Safety manager jobs in Tallahassee, FL - 1,086 jobs

Atlas Roofing Corporation is a recognized leader in the building materials industry, driven by innovation, customer focus, and operational excellence. Our Shingles, Underlayment & Ventilation (SUV) division is at the forefront of product development and manufacturing, supporting our mission to provide high-quality, sustainable roofing solutions. From a single asphalt shingle manufacturing facility in 1982, Atlas has grown to 36 facilities in North America providing worldwide product distribution. Today, products from the company's four major divisions, Polyiso Roof & Wall Insulation, Shingle & Underlayment, Molded Products, and Web Technologies, are manufactured in state-of-the-art facilities and shipped from our network of manufacturing plants and distribution facilities in the United States, Canada, and Mexico. It's amazing how our first customer philosophy has grown on our clients. Atlas Roofing Shingles, Underlayments, & Ventilation is seeking an Environmental, Health, and Safety Manager for our shingle manufacturing facility in Hampton, Georgia. This role serves as a subject matter expert on all EHS matters including (but not limited to): worker safety, occupational health, industrial hygiene, and environmental compliance. EHS Manager Primary Responsibilities Monitor and evaluate the impact of new OSHA, EPA, and/or DOT laws, regulations, and industry standards. Facilitate the contractor and supplier pre-qualification process using ISNetworld contractor management platform. Develop and implement environmental compliance plans and reports for air quality, storm water, wastewater treatment, and hazardous waste management. Ensures required records, permits, and reports are maintained and prepared according to established guidelines by local, state, and federal agencies. Create / modify site-specific policies, procedures, and written programs as needed - ensuring alignment with Corporate EHS documents. Conduct regular plant safety audits, including inspection of facilities, worksites, equipment, work practices, and safety devices to ensure compliance with required safety standards, regulations, and Company policies. Identify hazardous workplace conditions, perform, and document job hazard analysis. Coordinate activities to ensure corrective and preventative actions are implemented. Manage the investigation and assessment of work-related injuries, illnesses, Near Misses, and other EHS-related incidents. Work with Human Resources on workers compensation and Return to Work programs. Plan, develop, and coordinate all Company and regulatory-required safety meetings and training programs. Maintain liaisons with outside organizations, such as fire departments, mutual aid societies, and rescue teams so that emergency responses can be facilitated. Participate in the development, understanding, and review of Job Safety Analyses (JSAs) for each position within the facility. Remain informed of any changes or the development of new EHS regulations that are applicable to the business; keep Senior Management and plant leadership informed accordingly. EHS Manager Experience and Education Five (5) or more years of Environmental, Health & Safety management experience in the Construction Industry. Experience in managing projects throughout all phases of construction Bachelor's degree in occupational safety (preferred) ; or equivalent combination of education and experience. EHS Manager Knowledge, Skills & Abilities Extensive knowledge of company safety policies and applicable Occupational Safety and Health Administration (OSHA) standards. Excellent written and verbal communication skills. Must have the ability to interact and work effectively with all levels or organization. Ability to prepare and facilitate training on various EHS topics. Excellent organizational skills and attention to detail. Proficiency with Microsoft Office and similar computer software. Total Compensation Atlas Roofing Corporation offers competitive compensation and vacation/holiday package as well as a comprehensive benefits program including Medical, Dental, Vision, Life/AD&D/LTD insurance, 401k and Medical Spending Accounts. Atlas Roofing Corporation is an Equal Employment Opportunity Employer. No calls or agencies please.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing's Chief Aerospace Safety Office (CASO) is looking for an Experienced (Level 3) or Senior (Level 4) Safety & Airworthiness Knowledge & Proficiency Analyst to join our team. Join the esteemed CASO team, where we are dedicated to ensuring the highest standards of safety and excellence in the aerospace industry. As part of CASO, you will have the opportunity to contribute to critical safety initiatives and collaborate with industry-leading professionals. In this role, you will be responsible for supporting the designing and implementing learning strategies, training programs, and developing employees' skills and knowledge. You will play a pivotal role in fostering a culture of continuous learning and professional development within our organization, shaping, and influencing the learning strategy and culture across the company. The ideal candidate will possess strong communication skills, decision-making abilities, and the ability to foster collaboration and unity among team members. This role reports to the Safety & Airworthiness Engineering Function Workforce Development team, under the guidance of the Functional Chief Engineer. At our organization, we foster a work culture that values and supports our employees, creating a positive and supportive environment where everyone feels valued, engaged, and motivated. We prioritize trust, collaboration, and empowerment. If you are seeking a team that embodies these values and offers exciting opportunities for growth and development, we invite you to join our team. Primary responsibilities: Assist in the development, implementation, and maintenance of learning solutions for Safety & Airworthiness leaders, engineers, and specialists within the Safety & Airworthiness University Create, collaborate, and facilitate organizational learning strategies for the Safety & Airworthiness University across the existing colleges Collaborate and align with other engineering colleges and universities across the enterprise with specific focus on supporting the Colleges within the Safety and Airworthiness University and CASO organization Participate in and assist in facilitating University Community of Practice Alliance Support content curation and development of learning experiences in various formats, including web-based, instructor-led, virtual, video, Degreed pathways, and micro-learning Foster a culture of learning, implement measure of effectiveness, and support complex learning initiatives and projects Utilize a range of tools and platforms such as Storyline, Adobe Premier, Getty Images, Microsoft Office, company learning management systems, and Degreed Collaborate with technical experts to support the development of informative and relevant learning solutions Assess learning needs and collaborate with stakeholders to address organization-wide training requirements Ensure learning solutions align with organizational and functional strategy and add value to existing content Enable agile work environments through team collaboration, sprints, and iterations, focusing on tangible and metrics-driven business and user outcomes Assist in development of competency and proficiency measures supporting increased proficiency across the organization and function Ensure alignment between knowledge management, technical development, and skill management efforts This position is hybrid. This means that the selected candidate will be required to perform some work onsite at one of the listed location options. This is at the hiring team's discretion and could potentially change in the future. Basic Qualifications (Required Skills and Experience): Bachelor or higher from an accredited university Level 3: 6+ years of related work experience or an equivalent combination of education and experience Level 4: 10+ years of related work experience or an equivalent combination of education and experience 5+ years of experience working in the field of Learning and Development or Knowledge Management with specific knowledge of Adult Learning Theory Experience within learning and development and/ or employee development and training 3+ years of experience supporting the development or maintenance of E-Learning Experience in a role that required excellent communication, project management, presentation, and facilitation skills Experience with and proficient in Microsoft Office Suite 3+ years of experience working within Learning Management System (LMS) and Instructional Design tools in learning environments Experience in building strong business relationships with internal and external stakeholders 2+ years of experience communicating and presenting with the ability to effectively convey complex information to large audiences Ability to travel up to 20% of work time Preferred Qualifications (Desired Skills and Experience): Ability to manage multiple projects simultaneously, prioritize tasks, and meet deadlines in a fast-paced environment Understanding of User Experience design Experience with HTML and Wordpress Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: * Experienced (Level 3): $87,550 - $136,850 * Senior (Level 4): $109,650 - $171,350 #CASO Applications for this position will be accepted until Feb. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Read more Shows the full job description for sighted users Apply Now Save JobRemove Job

