Quality inspector jobs in Grand Prairie, TX

We are currently seeking a Sequencing Inspector Team Members for the 1st shift(6am-2pm) at our Arlington, TX facility. (1 position available) Our Sequencing Inspector Team Members are key components of our organization. Team Members are expected to inspect all parts before parts are shipped to GM. Team Members must maintain a safe and clean work environment by complying with procedures, rules, and regulations. General Job Duties: Perform receiving inspection activities on supplier parts. Document and file results of receiving inspection activities. Create and manage Quality Notices (complaints) for suppliers. Generate supplier scrap reports and debit memos. Prepare Return to Vendor (RTV) memos. Track and document cost recovery trends. Organize and file rejection, scrap, and cost recovery information. Support manufacturing departments with containment and inspection of supplier parts. Adhere to all safety protocols, including LOTO and PPE requirements. Identify and address quality issues effectively. Demonstrate strong problem-solving skills and prioritize tasks to meet customer requirements. Exhibit teamwork skills and actively participate in a positive work environment. Contribute to continuous improvement initiatives and lean manufacturing efforts. Assist operations in achieving daily production goals and departmental objectives. Conduct daily process audits based on product audit schedules and requirements. Create Quality Alerts and ensure proper communication flow. Participate in containment activities. Work overtime as needed in accordance with company policy. Perform all assigned tasks according to SOPs, safety alerts, and quality alerts. Other duties as assigned. Education Requirements High school diploma or GED. IAC Perks: 401(k) Health, Dental and Vision Insurance Paid time off Company events Employee Assistance Program (EAP) Career growth opportunities Looking for a next-level career? Apply today!

Job Description Key Responsibilities: Inspect incoming and outgoing shipments. Perform visual and sensory inspections (color, texture, smell) of fresh produce upon arrival, during storage, and after dispatch. Verify compliance with internal specifications and sanitary regulations. Monitor storage conditions (temperature, ventilation, humidity). Record non-conformities and coordinate corrective actions with logistics, purchasing, or production teams. Prepare daily/weekly quality reports. Document inspection results and input data into warehouse or quality management systems. Maintain accurate logs for temperature checks, inspection reports, and non-conformance issues. Monitor inventory rotation (FIFO) for all perishable categories. Coordinate with warehouse, procurement, and transportation teams to resolve quality concerns quickly. Assist with shelf-life evaluations, product sampling, and QA audits. Manage product returns or rejections that do not meet quality standards. Support staff training in proper handling and quality control practices. Requirements: High school diploma or equivalent. Previous experience in quality control, ideally with perishable or food products. Knowledge of hygiene and food safety standards. Ability to identify product defects, ripeness stages, and quality indicators across different perishables. Attention to detail, responsibility, and ability to work under pressure. Basic knowledge of utilizing a PC and Microsoft Office Suite Capable of lifting 50 lbs and standing for long periods. Preferred Skills: Familiarity with quality control tools and management software. Strong communication and teamwork skills.

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: * Assists Operations Managers with production flow, and planning. * Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. * Eliminates ordinary difficulties encountered in regular job assignments. * Demonstrates and encourages a team environment and works with team members to resolve conflicts. * Instructs other employees in the proper method and procedures of performing jobs when required. * Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. * Generates measures of performance (MOP's) and assists with analysis and development of actions. * Provides support and guidance to production team and able to troubleshoot issues/problems. * Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. * Provides performance evaluation input to the Operations Managers for inspection team members. * Recognizes and understands flight/product safety critical parts and processes. * Responsible for immediately reporting any flight/product safety concerns. * Participates in pro-active risk analysis of flight/product safety critical parts and processes. * Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. * Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. * Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. * Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. * Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: * Minimum 5 years of experience. * Qualified in the detail and/or quality inspection functions. * Knowledgeable in the configuration and assembly of the products processed in the cells. * Knowledgeable in the assembly methods and techniques used. * Proficient in the use of precision measuring instruments. * Proficient in dimensional inspection techniques. * Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. * Knowledgeable on the documentation completion requirements. * Knowledgeable in the quality requirements relating to the production process. * Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. * Proficient in communication skills. * Ability to guide and train other levels of technicians. * Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. * Must be able to read and interpret technical manuals, instructions, blueprints and drawings. * Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. * Must have an understanding and working knowledge of hazardous material handling and disposal. * Strong planning, organizational, analytical, interpersonal, oral and written communication skills. * Must have demonstrated ability to use good judgment and make sound decisions. * Must be authorized to work in the U.S. Preferred Characteristics: * Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. * Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. * Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. * Working knowledge of production management computer system and other related internal control systems. * Regularly required to sit for prolonged periods. Benefits that make life better: * Comprehensive Healthcare * 401(k) with 100% company match; up to 5% vested * Paid Time Off starting on day one * Bonus opportunities * Health- & Dependent Care Flexible Spending Accounts * Short- & Long-Term Disability * Life & AD&D Insurance * Learning & Training opportunities #LI-GH1

