Quality inspector jobs in Menomonee Falls, WI - 240 jobs

Under the direction of the Quality Lab Supervisor, with guidance from the Quality Lab Tech Lead, the Quality Assurance Lab Technician is responsible for the completion of testing and inspection, dimensional analysis and support of other departments within HellermannTyton. This position requires the Technician be able to complete product/process inspections in a product environment as well as a lab environment while managing files and software. Overtime will be required including some weekend hours. This position will also maintain HellermannTyton's TS16949/ISO14001/EMS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Understand Customer Expectations as they relate to Product Quality Thrive in and help support a Team Atmosphere Help support the HellermannTyton Team by mentoring Operators regarding Quality of Product Perform 1st Piece Inspection of manufactured product Perform in-process inspection of manufactured product Perform Product specific tests including but not limited to tensile Perform moisture analysis on manufactured product as well as incoming Verify Material Certification and Approve raw material Enter and edit SPC data in the SPC computer file File all QA records and samples (obsolete and current). Use incoming color chip samples to verify colorant in receiving Handle non-conforming material isolation and documentation Perform a dimensional layout referencing the HellermannTyton drawing Use SPC software Record all inspection and test data. Weigh parts. Use control plans. PPAP and PPC testing. Assist in maintaining HellermannTyton's Quality and Environmental certification by supporting: Corporate policies, procedures, work instructions and required documentation. Other Functions Become a "Go To" person for production personnel regarding Quality of Product Determine "Clean Point" when a non conformance is found Support LEAN Work Environment Other duties may be assigned. Key Competencies Ability to read Blue Prints Ability to use basic hand meausring tools Have basic math skills Ability to communicate effectively both written and orally Basic computer skills a plus Injection Molding knowledge a plus Qualifications (skills, knowledge, experience) High school diploma or equivalent required. 1 year prior lab experience preferred Good math and communication skills. Computer skills - Windows, Excel Good vision. Mic and caliper knowledge preferred. Problem solving skills. Blue print reading skills preferred. Excellent verbal & written communication skills. Bend over in order to lift 50lbs. Ability to lift/push/pull up to 50 lbs. All employees entering the Manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) for their position. Wearing your Personal Protective Equipment (PPE) is a condition of employment. Ability to work daily and weekend overtime to meet the needs of the department and customer. #LI-MS1 #Onsite By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

We are currently searching for an experienced and highly analytical quality inspector to join our production department. As the quality inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Primary Duties and Responsibilities Assist in the corrective and preventative action program and its effectiveness Assure verification of process control Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Resolve quality-related issues in a timely manner. Recommend improvements to the production process to ensure quality control. Measure product dimensions, examine functionality, and compare the final product to the specifications. Read blueprints, plans, and specifications to understand the requirements of products and services. Provide Quality Management System training Assist in Supplier Discrepant Material issues Maintain the Document Control System Maintain the calibration system Maintain inspection records Collection of quality related documentation Assist in companys safety program documentation to ensure adherence to outlined OSHA requirements and national standards Assist in internal training program documentation and development to ensure training adherence at all levels of the organization TECHNICAL SKILLS Use of Microsoft Office, and ERP systems. QUALIFICATIONS Bachelors degree or equivalent experience Minimum of high school diploma Excellent written and verbal communication skills Working knowledge of ISO 9001 work environment Demonstrated organizational skills Demonstrated ability to work under pressure and manage many tasks/projects simultaneously Demonstrated ability in analytical thinking Ability to present complex or difficult messages clearly and persuasively MATHEMATICAL SKILLS Basic mathematic skills required. REASONING ABILITY Ability to define problems collects data, establish facts, and draw valid conclusions CERTIFCATES, LICENSES, REGISTRATIONS None required PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must occasionally lift and or move up to a specified pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. PIee2c92cd492c-31181-37356209

Busy company is looking for an energetic candidate to manage perform final inspection of product and package it for shipping. This is a fast paced position, and candidates must be able to lift and move large rolls of material. Verify that parts meet specifications on the blueprint Measure parts as final check before shipment Bag large rolls of material Box product Kit package parts RequirementsREQUIREMENTS OF THE PACKAGING / INSPECTION POSITION: Ability to lift 70 pounds Read basic blueprints Measure product with ruler, micrometers, and calipers BenefitsHealth Dental PTO Holiday