As a member of the US/Canada EHS Team, the Tuscaloosa Plant EHS Manager will be responsible for managing and sustaining the EHS management system, driving EHS performance , analyzing and finding trends to drive action. The Role Your work will include, but not be limited to: Ensure execution of EHS policies, providing guidance on program feasibility, and implementing EH&S corporate directives and guidelines for locations within responsibility. Partner with and influence all departments, Operations, ensuring their needs are supported and coordinated with EHS requirements, guidance, and best practices. Perform recurrent (weekly, monthly, quarterly, or annual) depending on the necessity) EHS reviews with applicable departments, with key operating leaders and EHS team to ensure a satisfactory performance on EHS metrics and develop and track plant specific improvements plans to drive continuous improvement of EHS programs and processes. Establish and maintain appropriate compliance assurance processes and adhere to company specific EHS requirements; Perform and coordinate audits to ensure compliance to applicable legal and other requirements (customers, investor, and corporate requirements) in the assigned plant. Assist with aggressive abatement of findings, and tracking actions to closure. Ensure data integrity, accurate and on time reporting. Ensure thorough incident investigations are conducted for all significant EHS incidents. Publish EHS Alerts for incidents, and coordinate read across of relevant EHS incidents occurring at assigned company sites. Establish, implement, manage & sustain the EHSMS (ISO14001 & ISO45001). Guide initiative-taking plans to identify and control risks. Establish relationships with regional governmental agencies, as appropriate; interact and negotiate with governmental entities on behalf of the company. Ensure injured worker information is submitted to the Third-Party Administrator (TPA) in a timely manner. Interact with the TPA and medical community to gain an understanding of the status of claims. Interact with plant management to ensure an effective Return to Work program. Create workers' compensation user control reports on a periodic basis. Maintain the OSHA 300 log and ensure injuries/illnesses are accurately logged. Ensure the implementation and management of Ergonomic, Sustainability and Continuous Improvement programs to boost the EHS culture. Manage the By Product Management Program to assure the right disposition of all by products (waste materials). Ensure legal and corporate requirement compliance when opening/closing a plant. Coordinate budget planning to ensure needed capital and expense funding is included in the businesses operating plan. Your Qualifications 4 Year University Degree in Occupational Safety or Environmental or associated field desired Ability to interact with EHS across multiple sites and across different regions. Availability to travel to support EHS leaders toward initiatives implementation. Experience executing activity based on standard work and project plans, meeting deadlines, and communicating challenges and opportunities to improve. Experience working independently with limited supervision. Ability to work effectively with business leaders. Bonus If You Have Master's Degree in Occupational Safety or Environmental or associated field desired Previous experience in a JIT manufacturing facility

