Quality inspector jobs in Wilmington, DE - 107 jobs

Job Purpose Nondestructive Testing (NDT) Level III Radiographer (RT) is tasked with the day-to-day operations of the NDT department and supervision of NDT inspectors. Provide real time x-ray service and support to the assigned projects and programs to ensure product meets customer quality requirements. Essential Duties and Responsibilities: Radiographer (RT) Level III Real Time x-ray certification Knowledge of real time x-ray equipment and imaging software, radiographer interpretations Maintain all X-Ray related Equipment / Systems Perform Real-time X-Rays on products and components per existing Procedures and Operating Instructions for internal and external customers Train, qualify and certify NDT RT inspection personnel Write NDT Procedures Develop NDT X-ray inspection techniques Support manufacturing operation level procedures, inspection techniques Support NDT investigations, perform inspections and participate in supplier audit if required Ensure compliance with customer and certification agency regulations Provide NDT RT certification and data for completed X-ray inspections Maintain safe work environment with X-ray monitor equipment, maintain x-ray report and digital logs for Florida Department of Health audits Other duties as assigned Travel 30-40% Qualifications : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or equivalent; Associates Degree preferred Five (5) years of work experience as NDT RT Level II in aerospace inspections Certified ASNT NDT Level III Familiar with quality system requirements (ASME Section III, ANSI, NQA-1, AS9100, ISO9001, etc.) Ability to read, interpret, and apply engineering drawings and specifications Competent computer skills, including MS Office, specifically Word and Excel Ability to read, write, and understand English Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years or college in technical or engineering related discipline from a university, college, or technical school. Preferred:1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Required Licenses or Certifications: Valid Driver's License Previous Level III Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Job Title: Quality Technician Location: Newark, DE 19713 Duration: 6 months Shift: 12 hour shifts (3 days on, 3 days off; 4 days on, 4 days off) Perform various properties testing of composite materials and generate reports used for batch acceptance Qualifications Must have previous technical testing experience in a lab. Must have experience with state of the art technical test technology. Experience with tensile testing and quality dimensions. Additional Information If you are interested and want to apply, Please contact: Himanshu Prajapat ************ **********************************

Full-time Description Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: · Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. · Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. · Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. · Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. · Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. · Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. · Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. · Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. · Determines acceptability or rework by conducting inspections and physical tests of reworked product. · Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. · Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. · Contributes to team effort by accomplishing related results as needed. · Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator · Performs other duties as assigned · Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $40,000 - $55,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. Salary Description $40,000 - $55,000

About the Role: The Lead Quality Inspector plays a critical role in ensuring that CNC machined parts and precision components meet strict aerospace and manufacturing quality standards. This position focuses on inspection and compliance within an AS9100 environment, utilizing advanced quality control methods, precision measurement tools, and Geometric Dimensioning and Tolerancing (GD&T). The ideal candidate brings hands-on experience with CNC machining processes, quality assurance, and continuous improvement in a high-precision manufacturing setting. Responsibilities: Perform detailed inspections of CNC machined parts to verify conformance with engineering drawings, GD&T requirements, and customer specifications. Utilize precision measurement tools such as calipers, micrometers, bore gauges, and height gauges to validate tolerances. Maintain accurate inspection reports, documentation, and non-conformance records in compliance with AS9100 standards. Collaborate with engineering and production teams to resolve quality issues and implement corrective actions. Lead inspection activities, prioritize workloads, and ensure adherence to inspection schedules. Support process improvements by identifying recurring quality issues and contributing to root cause analysis. Provide guidance and mentorship to junior inspectors to uphold quality best practices. Qualifications: Proven experience as a quality inspector in a CNC machining or precision manufacturing environment. Strong knowledge of Geometric Dimensioning and Tolerancing (GD&T) and ability to interpret complex technical drawings. Hands-on experience working within AS9100 quality management systems in aerospace, defense, or high-precision industries. Proficiency in precision measurement tools and inspection equipment. Ability to document inspections, analyze results, and maintain compliance with quality procedures. Strong problem-solving skills with the ability to work independently and manage competing priorities. Desired Qualifications: Certification or formal training in quality inspection, quality auditing, or quality engineering. Experience with statistical process control (SPC) techniques and data-driven quality analysis. Familiarity with first article inspection (FAI) per AS9102 requirements. Strong organizational skills and keen attention to detail in a fast-paced environment. Excellent written and verbal communication skills for cross-functional collaboration. Package Details 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

