Source control inspector part time jobs - 13 jobs

For more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We're hiring for a Quality Mechanical Source Inspector position in Cleveland, OH. The schedule is for the first shift, part-time or full-time, 30-40 hours a week, 3-5 days per week on an as-needed basis. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities You will be conducting precision mechanical inspections at one or more client suppliers in Cleveland, OH, and the Midwest region. Perform precision inspection verifications on mechanical parts, components, assemblies, and materials Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings Perform surface plate inspection of the first article, in-process, and lot sample parts if required Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary Visual acuity and the ability to detect defects in highly complex products Verify documentation packages to industry/commodity-specific standards Classify defect types and verify rework conducted during the time of the inspection Required Qualifications 5+ years of hands-on experience with precision mechanical parts inspection. Strong ability to read and interpret manufacturing drawings and industry/commodity standards. Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges). Experience with certificates of conformance and inspection documentation. Ability to adapt to new technology and software. Excellent visual acuity to detect defects in complex products. Preferred Qualifications Associate's degree or higher in a related field, or equivalent experience. Certification in inspection techniques or GD&T is a plus. Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. #ZR

No ag background, no problem! You'll learn all about agriculture from our top-notch experts who dedicate their lives to a cleaner, safer, better Ohio. The Ohio Department of Agriculture is currently seeking candidates for a Meat Inspector Trainee, Meat Inspection Division, headquartered in Delaware County. This position is responsible for: * Receives training and mentoring from higher level meat inspector to learn procedures and assists in conducting inspections of registered meat plants, private, commercial slaughtering plants and custom- exempt red meat and/or poultry processing facilities * Learns to perform ante mortem and postmortem inspections of carcasses and enforces state and federal sanitation, humane slaughter, meat processing and food safety policies, procedures and guidelines * Conducts visual examination of live animal and/or poultry prior to slaughter while looking for abnormalities in appearance and behavior such as sick, hurt and/or non-ambulatory * Contacts veterinarian for final disposition of unhealthy animals and records results * Makes determination of age of beef through dentition of cattle 30 months or older for removal of backbone due to concerns of BSE * Performs visual, tactile and/or incisory inspection of head, lymph nodes, viscera, carcass and offal to include liver, heart, brain and tripe to determine whether or not pathological conditions are present, and carcass is in clean and wholesome condition * Inspects all equipment, facilities and personnel to ensure acceptable sanitation levels and prohibiting use of unsanitary, unsafe and/or unapproved equipment and facilities until cleaned and/or corrected to include pest and rodent control, use of pesticides and chemicals, condition and use of potable water supply and waste and sewage systems * Halts production for poor sanitation and/or non-compliance * Assures proper disposition of unfit and condemned products, enforces sanitary dressing procedures and controls carcass branding * Learns labeling requirements and assists in reviewing labeling materials * Reviews proposed labels, product formulations, production procedures, quality control programs, quality control records and laboratory reports for state inspected meat and/or poultry establishments * Checks formulations of all types of meat food products for compliance with federal regulations and periodically monitors inspection procedures for maintaining compliance in production of meat products * Learns sampling procedures and assists higher level inspector with submission of product samples of products for analysis for microbiological adulterants and for consumer protection * Requires meat slaughter plants to conduct microbial testing for generic E.coli to verify adequacy of process controls for prevention of fecal contamination * Learns how to document verification results and navigate in the Public Health Information System (PHIS) * Assists higher level inspector with other meat inspection duties as assigned * Performs re-inspection of meat and/or poultry products and non-meat ingredients for such products intended for further processing or distribution Inspects critical control points in preparation and handling of meat or poultry products (i.e., monitors formulation, temperature controls, preparation procedures, use of restricted ingredients and sampling) to ensure compliance * Prepares, maintains and monitors required records, reports and formulations concerning product condemnations and retentions Controls all sanitation discrepancies and corrective actions * Assists in industry quality control programs * Analyzes report deviations, travel and pay reports and submits such through proper channels * Attends training courses (e.g., Incidence Command Systems training courses; Inspection System Procedures including Homeland Security) * Refresher