Quality inspector jobs in Cleveland, OH

" PURPOSE In the plant, the purpose of the Processing Technician is to be proficient in all areas of Processing in accordance with established methods in order to provide process control support and assure food quality and food safety. PRINCIPAL DUTIES Assures regulatory compliance, process controls and safety standards are met. Maintains high sanitary standards. Communicates with other employees. Processes milk and milk products. Cleans and sanitizes equipment. Unloads milk and cream. Maintains good housekeeping. Performs testing on incoming ingredients and work in progress. Documentation and recordkeeping GENERAL DESCRIPTION The Processing Technician is responsible for unloading of milk / cream tankers, pasteurizing and operating a wide variety of in processing equipment. The processing department uses methods in blending, heat treatment, and in process controls to produce high quality products for our customers. Processing Technicians have dairy, food, or beverage manufacturing experience and should be able to operate a state-of-the-art processing system through both automated and manual controls. Technicians need to be familiar with Good Manufacturing Practices and clean in place process systems. The employee may be responsible for performing daily verification checks at the critical control point of temperature (Cut-In, Cut-Out and Indicator Checks). If operating the pasteurizer, the processing Technician must be trained in HACCP and pasteurization operation. In the absence of the Processing Team Supervisor/Technician a designated trained back up Processing Team Supervisor/Technician will assume these responsibilities and must have had HACCP and Pasteurization Training. The Processing Team Supervisor/Technician has the authority to take immediate corrective actions when dealing with Food Safety and Food Quality issues and is required to report these issues to his/her immediate supervisor and/or Quality Manager for further action if required. Another Processing Team Supervisor/Technician or an assigned qualified Processing Team Representative will fill in for the Processing Team Supervisor/Technician in their absence. QUALIFICATIONS Minimum requirement of a High School diploma or G.E.D 3-5 years in a manufacturing environment in the food and beverage industry Mechanical/electrical skills Ability to solve problems Attention to detail regarding machine operation Must be computer literate Job requires frequent bending, lifting and twisting Must be able to lift 50 pounds or more EXPECTED SKILLS Strong analytical and applied problem solving skills Computer skills Personal organizational skills Communication skills DESIRED EXPERIENCE Animal husbandry or (farm) milk production Experience in a food/dairy production environment is desirable Processing operation experience is desirable PAY RATE $20+/hr For more than four generations (over 100 years), Daisy Brand has been a family-owned company committed to providing the freshest, most wholesome dairy products with over half a billion in revenues. The company is headquartered in Dallas, Texas with manufacturing plants in Garland, Texas (opened in 1998), Casa Grande, Arizona (opened in 2008), and Wooster, Ohio (opened in late 2015). Having grown to above a 50 share, Daisy Sour Cream is the Nations number one brand with distribution in all 50 states. Additionally, Daisy is the largest brand in food service, military, and club and is recognized by consumers for A Dollop of Daisy, a tagline that put this once small brand on the map. Daisy's core values are Clean and Trust, which are woven into everything we do. In 2008, the company was given the impressive American Business Ethics award, awarded by Foundation for Financial Service Professionals. While maintaining a strong culture of curious and innovative problem-solvers, Daisy Brand tripled employment over the last 15 years. The future looks bright with the opening of its third facility to further strengthen the foundation for growth. Daisy Brand offers an industry leading benefits package that includes: A no-deductible, $0 premium option for employee-only health coverage. 401(k) with 50% company match on first 8% of earnings you contribute. Safe harbor and profit sharing company contributions to 401(k). Company paid short and long term disability coverage. Company paid 2X annual salary life and AD&D insurance. 4 weeks annual paid time off. Extra time off for volunteering. Tuition reimbursement. Fitness membership reimbursement. And more Daisy Brand is a nicotine-free company. Daisy Brand is an Equal Opportunity Employer. Veterans and disabled encouraged to apply. "