About the Role: TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. About TAI: TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. Here's a glimpse into your day to day: * Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. * Ensure project deliverables meet TAI and client expectations * Manage all phases of a project - setup, execution, and closeout * Develop and maintain project schedules and budgets. * Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. * Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. * Perform overall project quality control. * Visit field to scope out projects. * Support proposal development by assisting with scope development, cost estimating and execution plan coordination. * Experience and knowledge of Magnetic Flux Leakage Technology (MFL). * Experience and knowledge of floating roofs and seal inspections. * Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Conduct daily safety risk assessments on routine and non-routine job tasks. * Scheduling activities related to inspection. * Prepare isometric drawings and field sketches of piping for pipe inspections * Review and interpret P&ID's * Writes detailed inspection reports and maintains documentation of inspection activities. * Identifies circumstances that necessitate the use of proper safety procedures and equipment. * Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. You'll be a perfect fit if you have: * High School Diploma, some college coursework preferred. * API 653 Certification. * Have a minimum of 10 years' experience working as an API Inspector within related industry * At least 5 years' experience managing large Above Ground Tank Inspection projects. * Prior experience supervising a project team * Self-motivated individual with the ability to work independently and oversee large projects. * Experienced with using Magnetic Flux Leakage Technology (MFL) * Demonstrated ability to perform complete inspection reports for equipment or piping. * Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. * Documentation: Clarity, comprehensiveness, and professional presentation of reports. * High reach operation ability. * Demonstrated leadership, interpersonal and communication skills. * Travel: Will travel up to 50% out of town. Physical Requirements: * Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. * Must be able to remain in a stationary position as necessary to complete assigned tasks. * The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. * Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. * Must be able to ascend and descend a large quantity of stairways at any given time. * Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. * Occasionally lift and move equipment in excess of 100lbs in a safe manner. * Must be able to work in outdoor weather conditions as needed. Compensation and Benefits: * Pay: $55-65/hour (based upon experience) * Annual Profit Sharing Bonus (variable) * PTO and Paid Holidays * Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! * 401(k)with employer match Other Offerings: * The opportunity to make a real impact on a variety of industry-leading projects. * The ability to balance your work and family activities. * Flexible work schedule * Work in a dynamic and collaborative environment that values creativity and innovation. * A chance to learn and grow alongside some of the brightest minds in engineering. * Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at ***********************

**About the Role:** TAI is looking for a seasoned API 653 Inspector to lead and manage large above-ground tank inspection projects. The ideal candidate will have at least 10 years of experience, with a proven track record of supervising teams, overseeing all project phases from start to finish, and serving as a key point of contact for major clients in the chemical and power generation industries. If you are a self-motivated leader with a knack for problem-solving and a desire to make a significant impact, we offer a challenging role with the opportunity to take ownership of high-profile projects. Join our team and play a critical part in ensuring the safety and integrity of essential infrastructure. **About TAI:** TAI has been a leading multidisciplinary firm for over 35 years, providing expert engineering, management, and technical services to industrial, manufacturing, commercial, and mission critical markets. With over 300 skilled professionals, 16 different divisions, and 6 offices across the US, TAI offers sole-source solutions for complex projects, built on long-term client partnerships and a culture that attracts top talent. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Provide project management support on Large Above ground Tank Inspection projects, and as needed for other inspection projects. + Ensure project deliverables meet TAI and client expectations + Manage all phases of a project - setup, execution, and closeout + Develop and maintain project schedules and budgets. + Provide a single point of contact between TAI and client - getting info from client to carry out successful inspection project, providing the client with necessary information and resolving most project issues with the client. + Prepare initial budget, tracking overall costs, approving pending invoices, and pursuing change orders as required. + Perform overall project quality control. + Visit field to scope out projects. + Support proposal development by assisting with scope development, cost estimating and execution plan coordination. + Experience and knowledge of Magnetic Flux Leakage Technology (MFL). + Experience and knowledge of floating roofs and seal inspections. + Meet with clients to provide recommendations on the repair/ replacement/alteration of plant equipment as required for safe operation. + Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. + Conduct daily safety risk assessments on routine and non-routine job tasks. + Scheduling activities related to inspection. + Prepare isometric drawings and field sketches of piping for pipe inspections + Review and interpret P&ID's + Writes detailed inspection reports and maintains documentation of inspection activities. + Identifies circumstances that necessitate the use of proper safety procedures and equipment. + Communicate with clients and other parties in such a manner as to benefit the professional reputation of the company. **You'll be a perfect fit if you have:** + High School Diploma, some college coursework preferred. + API 653 Certification. + Have a minimum of 10 years' experience working as an API Inspector within related industry + At least 5 years' experience managing large Above Ground Tank Inspection projects. + Prior experience supervising a project team + Self-motivated individual with the ability to work independently and oversee large projects. + Experienced with using Magnetic Flux Leakage Technology (MFL) + Demonstrated ability to perform complete inspection reports for equipment or piping. + Inspection: Know the significance of what is observed and recognize the potential significance of what cannot be observed. Critical-minded and curiosity as to conditions and findings. + Documentation: Clarity, comprehensiveness, and professional presentation of reports. + High reach operation ability. + Demonstrated leadership, interpersonal and communication skills. + Travel: Will travel up to 50% out of town. _Physical Requirements:_ + Capacity to perform physically demanding work: Climbing, pipe rack walking, tight-spot body positioning/maneuvering. + Must be able to remain in a stationary position as necessary to complete assigned tasks. + The person in this position needs to frequently move about client's facilities and offices to access equipment and complete tasks. + Consistently ascend and descend portable and fixed ladders, scaffolding and other equipment used to reach equipment at various levels of height some of which maybe in excess of 25 feet in a safe manner. + Must be able to ascend and descend a large quantity of stairways at any given time. + Frequently move tools and equipment weighing up to 50lbs across client facilities as needed to complete tasks. + Occasionally lift and move equipment in excess of 100lbs in a safe manner. + Must be able to work in outdoor weather conditions as needed. **Compensation and Benefits:** + Pay: $55-65/hour (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Launch Your Career with ConGlobal ConGlobal is hiring immediately for a key role in our global supply chain operations. Whether you're looking to grow your career or gain new skills, this role offers paid training, competitive pay, excellent benefits, and long-term advancement opportunities. 📍 Location: 329 Bethel Avenue Aston, Pennsylvania 19014 United States 💲 Starting Pay: $21.63/hour 🕐 Status: Full-Time | Immediate Hire 🕔 Schedule: Open availability required, including all shifts, weekends, and holidays. Responsibilities We are seeking a detail-oriented and reliable Quality Inspector to join our team. In this role, you will be responsible for inspecting damaged vehicles, performing railcar inspections, and supporting the safety and quality assurance processes across our operations. This position requires strong attention to detail, solid computer skills, and a commitment to safety and quality standards. Key Responsibilities: Inspect damaged vehicles located in the service bay and accurately document findings. Enter vehicle damage reports into computer systems. Conduct on-rail inspections of vehicles and related equipment. Measure and assess railcar junctions for compliance and safety. Maintain and update the railcar junction database regularly. Perform safety audits on unloading personnel to ensure adherence to company and regulatory standards. Assist in developing and implementing quality management procedures. Qualifications Strong customer service and communication skills. Computer literacy, including basic data entry and report generation. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). High attention to detail and accuracy in inspections and documentation. Ability to follow detailed instructions and safety protocols. Capable of working independently and as part of a team. Experience in a quality assurance or inspection-related role is preferred. Preferred Qualifications: Prior experience in automotive or rail industries a plus. Familiarity with safety audit practices and regulatory standards. Ability to adapt to evolving procedures and contribute to process improvements.