seminars and on-job training activities This position shall be filled in accordance with the provisions of the OCSEA Collective Bargaining Agreement. ODA bargaining unit members have selection rights before non-bargaining unit members. All other applications will only be considered if an internal bargaining unit applicant is not selected for this position. We Support Diversity and Inclusion: ODA values its internal diversity and pledges to cultivate an inclusive and engaging environment for all employees where differences are embraced and celebrated. The agency commits to building a workforce that champions the advancement of these principles and initiatives. The values on which these efforts are founded are respect, empathy, transparency, equality, and equal access. What's in it for you: At the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Quality, affordable, and competitive medical benefits are offered through the Ohio Med PPO plan. Dental, Vision and Basic Life Insurance Dental, vision and basic life insurance premiums are free after one year of continuous service. Time Away from Work and Work/Life Balance Paid time off, including vacation, personal, and sick leave 11 paid holidays per year Childbirth/Adoption leave Ohio Public Employees Retirement System OPERS is the retirement system for State of Ohio employees. The employee contributes 10% of his/her salary towards his/her retirement. The employer contributes an amount equal to 14% of the employee's salary. Visit the OPERS website for more information. Deferred Compensation The Ohio Deferred Compensation program is a 457(b) voluntary retirement savings plan. Visit the Ohio Deferred Compensation website for more information. Maternity Benefits * Expanded maternity health care benefits available to state employees enrolled in the Ohio Med PPO and Ohio Med NN (narrow network) medical plan options. Several prenatal, childbirth, and post-childbirth services are provided at no out-of-pocket cost to employees utilizing network providers. * Examples of services now covered by network providers at 100% include: o Prenatal care, including physician visits and examinations. o Home health care services designated as maternity care (for expectant members on bed rest). o Inpatient claims for all types of delivery. o Inpatient NICU claims, from birth through discharge. o Postpartum care, including office visits for follow-up, and procedures/treatments directly related to maternity. * Medications prescribed for both antepartum and postpartum conditions (e.g., morning sickness, postpartum depression). Medical services provided by non-network providers will be processed at the applicable coinsurance, deductible, and out-of-pocket limits. * Prescription drugs that are directly related to maternity care are covered with no copay. The State of Ohio has collaborated with the prescription drug third-party administrator (OptumRx) to provide a list of covered medications that can be approved for zero copay via prior authorization from providers. 1 course in animal science, agribusiness and/or food business management OR 3 months experience in livestock industry/industrial meat and poultry processing AND 1 course in biological sciences or chemistry AND must be able to provide own transportation OR Equivalent of Minimum Class Qualifications for Employment noted above. Job Skills: Food Safety Inspection

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Take Your Construction Career to the Next Level! Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Construction Services team is looking for you! From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Step into Your New Role Kleinfelder is seeking qualified, responsible candidates for the position of Special Inspector/Materials Testing Technicians to work on projects in the Bowling Green, Ohio metropolitan area. We need inspectors and technicians who are comfortable being actively engaged on construction sites performing special inspections and testing of construction materials in the field. This role offers a dynamic work environment, the opportunity to work on a high-profile project, and be part of an industry leading company. This position can work on a full-time, part-time or flex basis. At Kleinfelder, we provide opportunities for each person to use their expertise and talents, grow professionally, and make an impact each and every day. We know our employees' commitment, pride, and passion contributes to the success of the company and to the successes of our clients. Hard work should reap rewards and build for the future-yours and ours. In addition to the opportunity to work on some of the largest and most interesting projects in the area, Kleinfelder also offers: * Competitive Wages; * Benefits, including medical, dental, vision, & life insurance; HSA & FSA; 401K; paid holidays; and paid time off (PTO); * Certification training and professional development (ICC, ACI, AWS, etc.); * Employee referral bonuses; * Career advancement opportunities with one of the largest and most respected firms in the industry. If you are looking for a CAREER opportunity, to development your professional skills, enhance your technical certifications, and work on resume building projects; then we want to talk to you! Kleinfelder recognizes our staff as the key to our success. Our employees are the backbone of an integrated company that provides innovative, dependable, and sustainable solutions for our clients. Accordingly, we partner with our staff to