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$28 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job DescriptionJob Title: Quality Control Inspector About the Role HumCap's client in electronic component manufacturing is seeking a highly experienced Quality Control Inspector to join our team. The ideal candidate will have a strong background in electronics manufacturing and quality assurance, with expertise in industry standards and hands-on technical skills. Key Responsibilities Perform First Article Inspections (FAIs) and visual inspections on PCB assemblies and components. Review schematics, fabrication, assembly drawings, and Gerber files for compliance. Conduct statistical process control (SPC) and analyze KPIs to ensure quality performance. Program, debug, and repair Pick & Place machines, AOI systems (Automated optical inspection), and optimize X-ray and SPI equipment. (Serial Peripheral Interface) Ensure compliance with ISO9001, ISO 13485, AS9100, and ITAR regulations. Collaborate with cross-functional teams and maintain a team-oriented approach. Interface confidently with customers to address quality concerns and provide solutions. Required Qualifications Education: High School Diploma required; BS degree preferred. Candidates with 15+ years of experience will be considered in lieu of a degree. Experience: 10-15 years in electronics manufacturing quality control. Certifications: IPC-610 required; IPC Trainer certification is a plus. Technical Skills: Proficient in Microsoft Office and familiar with Artificial Intelligence tools. Ability to read and interpret component-level drawings, schematics, and assembly documentation. Strong knowledge of PCB components, SMT processing, and soldering techniques. Equipment Expertise: Must have experience programming and repairing Pick & Place, AOI, and X-ray/SPI systems. Soft Skills: Fluent in English. Strong analytical skills and attention to detail. Quality-oriented mindset. Excellent communication and customer-facing skills. Preferred Skills Experience with Gerber review and optimization. Familiarity with ITAR compliance and aerospace/medical device standards.

Job Title: Quality Control Inspector About the Role HumCap's client in electronic component manufacturing is seeking a highly experienced Quality Control Inspector to join our team. The ideal candidate will have a strong background in electronics manufacturing and quality assurance, with expertise in industry standards and hands-on technical skills. Key Responsibilities Perform First Article Inspections (FAIs) and visual inspections on PCB assemblies and components. Review schematics, fabrication, assembly drawings, and Gerber files for compliance. Conduct statistical process control (SPC) and analyze KPIs to ensure quality performance. Program, debug, and repair Pick & Place machines, AOI systems (Automated optical inspection), and optimize X-ray and SPI equipment. (Serial Peripheral Interface) Ensure compliance with ISO9001, ISO 13485, AS9100, and ITAR regulations. Collaborate with cross-functional teams and maintain a team-oriented approach. Interface confidently with customers to address quality concerns and provide solutions. Required Qualifications Education: High School Diploma required;BS degree preferred. Candidates with 15+ years of experience will be considered in lieu of a degree. Experience: 10-15 years in electronics manufacturing quality control. Certifications: IPC-610 required;IPC Trainer certification is a plus. Technical Skills: Proficient in Microsoft Office and familiar with Artificial Intelligence tools. Ability to read and interpret component-level drawings, schematics, and assembly documentation. Strong knowledge of PCB components, SMT processing, and soldering techniques. Equipment Expertise: Must have experience programming and repairing Pick & Place, AOI, and X-ray/SPI systems. Soft Skills: Fluent in English. Strong analytical skills and attention to detail. Quality-oriented mindset. Excellent communication and customer-facing skills. Preferred Skills Experience with Gerber review and optimization. Familiarity with ITAR compliance and aerospace/medical device standards.

About Us: Miller CAT is a leading provider of advanced vehicle anti-theft devices (Cat Shield) and CARB Compliant Catalytic Converters. As an ISO-certified manufacturer, we pride ourselves on our commitment to excellence and innovation in everything we do. Our customers range from OEM manufacturers, distributors, shops, to everyday consumers. We take extreme pride in our work and promote a healthy work life balance. We are located in Northeast Dallas, in a state of the art 70,000 square foot facility with multiple new Amada CNC Laser and Punch machines, new Amada Press Brakes, CNC spinning machines, automated deburring, laser etching machines, tube bending and multiple welding stations. As we continue to grow, we are seeking a diligent and detail-oriented individual to join our quality team. Job Description:As a Quality Inspector at Miller Cat, you will play a critical role in ensuring that our products meet the highest standards of quality and precision. You will be responsible for conducting thorough inspections and tests at various stages of the manufacturing process to identify any defects or deviations from specifications. Your keen attention to detail and ability to analyze data will be essential in maintaining our reputation for excellence in product quality. Key Responsibilities: Perform quality control (QC) inspections at first article, in process and final production stages of raw materials, components, and finished good products to ensure adherence to our quality standards. Utilize precision measuring tools and equipment to verify product dimensions, specifications per blue print and component routing documentation. Document and report any non-conformities, quality issues, and collaborate with relevant teams to implement corrective actions and root cause analysis. Assist in the development and implementation of quality control procedures and protocols. Provide training and support to production personnel on quality-related matters. Requirements: High School Diploma or GED required. Minimum 3+ years of experience working in QC and inspection processes within a manufacturing environment, preferably in industries where precision and accuracy are critical. Experience with sheet metal inspection is a plus! Proficiency in using measuring instruments such as calipers, micrometers, height gauges, surface plates, thread gauges, gauge pins, digital protractors, knowledge of GD&T and blue print reading. Strong analytical skills with the ability to interpret technical drawings and specifications. Excellent attention to detail and a commitment to upholding quality standards. Effective communication and interpersonal skills, with the ability to work collaboratively in a team environment. Familiarity with ISO9001 and other quality management systems is a major plus! Join Our Team: If you are passionate about quality, precision and thrive in a fast-paced manufacturing environment, we want to hear from you! Miller Cat offers competitive compensation as well as opportunities for professional development and growth. Join us in our mission to deliver excellence in every product we produce. Benefits: 401(k). Dental insurance. Health insurance. Life insurance. Paid Vacation. Vision insurance. About Miller CAT Corp Miller CAT is a family-owned business that has over 30 years in the exhaust business. We manufacture aftermarket catalytic converters that meet the CARB standards and are the largest catalytic converter protection device manufacturer in the country. We started our operations in California for the past 30 years and have recently relocated our facilities to Dallas, TX, to better serve the entire country and be closer to our core customers. Miller CAT is all about metal fabrication. Whether it is sheet metal manufacturing, tube bending, welding, etc, we do metal. Right now we are leading and revolutionizing how owners and OEMs can protect their vehicles from converter theft. Join us as we continue to make new and exciting products!

