Shipping clerk jobs in Greendale, WI - 617 jobs

Under the direction of the Shipping and Receiving Supervisor, the Shipping and Receiving Clerk is responsible for printing and shipping orders and receiving incoming goods. As well, this position receives returned goods. The Shipping and Receiving Clerk will also be responsible for all verification of production counts and assisting with annual inventory. They will also lead the monitoring of inventory. This will be achieved by maintaining HellermannTyton's Quality and EMS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Print orders several times a day from the ERP system. Pick, pack, and ship out orders using approved appropriate carriers. Assure all expedited shipments (1 day, 2 day) shipments are made on time, and if problems CSR is notified. Assure all customer-required labeling, etc., is met on shipments being made to customers. Assure all the required documentation is completed for all outgoing shipments Complete all functions required for receiving incoming product within 24 hours. Process RGAs. Perform inventory transactions on the ERP system. Ship sample orders. Create manual shipments, pack, and ship as instructed. Assist in maintaining accurate inventory counts of the supplies used on the manufacturing floor Assure all incoming bag and cartons are put into appropriate storage locations Other Functions Back up other shipping clerks as needed Attend and successfully complete forklift training. Perform routine housekeeping and keep work areas in order. Perform inventory cycle counts as requested. Assist in bi-annual physical inventory duties. Perform all duties assigned for Health and Safety Inspections. Review Negative and Bin reports, investigate and fix inventory problems. Assist QA in identifying and locating non-conforming packaging supplies Perform other tasks as assigned Move product/supplies as needed for QA and Packaging Dept Key Competencies Ability to use ERP system and shipping systems to properly make shipments, including international shipments Ability to do all the functions involved in receiving product, including the use of the ERP system to properly receive and reverse receipt of incoming goods. Ability to use the ERP system to do appropriate inventory transactions. Ability to properly fill out non-conformance tickets as needed. Ability to process RGAs Ability to communicate with our carriers to ensure our shipments get to our customers as required. Required Personal Protective Equipment. Ear, eye & foot protection. The department manager/supervisor will cover additional PPE as required on department-specific work instructions. All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE). Wearing your Personal Protective Equipment (PPE) is a condition of employment. Responsible for the cycle count program, including entering daily and monthly cycle counts Responsible for the organization of the warehouse and making sure FIFO is in place by using date codes Very detail-oriented with numbers and basic math skills to assure production counts are accurate Able to work with little daily supervisor instruction. (Self-directed worker) Qualifications (skills, knowledge, experience) High school diploma or equivalent required. Ability to lift/push/pull up to 50 lbs. Basic math skills. Computer skills preferred. Forklift experience preferred. Valid Wisconsin Drivers License preferred. Ability to work overtime and on weekends when properly notified to meet the needs of the customer. The ability to drive, along with a valid driver's license with an acceptable driving record, is preferred. Minimum 1 year of experience in inventory control or 1 year of clerical experience in a manufacturing environment. Ability to read/write in English. Good oral and written communication skills. #LI-Onsite #LI-MS1 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Earn Extra Cash While Working From Home Make extra cash with this list of side gigs-part-time, passive income, and flexible options! Your Next Side Hustle Start Earning Today!

The Purchasing and Inventory Associate supports all procurement and inventory functions within our organization. This role is responsible for bulk and on demand purchasing, maintains accurate par levels, forecasts supply needs based on upcoming events, develops and maintains vendor relationships, and ensures inventory accuracy across multiple locations. Reporting to the Sr. Manager, Logistics and Facilities, this role is integral to product development, warehouse and logistical operations, and equipment management for all lines of business. COMPENSATION & BENEFITS: This position offers a competitive compensation range of $55,000-$65,000 annually, based on relevant skills, experience, and qualifications. In addition, we offer a comprehensive benefits package that includes medical, dental, vision, life insurance, short- and long-term disability coverage, a 401(k) retirement plan, participation in a bonus program, and eligibility for employee stock ownership (ESOP). POSITION DUTIES AND RESPONSIBILITIES: Purchasing and Procurement Performs bulk and on demand purchasing for food, beverage, equipment, and consumables. Generate purchase orders, track fulfillment, and ensure timely delivery. Maintain and adjust par levels based on seasonal trends, forecasted event volume, and historical data. Maintain product pricing and provide periodic product cost analysis reports. Coordinate closely with Operations, Warehouse, and event teams to ensure supply availability. Cross departmental collaboration with product development team and service execution team on product selection. Inventory Management Monitor inventory levels daily and reconcile discrepancies. Track receiving processes and ensure all items are accurately documented. Conduct scheduled cycle counts and maintain inventory accuracy standards. Support asset tracking for equipment using company tools. Vendor Management Develop and maintain strong vendor partnerships. Create and manage vendor scorecards for pricing, quality, performance, and delivery metrics. Participate in the pricing and contracts negotiations with suppliers. Track vendor performance, pricing changes, product catalogs, and contract terms. Analytics and Reporting Produce purchasing and inventory reports using Excel and company systems. Forecast supply needs using historical trends, event projections, and seasonal patterns. Data management includes normalization, data cleansing, transformation, validation, and data governance. QUALIFICATIONS: · 5 + years of purchasing or procurement experience. · 2+ years' experience within food & beverage, catering, restaurant or a related business. · Intermediate or higher knowledge of excel including tables, formulas, functions, formatting, presentation, analysis, and reporting. · A bachelor's degree or equivalent experience · Possesses strong computer skills with demonstrated proficiency in standard business software packages and productivity tools. (e.g., Microsoft Office, Asana or Slack, cloud data storage). · Experience with warehouse/asset management/purchasing tools such as Asset Panda and CRM software such as FreshSales. · Strong interpersonal, analytical, and critical thinking skills. · Ability to communicate effectively, verbally, and in writing. · A positive attitude, willingness to learn from others, and ability to work in a team-oriented environment. · Strong organizational skills, ability to prioritize tasks, and proactively meet tight deadlines. · Ability to travel to tradeshow events 2-4 times a year.

