Quality inspector jobs in Parsippany-Troy Hills, NJ - 225 jobs
All
Quality Inspector
Quality Control Inspector
Quality Assurance Technician
Lead Inspector
QA Radiology Technician
NYC Health + Hospitals/Correctional Health Services 4.7
Quality inspector job in New York, NY
NYC Health + Hospitals is the largest public health care system in the nation. We are a network of 11 hospitals, trauma centers, neighborhood health centers, nursing homes, post-acute care centers, and correctional health services. We are a home care agency and a health plan, MetroPlus. Our health system provides essential services to 1.4 million New Yorkers every year in more than 70 locations across the city's five boroughs. Our diverse workforce of more than 42,000 employees are uniquely focused on empowering New Yorkers.
NYC Health + Hospitals/Correctional Health Services is one of the nation's leading correctional health care systems in quality of and innovations to care, and access from pre-arraignment through compassionate release. In-jail services include medical, nursing, mental health, substance use treatment, social work, dental and vision care, discharge planning, and reentry support. In addition to providing direct patient care in the jails, CHS leverages the resources of the nation's largest municipal health care system to help discharged patients successfully return to their communities. CHS is also a pivotal partner in New York City's criminal justice reform efforts.
The Quality Assurance (QA) Radiological Technologist position encompasses responsible, administrative and clinical activity of varying degrees of latitude. Clinical level judgement is needed in the daily supervision of radiological functions and patient care, and departmental projects.
Responsibilities include:
Review exam orders, consult with radiologist, schedule patients and arrange for transportation as indicated.
Identify patient and document all information pertinent to final report in the RIS and on images (PACS).
Prepare all patients (infants, children, adolescents, adults and geriatric) for radiological procedures requested by the clinician. Arrange for proper protection of patients, public and staff from infectious diseases/materials.
Perform all general diagnostic imaging and routine examination in CT and Angiography.
Assists in performing daily checks of radiographic imaging equipment, immobilization devices and other necessary accessories.
Enters data and maintains documents and logs as required and mandated by the department QA guidelines and various regulatory agencies.
Maintains adequate stocks of supplies and materials needed for use in the department.
Checks equipment for defects prior for use and assures proper use of such equipment through instruction and review.
Report any unexpected patient incidents in accordance with the occurrence report protocol.
Maintain and exercise all mandated radiation safety regulations. Maintain basic care of all the imaging equipment. All malfunctions are to be reported to management staff whether mechanical, electrical or suspect and service request documentation completed. Maintain a clean and safe work environment for both patients and staff.
Perform other duties as deemed necessary (by supervisory or administrative staff) in the event of emergencies or disasters.
Continue professional growth and development of job-related skills on an ongoing basis. Participate in continuing education activities.
Ensure all examinations are accessioned, documented and sent to PACS for reading. Monitor PACS and RIS incomplete worklists to ensure all exams are completed.
In accordance with HIPAA (the Health Insurance Portability and Accountability Act), staff members will exercise due diligence in ensuring patient privacy and confidentiality.
Identifies activities that the network has implemented to promote patient safety and takes all necessary precautions to ensure a safe environment for patients, visitors and staff.
In addition to the Radiology Technologist job functions, the QA Technologists is responsible for the following:
Organize and file maintenance reports for each building in regards to dentistry and radiology x-ray equipment and ensure dentistry and x-ray equipment follow the Department of Health codes, policies and procedures.
Participates in quality assurance activities, including coordination, control and maintenance of technical equipment.
Establish a daily/weekly/monthly quality control routine for monitoring, evaluating, and maintenance of X-ray equipment to ensure optimal performance and stability.
Documenting and maintaining records for the quality control program in accordance with applicable regulations, legal requirements, accrediting agencies and recommendations from equipment manufacturers.
Performs research and participates in special projects involving evaluation of equipment and delivery of service.
Work with our radiologists to obtain updated documentation of primary diagnostic monitors.
Distribute/collect dosimeter badges from each employee/facility that works with x-ray equipment.
Recommends area assignment of personnel to coordinate activities within the department with other activities and services and represents the department in interdepartmental operations and meetings.
May be assigned duties and responsibilities of X-ray Director in regards to radiology department workflow.
Minimum Qualifications:
Assignment Level III
1. For Supervisory Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and two (2) years of Radiologic Technologist experience performing duties consistent with Assignment Levels I and II, one (1) year of which must have been in a supervisory capacity.
2. For Specialized Imaging Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and possession of a current advanced- level certification for the performance of these procedures.
NYC Health and Hospitals offers a competitive benefits package that includes:
Comprehensive Health Benefits for employees hired to work 20+ hrs. per week
Retirement Savings and Pension Plans
Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts
Loan Forgiveness Programs for eligible employees
College tuition discounts and professional development opportunities
College Savings Program
Union Benefits for eligible titles
Multiple employee discounts programs
Commuter Benefits Programs
$36k-57k yearly est. 5d ago
Looking for a job?
Let Zippia find it for you.
Quality Inspector Brooklyn
Top Prospect Group LLC
Quality inspector job in New York, NY
Job Title: Quality Control InspectorDETAILS:
Duration: 6 months Contract temp to Permanent
Salary: $26 - $33/hr depending on experience
Benefits: Option benefits cafeteria style until permanent
Shift: 1st Shift 7am -4pm.