The Quality Technician in microbiology aseptic processes ensures products meet microbiological standards and are manufactured in a sterile environment. This role monitors quality assurance standards and encourages the team to consistently deliver excellent results. The Quality Technician is responsible for executing best practices, goals, and established standards for the team. Primary Responsibilities * Perform tests to identify harmful microorganisms, maintain a sterile environment, and ensure regulatory compliance * Document and analyze test results following good laboratory practices for microbiology and quality control laboratories * Identify and address production issues, contributing to corrective action * Inspect work daily, maintain cleanliness, organize supplies, and assemble sterile products using aseptic technique * Handle biohazard spills, train new hires, and demonstrate the use of cleaning chemicals * Uphold quality standards, follow GFSI, HACCP, and GMP guidelines, and participate in food safety inspections * Support sanitation operations, monitor performance, and provide report * Address customer complaints, conduct audits, and contribute to quality assurance improvements * Promote continual improvement and collaborate on cross-functional projects * Perform routine environmental monitoring within cleanrooms and production areas to detect microbial contamination * Conduct microbiological assays on raw materials, in-process samples, and finished products using various techniques * Accurately record and interpret test results, maintaining detailed documentation of activities, including deviations, investigations, and corrective actions * Participate in investigations for out-of-specification (OOS) results, deviations, and complaints related to microbiology testing * Ensure proper calibration and maintenance of laboratory equipment used for microbiological analysis and QC testing Prior Knowledge/Experience * Bachelor's Degree in Microbiology, Biology, or related field * 1-3 years of experience in quality; food processing experience preferred * Strong understanding of aseptic techniques and microbiology principles * Experience with various microbiological testing methods, including plate counting, membrane filtration, and rapid microbial detection * Proficiency in data analysis, documentation, and recordkeeping * Excellent attention to detail; ability to work independently and in team environments * Familiarity with GMP regulations and quality systems * Ability to utilize provided PPE - safety glasses, ear plugs/muffs, bump caps, dust masks, company uniform, safety shoes * Ability to be respirator certified if required * Physical ability to sit, stand, walk, climb, stoop for up to 8 hours; lift 55 lbs consistently; lift/hold objects overhead for extended periods * Ability to climb and work on a 40-foot extension ladder for extended periods as needed; work at heights up to 50 feet * Ability to maneuver and work in confined areas with variations in temperature, humidity, and air quality The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

MAJOR JOB DUTIES AND RESPONSIBILITIES (List in order of importance) Complies with company policies, procedures, work instructions and training requirements. Positively Influences peers and other line-level personnel to comply and adhere to applicable requirements. Carries out responsibilities in compliance with the Quality Manual and applicable regulations (cGMP, MDD and GDPMDS). Performs attribute inspection activities to determine acceptability of kit, components, and/or shipped packages; documents the results. Sends kit back to production team or manually corrects kit when errors are discovered; documents and tracks any errors. Performs batch record review for conformance to Good Documentation Practices. Performs assembly lot review and forwards documentation to Supervisor/Manager. Physically demarcates, stages, packs and/or palletizes accepted kits/shipped orders. Assists in the maintenance of an organized production environment, free of distractions and debris. Performs other duties as assigned.

ABOUT THE GROUP From a small store in Turin to a large, internationally recognized group: we are present in 90 countries around the world, with over 5,000 employees and 30 companies, managed directly and indirectly by the Luigi Lavazza Spa parent company, which distribute and market our products and coffee machines. In addition to Lavazza, the following brands are also part of our Group: Carte Noire, Merrild, Kicking Horse, Eraclea and Whittington tea. Joining Lavazza means doing business with passion, knowing that the impact of our work goes beyond the quality of the production chain. We are a big family and are constantly looking for new talents who share our values and can enrich our team. We combine competitiveness with social and environmental responsibility as we create superior quality products available for consumption both at home and out of home, and distributed through all channels: Retail, Foodservice, Office Coffee Service (OCS), and Vending. Our strong, diversified presence enables us to offer consumers and clients perfectly suited solutions, for any occasion and time of day. #LI-JB1 JOB OVERVIEW Lavazza North America, makers of Lavazza Roast & Ground Coffee along with FLAVIA , is leading the coffee revolution. The world's leading Brew-by-Pack refreshment system, the Flavia Brewing System (FBS) created Brew-by-Pack technology in 1983, and the company was the first to pioneer Filter pack packaging to retain freshness, eliminate residual flavour, provide perfect-portion size, and protect contents from sunlight, oxygen, and other harmful elements. Today, Lavazza North America continues that tradition and has added retail whole beans and ground coffee to its portfolio. The purpose of the Operations Quality Inspector role is to ensure that food safety and quality are verified in every step of our process to ensure consumer satisfaction. The Operations Quality Inspector will perform incoming material inspections, along with product inspection of roasting, grinding, and packaging operations. Aid in the resolution of quality matters by liaising with Supply, R&D and Supplier Quality Assurance and manage continuous improvement opportunities through corrective actions. Location: West Chester, PA JOB RESPONSIBILITIES General support to the Operations Quality Manager regarding Lavazza North America's West Chester, PA plant quality systems and procedures. Test our products on the Roasting, Grinding, and all Packaging lines. Conduct food safety inspections and reviews. Control of Non-Conforming product, verify HOLDS, review