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Inventory Control Specialist to join their team. You'll play a critical part in ensuring inventory accuracy, supporting production needs, and driving process improvements. If you're a proactive professional with strong ERP experience and a knack for creating structure, this role offers the chance to make a real impact. Key Responsibilities: Oversee and execute all inventory-related activities across two operational sites. Maintain accurate inventory records in ERP systems (Epicor experience highly preferred). Reconcile physical inventory with system data; research and resolve discrepancies promptly. Collaborate with production teams to ensure adequate stock levels without overstocking. Develop and implement Standard Operating Procedures (SOPs) for inventory control. Prepare detailed inventory reports and recommend replenishment strategies. Partner with logistics, purchasing, and operations to optimize inventory flow and support demand forecasting. Qualifications and Skills Bachelor's Degree is highly preferred. 2+ years of experience in inventory or warehouse operations. Proven ability to work across multiple locations and build trust with diverse teams. Strong ERP knowledge: Epicor experience is preferred. Excellent communication skills-both written and verbal. Highly organized, detail-oriented, and capable of multitasking in a fast-paced setting. Ability to handle inventory in a warehouse environment. A proactive, “roll-up-your-sleeves” attitude with a willingness to jump in wherever needed. A self-starter who thrives on solving problems and improving processes. Someone who values collaboration and can communicate effectively with all levels of the organization. A professional who understands the balance between maintaining sufficient stock and avoiding excess inventory. Compensation Range: $55,000 - $70,000 Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance. If you are a passionate Inventory Control Specialist looking for a new and rewarding career, please apply today! You don't want to miss out on this opportunity! LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit **************************************

Shift 1 (United States of America) Coperion is currently seeking a Shipping & Receiving Clerk to support our location in Whitewater, WI. This position supports the activities of the Receiving and Shipping department by unloading trucks, inspecting, signing and updating the computer system for received goods. Custom builds or prepares packaging for secure and safe shipment of products. Shipper generates bill of lading, packing lists on orders, arranges trucking services and maintains database. Schedule: 1st shift Monday - Friday 6:30am - 3pm Responsibilities: · Unload trucks using forklift and/or overhead crane · Inspection of received goods for quality and quantity · Prepare and package materials in prefabricated cartons, custom built wooden crates, and/or skids and pallets · Generate packing list for shipment · Arrange truck services and UPS shipments · Support our lean manufacturing process with 5S · Adhere to ISO 9001 company standards, work instructions and procedures Required Education/Experience/Skills: · High School Diploma or equivalent with 6 months to a year of shipping and receiving knowledge · Effective computer skills · Forklift certification a plus · Detail oriented, effective organization and planning · Ability to time manage to meet deadlines · Use judgement and independent thinking · Dependability a must · Previous constructions skills an added bonus Benefits: Our benefit package includes medical, dental, and vision plans, vacation/sick pay, life insurance, short & long-term disability, paid parental leave and 401k retirement plan. #LI-AS1 Who we are: Coperion is an industry leader in compounding and extrusion, feeding and weighing, bulk material handling and service, bringing a wealth of know-how and experience to the market. Customers benefit from Coperion's divisions of Polymer, Equipment & Systems, and Service that are optimally networked on a global basis to offer ultimate support in the design, manufacturing and implementation of ideal systems. Staffed by engineers, chemists, technicians and a variety of industry experts, these Divisions form a powerhouse of process solutions for their customers. Coperion is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose - Shape What Matters For Tomorrow™ - we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: ******************** EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Systems, LLC, an affiliate of Chamberlain Group, is a U.S.-based manufacturer of loading dock equipment-marketed under the Poweramp, DLM, and McGuire brands. With manufacturing facilities in Germantown, Wisconsin and Malvern, Arkansas, all products are designed and produced in the USA using lean manufacturing techniques. We strive to recruit the best talent in the industry and give employees opportunities for continuing education and training to help them advance in their careers. Sign On Bonus - $1500! Essential Duties and Responsibilities: Drive forklift and maintain necessary certification Ensure completion of all shipping documents including: bill of ladings, packing slips, shipping labels, Export documents, processing of shipments through ERP system, and other related processes Determine the most economical modes of transportation such as LTL, volume LTL, truckload, partial truckload; maximize shipping efficiency through consolidation of shipments Work with Customer Service department to resolve late orders, shortages, expedited requests, claims for freight damage, and freight estimates; resolve shipping delays due to customer requests Ensure accuracy and completeness of all shipments by working with manufacturing when shortages or discrepancies are discovered Maintain accurate and updated database of shipping weights Comply with health and safety guidelines and rules; managers should also ensure compliance across their teams Protect Chamberlain Group's and Systems' reputation by keeping information confidential Maintain professional and technical knowledge by attending educational workshops, reading professional publications, establishing personal networks, and participating in professional societies Contribute to the team effort by accomplishing related results and participating on projects as needed Minimum Qualifications: No minimum education required 2+ years forklift experience Ability to use basic computer software such as spreadsheets, databases, word processing applications, email, Internet, etc. Solid verbal and written communication Preferred Qualifications: Previous experience in the transportation industry The pay range for this position is $19.04 - $29.06/hr. Base pay offered may vary depending on a number of factors including, but not limited to, the position offered, location, education, training, and/or experience. In addition to base pay, also offered is a comprehensive benefits package and 401k contribution (all benefits are subject to eligibility requirements). This position is eligible for participation in a short-term incentive plan subject to the terms of the applicable plans and policies. Chamberlain Group wants all of its employees to succeed and encourages people of all backgrounds to apply. We're proud to be an Equal Opportunity Employer, and you'll be considered for this role regardless of race, color, religion, sex, national origin, age, sexual orientation, ancestry; marital, disabled or veteran status. We're committed to fostering an environment where people of all lived experiences feel welcome. Persons with disabilities who anticipate needing accommodations for any part of the application process may contact, in confidence **************************. NOTE: Staffing agencies, headhunters, recruiters, and/or placement agencies, please do not contact our hiring managers directly.