We are currently seeking a Quality Control Inspector in Brooklyn, NY.Responsibilities:
Perform Quality Control (QC) inspections on parts and sub-assemblies of rail cars.
Conduct visual inspections to ensure conformance to quality standards and identify non-conformances.
Follow engineering drawings, written procedures, and verbal/written instructions.
Use measuring instruments such as scales, tape measures, calipers, micrometers, and combination squares to inspect parts and equipment for proper installation on rail car bodies.
Proficient in using both English and Metric measurement systems.
Record inspection data and findings accurately in inspection reports and related documentation.
Demonstrate excellent mechanical aptitude and attention to detail.
Inspection Phases:
Receiving
Part Fabrication
Metal Matching
Sub-assembly
Shell Assembly
Truck Assembly & Test
Interior and Cab
Exterior
Under-floor
Source
Requirements:
Minimum of two (2) years of experience in a QC inspection role.
Ability to work independently and conduct final inspections on an entire rail car.
Proficiency with measuring instruments (tape measures, calipers, micrometers, etc.).
Ability to read, write, and speak English and interpret engineering drawings (blueprints).
Must be proficient in the English measurement system and able to learn the Metric system within a specified period.
Capable of working in an active manufacturing environment, climbing stairs and ladders, and lifting, pushing, or pulling up to 40 lbs.
Work Environment:
The work environment includes a combination of indoor and outdoor settings in an active manufacturing facility. Strict adherence to safety protocols and quality standards is required to ensure a safe and productive workplace.Company Overview:
Founded in 2010, Top Prospect Group was created with a focus on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services.
Qualified candidates are encouraged to apply immediately!
Please include a clean copy of your resume, salary expectations, and any references in your application.
$26-33 hourly 13d ago
Quality Inspector
Raycap Inc. 4.1
Quality inspector job in Kearny, NJ
Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction.
Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required.
Primary Job Responsibilities
Collects quality data as required to derive quality objectives
Executes and maintains comprehensive quality product inspections
Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions
Follows and promotes the use of and implementation of internal quality standards and procedures
Reviews documentation for compliance with quality standards
Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements
Conducts subassembly tests as required to ensure quality products
Uses measuring equipment such as calipers and gauges
Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications
Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings
Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position
Continuous assessment of opportunities for improvement and any needed changes to management systems
Qualifications
Hands-on quality and manufacturing experience in an ISO certified environment.
Proficient in MS Office, Access, Outlook, and Adobe programs
Experience with Document Control software
Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus
Who We Are
Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide.
We offer
A competitive benefit package
Paid Time Off from day one
10 annual company-paid holidays
A Tuition Reimbursement program
A generous 401(k) employer contribution
Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.
$30k-39k yearly est. Auto-Apply 37d ago
Quality Inspector (Mechanical parts)
Alan Baird Industries
Quality inspector job in Allendale, NJ
Full-time Description
A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation.
Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components.
Performs finished good inspections.
Performs start-up and in process inspections.
Monitors specific areas of production as directed by the Quality Control Supervisor.
Makes measurements and records data as per inspection forms or job cards.
Performs testing and records data for statistical process control (SPC) during manufacturing, (when required).
Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern.
Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern.
Performs computer set up for label printing programs on cutting lines.
Assists Engineering as needed for experimental testing.
Enters finished goods inspection data into BMS as appropriate.
Any other duties as assigned by supervisor.
Requirements
Excellent organizational skills and attention to detail.
Must have good documentation practice.
A proven understanding of part workmanship.
Ability to handle numbers required.
Strong interpersonal skills.
Ability to use micrometer, computers, testing equipment and electronic balance is essential.
Experience using Excel is preferred.
Ability to speak, read, and write in English.
Education & Experience
High school diploma or equivalent.
Working Conditions
While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles.
The noise level in the work environment is usually moderate.
Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc.
Ability to lift items weighing up to 15 lbs.
Pay: $22.00-$24.00/hour
Benefits:
Eligible after 1st day:
Paid holidays
Employee Assistance Program
Eligible after 90-day probation period:
Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance
Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account
Vacation time
Sick time
Eligible after 1 year of service:
401(k) with Employer Match
Potential for discretionary bonus
The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc.
We're proud to be an equal opportunity employer.
This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws.
If you need assistance or an accommodation due to a disability, contact us at **********************.
$22-24 hourly 60d+ ago
Quality Inspector
Council of Industry
Quality inspector job in Warwick, NY
We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility. The ideal candidate will be responsible for ensuring that products meet specified quality and reliability standards through inspections, measurements, and testing. This role requires a solid understanding of mechanical drawings, measurement tools, and quality control processes.
-Salary range- $22.00per hour- $25.00 per hour
-Benefits:
401(k)
Aflac
Dental insurance/ Vision insurance
Health insurance reimbursement
Life insurance
Paid time off
-Full Time- 8am to 4:30pm, Monday-Friday
Responsibilities
Interpret engineering drawings, schematic diagrams, and technical documentation to determine quality and reliability standards.
Collaborate with management and engineering teams to address quality concerns and establish inspection criteria.
Compile and evaluate statistical data to monitor and maintain product quality and consistency.
Conduct in-process and final inspections of rubber products using precision measuring instruments (e.g., calipers, micrometers).
Document inspection results, report non-conformances, and assist in root cause analysis and corrective actions.
Validate data or flag deviations from standards through reports and quality documentation.