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($45,968.00 - $68,952.00) Target Bonus: % Req ID: 27455 Purpose Initiate, support, and lead Production Team activities targeting Quality continuous improvement and assurance within Machine Division. Reports to Quality Assurance Supervisor. Job Description Promote an atmosphere of continuous process and employee improvement. Support or drive Continuous Improvement activities. Enforce Quality standards in all facets of the assigned areas. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Follow all significant product, document and process changes which affect Quality. Work with departmental supervision in developing and maintaining a trained work force. Support Manufacturing Engineering, Manufacturing, and Research and Development in the Design, Introduction, Inspection and Maintenance of new and existing equipment. Define, troubleshoot and assist in the measurement and resolution of daily production Quality problems. Must have an uncompromising attitude towards Quality. Maintain manufacturing Quality performance metrics and/or Quality records. Help production departments manage Quality aspects of Stop Shipment process. Take active role in Stop Ship investigations and Stop Ship rework tracking/coordination. Take active role in analysis of scrap and yield opportunities. Perform work center, finished product and process audits, as required. Create Process Maps. Initiate CAPA Determinations. Report safety near misses and incidents whenever applicable. Basic Requirements Technician III: Vocational training and 5+ years of experience in a relevant work environment is required; or High School Diploma/GED with 7+ years experience in a relevant work environment. a. Completes a variety of atypical assignments b. Works with a limited degree of supervision, with oversight focused only on complex new assignment c. Acts as an informal resource for colleagues with less experience Technician IV: Vocational training and 8+ years of experience in a relevant work environment is required; or High School Diploma/GED with 10+ years' experience in a relevant work environment. a. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience b. Works autonomously within established procedures and practices c. May act as a lead, coordinating and facilitating the work of others Ability to work effectively and cross-functionally on the shop floor on a regular basis. Demonstrated computer skills in MS Office and Windows operating system. Ability to develop and maintain records and to follow projects through to conclusion. Basic understanding and knowledge of manufacturing engineering and Quality standards. Ability to use measurement and inspection tools such as Calipers, Micrometers, Pins, Gauges, Protractor, and Scale. Capable of frequent standing and walking and lifting up to 60 lbs. Must have excellent attendance, safety and work record. Ability to work rotating shifts. Environmental, Health and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Training Requirements Additional training in Quality Management System, REQ1, OP114, OP191, OP203, applicable work instructions and any others as needed. Additional training in Six Sigma methodology, 5S, Lean, Root Cause Analysis, Process Mapping, Lincoln Electric Service School, as required. See RE150 for complete list of training requirements. Personal Protective Equipment: PPE per EHS 560. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Job Title: Quality Control Inspector Euclid, OH Monday-Friday, 6:00 AM - 2:30 PM Pay & Benefits Starting pay: $20-$25/hour, depending on experience Contract-to-hire opportunity with regular reviews and performance-based raises Once hired on: Medical, dental, and vision (Medical Mutual) - eligibility begins 60 days after hire IRA with 3% company match - eligible after 1 year PTO and vacation - 1 week after the first year Paid holidays Job Responsibilities As a Quality Control Inspector in a precision machining environment, you'll play a key role in ensuring that all products meet strict standards before they ship. Your day-to-day duties will include: Performing 1st article, in-process, and final inspections on machined parts Using precision tools such as calipers, micrometers, and height gauges Conducting visual inspections to detect surface or dimensional defects Approving parts for shipment or identifying rework needs Recording and reporting inspection results in the quality system database Working directly with the Quality Manager to uphold standards Lifting parts up to 40 lbs as needed Required Qualifications 1.5 to 3 years' experience in manufacturing quality control Comfortable using inspection tools and reading blueprints Strong understanding of tight tolerances Excellent attention to detail, logic, and communication skills Proficient in English - able to read, write, and communicate clearly Comfortable standing and bending throughout the shift Basic computer and data entry skills required GD&T (Geometric Dimensioning & Tolerancing) experience is a plus Dress Code & Work Environment Steel toe boots, jeans, and t-shirt required Clean, well-lit 20,000 sq. ft. facility Friendly, collaborative environment with both men and women working in the shop Projects range from small prototypes to large production runs #TalrooMentor

