Quality inspector jobs in Kendale Lakes, FL

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Requirements Required Skills & Qualifications Ability to understand, speak, read and write English Self-starter and/or team player with strong verbal, written, and communication skills. Courteous professional manner when interacting with all employees. Solid technology skills with ability to utilize and learn various types of technology. Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy Efficient and high standards of accuracy and organization in performing tasks Strong decision making skills and ability to prioritize work; effective time management skills Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency Proficient in Microsoft Office, including Word, Excel, internet and email Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. High School Diploma or equivalent 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: Medical Dental Vision Life and AD&D Policies Short and Long-Term Disability 401K with Company Match Paid Time Off Paid Volunteer Time Off Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Weekend Shift: Friday, Saturday, & Sunday, 7:00am - 7:00pm

Verifies the correct assembly at the in-process assembly stages as described in the applicable inspection plan. Performs physical inspection of the assembled product prior to the performance of any functional tests performed to verify safe completion of the product. Uses production control systems and generates reports for product documentation files. Performs the final inspection of the completed product, includes both a physical and documentation review. Confirms the modification status, ensuring compliance to the current requirements. Verifies the correct configuration and identification of the end product. Prepares and completes all applicable release documentation. Ensures compliance to the quality procedures affecting the production process. Assists in troubleshooting technical problems of work in progress. Participates in continuous improvement efforts Maintains tool calibration log and schedules Performs other functions as assigned that do not conflict with the final inspection function. Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements. Moves between production assignments that utilize multiple skills as needed to support production requirements. Participates in the cross training of other technicians as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. Carries out other duties as assigned. Requirements Has knowledge and experience using calipers, micrometers, CMM's, thread gages, etc Excellent Communication skills both verbal and written Cross functional collaboration necessary US Citizenship or Permanent Resident required for US Department of Defense work Familiarity with the defense/aerospace industry Prior quality experience required PM19 TopFlite, a division of kSARIA Corporation is an Equal Opportunity Employer/Disabilities/Veterans

Instasks App is a Professional Concierge Service. The app provides top-tiered professionals and clients with an online platform. Our unique approach to building an App is to give the client and the provider instant bookings and an easy process of all services: For example, client requests for quick tasks and large projects. Providers receive custom requests for their specialized skills. The app takes care of all invoicing between client and provider with a detailed invoice. And book all the confirmed jobs. We track providers' locations for the client's en route to any job. We created a portal platform to guide you in listing your professions. The platform provides you with schedules, invoicing and credit card processing are all part of the enhanced technology. Clients will have a choice to give the providers reviews and star ratings to ensure our elite services when booking on our app. Our mission is to help all providers strive to achieve their financial and independent goals. To have more time with their families and create a brighter future for all. The App offers opportunities to providers over the age of 18 and, by law, over the age of 21 for any tasks serving liquor. Build your future with a secure & safe platform. Be your own boss by choosing the TASKS that best suit your schedules and be available to work when you want to work. Build your income to help increase your revenue. Book tasks that are within a 15-mile radius. Our language preferred gives you better communication skills during your tasks. Our client's and providers' health & well-being are our highest priorities. BACKGROUND CHECK POLICY: All providers accountants go through an extensive (background check) through a third party company. The certificates they receive are in place to ensure the provider and client feel safe. The document you receive from the third-party background company can be given to any job you are applying for. Our policy states all providers must go through a third party background check only after you are confirmed for a job. We request you do not go through the background check link until you are confirmed for any jobs. ETIQUETTE TRAINING POLICY: Each provider will go through etiquette training to ensure that every provider is a friendly and well-mannered individual. We are poised to give our clients the very best in professional service. Our platform should leave no room for laxity as we work hard to bring the very best to our customers. SKILLS AND ABILITIES: Requires working from detailed instructions and occasional independent decision-making. Ability to read, analyze and interpret documents such as safety rules, operating and maintenance instructions, or procedural manuals. We are looking for a responsible Quality Inspector to check the quality of all incoming and outgoing material and products as well as production procedures. You will be a firm advocate of quality in our business. The ideal candidate will possess a trained eye for detail and will be reliable and committed. In-depth knowledge and comprehension of quality standards are essential. The goal is to ensure that our products are made of flawless materials with well-functioning equipment. That way, our customers will enjoy high-quality merchandise so that we can achieve long-term success. Responsibilities Read blueprints and instructions to comprehend the quality expectations for the product and supplies. Approve or reject raw materials with respect to quality standards and record supplier performance. Select output samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.). Use automated systems to perform complex testing procedures. Maintain records of testing, information and various metrics such as the number of defective products per day etc. Inspect procedures of the entire production cycle to ensure they are efficient and comply with safety standards. Monitor the use of equipment to ensure it is safe and well-maintained and discard any that don't meet requirements. Prepare and submit reports to the quality manager. Requirements Proven experience as a quality inspector or relevant role. A keen eye for detail and a results-driven approach. Responsible and trustworthy. Familiarity with quality testing machines and systems. Thorough knowledge of quality control standards and testing methodologies. Certification of quality control is a strong advantage (ISO 9000 etc.). Working knowledge of MS Office. High School Degree; Further qualifications will be a plus.