About Alston Construction: Alston Construction Company is a nationwide general contractor, with more than 20 offices coast to coast. For over 35 years we have delivered on our promises to our employees, clients, and business partners. We offer extremely competitive salaries, a superb benefits package, and a great place to work! In addition to routinely receiving awards for our projects and safety performance, we have also received numerous "Best Places to Work" awards! We look for passionate construction professionals who share our core values, to include: commitment, integrity, teamwork, and respect. As our CEO, Paul Little, says "In order to be successful at Alston Construction, you must enjoy seeing success in others." If this sounds like you and what you're looking for, we'd love to hear from you! Our top tier benefits package includes medical, dental, vision, prescription safety glasses, short-term disability, long-term disability, life insurance/AD&D, HSA, health FSA, dependent daycare FSA, EAP, 401(k), Roth 401(k), After-Tax Roth In-Plan Conversion; paid vacation and sick time, paid holidays, tuition reimbursement, Tickets at Work, paid Identity Theft Protection (family coverage) and more! Job Title: EHS Manager - Mission Critical Job Summary: Responsible for assisting management and Site Supervision in the general business operations of the company by overseeing and directing the company's Safety Program for their assigned project(s). The EHS Manager will ensure training all site employees on the Safety Program and will act as a resource for safety related items. The overall goal of the EHS Manager is to protect the Company's interests and support employees so that they can successfully complete a quality project safely, while promoting and enhancing client relationships and the company's image. Essential Duties and Responsibilities will include: Support and promote Alston Construction's strong safety culture, both internally and externally. Use discretion and independent judgment and professional skills to perform daily duties and to resolve issues. Implement site safety policies and procedures in compliance with local, state, and federal rules and regulations (including Occupational Safety and Health Administration/OSHA) and ensure organizational compliance with these policies and regulations. Make and implement recommendations to improve processes and procedures, looking for ways to continuously improve the Safety Program, Site Specific Safety and Health Plan, Job Hazard Analysis' and related policies and procedures. Remain current on all federal, state, and local construction-related safety regulations and laws. Identify training needs in order to develop and implement safety awareness initiatives that improve safety performance and meet regulatory requirements. Manage and conduct Alston Construction's Jobsite Safety Orientations for new workers. Monitor, manage, and conduct EHS training in accordance with Alston Construction's EHS training matrix and established guidelines and priorities. Manage workload and time related to EHS training, including use of outside training resources as appropriate, to ensure efficient and effective training without sacrificing direct interaction with Alston Construction staff on project related operations. Design and implement metrics to monitor progress and effectiveness of safety initiatives, programs, policies, procedures and processes. Provide guidance, consultation, and reinforcement to Superintendents, Project Managers, and other personnel regarding safety policies and subcontractor compliance. Create and maintain first aid supplies, emergency response and crisis management plans. Conduct regular safety inspections, review safety compliance of work locations and job sites, develop action steps to correct deficiencies, prepare and distribute detailed reports of findings, and follow up to ensure measures have been implemented. Ensure project field documentation related to safety is being properly processed and maintained. Attend and participate in Safe Start (PreCon) Meetings with Subcontractors. Review Alston Construction and subcontractor Site Specific Safety and Health Plans (SSSHPs) and ensure copies are on site. Maintain and review submitted Safety Data Sheets (SDSs) from Subcontractors. Coordinate and jointly conduct (with Project Supervision) Weekly All Hands Safety Meetings. Maintain records of participation by Subcontractors. Ensure Job Hazard Analyses (JHAs) are completed and reviewed, and signed off by the subcontractor workers. File submitted JHAs received by Subcontractors. Manage OSHA site visits and inspections and ensure appropriate reporting is made to government agencies. Investigate all incidents (near-misses to fatalities) utilizing the Root Cause Analysis format and report findings to the Senior EHS Manager/ Regional Safety Director, Corporate Safety and Executive Vice President. Education, Experience, and Licensing/Certifications: Bachelor's degree in Occupational Safety and Health or related field. Minimum of 5 years of experience in construction safety management with a construction general contractor. An equivalent combination of education and experience will be considered. Valid State-issued driver's license and satisfactory driving record and vehicle insurance which meets Alston Construction liability coverage requirements. OSHA 30-hour Certification. OSHA 500 preferred. First Aid/CPR/AED Certification. EHS training/certifications in areas such as Fall Protection, Scaffolding, Excavation and Trenching, HAZCOM, etc. CSP, CHST or other safety certification preferred. Alston Construction is an Equal Opportunity Employer.

The position will be responsible to provide site safety leadership, ensure facility compliance with company's safety standards, implement safety directives, improve safety performance, and ensure facility safety policies and procedures are aligned with governmental regulations. This position will also be responsible for Environmental efforts, overseeing Occupational Health and Safety. Job Duties Incident/Exposure Reporting and Investigation. Manager and implement the Incident/Exposure Reporting and Investigation program. Ensure the program prescribes methods and practices for reporting and investigating incidents. Worker's Compensation Claim Management, in partnership with Human Resources. Review, monitor, and manage the claims process. Manage the early return to work and modified duty program, monitor and analyze accident and injury trends, identify areas of increased training and emphasis of incident prevention. Emergency Action Plan. In conjunction with facilities and engineering, ensure company's EAP is current and implemented. Ensure appropriate individuals are trained in the processes and procedures should the plan be activated. Ensure and coordinate all forklift drivers, machine operators, sanitation workers, mechanics, DOT drivers are licensed accordingly, trained and with compliance. Maintain companies Personal Protective Equipment, Machine Safety & Equipment usage, Lockout/Tagout, Hazardous Communication etc. are communicated to employees accordingly, and training is performed as required. Ensure Record Keeping and Posting Requirements documentation are maintained per mandated record retention regulations. Coordinate monthly meetings. Perform weekly/monthly/quarterly inspections of both plant facilities and report any and all concerns to management. Works with Human Resources Management to conduct monthly employee committee meetings. Work & Qualification Requirements 7+ years of progressive safety experience Excellent verbal and written communication skills Thorough knowledge of applicable regulations (OSHA) Creativity, innovation and the ability to solve problems and generate viable solutions. Must have good time management skills and be able prioritize duties. Bilingual in English and Spanish is preferred but not required.

We are seeking an experienced Health, Safety, and Environmental (HSE) Manager to lead and oversee all EHS programs at our Panama City location. This role will drive compliance with OSHA, EPA, ISO 14001, and OHSAS 45001 standards, while cultivating a zero-incident safety culture and supporting sustainability initiatives. Key Responsibilities: Lead site-wide HSE programs, training, audits, and compliance with regulatory standards. Conduct inspections, incident investigations, and risk assessments to ensure a safe workplace. Partner with leadership and regulatory agencies to maintain environmental, health, and safety compliance. Mentor and manage safety staff, while driving continuous improvement in safety systems. Support ESG initiatives including emissions tracking and sustainability goals. Qualifications: Bachelor's degree in Occupational Safety, Environmental Science, Engineering, or related field. 5+ years of HSE program management experience in a manufacturing environment. Strong knowledge of OSHA, EPA, ISO standards, and HSE management systems. Proven leadership skills with experience supervising teams. TWIC eligibility required. Experience in oil, gas, or petrochemical industries is a plus. If you are a safety-focused leader who thrives in a fast-paced environment and is passionate about protecting people, property, and the planet - we'd love to hear from you!