records, and assist with investigations. Manage the storage of production samples. Assist with customer complaint investigations on the production floor. Maintain incoming material inspections, supplier Non-Conformance creation, HOLDs, and incoming material test equipment. Review production data entry into SAP and QDA for accuracy and completeness. Environmental Swabs, Nitrogen & Compressed Air testing program. Handle sample preparation and shipments to external laboratories. Partner with Supply, Supplier Quality, Quality Lab and Maintenance to ensure on-time and reliable leadership and support is provided. Performs other related duties and assignments as required. Ability to work weekends as needed. Ability to work extended shifts as needed. PROFESIONAL QUALIFICATIONS High School Degree or GED essential; 2 yr. Technical Degree preferred 0 to 3 years of related or equivalent experience, preferred Demonstrated ability to embrace the culture of Lavazza Group Strong interpersonal and communication skills are required to effectively communicate with other business units at a variety of functional levels Demonstrates strong communication capabilities, both verbally and written, using appropriate Microsoft Office tools, i.e. Word, Excel, PowerPoint, as well as other Lavazza ancillary software Strong, flexible team player that works to meet both personal and organization goals Very high of attention to detail, with ability to multi-task Desire to learn about the inner workings of Quality and Food Safety in the Manufacturing environment BENEFITS/PERKS Competitive Medical, Vision, Dental Benefits 401K Package Employee Assistance Program Onsite Cafeteria and Gym (West Chester location) Ability to be barista certified Monthly Lunches provided by Lavazza Tuition Reimbursement Performance Development Plans Employee Discounts Flexible business casual dress code - jean friendly! Free coffee, anytime! Lavazza is an equal opportunity employer that is committed to diversity and inclusion in the workplace. Lavazza prohibits discrimination and harassment of any type and affords equal employment opportunities without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Innovative Solutions Support (IS&S), located in Exton, PA is a diversified international avionics supplier to civil, military, business, and commercial markets. The scope of the IS&S Quality Management System is the design, development, production and repair of Integrated Cockpit Display and Navigation Systems, Air Data Systems, Fuel Quantity Measurement Systems, Multifunction Engine and Hydraulic Displays, and Autothrottles. IS&S offers excellent career opportunities for those who thrive on cutting-edge product design and high output production and have the drive to contribute directly to the success of the company. IS&S has opportunities for Quality Inspectors on the first and second shift. Responsibilities: Perform inspection of all incoming material; perform in-process and final inspections, as required; maintain calibration pool of test equipment and tools. Work with Quality Assurance Management to plan and prioritize projects that are in accordance with the objectives and strategic plans of the company. Follow established department and laboratory procedures to accomplish tasks using proven methods. Where opportunities exist, suggest improvements to departmental procedures to achieve company objectives with improved efficiency. When appropriate, coordinate supply base and third parties to sort, rework or otherwise remedy components, assuring compliance to requirements and ongoing production. Perform inspections of electrical components including resistors, capacitors, diodes, and integrated circuits. Perform mechanical inspection using micrometers, calipers, indicators, height gages, optical comparators, coordinate measuring machines and various other inspections tools. Perform in-process inspections of printed wiring assemblies to IPC-A-610 standards and harnesses to IPC-A-620 standards. Perform other inspections including glass, paint, chemicals, STC installation kits, and printed wiring boards. Perform final inspection of products data packs, ID plates and revision levels. Perform calibration of mechanical and electrical tools both internally and externally. Coordinate monthly tool recall. Must be able to input data into spreadsheets and databases. Develop and maintain a working climate which increase personal satisfaction and enhance productivity and quality of work through the achievement of departmental and IS&S objectives. Foster effective working relationships with Quality, Purchasing, Engineering and other personnel at all IS&S locations. Tap into company expertise to assist with problem solving and product knowledge. Requirements • High School education or equivalent • Must be able to read and interpret mechanical drawings, specifications, and work instructions • Must be familiar with mil-spec/industry equivalent workmanship requirements • Must have excellent communication skills in English coupled with strong interpersonal skills. • Minimum of 5 years' experience in a manufacturing work environment; electronic packaging environment is preferred. • Working knowledge in computer sciences to operate in a Windows environment. • Working knowledge of various quality control systems such as ISO9001 / AS9100, 14 CFR Part 21, SPC, TQM, etc. • Working knowledge of J-STD-001 and IPC A-610 Innovative Solutions & Support (IS&S) is an Equal Employment Opportunity and VEVRAA Employer. IS&S is committed to Equal Employment Opportunity and prohibits discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination against all individuals based on their race, color, religion, sex, or national origin. Moreover, IS&S is committed to Companywide affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex national origin, protected veteran status or disability.