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Quality Inspector is responsible for assisting in the administration of the quality functions at a site to ensure adherence to ISO 9001, ISO 13485, MDSAP, FDA 21 CFR Part 820/211, EU MDR, and other applicable regulatory standards. Quality Inspectors support manufacturing and servicing operations by performing incoming component and in-process product inspections using standard measurement equipment. They identify, segregate, and document rejected material and participate in Material Review Boards to ensure the proper documentation and disposition. They may also review other related Quality documentation, such as device history or calibration records. What You'll do as a Quality Inspector * Conducts incoming component and in-process product inspections to appropriate standards. * Identifies, segregates, and documents rejected components and materials. * Participates in a Material Review Board to review and process non-conformance reports. * Supports NC disposition activities such as re-inspection. * Enters and retrieves inspection and NC data from local and global systems. * Reviews related Quality documentation, such as DHRs or calibration records. * Supports local problem-solving activities and may identify opportunities for improvement. * Complete other duties as assigned. The Experience, Skills and Abilities Needed Required: * High School Diploma or GED. * 1 year of experience in mechanical inspection or other technical production tasks. Other: * Ability to work in a fast-paced environment with strict deadlines * Ability to generate detailed, high-quality documentation. * Ability to work with others in analyzing and solving technical problems. * Ability to perform/manage multiple tasks in parallel. * Teamwork: Collaborates with others. Works in a professional manner to support team actions. * Effectively manages work tasks while also being detail-oriented and striving for continuous improvement. * PC experience and working familiarity with common desktop applications, including Excel and Word. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Here is just a brief overview of what we offer: * Market Competitive Pay * Extensive Paid Time Off and (9) added holidays * Excellent Healthcare, Dental and Vision Benefits * Long/Short Term disability coverage * 401(k) with company match * Maternity & Paternal Leave * Additional add-on benefits/discounts for programs such as Pet Insurance * Tuition Reimbursement and continued educations programs * Excellent opportunities for advancement and stable long-term career Pay range for this opportunity is $39,312.50 - $48,562.50. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

Quality Inspector 1st Shift: 8am to 4:30pm Starting Rate: $25 to $30 hr 1st shift Quality Inspector for a full-service metal fabrication and manufacturing company located in Warrensville Heights, Ohio. Founded in 1988, the company features a 50,000 square foot facility and employs over 85 employees. ***Will be needing 3+ years experience within inspection of machined metal parts industry Duties -Will handle floor inspection and spot check parts to their blueprints -Prior experience with using mics, calipers, and gages -Must come inspection with machine metal parts

Job Description Now Hiring: Quality Inspector Manufacturing 2nd shift Pay: $17.50 - $20.00/hour - based on experience Schedule: Monday through Friday 3:00pm to 11:30pm Job Summary: As a Quality Inspector you'll play a critical role in ensuring that our precision-manufactured products meet the highest quality standards. We're looking for detail-driven professionals with a strong background in manufacturing inspections. Objectives: Ensure compliance with Company quality standards and QMS requirements Uphold the company mission and core values with professionalism and urgency Promote teamwork, ethics, and a respectful workplace Key Responsibilities: Perform in-process, first-piece, and final inspections of machined and washed parts Inspect cut-blanks, stamped/threaded nipples, and special orders Approve manufacturing setups and ensure products meet specs Use inspection tools (micrometers, calipers, indicators, etc.) Document inspection results and maintain traceability records Communicate with supervisors on any quality concerns or needed adjustments Inspect purchased products using defined measurements and criteria Support production metrics: accuracy, on-time delivery, and quality Maintain a safe and organized work environment Requirements: High school diploma, GED, or equivalent 3+ years' experience in manufacturing or inspecting precision machined parts Proficient in reading blueprints and GD&T Skilled in basic math and computer use Detail-oriented; able to identify fine surface flaws Strong communication and teamwork skills Excellent attendance and work habits Physical ability to: Stand/bend for full shifts Lift 50 lbs. continuously, 70 lbs. occasionally Push/pull carts up to 150 lbs. Move 12-24 ft lengths of pipe Willing to work overtime as needed Be part of a company that values quality, safety, and continuous improvement Opportunity to work with a professional team in a stable, growth-focused environment

Job Description We are looking for a person to inspect parts and assist with supervision of quality control activities on the first shift. This is a hands-on position. Responsibilities: The quality control inspector is responsible for reviewing current production parts to ensure that they meet customer requirements. The inspector works with the operators to inform them what acceptance standards are and notifies supervisors when a problem is found. The quality control inspector may at times rework parts before final shipments. Requirements: Manufacturing experience Some quality control inspection experience in a manufacturing environment. Some supervisory experience. Willingness to work in a foundry environment to do the required tasks. Preferred: Experience with handheld measurement tools such as calipers and dial indicators Experience with castings

The Quality Inspector evaluates statistical data to determine and maintain quality and reliability of products on a 2nd shift schedule. What You'll Do: Perform first article inspection which include detailed documentation using customer's forms. Work with minimal supervision using detailed procedures forms and manuals as a guide to job performance. In process auditing that will require the review of operator and process performance working to specifications as referred to in material routings. Use control plans, Material routing instructions, computer print outs, and Pareto charts. Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Records test data, applying statistical quality control procedures. What You'll Need: High school diploma or general education degree (GED) and 5 years related experience and/or training; or equivalent combination of education and experience.

