Structural analysis engineer jobs in Houston, TX - 397 jobs

This position is accountable for planning, directing, and coordinating activities of designated project to ensure that goals or objectives of project are accomplished within prescribed time frame and funding parameters by performing the following duties personally or through subordinates, if applicable. The incumbent must have the ability and flexibility to work varying shifts, long hours (8-12 hours) and weekend hours according to project needs. The incumbent must support the guiding beliefs and core values of Orion, which are centered on Safety, Quality, Delivery, and Teamwork most importantly, with each built upon the all-important foundation of Integrity. SPECIFIC RESPONSIBILITIES Assists in the preparation and planning of pre-job meetings (examples: plans, specification, budgets, cost targets, scheduling, and others as necessary). Assists Project Manager(s) in the management of all assigned jobs. Reviews & processes shop drawings and submittals (including those from subcontractors), checking for accuracy when compared to drawings and specifications. Distributes all drawing revisions to Project Manager(s), Superintendent(s) and Subcontractors; and request new shop drawings from suppliers and subcontractors as necessary to match revisions. Prices all drawing revisions and Field Extra Work Tickets; review with Project Manager(s) and submit to General Contractor or client; update stick set and drawing log with each revision received. Maintains the RCO log and PM Submittal Log for each assigned project. Keeps all project schedules updated with actual durations for each task as compared to the original Base-Line Schedule; document all applicable delays (weather, GC, suppliers, others). Orders, ensures timely delivery, and reviews accuracy of materials such as rebar, shoring, forming, and post-tensioning. Contacts the Superintendent(s) on assigned job(s) frequently and visit job site(s) regularly to identify problems and assist in reaching solutions. Approves and codes assigned invoices, as requested by project manager. Tracks Manhours & Job Cost for all assigned jobs weekly. Meets with Superintendents to identify target cost to complete job under budget. Assists Project Manager(s) with End of Month Financial Reports for all assigned jobs. Prepares project reports for management, client, or others. Coordinates project activities with activities of government regulatory or other governmental agencies. All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary or trade secret information belonging to the Company. EMPLOYEE SAFETY AND COMPLIANCE Responsible and accountable for incumbent's own personal safety. Responsible and accountable for the safety of all co-workers and any others incumbent encounters. Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed. Complies with all applicable laws, regulations and Company policies and procedures, and is subject to appropriate disciplinary action (including dismissal) for failure to do so. Reports violations of applicable laws, regulations or Company policies and procedures promptly, and is subject to appropriate disciplinary action (inluding dismissal) for failure to do so. Performs other related administrative and technical duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.). POSITION REQUIREMENTS A minimum of (1) year of construction related experience. BS Degree in Construction Management required or related discipline and field experience in commercial concrete construction, or equivalent combination of education and experience. In addition, the incumbent must have: Working knowledge of Project Engineer functions. Excellent computer skills including MS Office (Excel, Word, PowerPoint), MS Project, Adobe, construction drawings software (i.e., PlanGrid), and ability to learn new software systems as required for the position. Outstanding verbal and written communication skills with the ability to interact with employees at all levels, clients, vendors, and suppliers. Strong leadership skills with the ability to work well under pressure and high stress situations. Ability to manage multiple projects, meet tight deadlines, and adapt to changing work priorities. Problem solving, critical thinking, and analytical skills for project efficiency. Ability to work in different weather conditions (heat, cold, etc.) and office settings (office, trailer at the field, etc.). The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. PHYSICAL/MENTAL REQUIREMENTS The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate and executive. The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise. Compensation & Benefits: An excellent compensation and benefits package is offered. Benefit plans include: Medical, including Prescription Drugs Dental Vision Life and AD&D Insurance Short Term and Long-Term Disability Insurance Employee Assistance Plan 401(k) Retirement Plan Paid Time Off for Vacation, Sick, Holidays, Jury Duty and Bereavement Leave Pre-Tax Health and Dependent Care Flexible Spending Accounts Career Growth & Development

Looking for Candidates in The Woodlands, Magnolia, Tomball, Conroe and Spring, TX area. This position will be located in our Magnolia, TX office. Your Career. Our Projects. Endless Possibilities. At MBA Energy & Industrial, we don't just build structures - we build careers. As a Project Engineer / Assistant Project Manager, you'll be right at the heart of our industrial building projects, learning from seasoned experts while making a real impact on day one. This isn't a role where you'll be stuck in the background. You'll be involved in planning, procurement, scheduling, and on-site coordination, gaining a full view of how a project moves from blueprint to reality. If you're hungry to learn, ready to take ownership, and eager to grow into a future leadership role - this is your launchpad. What You'll Do Partner with Project Managers and Superintendents to keep projects on track and on budget. Handle procurement - from materials and equipment