Join Barfield and Become a Part of the Adventure! If you are a talented Quality Inspector interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry, it is a subsidiary of Air France Industries KLM Engineering. We are looking to hire a dedicated Quality Inspector to join our team. The Quality Inspector will support our Quality Department. Job Summary: To make sure the shop complies with all applicable Federal Aviation Regulations, manufacturer's specifications and recommendations. Your day to day will consist of daily inspections and ensuring that all applicable FAA regulations are met. Duties and responsibilities: Maintain and keep current a file of pertinent FAA regulations, Advisory Circulars, Type Certification Data Sheets, and Air-worthiness Directives. Assure that periodic checks are made of all inspection tools and test equipment used by the shop and to remove from service any item found to be beyond its recertification due date. Assure current records of those inspections and tests are maintained. Determine that no defective, unserviceable, or un-air-worthy parts are installed in any component or articles released by the shop. Notify Director - Quality of any circumstance requiring the execution of a malfunction and defect report. Such report will be filed by the Miami station within the prescribed time after the malfunction or defect has been discovered, or FAA will be contacted for instructions. Accomplish final acceptance of all incoming material including new parts, supplies and the airworthiness of articles on which work has been performed outside the shop by contract. Conduct preliminary, hidden damage, in-progress, and final inspection of all articles processed by the shop and record results as outlined in the manual. Oversee the proper tagging and identification of all parts and components as outlined in this manual. See that rejected and unserviceable parts are handled in such a way as to prevent their use as serviceable parts. Maintain files of completed work order and inspection forms in such a manner that the file pertaining to a specific item repaired can be readily located for review. See that all Life-Limited products, such as adhesive, sealants and lubricants are not kept beyond their “Do not use after” date. Required Skills Knowledgeable with FARs Knowledgeable with inspection methods, equipment and tools to determine airworthiness of article or unit Able to perform inspections on maintenance, preventive maintenance or alterations done to articles Able to use mechanical, electronic and visual inspection aids Knowledge of ISO9000 series Knowledge of basic electronic theory 3 or more years of experience in aviation. You embody our values: CUSTOMER FOCUS We strive to provide the best services to our customers. INTEGRITY We are personally accountable for the highest standards of ethical behavior. TEAMWORK We are committed to a teamwork environment. ADAPTABILITY In an ever-changing world, we are adaptable to the required challenges. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Job Summary of the R&O Quality Inspector The R&O Quality Inspector is responsible for the Quality Control of the repairs within the 145-repair station. Must adhere to the Repair Station Quality Control Manual (RSQCM), Component Maintenance Manuals (CMM), and all 14 CFR Aviation Regulations. Duties/Responsibilities of the R&O Quality Inspector Train, direct, and assist all inspection personnel performing work under the repair station certificate as directed by the Accountable Manager. Ensure the proficiency of every inspector by completing the Inspector Proficiency Checklist Form RSF-211-01. Ensure all incoming, hidden damage, preliminary, in-process, and final inspections are performed following the procedures outlined in the manual. Respond to any request for inspection of this repair station certificate. Determine the final disposition of articles failing to meet the incoming inspection review as directed by the Accountable Manager. Ensure appropriate calibrations and checks are made on the tools and equipment used by the repair station as described in the manual. Red-tag or placard any malfunctioning or non-functioning equipment. Assist Field & Tech Services with aviation technical questions. Additional duties as assigned Note: This description is an outline of the major recurring responsibilities of the job. It is not intended to be all-inclusive of the work to be performed. Other related job objectives, special assignments, and less significant responsibilities typically performed by the incumbent are not included. Required skills/abilities of the R&O Quality Inspector Read and understand drawings, manuals (CMMs), work instructions, and schematics. Use industry-standard electronics bench test equipment, i.e., Spectrum Analyzer, O-scope, multi-meter, and power supplies. Ability to read, write, and speak English. Proficient with a PC and Microsoft Office products (Excel, Word, Outlook) Computer and website navigation skills are required. Strong Customer service and communication skills Phone skills are required, as well as organizational skills Knowledge, Education, and Experience of the R&O Quality Inspector Airframe or Repairman Certification, or the ability to obtain within a six-to-twelve-month timeframe 3+ years of experience working with an AS9100 QMS 3+ years of experience in electronics or avionics installation and repair Experience dealing with Aviation OEMs is a plus General knowledge of the FAA requirements for a FAR 145 repair station is required