establish and achieve career development goals designed to build your professional experience and technical confidence by helping you obtain additional inspection and testing certifications. Why Join Us? * Career Development: Comprehensive training program to obtain industry-recognized certifications, including ACI, ICC, NICET, and others. Certification leads to immediate pay increases. * Exposure to Landmark Projects: Contribute to high-profile projects with significant impact and visibility. * Travel Opportunities: Explore new cities and regions while working on diverse construction projects. * Competitive Compensation and Benefits: We offer competitive salaries, paid travel expenses, and a robust benefits package. Minimum requirements for the role of Special Inspector should have at least one of the following certifications or experience (or able to obtain within first 6 months): * 2+ years of special inspection and/or construction materials testing experience. * Radiation safety training for the operation of a nuclear density gauge. * ACI Concrete Field-Testing Technician - Grade 1 * Valid driver's license and clean driving record * Use a company provided laptop or tablet computer and a working knowledge of MS Office programs (e.g., Word, Excel, Outlook, etc.). * High school diploma or equivalent. * A good work ethic and high level of personal integrity. * Ability to monitor contractors and report results verbally and in writing. * Proficiency in preparing clear and accurate detailed reports of testing and inspection activities and maintaining work activity records. * Attention to detail, quality, and safety. * Authorization to work in the United States. In addition to the above required certifications, hiring preference will be given to those with any of the following desired certifications: * ICC Special Inspector Certifications (Reinforced Concrete, Pre-stressed Concrete, Soil, Spray-applied Fireproofing, Structural Masonry, Structural Welding, Structural Steel and Bolting), * Certified Welding Inspector (CWI) - American Welding Society (AWS), This position requires the ability to: * Bend, stoop, and lift up to 50 pounds (22.68 kg) repetitively and over 50 pounds (22.68 kg) using handling equipment (hand truck, etc.). * Operate heavy equipment as necessary (i.e., ultrasonic non-destructive testing machine, concrete cylinder press, etc.). * Maintain safe mobility over construction obstacles by foot and ladder, traversing over rough broken ground and steep surfaces. * Work outside in variable weather at field sites and in labs with various levels of safety protection required. Responsibilities include but are not limited to: * Perform field observations and materials sampling/testing during construction of buildings, bridges, and roadways. * Perform testing on construction materials including, soils, reinforcing steel, concrete, masonry, structural steel, fireproofing, metal decking, and paving. * Write daily field reports documenting work performed by the various contractors and indicating compliance/non-compliance with contract documents. * Cast field samples of concrete, masonry, grout, etc. for strength verification. * Provide daily phone calls to Department Manager to inform of daily progress of the project. * Pick-up construction material samples and deliver to laboratory, deliver equipment to site technicians. * Implementation of the Client's Project Management Plan, KLF's Quality Management Plan, contract documents, and the local jurisdiction's requirements. * Contribute to building a high-performing team by mentoring and supporting the Owner's team within the scope of work's space. * Support the Owner's quality team by consulting the project's team leading effective cross-functional communication. Move Forward with Kleinfelder: Kleinfelder and its' subsidiaries and affiliates, has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 110 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder, and its' subsidiaries and affiliates, is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder, and its' subsidiaries and affiliates, offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder, and its' subsidiaries and affiliates, is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder, and its' subsidiaries and affiliates, does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder, and its' subsidiaries and affiliates, will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder, and its' subsidiaries and affiliates, explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We're hiring for a Quality Mechanical Source Inspector position in Cleveland, OH. The schedule is for the first shift, part-time or full-time, 30-40 hours a week, 3-5 days per week on an as-needed basis. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities You will be conducting precision mechanical inspections at one or more client suppliers in Cleveland, OH, and the Midwest region. Perform precision inspection verifications on mechanical parts, components, assemblies, and materials Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings Perform surface plate inspection of the first article, in-process, and lot sample parts if required Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary Visual acuity and the ability to detect defects in highly complex products Verify documentation packages to industry/commodity-specific standards Classify defect types and verify rework conducted during the time of the inspection Required Qualifications 5+ years of hands-on experience with precision mechanical parts inspection. Strong ability to read and interpret manufacturing drawings and industry/commodity standards. Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges). Experience with certificates of conformance and inspection documentation. Ability to adapt to new technology and software. Excellent visual acuity to detect defects in complex products. Preferred Qualifications Associate's degree or higher in a related field, or equivalent experience. Certification in inspection techniques or GD&T is a plus. 50% hourly rate for any travel time ("p2p") Mileage reimbursement at the US gov't rate ($0.725 per mile driven). Untaxed.Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts Days: 10-hour shifts starting between 5 & 6 am Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. M-F 8 hrs. or 10 hrs. M-TH 10 hrs. or 12 hrs. Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: Perform NDT tests and compare to the related specs for acceptability. Documentation is constantly and effectively monitored for accuracy and completeness. Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. Work standards are met or improved. Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints or engineering specifications to obtain product information. Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. Monitor inspection instrument calibrations. Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that “as built” drawings and inspection reports have variable data recorded, if applicable. Write reports and create charts regarding inspection and testing results. Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. Perform calibrations on NDT equipment and facilities as required. Examine defective parts to determine cause of defect and recommend changes or modifications in the process. Monitor welder certification and weld procedure qualification tests for adherence to the WPS. Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: High school diploma is required. Classroom training and the required hours of experience to attain at least two NDT disciplines. Training in SPC data collection techniques and evaluation. Training in use and safety of chemical handling and radiography. Classroom training in the area of personal certification/qualification level. Must be a US citizen. REQUIRED EXPERIENCE/SKILLS: Minimum 5 years' experience as a certified NDT Technician in at least one discipline. Minimum of 5 years' experience working with or around a metal joining/welding facility. Proven problem-solving skills with proven ability to establish an effective course of action. Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. RELATIONSHIPS: Develops and maintains close working relationships with teams, operators, GTC supervisors and occasionally customer representatives. JOB ENVIRONMENT: Works across multiple areas including machine shops, fabrication facilities, and assembly bays to test various weld components. Environment involves exposure to machine oils, coolants, welding fumes, and metal particles during test activities. Moderate noise levels from nearby manufacturing operations while conducting tests. Climate-controlled inspection areas with specialized lighting for detailed visual examinations, though some tests occur in active production environments. Work performed under strict defense quality standards including AS9100, ISO 9001, and military specifications. Position requires handling of secured technical drawings, specifications, and sensitive defense component information. Documentation must meet rigorous traceability and accountability requirements for defense applications. PHYSICAL REQUIREMENTS: Must be able to stand and walk extensively throughout multiple facility areas during shift, typically 10-12 hours with frequent movement between test pieces. Requires ability to lift and maneuver parts and assemblies weighing up to 50 pounds for positioning during inspection processes. Extensive bending, kneeling, and crouching to access all areas of large assemblies and fabricated components. Fine motor skills and steady hands essential for operating precision measuring equipment including calipers, micrometers, and coordinate measuring machines. Excellent visual acuity required for detecting surface defects, dimensional variations, and weld quality issues. Ability to work at various heights using ladders and platforms when inspecting large assemblies. Manual dexterity needed for handling delicate measuring instruments and positioning components for detailed examination. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to:• Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary• Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored• Reading and following written and verbal work instructions• May work overtime and/or weekends as assigned Qualifications• HS diploma or GED equivalency• Steel toe shoes• Basic math skills• Detailed oriented • Follow verbal and written instructions• Provide accurate and complete information for required paperwork• Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us• Variety of work in various manufacturing plants and industries• Medical, Dental, Vision and Short-Term Disability, upon eligibility• Paid weekly• Six (6) paid Holidays, upon eligibility• Forty (40) hours of paid vacation, upon eligibility• Retirement Program, upon eligibility• Birthday, Work Anniversary and Employee of the Month recognition program• Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts * Days: 