Quality inspector jobs in New Berlin, WI - 272 jobs

The Operator - Visual Inspection will work at our client's Manufacturing site in Kenosha County WI, where parenteral products for domestic and international markets are manufactured and packaged. The primary purpose of this role is to safely inspect high-quality pharmaceutical products in accordance with site standards and current Good Manufacturing Practices (cGMP) within controlled facilities. This position requires operation of various automated and semi-automated manufacturing equipment, as well as performance of manual inspections. The operator is responsible for ensuring product quality while demonstrating a strong commitment to safety, compliance, and operational excellence. Responsibilities: • Adhere to Parenteral Manufacturing safety policies and procedures and contribute to a safe work environment. • Set up and operate non-aseptic manufacturing processes, including automated and semi-automated inspection equipment in controlled facilities. • Follow standard operating procedures (SOPs), cGMP requirements, and safety policies and procedures. • Accurately document process steps using appropriate batch documentation systems (paper and electronic). • Participate in department meetings, team-building activities, and training programs. • Provide input into department SOPs and training materials as needed. • Maintain accountability for working safely and supporting all site and corporate health and safety goals. Basic Requirements: • Minimum education: High School Diploma or GED • Must pass a post-offer physical examination • Must pass an eye exam and not be color blind • Ability to wear required safety equipment (safety glasses, safety shoes, protective gloves, etc.) • Ability to work within a shift-based schedule • Willingness to work overtime, weekends, and off-shifts as required Additional Skills / Preferences: • Experience working in a GMP-regulated environment • Ability to troubleshoot basic production issues and effectively use tools • Experience with PMX, MasterControl, Flow-stream, or other electronic batch documentation systems • Previous pharmaceutical manufacturing experience • Experience with manual, automated, and semi-automated inspection processes • Strong attention to detail when performing manufacturing tasks and documenting production activities on paper and computer-based systems • Basic math skills, including evaluation and interpretation of production data • Basic computer skills, including use of HMIs and other computer terminals to monitor equipment status and document production activities • Excellent documentation skills • Proven teamwork skills and ability to work closely with operations teams during line setup, operation, and changeovers Additional Information: • Ability to work overtime as required • Ability to wear required safety equipment (glasses, shoes, gloves, etc.) • Primary work location: Kenosha County, Wisconsin • Ability to travel up to approximately 10% This is intended to provide a general overview of the job requirements at the time it was prepared. Job responsibilities may change over time and may include additional duties not specifically described. For GMP purposes, the job description should be updated for significant changes. Employees should consult their supervisor regarding actual job responsibilities and related duties.

Under the direction of the Quality Lab Supervisor, with guidance from the Quality Lab Tech Lead, the Quality Assurance Lab Technician is responsible for the completion of testing and inspection, dimensional analysis and support of other departments within HellermannTyton. This position requires the Technician be able to complete product/process inspections in a product enviornment as well as a lab environment while managing files and software. Overtime will be required including some weekend hours. This position will also maintain HellermannTyton's TS16949/ISO14001/EMS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Understand Customer Expectations as they relate to Product Quality Thrive in and help support a Team Atmosphere Help support the HellermannTyton Team by mentoring Operators regarding Quality of Product Perform 1st Piece Inspection of manufactured product Perform in-process inspection of manufactured product Perform Product specific tests including but not limited to tensile Perform moisture analysis on manufacutured product as well as incoming Verify Material Certification and Approve raw material Enter and edit SPC data in the SPC computer file File all QA records and samples (obsolete and current). Use incoming color chip samples to verify colorant in receiving Handle non-conforming material isolation and documentation Perform a dimensional layout referencing the HellermannTyton drawing Use SPC software Record all inspection and test data. Weigh parts. Use control plans. PPAP and PPC testing. Assist in maintaining HellermannTyton's Quality and Environmental certification by supporting: Corporate policies, procedures, work instructions and required documentation. Other Functions Become a "Go To" person for production personnel regarding Quality of Product Determine "Clean Point" when a non conformance is found Support LEAN Work Environment Other duties may be assigned. Key Competencies Ability to read Blue Prints Ability to use basic hand meausring tools Have basic math skills Ability to comminicate effectively both written and orally Basic computer skills a plus Injection Molding knowledge a plus Qualifications (skills, knowledge, experience) High school diploma or equivalent required. 1 year prior lab experience preferred Good math and communication skills. Computer skills - Windows, Excel Good vision. Mic and caliper knowledge preferred. Problem solving skills. Blue print reading skills preferred. Excellent verbal & written communication skills. Bend over in order to lift 50lbs. Ability to lift/push/pull up to 50 lbs. All employees entering the Manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) for their position. Wearing your Personal Protective Equipment (PPE) is a condition of employment. Ability to work daily and weekend overtime to meet the needs of the department and customer. #LI-Onsite #LI-KN1 Rev. 5.18.2023 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