This role is responsible for leading Quality, Health, Safety, and Environmental (QHSE) programs within a manufacturing facility to ensure employee safety, regulatory compliance, and consistent product quality. The position oversees the implementation and maintenance of quality management systems, environmental and safety programs, and continuous improvement initiatives to ensure products meet customer, regulatory, and industry requirements. This role partners closely with operations, engineering, and leadership teams to identify risks, drive corrective actions, and strengthen a culture of safety, accountability, and quality excellence across the plant. Key Responsibilities • Lead the planning, development, and execution of QHSE policies, programs, and initiatives • Ensure ongoing compliance with applicable regulatory requirements, customer standards, and certifications including ISO 9001:2015 and ISO 14001:2015 • Maintain and continuously improve the Quality Management System (QMS) and Environmental Management System (EMS) • Develop and enforce health and safety processes to ensure a safe working environment for all employees • Train, coach, and mentor employees and leadership on QHSE standards and best practices • Lead root cause analysis, corrective and preventive actions, and continuous improvement efforts related to quality, safety, and environmental issues • Conduct risk assessments, safety audits, incident investigations, and quality/process audits to proactively identify and mitigate risks • Serve as the primary point of contact for internal and external audits, regulatory inspections, and customer inquiries • Establish and track key performance indicators (KPIs) related to quality, safety, and environmental performance • Report QHSE performance, trends, and improvement opportunities to plant leadership • Promote awareness and accountability for customer quality requirements, regulatory obligations, and internal standards across the organization • Manage local quality objectives and improvement programs and participate in broader organizational initiatives as needed • Collaborate cross-functionally to drive continuous improvement and foster a strong safety and quality culture • Provide direction and oversight to QHSE support staff as applicable Additional Responsibilities This role requires flexibility and may include additional duties aligned with the individual's skills, experience, and business needs. Qualifications, Education & Experience • Bachelor's degree in Engineering, Business, or a related field, or equivalent combination of education and experience • OSHA 30-hour certification or ability to complete within six months of hire • 5+ years of hands-on experience in a manufacturing environment • Demonstrated experience leading or supporting ISO certification efforts (ISO 9001 and/or ISO 14001) • Strong knowledge of quality systems, auditing methods, and risk assessment practices • Working knowledge of OSHA, EPA, and applicable environmental and safety regulations • High level of integrity with the ability to handle sensitive information confidentially • Advanced proficiency in Microsoft Office (Word, Excel, PowerPoint) • Strong leadership, communication, and collaboration skills • Proven ability to influence and engage employees, leadership, and contractors • Excellent organizational skills with the ability to manage multiple priorities in a fast-paced environment • Proactive problem-solving mindset with a continuous improvement focus

The Opportunity: Contribute To The Growth Of Your Career. Responsible for maintaining adherence to corporate Environmental, Health & Safety (EHS) policies, procedures and federal, state and local regulations in U.S. facilities by geographic area. The Regional EHS Manager role may support either Store locations by regional area or DCs/FCs, ARRCs, and Service Centers by regional area. Uses reporting and analytics to provide recommendations for compliance and conducts regular site visits to validate execution is maintained in all areas of EHS. Supports development and executes TJX's Environmental, Health and Safety programs through injury and illness prevention and regulatory compliance efforts on all incident and injury claims. Major Areas of Responsibility Responsible for supporting the Manager of EHS Compliance on development, implementation and execution of company programs by ensuring compliance with all federal, state, and local codes regarding Environmental, Health and Safety. Implements companywide Injury and Illness Prevention Plan (IIPP) that includes all required OSHA programs and Associate training requirements by geographic region. Provides comprehensive site risk assessments and EHS data analysis to build trust and confidence with the EHS team and business partners to drive influential change. Monitors industry regulatory trends and partners with the EHS team and senior leadership teams on OSHA, Department of Health and other regulatory agency preparedness procedures to proactively address potential challenges. Supports the Mgr of EHS Compliance in all OSHA, Department of Health and regulatory agency investigative responses and abatements. Coordinates serious injury and illness investigations with Legal. Completes depositions and testimony as needed on behalf of Company on contested OSHA matters. Evaluates and identifies loss-producing physical conditions and Associate behaviors and provides recommendations to reduce injuries, illnesses and related costs. Submits evaluations to senior management for use in performance appraisals. Ensures company developed loss reduction strategies, policies and procedures are implemented in the facilities and makes recommendations for better adherence to those policies and procedures. Completes timely and robust injury reporting procedures and follows up with TJX Workers Compensation team, General Liability team and Insurance carriers. Monitors execution of all injury and illness reviews with senior and facility level leadership and leads correction of non-compliance. Special projects as assigned. Who We Are Looking For: You. Bachelor's degree in Safety & Health, Industrial Engineering, Industrial Management, EHS or relevant study, preferred. 5+ years of relevant EHS experience, preferably for retail and distribution/supply chain environments. Principles and techniques of modern EHS management. Knowledge of EHS regulations, and compliance Experience managing Workers' Compensation claims or risk insurance company standards and requirements General knowledge of safety/facility engineering and ergonomics Demonstrates attention to detail, analytical, and problem-solving skills. Demonstrates effective oral, written, and interpersonal communication skills. Ability to present data in a logical, concise manner. Ability to work independently in a dynamic environment. Ability to manage priorities and workflow. Ability to partner strategically with all levels of leadership and influence outcomes. Deeply curious, with a consultative approach, and strong listening and diagnostic skills. High professional standards for customer service, confidentiality, and quality of work. Ability to travel 50% or more. Benefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs for management; auto/home insurance discounts; tuition reimbursement; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information. In addition to our open door policy and supportive work environment, we also strive to provide a competitive salary and benefits package. TJX considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status, or based on any individual's status in any group or class protected by applicable federal, state, or local law. TJX also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. This position has a starting salary range of $92,900.00 to $118,500.00 per year. Actual starting pay is determined by a number of factors, including relevant skills, qualifications, and experience. This position is eligible for an annual incentive as well as long-term incentives.

