description: Primary responsibility is the daily execution of all Quality Assurance processes. This includes all product testing, field testing, and data tracking. This team member must have a drive for continuous improvement in all processes, critical thinking skills, and the desire to lead by example. Responsibilities: Perform daily laboratory analyses capturing data points necessary to track the health of fermentation. Daily analyses include, but not limited to: Daily Brix, pH, Titratable Acidity, temperature, Free Sulfur Analysis, and Dissolved Oxygen Content Assist/lead with data collection, data entry, and reporting of compiled data Perform laboratory analyses to effectively monitor fermentation health Be responsible for the cleaning and calibration of all laboratory equipment/machines Ensure that all team members uphold Blake's Quality Standards Perform routine checks on packaging line throughout the day to ensure equipment and product is being held up to industry standards Perform Incoming ingredient and material inspections for compliance with food safety programs Willing to assist in any other tasks or duties as requested by the manager Education, Skills & Knowledge: High school diploma or general education degree (GED) required Preference of 1-2 years of experience working in a lab Well-developed tasting skills Understanding of Food and Beverage Industry Computer proficient in Excel and Word Good organizational, planning, and presentation skills Clear commitment to high quality and attention to details Able to work independently with minimum supervision. Must have the ability to be on your feet for an entire shift. Strong attention to detail Knowledge of GFCO and GMPs preferred On-site training available and Course training available periodically Working Conditions: The work for this position will be in a climate-controlled, smoke-free environment. The noise level in the work environment is usually moderate with some periods being loud. Work will be performed as per the schedule you create for the team. Some weekend work required as needed. Must be able to work safely in both hot and cold environments Requirements: Additional Duties: This job description in no way states or implies that these are the only duties to be performed. You will be expected to follow any other job-related instructions and to perform other job-related duties as requested by your supervisor.

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback on final inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.84 - $34.57 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Temp To Full-Time Extrusion Quality Auditor Hours: 3rd Shift: Sunday - Thursday 11:00pm - 7:00am Pay: $17.00 to $20.00 an hour depending on experience Requirements High School Diploma or GED Responsible for evaluating, documenting, and dispositioning the conformity of materials and products being manufactured Ability to follow and execute detailed processes/directions Must work effectively in a team environment in a culturally diverse workplace Previous warehouse/manufacturing experience preferred Steel toe boots/shoes required Benefits Temp to Hire Position Weekly Pay Benefits once hired on Responsibilities Audit materials and products being manufactured Excellent communication to communicate conformity status with details Maintaining records Ability to use measuring equipment for auditing Maintain standards in a fast-paced and dynamic environment Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations Performs all other duties as assigned What happens next: If you are motivated, dependable, and are looking to jump start your career please apply now with your updated resume. We will proceed to the next steps if your skills and experience look like a good fit for the position. Even if this position does not work out, your information is still in our database. That means all our recruiters will have access to your profile, expanding your opportunities even more. Staffworks is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity or any other basis protected by federal, state or local law. Apply now for consideration!