**Posting Title:** Quality Technician **Reports To:** Quality Manager **Salary Range:** $28.00/hour to $32.00/hour Final determination of a successful candidate's starting pay will vary based on a number of factors, including market location and may vary depending on job-related knowledge, skills, education and experience. The pay scale listed for this position is generally for candidates that meet the specified qualifications and requirements listed on this specific job description. We provide a competitive compensation package that recognizes your experience, credentials, and education alongside a robust benefits program to meet your needs. Our compensation reflects the cost of labor across several US geographic markets. **WHO WE ARE** For more than 70 years, Cupertino Electric, Inc. (CEI) has been powered by people who've built a reputation for delivering high-profile, complex projects. Real, tangible things that alter the landscape and improve lives. But even more than that, we've built a reputation for integrity. We're problem solvers and innovation seekers. We're team players and safety fanatics. And we always-always-do the right thing. Even when no one is looking. Because what we do here is important, but how we do it is everything. **THE MODULAR TEAM** Modular solutions by CEI anticipate and solve ongoing problems for data center operators. Our proven, factory-built and tested data center infrastructure products bring deployments online faster, more reliably, and with less risk than conventional methods. **ABOUT THE ROLE** Working in line with Cupertino's core values, the person in this role will work closely with manufacturing on first piece, in-process, and final inspection. Will monitor supply base and in-house processes for product conformance. Will issue, track, and verify corrective actions requested from internal or customer, and issued to our supply base. The role involves developing an Equipment Log using various forms, one-lines, drawings, BOMs, etc., and identifying OFCI (Owner Furnished Contractor Installed) equipment to ensure its proper documentation. Responsibilities include tracking the receipt of proper OFCI, maintaining a tracking document, and coordinating with Materials, Quality, Production, and Project Management groups upon receipt. You will act as a liaison to the project management group to ensure clients are informed about what has and hasn't been received, prepare receiving reports, and coordinate with the NETA testing group to prioritize their testing sequence. Additionally, the position involves completing clients' prescribed notification systems such as Procore, ACC, BIM, etc., tracking equipment through the assembly process to ensure proper usage, and ensuring that equipment will work in the process as designed (e.g., stub-ups, openings). A key expectation is to be a team player and professionally vocal as issues arise. **Knowledge:** Developing professional expertise, applies company policies and procedures to resolve a variety of issues. **Job Complexity:** Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors. Exercises judgment within defined procedures and practices to determine appropriate action. Builds productive internal/external working relationships. **Supervision:** Normally receives general instructions on routine work, detailed instructions on new projects or assignments. **ABOUT YOU** + Proficient in reading drawings, blueprints, one-lines to identify equipment as called out on these documents + Journeyman level electrical knowledge or experience + Proficient in Microsoft Office + Must be able to pass PIT licensing test **MINIMUM QUALIFICATIONS** _Any combination of education and experience that would likely provide the required knowledge, skills and abilities as well as possession of any required licenses or certifications is qualifying._ **Education:** High School Diploma or GED required. **Experience:** 3+ years' experience in manufacturing or construction. Minimum 3 yrs. in a quality role **WORK ENVIRONMENT** + Mostly in assembly plant however, traveling to vendors which may be loud and/or dirty, is possible + May be required to sit/stand at desk/computer, and/or walk the production floor for extended time + May be required to work on job site in all kind of weather + Hard Hat, Gloves, Safety Glasses and appropriate foot ware (supplier or job site-Safety toe) **PHYSICAL DEMANDS** + Sitting/standing/working for extended times + Lifting 25lbs not uncommon *Applicants must be authorized to work in the United States. This position is not eligible for sponsorship. \#LI-DR1 **PLEASE NOTE:** CEI will never ask for any money or financial information from applicants during the hiring process. To learn more about "job scams" how to avoid them, click here. (******************************************** CEI is a place where every single person can-and does-have an impact on the work we do and the communities we serve. Here, you can build your own story and grow to your full potential. You can collaborate and celebrate with amazing people. And you'll go home every day knowing you helped contribute to important work that shapes people's lives. Our commercial, data center and energy projects may be complex, but our approach is simple. We build great things and we do it with great people. The job duties listed are typical examples of work performed by positions in this job classification and are not designed to contain or be interpreted as a comprehensive inventory of all duties, tasks, and responsibilities. Specific duties and responsibilities may vary depending on department, program or project needs without changing the general nature and scope of the job or level of responsibility. Employees may also perform other duties as assigned. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Cupertino Electric Inc. aims to make cei.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact us at *************** or 1-(877)-747-4CEI. Cupertino Electric, Inc. (CEI) is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.

