Research and development engineer jobs in East Pennsboro, PA - 242 jobs

Meta is seeking a Research Engineer to join our Large Language Model (LLM) Research team. We conduct focused research and engineering to build state-of-the-art LLMs, which we often open-source, like our team's recent Llama 2. We are looking for strong engineers who have a background in generative AI and NLP, with experience in areas like language model evaluation; data processing for pre-training and fine-tuning; responsible LLMs; LLM alignment; reinforcement learning for language model tuning; efficient training and inference; and/or multilingual and multimodal modeling. **Required Skills:** Research Engineer, Language - Generative AI Responsibilities: 1. Design methods, tools, and infrastructure to push forward the state of the art in large language models 2. Define research goals informed by practical engineering concerns 3. Contribute to experiments, including designing experimental details, writing reusable code, running evaluations, and organizing results 4. Adapt standard machine learning methods to best exploit modern parallel environments (e.g. distributed clusters, multicore SMP, and GPU) 5. Work with a large and globally distributed team 6. Contribute to publications and open-sourcing efforts **Minimum Qualifications:** Minimum Qualifications: 7. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience 8. Research experience in machine learning, deep learning, and/or natural language processing 9. Experience with developing machine learning models at scale from inception to business impact 10. Programming experience in Python and hands-on experience with frameworks such as PyTorch 11. Exposure to architectural patterns of large scale software applications **Preferred Qualifications:** Preferred Qualifications: 12. A PhD in AI, computer science, data science, or related technical fields. 13. Master's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. 14. First author publications at peer-reviewed AI conferences (e.g., NeurIPS, CVPR, ICML, ICLR, ICCV, and ACL). 15. Direct experience in generative AI and LLM research. **Public Compensation:** $88.46/hour to $257,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * 3-D CAD modeling (Solidworks) * CFD/FEA analysis * 2-D Drawing creation * Fabrication procedure and work instruction development * Working cohesively with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication/interaction Requirements Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. * B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. * Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) * Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! * Good verbal and written skills. * Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

**Company Statement** Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. **Overview** Graham Packaging is looking for a Product Development Engineer with strong engineering and problem solving skills. This individual serves as the technical liaison between Graham Packaging and the customer, the sales force, the plants, and the broader technical organization. The Product Development Engineer is responsible for all aspects of multi-phased plastic bottle development projects from inception, through planning, design, prototyping, and commercial launch for both Graham Packaging and our customer. **Responsibilities** + Translate the voice of the customer and their needs into a bottle design and product specification for complex packaging needs + Coordinate industrial and engineering design activities to develop a fit for use package design. + Conduct unit/prototype mold construction and sampling to develop a robust blow molding process and utilize data analysis to develop a process that transfers effectively to manufacturing. + Develop a production specification that addresses the key product performance characteristics. + Support capital engineering by providing product requirements to assist in the specification of manufacturing equipment. + Provide instruction to tooling engineers for the construction of production molds and tooling. + Conduct manufacturing start-up activities and deliver efficient manufacturing processes to our plants. + Conduct customer package validations; obtain required approvals from our customers. + Support Graham Packaging manufacturing facilities in advanced problem solving and continuous improvement activities providing direction on procedures, equipment, processes, tooling and product testing. + Provide and manage, in a document repository, all project documentation including timelines, data summaries, approvals and customer correspondence. + Maintain historical knowledge of development, technology and process best practices and act as subject matter expert in these areas. + Research and remain current on packaging trends, packaging technologies, closures and sustainability trends. + Travel of up to 50% required at times. **Qualifications** + Excellent verbal and written communication, including the ability to communicate effectively with internal and external customers + Proficient with MS Office applications and MS Project + Strong problem solving skills utilizing experimentation and data driven decision-making + Advanced mold design experience and plastics processing experience strongly desired + Advanced ability to understand and interpret statistics + Advanced knowledge of plastic materials properties and testing procedures + Ability to develop and execute product-testing procedures + Ability to read and interpret blueprints and drawings **Education and/or Work Experience Requirements** + BS degree in Engineering (Plastics Engineering, Mechanical Engineering, Industrial Engineering preferred) + Experience (5-8 years) developing packaging as a supplier, converter or packaging customer. **Compensation Statement** The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. **Benefits Statement** Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. **EEO Disclaimer** Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law. **Location : Physical Work Location Display Name** _York, PA_ **ID** _2025-8737_ **Category** _Engineering_ **Type** _Full-Time_ We believe in equal opportunity for all job candidates, and we do not discriminate on the basis of race, creed, color, ethnicity, national origin, religion, sex, sexual orientation, gender expression, age, physical or mental ability, veteran status, military obligations or marital status. Download these flyers to learn more about our company's policies, including our participation in E-Verify.