Are you ready to join a company that values tradition, innovation, and excellence? At Midstate Spring, we are proud to be the last great American Springmaker, crafting precision springs since 1939. Our fully climate-controlled facility in Syracuse offers a comfortable work environment year-round. We provide comprehensive training, abundant career growth opportunities, and a collaborative team atmosphere. If you are passionate about quality, attention to detail, and making a tangible impact, Midstate Spring is the perfect place for you. Job Summary: The Quality Inspector plays a key role in supporting the Quality Manager and ensuring adherence to Midstate Spring's Quality Management System. This position is primarily responsible for conducting visual and dimensional inspections, monitoring quality throughout the production process, and accurately documenting inspection results. The Inspector helps identify and communicate process trends, supports lot control and traceability, and ensures that products meet internal and customer specifications. This role contributes to defect prevention, operational consistency, and overall product quality, while offering hands-on experience in precision spring manufacturing and the opportunity to directly support customer satisfaction and compliance. Duties/Responsibilities: Gather, record, and plot Statistical Process Control (SPC) data to monitor production quality trends. Document, track, and support the resolution of internal and external quality issues. Conduct root cause investigations and assist in implementing corrective and preventive actions. Conduct 100% inspection, sorting, and packaging of parts as required to meet customer quality standards. Create and maintain ISO documentation and support audit processes. Perform part inspections as assigned to verify conformance to specifications. Complete compliance requests from customers. Maintain general housekeeping standards within the quality work area and assist in other duties as assigned. Required Skills/Abilities: Basic computer skills required, including Microsoft Office, email composition and other communication/collaborative tools. Must be able to type at least 45 words per minute. Education and Experience: Associate's degree in a technical field or equivalent; relevant work experience may be considered in lieu of a formal degree. 1-3 years of manufacturing experience in an industrial environment. Benefits: Benefits include health, dental & life insurance, available the first of the month following date of hire. 401K (with match) is available January 1st or July 1st after 6 months of service. Paid Time Off (PTO) is awarded upon hire and on a quarterly basis. We offer opportunities for professional development and advancement, a dynamic and supportive work environment with the chance to be part of a growing company committed to quality and sustainability. Physical Requirements: Lifting: 50 lbs. Carrying: 50 lbs. Pushing: 50 lbs. Pulling: 50 lbs. Standing: 40% Walking: 5% Sitting: 55% If you enjoy hands-on work, possess a keen eye for detail, and are eager to learn, Midstate Spring could be the perfect place for you. Apply today to join our dedicated team and contribute to our mission of excellence in spring manufacturing. EOE Statement: Midstate Spring, Inc. is dedicated to being an equal opportunity employer. We recruit, employ, train, compensate, and promote employees without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state, or local laws. At Midstate Spring, we believe in equal opportunity for all. We are committed to ensuring that every individual, including those with disabilities, has the opportunity to apply for positions they are interested in and qualify for, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. We are also committed to providing reasonable accommodations to qualified individuals so they can perform their job-related duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation due to a disability, please contact Amy Clifford at ************. If you enjoy hands-on work, possess a keen eye for detail, and are eager to learn, Midstate Spring could be the perfect place for you. Apply today to join our dedicated team and contribute to our mission of excellence in spring manufacturing.

As a valued member of our team, you will conduct first piece, incoming, in-process and finished goods inspections as directed by the Q.C. Manager or Supervisor. You'll maintain the necessary records to meet both company and customer documentation requirements. Additionally, you'll evaluate and document Customer Returns, ensuring our high standards of quality are consistently met. Tasks and Responsibilities: Conduct First Article Inspection on new products and/or revised products. Inspection throughout the entire manufacturing process including inspection of raw materials, parts, sub-assemblies and finished goods. Ensure appropriate action is taken when non-conforming material is found. Make production run or hold recommendations based on the critically of the defect. Ensure operators are processing or assembling material according to Work Orders and/or BOM. Communicate discrepancies to the attention of the Supervisor, Assistant Q.C. Manager and Q.C. Manager Document performed inspections including non-conforming product found during the inspection process. Create DMR's in Epicor for all non-conforming product. Operate basic measuring devices like micrometers, calipers, height gages, etc. Follow Q.C. procedures, plans and test procedures as outlined Examine, disposition and document customer returns. Maintain good housekeeping and safety in all of the quality control work areas Prompt completion of tasks assigned by Quality Management. All other tasks so assigned. Who You Are: High school diploma or equivalent education required Prior experience in Quality Control and/or Manufacturing preferred You are detail-oriented, capable of reviewing and documenting a high volume of product evaluations You are a skilled written and verbal communicator You possess excellent time management skills and can prioritize various tasks as assigned by the Quality Control Manager to ensure their completion in a timely manner You are capable of operating basic measuring devices (such as micrometers, calipers, height gauges, etc.) You are a team player who likes to work collaboratively Second and third shift employee must be able to train on first shift The Fountainhead Group, Inc. is a family-owned and operated company, dedicated to the success and longevity of our business, our employees, and our community. For more than 130 years, FGI has been creating, innovating, and manufacturing liquid sprayer products for the world's top brands and retailers, driven by the hard work of our FGI Family of employees. Across four manufacturing and distribution centers in CNY, our commitment to the betterment of our employees and our community is demonstrated in our robust philanthropy and volunteer programs, supporting more than 350+ local nonprofits and ensuring the success of the community for generations of the FGI Family to come. The Fountainhead Group Inc. is an AAE/EEO employer. In addition to a competitive salary, we are pleased to offer the following benefit package: Medical Dental Paid Vacation Holiday Pay 401k with employer match up to 2% Tuition Reimbursement Health Reimbursement Account (HRA) Flexible Spending Account (FSA) Employer paid Life Insurance Employee paid Voluntary Life and Short Term Disability Coverage Company Website ************************************* To learn more about our company culture and commitment to the local community, visit the “Community” page of our website and be sure to follow our Facebook account for exciting updates and events! ************************************** *************************************