Temp Key Responsibilities: Inspection of incoming and outgoing products and materials to engineering and specifications using basic test and measuring equipment. Ability to work with handheld gauges, such as calipers, micrometers, height gauges, and pin gauges. Ability to work with an optical comparator. Able to read and interpret blueprints. Knowledge of GD&T is a plus. Experience with engineering drawings and tolerances, standards, and specifications. Upload your resume or send it to ***************** Benefits Offered: 401(K) 401(K) matching Dental, Vision, Life, and Health insurance (after 60 days) Paid Time Off/ IL Plawa Qualifications: 1- 2 Years of experience performing close/tight-tolerance mechanical inspections required.

The Quality Technician ensures that products and processes meet established quality standards by conducting inspections, tests, and audits. This role involves collaborating with production, engineering, customer service, and sales teams in identifying quality issues, and assisting with implementing corrective actions to maintain compliance with company and regulatory requirements. This individual will report to the Quality Supervisor and be a strong partner to our operators and supervisors on the floor. This person will have to captivate and communicate with all departments to address issues, propose resolutions, and see through the quality vision for the company. They will also maintain proper reporting, documentation, and any other necessary routines for the department. Essential Duties and Responsibilities This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Read and interpret blueprints, engineering drawings, and technical specifications to verify that products meet required standards. Use standard measurement tools and equipment (e.g., calipers, tape measures, micrometers, gauges) to check and document product dimensions. Perform visual and dimensional inspections on incoming materials, in-process production, and finished goods. Record inspection results accurately and communicate nonconformances to appropriate personnel. Support Shipping & Receiving by inspecting incoming and outgoing products when required. Maintain and organize quality logs, including Nonconforming Material (NCM) records, Returned Material Authorization (RMA) records, and scrap tracking logs. Assist in monitoring scrap trends and providing relevant inspection data to production. Track and maintain the calibration status of measuring tools and equipment. Participate in internal audits to verify compliance with established procedures, quality standards, and customer requirements. Assist with quality documentation activities such as PPAPs or first article inspections, when needed. Support training efforts by helping production employees understand quality standards and proper inspection methods. Participate in problem-solving activities to help identify root causes of quality issues and support corrective actions. Work independently to perform inspections, maintain logs, and resolve routine quality issues with limited on-site supervision. Communicate end-of-shift updates, nonconformances, and outstanding issues to the incoming shift and QC leadership. Coordinate with operators and supervisors to ensure quality standards are maintained throughout the shift. Provide flexible inspection support across multiple production departments as required. Maintain knowledge of quality standards and best practices through training and professional development. Perform other quality-related duties as assigned. Work in accordance with company policies, mission, and values at all times. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Strong attention to detail and commitment to customer experience. Possesses ability to use gauges such as calipers and micrometers to measure products. Able to read and understand Engineering drawings and blueprints. Effective communicator to various audiences using verbal and written skills. Education and/or Experience High school diploma or equivalent required. Associates or Bachelor's Degree or equivalent experience is a plus. 3 or more years working in a manufacturing operations environment. 1 or more years' experience working with quality assurance/control is preferred. Experience with Microsoft Office software such as Windows, Word, Excel, PowerPoint, Teams, Outlook. Experience with Global Shop Solutions ERP system is a plus. Schedule2nd shift: Monday - Thursday 2:45pm-12:45amBenefits Medical (Anthem) Dental (Anthem) Vision (Anthem) Life Insurance Supplemental Insurance 401k with matching Paid Holidays Paid Time Off Paid Parental Leave Incentive Plan Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Frequent: Seeing Hearing Standing, walking or mobility for long periods of time Lifting, pulling, or pushing up to 50 pounds without assistance Climbing, stooping, or kneeling Fingering, grasping, feeling, typing Activities are performed on a routine basis using personal protective equipment (PPE) such as glasses, shoes, and earplugs. At times, face shields, aprons, suits, and other PPE may be required. Employee will operate various hand tools, power hand tools and machine tools. Note: The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. It should not be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Work Environment Normal office and factory environment. Slight exposure to dust, noise, fumes, and oils is present. We are great people that make a great product! At Tanis Brush, we design and manufacture various industrial and utility brushes that help other businesses thrive. Our brushes are used for cleaning, sorting, painting, finishing and protecting equipment, machinery, parts and many other applications. Since 1987, Tanis has been known for our vast selection of brush products, resourceful specialty design, engineering capabilities, and exceptional customer service. Tanis Brush provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, ancestry, national origin, citizenship, sex or gender (including pregnancy, childbirth, and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, religion, age, disability, genetic information, service in the military, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.