Maintain accurate records of inspections and test results.
Ensure compliance with company and industry quality standards and safety regulations.
Qualifications
Qualifications:
High school diploma or equivalent required; additional technical training or certifications in quality inspection preferred.
Minimum 2 years of experience in a manufacturing or quality inspection role, preferably in the rubber industry.
Ability to read and interpret mechanical and engineering drawings.
Proficient with measuring tools such as calipers, micrometers, and other gauges.
Strong math and analytical skills.
Computer literate: familiarity with MS Office and quality management systems is a plus.
Excellent attention to detail, communication, and documentation skills.
Ability to work independently and in a team environment.
Physical Requirements:
Must be able to stand for extended periods and lift up to 50 lbs.
Manual dexterity for operating measurement tools.
Ability to work in a manufacturing environment with exposure to noise, machinery, and rubber materials.
Company Website
*********************************
$22-25 hourly Auto-Apply 60d+ ago
Quality Inspector III
Polymer Technologies, Inc. 4.2
Quality inspector job in Clifton, NJ
Job Description
Mission
Serve as a senior technical authority in dimensional inspection, measurement systems, calibration, and CMM programming. This role ensures that every inspection method, measurement tool, and calibration activity is accurate, compliant, and capable-directly protecting PTI's ability to deliver precision injection-molded components for aerospace, defense, and highly regulated industries.
Competencies - What This Person Must Be
Master Inspector & Metrology Expert: Advanced skills in dimensional inspection, GD&T, CMM (Calypso), vision systems, fixtures, and measurement troubleshooting.
Calibration & Measurement System Owner: Ensures all tooling, gages, fixtures, and instruments are accurate, controlled, and compliant with AS9100 requirements.
Process-Minded Technician: Understands how inspection results impact production capability, customer acceptance, and risk.
Detail-Oriented & Documentation-Driven: Produces accurate records for calibration, inspection plans, tooling status, and measurement traceability.
Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability.
Leadership & Mentorship: Guides Level 1 and Level 2 inspectors and supports training on measurement equipment, methods, and inspection strategies.
Key Responsibilities
Perform highest-complexity inspections and make final accept/reject decisions.
Create, update, and control inspection plans, visual standards, and metrology work instructions to help standardize inspection practices across the department.
Program and operate Zeiss CMMs (Calypso), OGP/Keyence vision systems, and other automated measurement platforms.
Develop fixturing concepts or collaborate with Engineering on inspection fixture design.
Troubleshoot measurement discrepancies, CMM program errors, and complex geometry issues.
Lead inspection readiness for customer source inspections, audits, and critical part reviews.
Own and oversee calibration ensuring all gages, fixtures, and measurement systems are properly maintained, scheduled, fully documented, compliant with AS9100, and supported through effective management of calibration records, out-of-tolerance investigations, and external vendor relationships.
Participate in dimensional-related root cause analysis, contributing measurement expertise during 8D, corrective action, and customer inquiries.
Ensure all inspection processes meet customer and regulatory requirements.
Train and mentor Level 1 and Level 2 inspectors on GD&T, inspection techniques, and equipment use.
Key Metrics & KPI's
≥ 98% Quality Shipments.
100% on-time completion of assigned inspections.
Zero escapes on parts inspected or approved.
Improved inspection efficiency and accuracy year-over-year.
100% compliance with safety and quality procedures
100% calibration compliance
Documented completion of inspector training and demonstrated skill improvement
Required Experience and Qualifications (Subject to Management Discretion)
High school diploma or equivalent; technical degree preferred.
5+ years of advanced inspection experience with strong GD&T and blueprint mastery
Hands-on CMM programming using Zeiss Calypso
Experience with OGP/Keyence or similar optical/vision systems
Experience with calibration system maintenance/management (GAGETrak preferred),
Strong communication, teamwork, and leadership skills.
Preferred Qualifications
ASQ Certified Quality Technician (CQT), Certified Quality Inspector (CQI), or metrology-related certification.
Experience in aerospace, defense, or medical device manufacturing.
Physical Requirements
Ability to work in both office and manufacturing floor environments.
Capable of lifting up to 40 lbs and accessing production and inspection equipment.
Manual dexterity for handling tools, parts, and inspection equipment.
Visual acuity sufficient to read documents, use computer screens, and inspect products or components.
Work Environment
Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations.
Requires use of PPE, including safety glasses, gloves, and hearing protection.
Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation's leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what's possible. If you can imagine it, we can build it.
PTI Tech supports some of the world's most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech's family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation's leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what's possible. If you can imagine it, we can build it. PTI Tech supports some of the world's most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech's family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.
$31k-44k yearly est. 5d ago
Incoming Quality Inspector
UNEX Corporation
Quality inspector job in South Hackensack, NJ
Job Description
General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards.
Essential Duties and Responsibilities
Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements.
Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM).
Verify material certifications, supplier documentation, and compliance with required standards.
Record and maintain inspection results, nonconformance reports, and supplier performance data.
Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials.
Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions.
Control of MRB and quality hold areas.
Follow and support ISO 9001:2015 quality management processes.
Ensure inspection tools and gauges are calibrated and in good working condition.
Maintain a clean, organized, and safe work area in accordance with company policies.
Supervisory Responsibilities None
Education/Experience Required
Minimum 2-4 years of experience in a quality control or inspection role.
Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment.
High School Diploma or equivalent required.
Technical or trade school training in mechanical inspection, or a related field is preferred.
Ability to read and interpret engineering drawings, blueprints, and GD&T specifications.
Proficient in the use of precision measuring instruments and inspection equipment.
Understanding of material certification requirements and industry quality standards.
Experience with CMM operation and basic programming a plus.
Strong attention to detail and accuracy in record-keeping.
Familiarity with ISO 9001:2015 quality systems preferred.
Computer Skills Necessary
Microsoft Office
Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent).
Physical Demands/Requirements
Ability to stand for extended periods during inspections.
Ability to lift up to 50lbs. occasionally.
$27k-40k yearly est. 26d ago
Incoming Quality Inspector
Hytorc
Quality inspector job in Mahwah, NJ
General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards.
Essential Duties and Responsibilities
* Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements.
* Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM).
* Verify material certifications, supplier documentation, and compliance with required standards.
* Record and maintain inspection results, nonconformance reports, and supplier performance data.
* Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials.
* Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions.
* Control of MRB and quality hold areas.
* Follow and support ISO 9001:2015 quality management processes.
* Ensure inspection tools and gauges are calibrated and in good working condition.
* Maintain a clean, organized, and safe work area in accordance with company policies.
Supervisory Responsibilities None
Education/Experience Required
* Minimum 2-4 years of experience in a quality control or inspection role.
* Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment.
* High School Diploma or equivalent required.
* Technical or trade school training in mechanical inspection, or a related field is preferred.
* Ability to read and interpret engineering drawings, blueprints, and GD&T specifications.
* Proficient in the use of precision measuring instruments and inspection equipment.
* Understanding of material certification requirements and industry quality standards.
* Experience with CMM operation and basic programming a plus.
* Strong attention to detail and accuracy in record-keeping.
* Familiarity with ISO 9001:2015 quality systems preferred.
Computer Skills Necessary
* Microsoft Office
* Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent).
Physical Demands/Requirements
* Ability to stand for extended periods during inspections.
* Ability to lift up to 50lbs. occasionally.
$28k-40k yearly est. 60d+ ago
Quality Inspector - Rail and Transit
Parsons Commercial Technology Group Inc.
Quality inspector job in Newark, NJ
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible.
Job Description:
Parsons is looking for an amazingly talented Quality Inspector to join our team! In this role you will get to work on the premier infrastructure project in the Country, as well as receive all of the benefits of working for Parsons! This Program is a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark NJ and NYC.
Program background
The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project.
As a tri-venture partner with Parsons, Arcadis, and Mace (MPA) is the Delivery Partners (DP)to provide advice, leadership, and support to GDC for the development and implementation of HTP. This is a master service with task order contracts for a 15-year contract encompassing a broad range of strategic advisory services, project management, design management, construction management, stakeholder coordination, federal compliance, operations support, office administration, and related services.
What You'll Be Doing:
* Conduct daily inspections of construction activities, including excavation, concrete work, tunnel lining, utilities, and other structural elements
* Verify materials, equipment, and workmanship meet project specifications and approved submittals.
* Prepare quality inspection reports
* Collaborate with safety teams to ensure that inspections align with health, safety, and environmental regulations.
* Coordinate independent testing.
* Coordinate contractor, subs and stakeholder field operations.
* Enforce safety standards on-site, including adherence to OSHA and other regulatory safety protocols.
* Identify potential safety hazards, report violations, and ensure contractors follow site-specific safety plans, especially around large shafts and excavation zones.
* Inspect materials and equipment used for excavation and tunneling, checking for compliance with quality standards.
* Document and report any deviations or deficiencies, working closely with contractors to address issues promptly to ensure quality throughout the project.
* Maintain detailed records of daily work activities, site conditions, and inspection results.
* Provide regular reports on progress, any issues encountered, and corrective actions taken, ensuring documentation aligns with project requirements.
* Work closely with construction supervisors and engineers to address any concerns that arise during inspection.
* Communicate inspection findings and collaborate on solutions to on-site issues, such as unexpected ground conditions or equipment adjustments.
What Required Skills You'll Bring:
* 10+ years experience
* This role demands a solid background in heavy civil construction with a focus on large shafts, tunnel lining, utilities, and excavation
* Requires being on-site for the majority of the time to provide continuous oversight
What Desired Skills You'll Bring:
* Bachelor's Degree in related field
* Experience with Mega Projects in the Rail and Transit industry
* Experience working with multiple partners and clients
* Tunneling experience a plus
Security Clearance Requirement:
None
This position is part of our Critical Infrastructure team.
For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next!
Salary Range: $48.51 - $84.90
We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle!
Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.
We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY!
Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************
$27k-39k yearly est. Auto-Apply 20d ago
Quality Inspector II
Thyssenkrupp Materials
Quality inspector job in Plainfield, NJ
Job SummaryVisual and dimensional inspection of customer materials, system/process audits, non-conformance investigation.Job Description
Key Accountabilities:
Accurately inspect materials and products with gauges, scales, or other measurement instruments as required and according to work instructions.
Management of non-conforming parts or material.
Maintain the system for the documentation for work performed.
Perform data entry of work results into appropriate databases.
May be required to identify causes of non-conformance.
Ability to access and work in SAP or other Warehouse Management System.
Meets TKMNA Employee Attributes/Competencies.