**Successful hires for the Shipper/Assembler position will receive a $1,000 sign on bonus after 90 days of employment!** Job Summary: Responsible for shipping and assembling all Jointmaster products. Also material handling as needed. Primary Duties: Assemble all products in the product line efficiently with high quality Accurately pick and pack product using the bar code system Ability to ship orders using the manifest, freight and UPS Systems Receiving and material handling of product Maintain accurate bar code locations and inventory counts Maintain knowledge of ERP system and uses Assist in training of new employees All other assigned duties Key Responsibilities: Ability to demonstrate the following: Maintain a safe working environment Maintain 6S Maintain a professional and positive attitude Communicate effectively to all other Jointmaster areas Aligned with Inpro's culture Follow company policies and procedures Job Relationship: Reports directly to the Jointmaster Supervisor Works closely with all other Jointmaster areas Job Specifications: High School Diploma or GED required Certified to drive all lift trucks Previous machine shop experience preferred Proficiency with basic math and calculations Ability to read a ruler using Standard and Millimeter measurements Ability to use micrometer, caliper, depth and height gauges Hours Monday - Friday; 7:00am - 3:00pm Benefits Health insurance Dental insurance Generous employer 401k contributions Flexible spending account Tuition reimbursement Generous paid time off Employee assistance program Vision insurance Employee discount Life insurance Referral program

Job DescriptionDescription: The Gund Company has an immediate opening for a full-time Entry Level Composites Shipping and Receiving Associate to join our team! Shift: First (6:30am - 3:00pm M-F) Hourly Wage: $22.00 - $24.00 Plant/Work Location: 809 Philip Drive Waukesha, WI 53186 About The Gund Company The Gund Company, a leader in engineered material solutions, specializes in customized electrical insulation products. With 12 global facilities, we pride ourselves on delivering high-quality products and excellent customer service. We are currently seeking an Entry Level Composites Shipping and Receiving Associate to join our team. Job Summary Composites Shipping and Receiving Associate Implement the Order Fulfillment Process steps related to the preparation of shipments and related documentation to ensure the complete satisfaction of the customer's requirements. Knowledge of various items in stock; ability to select appropriate type and size of container; using appropriate packing material to prevent breakage or damage; closing and sealing containers; applying labels or entering identifying data on container. Use of bar code readers, computer terminals or other electronic devices to track product. Key Responsibilities Composites Shipping and Receiving Associate Prepare product for shipment to the customer by inspecting, labeling and packaging product according to standard procedures. Packaging 4x8, 3x6, and 3x10 material skids. Confirm correct quantity/counts against work order or packing slip. Reconcile raw materials against the packing slip. Storage of raw materials in their designated home locations. Operate forklift. Load and unload trucks. Other duties as assigned. Requirements: Requirements Ability to operate a forklift A High School Diploma/GED OR related experience. Ability to read production or shipping documents. Prior experience in a manufacturing industry is preferred. Work Environment Composites Shipping and Receiving Associate This role is performed in a non-climate-controlled manufacturing environment with exposure to noise, fumes, and chemicals. Personal protective equipment (PPE) is required. The position involves repetitive tasks and manual labor, including lifting, bending, and standing for extended periods of time. Ability to lift up to 40 pounds and perform manual tasks as required. Benefits Paid Time Off (PTO) and Paid Holidays Comprehensive benefits package (Health, Dental, Vision, Life, Disability). 401(k) plan with a 50% employer match. Employee Stock Ownership Plan (ESOP). Ongoing training and development programs. Join a company that values your contribution and invests in your future. Apply today to start your career with The Gund Company! Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions of the Composites Shipping and Receiving Associate position. EEO Statement: It is the policy of The Gund Company to recruit, hire, train, and promote employees without discrimination. Rev: 06122025 RJ