#ChangeMakers Ready to make an impact? We develop, manufacture, and supply dental implants, clear aligners, instruments, CADCAM prosthetics and biomaterials for use in esthetic dentistry, tooth replacement and restoration solutions or to prevent tooth loss. We empower our employees to perform and make an impact, to question the status quo, to drive change, to stay ahead of the competition. From the first Dental Implant in 1974 to the latest Digital Solution - we do things differently than others We deliver innovation based on evidence. This is part of our employer culture as well as an exceptional team spirit that truly encourages diversity and a powerful "can-do" attitude. #WeChangeDentistry every day. Be part of it. Position Summary: The operator is responsible for checking all batches during incoming inspection, in process, and before delivery to outbound any non-conformities according to the product specification and control plan. Essential Functions and Duties: This position is responsible for performing incoming inspection, quality control in process production, final inspection, and not limited to the following: * Access SAP system to obtain the material and production information for incoming inspection * Select and evaluate samples of materials, semi-finished products, or products from each batch * Perform required inspections to ensure the material and products conform to the approved specification and control plan in SAP * Disposition the material and product (pass/fail) according to the approved specification and control plan * Records inspection results in SAP system * Perform final disposition batches to distribution. * Review and complete the final Device History Records according to Good Documentation Practices * Handling the non-conforming material, product, as per the approved work instructions * Participate, when necessary, in quality, production, process or development activities * Keep the information and documents of the processes updated, controlled and archived, through electronic or physical means, when applicable. * Provide technical advice to its internal clients on matters in its area of expertise. * Keep up to date with the concepts, techniques, tools, methodologies and trends of the subjects related to their area of expertise. * Analyze problems that have occurred, proposing and implementing solutions that ensure the continuity of the work. * Support the development of various reports, aiming to support technical and managerial decision-making. * Record the tasks performed, including time notes, in the software adopted by the company. * Propose improvements in processes. * Analyze proposals and develop process improvements; * Implement procedures, methodologies, standards and policies, as well as solutions for matters related to its area of operation; * Comply with all medical device regulation requirements, internal and general, and human resources policies of Straumann Manufacturing, Inc. * Other duties as assigned by the management. Quality Management * Comply with and maintain the commitment to the Quality Policy * Adherent to all company policies, work rules, and the Straumann Code of Conduct, including Ethics. * Ensure the environmental conditions at the workstation are in accordance with the definitions and requirements for organization, cleaning, equipment, and operating instructions. * Follow procedures and complete documentation * Perform job duties in compliance with work instructions. * Apply a disciplined approach to ensuring conformance to medical device regulations, and clean and maintain production equipment standards. Work Environment/Physical Attributes * Maintain a clean and safe work area. * Comply with the Medical Devices Good Manufacturing Practices * Ensures safety of manufacturing processes to protect employees from work-related harm (zero-accident mentality). * The noise level in the work environment is consistently moderate * The employee will work in a fast-paced, team-oriented environment * Standing for long periods and occasional lifting of up to 35 lbs. Minimum Qualifications: * Completed High School Diploma or equivalent required. * Minimum 3+ years of experience working in quality control processes. * Basic understanding of the manufacturing requirements in regulated environments. * Basic understanding of Good Documentation Practices (GDP) * Able to interact with a computer-managed workflow. * Proficient in computer skills, including Microsoft Outlook, Word, and Basic Excel. Preferred Qualifications: * Basic knowledge of SAP or ERP system * Basic understanding of medical devices or dental implant products. * Basic knowledge of Machining * Knowledge of Quality Tools, including sampling plan, Measuring Instruments * Basic knowledge of FDA regulation, ISO 13485:2016 requirement, Health Canada and MDD/MDR requirements * Ability to work with small, high-quality parts, critical analysis, and attention to detail. * Able to communicate and collaborate effectively. Key Attributes Straumann Group has been inspired to make people's lives better, improve oral health and restore people's self-esteem and driving the company's purpose to unlock the potential of people's lives. Culture has always been the foundation of our success, guided by our beliefs: customer obsession, entrepreneurial mindset, agility & decisiveness, ownership, passion for learning, psychological safety, and driving engagement. Additional qualities of the successful candidate include the following: * Resourceful and Hands-on: An energetic, resourceful, agile, and hands-on executive who operates effectively with minimum direction and pursues objectives and works to deliver against goals relentlessly; able to get to the heart of issues rapidly and act decisively. * Team Player: Fosters team-first mentality and shares wins and successes; creates an open and transparent environment in which individuals can work together to drive optimal outcomes. * Results-driven: Accountable to meet or exceed commitments on time, has a genuine passion for ensuring quality and patient outcomes. * Collaborative Relationship-builder: Able to build deep relationships with key internal and external stakeholders, work respectfully with other teams. * Integrity: Possesses unquestionable integrity and is intellectually curious; is known as an honest, trustworthy, ethical, and straightforward individual, capable of presenting the unvarnished truth in an appropriate and helpful manner. Straumann Group prides itself on employee's embracing the player/learner mindset that embodies a high-performance culture and learning organization All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Employment Type: Full Time Alternative Locations: United States : Mansfield (TX) Travel Percentage: 0% Requisition ID: 19268