Job Description SIGN-On Bonus - $1,500 Starting Rate $20.50 for 1st Shift, plus 10% Shift Premium for 3rd Shift ($22.55) Want to make a difference and enjoy a fast paced environment in a growing business? Join the SPIROL Team, celebrating more than 75 years of precision manufacturing to support the aerospace, capital goods, automotive and industrial markets. The Quality Technician supports the Quality Engineer and Manager in the development of new programs, and provides support to production personnel as assigned by the Quality Engineer or Manager in the form of capability studies, problem solving team involvement and Design of Experiments (DOE). RESPONSIBILITIES: Plays a main role in ensuring that the company's and customer's quality requirements are met on assigned products, area, and functions. Serves as the direct customer Quality contact for problem resolution (i.e. CAR contact). Provides guidance to and assists in identifying the root causes of problems and institution of corrective action while participating on Problem Solving Teams (8-D). Provide logical judgement of potential solutions to problems. Assists with SPC, Capability Study, Gage R&R, DOE, and Inspection analysis support for the operating units. Participates in the development of Process Flow Charts, Process FMEA's. Conducts internal audits as assigned. Serves as backup for the Quality staff. Provides guidance to the Quality staff in the absence of the Quality Engineer or Manager. Any other duties or special projects as assigned by the Quality Engineer or Manager. QUALIFICATIONS: Three (3) years quality or quality related experience in a manufacturing or laboratory environment. Excellent organization and interpersonal skills. Ability to communicate effectively (written and verbal) with all groups of people. Ability to prioritize and meet deadline. A common-sense approach to problem-solving and setting priorities. Have a working knowledge of problem solving techniques. Possess a working knowledge of the ISO Quality System standard. Advanced skills/knowledge of "Windows" based software programs. ASQ certification(s) preferred. Ability to lift 35 lbs. FULL TIME BENEFITS: Health/Dental/Vision Company fully paid Life, Short & Long Term Disability Competitive Compensation Immediate Paid Vacation 11 Paid Holidays PTO Education Assistance Program Employee Assistance Program Pet Insurance 401(k) with Company Matching Defined Contribution Plan - 3% Guaranteed 10% 3rd shift premium Careers Video Link: ******************************************* SPIROL an equal opportunity employer. SPIROL does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Job Posted by ApplicantPro

BWXT traces its history back to the 1850s with the invention of the water tube boiler. Operating for many years as a part of The Babcock & Wilcox Company, our company has long been at the forefront of the commercial nuclear power generation and government nuclear industries, achieving an impressive number of firsts in both businesses. In 2015, The Babcock & Wilcox Company spun off its power generation business to allow BWXT to focus on government and nuclear operations. Job Description BWX Technologies Inc. is looking for the ideal candidate to fulfill the role of Technologist 4 as part of their Nuclear Equipment Manufacturing organization. This role functions out of a regional group to manage, verify effectiveness and continuously improve the NDE training, qualification and oversight program. Additional duties include providing technical counsel and supporting sites and their suppliers in order to ensure the highest level of reliability and compliance. The position may develop and administer training and testing programs related to both commercial and military non-destructive testing specifications relative to the following methods: Radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. Qualifications Qualifications in at least four (4) of the following methods: radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. In addition, the demonstration of proficient knowledge in NAVSEA 250-1500-1, MIL-STD-2132 and ASME Section III through previous work experience is a preferred. Experience as a Level III or Examiner is preferred. The candidate must be currently certified or be capable of attaining certification within 6 months in at least four (4) of the methods listed above in accordance with NAVSEA 250-1500-1 and SNT-TC-1A. Additional Information All your information will be kept confidential according to EEO guidelines.