The Quality Technician ensures that products and processes meet established quality standards by conducting inspections, tests, and audits. This role involves collaborating with production, engineering, customer service, and sales teams in identifying quality issues, and assisting with implementing corrective actions to maintain compliance with company and regulatory requirements. This individual will report to the Quality Supervisor and be a strong partner to our operators and supervisors on the floor. This person will have to captivate and communicate with all departments to address issues, propose resolutions, and see through the quality vision for the company. They will also maintain proper reporting, documentation, and any other necessary routines for the department. Essential Duties and Responsibilities This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Read and interpret blueprints, engineering drawings, and technical specifications to verify that products meet required standards. Use standard measurement tools and equipment (e.g., calipers, tape measures, micrometers, gauges) to check and document product dimensions. Perform visual and dimensional inspections on incoming materials, in-process production, and finished goods. Record inspection results accurately and communicate nonconformances to appropriate personnel. Support Shipping & Receiving by inspecting incoming and outgoing products when required. Maintain and organize quality logs, including Nonconforming Material (NCM) records, Returned Material Authorization (RMA) records, and scrap tracking logs. Assist in monitoring scrap trends and providing relevant inspection data to production. Track and maintain the calibration status of measuring tools and equipment. Participate in internal audits to verify compliance with established procedures, quality standards, and customer requirements. Assist with quality documentation activities such as PPAPs or first article inspections, when needed. Support training efforts by helping production employees understand quality standards and proper inspection methods. Participate in problem-solving activities to help identify root causes of quality issues and support corrective actions. Work independently to perform inspections, maintain logs, and resolve routine quality issues with limited on-site supervision. Communicate end-of-shift updates, nonconformances, and outstanding issues to the incoming shift and QC leadership. Coordinate with operators and supervisors to ensure quality standards are maintained throughout the shift. Provide flexible inspection support across multiple production departments as required. Maintain knowledge of quality standards and best practices through training and professional development. Perform other quality-related duties as assigned. Work in accordance with company policies, mission, and values at all times. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Strong attention to detail and commitment to customer experience. Possesses ability to use gauges such as calipers and micrometers to measure products. Able to read and understand Engineering drawings and blueprints. Effective communicator to various audiences using verbal and written skills. Education and/or Experience High school diploma or equivalent required. Associates or Bachelor's Degree or equivalent experience is a plus. 3 or more years working in a manufacturing operations environment. 1 or more years' experience working with quality assurance/control is preferred. Experience with Microsoft Office software such as Windows, Word, Excel, PowerPoint, Teams, Outlook. Experience with Global Shop Solutions ERP system is a plus. Schedule2nd shift: Monday - Thursday 2:45pm-12:45amBenefits Medical (Anthem) Dental (Anthem) Vision (Anthem) Life Insurance Supplemental Insurance 401k with matching Paid Holidays Paid Time Off Paid Parental Leave Incentive Plan Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Frequent: Seeing Hearing Standing, walking or mobility for long periods of time Lifting, pulling, or pushing up to 50 pounds without assistance Climbing, stooping, or kneeling Fingering, grasping, feeling, typing Activities are performed on a routine basis using personal protective equipment (PPE) such as glasses, shoes, and earplugs. At times, face shields, aprons, suits, and other PPE may be required. Employee will operate various hand tools, power hand tools and machine tools. Note: The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. It should not be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Work Environment Normal office and factory environment. Slight exposure to dust, noise, fumes, and oils is present. We are great people that make a great product! At Tanis Brush, we design and manufacture various industrial and utility brushes that help other businesses thrive. Our brushes are used for cleaning, sorting, painting, finishing and protecting equipment, machinery, parts and many other applications. Since 1987, Tanis has been known for our vast selection of brush products, resourceful specialty design, engineering capabilities, and exceptional customer service. Tanis Brush provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, ancestry, national origin, citizenship, sex or gender (including pregnancy, childbirth, and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, religion, age, disability, genetic information, service in the military, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.