The Shipper works in a fast pace environment preparing items for shipment by performing the following duties: Physically moves bread/bun stacks to shipping dock using two wheel cart to stage product. Repetitive use of upper extremities to break down stacks of product to be sent to depot locations. Physically shuttle bread trays and materials to staging area. Unloads semi-trailers and routes incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages. Loads cased bread/bun products onto pallets. Operates electric pallet jack to move or hoist materials from packaging to shipping dock. Operates stretch wrap bander to palletize bread/bun products for shipment. Performs all computer functions necessary to track various aspects of goods. Efficiently works within a busy dispatch department. Creates shipping labels and handles shipping information. Works well with shipping team to complete orders in a timely manner. Worker must be able to constantly stand and walk on concrete floors and trailer beds. Frequent pushing/pulling of transport racks and bread trays. Frequent bending, stooping, twisting, reaching, lifting, carrying is required. Frequent to constant handling and grasping of bakery product trays, transport racks and boxes. Frequently lift and/or move items up to 50 lbs. Must have reliable transportation and attendance to meet employer's attendance standards for 24/7 production facility. Required qualifications, skills and experience : Worker must be able to constantly stand and walk on concrete floors and trailer beds. Frequent pushing/pulling of transport racks and bread trays. Frequent bending, stooping, twisting, reaching, lifting, carrying is required. Frequent to constant handling and grasping of bakery product trays, transport racks and boxes. Frequently lift and/or move items up to 50 lbs. Must have reliable transportation and attendance to meet employer's attendance standards for 24/7 production facility. About us : Alpha Baking Company, Inc., a national distributor of breads, rolls and buns, as well as sweet goods, was founded in 1979. Headquartered in Chicago, Alpha Baking has three production plants in Illinois and others in Indiana, Michigan, and Wisconsin. Alpha Baking's retail brands include S. Rosen's, MaryAnn, Natural Ovens Bakery, Kreamo, and Golden Hearth, with additional product sold under private label agreements and the Alpha Baking foodservice brand. Our broad array of products can be found in national restaurant chains, quick service restaurants, schools, institutions, major league sports franchises, national grocery chains and independent grocery stores. EEO statement : We are an equal opportunity employer with policies prohibiting unlawful discrimination on the basis of any protected classification under applicable local, state and/or federal laws which include race, color religion, sex, national origin, sexual orientation, gender identity, disability status or veteran status, Alpha Baking Company, Inc. is an Affirmative Action/Equal Employment Opportunity Employer.

Job DescriptionShipping Associate: Harvard, IllinoisOur customer in Harvard, Illinois, is seeking motivated individuals to join their team. We're hiring Shipping Associates to work full-time on 2nd shift. As a Shipping Associate, you will play a key role in keeping products moving efficiently through the warehouse by receiving, organizing, and preparing merchandise for shipment in a fast-paced distribution environment. Responsibilities of the Shipping Associate: Unload, sort, and move merchandise within the warehouse. Pick and prepare orders for shipment using scanners and order systems. Stack, wrap, label, and stage products for outbound shipments. Operate pallet jacks, hand trucks, and other material handling equipment safely. Maintain accurate inventory and shipping records. Follow safety procedures to ensure a clean and organized work area. Shipping Associate Requirements and Qualifications: At least 18 years of age. High school diploma or GED. 1-2 years of warehouse, distribution, or shipping experience preferred. Ability to lift up to 50 lbs consistently. Comfortable standing and walking throughout the shift. Basic math and computer skills. Strong attention to detail and reliability. Willingness to work overtime as needed. Pay for Shipping Associate: $18.60/hour. Shipping Associate Benefits: Temp-to-permanent opportunity. Weekly pay. Opportunity for growth. Medical insurance. 401k. Type: 2nd Shift, Full-time Schedule: Monday - Friday from 12:00pm - 8:00pm, plus overtime as needed.Apply now! Are you ready to move from the worries of today to your dreams of tomorrow? If so, give Hughes a call. We are the top-rated staffing, recruiting, and HR experts in the region. We are headquartered in Freeport, IL and have 11 locations across Illinois, Wisconsin, and Minnesota. Where we have offices, we have connections to the best local jobs! Walk in our doors and you'll find friendly professional staff who dig deep, get results, and most importantly have fun! The reviews speak for themselves, at Hughes we quickly hook you up with companies that offer competitive pay rates, great culture & benefits, and a chance to elevate your life. We offer health insurance and 401(k) too to all our employees. To get the ball rolling, visit us online at www.hughesrecruiting.com and complete our application. We'll be in touch soon!