Company Statement Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. Overview Graham Packaging is looking for a Product Development Engineer with strong engineering and problem solving skills. This individual serves as the technical liaison between Graham Packaging and the customer, the sales force, the plants, and the broader technical organization. The Product Development Engineer is responsible for all aspects of multi-phased plastic bottle development projects from inception, through planning, design, prototyping, and commercial launch for both Graham Packaging and our customer. Responsibilities Translate the voice of the customer and their needs into a bottle design and product specification for complex packaging needs Coordinate industrial and engineering design activities to develop a fit for use package design. Conduct unit/prototype mold construction and sampling to develop a robust blow molding process and utilize data analysis to develop a process that transfers effectively to manufacturing. Develop a production specification that addresses the key product performance characteristics. Support capital engineering by providing product requirements to assist in the specification of manufacturing equipment. Provide instruction to tooling engineers for the construction of production molds and tooling. Conduct manufacturing start-up activities and deliver efficient manufacturing processes to our plants. Conduct customer package validations; obtain required approvals from our customers. Support Graham Packaging manufacturing facilities in advanced problem solving and continuous improvement activities providing direction on procedures, equipment, processes, tooling and product testing. Provide and manage, in a document repository, all project documentation including timelines, data summaries, approvals and customer correspondence. Maintain historical knowledge of development, technology and process best practices and act as subject matter expert in these areas. Research and remain current on packaging trends, packaging technologies, closures and sustainability trends. Travel of up to 50% required at times. Qualifications Excellent verbal and written communication, including the ability to communicate effectively with internal and external customers Proficient with MS Office applications and MS Project Strong problem solving skills utilizing experimentation and data driven decision-making Advanced mold design experience and plastics processing experience strongly desired Advanced ability to understand and interpret statistics Advanced knowledge of plastic materials properties and testing procedures Ability to develop and execute product-testing procedures Ability to read and interpret blueprints and drawings Education and/or Work Experience Requirements BS degree in Engineering (Plastics Engineering, Mechanical Engineering, Industrial Engineering preferred) Experience (5-8 years) developing packaging as a supplier, converter or packaging customer. Compensation Statement The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. Benefits Statement Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. EEO Disclaimer Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law.

**_What Application Development & Maintenance contributes to Cardinal Health_** Information Technology oversees the effective development, delivery, and operation of computing and information services. This function anticipates, plans, and delivers Information Technology solutions and strategies that enable operations and drive business value. Application Development & Maintenance performs configuration or coding to develop, enhance and sustain the organization's software systems in a cross-functional team environment through adherence to established design control processes and good engineering practices. This job family programs and configures end user applications, systems, databases and websites to achieve the organization's internal needs and externally-facing business needs. Application Development & Maintenance partners with business leaders, investigates user needs and conducts regular assessments, maintenance and enhancements of existing applications. We are seeking a forward-thinking Workday AI Solutions Integration Consultant to lead the implementation, configuration, and optimization of Workday's next-generation AI capabilities-specifically Workday Everywhere, Workday Assistant, and Workday Illuminate. This role combines AI innovation with Workday integration expertise to deliver smart, scalable, and secure workflows that enhance business operations. The specialist will drive user experience transformation, streamline HR workflows, and support enterprise-wide adoption of intelligent automation. **_Responsibilities_** + Lead deployment of AI agents such as Recruiter Agent and Performance Review Agent. + Design, build, and deploy custom AI agents using Workday's low-code/no-code tools and the Workday Build platform. + Configure anomaly detection, auto-filling, and contextual automation features across HR modules. + Create AI-powered applications and widgets using Workday Extend to embed personalized AI assistance directly into user workflows. + Enable and configure Workday Assistant across web and Microsoft Teams environments. + Develop guided workflows for time-off requests, job changes, and employee inquiries. + Monitor usage analytics and optimize conversational flows for accuracy and efficiency. + Oversee integration of Workday Assistant into Microsoft Teams. + Ensure seamless access to approvals, dashboards, and notifications within the flow of work. + Coordinate with IT and HR administrators to manage app permissions and security protocols. + Leverage Expanded AI Gateway APIs to embed Workday's AI services into applications, including document intelligence for classification and data extraction. + Automate and connect processes across Workday and third-party systems using AI-enabled Workday Orchestrate. + Partner with HR, Finance, and other stakeholders to analyze requirements and translate business needs into technical designs for Illuminate solutions. + Monitor Workday releases, especially Illuminate features and developer tools, to assess impact and recommend new functionality. + Develop integrations and