Are You Ready to Grow in Your Quality Inspection Career? What We Offer: Competitive pay Health, Dental, and Vision Insurance 401(k) with company match Tuition Reimbursement 10 Paid Holidays + PTO Life Insurance & Short/Long-Term Disability At Machining Concepts, we're a fast-paced job shop where every day brings something new. You'll work with a wide variety of materials and parts, gaining valuable hands-on experience in a supportive, team-oriented environment. We're seeking a Quality Inspector for our 1st shift team. If you're looking for growth, variety, and a challenge, this is the opportunity for you! What You'll Do: The main function of the Inspector will be to verify conformance to drawing and specifications. Specific responsibilities will include the following: Conduct first piece inspections when requested by manufacturing personnel. This inspection will take place in accordance with Machining Concept's First Piece Inspection procedures and work instructions. Conduct receiving inspection functions in accordance with Machining Concept's Receiving Inspection procedure and work instructions. Conduct final inspection functions in accordance with Machining Concept's Final Inspection procedure and work instructions. Audit in-process inspections when directed. Report results of all inspections to machinists and plant supervision. Initiate NCRs for out-of-tolerance conditions. Conduct casting and weldment layout inspections as directed. Create accurate inspection reports as required. Set up inspection gages when requested by machinists. Requirements What We're Looking For: Education: This position requires a high school diploma or GED. Experience: 3 - 5 years of experience in quality inspection required, preferably in a machining or fabrication environment. Skills and competencies: Strong background in dimensional inspection and machining method. Able to use a variety of hand inspection tools to conduct inspections. Must be able to interpret manufacturing drawings and understands GD&T. Ability to conduct casting and weldment layout inspections is a requirement. Ability to operate a CMM. Strong interpersonal and communication skills are a must. Computer skills are required.

Who We AreFor over 100 years, Spincraft has been utilizing metal spinning and forming to solve its customers' greatest manufacturing challenges. Leading in metal forming solutions partnered for Aerospace, Defense, Energy, and more, Spincraft's mission has formed a division, Engineering Technologies Group (ETG), a part of the global Standex International team, with four locations worldwide. What You'll Do Reporting to the Manufacturing Manager, the Inspector is responsible for inspecting raw materials, in-process components, and finished products to ensure they meet specified standards and meet customer requirements. This role uses a variety of inspection tools and techniques to identify defects and document results, supporting continuous quality improvement in the manufacturing process. Technical Job Review job routing, quality log requirements, and interpret sketches to determine dimensions and tolerance specifications for features requiring inspection Perform independent inspections, validations, and/or verifications of assigned items to ensure compliance and documentation of nonconforming material Inspect product for surface defects, such as scratches, dents, cracks, workmanship, and weld quality Perform inspections of simple GD& T hardware using a variety of common inspection tools which may include various micrometers, bore gages, depth gauges, dial indicators, drop indicators, height gauges, etc. Use basic GD&T concepts such as Straightness, Flatness, Circularity, Cylindricity, Perpendicularity, and Parallelism as needed Use a variety of common inspection tools (OD&ID micrometers, calipers, pi tapes, thread gages, point mics,profilometers) to verify sketch/print dimensions of components Read and interpret work orders, blueprints, and specifications to determine machine setup, type of material or part, quantity, and finish dimensions Perform standard operations for established programs on the Coordinate Measuring Machine (CMM), FARO Arm, and scanning equipment Receive inspection of product, hardware, or raw material to ensure PO requirements are met Load and unload parts into inspection gauges to verify and document conformance May be asked to perform higher level inspections while under supervision May trim, sand, and drill parts, using shop equipment Perform daily/weekly operator maintenance on equipment/tools (oil, clean, and inspection Accurately execute PCS (Process Control Sheets) and provide feedback when revisions are needed Assist Engineering with the implementation, creation, and maintenance of PCS Document actions by completing production and quality logs as needed Accomplish organization goals by actively exploring opportunities to improve Safety, Quality, Delivery, and Cost. (SQDC) Train others by openly sharing information, knowledge, and expertise with the team Complete job assignments as directed by Quality or Manufacturing Manager Attend meetings, trainings, and participate in audits as directed Safety Maintain safe operations by adhering to safety procedures and regulations Comply with all company rules including company safety policy and all federal, state, local, and other safety regulations and practices Use personal protective equipment and devices provided for machinery, equipment, tools and processes, when defined in PCS, Company Safety Policy, Job Safety Analysis or Management direction Report all unsafe conditions, accidents and injuries immediately to management Housekeeping Actively participate in 6S and lean activities as outlined by the Company Maintain equipment by completing preventive maintenance requirements, following Company instructions Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs Store and maintain tools, equipment and gauges as defined by company standards Keep work area clean and organized to company standards/expectations Daily cleaning and sweeping of work area, tools and equipment Empty trash and waste as needed Personal items removed from workstations What You'll Bring High school diploma or general education degree (GED) is required Minimum 3 years related experience and/or training, or equivalent combination of education and experience. Forklift experience is preferred Certified Level I and Level II nondestructive testing preferred Demonstrate working knowledge with reading and understanding blueprint requirements, and ability to interpret geometric dimensions and tolerances (GD&T) Reliable transportation Strong interpersonal and problem-solving skills Ability to effectively manage time, multi-task, and pay close attention to details Self-motivated with the ability to work independently and as part of a team Capable of following directions Take responsibility for achieving production efficiency, quality of product and reports discrepant material immediately Demonstrate customer focus by seeking out, understanding, and responding to the needs of both internal and external customers Maintain a positive attitude and communicate openly and honestly with others Solve problems proactively and contributes to continuously improving the process/product Ability to lift up to 50 lbs. and stand for extended periods Comfortable working in environments with noise, heat, or dust Regularly required to move, sit, and bend for various hours throughout the day