In the Receiving department you must demonstrate the ability to process timely receipts, inspection, and disposition of items from suppliers. In the Shipping department you must demonstrate the ability to retrieve and prepare customer orders to their standards. The team member will demonstrate a contribution to the growth of a team environment and will be expected to meet all responsibilities listed below in a quality and professional manner. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Remove product from packaging and verify accuracy, security, and condition of product. Receive products into the appropriate Syteline warehouse and location, using proper FIFO inventory storage methods and following all purchase order instructions as needed. Affix all identification labels as per work instructions. Ensure all products identified on the purchase order have been included. Inspect products per the inspection standard to verify acceptability and accuracy. Work with the sourcing/material planning and product engineering team to resolve any purchase order, or part number/revision discrepancies. Unload incoming freight by use of a pallet truck, forklift or by hand. Strive to improve the efficiency and accuracy of existing processes through creative thinking and the help of other groups within the organization. Provide efficient and accurate information to all internal customers. Inspect materials, products, and containers and verify process. Able to cycle count inventoried items. Prioritize and process customer orders and service repair orders per the customer requirements and company commitments. Process small package and truck load shipments. Work with international shipping regulations and procedures. Teamwork: Willingness to be flexible to move to different parts of the shipping/receiving environment or organization to assist areas in need of additional resources. Ability to work well with a diverse group of co-workers, assist in training of other members and promote a strong team effort to ensure timely and efficient completion of customer requirements. Trainer Responsibility: Demonstrate ability to train and mentor new associates on all operations of the material environment. Willingness to become a certified forklift trainer to train new temps/associates at Dedicated Computing. QUALIFICATIONS/EDUCATION and/or EXPERIENCE Required: High School Diploma or GED and one year of related experience or equivalent combination of education, related training and experience. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and to other associates of the organization. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Communicate (via face to face, telephone, and email) daily with shipping vendors. Forklift Operation. Will provide training if necessary. PHYSICAL REQUIREMENTS The physical requirements described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is regularly required to stand; walk; use hands to manipulate objects, tools, or controls; reach with hands and arms; talk and hear. The associate must occasionally lift and/or move up to 35 pounds and occasionally lift and/or move up to 50 pounds with the assistance of others. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. This includes a highly regulated, climate-controlled, low to moderate noise environment. EQUAL EMPLOYMENT OPPORTUNITY All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Responsible for shipping products to customers. Verify and keep records on outgoing products... Prepare items for shipment and arrange for transportation of products. Complete outbound paperwork. Skilled in the use of parcel software. Move product to outbound shipping lanes. ESSENTIAL FUNCTIONS 1. Perform shipping and/or receiving duties. 2. May safely operate forklift. Proceed safely to assigned areas to pull, load, and move material. May assist in unloading trucks. 3. Prior to using forklift must perform operations and safety check. 4. Maintain manual/computerized records and files. Generate shipping/receiving reports and documentation. Proper creation of export paperwork using online tools is required. 5. Process all required paperwork. Complete bills of lading and other required forms with a high level of accuracy. Orders need to be closed in system as required. 6. Able to use parcel computer program to accurately address outbound shipments for pickup for parcel service. 7. Transport material to staging areas, inventory areas and other designated areas. 8. Verify count/weight, and check items ready for shipment against the customer order. Work with Production Control and Customer Service to resolve any discrepancies. 9. Keep adequate supply of shipping materials on hand at all times. 10. Adhere to all Standard Operating Procedures. 11. Work in a safe manner and follow all safety rules and procedures to ensure personal safety as well as safety of others. 12. Keep work area neat and orderly (5s standards). 13. When limited/no work in area, may provide assistance to other departments as needed. 14. Perform other duties as assigned by management. PHYSICAL REQUIREMENTS 1. Lifting up to a maximum of 40 lbs. 2. Frequent bending, stooping and reaching above and below waist. 3. Twisting frequently at waist and shoulder levels. 4. Frequently sitting on powered forklift. 5. Capable of wearing safety glasses with permanent side shields at all times. 6. Capable of wearing steel-toed safety shoes at all times. 7. Capable of wearing other PPE as required. 8. Sufficient visual acuity to read instructions, safely operate equipment (including forklift), and ensure work meets standards. 9. Sufficient manual dexterity to safely operate forklift and properly perform work. KNOWLEDGE/SKILLS/ABILITIES 1. Two years of high school but prefer High School Diploma or GED 2. Some computer skills required; PC and terminal use, and basic data entry skills 3. Ability to operate order picker and narrow aisle lift trucks 4. Ability to perform to verbal instructions, as well as read/write English and interpret documents 5. Ability to use basic math 6. Ability to work with minimal supervision 7. Ability to be responsible with motorized equipment 8. Good eye/hand coordination and good motor skills 9. Satisfactorily pass in-company forklift driver training program and demonstrates in a “road test” safe handling of forklift truck WORKING CONDITIONS Typical manufacturing setting with moveable, mechanical parts and/or equipment. Normal manufacturing shop elements regarding temperatures (no air conditioning so warmer in summer months and cooler in winter months), dust, and noise levels (within required limits). Occasional outside driving during inclement weather. This job description sets forth only the major functions and does not limit the company's right to assign additional tasks or related duties or change such tasks/dutie

ICM Corporation is currently looking for a Part-Time Warehouse Shipping Associate to join our team! What is ICM Corporation? ICM Corporation is a steadily growing e-commerce/catalog-marketing, distribution, and manufacturing company with eight different divisions. We have been in business for more than two decades and are working to continually increase that number! ICM Corporation is located South of Milwaukee, being only 20 minutes away from UW-Milwaukee and 12 minutes away from the American Family Field. What can we offer you? Company sponsored 401k plan Flexible Work Schedule Personal and Professional Growth Strongly Encouraged Cross-Training Requirements Job responsibilities include, but are not limited to the following: Print stock orders. Retrieve products from stock. Forklift unloading and loading of parcels. Inventory cycle counting. Pack products, small packaging. Use ship station software. Weigh and measure products to be shipped. Prepare picking tickets. Take products to be shipped to the dock area. Run a daily shipping report. Qualifications: Computer skills, including good typing, Word, and Excel, in house software Syspro (will train) Experience working with UPS, FedEx Ground, and FedEx Express mailing systems Bilingual is a plus