Job DescriptionPay $14 per Hour The Quality Inspector is responsible for the auditing and testing of equipment being repaired at a bench level. This position ensures that repaired product passes inspection at the bench level. The Quality Inspector will interface with Line Management to alert them to any deficiencies and document accordingly. ***Shift Timing*** 6am - 2:30pm M-F Roles & Responsibilities · Identifies process and product improvements. · Perform qualification tests on workbench. · Perform Product Inspection Activities. · Perform quality audits on in-process and final product. · Perform basic electrical test. · Interface with installers and section heads. · Able to track or document inspection results. · Maintains satisfactory quality performance levels. · Documents cited product deficiencies. · Conforms to all aspects of Quality Assurance Manual. · Maintain a clean, organized work area. Minimum Qualifications Required Skills: · Good manual and eyesight dexterity. · Good documentation up-keeping practices. · Knowledge of basic electronics and quality assurance practices. · Ability to test equipment and read test results. · Excellent attention to detail. Required Skills electronics quality Work Authorization Green Card US Citizen

Job Description The Quality Control Inspector is experienced in fiber construction. They are responsible for conducting quality assurance inspections of underground and aerial work of in-house technicians and subcontractors, during and after completion of a project. ESSENTIAL JOB FUNCTIONS Ensures adherence to and demonstrates a sound understanding of safety best practices and regulations Coordinate inspection activities with crews, subcontractors, safety, and field management Understands the scope of work of each project Conducts quality assurance inspections during and after completion of work to ensure compliance with customer specific requirements Recognizes and escalates persistent quality or other observed issues that could impact the ongoing relationship between client and company. Utilizes and demonstrates proficiency with construction tasks, tools, test equipment and information that will enhance quality results. Enter inspection findings in established company database in accordance with policy and procedures. Communicate project status and any work/schedule changes with subcontractors, local municipalities, and homeowners Assist in the preparation of red line prints and as-builds Monitor and track completion of job sites Other duties as assigned SKILLS AND ABILITIES Understands aerial, underground, and splice test variants Knowledge of aerial and underground cable/fiber construction practices Ability to read and interpret CATV/Fiber design prints Knowledge of splicing Ability to manage workload in an effective and efficient manner Knowledge of local DOT work zone standards. Conflict resolution skills Utilizes their experience to mentor and educate crew members Computer experience in Microsoft Office Suite and with various other construction programs Excellent at relationship building Ability to communication with clarity at the frequencies required by management and customers Ability to travel to multiple sites as required Work independently with minimal supervision MINIMUM REQUIREMENTS 10 plus years in construction with at least 5 years in a leadership role Valid driver's license and excellent driving record Must be able to pass a pre-employment drug test Must be able to pass a DOT physical High School Diploma or GED PREFERRED REQUIREMENTS Permitting Experience Bi-lingual (Spanish/English) Undergraduate degree CDL License