automations that uphold high standards for data integrity, security, and responsible AI practices. + Provide technical support and root cause analysis for AI-driven processes, integrations, and extensions. + Use Developer Copilot to automate the generation of code and process documentation. **_Qualifications_** + 5+ years of experience with Workday HCM, including configuration and deployment preferred. + 6+ years of hands-on Workday integration development using Workday Studio, EIBs, and Core Connectors preferred. + Proven experience with Workday Illuminate features, including AI agents, widgets, and orchestrations preferred. + Proficiency in building custom applications and extensions using Workday Extend preferred. + Strong understanding of AI/ML concepts and enterprise chatbot frameworks preferred. + Strong experience with Workday APIs (SOAP and REST) and other web services preferred. + Proficient in relevant programming languages such as XSLT and XML preferred. + Familiarity with Microsoft Entra ID and Teams integration architecture preferred. + Excellent communication and stakeholder engagement skills preferred. + Strong analytical skills to troubleshoot complex issues and deliver innovative solutions preferred. + Proactive approach to learning and staying current with Workday's evolving AI capabilities preferred. + Exposure to Workday's AI roadmap (25R1/25R2/26+) and Illuminate capabilities preferred. + Experience in HRIS strategy, talent analytics, or digital transformation initiatives preferred. + Certifications in Workday Assistant or Workday Extend preferred. + Workday Integration certification preferred. + Experience with generative AI and machine learning platforms preferred. + Familiarity with Agile development methodologies preferred. + Experience with DevOps workflows related to Workday development preferred. **_What is expected of you and others at this level_** + Applies advanced knowledge and understanding of concepts, principles, and technical capabilities to manage a wide variety of projects + Participates in the development of policies and procedures to achieve specific goals + Recommends new practices, processes, metrics, or models + Works on or may lead complex projects of large scope + Projects may have significant and long-term impact + Provides solutions which may set precedent + Independently determines method for completion of new projects + Receives guidance on overall project objectives + Acts as a mentor to less experienced colleagues **Anticipated salary range:** $123,400 - $176,300 **Bonus eligible:** Yes **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/24/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Type: Independent Contractor (1099) Duration: Project Based, with potential for ongoing collaboration Kinsey's brands division is seeking a Product Design Engineer to lead product development initiatives on a contract basis. This 1099 role is ideal for a self-drive professional who excels in concept creation, supplier coordination, and product testing. The Product Design Engineer will work closely with internal and global manufacturing resources to design reliable, cost-effective concepts. Here are some key things we are looking for in an individual: Strong planning and organization skills Clear Verbal & written communication Self-motivation, dedication & discipline Leadership through design & engineering Proficient in design software (such as CAD, Adobe Creative Suite, etc.) Strong knowledge of the outdoor industry Avid participant in archery, firearms, hunting

Job Description Key Responsibilities Engineer out Safety hazards CNC program development and improvements for Lathes, VMC, HMC CNC Tooling selection Work holding / Fixture design Implementation of Lean Manufacturing principles Design cost out of manufacturing processes Develop training documentation Minimum Qualifications Bachelor's degree in Mechanical Engineering Minimum 2 years of CNC programming Strong mechanical and machine design skills Proven ability to analyze and improve manufacturing processes Strong organizational, communication, and interpersonal skills Preferred Qualifications 5+ years of engineering experience in a manufacturing environment Experience with 2D/3D CAD software (CREO preferred) Physical Requirements Must have full range of body motion. Certain operations require repetitive bending, squatting, and full arm extension. Manual lifting, not exceeding fifty (50) pounds, may be required. Able to visit various manufacturing environments. Amsted Rail's commitment to Equal Opportunity/Affirmative Action: Amsted Rail is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to *************************** and select EEO Compliance/Statements. To learn more about us, please visit us online at ******************* #ff-dd

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + Formal degree in Technical Theater, Engineering, Architectural, Industrial Design, Machine Design, CADD preferred, or High School Diploma/GED and equivalent work experience listed below: + Design Experience: minimum 7 years with formal degree + Design Experience: minimum 9 years without formal degree + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - NEW ALBANY, IN Summary/Objective: The Product Engineer designs and develops within New Product or Sustaining Product Engineering. Essential Functions/ Responsibilities: Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products). Works hands on to identify problems during new product development and/or when quality concerns arise. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. Work effectively with different levels and individuals inside and outside of the organization. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience 3 - 5 Year's experience in connector design/manufacturing required. Component, assembly design, and manufacturing experience may be consider in lieu of this. Engineering Design Software: SolidWorks, AutoCAD, etc. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. Must be able to handle multiple projects simultaneously as priorities can change quickly. Must have excellent communication, collaboration, and organizational skills. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required