In order to be considered for this role, after clicking "Apply Now" above and being redirected, you must fully complete the application process on the follow-up screen. As a Public Safety Supervisor at the Miami Beach Convention Center, you will lead a dedicated team ensuring the safety and security of our guests, employees, and partners. You'll oversee and support the security team on your shift, making sure all personnel are fulfilling their critical duties. From patrolling our expansive property and parking lots to securing entry points, you'll be at the forefront of safeguarding every corner of the facility. This role plays a vital part in maintaining order and protection during the dynamic move-in/out of trade shows, conventions, and major events, working hands-on and through your team to create a safe and secure environment for all. This role pays an hourly rate of $17.00-$18.90 Benefits for Full-Time roles: Health, Dental and Vision Insurance, 401(k) Savings Plan, 401(k) matching, and Paid Time Off (vacation days, sick days, and 11 holidays) This position will remain open until April 10, 2026. Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct Shift Briefings: Lead shift briefings with staff to provide essential information about upcoming events, report any incidents, and discuss other relevant activities. Ensure that all team members are informed and prepared to effectively carry out their duties. Review Department Rover Checklists and Command Center Log to Address Issues: Examine Department Rover checklists and the command center log to promptly communicate any violations or potential safety concerns to the appropriate departments. Follow up to ensure that all identified issues are corrected to maintain a safe and compliant environment. Review Event Specifications and Ensure Task Completion: Thoroughly examine event specifications and ensure that all assigned tasks are completed accurately and on time. Coordinate with relevant teams to confirm that event requirements are met, and everything is in place for a successful event. Manage Building Access Key Cards: Work with the Director and Manager to oversee the issuance, distribution, and tracking of all building access key cards. Ensure that only authorized individuals receive key cards and maintain accurate records to control and monitor access to the building. Maintain and Control Building Access: Oversee and regulate access points to the building, ensuring that attendees, show promoters, contract partners, building contractors, exhibitors during move-in/move-out, and employees are authorized and properly monitored. Implement access control measures to maintain security and manage the flow of people entering and exiting the premises. Maintain and Inventory Security Equipment: Ensure that all security equipment is properly maintained and accounted for. Conduct regular inspections to verify that all equipment is functioning correctly. Report any irregularities, malfunctions, or shortages immediately to ensure the security system's integrity. Provide Customer Service: Deliver high-quality customer service to the public, clients, contractors, and staff. Ensure that all interactions are handled professionally, addressing inquiries, concerns, and requests promptly and efficiently. Ensure the Safety of Individuals and Property: Safeguard the well-being of all individuals and the security of property on the premises. Implement and enforce safety protocols to prevent accidents, theft, or any other threats, ensuring a secure environment at all times. Manage Unruly Individuals: Handle situations involving unruly or disruptive individuals with professionalism and composure. Use appropriate conflict resolution techniques to de-escalate situations while ensuring the safety of all parties involved. Complete Incident Reports: Gather relevant information regarding incidents, write a detailed report or summary of the situation, and submit the completed report to the Manager. Ensure that all pertinent details are accurately documented to support effective review and resolution. Understand and Be Knowledgeable About Fire Safety Systems: Possess comprehensive knowledge of the life safety fire alarm system. Be proficient in identifying and interpreting information on the fire alarm panel and fire station computer. Effectively communicate relevant details to all departments and coordinate with the Fire Department as needed. Report Issues to Public Safety Management: Communicate any issues or concerns to the Public Safety Manager and the Director of Public Safety & Transportation. Ensure that relevant information is conveyed promptly and accurately to facilitate effective decision-making and resolution. Participate in Meetings and Training: Attend scheduled meetings and training sessions, and obtain necessary certifications to ensure that knowledge and skills remain current and relevant to industry standards. Stay informed about the latest developments and best practices in the field. Perform Other Duties as Assigned: Execute additional tasks or responsibilities as delegated by the Manager or Director of Public Safety & Transportation. Adapt to various needs and support the team in achieving departmental goals. First responders: Collaborate with local law enforcement during emergencies or as needed to address the specific security needs of the facility. SUPERVISORY RESPONSIBILITIES: Step into a leadership role as a first-line supervisor, directly overseeing the dedicated team in the Public Safety Department. Lead by example while executing supervisory responsibilities in full compliance with Spectra's policies and applicable laws. Take charge of resolving issues, addressing concerns, and ensuring that staff performance not only meets but exceeds organizational standards Qualifications QUALIFICATIONS: To perform this job successfully, an individual must be able to satisfactorily carry out each essential duty. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE: High School diploma or G.E.D.; some college preferred. At least three years in the security field required. Minimum of one year of supervisory experience in security field required. Security experience in a public assembly facility highly desirable. SKILLS AND ABILITIES: Proficient in all phases of Security Control Systems and security related investigations; to include fire safety procedures, bomb threats and evacuation in the event of an emergency. Is knowledgeable of the duties and the responsibilities of security operations. Pass background check and ability to qualify under existing State security licensing guidelines. Demonstrated the ability to work with minimal supervision. Demonstrate strong customer service skills. Good written, verbal and interpersonal skills are required; also possess the ability to interact with all levels of staff including management. Ability to work irregular hours including, morning, night and overnight shifts, overtime hours (as needed), weekends and holidays. Exemplifies a professional demeanor, polished appearance, and a strong work ethic. COMPUTER SKILLS: To perform this job successfully, the incumbent must possess computer skills; proficiency in Microsoft Office and Outlook is preferred; as well as familiarity with office equipment. CERTIFICATES, LICENSES, REGISTRATIONS: Florida Class D license required. Valid driver's license required. PHYSICAL DEMANDS: These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the Public Safety Supervisor position. Reasonable accommodation can be made to enable people with disabilities to perform the described essential functions of the Public Safety Supervisor position. While performing the duties of the Public Safety Supervisor, the employee must be able to communicate effectively, both verbally and in writing. The role frequently involves sitting, using hands and fingers to handle or feel objects, and requires frequent standing, walking, reaching with arms and hands. The position may also involve climbing, balancing, stooping, kneeling, crouching, or crawling as necessary to fulfill job responsibilities. Specific vision abilities required include close vision, necessary for monitoring surveillance systems and reading detailed reports. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will require a considerable amount of walking, climbing, stooping, and possibly heavy lifting. This position requires work in both indoor and outdoor settings, and in inclement weather. It also may be subjected to adverse conditions, including physical contact from hostile individuals. WORKING CONDITIONS: While performing the responsibilities of the Public Safety Supervisor, these work environment characteristics are representative of the environment the Public Safety Supervisor will encounter. Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of the Public Safety Supervisor Job. The Public Safety Supervisor works in indoor and outdoor work settings with mild to adverse exposure to environmental hazards. The incumbent must be able to climb stairs and ladders and walk long distances to access all areas of the facility. The noise level in the work environment is usually mild to loud. This job description is intended to outline the general nature and level of work being performed; it is not intended to be an exhaustive list of all responsibilities, duties, and skills required for the position. The duties and responsibilities may be modified at any time based on business needs or at the company's discretion, with or without prior notice.