7am to 7pm or 7pm-7am under a 2-2-3 rotation, working 3 days one week (36 hours) and 4 days the next (48 hours) Pay: $17 - $23/hour based on experience As a Quality Inspector, you are responsible for conducting in-process inspections on manufactured product and documenting the results according to Quality, Regulatory, and Customer requirements. The role of Quality Inspector will work closely with the Operations team and Quality Engineers daily to provide feedback regarding the part quality. Job Duties: Follow Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP). Knowledgeable in inspection criteria (Visual Inspection Criteria (VIC), Quality Alerts, Inspection Reports (IR).) Read and understand customer drawings and specifications. Collect and perform thorough inspections of molded and assembled components to ensure they meet specified quality standards, regulations, and safety requirements including: Visual Inspections Measurements Functional Test Methods Identify and document defects, discrepancies, or non-conformances in products or processes. Determine whether defects are within acceptable tolerances or require corrective actions. Record inspection results, measurements, and other relevant data accurately and in accordance with established procedures. Maintain detailed records of inspections, defects, and corrective actions taken to correct the issue. Operate various testing and measurement equipment such as coordinate measuring machines, vision systems, moisture, and force testing to accurately assess product dimensions and characteristics. Communicate with production supervision to align with daily production schedule. Collaborate with production team, engineers, and other stakeholders to communicate quality issues, recommend corrective actions, and ensure the products meet quality expectations. Collaborate with Quality Engineers for Root Cause Analysis investigations for defects or quality issues, aiming to identifying underlying problems and contributing factors to aid in prevention of future re-occurrences. Audit in-process records assuring process is in defined limits. Initiate non-conformance alerts and notify Quality Technician and/or Management Requirements: High School Diploma or equivalent is required One year of experience and/or training, or equivalent combination of education and experience. Experience with basic Quality Instruments such as; calipers, micrometers, height gauge, gage pins, and go/no-go gages. Must be able to read basic prints. Working knowledge of Coordinate Measuring Machine, OGP Vision System, Instron, Keyence, and manual gages, is a plus. Experience in working with a team

Busy company is looking for an energetic candidate to manage perform final inspection of product and package it for shipping. This is a fast paced position, and candidates must be able to lift and move large rolls of material. Verify that parts meet specifications on the blueprint Measure parts as final check before shipment Bag large rolls of material Box product Kit package parts RequirementsREQUIREMENTS OF THE PACKAGING / INSPECTION POSITION: Ability to lift 70 pounds Read basic blueprints Measure product with ruler, micrometers, and calipers BenefitsHealth Dental PTO Holiday

The quality assurance inspector assures the consistent quality of production by developing and enforcing manufacturing practices and systems, validating processes, and providing necessary documentation to ensure quality excellence. In this role the inspector will strive to achieve Quality Assurance operational objectives by contributing information and analysis to strategic plans and reviews, preparing and completing action plans, implementing production, productivity, quality, and customer-service standards, identifying and resolving problems, completing audits, determining system improvements as well as implementing change. Essential Duties & Responsibilities The Quality Inspector will perform the described quality activities throughout the manufacturing plant as necessary and on a daily basis. Essential Duties and Responsibilities include the following: Inspection of incoming and outgoing products and materials to engineering specifications using basic test and measuring equipment. Perform visual and dimensional inspection of purchased parts, tight tolerance machined and manufactured parts, components, assemblies and materials using calibrated standards and equipment. Perform first article inspection on new and revised components. Generate, distribute and file inspection reports as required. Initiate, track, and close nonconformance reports and corrective actions. Document non-conforming product when detected. Learn & work in critical modules in QMS database UniPoint. Complete and maintain all documentation per customer and/or internal requirements. Ability to work with hand held gauges, such as calipers, micrometers, height gauges, pin gauges, etc. CMM operating Qualifications Required Knowledge: 2+ Years of experience performing close tolerance mechanical inspections Experience with Metal Stamping and/or Fabrication (Laser Cutting, Forming, Welding and Assembly Processes) Knowledge of ISO 9001 (*Knowledge of TS16949 a plus) Strong Math Skills Ability to read blueprints Strong Computer Literacy (Word, Excel, Power Point, and Outlook) CMM experience is plus