**Penn State Health** - **Penn State Health Corporation** **Work Type:** Full Time **FTE:** 1.00 **Shift:** Day **Hours:** 7:30a - 4:00p **Recruiter Contact:** Garrett C. Kieffer at ******************************** (MAILTO://********************************) **SUMMARY OF POSITION:** Highly competent Imaging service provider with comprehensive knowledge of one or more imaging modalities. The Imaging Engineer II will be responsible for inspecting, troubleshooting, repairing, installing, and calibrating imaging equipment. The Imaging Engineer II must be capable of completing a first pass on imaging modality service events, with the ability to resolve approximately 70% of events independently (without vendor support) for one or more imaging modalities. Serves as a front-line responder for service events. May cross-train in an additional area of imaging specialty. Highly specialized healthcare technology management (HTM) professional having significant special training in one or more imaging modalities. Performs highly skilled work of considerable difficulty independently. Can be considered a technical expert in specialty area and can mentor other mentors. Can work independently without daily management oversight and manage their workload independently. **MINIMUM QUALIFICATION(S):** + Bachelor's degree in Biomedical or Electronics Engineering required OR Associate's degree in Biomedical or Electronics Engineering two (2) years of experience or equivalent military training required. + Five (5) years of related experience in imaging service plus increased levels of certification and training in imaging specialties required. + Must currently possess and maintain a valid driver's license **WHY PENN STATE HEALTH?** Penn State Health offers exceptional opportunities to learn and grow, exposure to a wide patient population, and the ability to provide individualized, innovative, and specialized care to patients in the community. **Penn State Health offers an exceptional benefits package including medical, dental and vision with no waiting period as well as a Total Rewards Program that highlights a few of the many additional offerings below:** + **_Be Well_** with Employee Wellness Programs, and Fitness Discounts (University Fitness Center, Peloton). + **_Be Balanced_** with Generous Paid Time Off, Personal Time, and Paid Parental Leave. + **_Be Secured_** with Retirement, Extended Illness Bank, Life Insurance, and Identity Theft Protection. + **_Be Rewarded_** with Competitive Pay, Tuition Reimbursement, and PAWS UP employee recognition program. + **_Be Supported_** by the HR Solution Center, Learning and Organizational Development and Virtual Benefits Orientation, Employee Exclusive Concierge Service for scheduling. **WHY PENN STATE HEALTH CORPORATION?** There are many ways to make an impact with one of the leading research, teaching, and clinical healthcare systems in the country. Through a combination of operational, corporate, clinical, and nonclinical roles, we are advancing excellence and innovation in health care together as one team. As Penn State Health continues to evolve for the future, we are committed to hiring dedicated employees who are passionate about delivering the best possible support across our entire integrated health system. Within Penn State Health's Shared Services Entity, we encourage our employees at every turn to continue their education and advancement. Numerous opportunities are available for professional development and career growth. **YOU TAKE CARE OF THEM. WE'LL TAKE CARE OF YOU. State-of-the-art equipment, endless learning, and a culture of excellence - that's Penn State Health. But what makes our healthcare award-winning? That's all you.** _This job posting is a general outline of duties performed and is not to be misconstrued as encompassing all duties performed within the position. Eligibility for shift differential pay based on the terms outlined in company policy or union contract._ _All individuals (including current employees) selected for a position will undergo a background check appropriate for the position's responsibilities._ _Penn State Health is an Equal Opportunity Employer and does not discriminate on the basis of any protected class including disability or veteran status. Penn State Health's policies and objectives are in direct compliance with all federal and state constitutional provisions, laws, regulations, guidelines, and executive orders that prohibit or outlaw discrimination._ **Union:** Non Bargained **Position** Imaging Engineer II - Clinical Engineering Opx **Location** US:PA: Camp Hill | Clinical Engineering | Full Time **Req ID** 88303

at Samtec, Inc Founded in 1976, Samtec is a privately held, $950 million global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. THIS POSITION WILL BE LOCATED ONSITE AT SAMTEC - NEW ALBANY, IN Summary/Objective: The Product Engineer designs and develops within New Product or Sustaining Product Engineering. Essential Functions/ Responsibilities: Developing & writing the Engineering inputs for technical documentation; and adhere to all corporate engineering standards including but not limited to documentation, file management, part modeling, and part simulation. Works directly with Marketing and Sales to review opportunities and develop engineering cost analyses based on Product Scopes, work directly with purchasing, quality, manufacturing engineering, test engineering, process engineering, electroplating, suppliers, and other necessary groups as a cross-functional team to develop products and solutions. Make significant contributions to design, development, and validation of connector solutions (including but not limited to board, cable, power, high speed, and panel mount products). Works hands on to identify problems during new product development and/or when quality concerns arise. Effective use of Office365 including Outlook, Excel, PPT, SharePoint, etc. Work effectively with different levels and individuals inside and outside of the organization. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience 3 - 5 Year's experience in connector design/manufacturing required. Component, assembly design, and manufacturing experience may be consider in lieu of this. Engineering Design Software: SolidWorks, AutoCAD, etc. Simulation Software: FEA, CFD/Thermal Modeling, etc. is preferred, but not required. Must be able to handle multiple projects simultaneously as priorities can change quickly. Must have excellent communication, collaboration, and organizational skills. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent is required SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Apply now Penn State Health - Penn State Health Corporation Work Type: Full Time FTE: 1.00 Shift: Day Hours: 7:30a - 4:00p Recruiter Contact: Garrett C. Kieffer at [email protected] Highly competent Imaging service provider with comprehensive knowledge of one or more imaging modalities. The Imaging Engineer II will be responsible for inspecting, troubleshooting, repairing, installing, and calibrating imaging equipment. The Imaging Engineer II must be capable of completing a first pass on imaging modality service events, with the ability to resolve approximately 70% of events independently (without vendor support) for one or more imaging modalities. Serves as a front-line responder for service events. May cross-train in an additional area of imaging specialty. Highly specialized healthcare technology management (HTM) professional having significant special training in one or more imaging modalities. Performs highly skilled work of considerable difficulty independently. Can be considered a technical expert in specialty area and can mentor other mentors. Can work independently without daily management oversight and manage their workload independently. MINIMUM QUALIFICATION(S): * Bachelor's degree in Biomedical or Electronics Engineering required OR Associate's degree in Biomedical or Electronics Engineering two (2) years of experience or equivalent military training required. * Five (5) years of related experience in imaging service plus increased levels of certification and training in imaging specialties required. * Must currently possess and maintain a valid driver's license WHY PENN STATE HEALTH? Penn State Health offers exceptional opportunities to learn and grow, exposure to a wide patient population, and the ability to provide individualized, innovative, and specialized care to patients in the community. Penn State Health offers an exceptional benefits package including medical, dental and vision with no waiting period as well as a Total Rewards Program that highlights a few of the many additional offerings below: * Be Well with Employee Wellness Programs, and Fitness Discounts (University Fitness Center, Peloton). * Be Balanced with Generous Paid Time Off, Personal Time, and Paid Parental Leave. * Be Secured with Retirement, Extended Illness Bank, Life Insurance, and Identity Theft Protection. * Be Rewarded with Competitive Pay, Tuition Reimbursement, and PAWS UP employee recognition program. * Be Supported by the HR Solution Center, Learning and Organizational Development and Virtual Benefits Orientation, Employee Exclusive Concierge Service for scheduling. WHY PENN STATE HEALTH CORPORATION? There are many ways to make an impact with one of the leading research, teaching, and clinical healthcare systems in the country. Through a combination of operational, corporate, clinical, and nonclinical roles, we are advancing excellence and innovation in health care together as one team. As Penn State Health continues to evolve for the future, we are committed to hiring dedicated employees who are passionate about delivering the best possible support across our entire integrated health system. Within Penn State Health's Shared Services Entity, we encourage our employees at every turn to continue their education and advancement. Numerous opportunities are available for professional development and career growth. YOU TAKE CARE OF THEM. WE'LL TAKE CARE OF YOU. State-of-the-art equipment, endless learning, and a culture of excellence - that's Penn State Health. But what makes our healthcare award-winning? That's all you. This job posting is a general outline of duties performed and is not to be misconstrued as encompassing all duties performed within the position. Eligibility for shift differential pay based on the terms outlined in company policy or union contract. All individuals (including current employees) selected for a position will undergo a background check appropriate for the position's responsibilities. Penn State Health is an Equal Opportunity Employer and does not discriminate on the basis of any protected class including disability or veteran status. Penn State Health's policies and objectives are in direct compliance with all federal and state constitutional provisions, laws, regulations, guidelines, and executive orders that prohibit or outlaw discrimination. Union: Non Bargained Apply now Join our Penn State Health Talent Network Get job alerts tailored to your interests and updates on new roles delivered to your inbox. Sign Up Now

Job Title: Manufacturing EngineerJob Description As a Manufacturing Engineer, you will provide comprehensive support to our manufacturing operations, focusing on project management and continuous improvement initiatives. You will play a pivotal role in the development and execution of centralized improvement plans, ensuring quality and efficiency within the manufacturing process. Responsibilities + Provide overall Manufacturing Engineering Support for manufacturing operations. + Actively carry out and supervise tasks related to projects. + Guide and support project members, ensuring successful project completion. + Evaluate and measure project results and participate in verification and validation work. + Coordinate and train staff on continuous improvement initiatives and audit current procedures. + Make recommendations for customer standards, quality assurance, and efficiency. + Develop and communicate a centralized continuous improvement plan. + Present ideas and plans for improvement, backed by data and metrics. + Engage employees and overcome resistance to changes in duties. + Create and conduct formal training courses for process improvements. + Provide informal coaching on new or changed improvement initiatives. + Participate in the development process for new products and changes in existing products. + Report issues and recurrent defects to the Engineering team. + Participate in cross-functional teams for design