The Quality Control Inspector is responsible for all inspections performed to ensure compliance to approved data, Federal Aviation Regulations, the RSQCM, and/or data acceptable to the administrator. This is an experienced-level position with no supervisory responsibilities that reports to the Chief Inspector. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Ensures that no defective, unserviceable or un-airworthy parts are used on any components or articles released by Aspire. Ensures all fabricated parts are labeled and identified properly. Inspects work performed to ensure compliance. Performs receiving inspection functions as authorized and prescribed in the RSQCM. Accomplishes all necessary inspections of articles maintained by the repair station to ensure overall quality of workmanship and material used in the fabrication process. Notifies the Quality Control Supervisory Personnel in a timely manner of any quality concerns and items related to airworthiness that are not resolved through the normal course of the day; These items may be communicated by email, voice mail or documented in the Shift Turnover Log. Quality Control Inspectors will ensure that quality concerns and items related to airworthiness are addressed and tracked until resolution. Coordinates with the Inspection Supervisory Personnel to determine daily priorities of required inspection items. Demonstrates a thorough familiarity with all applicable FARs, company, and customer manuals applicable to their work assignments. Demonstrates a thorough familiarity with all necessary tooling, inspection aids and techniques to accomplish assigned tasks. Ensures all maintenance and alterations that are performed by the repair station are in compliance to the applicable technical data. When Aspire MRO requires working multiple shift operations Aspire MRO supervisory personnel shall ensure the Shift Turnover Report (PD-Form-3) clearly communicates any pertinent information and maintain communication and continuity from shift to shift. Ensures that the turnovers are completed post shift (all Shifts) and filed daily. Other duties as assigned. REQUIRED QUALIFICATIONS : High School Diploma or equivalent. Airframe & Power Plant license 5+ years of related heavy maintenance experience on commercial aircraft (B737, B757, B757, B777, A330, etc.). PREFERRED QUALIFICATIONS: FAR 145 Quality Control Maintenance knowledge or experience. SUCCESS FACTORS/JOB COMPETENCIES : Good understanding of Quality requirements, inventory control. Good knowledge of FAA regulations. Understanding of Company operations. Able to organize, coordinate, and direct team activities. Strong problem-solving skills. Good Communication skills. Able to use all related maintenance equipment and computer applications. Must be able to understand, read, write, and speak Standard English, including technical, aircraft and quality control-related vocabulary, for technical and general business correspondence and for producing work products. Must be able to adhere to all established safety policies, processes, and procedures. WORK ENVIRONMENT: This job operates in indoor and, occasionally, outdoor settings. The indoor settings include office and warehouse/airplane hangar environments which require the use of standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines and safety gear. The outdoor settings include airplane runways and parking lots. The noise level in the work environment is occasionally loud. Occasionally subject to varying inside and/or outside temperatures, which may include extreme heat (temperatures above 100 degrees) or extreme cold (temperatures below 32 degrees). While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand. The employee frequently is required to use the fingers to make small movements such as typing, picking up small objects, or pinching fingers together. This would also occasionally require the ability to walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. Exerts up to 50 lbs. regularly, and/or up to 20 lbs. frequently. Occasionally lifts up to 100 lbs with assistance. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. TRAVEL: Travel may occasionally be required for this position (10% or less). WORK AUTHORIZATION/SECURITY CLEARANCE: Must be able to legally work in the US without sponsorship. Must be able to pass a post offer DOT drug test upon hire. EQUAL EMPLOYMENT OPPORTUNITY AND AFFIRMATIVE ACTION PLAN: Aspire MRO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Aspire will also take affirmative action as called for by applicable laws and Executive Orders to ensure that minority group individuals, females, disabled veterans, recently separated veterans, other protected veterans, Armed Forces service medal veterans, and qualified disabled persons are introduced into our workforce and considered for promotional opportunities.

Job Description ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's OJT module. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive they are examples only and may be amended or added to as needed by the organization. * Inspect and verify proper completion and documentation of aircraft maintenance events and discrepancies, to include alterations and repairs, serviceable and unserviceable tags. * Verify currency and applicability of maintenance manuals, inspection guides, ICA's, AD's, Service Bulletins, drawings, engineering data, on-board aircraft operation manuals, aircraft registration and airworthiness certificates. * Brief aircrew of inspections, repairs, and open discrepancies prior to maintenance check flights. * Inspect and verify proper completion and documentation of engine maintenance events to include inspections, repairs, and overhauls. * Prepare maintenance, inspection, repair, and alteration documents to include aircraft and engine maintenance entries, FAA Form 8130-3, and FAA Form 337. * Perform fixed wing aircraft engine leak and operational checks to include aircraft taxi. * Perform receiving inspections of incoming parts and components and verify accompanying documentation. * Enter inspection findings into database to determine trending issues. * Must be familiar with all FAR's required to operate an FAA Repair Station. * Ensure safety requirements are paramount within the Repair Station operations. * Participate in general housekeeping and FOD control activities as required. * Able to work any assigned shift or schedule outside normal duty hours and travel as required. * Performs other duties as required. MINIMUM QUALIFICATIONS: The following minimum qualifications have been identified by subject matter experts (SMEs) who have supervised this position or functioned in the position; they are based on job analysis information supplied by these SMEs. However, if a candidate believes he/she is qualified for the job although he/she does not have the minimum qualifications set forth below, he/she may request special consideration through substitution of related education and experience, demonstrating the ability to perform the essential functions of the position. Any request to substitute related education or experience for minimum qualifications must be addressed to the Human Resource Department in writing, identifying the related education and experience which demonstrates the candidate's ability to perform all essential functions of the position. If a candidate believes he/she needs a reasonable accommodation to meet these minimum qualifications or, if called for an interview, to attend such an interview, the candidate must notify the Human Resource Department in writing of the need for the accommodation and identify the specific accommodation requested. KNOWLEDGES, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following skills and abilities are required: * Must hold a valid certificate issued by the FAA with both Airframe and Power Plant ratings with an Inspection Authorization (IA). * Must possess a thorough knowledge of aircraft maintenance. * Shall have a minimum of five (5) years experience in a quality control program at the level of making airworthiness decisions. * Must have the ability to communicate clearly and concisely, both verbally and in writing. * Must hold and maintain in force a valid driver's license. * Must be familiar on the type of customer's designated aircraft for which he/she has responsibility, with formal training preferred. * Must be computer literate. * Both fixed and rotary wing, reciprocating and turbine engine experience is desired. * Pentagon 2000 SQL and/or IBM Maximo experience is desired. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 40 pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Normal day-to-day working conditions are inside an environmentally controlled shop. Work may be required in an aircraft hangar with good ventilation and airflow. Work may be required in outside weather conditions where employees will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, or airborne particles, and the risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exists. The employee is occasionally exposed to highly precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. V2X is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Professionalism, Integrity, and Respect. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. Employee benefits include the following: * Healthcare coverage * Life insurance, AD&D, and disability benefits * Retirement plan * Wellness programs * Paid time off, including holidays * Learning and Development resources * Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