The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements.
This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws.
Qualifications:
Minimum Requirements:
This position requires access to export-controlled technical data or technology. Employment is contingent upon obtaining any required export authorization from the appropriate government agency or agencies.
When export authorization is necessary, the length of time to obtain the authorization by the government is outside of the Company's control.
Prior experience using basic measurement instruments and blueprint interpretation.
Prior experience in a quality assurance inspection position.
Prior experience with CMM inspection equipment.
Ability to read and write English and perform basic math problems.
Basic computer knowledge to complete data entry.
Attention to detail and accuracy.
Ability to accurately inspect material, commodities, and/or processes.
Preferred requirements:
Some college courses or certificates in Quality Assurance-related field of study
Benefits Overview
We offer competitive company benefits to eligible positions, such as :
Medical, Dental, Vision Insurance
Life Insurance and Disability
Voluntary Wellness Programs
401(k) and RRSP programs with Company Match
Paid Vacation and Holidays
Tuition Reimbursement
And more!
Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information.
Disclaimer
This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information.
TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers.
TK does not:
1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.;
2. Request payment of any kind from prospective jobseekers or candidates for employment;
3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK;
4. Send checks to job seekers; or
5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties.
PLEASE NOTE:
1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner;
2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK;
3. Anyone making an employment offer in return for money is not authorized by TK; and
4. TK reserves the right to take legal action, including criminal action, against such individuals/entities.
TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK.
If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************.
We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.
$27k-39k yearly est. Auto-Apply 60d+ ago
QUALITY INSPECTOR (for incoming RAW Materials & Finished Product) MUST have experience with testing equipment!
Impact Air 45
Quality inspector job in Englewood, NJ
The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment.
Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows:
Ensures company standard practices and cGMP procedures are followed.
Issue Batch Records to production and Finished Good inspection records to Operations
Maintains SOP binders and updates such through approved Change Controls.
Participate in internal and external audit process
Inspect and evaluate all incoming components and labeling
Inspection and testing of finished goods
Authorize release of Quarantined components for production use
Responsible for calibration schedules for testing and production equipment
PROVIDE SALARY HISTORY TO BE CONSIDERED
Qualifications
Relevant quality experience along with cGMP and 2 years experience preferred.
Experience with FDA compliance regulations a plus
Additional Information
To be considered you
MUST
provide the following:
Current resume
Full Salary History
Salary & Benefits
:
Salary will be based on experience
Medical Benefits package available
Schedule - F/T Monday to Friday 7:30 to 4:00 pm
PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.
$27k-40k yearly est. 4d ago
Lead Inspector / Risk Assessor
H.A. Bader Consultants
Quality inspector job in New York, NY
Job Description
We are seeking a Lead Inspector / Risk Assessor to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency.
Responsibilities:
Perform thorough examinations of all materials and finished products
Conduct and report internal audits and evaluations
Identify and troubleshoot equipment problems and defects
Participate in routine visual inspections
Maintain a clean and safe work environment
Qualifications:
Previous work experience in quality control or other related fields
Strong attention to detail
Strong analytical and critical thinking skills
Excellent written and verbal communication skills a must
Valid EPA lead license
Asbestos inspector license preferred, if not then a Bachelor's degree preferred or minimum Associate's degree
To be considered, please click "Apply Now."
$42k-70k yearly est. 4d ago
Quality Control Inspector - Third
Actalent
Quality inspector job in Wharton, NJ
Quality Inspector - 3rd Shift Join a quality‑driven manufacturing and laboratory environment where your attention to detail directly impacts product integrity and customer satisfaction. As a Quality Inspector, you'll play a key role in verifying incoming materials, supporting lab operations, and ensuring compliance with cGMP and QA standards.
What You'll Do
* Inspect incoming components and lab‑prepared samples to verify compliance with specifications, including appearance, dimensions, and overall integrity.
* Perform sampling and submission activities, including pulling samples from multiple pallets, completing submission forms, and making pass/reject decisions based on lab test results.
* Document all inspection activities accurately and consistently in alignment with SOPs, QA requirements, and audit expectations.
* Maintain compliance within the lab, ensuring proper labeling, cleanliness, and adherence to cGMP protocols.
* Assist with investigations related to out‑of‑spec results and support corrective and preventive action (CAPA) efforts.
* Collaborate with QC team members to uphold a strong culture of safety, accuracy, and continuous improvement.
Top Skills & Experience
* Component and material inspection
* Quality Control / Quality Assurance
* Laboratory environment experience
* GMP knowledge and compliance
* Strong documentation and organizational skills
Additional Qualifications
* Ability to work independently while maintaining high attention to detail
* Experience with component‑level inspections and lab‑based quality systems
* Strong communication skills and a commitment to accuracy and consistency
Experience Level
* Intermediate level; prior QC or inspection experience preferred
This position is moving fast! If interested please send over your updated resume to carendas @actalentservices.com with your availability for a 5 minute phone screen.
Job Type & Location
This is a Contract to Hire position based out of Wharton, NJ.
Pay and Benefits
The pay range for this position is $23.00 - $25.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Wharton,NJ.
Application Deadline
This position is anticipated to close on Jan 20, 2026.
About Actalent
Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500.