reviews and support company 5S initiatives. + Design/build simple equipment and assure work instructions are correct. + Conduct time studies and ensure assembly tools are available. + Abide by all safety protocols. Essential Skills + Strong mechanical or electrical skills. + Experience with leak detection. + Ability to design/build simple equipment (tools, jigs, fixtures, racking). + Ability to write technical documents. + Technical understanding of HVAC systems and components. + Understanding of Management system's standards (e.g., ISO9001, ISO14001). + Understanding of customer requirements and improvement tools (e.g., 8D, PPAP, Lean, Poka Yoke, 5&Why analysis). Additional Skills & Qualifications + College degree in Engineering or equivalent hands-on experience. + Proficient in reading technical drawings and using MS Office (Outlook, Word, PowerPoint, Excel). + Organized, energetic, and with strong problem-solving skills. + Good interpersonal and communication skills, both verbal and written. + Demonstrated diplomacy and professionalism. Work Environment The work environment is dynamic, with a strong emphasis on continuous improvement and innovation. Engineers will work closely with cross-functional teams and will have access to company-provided computers for data analysis and graphic presentation. The role requires adherence to all safety protocols and supports initiatives like 5S to maintain an efficient workspace. Job Type & Location This is a Permanent position based out of York, PA. Pay and Benefits The pay range for this position is $80000.00 - $90000.00/yr. 2022 SALARIED EMPLOYEES - BIWEEKLY CONTRIBUTIONS COST SHEET 2022 - Medical PPO 1000 Plan Bi-Weekly Contributions $43.27) Employee Only  $108.06  $119.69  $123,46  $134.87 Employee & Spouse  $218.64  $228.14  $230.52  $294.70 Employee & Child(ren)  $202.91  $257.30  $275.64  $298.28 Employee & Family  $293.48  $330.16  $351.75  $383.96 2022 - Medical PP0 2500 Plan Bi-Weekly Contributions $43.27) Employee Only  $ 92.23  $102.44  $102.63  $126.76 Employee & Spouse  $185.19  $192.73  $193.58  $209.50 Employee & Child(ren)  $169.18  $218.11  $237.40  $266.62 Employee & Family  $239.43  $273.19  $286.20  $339.94 2022 - Medical HSA 3000 Plan Bi-Weekly Contributions $43.27) Employee Only  $ 70.93  $ 83.66  $ 87.02  $104.83 Employee & Spouse  $128.27  $136.02  $141.68  $155.99 Employee & Child(ren)  $141.12  $162.28  $179.77  $199.16 Employee & Family  $152.68  $177.23  $221.55  $240.76 2022 - DENTAL AND VISION PLAN OPTIONS - BIWEEKLY CONTRIBUTIONS METLIFE DENTAL METLIEF VISION Employee Only  $10.76  $ 4.28 Employee & Spouse  $22.68  $ 7.20 Employee & Child(ren)  $26.09  $ 7.35 Employee & Family  $38.91  $11.63 Workplace Type This is a fully onsite position in York,PA. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

ASC Engineered Solutions is looking for a Manufacturing Engineer who will play a crucial role in optimizing production processes. The individual will be responsible for analyzing existing processes, identifying areas for improvement, and implementing solutions. How You Will Help * Evaluate current manufacturing processes and develop effective automated and non-automated system solutions to achieve improved cost of operation and material flow. * Analyze production processes, schedules, methods and other data and then provide management with reports containing the data and statistics to enable management to better understand future requirements needed for the manufacturing process. * Evaluate quality control processes and make recommendations for improvements in quality control. * Ensure that the company's manufacturing processes are following all government laws and regulations. * Review and calculate labor, material and other production costs along with reviewing schedules and future production requirements to assist management in decision making. * Analyze and plan workflow, equipment placement and space requirements to improve manufacturing efficiency. * Coordinate equipment maintenance and repair services and make sure that the manufacturer's procedures and instructions are followed in order to keep production equipment operational. What You Will Bring * Bachelor's degree in manufacturing, systems, or related engineering field * 3-5 years relevant experience in CNC, Robotics, Automated system * Ability to work well under pressure * Leadership skills * Teamwork skills * Problem-solving and troubleshooting skills * Good information technology skills * Excellent communication skills * Knowledge of equipment for purchase, installation and repair * CNC Machining * Robotics * Automation (Allen Bradley/Rockwell)

Polymer Concepts Technologies PBY, Inc. KRS Division dba Kaydon Ring & Seal (“KRS”) is responsible for Aerospace and Industrial applications. KRS has a customer portfolio that includes all major players in the Aerospace and Industrial industries. Our business is fully customer focused, with products specifically designed for an engine/airframe application and then produced in small quantities and small lots on highly flexible equipment. Extreme product range fragmentation, complex product design, very high-quality standards and traceability requirements are the peculiarity of KRS. The Manufacturing Engineer is responsible for establishing and coordinating the implementation of effective and economical methods for the Sealing Rings Department. Duties and Responsibilities (including and not limited to): Plans and coordinates preparation of project documentation such as engineering drawings, BOM, production specifications and routings, to ensure product and process requirements are met. Designs and directs installation of mechanical or electromechanical products or plant systems. Designs tooling and fixtures for production processes. Directs and coordinates activities involved in acquisition and installation of mechanical or electromechanical products and systems. Coordinates preparation of project documentation such as engineering drawings, production specifications and schedules to ensure project requirements are met. Independently analyzes product and equipment specifications and performance requirements to determine product characteristics which can be produced by existing manufacturing or processing equipment and