About AkzoNobel Since 1792, we've been supplying the innovative paints and coatings that help to color people's lives and protect what matters most. Our world class portfolio of brands - including Dulux, International, Sikkens and Interpon - is trusted by customers around the globe. We're active in more than 150 countries and use our expertise to sustain and enhance the fabric of everyday life. Because we believe every surface is an opportunity. It's what you'd expect from a pioneering and long-established paints company that's dedicated to providing sustainable solutions and preserving the best of what we have today - while creating an even better tomorrow. Let's paint the future together. For more information please visit ***************** 2024 Akzo Nobel N.V. All rights reserved. Job Purpose What is the primary purpose of this job? Describe in a paragraph of 5-6 lines why the job exists, main objectives and the need it fulfills. This position is responsible for analyzing and testing manufactured products and raw materials. Uses approved test methods and procedures to assure that products meet customer specifications prior to releasing to the Filling department. Consults with QC, Production, and RDI personnel on quality related problems. Evaluates test results and assists in the correction of Production and Filling related problems. This position in for 3rd shift Key Responsibilities * Describe the essential responsibilities of the job. Start each line with an action verb that best describes the responsibility. List the responsibilities by priority. Group per area. Include the outcome of the responsibility. Conducts tests including but not limited to viscosity, gloss, hardness, weight per gallon, non-volatile content, cleanliness, adhesion, and paint film properties. * Tests raw materials. * Writes up adjustments to batches that are outside of specification within approved ranges and guidelines. * Consults with QC and Production leadership, and RDI personnel to resolve batch performance issues. * Prepares pre-shipment samples for customer submission. * Participates in 5S and general housekeeping activities in the laboratory. Job Requirements Minimum Qualifications: High School diploma Good basic math and computer skills in MS Office applications Required to walk or stand majority of the shift. Ability to lift 50 lbs. Capable of wearing breathing apparatus and capable of passing a fit test. Preferred Qualifications: Two years of college Two years laboratory experience. Compensation & Benefits Compensation for this role $28.00/hour with a $1.50 shift differential for hours worked on 3rd shift 401K retirement savings with 6% company match Medical insurance with HSA Dental, Vision, Life, AD&D benefits Generous vacation, sick and holiday pay Progression (pay-for-skill) pay plans Short & Long term disability Paid Parental leave after 1 year Career growth opportunities Active Diversity & Inclusion Networks Employee referral bonus Employee appreciation days Competencies Accepting Direction Accepting Responsibility Acquiring Information At AkzoNobel we are highly committed to ensuring an inclusive and respectful workplace where all employees can be their best self. We strive to embrace diversity in a context of tolerance. Our talent acquisition process plays an integral part in this journey, as setting the foundations for a diverse environment. For this reason we train and educate on the implications of our Unconscious Bias in order for our TA and hiring managers to be mindful of them and take corrective actions when applicable. In our organization, all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age or disability. Requisition ID: 51147 #LI-CH3