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
$23-25 hourly 16d ago
Mechanical Quality Control Inspector
Hansome Energy Systems
Quality inspector job in Linden, NJ
Job Title: Quality Control (QC) Inspector
Company: Hansome Energy Systems Employment Type: Full-Time
Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work.
Location & Facility Transition
This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move.
Position Overview
Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections.
Key Responsibilities
Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components.
Verify parts and assemblies against drawings, specifications, and quality standards.
Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment.
Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity.
Document inspection results, discrepancies, and nonconformances clearly and accurately.
Assist with root-cause investigations and corrective actions when defects are detected.
Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications.
Ensure products meet all requirements before release to the next production stage.
Collaborate closely with production, engineering, and quality teams to resolve issues.
Support continuous improvement and maintain compliance with internal and external quality requirements.
Qualifications
Required
High school diploma or equivalent.
1-3 years of experience in quality inspection or manufacturing.
Strong understanding of mechanical drawings, tolerances, and inspection requirements.
Proficiency with measurement tools such as calipers, micrometers, and gauges.
Strong attention to detail, accuracy, and documentation skills.
Ability to lift up to 50 lbs and stand for extended periods.
Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move.
Must be a US Citizen
Preferred
Experience in defense, aerospace, or other high-reliability manufacturing environments.
Familiarity with quality systems such as ISO 9001 or MIL-STD requirements.
Experience with nonconformance reporting (NCR), MRB processes, or internal audits.
Basic electrical knowledge or experience inspecting rotating electrical equipment.
Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.).
Work Environment
Full-time, on-site QC inspection role.
Work involves manufacturing floor, inspection stations, and documentation work areas.
Exposure to shop environments, machinery, and moderate noise (with proper PPE).
Quality- and safety-focused culture supporting defense and industrial programs.
Benefits
Competitive compensation
Health, dental, and vision insurance
Paid time off and holidays
Retirement plan options
Ongoing training and skill development
Opportunity to ensure quality for products supporting U.S. Navy and critical applications
How to Apply
Qualified candidates are encouraged to submit their resume and/or application to the Hansome Energy Systems hiring team.
$30k-50k yearly est. 60d+ ago
Part 145 Quality Control Inspector (Aviation)
Fly Alliance Group
Quality inspector job in Teterboro, NJ
:
Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and MRO. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has over 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape.
Role Objective:
Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.
Major Duties and Responsibilities:
Determine inspection status of aircraft in for scheduled inspection, as assigned.
Audit of inspection and maintenance work packages generated by the repair station
during the performance of maintenance
and repair.
Work with production personnel, Team Leaders, Lead Technicians and Technicians to
ensure accurate and complete
documentation of work performed in company work order packages.
Generation of maintenance record entries for aircraft, engines, propellers, and
accessories maintained by the repair station in
accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes
completion of FAA forms 337 and
8130-3 as required.
Assist in surveillance of the repair station facilities and procedures and report results to the
Chief Inspector.
Assist the Quality Assurance Manager and Chief Inspector in the development of
improved methods and procedures for the
performance of quality assurance functions.
Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the
technical publication libraries throughout
the repair station.
Assist the Quality Assurance Manager and Chief Inspector in the tracking and
calibration of inspection and test equipment used
by the repair station for the purpose of product acceptance.
The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when
required. This report will be submitted to the FAA within 96 hours after the malfunction or
defect has been discovered in accordance with 14 CFR§145.221.
Assist the Quality Assurance Manager and Chief Inspector as necessary in the
receiving inspection of parts or material
forwarded to him by the receiving inspector.
1 Assuring proper documentation of the preliminary inspection, hidden damage
inspection, and final inspections of all items
processed as assigned.
Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and
Operator/Air Carrier manuals.
Maintaining Quality Department work areas in a clean and orderly manner.
Assist the Quality Assurance Manager and Chief Inspector as dire
Knowledge, Skills and Abilities:
Knowledge of inspection techniques and tools within an FAA 145 repair station.
Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145.
High mechanical aptitude.
Ability to read schematics and blueprints.
Be proficient with PC and be familiar with MS office.
Knowledge of quality control.
Ability to interact with a group of coworkers.
Ability to work with complex equipment.
Ability to establish procedures.
Ability to work in a production-oriented environment.
Ability to work under frequent changing priorities.
Ability to select and evaluate priorities.
Ability to read and comprehend documentation written in the English language.
Problem-solving and decision-making skills.
Good written and verbal communication skills.
Self-starter with the ability to multi-task and prioritize workday/projects independently.
Ability to travel.
Work Conditions & Physical Requirements:
The employee must occasionally lift and/or move up to 50 pounds
Stands at least 75% of each workday.
Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination.
High organizational, time management and logic skills required
Ability to work at a desk in an office environment for extended periods of time
Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs.
Travel:
Some travel is required.
Required Education/Experience:
Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization.
Minimum of five years of experience in a supervisory position in a maintenance organization.
Minimum of ten years of experience in a Part 145 environment.
Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons.
Previous Director of Maintenance or Chief Inspector experience preferred.
FAA Airframe and Power Plant Certification or license (A&P)
Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements.
Subject to pre-employment and random drug testing.
Must pass a background check.
Direct Reports:
This role has direct reports.
Work Authorization:
Must be authorized to work in the United States of America.
