Quality inspector jobs in Lower Merion, PA - 153 jobs

Job DescriptionJob Summary: Quality Inspector:Precision Machine Shop is seeking a dedicated and detail-oriented Quality Inspector to join our team. The Quality Inspector will be responsible for ensuring that our products meet the highest quality standards, from incoming raw materials, In-process assemblies, to finished goods. They will play a vital role in maintaining our reputation as a trusted manufacturer of precision metal products. Responsibilities: Quality Inspector: Conduct inspections on incoming raw materials, parts, sub-assemblies, and finished goods to ensure compliance with quality specifications and standards. Follow established inspection checklists, testing procedures, and documentation protocols. Perform visual inspections, measurements, and functional tests utilizing various tools. Identify and document non-conformities, defects, and discrepancies, and work closely with the production team to address and resolve issues promptly. Adhere to relevant quality standards, regulations, and industry best practices. Participate in internal quality audits and assist in the implementation of corrective and preventive actions. Provide timely and accurate inspection reports and documentation. Collaborate with cross-functional teams to drive continuous improvement initiatives related to quality control and assurance. Stay updated on industry trends, advancements, and regulatory changes related to quality assurance. Maintain a clean and organized work area, ensuring that all testing equipment is properly calibrated and maintained. Requirements: Quality Inspector High school diploma or equivalent; additional technical certifications or qualifications in quality assurance are preferred. Proven experience as a Quality Inspector, preferably in the metal fabrication or manufacturing industry Strong knowledge of quality control principles, methods, and techniques Proficient in using measurement tools and equipment such as calipers, micrometers, gauges, and CMM (Coordinate Measuring Machine) Excellent attention to detail with an ability to identify and document quality issues effectively. Familiar with reading and interpreting engineering drawings, specifications, and technical documentation Good communication skills, both written and verbal Ability to work independently and collaboratively within a team environment. Familiarity with ISO 9001 or other quality management systems is a plus. Knowledge of Lean Six Sigma methodologies is an added advantage. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: * Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. * Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. * Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. * Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. * Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. * Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. * Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. * Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. * Determines acceptability or rework by conducting inspections and physical tests of reworked product. * Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. * Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. * Contributes to team effort by accomplishing related results as needed. * Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator * Performs other duties as assigned * Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: * Health Insurance * Dental Insurance * Vision Insurance * Basic and Voluntary Life * Long-Term Disability * Flexible Spending Accounts * Employee Assistance Program * Paid Time Off * Paid Holidays, Bereavement, Jury Duty * 401(k) with company match * Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

The Quality Technician in microbiology aseptic processes ensures products meet microbiological standards and are manufactured in a sterile environment. This role monitors quality assurance standards and encourages the team to consistently deliver excellent results. The Quality Technician is responsible for executing best practices, goals, and established standards for the team. Primary Responsibilities * Perform tests to identify harmful microorganisms, maintain a sterile environment, and ensure regulatory compliance * Document and analyze test results following good laboratory practices for microbiology and quality control laboratories * Identify and address production issues, contributing to corrective action * Inspect work daily, maintain cleanliness, organize supplies, and assemble sterile products using aseptic technique * Handle biohazard spills, train new hires, and demonstrate the use of cleaning chemicals * Uphold quality standards, follow GFSI, HACCP, and GMP guidelines, and participate in food safety inspections * Support sanitation operations, monitor performance, and provide report * Address customer complaints, conduct audits, and contribute to quality assurance improvements * Promote continual improvement and collaborate on cross-functional projects * Perform routine environmental monitoring within cleanrooms and production areas to detect microbial contamination * Conduct microbiological assays on raw materials, in-process samples, and finished products using various techniques * Accurately record and interpret test results, maintaining detailed documentation of activities, including deviations, investigations, and corrective actions * Participate in investigations for out-of-specification (OOS) results, deviations, and complaints related to microbiology testing * Ensure proper calibration and maintenance of laboratory equipment used for microbiological analysis and QC testing Prior Knowledge/Experience * Bachelor's Degree in Microbiology, Biology, or related field * 1-3 years of experience in quality; food processing experience preferred * Strong understanding of aseptic techniques and microbiology principles * Experience with various microbiological testing methods, including plate counting, membrane filtration, and rapid microbial detection * Proficiency in data analysis, documentation, and recordkeeping * Excellent attention to detail; ability to work independently and in team environments * Familiarity with GMP regulations and quality systems * Ability to utilize provided PPE - safety glasses, ear plugs/muffs, bump caps, dust masks, company uniform, safety shoes * Ability to be respirator certified if required * Physical ability to sit, stand, walk, climb, stoop for up to 8 hours; lift 55 lbs consistently; lift/hold objects overhead for extended periods * Ability to climb and work on a 40-foot extension ladder for extended