BWXT traces its history back to the 1850s with the invention of the water tube boiler. Operating for many years as a part of The Babcock & Wilcox Company, our company has long been at the forefront of the commercial nuclear power generation and government nuclear industries, achieving an impressive number of firsts in both businesses. In 2015, The Babcock & Wilcox Company spun off its power generation business to allow BWXT to focus on government and nuclear operations. Job Description BWX Technologies Inc. is looking for the ideal candidate to fulfill the role of Technologist 4 as part of their Nuclear Equipment Manufacturing organization. This role functions out of a regional group to manage, verify effectiveness and continuously improve the NDE training, qualification and oversight program. Additional duties include providing technical counsel and supporting sites and their suppliers in order to ensure the highest level of reliability and compliance. The position may develop and administer training and testing programs related to both commercial and military non-destructive testing specifications relative to the following methods: Radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. Qualifications Qualifications in at least four (4) of the following methods: radiography, magnetic particle, liquid penetrant, visual inspection and ultrasound. In addition, the demonstration of proficient knowledge in NAVSEA 250-1500-1, MIL-STD-2132 and ASME Section III through previous work experience is a preferred. Experience as a Level III or Examiner is preferred. The candidate must be currently certified or be capable of attaining certification within 6 months in at least four (4) of the methods listed above in accordance with NAVSEA 250-1500-1 and SNT-TC-1A. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description We are seeking an experienced Senior Quality Inspector to join our aerospace manufacturing team. This role is responsible for performing detailed incoming, in-process, and final inspections to ensure components and assemblies meet the highest industry standards. The ideal candidate has extensive experience working with extremely tight tolerances (as low as 0.0002”) and will play a key role in ensuring compliance with customer, company, and regulatory requirements. Key Responsibilities: Perform incoming, in-process, and final inspections of aerospace components and assemblies. Verify parts and assemblies against engineering drawings, specifications, and customer requirements with tolerances down to 0.0002” (2/10,000). Use a wide range of precision measuring instruments (micrometers, calipers, CMM, height gauges, optical comparators, etc.). Document and report inspection results, including nonconformances, in accordance with AS9100/ISO 9001 quality standards. Support root cause analysis and corrective/preventive action (RCCA/CAPA) activities. Assist with First Article Inspections (FAIs) in compliance with AS9102 requirements. Work closely with production, engineering, and quality teams to resolve quality issues. Mentor and provide guidance to junior inspectors and production staff on inspection best practices. Requirements: 5+ years of experience in quality inspection within the aerospace or precision manufacturing industry. Proven ability to work with tight tolerances (2/10,000”) and complex precision parts. Proficiency with precision measuring tools and equipment; CMM experience preferred. Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) and ability to interpret complex aerospace blueprints. Experience with FAIs (AS9102), inspection reports, and nonconformance documentation. Familiarity with AS9100 and ISO 9001 standards. Strong computer skills for inspection documentation and reporting (ERP/MRP/QMS experience a plus). Excellent attention to detail, analytical skills, and problem-solving ability. Must successfully pass a pre-employment eye exam to verify visual acuity required for precision inspection. Preferred Qualifications: Prior experience in a lead or senior inspector role. Knowledge of special processes (plating, coating, heat treat, etc.) inspection. Experience supporting customer audits and regulatory compliance.

A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Supervision: Essential Responsibilities Perform visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards. Program and operate electronic equipment such as microprocessor-based relays. Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc. Perform equipment failure investigations and root cause analysis. Complete and maintain all test Quality Control documentation as required. Perform maintenance on test equipment as needed. Perform tests using equipment such as multi meter, clamp-on-meter, voltage detector, Hi-Pot, etc. Interaction with all departments (shop, engineering, sales, shipping, fabrication, PCR, switchgear) including customers to work to resolve quality related issues. Interaction with all departments during production, final inspection and final release to shipping is required. External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers. Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems. Participates in continuous improvement projects. Promote a safety culture as well as attend all safety meetings. Ensure quality by following standard work instructions and identifying any potential risks to product quality. Ensure that work areas remain clean and well organized. Learn and understand basic electrical principals and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificate Minimum 1-3 years' experience in manufacturing environment. Ability to read prints including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferred Intermediate experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product. Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within a team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required. Working at a desk and computer in an office environment is required. Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