The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life for our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. As with all s at R-V, this job is considered safety-sensitive. GENERAL JOB DESCRIPTION We are seeking an experienced Quality Inspector to join our team at our Honey Brook and Morgantown, PA locations. This position is responsible for providing day-to-day quality engineering support within our General Fabrication, ASME Section VIII, and NQA-1 markets. This position will play an integral role in the growth and improvement of the RVII organization through elevating first pass quality, increased project throughput, on-time delivery, and project expectations. DUTIES/RESPONSIBILITES Provide technical support to RVII manufacturing facilities Supports gathering and presenting key KPI measurements to the organization Participate in pre-job contract review. Develop and implement inspection and test plans for manufactured and purchased components Interface with vendors to ensure timely resolution of Quality non-conformances Conduct internal quality system process audits Coordinate and host outside inspection agencies and customer inspectors Prepare, revise, and implant Quality System procedures, policies, and work instructions Conceptualize and analyze designs to ensure technical outcomes are consistent with customer and company specifications Perform non-destructive and dimensional inspections in accordance with approved procedures, customer specifications, and governing codes. Maintain control and maintain an inventory of non-conforming products. Review contracts to determine deliverables and ensure compliance with specifications Plan, schedule, and coordinate NDE Inspection activities daily in conjunction with the manufacturing department. Maintain adherence with all M&TE requirements, testing requirements, and procedures SKILLS/QUALIFICATIONS NDE (Non-Destructive Evaluation) qualifications - minimum of Level II in VT/MT/PT/BLT/UT-T Must possess a valid American Welding Society - Certified Welding Inspector credential Must have advanced knowledge of ASME Y14.5 specification Must have fundamental knowledge of ASME Sections VIII and V Prior experience with ASME NQA-1 and 10CFR50 Appendix B preferred Ability to work independently and direct coworkers Bachelor's degree in engineering or quality related field with 2+ years of experience or 10+ years in Quality Control role Strong verbal and written communication skills Self-motivated with attention to detail and accurate reporting Proficient in MS Office suite products EDUCATIONAL/PHYSICAL REQUIREMENTS Two- or four-year college degree or relevant experience in inspection activities Everyday bending, crouching, stooping, standing, and overhead reaching Everyday exposure to moving machinery, dust, dirt, grease or other disagreeable elements Lifting up to 50-75 lbs. Must be able to pass and complete a physical assessment Must be able to perform the essential functions of the job with or without accommodation R-V Industries, Inc. is an equal opportunity employer. R-V Industries, Inc. is an equal opportunity employer. Monday-Thursday 6:00 am - 4:00 pm

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking a dedicated Quality Control Inspector to join our fast-paced, dedicated, and extremely talented team. Candidates should bring in a high level of excitement and punctuality. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday Responsibilities: Inspect - Conduct routine and non-routine inspection of materials at incoming, in-process, and final. First Article Inspection when required by the customer or quality management. Inspect - Perform tests, interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data/material for release. Calibration - Maintain inspection equipment in accordance with Amuneal's internal procedures and any relevant customer specifications. Document - Ensure drawings, work instructions, and procedures are maintained to current revision and accessible. Audit - Perform routine internal audits of processes and persons, as directed by relevant management. Train - Provide training and guidance to junior members of the Quality team. This includes the provision of oversight, and implementation of disciplines when it is necessary, as well as reporting on progress, or lack thereof, to relevant management. Straighten: Arrange items that are needed so that they are ready & easy to use. Clearly identify locations for all items so that anyone can find them & return them once the task is completed. Shine: Clean the workplace & equipment on a regular basis to maintain standards & identify defects. Standardize: Revisit the first three of the 5S on a frequent basis to maintain standards & identify defects. Sustain: Keep the rules to maintain the standard and continue to improve every day. Qualifications: High School Diploma/ GED required. Associates Degree, Bachelors Degree, or Technical school preferred. Knowledge of ISO 9001 Ability to read and understand blueprints Technically apt, with experience using Microsoft Suites. Use of CMM/ FARO Arm Preferred. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

This role is responsible for acting as a testing resource for the lab, supporting the current technicians and provide testing services used to facilitate production and certification of products. This role will also assist in maintaining documentation of test results, procedures and calibration of tools and equipment. Essential Functions: * Provides accurate and timely test results and assist production with in-process testing. * Maintains quality records and procedures. * Performs standard testing in a lab environment when needed * Certifies physical properties to customers and generates certificate of compliance. * Maintains records of calibration and repair and perform calibrations on equipment/tools. * Maintains labs inventory of test consumables. * Reviews compliance of materials to material specifications. * Other duties as assigned. Qualifications: * High School Diploma or equivalent. May consider equivalent experience in lieu of education. * 1+ Year experience in manufacturing environment. * Experience with data analysis and database computer programs. * Experience with quality and other laboratory testing tools.