to subcontractor services. Review and process submittals, schedules, and project documentation. Negotiate proposals with subcontractors and vendors to get the best value. Visit job sites to verify design intent, monitor safety, and track progress. Review drawings and coordinate with the design team to resolve issues before they become problems. Take meeting notes, publish minutes, and keep the team aligned. Maintain organized project logs and documentation. Assist with contract administration and change order management. What You'll Bring Bachelor's degree in Construction Management or related field. A strong work ethic and the drive to learn from the best. General understanding of construction principles and practices. Detail-oriented with excellent problem-solving skills. Ability to juggle multiple priorities without missing deadlines. Exceptional verbal and written communication skills. Proficiency in Microsoft Office (Word, Excel, Outlook). Why You'll Love Working Here Career growth - we develop our people into leaders. Exposure to all phases of the construction process. Team-focused, supportive work environment. Competitive pay + bonus opportunities. Travel opportunities (~40%) to see your projects come to life. Comprehensive benefits package, including 401(k) with company match. Step into a role where your work matters, your growth is supported, and your career path is clear. Apply today and start building more than just projects - build your future with MBA Energy & Industrial.

D'Leon Consulting Engineers is seeking an Office Engineer with experience supporting civil, transportation, or aviation construction projects in Houston, TX. Responsibilities Assist project managers and construction teams with document control, correspondence, and contract administration. Manage the receipt, tracking, and distribution of RFIs, submittals, technical documents, plans, and specifications. Prepare and maintain project logs, meeting minutes, and weekly progress reports. Support review of submittals, drawings, and construction deliverables for accuracy and compliance. Coordinate with designers, contractors, inspectors, and airport or agency representatives to ensure timely communication and issue resolution. Assist with change order reviews, cost tracking, and schedule updates. Maintain organized electronic and hard-copy project files, ensuring accurate and up-to-date documentation. Help prepare project correspondence, reports, and administrative packages as required. Support project closeout activities including documentation, as-built verification, and turnover materials. Qualifications Bachelor's degree in Engineering, Construction Management, Architecture, or related field preferred. 2-5 years of experience in construction or engineering project support; airport or public infrastructure experience a plus. Familiarity with RFIs, submittals, document control systems, and construction contract processes. Strong organizational, communication, and writing skills. Ability to work collaboratively with multidisciplinary teams and manage multiple tasks in a fast-paced project environment. D'Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

At Oleon, we bring you natural chemistry. Ambitious, with both feet on the ground. That's who we are and that's how we will continue to grow. Our specialty lies in converting natural fats and oils into a wide range of oleochemical products. We offer them in a large variety of markets such as: cosmetics, nutrition, crop protection, industrial ingredients, lubricants, oilfield, coatings, detergents, and many more. Oleon has over 1,500 employees worldwide in 9 different countries. Enthusiastic people who are completely in their element here at Oleon are more than welcome to join our team. We are looking for a Project Engineer for our Conroe, Texas plant. Some of your main duties & responsibilities: Assist in the development and execution of engineering projects related to plant operations, equipment upgrades, and process improvements. (10%) Support the design, installation, and commissioning of new systems, equipment, and technologies within the esterification process. (10%) Coordinate with cross-functional teams (maintenance, production, safety) to ensure timely completion of project tasks. (20%) Monitor project progress, track budgets, and report on milestones to ensure adherence to project timelines and financial targets. (20%) Assist in troubleshooting and resolving technical issues during project implementation. (10%) Ensure that all engineering projects comply with company standards, regulatory requirements, and industry best practices. (10%) Prepare technical documentation, reports, and presentations for project updates. (10%) Support senior engineers in identifying opportunities for process optimization, cost savings, and increased efficiency within the plant. (5%) Participate in risk assessments and safety reviews for engineering projects. (5%) Who are we looking for? You'll succeed if: Required Qualifications: Bachelor's degree in chemical engineering or a related field. 3-5 years of experience in project engineering, preferably within a manufacturing or process environment Strong knowledge of project management principals. Ability to read and interpret technical drawings. Excellent troubleshooting skills and the ability to work in high-pressure environments to resolve issues quickly. Strong analytical and problem-solving skills and attention to detail. Strong communication and collaboration skills, with the ability to work cross-functionally with production, maintenance, and global engineering teams. Preferred Qualifications: Experience or coursework related to esterification or chemical manufacturing processes Familiarity with process control systems Next to your skills, it is your drive and motivation that will make all the difference! What's in it for you? Your benefits: You will join a company with ambitious goals and a welcoming atmosphere. Both your personal development and work-life balance are equally important to us.