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently seeking a Quality Inspector II to join our facility in Cudahy, WI. The Quality Inspector II position reports to the Quality Leader and is an integral part of a dedicated team who take great pride in helping ATI achieve production and quality results. As a Quality Inspector II, you will inspect and examine assembled parts and products, such as forgings for flaws or defects to ensure that all required standards and specifications have been met and approved to prepare parts for shipment. A successful Quality Inspector is attentive and detail oriented, able to work independently and collaboratively within a team environment and is motivated to quickly learn about ATI's products, processes, and quality standards. Responsibilities Read and comprehend dimensional drawings. Use multiple types of standard measuring instruments, special gauges, fixtures, templates, and others in performing assigned duties. Check forgings visually and dimensionally, as detailed on the inspection methods sheets. Report non-compliance to department supervision as directed. Complete part identity marking, record dimensional data, and prepare reports as required.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently seeking a Quality Inspector II to join our facility in Cudahy, WI. The Quality Inspector II position reports to the Quality Leader and is an integral part of a dedicated team who take great pride in helping ATI achieve production and quality results. As a Quality Inspector II, you will inspect and examine assembled parts and products, such as forgings for flaws or defects to ensure that all required standards and specifications have been met and approved to prepare parts for shipment. A successful Quality Inspector is attentive and detail oriented, able to work independently and collaboratively within a team environment and is motivated to quickly learn about ATI's products, processes, and quality standards. Responsibilities Read and comprehend dimensional drawings. Use multiple types of standard measuring instruments, special gauges, fixtures, templates, and others in performing assigned duties. Check forgings visually and dimensionally, as detailed on the inspection methods sheets. Report non-compliance to department supervision as directed. Complete part identity marking, record dimensional data, and prepare reports as required.

Job Title: Quality InspectorJob Description We are seeking a meticulous and experienced Quality Inspector to ensure our products meet the highest standards of quality. The ideal candidate will have a strong understanding of specifications and blueprints, and a keen eye for detail to interpret dimensional, physical, functional, and visual requirements. Responsibilities * Inspect products for various quality issues and document findings per ISO and FDA requirements within the ERP system. * Perform part inspections and measure dimensions of incoming, in-process, first piece, and finished workpieces. * Utilize various precision measuring instruments, including optical comparators, CMM or vision machines, along with templates and fixtures. * Assist with Corrective and Preventive Actions (CAPA), Non-Conformance Reports (NCR), and manage non-conformance issues by collecting data and entering it into spreadsheets and databases. * Support the disposition of nonconforming products, whether internal or customer returns, through the RMA procedure. Essential Skills * 3 years of quality inspection experience. * Proficiency in ISO standards. * Experience with CAPA and NCR processes. * Skilled in using micrometers and calipers. Additional Skills & Qualifications * Experience in a medical device manufacturing setting is advantageous. Work Environment The position involves working within a medical device manufacturing and office setting. Training will occur on the 1st shift, with a transition to the 2nd shift thereafter. The 1st shift operates from 6:00 am to 2:30 pm, Monday through Friday, and the 2nd shift runs from 2:30 pm to 1:00 am. There is potential for overtime, contingent upon workflow, with an expected increase in business that may require additional hours per week. Job Type & Location This is a Contract to Hire position based out of Kenosha, WI. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kenosha,WI. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Quality Control Inspector - 1st Shift, 7am-3:30pmPay: $20-$24/hour (Based on Experience) At our client, they don't just build components-they ensure quality at every step. As a Quality Control Inspector, you'll play a critical role in maintaining the excellence our customers depend on. If you're detail-driven, reliable, and ready to grow within a fast-paced manufacturing environment, this is your opportunity to make an impact. We are seeking a meticulous and motivated Quality Control Inspector for our 1st shift team. You will be responsible for performing Incoming, In-Process, and Final Inspections, using traditional metrology tools to ensure components meet required specifications and quality standards. Essential Duties and Responsibilities: Inspect alignment and dimensions of parts using ID/OD micrometers, height stands, and calipers Perform manual drafting to document dimensional requirements Verify parts against product specifications, drawings, and part lists Visually examine parts and document production results Ensure all inspections and records comply with the Quality Management System and Customer Requirements Confirm assembly completeness and identify missing or incorrect hardware Participate in ongoing training and maintain equipment certifications Required Competencies & Skills: Proficient with manual inspection tools (Micrometers, Calipers, Height Stands) Ability to read and interpret manufacturing drawings and blueprints Strong verbal and written communication skills Solid mathematical knowledge including geometry, trigonometry, fractions, decimals, and layout functions Excellent critical thinking, problem-solving, and time management abilities Adaptable and able to work both independently and as part of a team Preferred Qualifications: Valid driver's license Prior experience in a manufacturing or quality control environment Exceptional attendance record (required) Completion of Overhead Crane and Forklift Training (training provided upon hire if needed) Physical Requirements: Frequent standing, walking, climbing, stooping, kneeling, bending, and lifting (up to 50 lbs) Frequent use of hands, tools, and inspection equipment Occasional talking or hearing in a production setting