Job DescriptionDescription: The Quality Assurance Inspector reports to the Corporate Quality Manager to ensure manufacturing meets the requirements on drawings (ie: applicable Codes and Standards, customer specifications, and Feldmeier Equipment SOPs). Requirements: Essential Minimum Duties and Responsibilities: Verification of incoming materials and components Use XRF for positive material identification Proficiently use calipers and tape measure for inspection of parts Ensure manufacturing meets requirements on drawings (ie: applicable Codes and standards, customer specifications, and Feldmeier Equipment SOPs). Meet qualification requirements and maintain Certified Individual UM Certification Supervise welding tests as needed Review travelers for release to production Verify correct build up from drawings Verify correct surface finishes are met Perform lay-out, fit-up, and final weld inspections Witness and sign off on hydrotesting of vessels and/or heat transfer surface Verify correct welding procedures are used Complete inspection reports and ensure travelers are correctly and accurately completed Create ASME and non-code nameplates Perform final inspection of equipment prior to shipment Review final job packages to prepare and sign Manufacturer's Data Reports Work with production staff and Engineering Prepare internal Non-Conformance reports for review by the Quality Manager Communicate concerns to the Corporate Quality Assurance Manager and Plant Manager

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants Read construction documents and specifications and correctly interpret test results Record and report test results in a clear, concise manner Complete each testing assignment accurately and in accordance with the appropriate standards Turn in field data records and completed reports for each project daily Communicate regularly with direct supervisor to provide updates on project details Complete continuing education and preparation for additional certifications Qualifications High School Diploma required Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Familiarity with construction materials, procedures and documents a plus Must possess and maintain a valid driver's license Must possess reliable transportation and current/required automotive insurance coverage Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job DescriptionDescription: The Quality Inspector is responsible for ensuring that airport lighting hardware and related components meet all applicable quality, safety, and regulatory requirements prior to shipment. This role performs detailed inspections throughout the manufacturing process, verifies conformance to engineering drawings and specifications, and supports continuous improvement efforts in a safety-critical manufacturing environment. Requirements: ESSENTIAL JOB DUTIES: • Inspect incoming materials, in-process assemblies, and finished airport lighting hardware to verify compliance with engineering drawings, specifications, and quality standards. • Perform visual, mechanical, and dimensional inspections using calibrated measuring and test equipment. • Verify proper assembly of electrical and mechanical components, including housings, wiring, weld seals, and mounting hardware. • Review work orders, bills of materials, and production documentation for accuracy and completeness. • Identify, document, and report nonconforming materials or products in accordance with company procedures. • Initiate and support corrective and preventive actions (CAPA) by providing inspection data and observations. • Conduct monthly internal audits of our inspection failure rate. • Maintain accurate inspection records, test results, and quality documentation in paper and/or electronic systems. • Ensure compliance with applicable FAA standards, customer specifications, and internal quality system requirements (e.g., ISO 9001). • Work closely with production, engineering, and quality to resolve quality issues and prevent recurrence and reduce scrap and other errors. • Verify and renew calibration status of inspection instruments and test equipment. • Support audits (internal, customer, or regulatory) by providing documentation and inspection evidence. • Promote and follow all safety policies, procedures, and good manufacturing practices. • Performs other duties as assigned Qualifications: • High school diploma or equivalent required; technical or vocational training preferred. • Minimum of 1-3 years of quality inspection experience in a manufacturing environment; electrical or electromechanical product experience strongly preferred. • Ability to read and interpret engineering drawings, schematics, specifications, and work instructions. • Proficiency using measuring tools such as calipers, micrometers, gauges, and multimeters. • Basic understanding of quality systems and inspection methodologies. • Strong attention to detail and ability to identify defects or deviations. • Effective written and verbal communication skills. • Basic computer skills, including use of inspection forms and quality databases. • Familiarity with FAA standards related to airport lighting or similar regulated products helpful. • Knowledge of ISO 9001 or similar quality management systems. • Experience performing root cause analysis or supporting corrective actions desired. EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Basic personal computer skills that include the ability to send/receive e-mail messages. May be required to operate Computer, Email, Microsoft Excel, Printer, Copier, Fax Machine, Telephone, Scanner, and calculator, micrometers and gages, power tools, hand tools, forklifts and pallet jacks. PHYSICAL ACTIVITIES AND DEMANDS: Moderate Lifting: Exerting up to 20 pounds of force frequently and/or up to 50 pounds of force ocassionally and/or a negligible amount of force frequently to move objects.