Communities everywhere share the need for clean water. And as they work to meet that need, they're facing new, more complex challenges every day. Our water professionals collaborate to contribute innovative ideas, guided by scientific rigor and a vision for sustainable growth. Every day, we're helping communities improve, reuse, and protect our world's most precious resource. Join our team to deliver transformational projects that will benefit future generations. Grow with us, H2O+U. Your Opportunity Stantec's Water practice has a unique opportunity for a Civil Engineer with experience in civil, water/wastewater, municipal utility, or water resources engineering to join our team in Houston, TX. This role will support City of Houston wastewater projects in a full-time staff augment position located at city offices. The role of the Civil Engineer would include managing on-going and planned design contracts, reviewing, evaluating and/or designing sub-systems and product, material, and equipment specifications. You will perform a variety of tasks which may include preparing calculations, conducting field work, coordinating simple tasks, and preparing meeting documentation. Your Key Responsibilities - Support the project team in the development of design plans and specifications for a variety of water/reclaimed water/wastewater distribution and collection systems, and wastewater treatment projects primarily for public municipal clients - Assist with the review and/or preparation of detailed engineering studies, technical and infrastructure planning reports, hydraulic models and design tasks associated with municipal distribution and collection systems, and related facilities - Perform quality reviews of documents in various phases of design development including engineering calculations, design reports, and construction plans. - Assist in the evaluation and selection of civil systems, equipment, and materials. - Support senior staff in review and preparation of project cost estimates and participate in value engineering exercises. - Review and manage the preparation, revision, and coordination of permit applications and documentation for utility, environmental, and municipal permits through local, state and federal jurisdictions; respond to requests for additional information, and monitor and report status of various permit submittals - Attend and participate in project meetings with internal team members and/or external consultants. - Attend and participate in meetings with clients, municipal officials, and contractors to review project needs - Take sufficient notes at meetings to document discussions and organize follow-up action items. - Coordinate and keep consistent communication with other project team disciplines to ensure entire design team has same design intent and is on schedule - Support construction projects with periodic field site visits, construction observation, and witnessing utility testing - Assist in the review of contractor shop drawings and submittals, respond to request for information, prepares site observation reports, and performs other construction administration tasks - Prepared to step in and assist with any of the project teams tasks in order to complete projects on time, on budget, and with quality design Your Capabilities and Credentials - Be a self-motivated individual, possessing strong interpersonal and communication skills, both written and verbal, along with the ability to prioritize multiple tasks - Candidate must have strong technical writing abilities - Experience with design of wastewater treatment, collection and pumping infrastructure is preferred - Familiarity with collaborative project delivery methods is a plus. - Technical knowledge in water, sewer and drainage projects is plus - Familiarity with Microsoft Office Suite, AutoCAD Civil 3D, ArcGIS Mapping is a plus and willingness to learn relevant software such as WaterCAD, SewerCAD, StormCAD, etc. Education and Experience - Must have Bachelor's of Science degree in Civil or Environmental engineering - 5--8 years of experience in civil, environmental and or water resources arena - Licensed engineer in the state of Texas or ability to obtain within a year from hire date Must have a valid driver's license Typical office environment working with computers and remaining sedentary for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. **Pay Transparency:** In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. **Benefits Summary:** Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements **Primary Location:** United States | TX | Houston **Organization:** BC-1773 Water-US Gulf **Employee Status:** Regular **Travel:** No **Schedule:** Full time **Job Posting:** 16/06/2025 05:06:58 **Req ID:** REQ250000QK Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