The Quality Inspection conducts and oversees the inspection of all raw materials, manufactured parts/components, and finished goods to ensure compliance with all contract specifications and quality program requirements according to Company and ISO standards. The Quality Inspection Lead receives general work assignments under limited supervision and resolves most problems independently. Although their work is subject to additional inspection, the Quality Inspection Lead generally oversees the final check on incoming items, work-in-process (WIP), and finished goods. As such, this individual has the authority to quarantine or stop the manufacture or shipment of nonconforming materials, parts, or finished pieces. The Quality Inspection Lead is also expected to be an active participant in support of the Company's Six Sigma activities and adhere to its principles. Essential Duties and Responsibilities include the following with other duties assigned as necessary: Analyses inspection jobs and directs or assigns work as necessary. . · Assist with the identification and development of required procedures and processes related to · the Quality Management System. · Participates and aids in cross-training program for quality and inspection technicians as needed. Reviews work orders (written or verbal) and determines specific inspection requirements/needs. Identifies, quarantines, and documents non-conforming parts or materials detected during incoming, WIP, or final inspection activities. Works directly with suppliers for replacements/refunds, and issues corrective actions (as needed). Prepares and processes inspection documents (packets, radiator id tags, etc.) for products. Conducts final inspection or audit of finished goods and ship-loose components to ensure conformance with order. Oversees maintaining all inspection records relating to individual inspection activities. Makes recommendations to management for ordering, product, or other changes in accordance with Company and customer requirements and specifications. Ensures that all assigned areas and equipment meet 6S standards. Oversee customer PPAP requests. Oversee operations tool calibration program. Assist in internal ISO 9001:2015 audit program. Understand and operate Romer/CMM operations. Participate in team meetings as required (safety, problem-solving, employee events, etc.) Reasonable accommodations may be made for individuals with disabilities to perform essential duties. Maximum lifting requirement (pounds): 75 (infrequently, assisted lifting) Working at heights off the ground up to: 25 feet. Work Environment: Exposure to: Fumes, airborne particles, wet/humid (non-weather) conditions, toxic/caustic chemicals, moving mechanical parts/equipment, inclement weather conditions. 3 or more years' experience with quality systems, as well as contractual quality and ISO requirements; ability to read blueprints/receiving documents Familiarity with statistical process control (SPC) and similar techniques. Must have effective PC skills to include MS Office software such as Excel, Word and Outlook. Experiential: 3 or more years of inspection/Quality Control or related manufacturing experience. Coordinate Measuring Machine (CMM) with PC-DMIS experience is strongly preferred. Experience with PPAPs (Production Part Approval Process) strongly preferred. Educational: An associate degree in manufacturing or related technical area is desirable. Certificates, Licenses, etc.: ASQ certification is highly desirable; forklift operator certification is desirable. A driver's license is required.