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter This is where your creativity addresses challenges You are creative, thorough, and a heads-down do-er. You embrace a challenge and truly apply the collaborative powers of your team to produce great results. You are motivated by work that is never the same from one day to the next. As a Quality Technician, you are unafraid of navigating through necessary internal processes to facilitate a product you deeply believe in. You can absorb and act on complex procedures and data and train your team or peers if needed. You take pride in getting things done quickly without sacrificing safety or quality. Your Team at Baxter Within Quality, every role makes a difference. Products that Baxter makes are shipped worldwide for patients in need. Whether it's building a new process from scratch or facing a never-before-seen production hurdle, individuals within Quality are given the trust and opportunity to bring creativity to the table. Regardless of your specific role with a product, it is sure to touch a portion of our global operation. The mission of Baxter is to save and sustain lives. This mission is embedded into everything we do. This means if there is a decision to be made where quantity and quality are at odds, we will always choose quality. Our patients come first, always. The Quality function values both working together as a team and independently. We draw energy from working in a plant or an office where there are opportunities to collaborate. As the company evolves, so does the way our team approaches work as it strives to create top-of-the-line products. We build relationships with each other to get work done. Building these relationships is easy because we all share common traits of being reliable, ethical, and caring. We lean on our colleagues for their expertise and hold each other accountable. We feel empowered to speak up when there's a new insight or opportunity to improve something. This open dialog builds trust within the team and helps create a better product for our customers. You will be responsible for supporting various assignments supporting Baxter quality systems and ensuring label copy control, sample management, documentation review, Oversight floor shop activities, and other quality department functions. **This is a 2/2/3 day shift position, will work 12-hour shift from 6:00 am - 6:30 pm** What you'll be doing: Makes detailed observations, analyzes data, and interprets results. Maintains department equipment and inventory levels for controlled materials. Owns monthly inventory cycle count initiation and variance follow-up. Perform routine inspections as the provider of floor shop oversight, quality checks, and in-process product inspections of finishing product areas. Interacts with manufacturing and supervision to address quality process or batch-related concerns. Performs process compliance audits of all manufacturing areas to ensure quality of product/process (TIQs) is achieved. Performs troubleshooting, works independently, and makes decisions based on general guidance and existing procedural requirements. Performs product functional testing in support of equipment validations. Identifies process improvements and escalates to Line Operations Supervision and/or Management. Ability to work independently and as part of a team in a fast-paced environment. What you'll bring: The candidate must not be allergic to penicillin or cephalosporin drugs 6 months of experience in manufacturing/quality preferred. HS Diploma or equivalent is required. Basic science, math, and computer skills (including Microsoft Word and Excel) are required. Good writing, verbal communication, and problem-solving skills are required. Ability to work in a team environment and make independent decisions based on procedural and regulatory requirements It is desirable for the candidate to have experience with the requirements of current Good Manufacturing & Documentation Practices in pharma manufacturing facilities. The candidate must be able to work flexible hours in a dynamic environment with minimal direct supervision. Will work in both Drug Delivery and Penicillin facilities as needed. Overtime may be required to meet the production schedule. Must be able to work every other weekend. Visual Acuity 20/20 Near Vision with or without corrective vision required We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $40,000 to $55,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success -- so we give you unlimited access to everything you need to provide technical solutions on our Manufacturing Quality Team. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to support the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Year after year, our team continues to make significant breakthroughs in the industry. We're just getting started. To learn more about our story click HERE. Your Role on Our Team The Quality Technician II will be responsible for ensuring the quality of all products produced meet agreed upon standards and expectations. The Quality Technician II will demonstrate the ability to put people and process first at all times to ensure Milwaukee Tool's unwavering devotion to a robust quality culture. This position is the standard bearer for who we are and the obsession we have with being the market leader. A Quality Technician II is charged with overseeing the quality, safety, productivity, and training linked within their assigned team. The ability to effectively communicate to the team is crucial to the continued success and development of the personnel and equipment managed. Through resourcing of timely product inspections, and directing of plant quality technicians, the Quality Technician II position is tasked with the short- and long-term success of the Manufacturing Quality Team. Shift: 3rd Shift, Sunday-Thursday 11:00pm-7:00am You'll be DISRUPTIVE through these duties and responsibilities: Key contributor of the manufacturing quality assurance organization by performing daily audits of the manufacturing process to ensure all products and processes are abiding by the specifications and standards set by the leadership teams User of test lab equipment such as tensile/torsion testers, hardness testers, metallurgical equipment (cut/mount/polish, optical and stereo microscopes), and other various test equipment Operate CMM and VMM measuring machines and user of handheld devices such as calipers, micrometers, height/snap/pin gauges and other various devices to support metrology needs Initiate Quality System documentation, such as Inspections, Non-Conforming Material Reports (NCMR's), quality alerts Contribute to the creation of work instructions Complete dimensional inspections of incoming raw material Ability to navigate document repository web page to locate inspection reports, blueprints and other quality documents Participate in gage R&R studies as needed Mentor Quality Technician I personnel and provide guidance to manufacturing operators Effectively communicate across shifts and weekend work within internal teams and cross-functional teams Support Operator instruction/ training on new procedures or techniques Perform basic math; fraction to decimal conversion, arithmetic and units of measure conversion, and basic statistics Consciously abide by all safety policies and procedures to create a safe working environment Other duties as assigned The TOOLS you'll bring with you: High School or GED diploma 2+ years of previous quality experience or 5+ years of manufacturing experience Basic understanding of Microsoft Office Suite, Excel and Microsoft Outlook Excellent oral and written communication skills Ability to navigate technology such as computer, tablet and printer systems Ability to work independently and as part of a team Ability to read blueprints Problem solving abilities, interpersonal skills, and the ability to manage interruptions Proven hands-on skills and ability to follow detailed instructions is a huge plus Other TOOLS we prefer you to have: Understanding of metrology fundamentals, GD&T We provide these great perks and benefits: Robust health, dental and vision insurance plans Generous 401 (K) savings plan Education assistance On-site food and coffee service And many more, check out our benefits site HERE Milwaukee Tool is an equal opportunity employer.

