Quality inspector jobs in Shoreline, WA - 198 jobs

Key Responsibilities: •Mechanical and Cosmetic inspection •Provide Quality control activities including new product introduction •Provide inspection services for incoming goods, returns and assembly •Document non-conformances and report major quality issues to leadership •First Article inspection Skills and Experience: •It is essential that the successful candidate have solid inspection experience gained in a manufacturing environment. •Technically competent, able to read and interpret engineering drawings. •Independence & Teamwork: Ability to work autonomously as well as collaborate effectively with a team. •Attention to Detail: Capable of maintaining precision in a fast-paced environment while meeting deadlines. •Strong Communication Skills: Good verbal and written communication and numerical skills are essential. •Familiarity with Quality disciplines including 8D reporting, 5 Whys and the completion of corrective action reports. (also essential)

Job Description Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI's as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. SIGN ON BONUS OF $2000.00 Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation Process warehouse materials Rely on instructions and pre-established guidelines/procedures to perform the functions of the job Support positive corrective actions and identification of root cause Other duties as assigned. Required Skills Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools MS Outlook, and EXCEL experience Experience with hand measurement gages, conduct conventional inspection to engineering requirements Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Valid drivers license and auto insurance required. Additional Desired Skills: Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem solving General Requirements Ability to handle complex situations and solve complex problems Ability to work effectively under pressure to meet deadlines Ability to press and analyze technical and business information Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers Ability to remain seated for up to 5 hours at a time Fluent English - reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Must be able to simultaneously manage several objectives Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): 3+ years' experience as a quality inspector or technician. 3+ years' experience in an aerospace manufacturing facility 3+ years' experience in inspection duties, FAI's GD&T, and b/p interpretation Proficient with Microsoft Office products Effective communication skills Detail oriented Any combination of education and experience may be considered The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision - Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches) • Far vision - Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50 • Color Perception - 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. Valid Driver's License Valid Auto Insurance WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday - Friday from 8:00 a.m. - 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 Federal rate mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral's full completion of 90 days' employment Pay Range $25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo's team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bDm4CbBgHH

At BRINC, we are redefining public safety with an innovative ecosystem of life-saving tools. Our journey started with the development of drones and ruggedized throw phones, designed to access unsafe areas and establish communication to de-escalate situations. Today, we've expanded into creating and deploying 911 response networks, where drones are dispatched to 911 calls to provide real-time visual data, enhancing safety and enabling de-escalation-focused responses. Our cutting-edge solutions are utilized by over 600 public safety agencies across America and the company has raised over $150M from investors, including Index Ventures, Motorola Solutions, Sam Altman, Dylan Field, Mike Volpe, Alexandr Wang and more. At BRINC, we are committed to recruiting the world's best talent to join us in our mission to support first responders in saving lives. About this Role: BRINC is seeking a Quality Inspector to ensure that every product we ship meets the rigorous quality standards our customers need as they utilize our drones to complete life-saving missions every day. As a Quality Inspector you will be responsible for performing in-process inspection as well as final inspection for all BRINC products. You are empowered to identify defects, bring these to the attention of the technician who built the product, require the defect to be repaired/corrected, and evaluate/fix any process gaps that resulted in the defect being generated in the first place. You will partner with the Quality, Test, and Design Engineering teams to identify critical-to-quality characteristics as well as the measurement method used to evaluate them. Key Responsibilities: * Use metrology equipment to ensure product performance for highly-complex hardware, including PCBAs, optics, harnessing, soldering, mechanical fastening, adhesives, etc. * Report nonconformances when defective material is found and establish a process for containing all suspect material. * Read/interpret work instructions and drawings to define and perform quality inspections. * Perform critical in-process and final inspections for assembled products and subassemblies, including optics, PCBAs, precision machined components, and composite components. * Develop SOPs for other inspectors (or technicians) to follow for day-to-day tasks. * Support Material Review Board discussions to determine product dispositions for nonconforming material. * Partner with manufacturing technicians to implement sustainable corrective actions when defects are root caused.. Qualifications: * 2+ years of experience in a technician role within aerospace, defense, or related industries. * 2+ years of experience reading/interpreting work instructions, engineering drawings, and/or inspection plans * 2+ years of experience using hand tools * 2+ years of experience using Calibrated tools, ie height gauges, calipers, micrometers, torque wrenches, etc. * Strong analytical and problem-solving skills Preferred Skills * Associate's Degree or higher * Experience with Material Review Board (MRB) activities * ASQ Quality Inspector certification or similar * Certified inspector to IPC-610 * Certified inspector to IPC-620 * Familiar with automated inspection equipment, including Romer arms, comparators, CMMs, and other metrology software based inspection methods * Part 107 Remote Pilot Certificate * 2+ years of experience with Root Cause Corrective Action (RCCA) * Understanding of SCAR and Nonconformance reports (NCR) BRINC Culture Values: * Try the hard stuff * Be innovative - Invent the future * Move fast * Listen to end-users * Strive for excellence * Don't build a dystopia * Be frugal * Save lives through technology If you're interested in this role and in joining BRINC, we hope you'll apply. We'd love to review your application and get to know more about you! BRINC is proud to be an equal opportunity employer that is resolute in cultivating an environment that promotes safety, diversity, inclusion and equity. We're committed to hiring the best talent - regardless of race, creed, color, ancestry, religion, sex (including pregnancy), national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, genetic information, veteran status, or any other characteristic protected by applicable laws, regulations and ordinances - and empowering every employee so they can do their best work. If you have a disability or special need, please let our recruiting team know - we strive to provide appropriate accommodation and assistance. Benefits and perks listed below may vary based on the nature of your employment with BRINC and/or the country within which you work * Comprehensive medical, dental and vision plans for our employees and their families * 401K plan * Maternity and paternity leave * Flexible Time Off (Exempt) / Paid time off (Non-Exempt) * Flexible work environment * Orca pass (for those in Puget Sound) * Free parking (Seattle office) * Free snacks, drinks and espresso (Seattle office)

The Quality Inspector - Level 3 is an intermediate to advanced level inspector, with the ability to fully perform the role of Quality Inspector - Level 1 and 2 along with the ability to operate CMMs and to interpret their results. The Quality Inspector - Level 3 is capable of a wide range of inspection activities to include the inspection of machined parts, assemblies, raw material, heat treat, and outside processing. Shift: Monday-Thursday, 3:30pm-2:00am, with training shift Monday-Friday, 7:00am-3:30pm for approximately 2-3 weeks. There is an additional $2.50/hr shift differential for the night shift. Reporting Relationships: The Quality Inspector - Level 3 reports directly to the Inspection Supervisor. Primary Duties & Responsibilities: Inspect fastener installation, sealant, raw material, machine parts, bushings installations, and standards, assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.) Document FAI report Document non-conformances Perform First Part inspections Perform final inspections May occasionally perform special projects Other duties as assigned Required Skills/Experience: Ability to be certified with Hardness and Eddy Current, Sealant, Bushing and bearing installation, electrical bonding, and fastener installation. Proficient in basic computer skills First part inspection of machined parts utilizing DCC CMM's and or manual inspection methods (PCDMIS experience preferred) Good knowledge and understanding of Geometric Dimension and Tolerancing (GD&T) methods per ASME 14.5 Good knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (running PCDMIS software). Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying shop math skills such as trigonometry, ability to calculate dimensions, set sine plate, etc. Identify and segregate non-conforming product Basic understanding of BQMS (Business Quality Management System) processes and procedures Understanding of machine shop and aerospace assembly terminology and nomenclature Fully experienced with all basic and advanced manual inspection tools Enter data using Syteline/ESI or other ERP systems as directed Ability to read and comprehend instructions and write simple correspondence Ability to read and write in English Ability to read and understand technical and engineering material and communicate effectively with coworkers Self-motivated with an ability to work alone or in a team environment Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals 2+ years with recent aircraft machine shop experience Level of Education: High School Diploma or equivalent education

Full-time Description Join us in the exciting role of providing a Construction Quality Control Inspector to provide technical services for the Tahoma National Cemetery at Kent, WA. This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. The project provides 27,000 gravesites, supporting infrastructure, and a new honor guard building, satellite public restroom, minor repairs, and access roads, parking, and signage. Work Period: This position is a full-time position for two years, plus two optional 3-month extensions. Essential Functions: Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE. Submittals, RFIs & approvals: Review contractor submittals, RFIs, samples, test/inspection reports, and installed work for technical compliance; recommend approval/disapproval and provide written feedback to the SRE. Schedule, progress & delays: Monitor schedules and daily activities; identify progress delays or slippage and recommend corrective actions to maintain the progress schedule. Contract changes & payments: Assist with change documentation (estimates, cost reviews, negotiations, change order packages) and review contractor payment requests, cost breakdowns, and quotations for SRE recommendation. Reporting & recordkeeping: Prepare and submit daily/weekly reports (work, manpower, safety), maintain complete job files, marked up plans/as builts, deficiency logs, photos, and records to support inspections, disputes, and government review. Safety & compliance: Perform weekly safety inspections, document environmental/EPA conditions, and report safety/compliance issues to the SRE. Materials, testing & commissioning: Maintain inventory of materials, supplies, and equipment; review material samples and cost loadings; coordinate special testing, commissioning, and utility inspections. Meetings & coordination: Attend/lead project and coordination meetings to resolve issues, manage phasing/traffic interruptions, and liaise with utilities, contractors, and VA representatives. Closeout & availability: Assist with final inspections, contract close-out activities, and be available for after-hours or weekend work as required; must communicate fluently in English. Benefits Package: Paid Time Off Paid Federal Observed Holidays Medical Insurance Dental and Vision Insurance Employee Paid Supplemental Insurance (Short Term Disability, Long Term Disability, Life, Accident, and Critical Illness) 401K - employer matching of up to 5% Equal Employment Opportunity (EEO): It has been and will continue to be a fundamental policy that GoldenWolf, LLC., is an Equal Opportunity Employer, including veterans and individuals with disabilities, committed to maintaining world-class facilities through technical excellence and innovation. About the Company: GoldenWolf is a Service-Disabled Veteran-Owned, Women-Owned Small Business that provides comprehensive facility management and support services to federal agencies. The company specializes in delivering a wide range of professional services, including facilities condition assessments, quality assurance, construction management, strategic planning, and technical support across civilian and defense sectors. We invite you to visit the GoldenWolf website at ****************** to learn more about the organization and explore other career opportunities. Requirements Education: Bachelor's degree in construction management, engineering, or Architecture from an accredited University. Qualifications: Minimum 2 years of experience working with a construction management team. Experience with observing and inspecting construction is required. Current OSHA 30 certification Certified Construction Manager (CCM) will receive greater consideration. Experience with Kahua, Primavera, and other construction management systems. Able to pass a security background check. Proficiency in Microsoft Office. Excellent verbal and written communication skills are necessary to effectively communicate with project stakeholders, contractors, and government personnel. The ability to write clear and concise reports is essential. Salary Description $90,000.00 - $120,000.00

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. Security Clearance: None/Not Required Collins Aerospace, a leader in aviation technology, is offering an exciting opportunity for a Quality Inspector to join our fast-paced and innovative team. In this critical role, you will support one of Collins' key value streams: Cabin Monuments & Integration. As a Quality Inspector, you will be at the heart of our quality team, performing receiving inspections within the compliance of AS9100 and FAA CFR 21 Certification Procedures for Products and Articles requirements Job Description: What You Will Do: Perform visual and dimensional inspection of purchased parts and materials using checklists, drawings, and standards. Obtain Documentation: Gather applicable drawings, specifications, quality standards, and inspection instructions. Ensure that the equipment is in reliable condition and calibrated if applicable. Control samples for conformity to drawings, specifications, and standards. Document inspection results and nonconforming conditions on the appropriate computer system. Identify product items as accepted or rejected. Conduct First Article Inspections. Inform supervision of any abnormal situations. Maintain a clean, safe, and orderly workstation. Attend and participate in quality-related training activities and department meetings as provided by management. Maintain or update skills necessary for proficient job performance. Perform other Quality Assurance oriented duties as assigned by supervisor. Personal Protective Equipment: Wear all personal protective equipment (PPE) as required. Adherence to EHS Policies Qualifications You Must Have: Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 2 years of relevant experience Qualifications We Prefer: Detail oriented and good communication skills. Product inspection experience and/or technical background is preferred. What We Offer: Some of our competitive benefits package includes: Medical, dental, and vision insurance. Three weeks of vacation for newly hired employees. Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option. Tuition reimbursement program. Student Loan Repayment Program. Life insurance and disability coverage. Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection. Birth, adoption, parental leave benefits. Ovia Health, fertility, and family planning. Adoption Assistance. Autism Benefit. Employee Assistance Plan, including up to 10 free counseling sessions. Healthy You Incentives, wellness rewards program. Doctor on Demand, virtual doctor visits. Bright Horizons, child and elder care services. Teladoc Medical Experts, second opinion program. And more! Learn More & Apply Now! Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? WE ARE REDEFINING AEROSPACE. *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionSalary: Typical $30+ DOE Responsibilities: Ensure work area is safe, organized and clean Ensure all measurement equipment is operational and calibrated Verify incoming material and components; (Cert verification/visual condition/physical measurements) Performs FAI in accordance with AS9102C First part verification Performs in process inspection Final inspection prior to shipping to end customer Documents inspection results Collaborate with production team on quality related issues Competency requirements: Proficient in the use of measuring tools MS Office products Experience Ability to read, write, and converse in English Desired (can train as needed): 3-5 years experience in inspection role 2+ years related experience within sheet metal manufacturing environment or 5+ years related experience within a manufacturing environment, or equivalent combination of education and experience. Experience with and working knowledge of ISO, AS standards and specifications. Knowledge of basic statistical process control Experience with ERP systems is a plus PHYSICAL REQUIREMENTS Must be able to lift forty pounds without assistance on occasions Must be able to sit, stand and move around continuously Company Overview: Buyken is a precision metal fabrication company that has been around since 1939. We have a dedicated team of experienced people with the common goal of creating the highest quality manufacturing solutions to meet our customers growing and changing needs. We stand by a few mantras: Do what is right for our customers, employees and community. Benefits offered (one of the best in the industry): 100% of medical, dental, vision and life expenses are covered (how many companies can say that?) Buyken pays part of your yearly max deductible as well, which is unheard of 401k retirement benefits with company match on top of: Safe-harbor investment (we put money into your retirement even if you dont!) Tuition reimbursement program and extensive training programs/opportunities/certifications No-limit profit sharing. When the company does well all benefit with no cap. Yearly awards, BBQs and other activities to foster team morale Attitude: You can't train for attitude, drive and self-motivation. Most everything is trainable if you have a good base to work from. You must hold yourself to a high standard of quality and accountability like the rest of the team.

Shift: 3:00PM - 1:30AM | 4/10 schedule The Composites Quality Inspector is responsible for overseeing daily activities and workflows related to Composites Quality Assurance at Karman Space & Defense. his role ensures all QA efforts are conducted in compliance with Karman's Quality Management System and AS9100 requirements. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement * WHAT YOU WILL DO Ensures that Karman's composites manufacturing meets all quality requirements, drawings, and specifications Provides quality support and process oversight for composites layup technicians, including inspection of workmanship, material handling, kit cut and layup, documentation, inspection reports and work flow Ensures that materials are received, stored, handled, and tracked appropriately Tracks all composite manufacturing and inspection documentation, documents all non-conformances, initiates and supports corrective actions and investigations Generates AS9102 First Article Inspection Reports Coordinates with suppliers to correct quality related issues Performs and supports quality and regulatory audits of the Composites Shop Works with engineering staff to support process definition and new product development WHAT WE ARE LOOKING FOR Required Education: HS Diploma Hands-on experience in aerospace composite layup desirable Inspection experience desirable Must be a U.S. Citizen SKILLS Highly organized. Strong written and verbal communication skills. Ability to read and interpret technical drawings and specifications. Comfortable using computers to look-up and input information. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description The Composites Quality Inspector is responsible for overseeing daily activities and workflows related to Composites Quality Assurance at Karman Space & Defense. his role ensures all QA efforts are conducted in compliance with Karman's Quality Management System and AS9100 requirements. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* WHAT YOU WILL DO Ensures that Karman's composites manufacturing meets all quality requirements, drawings, and specifications Provides quality support and process oversight for composites layup technicians, including inspection of workmanship, material handling, kit cut and layup, documentation, inspection reports and work flow Ensures that materials are received, stored, handled, and tracked appropriately Tracks all composite manufacturing and inspection documentation, documents all non-conformances, initiates and supports corrective actions and investigations Generates AS9102 First Article Inspection Reports Coordinates with suppliers to correct quality related issues Performs and supports quality and regulatory audits of the Composites Shop Works with engineering staff to support process definition and new product development WHAT WE ARE LOOKING FOR Required Education: HS Diploma Hands-on experience in aerospace composite layup desirable Inspection experience desirable Must be a U.S. Citizen SKILLS Highly organized. Strong written and verbal communication skills. Ability to read and interpret technical drawings and specifications. Comfortable using computers to look-up and input information. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Contract to Hire Schedule 7:00am -3:30pm Saxon is hiring a Quality Inspector II to ensure products meet all customer drawings, specifications, and quality requirements. Key Responsibilities: * Perform visual and dimensional inspections of in-house and supplier-produced parts, materials, and tooling. * Document non-conformities and inspection results accurately. * Support production and supervisory teams with quality information. * Verify final inspection kits before shipment. * Ensure compliance with customer purchase orders and documentation standards. * Conduct internal audits and prepare audit reports. * Provide training and assistance to other inspectors. Preferred Qualifications: * Strong blueprint reading and advanced math skills. * Proficient with hand inspection tools (calipers, height gauges, scales, etc.). * Ability to perform inspections across multiple work centers. * Familiar with industry record-keeping standards and digital inspection tools. * Strong analytical, problem-solving, and interpersonal skills. Education & Experience: * 6-12 months of related experience or equivalent training required. * 1-3 years of quality inspection experience in aerospace manufacturing preferred. * Experience with Lean Manufacturing and knowledge of autoclaves/ovens a plus. Follow us on LinkedIn! **************************************************** See more job postings here: ************************************** Saxon Aerospace Benefits include Medical Coverage, Prescription Coverage, and 401K Saxon Aerospace US Inc. is an equal opportunity employer. We value and embrace diversity. We do not discriminate based on race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age or disability status.

Our client, a successful second-generation independent family business, is experiencing significant growth and is seeking a highly skilled Lead Inspector to join their team. Specializing in fire protection systems, the company has expanded its workforce from 25 to 42 employees in the last five years and is now looking for an experienced professional to help them continue this momentum. As a Lead Inspector, you will be responsible for inspecting fire alarm and related systems across various structures, including multifamily residences, mixed-use commercial properties, assisted living facilities, and high-rise buildings. Your role will also involve mentoring an apprentice, playing a key part in developing the next generation of experts in this field. With most accounts located north of I-90, you will have the opportunity to call on multiple accounts per day if they're small or manage larger, multi-day inspections. Additionally, you will occasionally collaborate with other trades working on related systems. The company offers a guaranteed 80 hours per pay period, along with industry-leading compensation, which can be further enhanced if you are available for service calls. The company is known for its family-friendly, positive culture, emphasizing work/life balance, company functions, and opportunities for personal and professional growth. They offer comprehensive benefits, including medical, vision, and insurance coverage, PTO/holidays, paid time off during the holiday season (December 24-27), 401(k) with a 4% match, profit sharing, and support for training, study days, and certification testing. Responsibilities Conduct inspections of fire alarm and related systems in multifamily, commercial, assisted living, and high-rise structures. Mentor and guide an apprentice, ensuring the transfer of knowledge and skills. Manage multiple inspections daily for smaller accounts, or oversee large, multi-day inspections. Collaborate with other trades on projects involving related systems. Adhere to and enforce standard operating procedures (SOPs) to ensure thorough and accurate inspections. Maintain organization, punctuality, and professionalism on all job sites. Perform service calls as needed, with potential for additional compensation. Qualifications NICET II certification and O6 Electrical license required. Minimum of two years of experience in fire protection system inspections. Positive, family-friendly attitude with a strong fit for a collaborative and supportive culture. Ability to follow directions and accept feedback constructively. Highly organized, punctual, and able to lead by example. If you are a certified professional with a passion for fire protection systems and a desire to work in a supportive, family-oriented environment, we encourage you to apply. This role offers a unique opportunity to grow with a company that values expertise, teamwork, and a positive work/life balance.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

(2nd Shift / Mon - Fri, Weekends during Peak Season / 6:00PM - 2:30AM / Diff Pay) The Quality Control Technician is responsible for reviewing and verifying product labeling to ensure compliance with internal and regulatory specifications. The Quality Control Technician is also responsible for maintaining and promoting GMPs, SSOPs, Safety, and Food Safety described in Kettle Cuisine as the best practices. Key Responsibilities: Review and verify the content of labels including product name, lot#, Exp. Dates, regulatory and allergen information. Ensure labels meet regulatory requirements (e.g., FDA, USDA) Approve or reject labels depending on inspection criteria. Maintain accurate and traceable records of all label inspections and verifications. Participate in deviation, investigations of CAPAs regarding labeling errors. Performs verification of food safety and quality checks established in the KC-Everett Plant's HACCP/FSMA and Preventive Control Programs. Understand, Troubleshot and Escalate - Vision System if necessary. Assists QA management in the collection of data for the purpose of improving products and systems as necessary as it relates to food safety and quality (Statistical Process Controls). Work in a safe manner and follow all Kettle Cuisine standards, along with Federal, State, and Local regulations for occupational safety. Assist QA and site in accomplishing the KC-Everett Plant and QA departmental goals and objectives. Provide support to help with the investigation and troubleshooting of any food safety, quality, or process control related issues. Return labels and packaging supplies back to proper storage locations after usage. Maintain strong working relations with all the departments. Other duties as assigned. Qualifications and Experience Two years of related experience with respect to Quality Control. Good communication skills including computer, writing, and verbal. Ability to understand and verbally express ideas and instructions effectively. Ability to work effectively and efficiently with others. Ability to prioritize, follow instructions and follow-through to achieve results. Required Attributes Self-starter able to conceptualize and drive initiatives forward Positive attitude and motivated by contributing to the overall success of the team Able to develop strong relationships with internal and external stakeholders Creative problem-solving skills Obsessive attention to detail, well organized and able to juggle many projects at once Comfortable moving at a fast pace and in ambiguous environments Passionate about food Willing to address difficult situations head on with patience and respect Level Of Responsibility Works with little supervision, but work is reviewed. Exercises discretion within areas of responsibility. Recommends actions and alternatives to supervisor and others. Position has little to no contact with customers. Position makes an indirect contribution to efforts that generate moderate levels of revenue. Decisions or actions may have a moderate impact on other departments and/or the external relationships of the organization. Errors are usually detected after the fact and may result in moderate interruption and delays in work output. WORKING CONDITIONS AND PHYSICAL EFFORT The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical Demands/Efforts Work requires occasional physical exertion, including some lifting of objects weighing up to 25 pounds. Mental & Visual Demands Work performed by this position requires moderate concentration to effectively execute moderately complex tasks. Work occasionally requires some degree of visual effort for periods of time. Work Environment and Hazards Employee works in a manufacturing setting with some exposure to heat, cold, dust, or other factors of minor inconvenience. The position has some exposure to hazards that might cause minor injury. Must have availability and flexibility to work weekends or overtime as required.

Here's a quick overview of the role for your review: Job Title: Quality Calibration Technician Duration: 10+months(Possibilities for extension) Pay Range: $23.50/hr. On W2 Schedule: Mon to Fri 1st Shift 7: 00am to 3: 30pm Description: Job duties include but are not limited to: Monitors and maintains gage and process equipment calibration program. Calibrates M&TE to calibration standards. Manages gage R&R studies. Schedules outside calibration services, reviews and approves results to calibration standards. Works with Quality and Process Engineers to select appropriate measurement systems. Uses laser and touch probe CMMs along with standard measuring equipment to verify product as needed. Develop and improve calibration standards and procedures. Other task as needed and flexibility is key. Skills: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner. Familiar with Windows OS. Able to read and interpret drawings including knowledge of GD&T. Experience using Catia, AutoCAD, IGES files in a measuring environment. Prior Metrology / Calibration experience under ISO17025 system. Prior inspection experience using portable CMMs and surface tools. Experience writing work instructions. 1-3 years of experience within an ISO9000 or equivalent quality / manufacturing environment. Education preferred: CCT, CQT, CQE or Six Sigma Black Belt.