SURESTAFF is immediately hiring for a detail-oriented Quality Inspector for a large company in Pleasant Prairie, WI. A successful Quality Inspector should have excellent troubleshooting skills, have experience inspecting product in a fast-paced industrial manufacturing environment, and be able to ensure that product consistently meets quality standards and guidelines. SURESTAFF is invested in their team members! All temp-to-hire employees are offered competitive compensation ($18/hr.) as well as a benefits package including health insurance (medical, dental, and vision). Available shifts include: 9am-530pm (Mon-Fri) Responsibilities of the Quality Inspector: -Perform inspections as defined for each customer -Complete daily process audits -Keep records in Excel spreadsheets for the completed audits -Take pictures of product as required and keep inappropriate storage location. -Train to become a quality system auditor and complete scheduled quality system audits based on ISO9001 -Use SAP for certain quality related tasks -Follow work instructions and ensure instructions are up to date -Assist with training as needed for quality and other employees -Assist with root cause analysis when needed for quality issues from the customer and internally -Cross train in all quality auditor process including other Louisville work sites. Required Qualifications of the Quality Inspector: -Problem solving abilities -Strong Communication and interpersonal skills -Proficient in inspection techniques -Can easily apply computer skills to communicate audit/inspection results -SAP, Latest MS Office Applications -Excellent accuracy -High School Diploma or Equivalent -Ability to work long, flexible hours including overtime Physical Demands & Work Environment: -Ability to bend, pull, push, lift, and traverse stairs -Ability to lift up to 50 pounds -Ability to be able to walk or stand on the job for up to 12 hours or more -Ability to use a pallet jack and move materials if needed -Manufacturing environment About Surestaff At Surestaff, we are dedicated to helping individuals unlock their career potential through meaningful job opportunities. As a leading staffing agency in the light industrial and manufacturing space, we pride ourselves on connecting talent with top employers across the Midwest and Southeast. With an estimated yearly revenue of $295 million, Surestaff was recently named one of the largest staffing firms in the U.S. by Staffing Industry Analysts (SIA). We understand that finding the right job is about more than just a paycheck - it's about finding the opportunity that fits your skills, goals, and lifestyle. Here are the benefits you'll enjoy when you partner with us: Access to a wide range of job opportunities Competitive pay Health and Wellness Programs (including EAP) Medical benefits including medical, vision, dental, and prescriptions Electronic weekly pay Employee Advocacy & Personalized Job Support Surestaff also follows all applicable state and local laws regarding sick time, paid time off, and retirement savings programs. Surestaff is an equal opportunity employer. Notice Regarding the Use of Artificial Intelligence in Employment DecisionsIn accordance with state mandates, we are providing this notice to inform all applicants and employees that artificial intelligence (AI) tools may be used at various stages of our employment processes. This may include recruitment, screening, hiring, promotion, or other employment?related evaluations.AI tools may assist in reviewing application materials, assessing qualifications, or supporting decision?making. These tools do not replace human judgment; rather, they are used to support consistent and efficient evaluation.Our commitment to speed-to-hire means we work efficiently to get you placed in the right role, fast. If you're ready to take control of your career, explore exciting opportunities, and gain experience that lasts, then Surestaff is the place for you. Let's get started today!

Pay up to $25/hr. plus the shift differential of $1/hr. for second shift. Seda North America is looking for a Quality Inspector to join our 2nd Shift Quality Department (Monday - Friday 3pm to 11pm)! Your daily tasks of verifying that our manufactured products meets the rigorous requirements of our customers, the Seda QMS (Quality Management System), and established Food Safety Standards in the industry. As a key partner to operations, communication is essential for success in this role. 1. Specific Duties Inspect products using gauges, scales, and other tools prior to shipment Generate spreadsheets for data collection Perform line check inspection in the manufacturing areas. Non-conforming Material - Document product status, records and summarizes data Maintains the “Quality Hold” area 2. Qualifications: Organizational Skill Problem Solving/Analytical Time Management High School Diploma or equivalent; Associate or higher degree preferred At least 1 year in quality focused role preferred At least 4 years of experience in a similar quality focused role 3. Physical Demands (Required for Essential Duties & Responsibilities) Must be able to remain on feet standing and walking for 8-hour shift Comfortable working in noisy and loud environments Wear all required PPE and follow safety practices as instructed We encourage you to explore Seda at: ************************** What does Seda Offer? Great Place to Work Certified! A Strong, Helpful Team Culture! On the job training Opportunity to grow with a Company that values its employees! Exceptionally Clean Environment - Food Safety Compliant Climate Controlled - Comfortable work environment Competitive wages 10 Paid Holidays Paid PTO Comprehensive benefits package including Medical, Dental, Vision Company paid Basic Life and STD/LTD Disability Insurance Employee Assistance Program Flexible Spending 401(K) Retirement Plan with match, upon hire Education Assistance Community involvement with opportunities to volunteer with the Seda Family! This job description outlines primary responsibilities but is not all-inclusive; additional tasks may be assigned as needed. Seda North America provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetics or protected veteran status. In addition to federal law requirements, Seda North America complies with applicable state and local laws governing nondiscrimination in employment. Second (2nd) Shift Monday through Friday 3pm to 11pm