Engineer I, under close supervision, assists with engineering system design during all phases of multiple, simultaneous projects by performing design calculations, specifications, interpreting and preparing reports, and preparing cost estimates, impact studies, permits and producing deliverable drawings. Job Responsibilities * Assist Engineers and Designers in the design and detail of engineering systems; write/edit specifications and research design options on appropriate devices, equipment, and system selections. * Apply prescribed techniques and procedures in accordance with established criteria to perform assigned tasks. Research document findings and providing recommendations. * Collects data, gathers information and performs basic and standard computations or analysis. May prepare drawings and visual aids. * Participate in meetings and reviews to ensure code compliance. May conduct site investigations and observations. * May interact with staff, the public, officials, and contractors. Limited client-facing responsibilities. Requirements Required Education and Experience * Bachelor's degree in engineering Preferred Education & Experience * 0 - 1 year experience * Engineer-in-Training/Fundamentals of Engineering (EIT) * Strong grasp of core engineering principles relevant to their discipline (e.g., civil, mechanical, electrical). * Ability to analyze complex problems, identify root causes, and develop effective solutions. * Familiarity with tools like AutoCAD, MATLAB, SolidWorks, or discipline-specific software. * Competence in interpreting data, using statistics, and applying analytical tools. * Understanding of timelines, budgeting, and resource allocation * Critical Thinking and Attention to Detail Lockwood, Andrews & Newnam, Inc. (LAN) is an Equal Opportunity Employer and gives consideration for employment to qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, citizenship, disability status, protected veteran status, genetic information, or any other characteristic protected by federal, status, or local laws and to prohibit discrimination and harassment based on any of these factors. Lockwood, Andrews & Newnam, Inc., is committed to ensuring equal employment opportunity, including providing reasonable accommodations to individuals with a disability. Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may contact the Human Resources Department at ************ or by email using ***************************** . For more information about your rights under the law, see: Know Your Rights

Job DescriptionStress Analyst - Lunar Terrain Vehicle (NASA LTVS Award Contingent) Houston, Texas 77059 About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Intuitive Machines is seeking a skilled and experienced Stress Analyst/Engineer to join our dynamic team. As a Stress Engineer you will work in a cross-functional team on the analysis, development, manufacture, test, and on-orbit operation of flight and ground support hardware. *Employment in this role is contingent upon NASA selecting Intuitive Machines as the winner of the LTVS program, scheduled for announcement later in 2025. Responsibilities: Perform detailed stress analysis and finite element analysis (FEA) to assess the structural integrity and performance of aerospace components and systems. Support the analysis of Carbon Fiber Structural panels and joints, and metallic secondary structure. Analyze flight and ground loads to determine the effects on vehicle structures and subsystems, and provide recommendations for load mitigation and optimization. Evaluate material properties and compatibility for use in aerospace applications, considering factors such as strength, weight, and thermal characteristics. Verify the structural integrity of vehicle designs through analysis, testing, and simulation, identifying potential failure modes and proposing design modifications as needed. Identify and assess potential risks associated with structural design and performance, and develop risk mitigation strategies to ensure mission success. Prepare comprehensive engineering reports, documentation, and technical presentations to communicate analysis results, findings, and recommendations to internal stakeholders and customers. Collaborate with cross-functional teams, including design engineers, systems engineers, and manufacturing engineers, to ensure alignment and integration of structural requirements throughout the product development lifecycle. Qualifications: (This position is open to multiple levels of experience, with multiple potential openings) Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field; Master's degree preferred. Various years of experience in aerospace stress analysis, structural engineering, or related field, preferably in the aerospace industry. Familiarity with component design using 3D CAD software, preferably CREO, for basic design trades in support of multiple design engineers Proficiency in finite element analysis (FEA) software tools such as ANSYS, FEMAP/Nastran, Experience with aerospace materials, composites, and