Ensure training is performed consistently and is conducive to learning. Perform ad hoc station training as needed. Serve as liaison with insurance company on both pre- and post-loss control in absence of Regional Safety Manager. Maintain information Training, Coordinator, Safety Manager, Security, High School, Manufacturing, Airline, Safety

We are conducting a confidential search for an Environmental, Health, & Safety (EHS) Manager with a company that is a global supplier of industrial components to the building products, packaging, and construction markets. This is a direct-hire position and it is based around Franklin, GA. Key responsibilities will include: Developing and maintaining a variety of safety and environmental programs, policies and procedures that will ensure all associates are in compliance with local, state, and federal rules and regulations, including OSHA and EPA standards. Developing and implementing a program to reduce occupational injuries and illnesses, including area assessments, injury investigations and clear, measurable goals. Correcting working conditions, using knowledge of industrial processes, mechanics, chemistry, psychology, and safety standards, develops loss control programs, and devises methods to evaluate safety progresses. Assessing share, and leverage HSE best practices across sites. Establishing, implementing, and maintaining all Environmental and Safety Management systems in accordance with ISO 14001/ISO 18001, reporting to top management on performance, and recommend improvements. Serving as the interface between local, state, and federal regulatory agencies, corporate and any insurance carrier representatives in order to ensure plant compliance. This is a high-profile position, offering an excellent opportunity for continued advancement. Candidates should possess the following qualifications: * Bachelors degree preferred * 3+ years experience as an EHS Manager and/or EHS Specialist in a manufacturing environment * Experience with compliance reporting * Strong safety mindset

The Sustainability Fleet Safety Coordinator is responsible for assisting both ES & IS branches in tracking all fleet and safety related dashboards and compliance reports. The Fleet Safety Coordinator is responsible for creating and maintaining a safe Fleet, Coordinator, Safety, Manufacturing, Construction, Compliance

On the heels of achieving 3X growth, Virginia Transformer is hiring to do it again! We're strategically building our team for the next 3X growth cycle - a phase that is both intense and incredibly rewarding. We're highly selective about who joins us, because this journey isn't for everyone. If you have the drive, grit, and expertise to perform at a high level - and you want to grow your career 3X alongside the Company's growth - we'd love to talk. Apply below and let's start the conversation. Who We Are Virginia Transformer is the largest U.S.-owned producer of power transformers in North America, and we've been able to grow the past 50-plus years through an unwavering focus on delivering for our customers. We're more than 5,400 people strong and are known throughout the industry for being an engineering company that makes premium quality transformers in the shortest lead times. As a privately held, organically growing company, we thrive on nimbleness, innovation, and tenacity. Join Our Team If you love the thrill of securing the U.S. electric grid, enabling all manufacturing in the country, and the energy of a fast-moving train - this is the place for you. We train hard, grow together, and lead with purpose. Every transformer we build is custom, every challenge unique, and every team member essential. We're looking for those ready to lead, fueled by commitment, and driven by impact. We are growing so fast that all our available roles are not yet posted, so let us know if you are interested and we will follow-up. Job Title and Job Description (Add for each) Job Title: Construction Site Safety Engineer Level: Mid-Level Department: Construction & Expansion / Capital Projects Reports To: Construction Site Superintendent Location: Active Construction Sites (Multi-Site / Travel Required) Position Summary The Construction Site Safety Engineer is a mid-level, field-focused safety professional responsible for implementing, enforcing, and continuously improving safety performance across Virginia Transformer Corporation (VTC) construction and expansion projects. This role works directly under the Construction Site Superintendent and serves as a certified safety trainer, authorized to deliver safety training to both internal VTC employees and external contractors supporting greenfield and brownfield expansions. The position plays a critical role in embedding a consistent safety culture, ensuring regulatory compliance, and enabling safe, predictable execution of complex industrial construction activities. Key Responsibilities Site Safety Leadership & Compliance Implement and maintain site-specific safety plans aligned with VTC safety standards, OSHA requirements, and AHJ expectations. Ensure daily construction activities comply with OSHA 29 CFR 1926, local codes, and project safety requirements. Partner with the Construction Site Superintendent to integrate safety planning into daily work sequencing and execution. Field Oversight & Hazard Control Perform routine jobsite inspections, audits, and behavioral observations across all trades. Identify, assess, and mitigate hazards associated with excavation, concrete placement, steel erection, crane and rigging operations, electrical work, confined spaces, and work at heights. Track, assign, and verify closure of corrective actions related to safety findings. Training & Workforce Enablement (Certified Trainer) Serve as a certified safety instructor authorized to train VTC employees, contractors, and subcontractors. Deliver new-hire and contractor site safety orientations, including project-specific requirements. Lead OSHA-based training, toolbox talks, safety stand-downs, and targeted risk-based training sessions. Support standardization of safety training content across VTC expansion projects. Incident Prevention, Response & Reporting Lead or support incident, near-miss, and hazard investigations, including root cause analysis and corrective action development. Maintain accurate documentation of training records, permits, inspections, incidents, and safety metrics. Prepare regular safety performance reports for the Superintendent, Project Management, and Corporate EH&S. Contractor Coordination & Authority Act as the primary field safety liaison between the Construction Site Superintendent, contractors, and VTC leadership. Review and approve contractor Job Hazard Analyses (JHAs), lift plans, and method statements prior to work execution. Exercise stop-work authority when unsafe conditions or behaviors are observed. Qualifications Required Bachelor's degree in Safety Engineering, Construction Management, Engineering, or related field, or equivalent experience. 5-8 years of safety experience supporting industrial or large-scale construction projects. Demonstrated experience enforcing OSHA construction standards (29 CFR 1926) in multi-trade environments. Certified or authorized safety trainer with experience training both internal employees and external contractors. Strong written and verbal communication skills with the ability to influence field behavior. Preferred OSHA 500 (Authorized Outreach Trainer - Construction) or OSHA 510 certification. CHST, ASP, or CSP certification (or actively pursuing). Experience supporting heavy manufacturing, transformer, or industrial facility expansions. Familiarity with crane safety, critical lifts, rigging plans, and heavy material handling. Physical & Work Requirements Regular presence on active construction sites with exposure to industrial conditions. Ability to climb ladders, access elevated platforms, and walk uneven terrain. Willingness to travel between VTC expansion sites as required. Key Competencies Field-based hazard recognition and risk mitigation Training facilitation and adult learning Authority with approachability Strong documentation and follow-through Proactive safety leadership mindset