As Saab, Inc. is growing in East Syracuse, NY, we are seeking a Senior Quality Inspector, In-Process Inspection to: Authorize assembly process completion and support the build team with in-process inspections during the build process. Validate visually and dimensionally that the product meets requirements compared to engineering drawings. Inspect for defects in surfaces, fasteners, sealant, paint, and testing. Compile technical data and reports to provide feedback onfinal inspection results and recommended corrective actions. Develop deviation reports and represent quality at the Material Review Board. Be responsible for non-conforming material processes and procedures. Deliver high level of workmanship in inspection processes for structural assembly and system installations. Experienced in quality management systems and become a subject matter expert in the company management system. Participate in tooling validation and application to meet product requirements in quality and efficiencies. Develop standardization for working procedures for high repeatability. Compensation Range: $28.84 - $34.57 per hour The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: High school degree or equivalent required. Technical degree or certification in the field of electro/mechanical assembly, mechanics, or maintenance is preferred. 5+ years of qualified inspection experience in manufacturing. Experience with ISO/AS9100 and highly standardized processes. Strong communication skills and ability to work as a team. Proficiency interpreting engineering drawings and specifications in written and digital format required. Ability to execute the appropriate working methods and select the right tools to meet the right level of quality and efficiency. Ability to work with standardized procedures for high repeatability in a highly advanced and connected environment. Excellent communication and team working skills. Physical Requirements: Must be self-mobile and able to stand for extended periods. Ability to perform physical tasks such as sitting, bending, stooping, walking, climbing, reaching during a normal workday. Ability to perform repetitive motions (such as lifting or assembly of parts) including the use of hand held power tools. Ability to lift up to fifty (50) pounds. Hearing and vision within normal ranges is important for conversations, and to receive ordinary information and directives from Production Supervisors and management as required. Ability to work extended hours when required. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job Description Job Title: Quality Inspector Company Overview: At AVStar, we pride ourselves on delivering superior products in the general aviation sector. We are committed to fostering a fast-paced, collaborative environment where your contributions truly matter. Join our dedicated team and play a crucial role in our mission to achieve customer satisfaction and company success. Position Summary: We are seeking experienced Quality Inspectors to join our team. This role offers hands-on challenges and opportunities for growth as you work with a diverse array of parts in a supportive environment. If you are passionate about manufacturing processes and want to be part of a brilliant, cohesive team, we want to hear from you! AVStar NY is currently seeking an experienced 1st shift Quality Control Inspector for our Auburn, NY location. For more information about AVStar, please view our video at ********************* Position Summary: Perform inspection operations while working from drawings, customer specifications and process operating documents on moderately complex machined parts Key Responsibilities Include: Inspects finished precision machined products, including in process, incoming materials, parts, and assemblies, etc., for conformance to company standards Inspects randomly selected samples to verify accuracy Familiar with precision measuring instruments and devices Perform first piece, first article and final inspection Offers suggestions to improve/enhance the inspection process Capable of interpreting blueprints Understanding of geometric tolerance Coordinates with personnel for resolutions to quality issues Required Qualifications: High School Diploma Work Experience: 2 years' experience measuring precision machined parts CMM Experience, preferably Zeiss Key Competencies Include: Ability to perform assigned tasks independently with limited supervision Ability to read and understand component and assembly drawings Ability to perform repetitive tasks accurately Must be a detail-oriented individual Ability to use simple measurement tools such as calipers or gauges Ability to work both independently and as part of a team Demonstrates ability to work in a dynamic, fast-paced work environment Ability to accurately perform basic computer tasks Requires understanding of related inter-department processes Must work with a limited number of outside departments Ability to collect data and update measurements Pay Range: $23.00 - $26.00 depending on experience AVStar offers a comprehensive and competitive compensation and benefits package, including: Health insurance with substantial Company Contribution. Simple IRA Retirement Plan with Employer Match Dental, and Vision Insurance as offered Life Insurance for each employee Nine Paid Holidays Vacation Pay Equal Opportunity Employer: Disability/Veteran Job Posted by ApplicantPro