manufacturing processes. Knowledge of industry standards and regulations related to aerospace structural design and analysis (e.g., FAA, MIL-STD, ASTM). Strong analytical and problem-solving skills, with the ability to interpret complex data and make informed engineering decisions. Excellent communication and interpersonal skills, with the ability to collaborate effectively in a multidisciplinary team environment. EEOC Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States. We have an exciting opportunity for a Stress Analyst to join the team with Bastion Technologies, a teammate company. We are actively searching for qualified candidates for this potential opening; however, we do not have assurance at this time when the position will be finalized and opened. Because we have strong reason to believe the position will be approved soon, we are proceeding with identifying qualified candidates and conducting interviews. The Stress Analyst will: * Analyst to support structural analysis tasks across multiple NASA Divisions * Use stress analysis experience to perform classical hand stress analysis, finite element stress analysis and fracture analysis. * Be familiar with NASA standards for analysis, including Fracture Control * Know and have experience with using NASGRO * Be proficient in the use of finite element modeling techniques using FEMAP or PATRAN for finite element model development and NASTRAN for finite element solutions. * Prepare structural analysis reports and work with other engineers to find resolutions to problems. * Perform other duties as required. Requisition Qualifications: This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. * Typically requires a bachelor's degree in Engineering and a minimum of 1 year of experience in the field or in a related area * Bachelors degree in Mechanical or Aerospace Engineering * Familiarity with desktop software applications, MS Office is required. * Must have excellent oral and written communication skills Requisition Preferences: * Previous experience performing structural analysis on NASA spaceflight hardware * Experience using FEMAP or PATRAN and MSC/NASTRAN Why Join Our Team? In addition to exciting career opportunities, we also have: * Excellent personal and professional career growth * 9/80 work schedule (every other Friday off), when applicable * Onsite cafeteria (breakfast & lunch) * Much, much more! For more information on our partnership with NASA at Johnson Space Center (JSC), please visit ************************* * Proof of U.S. Citizenship or US Permanent Residency may be a requirement for this position. * Must be able to complete a U.S. government background investigation. * Management has the prerogative to select at any level for which the position is advertised. Essential Functions Work Environment Generally, an office environment, but can involve inside or outside work depending on task. Physical Requirements Work may involve sitting or standing for extended periods (90% of time). May require lifting and carrying up to 25 lbs. (5% of time). Equipment and Machines Standard office equipment (PC, telephone, printer, etc.). Attendance Regular attendance in accordance with established work schedule is critical. Ability to work outside normal schedule and adjust schedule to meet peak periods and surge requirements. Other Essential Functions Professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. #JETS #JETSII

Who we are: As Paragon Space Development celebrates 32+ years of providing award-winning life support and thermal control solutions for extreme environments, we've recognized that it is our employees that keep our business thriving. By any measure, Paragon is an exciting and rewarding place to work. Our goal is to hire the best and allow you to do the work that you enjoy! Do you want to make a difference immediately? Are you ready to apply your aerospace design engineering skills to develop cutting edge life support and thermal control products for extreme environments on Earth and in space? Are you ready to play a critical role literally doing what has not been done before? Can you excel in that team environment and carry your share of the load while also relying on others to do their part? If this sounds like you, we want you to join Paragon Space Development Corporation now. Description of Duties: Independently and/or collaboratively formulate and perform static structural, fatigue and fracture analysis of aerospace components, assemblies, and systems Support generation of static, dynamic, and fatigue test plans and procedures, special test equipment, and sensor placement. Perform data analysis and model correlation. Work with design engineers to help drive weight optimized, structural sufficient parts Generate formal documentation such as technical memorandums, analysis reports, design and development books, or product manuals Ability to work effectively in a fast-paced interdisciplinary