10-hour shifts starting between 5 & 6 am * Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. * M-F 8 hrs. or 10 hrs. * M-TH 10 hrs. or 12 hrs. * Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: * Perform NDT tests and compare to the related specs for acceptability. * Documentation is constantly and effectively monitored for accuracy and completeness. * Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. * Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. * Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. * Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. * Work standards are met or improved. * Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: * Reads and analyzes blueprints or engineering specifications to obtain product information. * Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. * Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. * Monitor inspection instrument calibrations. * Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that "as built" drawings and inspection reports have variable data recorded, if applicable. * Write reports and create charts regarding inspection and testing results. * Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. * Perform calibrations on NDT equipment and facilities as required. * Examine defective parts to determine cause of defect and recommend changes or modifications in the process. * Monitor welder certification and weld procedure qualification tests for adherence to the WPS. * Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: * High school diploma is required. * Classroom training and the required hours of experience to attain at least two NDT disciplines. * Training in SPC data collection techniques and evaluation. * Training in use and safety of chemical handling and radiography. * Classroom training in the area of personal certification/qualification level. * Must be a US citizen. REQUIRED EXPERIENCE/SKILLS: * Minimum 5 years' experience as a certified NDT Technician in at least one discipline. * Minimum of 5 years' experience working with or around a metal joining/welding facility. * Proven problem-solving skills with proven ability to establish an effective course of action. * Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) * Eye Examination minimum requirement - Jaeger 1 at 12" with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. RELATIONSHIPS: * Develops and maintains close working relationships with teams, operators, GTC supervisors and occasionally customer representatives. JOB ENVIRONMENT: * Works across multiple areas including machine shops, fabrication facilities, and assembly bays to test various weld components. * Environment involves exposure to machine oils, coolants, welding fumes, and metal particles during test activities. * Moderate noise levels from nearby manufacturing operations while conducting tests. * Climate-controlled inspection areas with specialized lighting for detailed visual examinations, though some tests occur in active production environments. * Work performed under strict defense quality standards including AS9100, ISO 9001, and military specifications. * Position requires handling of secured technical drawings, specifications, and sensitive defense component information. * Documentation must meet rigorous traceability and accountability requirements for defense applications. PHYSICAL REQUIREMENTS: * Must be able to stand and walk extensively throughout multiple facility areas during shift, typically 10-12 hours with frequent movement between test pieces. * Requires ability to lift and maneuver parts and assemblies weighing up to 50 pounds for positioning during inspection processes. * Extensive bending, kneeling, and crouching to access all areas of large assemblies and fabricated components. * Fine motor skills and steady hands essential for operating precision measuring equipment including calipers, micrometers, and coordinate measuring machines. * Excellent visual acuity required for detecting surface defects, dimensional variations, and weld quality issues. * Ability to work at various heights using ladders and platforms when inspecting large assemblies. * Manual dexterity needed for handling delicate measuring instruments and positioning components for detailed examination. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to: • Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary • Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored • Reading and following written and verbal work instructions • May work overtime and/or weekends as assigned Qualifications • HS diploma or GED equivalency • Steel toe shoes • Basic math skills • Detailed oriented • Follow verbal and written instructions • Provide accurate and complete information for required paperwork • Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us • Variety of work in various manufacturing plants and industries • Medical, Dental, Vision and Short-Term Disability, upon eligibility • Paid weekly • Six (6) paid Holidays, upon eligibility • Forty (40) hours of paid vacation, upon eligibility • Retirement Program, upon eligibility • Birthday, Work Anniversary and Employee of the Month recognition program • Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts Days: 10-hour shifts starting between 5 & 6 am Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. M-F 8 hrs. or 10 hrs. M-TH 10 hrs. or 12 hrs. Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: Perform NDT tests and compare to the related specs for acceptability. Documentation is constantly and effectively monitored for accuracy and completeness. Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. Work standards are met or improved. Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints or engineering specifications to obtain product information. Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. Monitor inspection instrument calibrations. Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that “as built” drawings and inspection reports have variable data recorded, if applicable. Write reports and create charts regarding inspection and testing results. Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. Perform calibrations on NDT equipment and facilities as required. Examine defective parts to determine cause of defect and recommend changes or modifications in the process. Monitor welder certification and weld procedure qualification tests for adherence to the WPS. Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: High school diploma is required. Classroom training and the required hours of experience to attain at least two NDT disciplines. Training in SPC data collection techniques and evaluation. Training in use and safety of chemical handling and radiography. Classroom training in the area of personal certification/qualification level. Must be a US citizen. REQUIRED EXPERIENCE/SKILLS: Minimum 5 years' experience as a certified NDT Technician in at least one discipline. Minimum of 5 years' experience working with or around a metal joining/welding facility. Proven problem-solving skills with proven ability to establish an effective course of action. Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. RELATIONSHIPS: Develops and maintains close working relationships with teams, operators, GTC supervisors and occasionally customer representatives. JOB ENVIRONMENT: Works across multiple areas including machine shops, fabrication facilities, and assembly bays to test various weld components. Environment involves exposure to machine oils, coolants, welding fumes, and metal particles during test activities. Moderate noise levels from nearby manufacturing operations while conducting tests. Climate-controlled inspection areas with specialized lighting for detailed visual examinations, though some tests occur in active production environments. Work performed under strict defense quality standards including AS9100, ISO 9001, and military specifications. Position requires handling of secured technical drawings, specifications, and sensitive defense component information. Documentation must meet rigorous traceability and accountability requirements for defense applications. PHYSICAL REQUIREMENTS: Must be able to stand and walk extensively throughout multiple facility areas during shift, typically 10-12 hours with frequent movement between test pieces. Requires ability to lift and maneuver parts and assemblies weighing up to 50 pounds for positioning during inspection processes. Extensive bending, kneeling, and crouching to access all areas of large assemblies and fabricated components. Fine motor skills and steady hands essential for operating precision measuring equipment including calipers, micrometers, and coordinate measuring machines. Excellent visual acuity required for detecting surface defects, dimensional variations, and weld quality issues. Ability to work at various heights using ladders and platforms when inspecting large assemblies. Manual dexterity needed for handling delicate measuring instruments and positioning components for detailed examination. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job Description Supplier Inspection Services, Inc. (SIS, Inc.) is hiring full-time Manufacturing Quality Inspectors at $15.00 per hour in the Dayton, OH and surrounding areas. Supplier Inspection Services, Inc. provides quality management support services that assist our clients manufacture and deliver high quality products. Our clients include component manufacturers in the Automotive, Aerospace, Appliance and general manufacturing industries. Our Manufacturing Quality Inspectors perform visual inspection and rework of manufactured parts. Manufacturing Quality Inspectors starting pay @ $15.00/hour with room for advancement. Manufacturing Quality Inspectors job duties include but are not limited to: • Performing a range of varied inspection tasks • Using inspection, measuring and test equipment as necessary • Perform visual inspection either at one of our local facilities or where the parts are manufactured or stored • Reading and following written and verbal work instructions • May work overtime and/or weekends as assigned Qualifications • HS diploma or GED equivalency • Steel toe shoes • Basic math skills • Detailed oriented • Follow verbal and written instructions • Provide accurate and complete information for required paperwork • Must have own vehicle and a valid driver's license • Must be able to walk, stand, lift up and move material and perform repetitive tasks for an entire shift What You'll Love About Working With Us • Variety of work in various manufacturing plants and industries • Medical, Dental, Vision and Short-Term Disability, upon eligibility • Paid weekly • Six (6) paid Holidays, upon eligibility • Forty (40) hours of paid vacation, upon eligibility • Retirement Program, upon eligibility • Birthday, Work Anniversary and Employee of the Month recognition program • Advancement opportunities *Part-time applicants must be willing to work a full-shift (at least 8 hours) per shift.