Lingo Staffing is Now Hiring for a Quality Control Inspector in Hartville, OH Hours: 1st Shift: 7:30am- 4pm ($15) 2nd Shift: 3:30pm-12:00am ($16/hr) Days: Monday-Friday Pay: $15/hr (1st shift) • $16/hr (2nd shift) Short Description: We are seeking reliable and detail-oriented Quality Control Inspectors for a fast-paced plastics manufacturing environment in Hartville, OH. QC Inspectors are responsible for performing first-piece inspections, monitoring in-process quality, completing documentation, auditing packaging, identifying defects, and ensuring all production meets LMT's established quality standards. Candidates must be comfortable working independently, communicating across shifts, and maintaining accuracy throughout the shift. Requirements: Minimum 1 year experience in manufacturing or similar environment (plastics preferred) High school diploma or GED Ability to inspect parts visually and identify defects (splay, burns, shorts, contamination, flash, etc.) Ability to complete inspection paperwork, production sheets, and documentation accurately Able to use scales, gauges, check fixtures, and basic testing tools Ability to read, compare, and verify first-piece samples Strong attention to detail and accuracy Ability to follow written and verbal instructions Good communication skills; able to communicate across shifts Must be dependable and able to work with minimal supervision Must be willing to comply with a national background check ? Physical Requirements: This position requires the ability to walk extended distances (approximately 2.5+ miles per day) and remain on your feet for the entire shift. Employees must be able to bend, twist, stand, stoop, and lift as part of daily duties, with or without reasonable accommodation. We Are Seeking Candidates Who Have Held the Job Titles of: Quality Inspector, Quality Assurance Technician, Manufacturing Inspector, Production Inspector, or Assembly Quality Checker #INDAKR

Nearly 40 years and still growing, this progressive, high-quality custom welding, fabrication, and maintenance solutions industry leader is looking for an autonomous self-thinking Quality Control Inspector with a desire to get better every day through technical and team driven solutions [Duties ] Dimensionally/visually inspect fabrications/welds for fitment and completion to drawing requirements. Interpret and apply blueprint drawing requirements with strong attention for details Visually inspect (VT) welds and fitments & Penetrant inspect (PT) welds. (As needed) [Requirements ] Prior role in Quality Department for structural welding and fabrication services. Ability to read and interpret blueprints Quality Inspection experience with weld quality, measurements, specifications, surface quality, paint, and coatings quality [Details ] $22 - $25 an hour + benefits (health insurance, retirement plan, and paid vacations/holidays) Full time permanent career opportunity Monday - Friday, 7am-3:30pm (Overtime required when necessary) To apply for this fabulous opportunity, send your resume to ****************** OR call ************ and ask for DaWayne for more info.