Direct Hire Beyond TalentEdge has partnered with a global leader in the design and manufacture of engineered solutions in search of a Quality Control Inspector to join their team. This role is Direct hire; we invite you to apply today! Responsibilities: Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as profilometer, optical comparator, height gauge, microscope, smart scope and CMM. Perform incoming and receiving inspection to specified requirements. Perform inspection of finished details and assemblies to specified requirements. Performs Statistical Process Control (SPC) analysis. Enter inspection results into a variety of data collection tools and databases. Inspection of welded and brazed assemblies. Candidate requires internal certification of weld inspection. Keep accurate records and maintain quality documentation. Perform inventory movement transactions in the ERP system and ensure traceability of product. Understand the non-conforming material process to ensure control of material. Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner. Write clear material rejection reports that contain problem statements, dimensions, and data. Retrieve test data from databases and assemble documentation packages to ship with the product. Proficient in multiple customer websites and requirements in order to assemble documents and perform DSQR (customer delegated source inspection). Use Syteline (ERP System) in order to retrieve quality requirements and perform tasks related to moving product in system. Understand the return material process in order to assemble parts and documentation for eventual shipment back to the customer. Perform tasks as assigned by the Inspection department Supervisor or Quality Manager Requirement Qualifications: Minimum education is High School Diploma Associates or higher in Technical Discipline/Trade preferred Minimum 3 years in a precision manufacturing or machining environment Basic Statistical Process Control and Statistical Fundamentals Minimum 3 years in a precision manufacturing or machining environment Experience with computer software like; Statistical Software, Access, advanced Excel Experience in writing programs in Calypso Salary & Schedule: $20-25 an hour or more depending on experience Schedule: Monday- Friday 8am- 5:00pm Benefits: PTO, Holiday, 401k “Beyond TalentEdge is an Equal Opportunity Employer. It is the policy of Beyond TalentEdge to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition,predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.”

The Baillie Group, a leading hardwood lumber company, is seeking a knowledgeable and detail-oriented Quality Control Inspector to join our Lumber Yard operation in Smyrna, NY. This role is critical to maintaining our high standards for hardwood lumber quality and customer satisfaction. The ideal candidate will have strong NHLA lumber grading experience and a commitment to accuracy, consistency, and continuous improvement. Quality Control Inspector Responsibilities Inspect hardwood lumber for grade, quality, and compliance with NHLA grading rules Verify lumber dimensions, moisture content, and appearance standards Identify defects and ensure proper classification and documentation Work closely with production, yard, and sales teams to resolve quality-related issues Maintain accurate inspection records and quality reports Assist in training and supporting production staff on quality standards and grading expectations Ensure company quality control procedures and safety standards are consistently followed Quality Control Inspector Education & Experience Required: NHLA hardwood lumber grading experience Strong knowledge of hardwood species, grades, and defects High attention to detail and strong organizational skills Ability to work independently and make sound grading decisions Effective communication skills and a team-oriented mindset Prior experience in a hardwood sawmill, concentration yard, or lumber manufacturing environment preferred Quality Control Inspector Pay & Benefits Minimum - Anticipated Maximum Salary: $20/hr. - $24/hr.* Stable, full-time opportunity with a respected hardwood lumber company Collaborative work environment with opportunities for growth Commitment to quality, safety, and employee development Baillie Lumber Co. is one of North America's largest hardwood lumber manufacturers, distributors and exporters. We are a provider of hardwood logs, hardwood lumber and proprietary grade hardwood lumber products. *The advertised pay range represents what Baillie Lumber Co. believes we would anticipate paying for this position. It is not typical for an individual to be compensated at the top of the range for a position as candidates must possess experience and qualifications that far exceed the requirements.