Job Description The Quality Control Inspector is responsible for all inspections performed to ensure compliance to approved data, Federal Aviation Regulations, the RSQCM, and/or data acceptable to the administrator. This is an experienced-level position with no supervisory responsibilities that reports to the Chief Inspector. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Ensures that no defective, unserviceable or un-airworthy parts are used on any components or articles released by Aspire. Ensures all fabricated parts are labeled and identified properly. Inspects work performed to ensure compliance. Performs receiving inspection functions as authorized and prescribed in the RSQCM. Accomplishes all necessary inspections of articles maintained by the repair station to ensure overall quality of workmanship and material used in the fabrication process. Notifies the Quality Control Supervisory Personnel in a timely manner of any quality concerns and items related to airworthiness that are not resolved through the normal course of the day; These items may be communicated by email, voice mail or documented in the Shift Turnover Log. Quality Control Inspectors will ensure that quality concerns and items related to airworthiness are addressed and tracked until resolution. Coordinates with the Inspection Supervisory Personnel to determine daily priorities of required inspection items. Demonstrates a thorough familiarity with all applicable FARs, company, and customer manuals applicable to their work assignments. Demonstrates a thorough familiarity with all necessary tooling, inspection aids and techniques to accomplish assigned tasks. Ensures all maintenance and alterations that are performed by the repair station are in compliance to the applicable technical data. When Aspire MRO requires working multiple shift operations Aspire MRO supervisory personnel shall ensure the Shift Turnover Report (PD-Form-3) clearly communicates any pertinent information and maintain communication and continuity from shift to shift. Ensures that the turnovers are completed post shift (all Shifts) and filed daily. Other duties as assigned. REQUIRED QUALIFICATIONS: High School Diploma or equivalent. Airframe & Power Plant license 5+ years of related heavy maintenance experience on commercial aircraft (B737, B757, B757, B777, A330, etc.). PREFERRED QUALIFICATIONS: FAR 145 Quality Control Maintenance knowledge or experience. SUCCESS FACTORS/JOB COMPETENCIES: Good understanding of Quality requirements, inventory control. Good knowledge of FAA regulations. Understanding of Company operations. Able to organize, coordinate, and direct team activities. Strong problem-solving skills. Good Communication skills. Able to use all related maintenance equipment and computer applications. Must be able to understand, read, write, and speak Standard English, including technical, aircraft and quality control-related vocabulary, for technical and general business correspondence and for producing work products. Must be able to adhere to all established safety policies, processes, and procedures. WORK ENVIRONMENT: This job operates in indoor and, occasionally, outdoor settings. The indoor settings include office and warehouse/airplane hangar environments which require the use of standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines and safety gear. The outdoor settings include airplane runways and parking lots. The noise level in the work environment is occasionally loud. Occasionally subject to varying inside and/or outside temperatures, which may include extreme heat (temperatures above 100 degrees) or extreme cold (temperatures below 32 degrees). While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand. The employee frequently is required to use the fingers to make small movements such as typing, picking up small objects, or pinching fingers together. This would also occasionally require the ability to walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. Exerts up to 50 lbs. regularly, and/or up to 20 lbs. frequently. Occasionally lifts up to 100 lbs with assistance. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. TRAVEL: Travel may occasionally be required for this position (10% or less). WORK AUTHORIZATION/SECURITY CLEARANCE: Must be able to legally work in the US without sponsorship. Must be able to pass a post offer DOT drug test upon hire. EQUAL EMPLOYMENT OPPORTUNITY AND AFFIRMATIVE ACTION PLAN: Aspire MRO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Aspire will also take affirmative action as called for by applicable laws and Executive Orders to ensure that minority group individuals, females, disabled veterans, recently separated veterans, other protected veterans, Armed Forces service medal veterans, and qualified disabled persons are introduced into our workforce and considered for promotional opportunities.