Immediately Hiring: Quality Inspector (Manufacturing / First Shift) Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Shift: 1st Shift Monday - Friday Direct Hire, Competitive Pay, Great Benefits, Work-Life Balance Just 4 miles from Fort Lauderdale's sunny beaches, Dayton Granger, Inc designs, produces and supplies cutting edge avionics products in support of current and upcoming programs for commercial, general aviation and military customers. Celebrating 80 years of extensive experience, DG provides stability to its employees while maintaining the comforts of a small company environment. Key Responsibilities: Inspects in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards. Performs tasks from blueprints, engineering change notices, or established operating procedures. Determines acceptance, rejection, or rework requirements of unit. Prepares and maintains inspection reports and records. Perform additional tasks assigned by management Follows all DG safety procedures as per company policies and per the Facility Engineer/Safety Director Required Qualifications: High School Diploma or GED Minimum one (1) year of experience as a Quality Inspector in a manufacturing environment Hands-on experience with precision inspection tools, including calipers, micrometers, height gauges, and other measuring Instruments Familiarity with ERP systems Basic computer proficiency (Microsoft Word, Excel, Outlook, and other relevant software Strong verbal and written communication skills in English Ability to lift, push, and pull up to 25 lbs Visual requirements include close vision, color vision, peripheral vision, Pre-Employment Requirements: All employment offers are contingent upon successful completion of a background check and drug screen, in accordance with company policy and applicable law. Why You'll Love Working Here: We are a multi-generational team with members representing a diversity of cultures, educational backgrounds, experience levels and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a long-standing supplier providing cutting edge products in support of long term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs and up and coming markets. Additionally, DG loves its employees! The average employee tenure is around 10 years. Length of service milestones are celebrated company-wide and employees may make selections of anniversary gifts. Benefits Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match. Paid Time Off (PTO) and paid holidays. Mental health benefits. Complimentary life insurance with the option for supplemental coverage. Paid parental leave Short-term and long-term disability coverage. Excellent work-life balance. Tuition reimbursement. Dynamic and collaborative work environment. On-site gym. Access to advanced technology and resources. Length of service/milestone anniversary gifts. Team-building activities. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This position requires use of or access to information subject to the Export Administration Regulations (“EAR') or the International Traffic in Arms Regulations (“ITAR'). Accordingly, all applicants must be U.S. persons within the meaning of these regulations. Under ITAR, a U.S. person is defined as a U.S. Citizen, U.S. Permanent Resident, or a person who is a protected individual under the Immigration and Naturalization Act (8 U.S.C. 1324b(a)(3)).

Job DescriptionDescription:Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements:What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs.

Full-time Description Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs. Salary Description Hourly, Non-Exempt

Segula Technologies is a global engineering and consulting leader, delivering cutting-edge solutions in aerospace, automotive, energy, rail, and life sciences. Established in 1985 and headquartered in France, we operate in over 30 countries, driving technological innovation, enhancing industrial performance, and supporting clients throughout the entire product lifecycle. Our expertise spans design, manufacturing, testing, and project management, empowering businesses to overcome complex engineering challenges while championing sustainability and innovation. Why Work With Us? At Segula Technologies, we value our people and offer a comprehensive benefits package to support your health, well-being, and financial future. You will beeligible for benefits, including: * Medical , Dental and Vision coverage . * Employee life insurance * Short & Long-Term Disability * Voluntary Term Life, AD&D, & Critical Illness insurance * 401(k) plan with Segula matching up * PTO days Job Description * Adhere to General Work Requirements as required in coordination with Quality leadership * Conduct weighing procedure in accordance with manufacturers recommended practices and procedures * Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt * Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) * Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements * Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity * Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained * Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) * Perform walk around inspection of aircraft for release from maintenance * Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service * Provide data to customers as requested Qualifications * You have an Airframe & Powerplant (A&P) Certification * You have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience * You have a minimum of 2 years' of corporate / commercial jet experience * You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools * You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment * You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements * You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc.) * You have working knowledge of return-to-service procedures * You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification Additional Information Here's a heads-up of the upcoming steps: * Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. * Interview with the Hiring Manager * Offer Letter: We´ll extend you an offer and start the onboarding process. * Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions * You start your next challenge!

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier's Benefits Program With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: Insurance plans Dental, medical, life insurance, disability, and more Competitive base salary Retirement savings plan Employee Assistance Program What are your contributions to the team? Adhere to General Work Requirements as required in coordination with Quality leadership Conduct weighing procedure in accordance with manufacturers recommended practices and procedures Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) Perform walk around inspection of aircraft for release from maintenance Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service Provide data to customers as requested How to thrive in this role? You have an Airframe & Powerplant (A&P) Certification You have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience You have a minimum of 2 years' of corporate / commercial jet experience You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc.) You have working knowledge of return-to-service procedures You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification This position may be eligible for up to a 5K sign-on bonus! (Terms & Conditions apply) You have an Airframe & Powerplant (A&P) Certification

When applicable, Bombardier promotes flexible and hybrid work policies. **Why join us?** Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. **Bombardier's Benefits Program** With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: + Insurance plans + _Dental, medical, life insurance, disability, and more_ + Competitive base salary + Retirement savings plan + Employee Assistance Program **What are your contributions to the team?** + Adhere to General Work Requirements as required in coordination with Quality leadership + Conduct weighing procedure in accordance with manufacturers recommended practices and procedures + Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt + Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) + Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements + Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity + Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained + Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) + Perform walk around inspection of aircraft for release from maintenance + Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service + Provide data to customers as requested **How to thrive in this role?** + You have an Airframe & Powerplant (A&P) Certification + You have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience + You have a minimum of 2 years' of corporate / commercial jet experience + You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools + You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment + You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements + You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc.) + You have working knowledge of return-to-service procedures + You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification **_This position may be eligible for up to a 5K sign-on bonus!_** _(Terms & Conditions apply)_ **Now that you can see yourself in this role, apply and join the Bombardier family!** Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. **Job** Quality Inspector **Primary Location** Opa Locka Service Center **Organization** Learjet Inc **Shift** **Employee Status** Regular **Referral Amount** $2,000.00 **Requisition** 2483 Quality Inspector

CAP Government, Inc. is seeking the immediate hire of a licensed QC Multi-Disciplined Code Inspector needed for construction project inspection and plan review services. The work involves interpreting and applying these regulations to customer relations, reviewing building construction blueprints, product approvals, shop drawings, and other project documents. Some travel may be required for inspections and/or managing projects in the assigned area. Candidates must possess a professional demeanor, have both technical and industry experience, and be a team player. Duties, Responsibilities, and Qualifications Demonstrates excellent communication and customer service skills. Will visit the job site full-time (M-F), 40 hrs. per week, performing the following minimum tasks: Reviewing, observing, and verifying that construction conforms to the scope of work identified by the approved construction documents Observing and verifying that construction conforms to all applicable codes, standards, and guidelines, including the applicable International Codes, local codes, and DoD Standards. Writing/Updating field reports. Experience with MS Office (MS Word) is required. Experience with MS Excel and Adobe Acrobat is highly recommended and desired. Taking photos of construction progress Uploading photos and field reports to our file sharing website for viewing by client Reporting on removal or repair of defective or unsuitable work Reviewing contractors' monthly payment applications and recommending payment to owner Completing a monthly Design & Construction Status Report and distributing to the client Issuing Certificates of Occupancy and/or Certificates of Completions Verifying completion of punch lists Perform other related duties as assigned by the Manager Education/Experience: State of Florida Plan Review License (PX) or provisional license in building, electrical, mechanical, and/or plumbing; or State of Florida Inspector License (BN) or provisional license in building, electrical, mechanical, and/or plumbing, or ICC Residential & Commercial Plans Examiner and/ or Inspection certification in building, electrical, mechanical, and/or plumbing; or Minimum 5 years of experience performing code compliance inspections is required Bachelor's degree in the construction or design field is desirable 3 years in construction administration or superintendent/construction manager role is desirable Experience in managing construction projects as an architect, superintendent, project manager, or similar role, specifically during the construction administration phase of a project is desirable Must have knowledge of the Florida Building Code and other regulations pertaining to construction and development. Ability to understand and interpret codes and evaluate project proposals and projects under construction to verify conformance with code requirements. We offer competitive compensation packages; medical, dental, and vision coverage; life insurance, short- and long-term disability insurance; 401(k); employee referral; educational reimbursement; and more. Salary: Commensurate with experience and licensure Equal Opportunity Employer / Drug-Free Workplace / Veterans Our firm is committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state or local laws.

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

Quality Control Inspector Miami International Airport Quality Control Inspectors report to the Quality Manager. This position requires certification under FAR Part 65, subparts D, E and acceptable training and experience. A minimum of three years documented verifiable experience or acceptable training on Transport Category Aircraft (including military types) is preferred. [FAR: 65. Subpt-D, 65. Subpt-E]. Duties and responsibilities include: Ensuring that aircraft maintenance work, materials and practices conform to the regulations and company policies and procedures. Reviewing paperwork, including maintenance forms, parts tags, work cards, maintenance orders and log sheets, etc. for proper completion per company requirements. Perform facility audits, work in progress audits and ramp and stockroom checks for cleanliness and organization. Coordinating RII inspection requirements for scheduled work. Accomplishing RIIs in accordance with the company procedures. Performing receiving inspection of parts, materials and components to ensure conformity with company requirements. Perform routine inspections of company tooling for condition, security and calibration. Making recommendations to overcome deficiencies in procedures, manuals or with aircraft or equipment. Performs additional duties and responsibilities as directed in other company manuals such as the Fueling and CASS Manuals. Perform any additional duties and responsibilities as directed by the Quality Manager or Director of Quality. Requirements Qualifications and Requirements Must hold a current Airframe & Powerplant license. Must be flexible to work any shift as necessary including weekends and holidays. Must be legally authorized to work in the United State and able to acquire airport security clearance. Must be fluent in the English language (written and spoken). Must be willing to travel on short notice. Have Boeing 767 aircraft maintenance experience, or equivalent experience working on wide body aircraft. Have at least two years of Quality control experience (preferred). Have strong analytical skills. Able to read and understand technical documents (AMM, IPC's SRM's, EO's, AD's, etc.) Able to identify problems, collect data, and develop corrective actions. Able to interact with Federal Aviation representatives. Physical Requirements. Must be able to lift 25 pounds.

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Quality Inspector Sulzer offers you a wealth of opportunities to drive your career into the direction that you want, depending on your skills and interests. We invite you to apply if you are ready to take the next step. Your main tasks and responsibilities: Responsible for ensuring all findings are recorded. Responsible for reporting all findings to Production and Inventory Maintain ISO standards Ensure proper storage / archiving of project findings and related information Communicating regularly and promptly regarding ongoing work Continually improve on processes & procedures to support quality and safety. To succeed in this role, you will need: Attention to detail Be able to use Parts Manuals, Repair Manuals, & Service Bulletins Be able to read part drawings and blueprints Measure parts using micrometers, calipers, pi tapes, pin gauges, block gauges, & dial indicators Basic Microsoft Office applications experience Strong verbal and written communication skills with the ability to interface with personnel from diverse backgrounds at all levels of the organization. Strong organizational skills and the ability to prioritize and manage multiple project What we offer you: 11 Paid Holidays 15 Paid Time off (PTO) Days Medical, dental, vision, life, and disability 401k with 6% company match Employee Assistance Program Employee Wellness Program Bonus Programs No visa or work permit support can be provided for this role. Awarded one of the top employers in the country for the past 3 years! Do you have a question about the role? Reach out to Jerome Blalack at ************************* or Hiring Manager - Brian Berger You apply with your employee profile in SuccessFactors, make sure you complete the relevant sections before submitting your application. We encourage you to inform your current people manager when you apply for a new role within Sulzer. We are looking forward hearing from you! Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment. We are proud to be recognized as a Top Employer 2025 in Brazil, China, Finland, Germany, Ireland, Switzerland, South Africa, the UK and the USA. [Not translated in selected language]

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.