FOR INTERNAL USE ONLY Final Inspector 1 Grade: H30 EEOC Classification: Operatives FLSA Status: Non-Exempt About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: The employee performs inspection of components, sub-assemblies, and fully assembled products. The employee would be responsible for gauging, measuring, and visually inspecting product, including all associated paperwork, making sure that it complies with our print specifications. Key Responsibilities : Understanding and inspecting a wide variety of interrelated dimensions and surface finishes. Responsible for inspection of in-process and processed parts. Performs special inspection set-ups either on machines or at benches. Use and understand all applicable instruments and gages such as height gauge, thread gauges, micrometers, calipers, ring gauges, depth gauges, and comparator. Required to read and understand complex blueprints, procedures, travelers, and comp cards. Utilize Excel files and Team Improvement Boards to collect and display FTY information. Work closely with Group Leaders and Team Leaders on problem solving activities. Utilize main frame system for scan/verify operations. Work with Planner and Team Leader on daily shipments. Work closely with both the teams Quality and Manufacturing Engineers when quality issues arise, ability to understand internal MDR/MRB and external case record requirements. Meet all requirements of VCT Inspection (S19)-Knowledge of proper use of stamps, router systems, move/stock systems, “hold” and “Variations” systems, and material release systems. Meet all requirements of Specific Hand Deburr (A07)-Demonstrate use of hand tools to a specific operation. Explain paperwork responsibility. Interpret process and allowable practices. Demonstrate ability to work under microscope. Knowledge of routine maintenance of tools. Ability to use both dot peen and laser marking systems, along with associated verification devices. May be expected to train others in the role of Final Inspection in value streams for which he/she are certified. Pass internal certification requirements in order to judge hardware cosmetics as directed by our customer assessed by the Quality Leader. Required Qualifications: Possess a High School Diploma or Equivalent preferred Knowledge of welding terms and symbols, sectioning and polishing techniques, and use of lab microscopes. Basic understanding of Microsoft Office suite Preferred Qualifications: Experience in manufacturing environment minimum of 2 years Background in inspection including hard gaging, use of calipers, micrometers, and visual inspection minimum of 1 year Experience with the deburring of metal hardware Experience with weld and/or inspection of weld or braze Key Competencies Include: Demonstrates accurate record keeping ability. Possess knowledge of machining and welding procedures. Advanced knowledge and use of standard and special gaging and comparators. Strong communication skills. Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the team member is required to walk, stand, stoop, bend, crawl, climb and sit for extended periods of time. The team member is required to demonstrate manual dexterity and use hands to operate machinery. Specific vision abilities required by this job include close vision. Also expected of the team member is regular attendance and the ability to work cooperatively and professionally with others. May be required to lift up to 50 lbs.