Compensation:
Competitive pay based on experience
Medical including Health, Dental and Vision
Short-Term and Long-Term Disability Insurance
Paid Holidays
Paid Vacation
Profit Share Program
$30k-50k yearly est. 43d ago
QUALITY CONTROL INSPECTOR
Leading MacHining Manufacturer
Quality inspector job in New York, NY
Job Description
Inspect, test, or measure materials or products being produced
Performing and Approving the quality of raw materials before manufacturing begins
Read and understand blueprints and specifications
Monitor or observe operations to ensure that they meet production standards
Recommend adjustments to the process or assembly
Measure products with rulers, calipers, gauges, or micrometers
Accept or reject finished items
Remove all products and materials that fail to meet specifications
Discuss inspection results with those responsible for products
Report inspection and test data
Attention to details
Do incoming, in-process, and final inspection
Perform Receiving, 1st Piece and In-Process Inspections for work in process during manufacture
Verify and document that materials are manufactured to blueprint requirements
Maintain acceptable quality levels during manufacture of products and assemblies
Undertake special projects and other duties as assigned
Requirements:
3 - 5 years work experience or related work experience required
Education - College degree or equivalent
Must have ability to identify and resolve problems, effectively manage change and deal with conflict in a fast paced environment
Proficiency with calipers, micrometers, perform First Article inspection in accordance with AS9100 in process and final inspection processes a plus
Knowledge of operating electronic inspection equipment, such as coordinate-measuring machines (CMMs) a plus
Must be self-motivated and have the ability to work independently, within prescribed guidelines, or as a team member
Knowledge of MRP software systems and experience with enterprise resource planning (ERP) system a plus
Working knowledge of ISO 9001, 5S and/or Lean Manufacturing a plus
Aerospace product knowledge a plus
Must be a U.S. Citizen or Lawful Permanent Resident
Company DescriptionREQUIREMENTS
• Must be a U.S. Citizen or a Green Card holder
COMPANY OFFERS
•\tGrowing Backlog
•\tCompetitive Rate Structure (Depending on Ability and Experience)
•\tTrainings
•\tGreat Health, Dental and Vision Benefits, Life Insurance Package
•\tProfit Sharing and Bonuses
•\t401K Matching
•\tSafety Equipment
•\tModern Equipment and Attractive Shop
•\tEqual Employment OpportunityCompany DescriptionREQUIREMENTS\r • Must be a U.S. Citizen or a Green Card holder\r \r COMPANY OFFERS\r •\tGrowing Backlog\r •\tCompetitive Rate Structure (Depending on Ability and Experience)\r •\tTrainings\r •\tGreat Health, Dental and Vision Benefits, Life Insurance Package\r •\tProfit Sharing and Bonuses\r •\t401K Matching\r •\tSafety Equipment\r •\tModern Equipment and Attractive Shop\r •\tEqual Employment Opportunity
$27k-45k yearly est. 5d ago
Quality Control Inspector - TopView Sightseeing 1
Topview Sightseeing
Quality inspector job in New York, NY
TopView Sightseeing is seeking a sharp, reliable, and observant Quality Control Inspector to help maintain high service standards across our sightseeing operations, including bus, boat, and bike tours. This full-time, field-based role plays a key part in ensuring safe, high-quality experiences for thousands of daily customers across New York City.
Responsibilities:
Conduct undercover inspections of service quality across all TopView locations and brands
Monitor employee conduct and adherence to safety protocols and company standards
Perform passenger counts and compile data for internal industry analysis
Inspect competitor operations and provide detailed reports
Document and report inspection results, policy violations, and improvement suggestions
Collaborate with operations leadership to enhance service quality
Requirements:
High school diploma or GED
Experience in supervision, inspection, or monitoring preferred
NYC tourism experience is a plus
Strong attention to detail and ability to collect and report accurate data
Must have a smartphone and familiarity with Google Apps
Professional, trustworthy, and presentable
Excellent communication skills and a proactive attitude
Must be comfortable working 100% in the field, including weekends and holidays
Benefits:
Health insurance
401(k)
Paid time off
Join a fast-growing company and help shape the quality of NYC's top sightseeing experiences-apply today!
Powered by JazzHR
AEzMzKURVa
$27k-45k yearly est. 11d ago
Quality Control - Parts Inspector * OVERNIGHT
Generant Company 3.8
Quality inspector job in Butler, NJ
Full-time Description
About Generant:
Initially founded in the early 1930's, Generant designs and manufactures valves and pressure regulators for a wide variety of industries with a strong position in the Industrial Gases and Cryogenics, Medical Gases and Equipment, Energy, and Chemicals markets.
Generant is 100% employee-owned and is headquartered in Butler, NJ where most valve and regulator products are manufactured.
We look for dedicated and talented people who accept the responsibilities of thinking like owners and embrace our mission as stated in our Quality Policy:
“Our Goal is to provide our customers, suppliers and employees true value. We believe this can only be accomplished through a strong commitment to continuous improvement in the quality of our products, services and working environment.”
Our ideal candidates:
Are people who are personally motivated to produce high-quality work
Are lifelong learners - driven to continually improve
Are well organized
Enjoy working in a team environment
Join our growing team and be a part of our journey!
Generant is looking for a 3rd shift Quality Control Inspector Join our growing company!
3rd shift is Monday - Friday. 11:00pm - 07:30am
Job Summary:
The primary function of the Quality Control Inspector is to help assure the quality of finished goods and conformance to product requirements. This is accomplished by inspecting parts, checking calibration status of measurement devices, and documenting inspections and nonconformance.