periods as needed; work at heights up to 50 feet * Ability to maneuver and work in confined areas with variations in temperature, humidity, and air quality The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Job Summary The Quality Systems Associate performs a wide variety of duties including, but not limited to, management of controlled documents Quality Management Systems (QMS) performance oversight, data collection and reporting of quality metrics for management reviews and monthly quality metrics performance. This position will be responsible for managing documentation, data management systems. This position assists with the oversight of internal audit program and Quality Plan. Job Responsibilities · Oversee the management of controlled documents throughout their lifecycle for GxP and non-GxP Operations. · Establish and maintain document control workflows and work instructions (e.g., Veeva document routing guides). · Manage job descriptions for all Avid personnel to assure inspection readiness. · Manage room support during audits or regulatory inspections, as required · Provide audit support during Site Self-inspection and external audits/inspections, including managing support rooms and ensuring timely responses. · Manage the transfer of paper documents to paperless systems, as applicable · Provide user management of data management systems and provide quality support to users (e.g., Veeva). · Provide guidance on Good Quality Practices (GQP) and ensure adherence to regulatory requirements. · Generate monthly quality performance metrics using Excel PivotTables to visualize and assure timely closure of outstanding quality actions. · Lead document migration projects and implement digital transformation initiatives to streamline workflows and reduce manual processes. · Support oversight of external manufacturing organizations (i.e., creating TrackWise records for external action tracking) · Support GxP training program updates in SuccessFactors, maintaining compliance with training requirements. · Write or revise SOPs associated with document control or areas of responsibility · Assist in or conduct GxP investigations (e.g., complaints, deviations, CAPA, and effectiveness checks) · Collaborate with cross-functional teams to ensure audit readiness and continuous improvement of quality processes. · Identify any improvement opportunity within responsible areas and provide action plans, as required · Other duties as assigned. Job Qualifications · Bachelor's degree · Minimum of 2 years of experience in Pharmaceutical Quality Assurance Additional Skills/Preferences: · Demonstrate experience in quality metrics reporting and audit preparation · Have experience in Good Quality Practices · Strong knowledge of MS Word with form generation and password protected functionality · Strong knowledge of MS Excel (e.g. formula, pivot tables and macro functionality) · Detail-oriented, ability to work independently, highly motivated. · Strong interpersonal, verbal and written communication skills · Ability to work with colleagues · Ability to work independently and escalate issues when necessary · Experience with TrackWise, Veeva, and SuccessFactors for document control and training compliance. Qualified applicants must be authorized to work in the United States on a full-time basis. Lilly will not provide support for or sponsor work authorization and/or visas for this role. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $65,250 - $148,500 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

MAJOR JOB DUTIES AND RESPONSIBILITIES (List in order of importance) Complies with company policies, procedures, work instructions and training requirements. Positively Influences peers and other line-level personnel to comply and adhere to applicable requirements. Carries out responsibilities in compliance with the Quality Manual and applicable regulations (cGMP, MDD and GDPMDS). Performs attribute inspection activities to determine acceptability of kit, components, and/or shipped packages; documents the results. Sends kit back to production team or manually corrects kit when errors are discovered; documents and tracks any errors. Performs batch record review for conformance to Good Documentation Practices. Performs assembly lot review and forwards documentation to Supervisor/Manager. Physically demarcates, stages, packs and/or palletizes accepted kits/shipped orders. Assists in the maintenance of an organized production environment, free of distractions and debris. Performs other duties as assigned.

ABOUT THE GROUP From a small store in Turin to a large, internationally recognized group: we are present in 90 countries around the world, with over 5,000 employees and 30 companies, managed directly and indirectly by the Luigi Lavazza Spa parent company, which distribute and market our products and coffee machines. In addition to Lavazza, the following brands are also part of our Group: Carte Noire, Merrild, Kicking Horse, Eraclea and Whittington tea. Joining Lavazza means doing business with passion, knowing that the impact of our work goes beyond the quality of the production chain. We are a big family and are constantly looking for new talents who share our values and can enrich our team. We combine competitiveness with social and environmental responsibility as we create superior quality products available for consumption both at home and out of home, and distributed through all channels: Retail, Foodservice, Office Coffee Service (OCS), and Vending. Our strong, diversified presence enables us to offer consumers and clients perfectly suited solutions, for any occasion and time of day. #LI-JB1 JOB OVERVIEW Lavazza North America, makers of Lavazza Roast & Ground Coffee along with FLAVIA , is leading the coffee revolution. The world's leading Brew-by-Pack refreshment system, the Flavia Brewing System (FBS) created Brew-by-Pack technology in 1983, and the company was the first to pioneer Filter pack packaging to retain freshness, eliminate residual flavour, provide perfect-portion size, and protect contents from sunlight, oxygen, and other harmful elements. Today, Lavazza North America continues that tradition and has added retail whole beans and ground coffee to its portfolio. The purpose of the Operations Quality Inspector role is to ensure that food safety and quality are verified in every step of our process to ensure consumer satisfaction. The Operations Quality Inspector will perform incoming material inspections, along with product inspection of roasting, grinding, and packaging operations. Aid in the resolution of quality matters by liaising with Supply, R&D and Supplier Quality