Join our team as an Quality Technician On-Site at our Pulaski Location The Quality Control Technician's primary responsibilities include maintaining QA/QC Processes, QC Testing of products/materials, data analysis, investigation of defects and complaints as they arise, and maintaining a compliant, safe, and clean Quality Lab. The QC Tech will have a heightened focus on the newly-commissioned Coating Line Products; however, cross-training on our well-established Converting Processes will also be provided. This role provides: * Ample room for learning and growth * Opportunity to be foundational in helping to formulate and implement new quality practices and testing procedures * Cross-Functional collaboration between customer service, production, logistics, and our newly revitalized R&I Department * Training and utilization of SAP Software Responsibilities: * Maintain a safe & cleanly lab environment * Conduct and record results of Product QC Testing * Utilize and maintain QC Test Equipment * Help with the creation, maintenance, and implementation of QC Tests and their associated SOPs/Work Instructions * Overview and maintenance of the Ametek Web Inspection Software System & its applications/data * Input documentation of QC Findings in applicable software/ worksheets * Aid in investigations of complaints and production quality issues as they arise * Release/ disposition Finished Good and Non-Conforming Material * Collaborate with R&I to assist on trials and qualifying new products * Collaborate with Production to identify product defects as they arise and communicating any necessary immediate actions * Ensure customer specs of finished product and packaging are met/ maintained * Manage and maintain equipment and calibrations * Help in coordination of, and participate in, internal and external audits * Conduct Risk Assessments, Root-Cause Analysis, and other Quality-related functions that assist in identification and resolution of systemic and product issues * Other Quality-Related activities and opportunities as assigned by the Quality Manager Requirements: * Excellent written and verbal communication * Strong aptitude for analytics and pattern recognition * Technical Skills/Experience with use of calibration and measuring equipment * Team Player that enjoys collaboration of ideas and departments * Detailed Oriented, with good organizational and time-management skills * Associate Degree/ equivalent education or transferable prior work experience, preferred * Microsoft Experience (Word, Excel, Outlook, etc.) * SAP Knowledge/Experience * Understanding of coating, converting, and basic quality testing * Lean Manufacturing Experience * Must be able to stand for long periods of time and lift objects up to 50 lbs. Salary/Hourly starting at $20.00 Benefits and Culture: * Interesting, demanding activities in an international company with worldwide locations * Flexibility in job management with the goal of providing a healthy work-life balance * Appreciative company culture with both sides giving their best Do you want to become part of the Felix Schoeller family and join us in shaping your and our future together? Then send us your resume by applying online. We look forward to hearing from you! FELIX SCHOELLER NORTH AMERICA Pulaski Site | 179 County Route 2A | 13142 Pulaski | NY | USA careers.felix-schoeller.com Human Resources - Pulaski | Questions? Email: **************************

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Join our team as a Construction Materials Testing Technician, providing hands-on testing and inspection services for commercial construction projects. This role offers dynamic day trips throughout the Greater Syracuse, NY area, ensuring quality and compliance on-site. Responsibilities Perform quality assurance testing on construction materials such as soils and concrete at commercial job sites. Interpret construction drawings and specifications accurately, ensuring test results align with project requirements. Complete all testing assignments with precision, adhering to applicable standards and industry best practices. Document and report findings clearly and concisely, providing reliable data for project teams. Maintain open communication with supervisors, delivering timely updates on project progress and test outcomes. Pursue ongoing professional development, including preparation for certifications through the American Concrete Institute (ACI) and International Code Council (ICC). Qualifications High school diploma required; an associate or bachelor's degree in civil engineering, engineering technology, geology, or a related field is preferred but not mandatory. Ability and willingness to obtain industry certifications through the American Concrete Institute (ACI) and International Code Council (ICC) - full support provided by CME. Familiarity with construction materials, procedures, and documentation is a plus. Valid driver's license and ability to travel to project sites as needed. Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job Description3rd Shift Quality Control InspectorHours: 11PM..-7:30AM. Monday-Friday Quality Control Inspector will be responsible for first piece, incoming, in process and finished goods inspections as directed by the Assistant Q.C. Manager. Will maintain the appropriate records to comply with the company and customer documentation requirements., and will be responsible for the evaluation and documentation of all Customer Returns. Qualifications: High School diploma / GED Minimum of 3 years' experience as a quality control inspector or a minimum of 3 years in manufacturing.Experience using measuring devices Blue print reading experience Requirements:Must be able to read and write English Must be able to work overtime Must have good attendance Must be able to perform mathematical equations What's in it for you?Staffworks associates are eligible for the following: Accrued Paid Sick Leave Referral Bonus Incentives Become eligible for Health Insurance* and More!!