We're expanding globally and seeking passionate, innovative professionals to join our journey. If you're ready to be at the forefront of cutting-edge technology and help make AV services safer, more efficient, and accessible, we want to hear from you! About The Role As the Safety and Compliance Officer, one will work closely with other members of the autonomous driving validation operations to institute a culture of safety and compliance, supported by a robust strategy, systems and processes for ensuring the highest levels of safety and compliance across our Operations. These will at all times support and be aligned with the Gold Standards at Safety and processes of our partner organisation. Breathin the best in class safety practices, methodologies, automation and simplification to make it work on the ground providing best experience to the employees and communities where we drive Key Expectations from the Role Establishing a strategy and protocols to ensure compliance with DOT, Non DOT regulatory and partner safety and compliance standards and mitigate operational risks. Evaluate the current processes, practices and identify the risks and opportunities to transform into best in class Collaborate with multi-functional teams to establish and maintain QMS, ISO, EHS quality assurance processes, including regular audits, inspections, and assessments to identify potential safety hazards and implement corrective actions. Define the processes, make them measurable and establish qualitative and quantitative outcomes Serve as a safety advocate within the organization, fostering a culture of safety awareness and accountability among employees and stakeholders through training, communication, and continuous improvement initiatives. Conduct analysis of safety data and performance metrics to identify trends, patterns, and areas for improvement, and develop strategies to enhance safety outcomes and reduce incidents. Focus on the emerging trends, technologies, and regulatory changes in the market, and overlay them onto the Operations safety landscape, and provide strategic guidance and recommendations to senior management to ensure compliance and maintain a competitive edge. Be a liaison with regulatory agencies, industry associations, and other internal & external stakeholders to represent the company's interests and influence policy development and industry standards related to transportation safety. Develop and oversee a comprehensive safety governance framework for operations, encompassing policies, procedures, and protocols to ensure compliance. Engage and lead the safety governance forums Preferred qualifications 10+ years of experience in transportation safety management or a similar role. Bachelors in Engineering / Technology preferably Mechanical engineering. Deep understanding of safety regulations, standards, and best practices applicable to Autonomous vehicle transportation operations Certified Safety Professional (CSP) or equivalent safety certification. Exposure to Sword of Honor is most preferred Experience as Internal Auditor / Certification on ISO 9001 QMS and ISO 14001 EHS Excellent verbal and written communication skills with the ability to simplify complex concepts and present at all levels within the organisation Outstanding leadership / organisational skills with a track record of managing complex functional interactions Ability to scale-up the processes, standardize across multiple sites Right to work in the United States of America. This role will report to the national core operational leader, while closely working with several functional heads of the project.

The Safety Specialist is responsible for ensuring Chemence remains in full compliance with all applicable environmental, health, and safety regulations. This role oversees the development, implementation, and maintenance of safety programs, compliance plans, and training initiatives to promote a safe and compliant workplace. Key Duties and Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Participate in the investigation of incidents, near misses and property damage incidents. Ensure follow-up is done to minimize future exposure and proper records/documents are maintained. Conduct, coordinate and track various training to support company programs. Conduct routine safety observations to ensure compliance with regulatory agencies, company environmental, health, and safety policies, procedures and practices. Maintain internal and regulatory reporting including data collection and reporting including but not limited to air, storm water and surface water discharge. Ensure the company meets all its legislative compliance obligations with OSHA (CAL/OSHA), EPA, AQMD, ADA and fire codes. Serve as primary contact for all regulatory agencies for inspections, permitting, reporting (air, water, waste)/ Maintain compliance with permits, government regulations and other industry practices. Keep abreast of any safety and environmental law or regulation changes that impact the organization. Qualifications, Education and/or Experience Required: Must pass a respirator fit test and online medical exam in accordance with OSHA regulations; compliance is required prior to employment and as a condition of continued assignment. Ability to take necessary steps to ensure a safe work environment for all employees. Participate in manufacturing meetings to discuss workplace safety and regulatory concerns and opportunities. Actively role model all company environmental, health and safety standards. Establish and maintain effective relationships with Operations, Managers, Supervisors, and employees. Keep the Operations Manager and Human Resources Manager up to date on matters relating to environmental, health and safety. Assist in the oversight of the Worker's Compensation program. Responsible for the SD's both maintenance and creation. Special projects as required. 2-5 years' experience in manufacturing environment with responsibility for Environmental, Health and Safety Proficient with Microsoft Office products Ability to be on call or work off hours as needed Experience working with local regulatory agencies preferred Core Competencies Safety Orientation Active and Formal Communication Problem Solving and Decision Making SDS's Technical Knowledge Initiative and Influence Secondary Responsibilities/Duties Ability to take necessary steps to ensure a safe work environment for all employees. Participate in manufacturing meetings to discuss workplace safety and regulatory concerns and opportunities. Actively role model all company environmental, health and safety standards. Establish and maintain effective relationships with Operations, Managers, Supervisors, and employees. Keep the Operations Manager and Human Resources Manager up to date on matters relating to environmental, health and safety. Assist in the oversight of the Worker's Compensation program. Responsible for the SD's both maintenance and creation. Special projects as required. Language Skills: English required, bilingual (Spanish) a plus. Reasonable accommodations can be made, up to and including translation services. Physical Demands: The environmental conditions for this job range from climate controlled indoor activity to inclement outdoor extremes of cold, heat, wind, and various form of precipitation. The widest variance of noise also encountered. This job requires the ability to be on your feet walking around the facility, indoors and out, at least 30% of the day. Additional requirements include climbing ladders/stairs and lifting as required to perform necessary job tasks. All employees must successfully complete and pass a respirator fit test and online medical exam in compliance with applicable OSHA standards as a condition of employment. This qualification is mandatory for performing essential job functions safely and effectively. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement: CHEMENCE provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Supervise work performed ensuring conformance with specifications and company standards regarding safety and quality Attend management meetings Must maintain courteous and effective working relationships with clients, vendors and/or any other representatives of external organizations. Job Requirements: High energy level and enthusiasm; Strong level of discretion, professionalism and attention to detail; Excellent communication skills - both oral and written; Strong organization and problem-solving skills; Excellent computer skills in all Microsoft Office based programs; Ability to handle confidential information; Sense of urgency & ability to meet deadlines (self-directed) Qualifications: Minimum of 2 to 10 years of experience on large scale construction projects. OSHA 30 safety training