Dyson Corporation headquartered in Painesville, OH is seeking a quality control professional for reviewing and testing materials, components, and finished products to ensure they meet specifications and quality standards using various tools like calipers, gauges, and micrometers. The quality department performs inspections on materials and products, monitoring production processes, documenting issues and corrective actions, ensuring compliance with standards, and collaborating with various teams to resolve problems. PRINCIPAL DUTIES AND RESPONSIBILITIES: Inspect in-process and finished products using micrometers, calipers, gauges, and other precision tools. Review and maintain quality records for accuracy and completeness. Interpret blueprints and work orders to verify product specifications. Document nonconforming materials and support corrective actions. Collaborate with production and engineering teams to resolve quality issues. Maintain a clean and organized work area. Meet production goals and perform additional duties as assigned. REQUIREMENTS: High School Diploma or GED required. 1-3 years of quality control experience in a manufacturing setting. Proficient in using inspection tools: micrometers, calipers, thread & pin gauges, surface plates, and height gauges. Ability to read and interpret technical documents and blueprints. Strong communication skills and a team-oriented mindset. PHYSICAL REQUIREMENTS: Ability to work on the shop floor for extended periods. Must be able to lift up to 50 lbs. Strong visual acuity is essential. Dyson Corporation is a leading manufacturer of large diameter fasteners and forgings, proudly headquartered in Painesville, Ohio. With over 130 years of industry expertise, we are committed to precision, quality, and innovation. Join a team where craftsmanship meets opportunity. What We Offer Career Growth: Opportunities to advance within the Quality, Production, or Engineering departments. Training & Development: On-the-job training and mentorship to support your professional growth. Team Culture: Work with experienced professionals in a collaborative and supportive environment. Stability: Be part of a company with a long-standing reputation for excellence. Dyson Corporation offers a competitive pay range and industry leading benefits while also being committed to working with and providing reasonable accommodation to individuals with disabilities. Dyson Corporation is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 25667 Summary Lincoln Electric is seeking a Quality Assurance Technician for our Euclid, Ohio headquarters operation. The Quality Assurance Technician plays a key role in conducting scheduled Internal Quality Audits to determine if the internal quality system is effective. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do The QA Technician will support various functions and activities to include covering internal ISO audits as well as other external bodies such as NIOSH. In addition, you will: • Plan and conduct internal ISO9001 Quality Audits according to schedule; work closely with all departments inclusive of ISO9001 • Use audit guidelines, checklists and prior audit results to determine audit paths • Gather and document objective evidence during audit interview process; determine whether quality activities comply with specifications, procedures, and standards • Record and document audit results in the company's online audit system and review the results of the audit with the Department Manager of the area being audited. • Complete corrective action determinations including associated risk assessments • Draft corrective actions and action items in a clear and compelling way for use by others • Conduct verifications of corrective actions and action items including verification using objective evidence • Guide, support and answer third party quality audits and surveys including all required correspondence • Perform work center, finished product and process audits, as required • Review, understand, and follow the departmental procedures, Work Instructions Specifications and Plant Rules and Regulations that are associated with the performance of this job • Perform other duties as assigned by the Quality Assurance Manager • Promote an atmosphere of continuous process and employee improvement. Education & Experience Requirements • Technician III: Vocational training and 5+ years of experience in a relevant work environment is required; OR high school diploma/GED with 7+ years experience in a relevant work environment. • Technician IV: Vocational training and 8+ years of experience in a relevant work environment is required; OR high school diploma/GED with 10+ years' experience in a relevant work environment. • Additional training and or knowledge in the quality auditor field and procedures is desirable • Computer skills in MS Office and Windows operating system. • Experience in developing and maintaining records and to follow projects through to conclusion • Ability to obtain ISO 9001 Auditor Certification • Ability to review and evaluate specifications, procedures, and processes • Ability to communicate effectively and cross-functionally in production, support and corporate areas on a regular basis. • Self-motivated and exhibit the ability to work with minimal supervision • Must understand the Quality Policy and how it relates to this job • Must understand the relevance and importance of the quality activities and how they contribute to the achievement of the quality objectives. • Capable of frequent standing and walking and lifting up to 60 lbs • Must have excellent attendance, safety and work record Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Job Title: Precision Parts InspectorHours & Location: Schedule: Monday through Friday, 7:00 AM - 3:30 PM Pay & Benefits: Starting Pay: $27.00-$29.00/hr, based on experience Contract-to-Hire: Raise upon direct hire, with additional increases at 1-year and 2-year marks Comprehensive Benefits after Hire: Low-deductible medical coverage Free dental and vision insurance 401(k) with company match Paid holidays and vacation Life insurance Christmas bonuses and employee appreciation lunches Job Responsibilities: Inspect precision-machined components to ensure compliance with technical drawings and customer specifications Use micrometers, calipers, height gauges, and other measuring tools Conduct and document First Article Inspections Identify defects and collaborate with manufacturing teams to resolve issues Maintain and verify calibration of inspection equipment Work closely with Quality Assurance and Engineering to refine inspection processes Lift up to 50 lbs as needed Required Qualifications: 4+ years of experience in a manufacturing inspection role Strong blueprint and schematic reading skills Familiarity with various measurement tools and inspection techniques Solid math and communication skills Ability to multitask, stand for extended periods, and work overtime when needed Must be fluent in English (spoken and written) Pre-employment 5-panel drug screen and background check required Work Environment & Culture: This is a clean, air-conditioned, and highly organized 45,000 sq. ft. facility that specializes in precision CNC plasma and waterjet cutting machinery. The company has a strong legacy, now in its fourth generation of family ownership. You'll be joining a team that values long-term careers, offers stable employment, and treats every employee like family.

Job Description The Quality Inspector evaluates statistical data to determine and maintain quality and reliability of products on a 2nd shift schedule. What You'll Do: Perform first article inspection which include detailed documentation using customer's forms. Work with minimal supervision using detailed procedures forms and manuals as a guide to job performance. In process auditing that will require the review of operator and process performance working to specifications as referred to in material routings. Use control plans, Material routing instructions, computer print outs, and Pareto charts. Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics Records test data, applying statistical quality control procedures. What You'll Need: High school diploma or general education degree (GED) and 5 years related experience and/or training; or equivalent combination of education and experience.