Bosch Rexroth is one of the world's leading providers of Drive and Control Technologies. Regardless of the motion task that customers face anywhere in the world, they will always find a Bosch Rexroth team with local experience and the appropriate know-how from more than 30 industries and all drive and control technologies. Our associates take on their customers' challenges with passion and persistence until the right solution is found. This is what makes Bosch Rexroth a strong, reliable partner for Mobile Applications, Machinery Applications and Engineering and Factory Automation. As the Drive & Control Company, we develop, produce, and distribute our components and system solutions in over 80 countries. Bosch Rexroth, dba HydraForce, Inc. offers one of the most comprehensive lines of high-quality hydraulic cartridge valves for the mobile and industrial equipment markets. We design and manufacture high performance valves that meet virtually any need encountered in machine design. Our cartridge valves are designed to fit a wide range of industry-common valve cavities. Our employees enjoy a fast-paced and challenging work environment that provides them with daily opportunities to Power Forward their careers. For almost 35 years, Bosch Rexroth, dba HydraForce, Inc. has been producing the most innovative elector-hydraulic control solutions for the mobile machinery and industrial equipment markets. Job Description The Shipping Associate I ensures customer delight in a cross-functional support role within the shipping department. This role is expected to receive valves into the shipping area, pack, close and ship customer orders. Duties and responsibilities The following reflects management's definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons Receive valves from assembly accurately Collect all material for Manifold Assembly Verify material against BOM Match MO's for kit orders Assemble boxes Monitor the accuracy and timeliness of material being packed and shipped to our customers Coordinate shipping documents Ensure Product is properly packed and organized per written and verbal instructions for accurate, and safe delivery Label shipments of products using marking tools Record product, packaging, and order information on specified forms and records Measure, weigh, and count products and materials Examine and inspect shipment, materials, and products to verify packing specifications are met Prep orders for Packers Other duties and responsibilities as assigned This position has no supervisory responsibilities Qualifications Qualifications and Experience HS diploma or Equivalent Excellent written and verbal communication skills in English Strong attention to detail Beginner computer skills Coordinate workflow with other team members Ability to operate material handling machinery such as pallet jacks, electric banders, and skid wrappers Forklift certification preferred Physical Requirements While performing the duties of this job, the employee is frequently required to do the following: Lift and move 50 pounds repetitively Walk and stand for long periods of time Push carts with heavy loads Work Environment Majority of the work time is spent in a manufacturing environment where temperatures are often warm or cool, depending upon the season, and noise level can be moderate to high PPE required as determined by company safety standards: safety glasses, ear plugs, gloves, safety shoes Additional Information Salary and Benefits: The hourly range for the position is $17.00 -$19.00 /hour. The individual pay is determined based on several factors, including, but not limited to, work experience and job knowledge, complexity of the role, job location, etc. The Recruiter can share more details about the specific salary range during the interview process. Your well-being matters to us at Bosch! That's why we offer a total package that goes beyond just a paycheck. Alongside a competitive compensation package, you'll enjoy a suite of benefits designed to empower you in every area of your life! Think of it as our way of investing in your success! This includes: Prioritizing Your Health: Access to high-quality medical, dental, and vision plans; Health Savings Accounts (HSA) and Flexible Spending Accounts to make managing your healthcare easier; plus wellness programs to help you stay healthy and energized. Securing Your Future: We offer a 401(k)-retirement plan with company match, safe harbor contribution into the 401(k) and provide resources to help you confidently plan for retirement. Supporting Your Life: Paid time off to recharge and pursue your passions, and tuition reimbursement to invest in your professional development. Providing Peace of Mind: Access to life insurance and disability coverage to protect you and your loved ones. Must Have: Must have US work authorization. Indefinite U.S work authorized individuals only. Future sponsorship for work authorization is not available. We are an Equal Opportunity Employer including disability/Veterans.

Job DescriptionWaukesha Shift/Hours/Days: Monday through Friday 8:00 AM - 4:00 PM As a Shipping & Receiving Technician your goal is to work with the operations team to ship and receive products in a timely manner and maintain inventory counts for finished goods and raw materials through accurate documentation. You will do this by: Pulling orders, ensuring orders have been pulled, staged, and repacked in the correct quantities and packaging Loading and unloading trucks as required Incoming inspection of materials and subcontracted items Creating and reprinting labels as needed Pulling material from the Machine Shop Completing daily cycle counts Processing chips from the Machine Shop Returning raw materials to inventory from the Machine Shop Packaging finished parts for storage and putting them away in the correct locations Building custom wood boxes for shipment of products to customers Maintaining inventory of lumber for construction of boxes Spending 10 minutes at end of shift to clean and organize shipping/receiving area Other duties as assigned The above statements are intended only to describe the general nature of the job and should not be construed as an all-inclusive list of position responsibilities. Responsibilities and impact may crossover technical fields/functions. Equipment Forklift Computer / Scanner EPICOR system Required Qualifications: High School diploma or equivalent 1-3 years' experience working in a manufacturing environment Good attendance Must be able to use saw, tape measure and nail guns safely to build boxes Ability to use basic math to analyze information and measuring equipment Experience with computer systems Ability to work safely and efficiently Ability to work in a team and independently Strong attention to detail and ability to follow instruction and written processes Preferred Qualifications: Experience working in shipping/receiving position Experience with EPICOR Travel Required: % of Travel: 0% Physical | Visual Demands: Weight amount that would need to be lifted, pushed or pulled: Up to 10 pounds Weight amount that would need to be lifted, pushed or pulled: Up to 25 pounds Weight amount that would need to be lifted, pushed or pulled: Up to 50 pounds Weight amount that would need to be lifted, pushed or pulled: Up to 100 pounds Sit, Stand, Walk Talk/Hear, Use Hands, Climb/Balance, Stoop/Kneel/Croouch or Crawl, Reach with Hands and Arms, Taste/Smell (Percentage of Day = 25%, 50%, 75% or 100%) Close vision (clear vision at 20 inches or less) Distance vision (clear vision at 20 feet or more) Color vision (ability to identify and distinguish colors) Work Environment: Loud (Examples: metal can manufacturing department, large earth moving equipment) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Location: 570 Bluemound Road | Waukesha | WI | 53188 Shift/Hours/Days: Monday through Friday 8:00 AM - 4:00 PM Benefits Package: Health, Dental and Vision Insurance Company Paid Short & Long Term Disability Insurance Company Paid Life, Dependent, and Spouse Insurance Voluntary Life & Critical Illness Insurance Prescription Drug Benefits 401(k) Retirement Savings Plan with discretionary quarterly Employer Match 10 Paid Holidays 12 days Paid Time Off minimum to start FSA & HSA (Health Savings Accounts / Health and/or Dependent Flexible Spending Account) New! One Fisher Barton Bonus Program And…More! Who we are: At Fisher Barton, we combine years of experience across multiple industries to deliver unparalleled innovation. Our world-class talent understands the behavior of materials and develops leading-edge solutions that meet your unique needs. We're more than a source for high-quality parts; Fisher Barton is your resource for the highest quality solutions you'll find-anywhere. Fisher Barton is an equal opportunity employer who welcomes and encourages diversity in our workforce. Qualified applicants will be considered without regard to any status or characteristic protected by law.