methods. Provides technical information concerning manufacturing or processing techniques, materials, properties, and process advantages and limitations which affect long range plant and product engineering planning. Confers with operating personnel to create and implement operating procedures and resolve system malfunctions. Develops models of alternate processing methods to test feasibility of new applications of system components and recommends implementation of improved procedures. Confers with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost. Coordinates engineering activities concerned with development, procurement, installation, and calibration of equipment, and control devices required to support the production process. Develops and writes equipment specifications, performance requirements, cost analysis, and proposal for integrating machinery and equipment into manufacturing process. Prepares or directs preparation of process layout and detailed drawings and schematics. Complete detail drawings utilizing current CAD technologies to request parts fabrication by machine shops. Uses computer assisted engineering and design software to write operating programs for equipment, to develop tooling designs and CNC programs for unique one of kind processes. Plans and develops experimental test programs under operational conditions to investigate process proposals for improving equipment performance or other factors. Analyzes work force utilization, facility layout, and operational data such as production costs, process flow charts, and production schedules, to determine efficient utilization of workers and equipment. Education and Experience Requirements: Must be a US Person. Bachelor's Degree of Science in Mechanical Engineering, Industrial Engineering or Manufacturing Engineering Technology and minimum of 2 years related experience and/or training. Skill Requirements: Requires strong knowledge of machinery and experience in machining centers and grinding. Requires strong knowledge of geometric dimensioning and tolerancing. Knowledge of CAD/CAM systems required. SPC experience required. CNC controls and programming are preferred. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to write reports, business correspondence, and procedure manuals. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Benefits Highlights: Safe Harbor 401k Plan with Company match up to 3.5% Medical, dental, vision and voluntary benefits on the 1st of the month following hire date PTO Bonus eligible Company paid life insurance, short-term disability and long-term disability Temperature controlled work environment -- yes, even on the production floor! KRS Division is an equal employment/affirmative action employer. If you need accommodation for any part of the employment process because of a medical condition or disability, call the Human Resources department at ************************ to let us know the nature of your request.

Full-time Description Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: All aspects of initial product design including: Innovative concept generation Excel or hand calculation analytical analysis 3-D CAD modeling (Solidworks) CFD/FEA analysis 2-D Drawing creation Fabrication procedure and work instruction development Working cohesively with a diverse group of engineers and technicians Managing program schedules and budget Frequent customer communication/interaction Requirements Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! Good verbal and written skills. Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + BA/BS/BFA in technical theater, engineering, architecture, industrial design, product design and 4+ years of experience working in a related technical field **OR** 7+ years of design experience in live entertainment technology or adjacent field + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AB TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Job Title: Manufacturing EngineerJob Description As a Manufacturing Engineer, you will provide comprehensive support to our manufacturing operations, focusing on project management and continuous improvement initiatives. You will play a pivotal role in the development and execution of centralized improvement plans, ensuring quality and efficiency within the manufacturing process. Responsibilities * Provide overall Manufacturing Engineering Support for manufacturing operations. * Actively carry out and supervise tasks related to projects. * Guide and support project members, ensuring successful project completion. * Evaluate and measure project results and participate in verification and validation work. * Coordinate and train staff on continuous improvement initiatives and audit current procedures. * Make recommendations for customer standards, quality assurance, and efficiency. * Develop and communicate a centralized continuous improvement plan. * Present ideas and plans for improvement, backed by data and metrics. * Engage employees and overcome resistance to changes in duties. * Create and conduct formal training courses for process improvements. * Provide informal coaching on new or changed improvement initiatives. * Participate in the development process for new products and changes in existing products. * Report issues and recurrent defects to the Engineering team. * Participate in cross-functional teams for design reviews and support company 5S initiatives. * Design/build simple equipment and assure work instructions are correct. * Conduct time studies and ensure assembly tools are available. * Abide by all safety protocols. Essential Skills * Strong mechanical or electrical skills. * Experience with leak detection. * Ability to design/build simple equipment (tools, jigs, fixtures, racking). * Ability to write technical documents. * Technical understanding of HVAC systems and components. * Understanding of Management system's standards (e.g., ISO9001, ISO14001). * Understanding of customer requirements and improvement tools (e.g., 8D, PPAP, Lean, Poka Yoke, 5&Why analysis). Additional Skills & Qualifications * College degree in Engineering or equivalent hands-on experience. * Proficient in reading technical drawings and using MS Office (Outlook, Word, PowerPoint, Excel). * Organized, energetic, and with strong problem-solving