Essential Functions:
· Conduct First Article Inspection and in-process inspections of products to ensure compliance with quality standards and specifications.
· Maintain Calibration of Metrology Tools
· Perform In-Process inspections, Final Inspection, Raw Material Inspection - Bar Stock, Inspection of Incoming Purchased Parts, and Outside Process Inspection
· Data Entry into Quality Databases
· Interpret mechanical drawings
· Communicate product and material nonconformances to management.
· Identify and report any deviations from quality standards to the appropriate personnel
· Collaborate with production teams to resolve quality issues and implement corrective actions
· Conduct root cause analysis and implement preventive measures to minimize defects and improve product quality
· Maintain accurate records of inspections, test results, and quality documentation.
· Assist in the development and implementation of quality control procedures and processes
· Other duties as assigned
Requirements
Qualifications:
Education/Experience/Skills:
· High School Diploma or equivalent
· 2+ years as a Quality Control Inspector in a manufacturing environment that produces metal pieces
· Able to read and interpret engineering drawings
· Must have a complete knowledge of metrology equipment and their uses including micrometers, calipers, indicators, depth micrometers, gauge pins, thread gauges and optical comparators
· Advanced Math Skills
· Strong knowledge of Statistical Process Control (SPC) techniques and tools
· Familiarity with quality control standards and regulations
· Must be able to work in a fast-paced environment
· Excellent attention to detail and analytical skills
· Ability to work independently and as part of a team
· Fluent in English (Good Verbal and Written Communication Skills)
· Ability to carryout detailed, written and verbal instructions
Physical Demands:
· Must frequently lift up to 25 pounds and occasionally lift up to 75 pounds
· When performing the duties of this job, the employee is regularly required to sit, use hands to finger or handle or feel objects and tools or controls and talk or hear
· Employee is frequently required to reach with hands and arms
· Employee is occasionally required to stand, walk, stoop, kneel, crouch, or crawl
· Specific vision abilities require close vision, distant vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
Work Environment:
· Inspector works near moving mechanical parts and is occasionally exposed to vibration
· Noise level is usually moderate for a manufacturing plant
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Benefits:
Medical, Dental, Vision, Employee Stock Ownership Plan (ESOP), 401k, Life and AD&D Insurance
Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
$40k-51k yearly est. 24d ago
Incoming Quality Inspector
UNEX Corporation
Quality inspector job in Mahwah, NJ
Job Description
General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards.
Essential Duties and Responsibilities
Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements.
Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM).
Verify material certifications, supplier documentation, and compliance with required standards.
Record and maintain inspection results, nonconformance reports, and supplier performance data.
Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials.
Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions.
Control of MRB and quality hold areas.
Follow and support ISO 9001:2015 quality management processes.
Ensure inspection tools and gauges are calibrated and in good working condition.
Maintain a clean, organized, and safe work area in accordance with company policies.
Supervisory Responsibilities None
Education/Experience Required
Minimum 2-4 years of experience in a quality control or inspection role.
Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment.
High School Diploma or equivalent required.
Technical or trade school training in mechanical inspection, or a related field is preferred.
Ability to read and interpret engineering drawings, blueprints, and GD&T specifications.
Proficient in the use of precision measuring instruments and inspection equipment.
Understanding of material certification requirements and industry quality standards.
Experience with CMM operation and basic programming a plus.
Strong attention to detail and accuracy in record-keeping.
Familiarity with ISO 9001:2015 quality systems preferred.
Computer Skills Necessary
Microsoft Office
Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent).
Physical Demands/Requirements
Ability to stand for extended periods during inspections.
Ability to lift up to 50lbs. occasionally.
$28k-40k yearly est. 26d ago
QUALITY INSPECTOR (for incoming RAW Materials & Finished Product) MUST have experience with testing equipment!
Impact Air 45
Quality inspector job in Englewood, NJ
Palisades Dental, LLC is a Medical Device Manufacturer and Distributor located in Englewood, NJ with products are available across the US.
Job Description
The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment.
Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows:
Ensures company standard practices and cGMP procedures are followed.
Issue Batch Records to production and Finished Good inspection records to Operations
Maintains SOP binders and updates such through approved Change Controls.
Participate in internal and external audit process
Inspect and evaluate all incoming components and labeling
Inspection and testing of finished goods
Authorize release of Quarantined components for production use
Responsible for calibration schedules for testing and production equipment
PROVIDE SALARY HISTORY TO BE CONSIDERED
Qualifications
Relevant quality experience along with cGMP and 2 years experience preferred.
Experience with FDA compliance regulations a plus
Additional Information
To be considered you MUST provide the following:
Current resume
Full Salary History
Salary & Benefits:
Salary will be based on experience
Medical Benefits package available
Schedule - F/T Monday to Friday 7:30 to 4:00 pm
PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.
How much does a quality inspector earn in Parsippany-Troy Hills, NJ?
The average quality inspector in Parsippany-Troy Hills, NJ earns between $23,000 and $47,000 annually. This compares to the national average quality inspector range of $25,000 to $42,000.
Average quality inspector salary in Parsippany-Troy Hills, NJ
$33,000
What are the biggest employers of Quality Inspectors in Parsippany-Troy Hills, NJ?
The biggest employers of Quality Inspectors in Parsippany-Troy Hills, NJ are: