Quality inspector jobs in Tacoma, WA - 138 jobs

Job Description Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI's as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. SIGN ON BONUS OF $2000.00 Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation Process warehouse materials Rely on instructions and pre-established guidelines/procedures to perform the functions of the job Support positive corrective actions and identification of root cause Other duties as assigned. Required Skills Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools MS Outlook, and EXCEL experience Experience with hand measurement gages, conduct conventional inspection to engineering requirements Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Valid drivers license and auto insurance required. Additional Desired Skills: Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem solving General Requirements Ability to handle complex situations and solve complex problems Ability to work effectively under pressure to meet deadlines Ability to press and analyze technical and business information Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers Ability to remain seated for up to 5 hours at a time Fluent English - reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Must be able to simultaneously manage several objectives Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): 3+ years' experience as a quality inspector or technician. 3+ years' experience in an aerospace manufacturing facility 3+ years' experience in inspection duties, FAI's GD&T, and b/p interpretation Proficient with Microsoft Office products Effective communication skills Detail oriented Any combination of education and experience may be considered The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision - Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches) • Far vision - Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50 • Color Perception - 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. Valid Driver's License Valid Auto Insurance WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday - Friday from 8:00 a.m. - 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 Federal rate mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral's full completion of 90 days' employment Pay Range $25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo's team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bDm4CbBgHH

Full-time Description Join us in the exciting role of providing a Construction Quality Control Inspector to provide technical services for the Tahoma National Cemetery at Kent, WA. This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. The project provides 27,000 gravesites, supporting infrastructure, and a new honor guard building, satellite public restroom, minor repairs, and access roads, parking, and signage. Work Period: This position is a full-time position for two years, plus two optional 3-month extensions. Essential Functions: Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE. Submittals, RFIs & approvals: Review contractor submittals, RFIs, samples, test/inspection reports, and installed work for technical compliance; recommend approval/disapproval and provide written feedback to the SRE. Schedule, progress & delays: Monitor schedules and daily activities; identify progress delays or slippage and recommend corrective actions to maintain the progress schedule. Contract changes & payments: Assist with change documentation (estimates, cost reviews, negotiations, change order packages) and review contractor payment requests, cost breakdowns, and quotations for SRE recommendation. Reporting & recordkeeping: Prepare and submit daily/weekly reports (work, manpower, safety), maintain complete job files, marked up plans/as builts, deficiency logs, photos, and records to support inspections, disputes, and government review. Safety & compliance: Perform weekly safety inspections, document environmental/EPA conditions, and report safety/compliance issues to the SRE. Materials, testing & commissioning: Maintain inventory of materials, supplies, and equipment; review material samples and cost loadings; coordinate special testing, commissioning, and utility inspections. Meetings & coordination: Attend/lead project and coordination meetings to resolve issues, manage phasing/traffic interruptions, and liaise with utilities, contractors, and VA representatives. Closeout & availability: Assist with final inspections, contract close-out activities, and be available for after-hours or weekend work as required; must communicate fluently in English. Benefits Package: Paid Time Off Paid Federal Observed Holidays Medical Insurance Dental and Vision Insurance Employee Paid Supplemental Insurance (Short Term Disability, Long Term Disability, Life, Accident, and Critical Illness) 401K - employer matching of up to 5% Equal Employment Opportunity (EEO): It has been and will continue to be a fundamental policy that GoldenWolf, LLC., is an Equal Opportunity Employer, including veterans and individuals with disabilities, committed to maintaining world-class facilities through technical excellence and innovation. About the Company: GoldenWolf is a Service-Disabled Veteran-Owned, Women-Owned Small Business that provides comprehensive facility management and support services to federal agencies. The company specializes in delivering a wide range of professional services, including facilities condition assessments, quality assurance, construction management, strategic planning, and technical support across civilian and defense sectors. We invite you to visit the GoldenWolf website at ****************** to learn more about the organization and explore other career opportunities. Requirements Education: Bachelor's degree in construction management, engineering, or Architecture from an accredited University. Qualifications: Minimum 2 years of experience working with a construction management team. Experience with observing and inspecting construction is required. Current OSHA 30 certification Certified Construction Manager (CCM) will receive greater consideration. Experience with Kahua, Primavera, and other construction management systems. Able to pass a security background check. Proficiency in Microsoft Office. Excellent verbal and written communication skills are necessary to effectively communicate with project stakeholders, contractors, and government personnel. The ability to write clear and concise reports is essential. Salary Description $90,000.00 - $120,000.00

BPI Medical is growing at a remarkable rate and offers a rewarding career for a proven leader interested in making a difference every day. We embrace our entrepreneurial culture and have created a workplace where collaboration is essential, courage is rewarded, speed is expected, and agility is the norm to meet our customer's needs. Our motto is "Its gotta be right. its gotta be fast. no exceptions." We live by our values of Integrity, Quality, On-time Delivery, Collaboration, Growth Mindset and Compassion. We have a relaxed work atmosphere with an exceptional staff. We understand that continuous improvement is more than a business philosophy. It's a personal contribution to making our customers, our business, and our team members better every day. This position will engage in quality control activities designed to inspect, measure, and verify the effectiveness, and adherence to medical industry quality standards. The position is expected to work independently with the ability to exercise sound judgment, following established processes and procedures that govern quality control inspection. Conducting inspections and tests on incoming raw materials, components, and finished products to ensure they meet established quality standards and specifications. Performing visual inspections, measurements, and functional tests on medical devices to verify their compliance with applicable regulations and standards, such as ISO 13485 and FDA guidelines. Documenting inspection results and maintaining accurate records of quality control activities in accordance with regulatory requirements. Proficient in the use of mechanical inspection equipment; including micrometers, calipers, fixed gauges, optical comparator, CMM and other inspection measuring tools. Identifying and reporting non-conformities or deviations to appropriate personnel for investigation and corrective action. Participating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. Ensuring that inspection equipment and tools are calibrated and maintained in accordance with regulatory requirements and company procedures. Developing and implementing quality control procedures and work instructions to ensure consistent product quality. Collaborating with production staff and other stakeholders to address quality issues and drive continuous improvement. Participating in internal and external quality audits to ensure compliance with applicable regulations and standards. Communicating effectively with customers, suppliers, and other stakeholders on quality-related matters, including product quality, regulatory compliance, and quality system requirements. We are proud to be an Equal Opportunity Employer. BPI Medical, also known as Ben's Precision Instruments, was founded by a machinist-craftsman from Holland. Ben Overmars Sr. is both an immigrant and a worker performing fully with a disability. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. As a federal contractor, BPI Medical is required to participate in the federal government's E-Verify program. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Contract to Hire Schedule 7:00am -3:30pm Saxon is hiring a Quality Inspector II to ensure products meet all customer drawings, specifications, and quality requirements. Key Responsibilities: * Perform visual and dimensional inspections of in-house and supplier-produced parts, materials, and tooling. * Document non-conformities and inspection results accurately. * Support production and supervisory teams with quality information. * Verify final inspection kits before shipment. * Ensure compliance with customer purchase orders and documentation standards. * Conduct internal audits and prepare audit reports. * Provide training and assistance to other inspectors. Preferred Qualifications: * Strong blueprint reading and advanced math skills. * Proficient with hand inspection tools (calipers, height gauges, scales, etc.). * Ability to perform inspections across multiple work centers. * Familiar with industry record-keeping standards and digital inspection tools. * Strong analytical, problem-solving, and interpersonal skills. Education & Experience: * 6-12 months of related experience or equivalent training required. * 1-3 years of quality inspection experience in aerospace manufacturing preferred. * Experience with Lean Manufacturing and knowledge of autoclaves/ovens a plus. Follow us on LinkedIn! **************************************************** See more job postings here: ************************************** Saxon Aerospace Benefits include Medical Coverage, Prescription Coverage, and 401K Saxon Aerospace US Inc. is an equal opportunity employer. We value and embrace diversity. We do not discriminate based on race, color, national origin, religion, gender, gender identity or expression, sexual orientation, marital status, age or disability status.

Job DescriptionSalary: Typical $30+ DOE Responsibilities: Ensure work area is safe, organized and clean Ensure all measurement equipment is operational and calibrated Verify incoming material and components; (Cert verification/visual condition/physical measurements) Performs FAI in accordance with AS9102C First part verification Performs in process inspection Final inspection prior to shipping to end customer Documents inspection results Collaborate with production team on quality related issues Competency requirements: Proficient in the use of measuring tools MS Office products Experience Ability to read, write, and converse in English Desired (can train as needed): 3-5 years experience in inspection role 2+ years related experience within sheet metal manufacturing environment or 5+ years related experience within a manufacturing environment, or equivalent combination of education and experience. Experience with and working knowledge of ISO, AS standards and specifications. Knowledge of basic statistical process control Experience with ERP systems is a plus PHYSICAL REQUIREMENTS Must be able to lift forty pounds without assistance on occasions Must be able to sit, stand and move around continuously Company Overview: Buyken is a precision metal fabrication company that has been around since 1939. We have a dedicated team of experienced people with the common goal of creating the highest quality manufacturing solutions to meet our customers growing and changing needs. We stand by a few mantras: Do what is right for our customers, employees and community. Benefits offered (one of the best in the industry): 100% of medical, dental, vision and life expenses are covered (how many companies can say that?) Buyken pays part of your yearly max deductible as well, which is unheard of 401k retirement benefits with company match on top of: Safe-harbor investment (we put money into your retirement even if you dont!) Tuition reimbursement program and extensive training programs/opportunities/certifications No-limit profit sharing. When the company does well all benefit with no cap. Yearly awards, BBQs and other activities to foster team morale Attitude: You can't train for attitude, drive and self-motivation. Most everything is trainable if you have a good base to work from. You must hold yourself to a high standard of quality and accountability like the rest of the team.

The Quality Inspector - Level 3 is an intermediate to advanced level inspector, with the ability to fully perform the role of Quality Inspector - Level 1 and 2 along with the ability to operate CMMs and to interpret their results. The Quality Inspector - Level 3 is capable of a wide range of inspection activities to include the inspection of machined parts, assemblies, raw material, heat treat, and outside processing. Shift: Monday-Thursday, 3:30pm-2:00am, with training shift Monday-Friday, 7:00am-3:30pm for approximately 2-3 weeks. There is an additional $2.50/hr shift differential for the night shift. Reporting Relationships: The Quality Inspector - Level 3 reports directly to the Inspection Supervisor. Primary Duties & Responsibilities: Inspect fastener installation, sealant, raw material, machine parts, bushings installations, and standards, assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.) Document FAI report Document non-conformances Perform First Part inspections Perform final inspections May occasionally perform special projects Other duties as assigned Required Skills/Experience: Ability to be certified with Hardness and Eddy Current, Sealant, Bushing and bearing installation, electrical bonding, and fastener installation. Proficient in basic computer skills First part inspection of machined parts utilizing DCC CMM's and or manual inspection methods (PCDMIS experience preferred) Good knowledge and understanding of Geometric Dimension and Tolerancing (GD&T) methods per ASME 14.5 Good knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (running PCDMIS software). Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying shop math skills such as trigonometry, ability to calculate dimensions, set sine plate, etc. Identify and segregate non-conforming product Basic understanding of BQMS (Business Quality Management System) processes and procedures Understanding of machine shop and aerospace assembly terminology and nomenclature Fully experienced with all basic and advanced manual inspection tools Enter data using Syteline/ESI or other ERP systems as directed Ability to read and comprehend instructions and write simple correspondence Ability to read and write in English Ability to read and understand technical and engineering material and communicate effectively with coworkers Self-motivated with an ability to work alone or in a team environment Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals 2+ years with recent aircraft machine shop experience Level of Education: High School Diploma or equivalent education

Provides inspection support for all activities within the Systima Electrical Shop. Inspects to the requirements of Systima's engineering documentation, and IPC-610/620 where applicable. Ensures that traceability and documentation is commensurate with job requirements. Reviews planning submitted to Electrical Shop. Also supports Quality related workflows through the Electrical Shop as required by Systima's Quality Management System and AS9100. Reports to the Quality Manager. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement * WHAT YOU WILL DO Inspects hardware from Systima Electrical Shop to ensure quality, drawing, and specification requirements are met Ensures that materials are stored, handled, and tracked appropriately per requirements Ensures manufacturing and inspection documentation is created and recorded appropriately Ensures that non-conformances are documented appropriately Generates AS9102 First Article Inspection Reports where required Supports quality and regulatory audits of the Electrical Shop Initiates and supports Corrective Actions and investigations where applicable Works with Design, Manufacturing, and Quality Engineers for new product and process definition WHAT WE ARE LOOKING FOR Required Education: HS Diploma Preferred Education: AA in related field Inspection experience in soldering and/or wire harness manufacturing Working experience in an AS9100 or ISO9001 compliant manufacturing environment Previous certification in IPC-610/620 or J-STD desirable Must be a U.S. Citizen Must hold or be able to obtain a DoD SECRET clearance EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Job Description The Composites Quality Inspector is responsible for overseeing daily activities and workflows related to Composites Quality Assurance at Karman Space & Defense. his role ensures all QA efforts are conducted in compliance with Karman's Quality Management System and AS9100 requirements. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* WHAT YOU WILL DO Ensures that Karman's composites manufacturing meets all quality requirements, drawings, and specifications Provides quality support and process oversight for composites layup technicians, including inspection of workmanship, material handling, kit cut and layup, documentation, inspection reports and work flow Ensures that materials are received, stored, handled, and tracked appropriately Tracks all composite manufacturing and inspection documentation, documents all non-conformances, initiates and supports corrective actions and investigations Generates AS9102 First Article Inspection Reports Coordinates with suppliers to correct quality related issues Performs and supports quality and regulatory audits of the Composites Shop Works with engineering staff to support process definition and new product development WHAT WE ARE LOOKING FOR Required Education: HS Diploma Hands-on experience in aerospace composite layup desirable Inspection experience desirable Must be a U.S. Citizen SKILLS Highly organized. Strong written and verbal communication skills. Ability to read and interpret technical drawings and specifications. Comfortable using computers to look-up and input information. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

At BRINC, we are redefining public safety with an innovative ecosystem of life-saving tools. Our journey started with the development of drones and ruggedized throw phones, designed to access unsafe areas and establish communication to de-escalate situations. Today, we've expanded into creating and deploying 911 response networks, where drones are dispatched to 911 calls to provide real-time visual data, enhancing safety and enabling de-escalation-focused responses. Our cutting-edge solutions are utilized by over 600 public safety agencies across America and the company has raised over $150M from investors, including Index Ventures, Motorola Solutions, Sam Altman, Dylan Field, Mike Volpe, Alexandr Wang and more. At BRINC, we are committed to recruiting the world's best talent to join us in our mission to support first responders in saving lives. About this Role: BRINC is seeking a Quality Inspector to ensure that every product we ship meets the rigorous quality standards our customers need as they utilize our drones to complete life-saving missions every day. As a Quality Inspector you will be responsible for performing in-process inspection as well as final inspection for all BRINC products. You are empowered to identify defects, bring these to the attention of the technician who built the product, require the defect to be repaired/corrected, and evaluate/fix any process gaps that resulted in the defect being generated in the first place. You will partner with the Quality, Test, and Design Engineering teams to identify critical-to-quality characteristics as well as the measurement method used to evaluate them. Key Responsibilities: Use metrology equipment to ensure product performance for highly-complex hardware, including PCBAs, optics, harnessing, soldering, mechanical fastening, adhesives, etc. Report nonconformances when defective material is found and establish a process for containing all suspect material. Read/interpret work instructions and drawings to define and perform quality inspections. Perform critical in-process and final inspections for assembled products and subassemblies, including optics, PCBAs, precision machined components, and composite components. Develop SOPs for other inspectors (or technicians) to follow for day-to-day tasks. Support Material Review Board discussions to determine product dispositions for nonconforming material. Partner with manufacturing technicians to implement sustainable corrective actions when defects are root caused.. Qualifications: 2+ years of experience in a technician role within aerospace, defense, or related industries. 2+ years of experience reading/interpreting work instructions, engineering drawings, and/or inspection plans 2+ years of experience using hand tools 2+ years of experience using Calibrated tools, ie height gauges, calipers, micrometers, torque wrenches, etc. Strong analytical and problem-solving skills Preferred Skills Associate's Degree or higher Experience with Material Review Board (MRB) activities ASQ Quality Inspector certification or similar Certified inspector to IPC-610 Certified inspector to IPC-620 Familiar with automated inspection equipment, including Romer arms, comparators, CMMs, and other metrology software based inspection methods Part 107 Remote Pilot Certificate 2+ years of experience with Root Cause Corrective Action (RCCA) Understanding of SCAR and Nonconformance reports (NCR) BRINC Culture Values: Try the hard stuff Be innovative - Invent the future Move fast Listen to end-users Strive for excellence Don't build a dystopia Be frugal Save lives through technology If you're interested in this role and in joining BRINC, we hope you'll apply. We'd love to review your application and get to know more about you! BRINC is proud to be an equal opportunity employer that is resolute in cultivating an environment that promotes safety, diversity, inclusion and equity. We're committed to hiring the best talent - regardless of race, creed, color, ancestry, religion, sex (including pregnancy), national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, genetic information, veteran status, or any other characteristic protected by applicable laws, regulations and ordinances - and empowering every employee so they can do their best work. If you have a disability or special need, please let our recruiting team know - we strive to provide appropriate accommodation and assistance. Benefits and perks listed below may vary based on the nature of your employment with BRINC and/or the country within which you work Comprehensive medical, dental and vision plans for our employees and their families 401K plan Maternity and paternity leave Flexible Time Off (Exempt) / Paid time off (Non-Exempt) Flexible work environment Orca pass (for those in Puget Sound) Free parking (Seattle office) Free snacks, drinks and espresso (Seattle office)

The Lighthouse for the Blind, Inc. transforms the lives of people who are blind, DeafBlind, and blind with other disabilities. Through employment opportunities, we are a catalyst for empowerment. We foster self-confidence and instill a life changing affirmation that independence is possible. From our expertise in cutting-edge technology to our understanding of mobility, we help people who are blind and DeafBlind live fulfilling lives. We believe everyone, no matter their vision abilities, deserves to experience the power of employment. Our goal for each person we reach is to ignite a fire of determination that is centered on the reality that blindness doesn't define who you are or how you choose to live. We are currently seeking a person who identifies strongly with our mission and core values to join our team in Seattle as a Quality Inspector I in our Aerospace Division. This is an ideal role for someone who has previous quality inspection experience in aerospace, basic knowledge of inspection devices and tools, possesses strong math skills, and who has the ability to work well with employees at all levels in each department who come from various backgrounds as noted in the job description below. Are you also motivated and driven by self-improvement. and are a self starter who is very reliable? If so, please apply so that we can talk to you! Please Note: Currently we have one position available in 1st shift and one position available in 2nd shift. Purpose: Performs various inspections to determine acceptability of manufactured products. Responsibilities: Inspects and determines acceptability per customer requirements. Performs receiving, first part, in-process, and final inspections of simple items. Understands customer requirements and assures compliance to standards. Verify that all required documentation is completed to assure process control. Assists Quality Engineer and others on corrective action. Continuing education classes will be required. Assist in detecting problems and confer with lead or supervisor to resolve. Ensures the adherence to company safety and health standards, policies and procedures by monitoring personnel, machinery and work environment. Immediately notify supervisor and/or Safety Manager of any safety and health concerns and problems. Performs other duties as assigned. Minimum Requirements: High school degree or equivalent preferred. Shop math preferred. Basic knowledge of inspection devices and tools required. Strong sense of responsibility, initiative and teamwork. Ability to work well with employees at all levels in each department who come from various backgrounds and may require special communication methods, (i.e. Braille, large print, interpreter, voice only) required. Basic PC skills such as Microsoft Suites and data entry. Ability to prioritize multiple tasks with strong organizational skills required. Ability to follow clear instructions and provide prompt feedback or results. Ability to work schedule as assigned. Company benefits may include: 12 Paid Holidays per year Up to 17 days of Paid Time Off (PTO) per year Medical, Dental, and vision plans Long-term and short-term disability, AD&D Life Insurance 403(b) Retirement Plan with 6% employer match Tuition Reimbursement Employee Assistance Program (EAP) Team Member Referral Bonus Program Paid Leave for Service Animal Training Focus on Upward Mobility Inclusive and Supportive Team Environment The Lighthouse for the Blind, Inc. is an equal opportunity employer and does not discriminate on the basis of age, sex, marital status, sexual orientation, gender identity, race, creed, color, national origin, honorably discharged veteran or military status, the presence of any sensory, mental or physical disability, the use of a dog guide or service animal by a person with a disability, or any other characteristic protected by federal, state, or local law.

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 10 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Quality Inspector in our Assembly department to perform inspection functions of assembled parts. Our Quality Inspectors inspect products and/or documents at various stages of production, to validate processes and provide documentation required to show compliance to the Sonaca North America Quality System, while under close supervision. Also, read and interpret customer instructions, blueprints, charts and other statistical information; prepare parts and documentation for outside criteria; and participate in work center and other problem-solving teams as requested. ESSENTIAL JOB RESPONSIBILITIES Inspectors assist production personnel in establishing and documenting inspection criteria, prepare parts and documentation to meet outside criteria, completes all required inspection documentation and communicates as needed with customers. Entering data into the Work Order Tracking System, including notes and recording data on the work order. Documenting Nonconforming Material per the Quality System Requirements. Assists in identifying parts deficiencies and helps to prevent further recurrences. Determining whether the product is acceptable or unacceptable according to work order and customer requirements. Responsibly handle “stop the job” authority at any stage of process. Perform sampling inspection. Perform Adhesion Testing requirements. Maintain good housekeeping in the inspection areas. Handle customer-supplied product with care. Properly use calibrated thickness masters, shims, certified master materials samples, etc. Verify the job, matching the actual parts with the work order, part number(s), printed and/or electronic pictures and part count. Maintain Sonaca North America's quality standards to meet and exceed customer expectations. Access all applicable Prime customer specification requirements on SharePoint site. Manages time effectively so that production, quality and delivery schedules are met. Interacts professionally with co-workers and vendors, understands internal customers, and strives to maintain good relations with others. Follow all safety requirements and enforce compliance. Work overtime, when required (including weekends), on short notice. Perform other duties as assigned by the Inspection Lead. Responds quickly to inquiries and follows up, as needed. Embraces change to ensure overall success of the company. EDUCATION AND EXPERIENCES High school diploma or high school equivalency preferred. Candidates that do not have a high school diploma or high school equivalency will be required to take a pre-employment assessment to be considered for the role. Must have ability to read and comprehend American English. Must have ability to read, interpret, and understand customer drawing, mylars and sketches as applicable to work being performed. Must develop a good working knowledge of all internal procedures and customer requirements. Must develop a good working knowledge of the processes performed in the chemical processing area. Must exhibit good communication skills when dealing with inspection personnel, on-floor operators and customer service representatives. Must be flexible, self-driven. Must become proficient in using the Work Order Tracking Program, and the Quality System on the SharePoint site. Must exhibit professionalism when dealing with subordinates and superiors. Must exhibit ability to troubleshoot and correct problems using problem-solving skills. Must have ability to follow written and verbal directions. Must have ability to apply basic math skills. Must exhibit interpersonal, verbal and written communication skills. Must exhibit attention-to-detail. Must have ability to handle stressful situations Must be honest and ethical in all actions. Motivational skills desired. Presentation skills desired. Organizational and planning skills desired. Analytical skills desired. Must possess a positive attitude. Must be dependable. Must have demonstrated team-building capabilities. Must have a demonstrated strong work ethic. Physical Requirements Ability to sit or stand for extended periods of time Noise levels ranging from quiet to extremely loud Required to wear Personal Protective Equipment (PPE) when working on the manufacturing floor including, but not limited to, eye, ear, and foot protection May occasionally lift and /or move up to 10-50 pounds WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. 401(k) retirement savings plan with a percentage company-match contribution Competitive wages Paid holidays Paid time off Medical, dental, vision, life, and accidental insurance Short-term disability Long-term disability Employee assistance plan - for access to counseling, consulting and other community resources Wellness program Tuition assistance Subject to eligibility, terms, and conditions Pay Range $22- $24 per hour This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America‘s Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates (“LMI Aerospace”). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 10 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Quality Inspector in our Assembly department to perform inspection functions of assembled parts. Our Quality Inspectors inspect products and/or documents at various stages of production, to validate processes and provide documentation required to show compliance to the Sonaca North America Quality System, while under close supervision. Also, read and interpret customer instructions, blueprints, charts and other statistical information; prepare parts and documentation for outside criteria; and participate in work center and other problem-solving teams as requested. ESSENTIAL JOB RESPONSIBILITIES * Inspectors assist production personnel in establishing and documenting inspection criteria, prepare parts and documentation to meet outside criteria, completes all required inspection documentation and communicates as needed with customers. * Entering data into the Work Order Tracking System, including notes and recording data on the work order. * Documenting Nonconforming Material per the Quality System Requirements. * Assists in identifying parts deficiencies and helps to prevent further recurrences. * Determining whether the product is acceptable or unacceptable according to work order and customer requirements. * Responsibly handle "stop the job" authority at any stage of process. * Perform sampling inspection. * Perform Adhesion Testing requirements. * Maintain good housekeeping in the inspection areas. * Handle customer-supplied product with care. * Properly use calibrated thickness masters, shims, certified master materials samples, etc. * Verify the job, matching the actual parts with the work order, part number(s), printed and/or electronic pictures and part count. * Maintain Sonaca North America's quality standards to meet and exceed customer expectations. * Access all applicable Prime customer specification requirements on SharePoint site. * Manages time effectively so that production, quality and delivery schedules are met. * Interacts professionally with co-workers and vendors, understands internal customers, and strives to maintain good relations with others. * Follow all safety requirements and enforce compliance. * Work overtime, when required (including weekends), on short notice. * Perform other duties as assigned by the Inspection Lead. * Responds quickly to inquiries and follows up, as needed. * Embraces change to ensure overall success of the company. EDUCATION AND EXPERIENCES * High school diploma or high school equivalency preferred. Candidates that do not have a high school diploma or high school equivalency will be required to take a pre-employment assessment to be considered for the role. * Must have ability to read and comprehend American English. * Must have ability to read, interpret, and understand customer drawing, mylars and sketches as applicable to work being performed. * Must develop a good working knowledge of all internal procedures and customer requirements. * Must develop a good working knowledge of the processes performed in the chemical processing area. * Must exhibit good communication skills when dealing with inspection personnel, on-floor operators and customer service representatives. * Must be flexible, self-driven. * Must become proficient in using the Work Order Tracking Program, and the Quality System on the SharePoint site. * Must exhibit professionalism when dealing with subordinates and superiors. * Must exhibit ability to troubleshoot and correct problems using problem-solving skills. * Must have ability to follow written and verbal directions. * Must have ability to apply basic math skills. * Must exhibit interpersonal, verbal and written communication skills. * Must exhibit attention-to-detail. * Must have ability to handle stressful situations * Must be honest and ethical in all actions. * Motivational skills desired. * Presentation skills desired. * Organizational and planning skills desired. * Analytical skills desired. * Must possess a positive attitude. * Must be dependable. * Must have demonstrated team-building capabilities. * Must have a demonstrated strong work ethic. Physical Requirements * Ability to sit or stand for extended periods of time * Noise levels ranging from quiet to extremely loud * Required to wear Personal Protective Equipment (PPE) when working on the manufacturing floor including, but not limited to, eye, ear, and foot protection * May occasionally lift and /or move up to 10-50 pounds WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. * 401(k) retirement savings plan with a percentage company-match contribution * Competitive wages * Paid holidays * Paid time off * Medical, dental, vision, life, and accidental insurance * Short-term disability * Long-term disability * Employee assistance plan - for access to counseling, consulting and other community resources * Wellness program * Tuition assistance Subject to eligibility, terms, and conditions Pay Range $22- $24 per hour This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an "at will" basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America's Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates ("LMI Aerospace"). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job Description Our client, a successful second-generation independent family business, is experiencing significant growth and is seeking a highly skilled Lead Inspector to join their team. Specializing in fire protection systems, the company has expanded its workforce from 25 to 42 employees in the last five years and is now looking for an experienced professional to help them continue this momentum. As a Lead Inspector, you will be responsible for inspecting fire alarm and related systems across various structures, including multifamily residences, mixed-use commercial properties, assisted living facilities, and high-rise buildings. Your role will also involve mentoring an apprentice, playing a key part in developing the next generation of experts in this field. With most accounts located north of I-90, you will have the opportunity to call on multiple accounts per day if they're small or manage larger, multi-day inspections. Additionally, you will occasionally collaborate with other trades working on related systems. The company offers a guaranteed 80 hours per pay period, along with industry-leading compensation, which can be further enhanced if you are available for service calls. The company is known for its family-friendly, positive culture, emphasizing work/life balance, company functions, and opportunities for personal and professional growth. They offer comprehensive benefits, including medical, vision, and insurance coverage, PTO/holidays, paid time off during the holiday season (December 24-27), 401(k) with a 4% match, profit sharing, and support for training, study days, and certification testing. Responsibilities Conduct inspections of fire alarm and related systems in multifamily, commercial, assisted living, and high-rise structures. Mentor and guide an apprentice, ensuring the transfer of knowledge and skills. Manage multiple inspections daily for smaller accounts, or oversee large, multi-day inspections. Collaborate with other trades on projects involving related systems. Adhere to and enforce standard operating procedures (SOPs) to ensure thorough and accurate inspections. Maintain organization, punctuality, and professionalism on all job sites. Perform service calls as needed, with potential for additional compensation. Qualifications NICET II certification and O6 Electrical license required. Minimum of two years of experience in fire protection system inspections. Positive, family-friendly attitude with a strong fit for a collaborative and supportive culture. Ability to follow directions and accept feedback constructively. Highly organized, punctual, and able to lead by example. If you are a certified professional with a passion for fire protection systems and a desire to work in a supportive, family-oriented environment, we encourage you to apply. This role offers a unique opportunity to grow with a company that values expertise, teamwork, and a positive work/life balance.

Responsibilities: Ensure work area is safe, organized and clean Ensure all measurement equipment is operational and calibrated Verify incoming material and components; (Cert verification/visual condition/physical measurements) Performs FAI in accordance with AS9102C First part verification Performs in process inspection Final inspection prior to shipping to end customer Documents inspection results Collaborate with production team on quality related issues Competency requirements: Proficient in the use of measuring tools MS Office products Experience Ability to read, write, and converse in English Desired (can train as needed): 3-5 years experience in inspection role 2+ years related experience within sheet metal manufacturing environment or 5+ years related experience within a manufacturing environment, or equivalent combination of education and experience. Experience with and working knowledge of ISO, AS standards and specifications. Knowledge of basic statistical process control Experience with ERP systems is a plus PHYSICAL REQUIREMENTS Must be able to lift forty pounds without assistance on occasions Must be able to sit, stand and move around continuously Company Overview: Buyken is a precision metal fabrication company that has been around since 1939. We have a dedicated team of experienced people with the common goal of creating the highest quality manufacturing solutions to meet our customers growing and changing needs. We stand by a few mantras: Do what is right for our customers, employees and community. Benefits offered (one of the best in the industry): 100% of medical, dental, vision and life expenses are covered (how many companies can say that?) Buyken pays part of your yearly max deductible as well, which is unheard of 401k retirement benefits with company match on top of: Safe-harbor investment (we put money into your retirement even if you don't!) Tuition reimbursement program and extensive training programs/opportunities/certifications No-limit profit sharing. When the company does well all benefit with no cap. Yearly awards, BBQs and other activities to foster team morale Attitude: You can't train for attitude, drive and self-motivation. Most everything is trainable if you have a good base to work from. You must hold yourself to a high standard of quality and accountability like the rest of the team.

Provides inspection support for all activities within the Systima Electrical Shop. Inspects to the requirements of Systima's engineering documentation, and IPC-610/620 where applicable. Ensures that traceability and documentation is commensurate with job requirements. Reviews planning submitted to Electrical Shop. Also supports Quality related workflows through the Electrical Shop as required by Systima's Quality Management System and AS9100. Reports to the Quality Manager. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS * Medical, Dental, Vision * Company Paid Life Insurance * 401(k) Retirement Savings Plan * Paid Time Off (PTO) * Paid Holidays * Tuition Reimbursement* WHAT YOU WILL DO * Inspects hardware from Systima Electrical Shop to ensure quality, drawing, and specification requirements are met * Ensures that materials are stored, handled, and tracked appropriately per requirements * Ensures manufacturing and inspection documentation is created and recorded appropriately * Ensures that non-conformances are documented appropriately * Generates AS9102 First Article Inspection Reports where required * Supports quality and regulatory audits of the Electrical Shop * Initiates and supports Corrective Actions and investigations where applicable * Works with Design, Manufacturing, and Quality Engineers for new product and process definition WHAT WE ARE LOOKING FOR * Required Education: HS Diploma * Preferred Education: AA in related field * Inspection experience in soldering and/or wire harness manufacturing * Working experience in an AS9100 or ISO9001 compliant manufacturing environment * Previous certification in IPC-610/620 or J-STD desirable * Must be a U.S. Citizen * Must hold or be able to obtain a DoD SECRET clearance EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis ("protected class") including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job DescriptionDescription: Join us in the exciting role of providing a Construction Quality Control Inspector to provide technical services for the Tahoma National Cemetery at Kent, WA. This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. The project provides 27,000 gravesites, supporting infrastructure, and a new honor guard building, satellite public restroom, minor repairs, and access roads, parking, and signage. Work Period: This position is a full-time position for two years, plus two optional 3-month extensions. Essential Functions: Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE. Submittals, RFIs & approvals: Review contractor submittals, RFIs, samples, test/inspection reports, and installed work for technical compliance; recommend approval/disapproval and provide written feedback to the SRE. Schedule, progress & delays: Monitor schedules and daily activities; identify progress delays or slippage and recommend corrective actions to maintain the progress schedule. Contract changes & payments: Assist with change documentation (estimates, cost reviews, negotiations, change order packages) and review contractor payment requests, cost breakdowns, and quotations for SRE recommendation. Reporting & recordkeeping: Prepare and submit daily/weekly reports (work, manpower, safety), maintain complete job files, marked up plans/as builts, deficiency logs, photos, and records to support inspections, disputes, and government review. Safety & compliance: Perform weekly safety inspections, document environmental/EPA conditions, and report safety/compliance issues to the SRE. Materials, testing & commissioning: Maintain inventory of materials, supplies, and equipment; review material samples and cost loadings; coordinate special testing, commissioning, and utility inspections. Meetings & coordination: Attend/lead project and coordination meetings to resolve issues, manage phasing/traffic interruptions, and liaise with utilities, contractors, and VA representatives. Closeout & availability: Assist with final inspections, contract close-out activities, and be available for after-hours or weekend work as required; must communicate fluently in English. Benefits Package: Paid Time Off Paid Federal Observed Holidays Medical Insurance Dental and Vision Insurance Employee Paid Supplemental Insurance (Short Term Disability, Long Term Disability, Life, Accident, and Critical Illness) 401K - employer matching of up to 5% Equal Employment Opportunity (EEO): It has been and will continue to be a fundamental policy that GoldenWolf, LLC., is an Equal Opportunity Employer, including veterans and individuals with disabilities, committed to maintaining world-class facilities through technical excellence and innovation. About the Company: GoldenWolf is a Service-Disabled Veteran-Owned, Women-Owned Small Business that provides comprehensive facility management and support services to federal agencies. The company specializes in delivering a wide range of professional services, including facilities condition assessments, quality assurance, construction management, strategic planning, and technical support across civilian and defense sectors. We invite you to visit the GoldenWolf website at ****************** to learn more about the organization and explore other career opportunities. Requirements: Education: Bachelor's degree in construction management, engineering, or Architecture from an accredited University. Qualifications: Minimum 2 years of experience working with a construction management team. Experience with observing and inspecting construction is required. Current OSHA 30 certification Certified Construction Manager (CCM) will receive greater consideration. Experience with Kahua, Primavera, and other construction management systems. Able to pass a security background check. Proficiency in Microsoft Office. Excellent verbal and written communication skills are necessary to effectively communicate with project stakeholders, contractors, and government personnel. The ability to write clear and concise reports is essential.