Job Summary: As a Shipping Specialist at Reader Precision Solutions, you won't just be handling packages - you'll play a crucial role in ensuring our machined parts reach their destination with precision and efficiency. Your attention to detail, combined with a sense of urgency and logistical coordination, will make you an essential part of our team. Shift Schedule: Monday - Friday: 6:30AM - 3:00PM Essential Duties & Responsibilities include but are not limited to: Verify & maintain records on incoming and outgoing shipments and prepare items for shipment. Compare identifying information including counts, weights, or measurements of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records. Determine method of shipment, utilizing knowledge of shipping procedures, routes, and rates. Apply shipping labels to packed cartons or stencils identifying shipping information on cartons. Insert components/parts into containers, using spacers, fillers, and protective padding. Post weights and shipping charges. Unpack and examine incoming shipments, reject damaged items, record shortages. Properely route items to departments. Examine outgoing shipments to ensure shipments meet specifications. Assist in maintaining inventory of shipping materials and supplies. May operate forklift or use pallet jack to move, convey, or hoist shipments from shipping and receiving platform to storage or work area, or to load or unload delivery vehicle. May receive damaged or defective goods returned to establishment. Examine processes and identify opportunities for continuous improvement. All other projects and tasks as assigned. Skills & Qualifications: A positive attitude and exceptional aptitude for growing your skills Previous experience in a shipping role and forklift certification is desired Excellent verbal and written communication skills A drive for results Ability to multi-task with flexibility to prioritize time-sensitive projects/tasks A collaborative mindset that focuses on teamwork Detail orientation with the ability to accurately follow work instructions Ability and commitment to keeping team members well informed and to draw on others' expertise when required Knowledge of basic mathematics (arithmetic & geometry) Effective decision-making and problem-solving skills Good computer skills and ability to demonstrate proficiency and accuracy in data entry Must be able to lift up to 50 lbs. Vision corrected to 20/20 Physical/Environmental Demands: The characteristics listed below are representative of the physical and environmental demands required by an individual to successfully perform the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Ability to continuously lift 10 lbs, frequently lift up to 25 lbs, occasionally lift 50 lbs. Ability to push/pull up to 200-300 lbs with wheeled pallet jack. Ability to bend and stoop to pick up product. Ability to stretch and reach. Ability to stand/walk for entire shift. Typically, work is performed within a manufacturing environment where the noise level is moderate. Benefits & perks of joining the Reader Precision Solutions team include: RPS team members enjoy a challenging & fast-paced work environment in a high-tech manufacturing facility named one of the TOP WORKPLACES by the Milwaukee Journal Sentinel THREE YEARS IN A ROW (2022, 2023 & 2024) and the 35th Annual Wisconsin Manufacturer of the Year . Our work environment is extremely clean, well lit, organized (5S), & climate-controlled. In addition, our team thrives in a supportive culture that provides engaged leadership, ongoing recognition for performance results, and a great benefits package. Competitive wages (paid weekly on Thursday's) 8% of base pay shift differential (2nd & 3rd shift) Benefits begin the month following 30 days of employment: health insurance with points based, holistic wellness program, dental, life, & disability insurance Partnership with a near site local clinic for FREE health services including primary & preventative care, walk in visits, labs, prescriptions, etc. FREE vision insurance! 401(k) retirement savings plan with up to 4.5% company match (immediately vested!) Vacation accrual starts upon hire - accrue up to 2.5 weeks in first year! 9 paid holidays with up to two discretionary holidays Education assistance up to $5,250 annually (after 12 months of service) Professional development opportunities - internal & external (cross-departmental training, PMPA conferences, IMTS-Chicago, local technical colleges/universities, & more…) Career advancement - ongoing training & mentoring with opportunity to grow your skills Performance bonus - potential to receive a discretionary year-end bonus based on individual and group performance Company paid Short-Term Disability policy Company events - team lunches, summer picnic event, holiday party Company zoo pass to Milwaukee County Zoo Voluntary pet insurance Holistic wellness program - earn up to $700 in incentives through points accumulation for accomplishing a variety of wellness activities. Also offered by the Company are employer paid onsite flu shots, biometric screenings, free health coaching & MUCH more! Employer paid life insurance - $50,000 policy with options for voluntary life up to $400,000 benefit maximum Financial planning resources & onsite financial wellness workshops Employer subsidized work shoes & safety glasses program Reader Precision Solutions branded attire - $100 annual allowance Employee Referral bonus - $1,000 Satisfying work…leaving work at the end of the day knowing that the GREAT work you do is meaningful and appreciated by the Company, our clients, and end users who benefit from the high-quality components we manufacture for them! With the right mix of drive, commitment to excellence, & consistent performance, you will have the opportunity to further develop your skills in different areas with increasing responsibilities & rewards! Reader Precision Solutions Four Pillars: Innovation, Empowerment, Integrity & Respect Innovation - we apply creative solutions to exceed expectations internally and externally. We deliver creative solutions by pursuing continuous improvement, challenging the limits of conventional thinking to drive positive change, and engaging our customers to achieve synergy. Empowerment - we equip our employees to succeed. We nurture success by setting realistic goals and standards; with accountability and regular performance feedback, providing training opportunities for growth and learning and offering employees a safe and modern work environment. Integrity - our reputation is everything. We preserve and enhance our reputation by operating with the highest ethical standards, focusing on customer needs, and contributing positively to our community and environment. Respect - we act with honor in all our interactions. In our interactions, we accept and value individual differences, work together with a positive attitude and promote open and honest communication in a team-based environment. Reader Precision Solutions is a premier contract manufacturer of precision machined components, delivering high-quality, mission-critical solutions across a wide range of industries and applications. With decades of expertise, Reader Precision operates under a comprehensive turnkey manufacturing model, offering end-to-end control from early supplier involvement and engineering collaboration to full-scale production, precision finishing, and logistics management. This integrated approach ensures exceptional quality, reliability, and responsiveness for clients in the military & weapons systems, dental & healthcare, defense & tactical, flow control, and specialty markets. Reader Precision Solutions proudly serves a diverse customer base across North America and Europe. To discover why Reader Precision Solutions is the first choice for our partners, and an employer of choice, visit our website: **************************** Reader Precision Solutions is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills and experiences within our workforce.