Job Description Quality Inspector 💲 Pay: $18 - $25/hour (based on experience) ✨ Full Benefits Package after 60 days 🔎 Ludlow uses E-Verify to confirm work eligibility in the U.S. Do you take pride in details and have a passion for quality? Do you have experience in a manufacturing, (sheet metal, welding) environment? Join our team as a Quality Inspector and play a key role in ensuring our products meet the highest standards. This role is perfect for someone who enjoys hands-on work, problem-solving, and making a real impact in a fast-paced manufacturing environment. What You'll Do Inspect materials, in-process, and finished products Use precision tools (calipers, micrometers, gauges, etc.) Document results and maintain quality records Support continuous improvement and ISO 9000 standards Inspect parts and assemblies to ensure they meet blueprint and customer specifications What We're Looking For Required Skills & Experience 3-5 years of experience in a quality inspection role within manufacturing (sheet metal, welding, or related environment) Strong ability to read and interpret blueprints, drawings, and manufacturing prints Proficient in using measuring tools (calipers, micrometers, height gauges, etc.) Familiarity with ISO 9000 standards and Statistical Process Control (2-3 years) High school diploma or equivalent Proficiency in Microsoft Office (Outlook, Word, Excel, PowerPoint) Excellent communication, problem-solving skills, and knowledge of manufacturing processes Hands-on metal fabrication experience Preferred Skills (a big plus!) Certified AS9100 Internal Quality Auditor Six Sigma Green Belt or Black Belt CMM experience Bilingual (Spanish) Why You'll Love Working Here We believe in taking care of our team. Our comprehensive benefits package includes: Medical, dental, and vision insurance IRA with company match Life insurance, short- and long-term disability Legal, identity theft, and wellness programs Critical illness, hospital indemnity & accident insurance Paid time off, holiday pay, and floating holidays This is more than just a job-it's an opportunity to grow your skills, be part of a supportive team, and make a difference every day. 👉 Apply today and bring your expertise in quality to a company that values precision, integrity, and innovation. Powered by JazzHR Cc1HG7eBPf

Temp To Full-Time Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality, and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner.

Job Description SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS Powered by JazzHR jgvb QKIpWa

Parallel Employment Group, in partnership with a Fort Atkinson manufacturing company, is seeking a qualified Quality Assurance Tech to join the team. $17-$19 per hour; based on experience 2nd shift Role, training on 1st shift. The Quality Inspector is responsible for ensuring that all products meet required customer specifications, and quality standards. This position performs inspections on first pieces, in-process, and final materials to verify accuracy and prevent the release of defective products. Essential Job Functions and Performance Standards for Quality Inspector Technician Verify documentation and certification requirements for products received from suppliers, and notify the appropriate individuals of any discrepancies or deviations from drawings or purchase order requirements. Perform first-run inspections from manufacturing to ensure all quality specifications are met and accurate before completing the run. Compare results of inspections and tests to the company's quality standards. Follow all safety protocols by using proper PPE and maintaining housekeeping standards. Perform assigned routine visual inspections and other specified tests. Work Environment Quality Inspector Technician may be required to stand, sit, or squat for extended periods of time. The role involves lifting up to 50lbs at a time, and good hand dexterity is essential. Requirements Experience For Quality Inspector Technician Experience using hand-held and various measuring devices for product inspection. Other Ability to work independently with minimal supervision. Lift up to 50 lbs and stand 8-10 hours per day #ind456