MTU Maintenance Fort Worth is part of the world's largest independent jet engine MRO company based in Germany providing aftermarket and OEM-licensed engine maintenance services worldwide. As a part of MTU Aero Engines, with over 80 years of experience in the design, development, and production of jet engine components, modules, and engines; MTU Maintenance is a global network of over 4,000 employees with over 35 years of experience in the MRO market. MTU provides maintenance from targeted hospital visits to complete overhauls on over 30+ commercial aero engine and industrial gas turbine lines and has completed more than 18,000 shop visits for over 1,400 customers worldwide. Within this Global network, MTU Maintenance Dallas provides hospital shop and on-site maintenance services. Aviation Engine Quality Control Inspector The Aviation Engine Quality Control Inspector will report to the Quality, Safety, Engineering Manager via the Lead Inspector. Quality Control Inspectors review all procedures, equipment, and systems on an engine to ensure it meets federal safety regulations. They examine maintenance records to verify all maintenance has been performed and investigate incidents and complaints to determine causes. Duties/Responsibilities: Inspectors must always maintain proper part 65 certification for their current assignment. Oversee the quality control processes to ensure that maintenance and repair work meets the required standards set forth in the Repair Station Quality Manual. Conduct historical and AD/ASB research for customer engines. The inspector will be responsible for the inspection of engines, engine parts, sub-assemblies, and accessories in accordance with FAA approved technical data or instructions. This includes but is not limited to Receiving, In-Process and Final Inspections. The inspector will perform complete inspection of components, sub-assemblies, and assemblies, using approved types of measuring instruments, and inspection equipment. The inspector is responsible for verifying the execution, inspection, and successful completion of the work performed. The inspector should ensure all work scope instructions, quality and regulatory requirements are complied with. All inspection personnel must maintain proficiency in the use of various types of inspection aids, tools and gages routinely used for inspection of each item undergoing inspection. Maintain detailed records of maintenance activities, including inspections, repairs, and parts replacements in compliance with regulatory requirements. Complete maintenance logbooks and documentation accurately. The inspector must ensure that all calibrated tools have current calibration and consumable materials being used are within their listed shelf life and have not expired. Assist in the conduct of investigations into incidents or discrepancies in maintenance procedures, identify root causes, and implement corrective actions to prevent recurrence. To ensure compliance to the applicable title 14 CFR parts, inspection personnel are required to be thoroughly familiar with all inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of airworthiness of an article undergoing maintenance, repair, or alteration. Inspection personnel must remain current on requirements and how to find data contained in 14 CFR Parts 1, 43, 65 and 145. The maintenance being performed may be controlled by the requirements of 14 CFR Parts 91, 121, 125, 135, and all maintenance must be accomplished per the operator's program requirements. Perform other duties as may be directed by the Quality, Safety, Engineering Manager, Chief Inspector or Lead Inspector. Required Skills/Abilities: Demonstrated interpersonal skills in working and communicating effectively with all levels in the organization. Exceptional organizational skills and attention to detail. Problem-solving mindset and a proactive, creative approach to challenges. Demonstrated proficiency with Microsoft Office, Web applications, and general technical data, including ESM, AMM, SB's. Bachelor's degree in aviation or a related field preferred but not required. Previous experience in lieu of a degree is possible. FAA Airframe and Powerplant (A&P) certification preferred, Powerplant required. Prior experience with engine maintenance, engine changes, engine inspections and module removal & installation required. Must be able to sit at a desk and work on a computer. Must be able to lift up to 40 pounds at times. Benefits: Medical, Dental, Vision, and STD insurance are effective immediately Medical Flexible Spending Accounts Employer-paid LTD and Life / AD&D insurance 401k with employer matching up to 2% with an additional discretionary contribution to 1% provided from the employer Paid 2 weeks of Vacation, paid 10 days of PTO & Holidays Annual Tuition Reimbursement Monthly $30 Gym Membership Reimbursement Passport and renewal compliance, and TSA reimbursement Employee Assistance Program Your Future at MTU Starts Here! Ready to give your career a boost? Send us your complete application by listing your earliest possible start date. We look forward to getting to know you. MTU Maintenance Dallas, Inc. is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class. For more information and additional resources on “EEO is the Law,” please visit: ****************************************

Job Description Paragon is seeking a Quality Control Inspector to join our team in our Fort Worth, Texas office. The Quality Control Inspector performs a variety of in-process and final electrical and mechanical tests and/or inspections on various equipment, materials, and products in accordance with documented procedures. Maintains documented records of the test or inspection activities. This position focuses on processes. Responsibilities: Conducts assigned tests or inspections in accordance with documented procedures or instructions to include inspection of workmanship standards. Document results of tests or inspections. Identify and report non-conforming conditions via Paragon's Discrepancy Report (DR) Witness personnel perform work, test or inspection activities when required by documents or instructions. Maintain complete and accurate records and documentation. Performs other duties as assigned. Work with Quality Engineering staff implementing process reporting. Work with Production with areas where process improvements can be made. Qualifications: Minimum education level: High school diploma or equivalent. Minimum two years' experience in manufacturing, service or testing environment. Must have a working knowledge of Word, and Excel. Good documentation skills. Capable of working varied hours/days to meet customer delivery requirements. Physically capable of performing test and inspection activities, including visual acuity and color vision. Capable of traveling to client or supplier locations. Knowledgeable of various electronic, electrical, pressure and mechanical measurement and test equipment. Able to read and understand procedures, test documents, layout drawings and wiring diagrams. Exceptional verbal and written communication skills. Previous certification performing ASME code inspections or IPC-A-610 Electronic Assembly workmanship inspector desired but not required. Why Paragon? At Paragon, our mission is to lower the carbon footprint through innovative nuclear programs that are safe, sustainable, and economical. We support critical energy and national security applications through excellence in engineering, responsiveness, and integrity. Our team operates with a shared set of values, we stay persistent in solving challenges, collaborate with purpose, and approach every project with technical passion and professionalism. Ready to become a Paragonian? If you're looking for a technically challenging role with purpose, professional growth, and the opportunity to support national security and energy reliability, we'd love to hear from you. Paragon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