Project Safety Advisor Company: Intuitive Safety Solutions (ISS) Duration: 6 months - 1 year Work Schedule: 6 days/week, 12-hour shifts Mobilization: Personal vehicle required Per Diem: Available for travelers Role Summary The Construction Safety Specialist will support a complex, high-hazard industrial construction environment. This role requires a field-forward safety professional who is technically strong, execution-oriented, and thrives in fast-moving, engineering-driven settings. This is not a policy-only, “office-based” safety job - the ideal candidate has real, heavy construction field experience and can influence safety through leadership on the deckplates. Primary Responsibilities • Lead field-based safety activities within an active multi-level industrial construction site • Conduct daily site walks and hazard recognition activities (steel, civil, rigging, excavation, etc.) • Support JHA/JSA reviews and field verification of work controls • Provide field safety coaching to trades and craft - not just compliance auditing • Identify and correct hazards in real time within high-change environments • Support incident investigations, root cause analysis, and corrective actions • Ensure applicable OSHA 1926 compliance and safe work planning for critical lifts, hot work, confined space, and energized system work • Maintain strong working partnerships with construction management, field engineering, vendors, and trades Required Competencies / Skills / Knowledge • 5-10 years of construction safety experience in refinery, structural steel, heavy civil, and/or industrial build-out environments • Demonstrated field presence - credible walking complex industrial jobsites day one • Able to remain composed and confident when pressured technically or operationally (interviews for this role will pressure test this) • Strong working knowledge of OSHA 1926 standards and field application of those standards • Capable of physically accessing multi-level structures - climbing stairs/elevated areas is required • Clear, direct communicator - confident but not arrogant or defensive • OSHA 30 minimum Preferred / Nice-To-Have • CHST, CSP, CIH or progress toward certification • Experience in highly engineered, aerospace-adjacent, or advanced industrial project settings • Advanced technical exposure to cranes/rigging, elevated work, excavation, LOTO, high-hazard operations • Experience that includes both field execution + program/administrative understanding (but field strength is weighted heavier) Note: Individuals whose experience is primarily owner-operator corporate oversight (policy writing, auditing programs at a distance) generally do not perform well in this environment unless they also have meaningful, boots-on-the-ground construction safety experience. Physical Requirements • Ability to stand/walk outdoors for extended periods • Ability to navigate stairs, ladders, uneven working surfaces, and elevated structures • Ability to work in heat, cold, humidity, wind, and active heavy construction conditions Our positions are “safety-sensitive,” and drug testing is a requirement for employment.

Insight Global is seeking a Triple Hat (Quality Control/Quality Analysis/Safety) to support a client around Pensacola, Florida. This role would support construction projects around $20 million. The Triple Hat (Quality Control/Quality Analysis/Safety) should be comfortable working 50/50 both the field and office setting. This is a dynamic and critical role responsible for ensuring the optimal functioning of Federal construction projects; ensuring projects are completed to the highest standards, meeting regulatory requirements and client expectations. · Establish and maintain quality control procedures and standards for the project. · Inspect and review projects; monitor compliance with building and safety codes, and ensure that all materials and workmanship meet project specifications · Perform tests to detect discrepancies and ensure quality · Investigate Issues: Troubleshoot any reported issues with the quality of work and materials · Oversee the training and management of quality control personnel Ensure proper documentation of all quality control efforts and maintain project records REQUIRED SKILLS AND EXPERIENCE • Bachelor's degree in Engineering or Construction Management degree and 5 years of Experience OR 10 years of Construction Quality Management experience • Experience in the Federal Construction space (EM385) • Experience with submittal reviews, commissioning and MEP acceptance, and document reviews • Ability to manage a punch list process, rework and testing and inspections. Experience managing large construction projects ($20 million projects) NICE TO HAVE SKILLS AND EXPERIENCE Comfortable working in the field and in an office setting

Proximiti Safety Group is a nationwide safety management and staffing consultant provider. We are currently seeking Safety Consultants for long-term and short-term projects in multiple regions in the United States. The Safety Consultant will be responsible for identifying issues regarding safety matters at the project site and ensure compliance with Federal, State, Local and owner safety requirements. Successful candidate should demonstrate the following: Applicant should have excellent teamwork and communication skills with the ability to communicate in speech and writing with members at all levels throughout an organization; strong writing skills with the ability to interpret safety standards; excellent interpersonal skills with the ability to interface with diverse personalities. Demonstrated ability to work independently, prioritize work load, and display a high-level of organizational skills. Job Requirements: · 2+ years construction safety experience · OSHA 30 Construction minimum · STS-C or CHST preferred · First Aid and CPR · Able to pass drug test & background check · Available to start ASAP Physical Requirements: The physical demands described here are representative of those that must be met by a consultant to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, consultants are frequently required to stand, walk, sit, climb, use hands and arms, reach, and talk or hear. They are regularly required to stoop, kneel, or crouch. They must frequently lift and/or move up to 25 pounds, and occasionally lift or move up to 75 pounds. Specific vision abilities include accurate near and distant vision.