skills. * Good interpersonal and communication skills, both verbal and written. * Demonstrated diplomacy and professionalism. Work Environment The work environment is dynamic, with a strong emphasis on continuous improvement and innovation. Engineers will work closely with cross-functional teams and will have access to company-provided computers for data analysis and graphic presentation. The role requires adherence to all safety protocols and supports initiatives like 5S to maintain an efficient workspace. Job Type & Location This is a Permanent position based out of York, PA. Pay and Benefits The pay range for this position is $80000.00 - $90000.00/yr. 2022 SALARIED EMPLOYEES - BIWEEKLY CONTRIBUTIONS COST SHEET 2022 - Medical PPO 1000 Plan Bi-Weekly Contributions $43.27) Employee Only $108.06 $119.69 $123,46 $134.87 Employee & Spouse $218.64 $228.14 $230.52 $294.70 Employee & Child(ren) $202.91 $257.30 $275.64 $298.28 Employee & Family $293.48 $330.16 $351.75 $383.96 2022 - Medical PP0 2500 Plan Bi-Weekly Contributions $43.27) Employee Only $ 92.23 $102.44 $102.63 $126.76 Employee & Spouse $185.19 $192.73 $193.58 $209.50 Employee & Child(ren) $169.18 $218.11 $237.40 $266.62 Employee & Family $239.43 $273.19 $286.20 $339.94 2022 - Medical HSA 3000 Plan Bi-Weekly Contributions $43.27) Employee Only $ 70.93 $ 83.66 $ 87.02 $104.83 Employee & Spouse $128.27 $136.02 $141.68 $155.99 Employee & Child(ren) $141.12 $162.28 $179.77 $199.16 Employee & Family $152.68 $177.23 $221.55 $240.76 2022 - DENTAL AND VISION PLAN OPTIONS - BIWEEKLY CONTRIBUTIONS METLIFE DENTAL METLIEF VISION Employee Only $10.76 $ 4.28 Employee & Spouse $22.68 $ 7.20 Employee & Child(ren) $26.09 $ 7.35 Employee & Family $38.91 $11.63 Workplace Type This is a fully onsite position in York,PA. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Full-time Description Who We Are: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets including Defense, Aerospace, High-Performance Computing, Power Electronics, Medical and HVAC industries. We provide thermal products and engineering services to the world's leading defense and commercial companies such as Intel, Hewlett Packard (HP), GE Healthcare, Google, Facebook, Lockheed Martin, Northrop Grumman, Boeing, and General Electric. We also conduct advanced research and development work for government agencies including NASA, DOD, and DOE. Our products and technologies have become integral parts of numerous mission-critical devices, from life-saving MRI and CT scanners to energy-efficient building HVAC systems to weather and telecommunications satellites, and even Lunar Rovers and Landers. ACT is strongly committed to our customers, employees, and our community. Innovation, Teamwork and Customer Care are our core values that drive the continuous growth of our company. Our skilled and dedicated staff is our strongest resource and the critical factor in our ongoing success. Position summary: The Product Development Engineer in our Vaporization and Refrigeration group supports various phases of Environmental Control Unit (ECU) and Liquid Chiller projects ranging from concept generation and initial design to prototype hardware fabrication and volume production. The types of projects vary from modifications of existing designs to “blank sheet of paper” development programs and advanced performance testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Product Development Engineers work on a multi-disciplinary team including Electrical Engineering resources and CAD Designers to effectively develop complex systems. Candidates that have a strong technical background with experience in design for manufacturability of complex systems excel at this position. Responsibilities Include: All aspects of initial product design including: Innovative concept generation Excel or hand calculation analytical analysis Refrigeration (Vapor Compression) system design and component selection Refrigeration schematic generation Requirements and Verification Matrix (RVM) generation and review 3-D CAD modeling (SolidWorks) 2-D Drawing creation CFD/FEA analysis for mechanical/thermal/hydraulic performance prediction Fabrication procedure and work instruction development Working with a diverse group of engineers and technicians Managing program schedules and budget Frequent customer communication Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. The ideal candidate will possess the following qualities: Initiative: Product Development engineers don't have a daily agenda given to them and are expected to take it upon themselves to work closely with customers, vendors and ACT personnel to fulfill projects goals and objectives. Technical knowledge: We are looking for a candidate who has a strong real-world engineering background, coupled with hands-on skills and fabrication and testing capabilities. Teamwork skills: As a member of the product development team, the ideal candidate must have the ability to give and receive encouragement and constructive criticism, communicate effectively, and work cooperatively with team members to achieve common goals. Critical thinking skills: The product development customer and projects vary widely, and the strategies and design approaches that worked for one program may be completely different for the next opportunity. Because of that, we need a curious individual who loves to dive in, experiment, and develop innovative solutions to new challenges. Desire to grow: The ideal candidate wants to be the best at their job and is never content with "good enough". They set lofty goals and constantly seek to improve themselves and expand their professional knowledge and skillset. They desire to sharpen their engineering and project management skills and grow in leadership ability and responsibility. ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements US citizenship or permanent residency strongly preferred due to ITAR requirements B.S. or M.S. degree in Mechanical Engineering or another relevant field Basic understanding of refrigeration systems Proficiency in using commercial CAD (Solidworks) and FEA (Solidworks) tools, along with refrigeration system design tools 3-5 years of hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing Good verbal and written communication skills