Salary: Do you want to work for a construction company unlike any other? At JGM, we challenge the industrys status quo. Known as the team that delivers When You Need It Yesterday, weve built a culture around safety, quality, and speed. At JGM, were more than a company-were a family. Working side by side, we support one another, building trust by knowing we can count on each other. Driven by our core values, mission, and purpose, we stay focused on our vision for the future. The result? A team environment that fuels exceptional employee satisfaction, which in turn drives extraordinary client experience and continued company growth. The only question is: Are you ready to join our growing family and be part of something truly special? Be an integral part of the JGM family by living our core values: We Plan. We Adapt. We Succeed. Uncompromising Safety & Quality. Family is Our Foundation. Create Value Through Better Solutions. Whatever it Takes. Commitment to Self-improvement. Our Purpose (FOREVER): Develop Elite Leaders Today, So We Can Build Tomorrows Future Our Vision (ONE DAY): Driven to be the Safest, Fastest, and Most Effective Industrial Construction & Fabrication Partner in North America Our Mission (TODAY): Solve Our Clients Toughest Challenges with Safety and Quality Top of Mind Position Overview JGM is seeking a talented QC Inspector to join our growing team! The perfect candidate is a professional who thrives on tackling challenges in an exciting, fast-paced environment. This position will inspect raw materials, in-process work and finished products for conformance to shop drawings, specifications, and codes by performing the below duties. Responsibilities Conduct complete layout inspections, measuring dimensions (length, height, angles, radii, etc.) using precision instruments (micrometers, calipers, gauges, etc.) to ensure compliance with drawings, specifications, and codes. Verify quality at all stages: incoming materials, in-process work, and final products. Visually inspect parts, welds, bolts, coatings, and assemblies; compare pieces to detect variations; enforce standards and legal requirements. Interpret and apply shop drawings, specifications, ASTM codes, AISC standards, DOT requirements, and welding/bolting/painting codes. Maintain accurate inspection records, defect lists, and calibration of measuring equipment; coordinate with departments to resolve quality issues. Support operator training on measurement, visual acceptability, and processes; assist with internal and external audits. Manage NDE (Non-Destructive Examination) training, testing, certification, and documentation; maintain CWI certification. Review and approve quality-related purchase orders, reports, and testing requirements. Assist in developing procedures, quality summaries, and corrective actions; enforce non-conformance protocols. Serve as liaison with outside inspectors; investigate shop/field errors and support resolutions. Perform other QA-related tasks as required by supervision. Qualifications Strong knowledge of welding symbols and diagrams, and inspection tools. Highly proficient in reading blueprints and other printed instructional material. Basic Math & Geometry/Trigonometry. Familiar with variety of weld processes: Flux Core Arc Welding (FCAW), Sub Arc Welding (SAW), Gas Metal Arc Welding (GMAW), and/or Gas Tungsten Arc Welding (GTAW) Ability to perform and document inspection activities during fabrication and welding of structural piece members. Microsoft Office. CWI preferred. Self-motivated, collaborative team member. Safety focused. Operates equipment and champions safety initiatives. Education High School Degree or GED Equivalent preferred Minimum of seven years related experience and/or training in steel fabrication; or an equivalent combination of higher education and experience in the steel fabrication industry or closely related fields. Physical Requirements The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires prolonged walking, standing, sitting, bending, squatting, stooping, climbing, regular lifting and carrying to move up to 50 lbs., talking, hearing, reaching, feeling, grasping, and push/pulling. Must be able to work in various weather conditions/temperatures. Regular mental and visual attention much or all the time with manual coordination. General office environment conditions. Flexibility required to travel. JGM offers a competitive wage and benefit package: Participate in the companys yearly performance bonus program Medical, Vision & Dental PTO & Holidays 401(k) + Matching Life Insurance Short/Long-Term Disability Employee Assistance Program Generous Referral Program Training and Further Education This job description is subject to change based on the needs of the business and is notall-inclusive. JGM is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Quality Control Inspector I is responsible for inspecting, testing, and auditing raw materials and finished products, as well as releasing finished products. Attention to detail is an expectation. Demonstration of commitment to patient safety and product quality by maintaining compliance with the Quality Policy and all other documented quality processes and procedures. Inspect and release raw materials, components, sub-assemblies, and finished devices according to procedure. Drives continuous improvement activities with cross-functional team members. Generate non-conformances and escalate to the Material Review Board in a timely manner. Interacts with production areas, manufacturing and design engineering, marketing, quality, and management. Job Duties: Promotes a work environment of continuous improvement that supports CQ Medical's Quality Policy, Quality System, and the appropriate regulations. Assists with communicating business-related issues or opportunities for improvement to management. Accountable for compliance with applicable US and International regulations and directives including, but not limited to, Food & Drug Administration (FDA), Canadian and European Union regulations. Works in a team environment to achieve metrics. Interprets engineering drawings, schematic diagrams, sampling tables, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, mechanical, or chemical characteristics. Records test data, applying statistical quality control procedures using GMP documentation practices. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Quarantines all incoming material until testing is accepted. Quarantines all non-conforming material during any step of the manufacturing process until the Material Review Board dispositions the material. Purging of records as required. Maintains a neat and organized work area. Remains current on all required training. Conducts calibrations and works with 3 rd party calibration providers to ensure inspection equipment meets specifications. Conducts transactions in the Quality Management System and/or ERP system to detail the disposition of incoming and in-process materials. Working Conditions: 50 lbs. of lifting required for this role Hearing protection, safety glasses, safety shoes, and gloves are required for this role Required exposure to biohazard Job Qualifications: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of auditors or employees of our organization. Ability to interact effectively with individuals and teams. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and interpret bar graphs. Decision-making ability. Ability to use testing equipment. Must be able to manage multiple tasks and perform with accuracy and a high attention to detail. Ability to identify priorities and function independently required. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Identify various discrepancies (product, process, documentation, etc.) Analytical and problem-solving skills. Computer proficiency, including data entry. MS Office Suite (Word, PowerPoint, and Excel) experience required. Education and/or Experience High school diploma or general education degree (GED). Medical device or manufacturing experience a plus. Preferred demonstration of leadership. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Quality Control Inspector I is responsible for inspecting, testing, and auditing raw materials and finished products, as well as releasing finished products. Attention to detail is an expectation. Demonstration of commitment to patient safety and product quality by maintaining compliance with the Quality Policy and all other documented quality processes and procedures. Inspect and release raw materials, components, sub-assemblies, and finished devices according to procedure. Drives continuous improvement activities with cross-functional team members. Generate non-conformances and escalate to the Material Review Board in a timely manner. Interacts with production areas, manufacturing and design engineering, marketing, quality, and management. Job Duties: Promotes a work environment of continuous improvement that supports CQ Medical's Quality Policy, Quality System, and the appropriate regulations. Assists with communicating business-related issues or opportunities for improvement to management. Accountable for compliance with applicable US and International regulations and directives including, but not limited to, Food & Drug Administration (FDA), Canadian and European Union regulations. Works in a team environment to achieve metrics. Interprets engineering drawings, schematic diagrams, sampling tables, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, mechanical, or chemical characteristics. Records test data, applying statistical quality control procedures using GMP documentation practices. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Quarantines all incoming material until testing is accepted. Quarantines all non-conforming material during any step of the manufacturing process until the Material Review Board dispositions the material. Purging of records as required. Maintains a neat and organized work area. Remains current on all required training. Conducts calibrations and works with 3 rd party calibration providers to ensure inspection equipment meets specifications. Conducts transactions in the Quality Management System and/or ERP system to detail the disposition of incoming and in-process materials. Working Conditions: 50 lbs. of lifting required for this role Hearing protection, safety glasses, safety shoes, and gloves are required for this role Required exposure to biohazard Job Qualifications: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of auditors or employees of our organization. Ability to interact effectively with individuals and teams. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and interpret bar graphs. Decision-making ability. Ability to use testing equipment. Must be able to manage multiple tasks and perform with accuracy and a high attention to detail. Ability to identify priorities and function independently required. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Identify various discrepancies (product, process, documentation, etc.) Analytical and problem-solving skills. Computer proficiency, including data entry. MS Office Suite (Word, PowerPoint, and Excel) experience required. Education and/or Experience High school diploma or general education degree (GED). Medical device or manufacturing experience a plus. Preferred demonstration of leadership.

Job DescriptionOverview Join our team as a Quality Inspector at our facility in Linwood, PA! In this role, you'll play a crucial part in ensuring that our products meet the highest standards of quality and safety. We're looking for detail-oriented individuals who are passionate about maintaining excellence and can thrive in a collaborative environment. If you have a keen eye for detail and a commitment to quality, we'd love to hear from you! Responsibilities Conduct thorough inspections of incoming materials, in-process components, and finished products. Utilize measuring instruments and testing equipment to assess product quality. Document inspection results and maintain accurate records of findings. Identify and report defects or non-conformities and recommend corrective actions. Collaborate with production teams to resolve quality issues and improve processes. Participate in quality audits and assist in the development of quality control procedures. Stay updated on industry standards and best practices to ensure compliance. Qualifications High school diploma or equivalent; additional technical training in quality control is a plus. Proven experience as a Quality Inspector or in a similar role. Strong understanding of quality control standards and testing methodologies. Proficient in using measurement tools and equipment. Excellent attention to detail and analytical skills. Ability to work independently and as part of a team. Strong communication skills, both written and verbal. You should be proficient in: Quality Inspection Experience Tape Measure Reading Blueprint Reading Machines & technologies you'll use: Measurement Gauges Calipers and Micrometers