Job DescriptionJob Title: Quality Inspector Reports to: Quality Assurance Manager Company: VistaApex Solutions VistaApex Solutions is a purpose-driven, clinician-focused healthcare platform bringing together leading dental brands, including Vista Apex, PerioProtect, and PerioSciences. Our mission is to develop meaningful products that enhance clinicians' treatment options and improve patient outcomes. With a value-added approach across R&D, operations, and customer experience. We empower clinicians to deliver confident, consistent, and elevated care. At our core, we operate through five foundational pillars- Product Development + Clinician Involvement, Treatment Refinement + Simplified Workflow, Expanding Innovations + Trusted Partnerships, Inspired Foresight and Quality Assured + Personal Connections -guiding our approach to innovation, collaboration, and long-term partnership.Position Overview The Quality Inspector is responsible for performing inspections and quality checks during various stages of the manufacturing process to ensure products and raw materials meet established specifications and regulatory standards. This role is integral to maintaining the high-quality standards of VistaApex Solutions, with a primary focus on testing raw materials and finished goods. In collaboration with cross-functional teams, the Quality Inspector supports continuous improvement efforts, contributes to maintaining compliance with applicable quality and regulatory requirements (e.g., ISO 13485 and FDA 21 CFR Part 820), and may assist in broader quality assurance activities. Responsibilities may also include initiating Nonconforming Material Reports (NCRs) and other quality-related documentation as directed by the QA Manager. This position plays a key role in upholding product integrity, ensuring traceability, and supporting company goals for regulatory compliance and customer satisfaction. Key Responsibilities Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies as per Inspection Plans and Specifications Monitor and comply with quality requirements in accordance with company quality assurance policies and customer specifications Conduct inspections at First Article, in-process, in-coming and completes the final inspections Document and report inspection findings and results; maintaining corresponding records Work with other company personnel to resolve inspection questions Perform other miscellaneous duties as assigned by QA Manager Follow all clean-up and housekeeping procedures Qualifications Strong organizational skills with keen attention to detail and the ability to understand the broader impact of process steps. Effective time management skills with the ability to prioritize tasks and meet deadlines in a fast-paced environment. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Experience using precision inspection tools such as calipers, pin gauges, and other measurement equipment. Strong interpersonal and communication skills; ability to collaborate cross-functionally with production, engineering, and quality teams. Demonstrated ability to identify process deficiencies and contribute to the development or revision of procedures for continuous improvement. Education and Experience High School Diploma or GED required. Additional technical training or coursework in Quality Assurance, Manufacturing, or a related field is a plus. 1-2 years of experience in a Quality or Regulatory role preferred. Prior experience working within an ISO-regulated environment (ISO 13485 or similar) is highly desirable. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be able to sit, stand, walk, bend, and reach for extended periods throughout the workday. Ability to lift and carry up to 30 pounds occasionally. Manual dexterity required for operating inspection equipment such as calipers, pin gauges, and microscopes. Visual acuity is necessary for performing detailed inspections and reviewing technical documentation. Must be able to wear required PPE (Personal Protective Equipment) such as gloves, safety glasses, and lab coats as needed. Occasional use of ladders or step stools to access materials or equipment. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work is performed in a combination of production floor, quality control lab, and office settings. May be exposed to moderate noise levels, temperature fluctuations, and airborne particles consistent with a light manufacturing environment. Work includes exposure to regulated manufacturing processes requiring strict adherence to cGMP and ISO 13485 standards. Must follow company safety procedures and applicable OSHA regulations at all times. Collaboration across departments is frequent; must be comfortable working in both independent and team environments. Benefits We believe in supporting our employees both inside and outside of work. Here's what you can expect when you join our team: Comprehensive Health Coverage: Medical, dental, and vision insurance for you and your dependents. Time Off: Generous PTO policy and paid holidays Retirement Plans: 401(k) with company matching to help you plan for the future. Wellness Support: Mental health resources and wellness programs. Team Connection: Regular team events, retreats, and gatherings to build community. As part of our hiring process, final candidates will be required to undergo a background check. This process may include a review of criminal records, employment and education verification, and other checks relevant to the responsibilities of the role. Results will be evaluated in accordance with applicable laws and company policy. Powered by JazzHR S5vhV9Vm82