BPI Medical is growing at a remarkable rate and offers a rewarding career for a proven leader interested in making a difference every day. We embrace our entrepreneurial culture and have created a workplace where collaboration is essential, courage is rewarded, speed is expected, and agility is the norm to meet our customer's needs. Our motto is "Its gotta be right. its gotta be fast. no exceptions." We live by our values of Integrity, Quality, On-time Delivery, Collaboration, Growth Mindset and Compassion. We have a relaxed work atmosphere with an exceptional staff. We understand that continuous improvement is more than a business philosophy. It's a personal contribution to making our customers, our business, and our team members better every day. This position will engage in quality control activities designed to inspect, measure, and verify the effectiveness, and adherence to medical industry quality standards. The position is expected to work independently with the ability to exercise sound judgment, following established processes and procedures that govern quality control inspection. Conducting inspections and tests on incoming raw materials, components, and finished products to ensure they meet established quality standards and specifications. Performing visual inspections, measurements, and functional tests on medical devices to verify their compliance with applicable regulations and standards, such as ISO 13485 and FDA guidelines. Documenting inspection results and maintaining accurate records of quality control activities in accordance with regulatory requirements. Proficient in the use of mechanical inspection equipment; including micrometers, calipers, fixed gauges, optical comparator, CMM and other inspection measuring tools. Identifying and reporting non-conformities or deviations to appropriate personnel for investigation and corrective action. Participating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. Ensuring that inspection equipment and tools are calibrated and maintained in accordance with regulatory requirements and company procedures. Developing and implementing quality control procedures and work instructions to ensure consistent product quality. Collaborating with production staff and other stakeholders to address quality issues and drive continuous improvement. Participating in internal and external quality audits to ensure compliance with applicable regulations and standards. Communicating effectively with customers, suppliers, and other stakeholders on quality-related matters, including product quality, regulatory compliance, and quality system requirements. We are proud to be an Equal Opportunity Employer. BPI Medical, also known as Ben's Precision Instruments, was founded by a machinist-craftsman from Holland. Ben Overmars Sr. is both an immigrant and a worker performing fully with a disability. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. As a federal contractor, BPI Medical is required to participate in the federal government's E-Verify program. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington. As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications. Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate. Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks. Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements. Monitor manufacturing processes and document findings as required to ensure compliance with quality standards. Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications. Screen paperwork for options, substitutions, and effectiveness of parts and materials. Identify, investigate, and document discrepancies, reporting them to the shop as necessary. Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records. Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required. Coordinate and complete travelers, investigating and clearing check orders as necessary. Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed. Ensure that certifications for tools, test equipment, and personnel are current and compliant. Assist other employees by providing information and answering questions regarding functions, methods, and procedures. Perform first article inspections and FAA conformities, coordinating results as required. Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES). Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards. Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required. Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers. Refer to rejection tags and trouble reports to identify problems and initiate corrective actions. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 2+ years of experience as a Quality Inspector 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design) Experience working with Microsoft Office (Excel, Word, PowerPoint) Preferred Qualifications: Electrical experience Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement Applications for this position will be accepted until Feb. 20, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Composites Quality Inspector is responsible for overseeing daily activities and workflows related to Composites Quality Assurance at Karman Space & Defense. his role ensures all QA efforts are conducted in compliance with Karman's Quality Management System and AS9100 requirements. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS * Medical, Dental, Vision * Company Paid Life Insurance * 401(k) Retirement Savings Plan * Paid Time Off (PTO) * Paid Holidays * Tuition Reimbursement* WHAT YOU WILL DO * Ensures that Karman's composites manufacturing meets all quality requirements, drawings, and specifications * Provides quality support and process oversight for composites layup technicians, including inspection of workmanship, material handling, kit cut and layup, documentation, inspection reports and work flow * Ensures that materials are received, stored, handled, and tracked appropriately * Tracks all composite manufacturing and inspection documentation, documents all non-conformances, initiates and supports corrective actions and investigations * Generates AS9102 First Article Inspection Reports * Coordinates with suppliers to correct quality related issues * Performs and supports quality and regulatory audits of the Composites Shop * Works with engineering staff to support process definition and new product development WHAT WE ARE LOOKING FOR * Required Education: HS Diploma * Hands-on experience in aerospace composite layup desirable * Inspection experience desirable * Must be a U.S. Citizen SKILLS * Highly organized. * Strong written and verbal communication skills. * Ability to read and interpret technical drawings and specifications. * Comfortable using computers to look-up and input information. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis ("protected class") including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.