Assurance and manage continuous improvement opportunities through corrective actions. Location: West Chester, PA JOB RESPONSIBILITIES General support to the Operations Quality Manager regarding Lavazza North America's West Chester, PA plant quality systems and procedures. Test our products on the Roasting, Grinding, and all Packaging lines. Conduct food safety inspections and reviews. Control of Non-Conforming product, verify HOLDS, review records, and assist with investigations. Manage the storage of production samples. Assist with customer complaint investigations on the production floor. Maintain incoming material inspections, supplier Non-Conformance creation, HOLDs, and incoming material test equipment. Review production data entry into SAP and QDA for accuracy and completeness. Environmental Swabs, Nitrogen & Compressed Air testing program. Handle sample preparation and shipments to external laboratories. Partner with Supply, Supplier Quality, Quality Lab and Maintenance to ensure on-time and reliable leadership and support is provided. Performs other related duties and assignments as required. Ability to work weekends as needed. Ability to work extended shifts as needed. PROFESIONAL QUALIFICATIONS High School Degree or GED essential; 2 yr. Technical Degree preferred 0 to 3 years of related or equivalent experience, preferred Demonstrated ability to embrace the culture of Lavazza Group Strong interpersonal and communication skills are required to effectively communicate with other business units at a variety of functional levels Demonstrates strong communication capabilities, both verbally and written, using appropriate Microsoft Office tools, i.e. Word, Excel, PowerPoint, as well as other Lavazza ancillary software Strong, flexible team player that works to meet both personal and organization goals Very high of attention to detail, with ability to multi-task Desire to learn about the inner workings of Quality and Food Safety in the Manufacturing environment BENEFITS/PERKS Competitive Medical, Vision, Dental Benefits 401K Package Employee Assistance Program Onsite Cafeteria and Gym (West Chester location) Ability to be barista certified Monthly Lunches provided by Lavazza Tuition Reimbursement Performance Development Plans Employee Discounts Flexible business casual dress code - jean friendly! Free coffee, anytime! Lavazza is an equal opportunity employer that is committed to diversity and inclusion in the workplace. Lavazza prohibits discrimination and harassment of any type and affords equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job DescriptionQuality Control Inspector - Level III The Level III Inspector is responsible for performing complex first article, in-process, and final inspections to ensure that precision machined components, assemblies, and products meet all customer and company quality standards. Work involves inspection of diversified, tight-tolerance parts for industries such as aerospace, medical, defense, and semiconductor manufacturing. Responsibilities may also include supplier audits and qualification activities. This position requires extensive hands-on experience with precision machining processes, engineering drawings/blueprints, and Geometric Dimensioning and Tolerancing (GD&T). The Level III Inspector develops inspection procedures, designs specialized gauging or measurement setups, and uses a range of precision and electronic measuring instruments. The role also includes programming and setup of Coordinate Measuring Machines (CMMs) and OGP vision systems, as well as training other inspectors in their use. Primary Responsibilities Verify that precision machined parts and assemblies meet all customer and internal specifications for quality and conformance. Accurately document all inspections and verifications through signatures, stamps, or electronic records. Review and confirm the completeness and accuracy of supplier certifications. Lead quality initiatives for assigned customers and support general quality efforts across all programs. Mentor and train Level I and Level II inspectors on inspection techniques, control plans, and FAI (First Article Inspection) reporting. Serve as the primary trainer for CMM and OGP vision system programming and operation. Promote and maintain a safe, organized, and 5S-compliant work environment. Support workload management within the inspection area to ensure efficiency and accuracy. Perform additional duties as directed by management. Knowledge and Skill Requirements Extensive experience inspecting precision machined components and tight-tolerance mechanical parts. Thorough understanding of engineering drawings, blueprints, and GD&T, with the ability to interpret and train others in these standards. Strong knowledge of both English and Metric measurement systems. Proficiency with statistical tools and variance analysis. Skilled in the use of precision measuring instruments and electronic devices (micrometers, height gages, surface plates, comparators, CMMs, OGP systems, etc.). Ability to interpret customer specifications, national standards, and technical documentation. Strong communication, mentoring, and collaboration skills with the ability to work effectively with employees, management, and customers. Physical Requirements Annual eye examination and one-time Ishihara (Color Blindness) Test required from an accredited eye care professional. Working Conditions Standard manufacturing and inspection environment. May require light lifting, standing, walking, and sitting for extended periods. Occasional local travel and weekend work may be required

Job Description Under the general direction of the Quality Engineering designee, the Quality Inspector may perform receiving, in-process, and final inspection of cable and connector components, CNC parts, and cable assemblies. The Quality Inspector will provide support for the department to which they are assigned (CNC, Cable Assembly, Incoming, etc.). The quality inspector may also support random internal audits of the production process. ESSENTIAL JOB FUNCTIONS Provides inspection criteria knowledge in order to meet quality, cost, and on-time delivery goals Uses standard metrology tools such as Micrometers, Digital Indicators, Comparators, Plain Plugs, Plain Rings, Thread Plugs & Rings, Profilometer Ability to measure accurately and record clear, concise data on internal and external documents Uses microscopes to make pass/fail decisions for attribute defects based on customer requirements/standards Interprets basic blueprint & engineering specification Performs final inspection of products and materials using engineering drawings and Process Control Drawings as required. Completes final inspection reports and first article inspection reports as required Ability to generate material non-conformance reports Good communication skills with co-workers, engineering, and varying support personnel Able to work in a clean room environment supporting space grade cable assembly production Learns and maintains X-Ray Evaluator certification for finished product Ability to Fixture and run parts on advanced measurement systems Performs internal calibrations when required Performs setup, in-process, & final inspections following a Quality Inspection Plan and maintain third party quality records *Other duties as required in support of the department and the company* SUPERVISOR RESPONSIBILITIES The responsibilities of this role do not include supervising other employees; however, Quality Inspector positions offer opportunities for career advancement. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE High school education or equivalent Two (2) years' experience in a manufacturing environment, inspection experience preferred Ability to work within the requirements of an ISO 9001 / AS9100 quality system Basic computer skill sets including Word, Excel, Access, and Outlook Experience using ERP system, preferably SAP Willingness to work in a flexible environment and is willing to be cross trained on multiple products and processes Ability to execute tasks assigned with minimum supervision CERTIFICATES, LICENSES, REGISTRATIONS: ASQ Certification preferred J-STD-001 and J-STD-001 Space Addendum Certification preferred LANGUAGE REQUIREMENTS Ability to read, write, speak, and understand English Strong professional written and verbal communication skills JOB SKILLS Experience within the Aerospace Industry with exposure to AS9100 regulations preferred Outstanding organizational skills and experience with managing multiple deadlines at once Strong technical skills including the ability to read and understand technical drawings Proficient in communicating information to individuals and groups in both written and presentation form Strong desire to work in a team made up of a cross functional group of individuals Self-starter that can work extended hours as required to satisfy customer deadlines Proficient in MS Office Experience utilizing an ERP system required (SAP preferred) Writing skills required to complete documents and forms Reliable and flexible to work additional hours on short notice to complete orders and/or special projects to meet customer demands PHYSICAL DEMANDS As part of their job duties, the employee must be able to sit, stand, and walk throughout the day while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to reach, stretch, push, pull, crouch, stoop, and occasionally lift objects weighing up to twenty (20) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Micro-Coax, an Amphenol Company is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations Ability to compile with JSA in specific areas EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL

Innovative Solutions Support (IS&S), located in Exton, PA is a diversified international avionics supplier to civil, military, business, and commercial markets. The scope of the IS&S Quality Management System is the design, development, production and repair of Integrated Cockpit Display and Navigation Systems, Air Data Systems, Fuel Quantity Measurement Systems, Multifunction Engine and Hydraulic Displays, and Autothrottles. IS&S offers excellent career opportunities for those who thrive on cutting-edge product design and high output production and have the drive to contribute directly to the success of the company. IS&S has opportunities for Quality Inspectors on the first and second shift. Responsibilities: Perform inspection of all incoming material; perform in-process and final inspections, as required; maintain calibration pool of test equipment and tools. Work with Quality Assurance Management to plan and prioritize projects that are in accordance with the objectives and strategic plans of the company. Follow established department and laboratory procedures to accomplish tasks using proven methods. Where opportunities exist, suggest improvements to departmental procedures to achieve company objectives with improved efficiency. When appropriate, coordinate supply base and third parties to sort, rework or otherwise remedy components, assuring compliance to requirements and ongoing production. Perform inspections of electrical components including resistors, capacitors, diodes, and integrated circuits. Perform mechanical inspection using micrometers, calipers, indicators, height gages, optical comparators, coordinate measuring machines and various other inspections tools. Perform in-process inspections of printed wiring assemblies to IPC-A-610 standards and harnesses to IPC-A-620 standards. Perform other inspections including glass, paint, chemicals, STC installation kits, and printed wiring boards. Perform final inspection of products data packs, ID plates and revision levels. Perform calibration of mechanical and electrical tools both internally and externally. Coordinate monthly tool recall. Must be able to input data into spreadsheets and databases. Develop and maintain a working climate which increase personal satisfaction and enhance productivity and quality of work through the achievement of departmental and IS&S objectives. Foster effective working relationships with Quality, Purchasing, Engineering and other personnel at all IS&S locations. Tap into company expertise to assist with problem solving and product knowledge. Requirements • High School education or equivalent • Must be able to read and interpret mechanical drawings, specifications, and work instructions • Must be familiar with mil-spec/industry equivalent workmanship requirements • Must have excellent communication skills in English coupled with strong interpersonal skills. • Minimum of 5 years' experience in a manufacturing work environment; electronic packaging environment is preferred. • Working knowledge in computer sciences to operate in a Windows environment. • Working knowledge of various quality control systems such as ISO9001 / AS9100, 14 CFR Part 21, SPC, TQM, etc. • Working knowledge of J-STD-001 and IPC A-610 Innovative Solutions & Support (IS&S) is an Equal Employment Opportunity and VEVRAA Employer. IS&S is committed to Equal Employment Opportunity and prohibits discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, IS&S is committed to Companywide affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex national origin, protected veteran status or disability.

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

Crescent Quality Control Inspector is responsible for monitoring Production / Operational processes meet / comply with applicable Safety, Quality, Regulatory & Customer standards in a Regulated cGMP Environment. Crescent Quality Control Inspector are responsible cGMP compliance and recording daily quality inspection activities to ensure the manufacture of top-quality, conforming product (against customer specifications). The Quality Control Inspector will support the Business in operating as outlined in the Crescent Way and 3P's: Purpose Process People While building on our Culture of: Doing It Right Doing It Safe Doing It Well Essential Duties and Responsibilities Safety Read and understand the Crescent Safety Playbook - Doing It Safe Ensure Safe and well-maintained Work Environment and conditions throughout all work spaces, facility and surrounding areas Actively participate in Safety Sentinels and engage all staff and employees in cultivating and promoting a Safety-First Culture People Participate in Crescent talent selection, talent development and recognition processes Train and mentor Quality staff. Recognize and develop People so that all have the opportunity to meet their greatest potential while proactively addressing areas of conflict and underperformance Promote a Work Environment where Crescent People are valued and can safely communicate, grow and develop. Productivity Support and review material and workflow processes to ensure Design Quality and maximize production efficiencies Champion the Crescent Culture of Doing it Right, Doing it Safe and Doing it Well and abide by all written and understood policies and procedures Identify, drive and support all Continuous Improvement (CI) efforts All other duties as assigned, including but not limited to the identification and training of an individual capable of successfully completing all stated Key Responsibilities as appropriate to maintain integrity of position for progression planning and coverage during times of absence Quality Support auditing compliance to Crescent QMS to ensure Quality Programs and Systems are intact and meet Regulatory and Customer requirements Support all applicable internal & external (third party, customer and Regulatory) Quality audits and visits Measure, monitor and report Quality KPIs (Process Accuracy) Participate as an active member of the Project Start Up Team to ensure Quality considerations and Design Quality have been implemented prior to new project start Support any new production specifications and requirements and train staff to ensure top quality (in specification) production and QA inspection Support Lean Manufacturing and 5S activities driving Quality CI initiatives Perform batch record review and batch release as required Customer Value Ensure processes, programs and controls are intact and executed against to deliver top quality product to all Crescent customers Financial Safeguard site Process Accuracy KPI to meet established targets Improve organizational efficiency and waste reduction Cultural Competencies Do It Right Doing what is right for our Customers, doing what is right for our Company and doing what is right for our People. Continually improving the quality of our product and services. Monitoring and measuring every key ingredient which could negatively impact our quality. Doing it Right ensures we will always be a Premier Service Provider. Systematic Trainer: willing and able to develop People Process Oriented: able to follow structure where it exists and create (document) structure as needed Resilient: able to deal with the unexpected and not easily flustered Detail Oriented: organized and follows up to ensure Quality tasks to completion Work Ethic: task and big picture focused with a willingness to extend the extra effort Time Management: assess and understands priorities and executes with a sense of urgency Do It Safe Providing a safe environment and supporting our people to reach their highest potential. A safe environment where all forms of risk are assessed and controlled. A safe environment open to new ideas, where our people's opinions and overall well-being count. A diverse environment where everyone fits and can be successful. Self-assured Communicator: clear and concise; balanced talker and listener Conflict Management: can effectively assert and manage conflict and confrontational situations. Holds self and others accountable Temperament: patient, firm and flexible, energetic and enthusiastic, solutions oriented Do It Well Optimizing all our resources to efficiently and effectively perform all tasks well. Our overall productivity as a company is a reflection of the thousands of activities performed well each and every day by everyone. At Crescent, our ability to Do it Well is a real source of pride valued by our customers. Process Oriented: able to follow structure where it exists and create (document) structure as needed Resilient: able to deal with the unexpected and not easily flustered Detail Oriented: organized and follows up to ensure Quality tasks to completion Work Ethic: task and big picture focused with a willingness to extend the extra effort Time Management: assess and understands priorities and executes with a sense of urgency Work Environment / Physical Demands Fast paced environment, requiring Quality Coordinator to adapt to constant changes in schedules, volumes, staffing, and shift requirements Ability to frequently sit, stand for long periods of time, walk, reach with hands and arm's length, climb or balance, stoop, kneel, and crouch Ability to regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds Knowledge, Skills, & Capability Basic Math and Reading Skills The ability to read instructions and perform addition, subtraction, multiplication, division and understand percentages. Decision Making Self-driven to continually monitor the production line and make the decision necessary to improve the work flow and output. Communication Skills The ability to communicate with facts, to balance talking with listening, to use communication to inspire People to achieve results. Motivation Being self-motivated and motived by achieving set targets while continually seeking out opportunities to eliminate waste. Ability to accept and embrace change. Information Process Determining how information fits together and how the information relates to production efficiency. Problem Solving The ability to break a problem down into steps and produce a logical timely solution. Time Management The ability to manage one's time effectively, schedule and prioritize tasks in accordance with the demands of the multi-faceted position in a fast-paced work environment. Systems Usage Pack Manager Qcloud QuickBase Performance Metrics and Trends Safety People Productivity Quality Customer Value Financial Qualifications Education & Experience: High School diploma or GED Ability to use a computer or tablet Ability to communicate effectively through oral and written communications Preferred Qualifications: Regulatory cGMP manufacturing experience Experience with ERP / MRP Systems We will know that the Quality Control Inspector is successful if they can: Support applicable cGMP & Customer compliant Operations Help prevent cGMP or customer specification deviations from occurring By completing this application, you are acknowledging the following: I am at least 18 years of age of older I can perform the essential functions of this position, with or without accommodation I am a US Citizen or otherwise authorized to work in the US on an unrestricted basis Pay Range $20 - $20 USD

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Manheim Sr Mobile Inspector Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % No Work Shift Day Compensation Hourly base pay rate is $20.00 - $30.00/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description This position is classified as remote; however, the employee must reside and perform in the field in the designated local market. A Sr. Mobile Inspector functions as an advanced member of the Manheim mobile inspections team for a designated region with the primary responsibilities of conducting vehicle condition inspections a client's lot. Their core skill is to provide accurate and complete documentation of overall vehicle condition within the parameters of a Manheim inspection. This position will build trust with clients, engage to help them see the value in the Manheim Marketplace, and to request more inventory to be inspected by providing quality and timely inspections. As a Sr Mobile Inspector, this role is expected to work with little guidance and can solve problems with minimal oversight. They will assist with junior inspectors as they gain inspection experience and build client relationships. Primary Duties & Key Responsibilities * Conduct a thorough vehicle inspection at an expert level. * Locate, start, move, inspect, and return vehicles on dealer/clients' lot safely. * Verify vehicle identification and enter accurate vehicle information into the inspection system to correct VIN, mileage, and sub series. * Inspect vehicle equipment and options, documenting results including damage, missing or inoperable items. * Inspect and record vehicle exterior condition, including but not limited to tires, frame, glass, panels, and mechanical components. * Inspect and record the vehicle interior condition, including but not limited to seats, dashboard, and options. * Perform basic mechanical checks on vehicles including powertrain, drivetrain, and electrical components. * Will assist lower-level mobile inspectors to navigate more complex inspections and client relationships. * Prepare and provide daily activity reports for management. * Be able to pivot and adapt to changes in daily appointments to ensure efficiency and effectiveness of each dealer visit * Develop strong knowledge of clients in territory and work together with partners to keep them active with Manheim mobile inspections through regular, pro-active on lot engagement * Receive data and insight from partners and leverage to maximize volume of units inspected on dealer lots. * Represent Cox Automotive as a brand ambassador to provide premier client experience by interfacing regularly core clients and ensuring satisfaction. * Functions as a solid team player and works closely with the Wholesale Specialist team, peers, other Manheim workgroups and auctions. * Utilize SalesForce.com for reporting, lead input and customer performance reviews. * Understanding NAAA Frame/Structure Damage Policy. * Will work in a continuous improvement/Lean environment and encouraged to drive a lean culture. * Maintain production expectations set by the leader. * Visibly demonstrate safety commitment by following all safety and health procedures and modeling the behaviors related to such. Actively participate in support of all safety activities aligned with Safety Excellence. * Other duties as assigned. Required Experience & Specialist Knowledge and Skills * High School Diploma/GED and 5+ years' experience required. * Previous vehicle inspection experience and automotive knowledge is required, body and mechanical. * 2-3 years of any automotive-related experience is strongly preferred. * 1 year of service with Manheim Inspections recommended. * Valid driver's license and safe driving record required. * Travel 100% - Reliable transportation required. Reimbursement program dependent on number of miles drive. * Good communication and interpersonal skills required. * Strong technical aptitude. * Must be detail orientated. * Experience in navigating handheld and other documentation devices preferred. * Motivated to work independently with remote supervision. * Ability to multitask, follow directions and take instruction is required. * Body, paint, and mechanical repair knowledge helpful. * Familiarity with unibody and full-frame helpful. * Ability to lift and hold at least 30 lbs. at waist level for an extended period of time. * Regularly required to stand, walk, talk, and hear. * Frequently required to crouch, bend, and kneel to look at side or underneath car. Strength to lift hood or trunk. Bend while performing audits. Reach inside or underneath vehicle. * Near vision abilities required to find dings and scratches, paint work, hail damage, frame/unibody, other exterior damage and Interior damage. Able to identify exterior or interior colors. * Ability to deal with different lighting (i.e. exterior and interior lighting, natural and artificial light) * Requires physical ability and mental acuity to execute the duties of the position successfully within required timeframes to meet business requirements. Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Precision. Purpose. Performance. At TrekConnect, a subsidiary of Heilind Mil-Aero, we build high-reliability cable and harness assemblies used in aerospace, defense, and other mission-critical applications. As a Quality Control Inspector, you'll play a key role ensuring every product leaving our facility meets the highest technical and reliability standards. This role is ideal for a detail-oriented individual with experience inspecting electrical or mechanical assemblies, using precision tools, and working to IPC/WHMA and AS9100 standards. You'll join a collaborative team that values craftsmanship, learning, and excellence. What You'll Do * Perform incoming, in-process, and final inspections on cables, wire harnesses, and electronic assemblies. * Verify components and assemblies meet specifications, drawings, and manufacturing instructions. * Use precision tools such as calipers, micrometers, force gauges, and torque wrenches for measurement and verification. * Conduct visual inspections using magnification tools and lighting to ensure defect-free workmanship. * Prepare AS9102-compliant First Article Inspection Reports (FAIR) and maintain accurate inspection records. * Collaborate with Production and Engineering to identify, document, and resolve nonconformances. * Support electrical testing of assemblies to verify continuity, insulation resistance, and proper termination. * Maintain high levels of organization, accuracy, and adherence to ISO 9001 and AS9100 standards. Why Join TrekConnect * Be part of a skilled technical team producing high-reliability components for defense and aerospace industries. * Work in a clean, organized, and precision-focused environment where your craftsmanship makes an impact. * Opportunities for career advancement and certification training in quality and manufacturing. * Comprehensive benefits, including: Medical, dental, and vision coverage, 401(k) with company match, PTO and paid holidays, tuition reimbursement, wellness and pet insurance programs, employee discounts and referral bonuses. What You Bring * 2+ years of experience inspecting electrical, cable, or wire harness assemblies in a manufacturing environment. * Ability to read and interpret engineering drawings, schematics, bills of materials, and work instructions. * Proficiency with inspection tools (calipers, micrometers, rulers, torque wrenches, etc.). * WHMA/IPC-A-620 certification (or willingness to obtain). * Experience with ESD, J-STD-001, or fiber optic assemblies is a plus. * Working knowledge of ISO 9001 / AS9100 quality systems. * Strong attention to detail, documentation accuracy, and problem-solving skills. * Adherence to all Safety and PPE Requirements * Must be a U.S. Citizen due to Naval contractual agreements. Physical Requirements While performing the duties of this job the employee is often required to sit, stand, walk, use computers, read, write, type, use copy machines, file paperwork, use telephones, and utilize written and oral communication to interact with clients, co-workers, and customers. Exerting up to 10 pounds of force regularly, and occasionally up to 25 pounds of force to lift, carry, push, pull or otherwise move objects. Specific vision abilities required by this job include close visual acuity to perform activities such as: inspecting manufactured parts (with and without magnification), preparing/analyzing data and figures; viewing a computer terminal; extensive reading. Distance vision, peripheral vision, depth perception, ability to adjust focus and ability to distinguish colors and color variation of physical parts and components, and in documentation such as work instructions and engineering drawings. Reasonable accommodations may be made to enable individuals to perform the essential functions of this job. Working Conditions While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

Bring precision, curiosity, and craftsmanship to a team that builds components trusted by the U.S. Navy. At Interstate Connecting Components (ICC), a division of Heilind Mil-Aero, we take pride in engineering excellence. As a Quality Control Inspector, you'll play a key role in ensuring that every part we ship meets the highest standards of performance and safety. If you have experience inspecting, measuring, or testing mechanical, electrical, or assembled products - or even a background in pharmaceutical or chemical manufacturing where precision is everything - this could be the perfect next step in your quality career. What You'll Do Perform inspection and testing of incoming materials and finished products using precision tools (calipers, micrometers, thread gauges, drop gauges, etc.). Interpret engineering drawings and verify that products meet specifications before they reach our customers. Serve as the liaison between Quality and Warehouse teams, ensuring materials flow seamlessly from receipt to shipment. Conduct and coordinate Customer Source Inspections when required. Support investigations of nonconforming materials and contribute to process improvements. Accurately document inspections and results in our ERP system (Inventory, Order Entry, Purchasing, and Production modules). Assist with continuous improvement projects, developing better inspection methods and tools. Why You'll Love Working Here Purpose-driven work: Your inspections directly impact mission-critical equipment used in military and aerospace applications. Skill development: Get hands-on exposure to diverse products and inspection techniques in a growing organization. Comprehensive benefits package including medical, dental, and vision coverage; 401(k) with company match; PTO and holidays; tuition reimbursement; wellness and pet insurance programs; and referral bonuses.

Job DescriptionDescription: Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements: Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful.

ABOUT THE GROUP From a small store in Turin to a large, internationally recognized group: we are present in 90 countries around the world, with over 5,000 employees and 30 companies, managed directly and indirectly by the Luigi Lavazza Spa parent company, which distribute and market our products and coffee machines. In addition to Lavazza, the following brands are also part of our Group: Carte Noire, Merrild, Kicking Horse, Eraclea and Whittington tea. Joining Lavazza means doing business with passion, knowing that the impact of our work goes beyond the quality of the production chain. We are a big family and are constantly looking for new talents who share our values and can enrich our team. We combine competitiveness with social and environmental responsibility as we create superior quality products available for consumption both at home and out of home, and distributed through all channels: Retail, Foodservice, Office Coffee Service (OCS), and Vending. Our strong, diversified presence enables us to offer consumers and clients perfectly suited solutions, for any occasion and time of day. #LI-KH1 JOB OVERVIEW Lavazza North America, makers of Lavazza Roast & Ground Coffee along with FLAVIA , is leading the coffee revolution. The world's leading Brew-by-Pack refreshment system, the Flavia Brewing System (FBS) created Brew-by-Pack technology in 1983, and the company was the first to pioneer Filter pack packaging to retain freshness, eliminate residual flavour, provide perfect-portion size, and protect contents from sunlight, oxygen, and other harmful elements. Today, Lavazza North America continues that tradition and has added retail whole beans and ground coffee to its portfolio. The purpose of the Operations Quality Inspector role is to ensure that food safety and quality are verified in every step of our process to ensure consumer satisfaction. The Operations Quality Inspector will perform incoming material inspections, along with product inspection of roasting, grinding, and packaging operations. Aid in the resolution of quality matters by liaising with Supply, R&D and Supplier Quality Assurance and manage continuous improvement opportunities through corrective actions. Location: West Chester, PA JOB RESPONSIBILITIES General support to the Operations Quality Manager regarding Lavazza North America's West Chester, PA plant quality systems and procedures. Test our products on the Roasting, Grinding, and all Packaging lines. Conduct food safety inspections and reviews. Control of Non-Conforming product, verify HOLDS, review records, and assist with investigations. Manage the storage of production samples. Assist with customer complaint investigations on the production floor. Maintain incoming material inspections, supplier Non-Conformance creation, HOLDs, and incoming material test equipment. Review production data entry into SAP and QDA for accuracy and completeness. Environmental Swabs, Nitrogen & Compressed Air testing program. Handle sample preparation and shipments to external laboratories. Partner with Supply, Supplier Quality, Quality Lab and Maintenance to ensure on-time and reliable leadership and support is provided. Performs other related duties and assignments as required. Ability to work weekends as needed. Ability to work extended shifts as needed. PROFESSIONAL QUALIFICATIONS High School Degree or GED essential; 2 yr. Technical Degree preferred 0 to 3 years of related or equivalent experience, preferred Demonstrated ability to embrace the culture of Lavazza Group Strong interpersonal and communication skills are required to effectively communicate with other business units at a variety of functional levels Demonstrates strong communication capabilities, both verbally and written, using appropriate Microsoft Office tools, i.e. Word, Excel, PowerPoint, as well as other Lavazza ancillary software Strong, flexible team player that works to meet both personal and organization goals Very high of attention to detail, with ability to multi-task Desire to learn about the inner workings of Quality and Food Safety in the Manufacturing environment BEFEFITS/PERKS Competitive Medical, Vision, Dental Benefits 401K Package Employee Assistance Program Onsite Cafeteria and Gym (West Chester location) Ability to be barista certified Monthly Lunches provided by Lavazza Tuition Reimbursement Performance Development Plans Employee Discounts Flexible business casual dress code - jean friendly! Free coffee, anytime! Lavazza is an equal opportunity employer that is committed to diversity and inclusion in the workplace. Lavazza prohibits discrimination and harassment of any type and affords equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety, or conformance to manufacturer's specifications, FAA accepted/approved data, and AS9100 Quality standards and requirements. This position will be based in Philadelphia, PA Essential Duties and Responsibilities: Duties and Responsibilities: % of Time 1. Performs inspection of aircraft, or parts during modifications, installation, or overhaul and is accountable for the determination of airworthiness, safety, and conformance to FAA accepted/ approved data, Company standards, and AS9100 requirements. 30 2. Interprets and checks engineering drawings for applicability to work scope, both hard copy and electronic, engineering change orders, FAA regulatory procedures, processes, and specifications. 10 3. Reviews engineering technical data for major alterations and major repairs. Documents in detail a description of the work accomplished on a FAA form 337. Determines whether a major repair or major alteration will require a field approval and submit FAA Form 337 to the FAA for a field approval. Responsible for writing Instructions for Continued Airworthiness (ICA's) maintenance work instructions on FAA Form 337. 5 4. Performs review of work orders for completeness, required repair station dedicated forms, and any other mandatory documents. 5 5. Performs research of FAA, EASA, and other foreign civil aviation authorities Airworthiness Directives (AD's). Creates and documents a dedicated compliance list for customer aircraft records. 5 6. Returns aircraft and aircraft parts to service in accordance with 14 CFR Part 43.9 or 14 CFR Part 43.11 by creating and signing an aircraft logbook entry, or completing a FAA Form 8130-3 for aircraft parts. Creates and updates customer aircraft records. 15 7. Interfaces with FAA Safety Inspectors during FAA audits of the Repair Station. 5 8. Supervises the work performed on site, and is responsible for ensuring that the appropriate work instructions are followed, and is responsible for the overall quality of the work performed for travel events (work away from the repair station). 5 9. Liaise with company Technical Representatives and Customer Support Managers for all matters relating to Quality concerning customer aircraft or parts. 5 10. Performs data collection and performs conformity inspections during the development of a STC project. Performs conformity inspections to fabricated parts by a vendor or in-house to ensure part meets engineering design requirements. 5 11. Prepares data package and presents to FAA for any aircraft certification changes. 5 12. Performs other duties and fulfill other responsibilities as assigned. This includes working as an aircraft maintenance technician if required. 5 TOTAL: 100% Qualifications for Position: Education High school diploma (or equivalent) College degree or Technical writing a plus Experience Minimum 5 years hands-on quality control inspector on turbine helicopters in a Part 145 Repair Station environment 5 years hands-on turbine helicopter maintenance experience AgustaWestland A109/A119/AW139/AW169/AW189 maintenance experience is a plus Competencies & Attributes Technical knowledge in the fields of mechanics, hydraulics, electricity, avionics, sheet metal, rigging, instruments, test flights, etc. to determine safety, airworthiness, conformance, and sign off work in aircraft records to meet the requirements of the FAA Federal Aviation Regulations Must be pro-active and team and detail oriented. Must have good working knowledge of FAR Part 145 and related areas. Must possess experience in Microsoft Office suite. Must be able to work independently Ability to travel occasionally. Ability to work weekends and/or be on-call. Licensure/Certification FAA A&P license a must, and Inspection Authorization (IA) rating is a plus Equal Opportunity Employer/Vet/Disability