Acute Care TechnologyAt ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $20.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Quality Control Inspector - 1st Shift, 7am-3:30pmPay: $20-$24/hour (Based on Experience) At our client, they don't just build components-they ensure quality at every step. As a Quality Control Inspector, you'll play a critical role in maintaining the excellence our customers depend on. If you're detail-driven, reliable, and ready to grow within a fast-paced manufacturing environment, this is your opportunity to make an impact. We are seeking a meticulous and motivated Quality Control Inspector for our 1st shift team. You will be responsible for performing Incoming, In-Process, and Final Inspections, using traditional metrology tools to ensure components meet required specifications and quality standards. Essential Duties and Responsibilities: Inspect alignment and dimensions of parts using ID/OD micrometers, height stands, and calipers Perform manual drafting to document dimensional requirements Verify parts against product specifications, drawings, and part lists Visually examine parts and document production results Ensure all inspections and records comply with the Quality Management System and Customer Requirements Confirm assembly completeness and identify missing or incorrect hardware Participate in ongoing training and maintain equipment certifications Required Competencies & Skills: Proficient with manual inspection tools (Micrometers, Calipers, Height Stands) Ability to read and interpret manufacturing drawings and blueprints Strong verbal and written communication skills Solid mathematical knowledge including geometry, trigonometry, fractions, decimals, and layout functions Excellent critical thinking, problem-solving, and time management abilities Adaptable and able to work both independently and as part of a team Preferred Qualifications: Valid driver's license Prior experience in a manufacturing or quality control environment Exceptional attendance record (required) Completion of Overhead Crane and Forklift Training (training provided upon hire if needed) Physical Requirements: Frequent standing, walking, climbing, stooping, kneeling, bending, and lifting (up to 50 lbs) Frequent use of hands, tools, and inspection equipment Occasional talking or hearing in a production setting

Quality Inspector 2nd shift 🕒 Monday-Thursday | 3:30 PM - 2:00 AM (3-day weekends!) 💲 Pay: $18 - $25/hour (based on experience) ✨ Full Benefits Package after 60 days 🔎 Ludlow uses E-Verify to confirm work eligibility in the U.S. Do you take pride in details and have a passion for quality? Do you have experience in a manufacturing, (sheet metal, welding) environment? Join our team as a Quality Inspector and play a key role in ensuring our products meet the highest standards. This role is perfect for someone who enjoys hands-on work, problem-solving, and making a real impact in a fast-paced manufacturing environment. What You'll Do Inspect materials, in-process, and finished products Use precision tools (calipers, micrometers, gauges, etc.) Document results and maintain quality records Support continuous improvement and ISO 9000 standards Inspect parts and assemblies to ensure they meet blueprint and customer specifications What We're Looking For Required Skills & Experience 3-5 years of experience in a quality inspection role within manufacturing (sheet metal, welding, or related environment) Strong ability to read and interpret blueprints, drawings, and manufacturing prints Proficient in using measuring tools (calipers, micrometers, height gauges, etc.) Familiarity with ISO 9000 standards and Statistical Process Control (2-3 years) High school diploma or equivalent Proficiency in Microsoft Office (Outlook, Word, Excel, PowerPoint) Excellent communication, problem-solving skills, and knowledge of manufacturing processes Hands-on metal fabrication experience Preferred Skills (a big plus!) Certified AS9100 Internal Quality Auditor Six Sigma Green Belt or Black Belt CMM experience Bilingual (Spanish) Why You'll Love Working Here We believe in taking care of our team. Our comprehensive benefits package includes: Medical, dental, and vision insurance IRA with company match Life insurance, short- and long-term disability Legal, identity theft, and wellness programs Critical illness, hospital indemnity & accident insurance Paid time off, holiday pay, and floating holidays This is more than just a job-it's an opportunity to grow your skills, be part of a supportive team, and make a difference every day. 👉 Apply today and bring your expertise in quality to a company that values precision, integrity, and innovation.

SMS Staffing is Hiring - Quality Control Inspectors! Job Title: Quality Control Inspector Job Type: Temp to Hire Pay: Starting at $18/Hr.+ (based on experience) Shift: 2nd Shift | 4:00 PM - 12:30 AM (Monday - Friday) Job Summary We're looking for detail-oriented inspectors to help maintain product quality. As a Quality Control Inspector, you'll check components, in-process materials, and finished goods, keep accurate inspection records, submit samples to the lab, and report defects. You'll also have the authority to place materials on hold or halt production if needed. Key Responsibilities Inspect materials and products against standards Record inspection and test data Submit samples to the lab Report defects to Production, Shipping, and Quality management Place materials on hold or release as appropriate Halt production or shipment if safety or quality issues arise Maintain a clean and safe work area Follow all safety and food safety policies Requirements High school diploma required; training in industrial quality practices preferred Basic math skills Ability to read and follow job orders and specifications Strong attention to detail Ability to work independently Experience with inspection tools like calipers preferred Physical Demands Frequent standing, walking, bending, kneeling, crouching, and reaching Lift/move items 10-50 lbs regularly Visual acuity for close, distance, color, and depth perception Join the SMS team! It takes more than top-notch facilities, modern equipment, and innovative technologies to become our customers' most trusted supplier. It takes people who are committed to our customers' success and who are willing to go the extra mile to get the job done right. #SMS