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to provide technical solutions on our Manufacturing Quality Team. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Year after year, our team continues to make significant breakthroughs in the industry. We're just getting started. To learn more about our story click HERE. Your Role on Our Team The Quality Technician II will be responsible for ensuring the quality of all products produced meet agreed upon standards and expectations. The Quality Technician II will demonstrate the ability to put people and process first at all times to ensure Milwaukee Tool's unwavering devotion to a robust quality culture. This position is the standard bearer for who we are and the obsession we have with being the market leader. A Quality Technician II is charged with overseeing the quality, safety, productivity, and training linked within their assigned team. The ability to effectively communicate to the team is crucial to the continued success and development of the personnel and equipment managed. Through resourcing of timely product inspections, and directing of plant quality technicians, the Quality Technician II position is tasked with the short- and long-term success of the Manufacturing Quality Team. Shift: 3rd Shift, Sunday-Thursday 11:00pm-7:00am You'll be DISRUPTIVE through these duties and responsibilities: * Key contributor of the manufacturing quality assurance organization by performing daily audits of the manufacturing process to ensure all products and processes are abiding by the specifications and standards set by the leadership teams * User of test lab equipment such as tensile/torsion testers, hardness testers, metallurgical equipment (cut/mount/polish, optical and stereo microscopes), and other various test equipment * Operate CMM and VMM measuring machines and user of handheld devices such as calipers, micrometers, height/snap/pin gauges and other various devices to support metrology needs * Initiate Quality System documentation, such as Inspections, Non-Conforming Material Reports (NCMR's), quality alerts * Contribute to the creation of work instructions * Complete dimensional inspections of incoming raw material * Ability to navigate document repository web page to locate inspection reports, blueprints and other quality documents * Participate in gage R&R studies as needed * Mentor Quality Technician I personnel and provide guidance to manufacturing operators * Effectively communicate across shifts and weekend work within internal teams and cross-functional teams * Support Operator instruction/ training on new procedures or techniques * Perform basic math; fraction to decimal conversion, arithmetic and units of measure conversion, and basic statistics * Consciously abide by all safety policies and procedures to create a safe working environment * Other duties as assigned * The TOOLS you'll bring with you: * High School or GED diploma * 2+ years of previous quality experience or 5+ years of manufacturing experience * Basic understanding of Microsoft Office Suite, Excel and Microsoft Outlook * Excellent oral and written communication skills * Ability to navigate technology such as computer, tablet and printer systems * Ability to work independently and as part of a team * Ability to read blueprints * Problem solving abilities, interpersonal skills, and the ability to manage interruptions * Proven hands-on skills and ability to follow detailed instructions is a huge plus * Other TOOLS we prefer you to have: * Understanding of metrology fundamentals, GD&T * We provide these great perks and benefits: * Robust health, dental and vision insurance plans * Generous 401 (K) savings plan * Education assistance * On-site food and coffee service * And many more, check out our benefits site HERE Milwaukee Tool is an equal opportunity employer.

Temp To Full-Time Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality, and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner.

SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS

Parallel Employment Group, in partnership with a Fort Atkinson manufacturing company, is seeking a qualified Quality Assurance Tech to join the team. $17-$19 per hour; based on experience 2nd shift Role, training on 1st shift. The Quality Inspector is responsible for ensuring that all products meet required customer specifications, and quality standards. This position performs inspections on first pieces, in-process, and final materials to verify accuracy and prevent the release of defective products. Essential Job Functions and Performance Standards for Quality Inspector Technician Verify documentation and certification requirements for products received from suppliers, and notify the appropriate individuals of any discrepancies or deviations from drawings or purchase order requirements. Perform first-run inspections from manufacturing to ensure all quality specifications are met and accurate before completing the run. Compare results of inspections and tests to the company's quality standards. Follow all safety protocols by using proper PPE and maintaining housekeeping standards. Perform assigned routine visual inspections and other specified tests. Work Environment Quality Inspector Technician may be required to stand, sit, or squat for extended periods of time. The role involves lifting up to 50lbs at a time, and good hand dexterity is essential. Requirements Experience For Quality Inspector Technician Experience using hand-held and various measuring devices for product inspection. Other Ability to work independently with minimal supervision. Lift up to 50 lbs and stand 8-10 hours per day #ind456

Acute Care TechnologyAt ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $20.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.