Earn Extra Cash While Working From Home Make extra cash with this list of side gigs-part-time, passive income, and flexible options! Your Next Side Hustle Start Earning Today!

The Gund Company has an immediate opening for a full-time Entry Level Composites Shipping and Receiving Associate to join our team! Shift: First (6:30am - 3:00pm M-F) Hourly Wage: $22.00 - $24.00 Plant/Work Location: 809 Philip Drive Waukesha, WI 53186 The Gund Company, a leader in engineered material solutions, specializes in customized electrical insulation products. With 12 global facilities, we pride ourselves on delivering high-quality products and excellent customer service. We are currently seeking an Entry Level Composites Shipping and Receiving Associate to join our team. Job Summary Composites Shipping and Receiving Associate * Implement the Order Fulfillment Process steps related to the preparation of shipments and related documentation to ensure the complete satisfaction of the customer's requirements. * Knowledge of various items in stock; ability to select appropriate type and size of container; using appropriate packing material to prevent breakage or damage; closing and sealing containers; applying labels or entering identifying data on container. * Use of bar code readers, computer terminals or other electronic devices to track product. Key Responsibilities Composites Shipping and Receiving Associate * Prepare product for shipment to the customer by inspecting, labeling and packaging product according to standard procedures. * Packaging 4x8, 3x6, and 3x10 material skids. * Confirm correct quantity/counts against work order or packing slip. * Reconcile raw materials against the packing slip. * Storage of raw materials in their designated home locations. * Operate forklift. * Load and unload trucks. * Other duties as assigned. Requirements Requirements * Ability to operate a forklift * A High School Diploma/GED OR related experience. * Ability to read production or shipping documents. * Prior experience in a manufacturing industry is preferred. Work Environment Composites Shipping and Receiving Associate * This role is performed in a non-climate-controlled manufacturing environment with exposure to noise, fumes, and chemicals. * Personal protective equipment (PPE) is required. * The position involves repetitive tasks and manual labor, including lifting, bending, and standing for extended periods of time. * Ability to lift up to 40 pounds and perform manual tasks as required. Benefits * Paid Time Off (PTO) and Paid Holidays * Comprehensive benefits package (Health, Dental, Vision, Life, Disability). * 401(k) plan with a 50% employer match. * Employee Stock Ownership Plan (ESOP). * Ongoing training and development programs. Join a company that values your contribution and invests in your future. Apply today to start your career with The Gund Company! Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions of the Composites Shipping and Receiving Associate position. EEO Statement: It is the policy of The Gund Company to recruit, hire, train, and promote employees without discrimination. Rev: 06122025 RJ

Job Description In the Receiving department you must demonstrate the ability to process timely receipts, inspection, and disposition of items from suppliers. In the Shipping department you must demonstrate the ability to retrieve and prepare customer orders to their standards. The team member will demonstrate a contribution to the growth of a team environment and will be expected to meet all responsibilities listed below in a quality and professional manner. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Remove product from packaging and verify accuracy, security, and condition of product. Receive products into the appropriate Syteline warehouse and location, using proper FIFO inventory storage methods and following all purchase order instructions as needed. Affix all identification labels as per work instructions. Ensure all products identified on the purchase order have been included. Inspect products per the inspection standard to verify acceptability and accuracy. Work with the sourcing/material planning and product engineering team to resolve any purchase order, or part number/revision discrepancies. Unload incoming freight by use of a pallet truck, forklift or by hand. Strive to improve the efficiency and accuracy of existing processes through creative thinking and the help of other groups within the organization. Provide efficient and accurate information to all internal customers. Inspect materials, products, and containers and verify process. Able to cycle count inventoried items. Prioritize and process customer orders and service repair orders per the customer requirements and company commitments. Process small package and truck load shipments. Work with international shipping regulations and procedures. Teamwork: Willingness to be flexible to move to different parts of the shipping/receiving environment or organization to assist areas in need of additional resources. Ability to work well with a diverse group of co-workers, assist in training of other members and promote a strong team effort to ensure timely and efficient completion of customer requirements. Trainer Responsibility: Demonstrate ability to train and mentor new associates on all operations of the material environment. Willingness to become a certified forklift trainer to train new temps/associates at Dedicated Computing. QUALIFICATIONS/EDUCATION and/or EXPERIENCE Required: High School Diploma or GED and one year of related experience or equivalent combination of education, related training and experience. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and to other associates of the organization. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Communicate (via face to face, telephone, and email) daily with shipping vendors. Forklift Operation. Will provide training if necessary. PHYSICAL REQUIREMENTS The physical requirements described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is regularly required to stand; walk; use hands to manipulate objects, tools, or controls; reach with hands and arms; talk and hear. The associate must occasionally lift and/or move up to 35 pounds and occasionally lift and/or move up to 50 pounds with the assistance of others. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. This includes a highly regulated, climate-controlled, low to moderate noise environment. EQUAL EMPLOYMENT OPPORTUNITY All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.