Job Description The Quality Control Inspector will be responsible with the day to day activities and inspections in multiple areas of semi-finished and finished components according to FDA and or ISO 13485 requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES Read and understand all QC's, OP's and engineering drawings related to the department and position. Read, understand and enforce all Galt Medical standards concerning Quality and Safety. Use complex measuring and inspection devices. Analytical and problem solving skills. Comply with all quality, safety, and manufacturing standards Ability to communicate effectively with co-workers and management. Exercise good judgment and decision making skills. Basic computer literacy (i.e., Windows office). Adhere to GMP Procedures Other duties as assigned POSITION REQUIREMENTS EDUCATION High school diploma, or general education degree (GED), or up to 2 years' experience related experience, and/or training or equivalent combination of education and experience. EXPERIENCE Ability to read and interpret documents such as drawings, operating instructions, and procedure manuals. Ability to write routine reports and correspondence. Good Communication skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent and to understand AQL sampling plan. KNOWLEDGE/SKILLS/ABILITIES Bilingual English - Spanish Preferred Basic MS Office skills WORK ENVIRONMENT Must be able to work with proper clean room gowns Work requires occasional standing, sitting, walking, typing, talking, hearing, close and distance reading as well as the ability to lift/move up to 25 pounds Powered by JazzHR 2bwCNEJJtx

Job Description Quality Inspector We are looking to add an enthusiastic, team-oriented, independently motivated individual to join our team. Individuals with an attitude for aptitude and a willingness to learn new things while surrounded by some of the smartest and brightest in our industry will thrive in this work environment. JOB SUMMARY: At APC the Quality Inspector performs quality control inspections, checks, and tests during the manufacture of products. Inspects materials, parts, and products at various stages of production. Records observations and may make recommendations for improving processes operations. With the knowledge of Gage reading as well as Blueprint reading and Metrology ESSENTIAL FUNCTIONS: Adheres to ISO requirements, safety, and company standards, policies, and regulations. Utilizes measurement equipment such as calipers, micrometers, comparators, and electronic test equipment. Performs receiving inspection on incoming materials, parts, and products. Evaluates product specifications and examines them to specified requirements. Compiles, interprets and records observations of inspection processes. Identifies, communicates, and assists in the resolution of quality-related issues. Performs various quality control inspections, checks, and tests of products during various stages of the manufacturing process. Understand technical drawings and specifications. Performs other duties as assigned. Knowledge of gage reading as well as blueprint reading and metrology QUALIFICATIONS: 2-3 Years in quality in a manufacturing environment. Team player with a good attitude and willingness to assist wherever necessary to get the job done. Ability to work in a fast-paced and challenging environment. Performs other duties and special projects as assigned. May assist in other related departments as required by business needs. Able to communicate effectively both written and verbal. Ability to quickly learn department operations and company procedures. Computer and software skills (Word, Excel, etc.). PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and working conditions requirement indicated below are examples of the demands that must be performed in carrying out the essential job functions. Physical Demands: Sitting, standing, and walking (up to continuously); frequent use of computer and telephone requiring repetitive finger, hand, and arm movement; occasionally carry office supplies and other miscellaneous items up to 5 / 35 pounds. Continuous use of seeing, hearing, verbal communication. Working Conditions: Work indoors and outdoors; exposure to temperatures commensurate with outdoor seasonal temperatures. APC is an Equal Opportunity Employer with opportunities for advancement. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, age, protected veteran status, or other protected categories. Reasonable accommodations may be made to enable a person with a disability to perform the essential functions of the job. APC offers a competitive salary and benefits that include 401(K), health insurance, Vac, PTO and paid holidays. Powered by JazzHR BaC1GksHeZ

Quality Control Inspectors are responsible for reducing scrap, material reduction and increase productivity on the production floors. They troubleshoot quality issues with product processes. The work closely with operations team to ensure process controls are in place to meet standard requirements. * Accurate and timely inspections of machines and finished products * Complete quality reports hourly * Verify specific dimensions and material usage to assist in cost reduction * Eliminate non-conforming products. * Meet production goals * May be responsible to perform other related duties as required and assigned * Must be able to work a 3rd shift (7pm-7am) Comply with OSHA Regulations * Non-temperature controlled; frequently exposed to very hot or cold temperatures * Mostly indoor, industrial setting, but occasionally work outdoors Regularly exposed to loud sounds and noise levels