environment with changing needs and requirements Knowledge, Skills, and Abilities: Derivation of vehicle load paths and reaction loads using free body diagrams Familiarity with classical aerospace sizing methods (ex: Bruhn, Niu, Roark) Knowledge of, and skills in the use of 1st principals to perform 1st order static structural analysis by hand Demonstrated proficiency with one or more of the following analysis codes: NX FEMAP, PATRAN, Nastran, ANSYS, ABAQUS Proficiency in FEM modeling techniques such as boundary conditions, mid-surfacing, element types, structural idealization, bolted connections, contact, verification methods, etc. Proficient in structural analysis of aerospace system and components, including linear and nonlinear static analysis, stability analysis, Sine and random vibration analysis, shock and impact analysis Knowledge and experience with the design and development of spacecraft, spacesuits, aircraft, military, or other relevant vehicles, systems, subsystems, assemblies, and/or components Knowledge and experience in the engineering product development lifecycle, ranging from requirements development through design, manufacture, test, and operations Skills in Microsoft Office applications (Excel, Word, PowerPoint, Visio, Project) Ability to effectively communicate in both written and spoken form Ability to establish and maintain effective, positive work relationships; have creativity, flexibility and resourcefulness; have discriminating judgment, tact and sense of humor Ability to evaluate Junior Engineer's designs and concepts and provide expert advice that will enhance the resulting designs and to train junior engineers in their duties Analysis of structural stability (local buckling phenomenon, global buckling, crippling) by classical hand calculation and FEM. Bolted joint hand calculations (bolt preload, joint stiffness, shear-tension interaction, insert pull-out, etc.) per NASA-STD-5020 Support internal/external design reviews, technical interchange meetings (TIMs), preliminary/critical design reviews (PDR/CDR) Desired Experience: Experience in one of the following discipline areas: Life Support System Design, Crew Systems Design, Crew Cabin Design, Mechanical Design, or Mechanical Analysis. Desired: Excellent understanding of fatigue and fracture mechanics principles, working knowledge of fatigue/fracture (AFGRO/NASGRO), spectra development, NDE methods, fail safe vs. safe life, NASA-STD-5019 Desired: Expertise in modeling and simulation of electronics components and associated failure Desired: Expertise with analysis of welded joints Desired: Expertise with mechanisms including bearings, valves, motors, rotating joints, gears. Desired: Experience in direct SolidWorks CAD manipulation for analysis model and team collaboration purposes. Minimum Qualifications: Bachelor's degree in mechanical, Bio-mechanical, Aerospace Engineering or equivalent field and 5-8 years Master's degree in Mechanical, Bio-mechanical, Aerospace Engineering or equivalent field and 4-6 years PhD degree in Mechanical, Bio-mechanical, Aerospace Engineering or equivalent field and 0-2 years US Citizen or US permanent resident

Move to Improve and bring the company forward An important part of the DOF culture is to learn from the experienced and skilled people we are so fortunate to recruit. If you feel that you can contribute and make us better, we promise you that we are always open to ideas and innovation. After all, it is the culture of innovation that has made DOF one of the most exciting places to work. In DOF you can make a difference in an environment ready to solve problems and implement good ideas quickly. And who knows? Perhaps you will learn something from your new colleagues, as well. We offer an exciting opportunity to be at very heart of developing efficient and modern finance, HR and business processes functions in a fast changing, dynamic industry - and plenty of opportunity to grow, apply your knowledge, skills and experience in DOF's core activities. We currently have an immediate job opportunity for a Lead Structural Design Engineer to join our team. The Lead Structural Design Engineer's purpose is to equip and lead the Design team to contribute technical expertise and experience across projects and tenders, providing guidance based on calculated results and analysis. Lead Structural Design Engineers' performance will be assessed via participation in an annual performance appraisal. Key measures are: * Elimination of design / project related safety incidents in DOF projects within the extent of your control. * Completion of project / tender deliverables within schedule and budget. * Minimal corrections required of externally issued deliverables. * Smooth delivery of work packages to the extent of your control. * Positive feedback from project teams, managers, OCMs and Clients. * Growth in personal technical and professional capability. * Growth of team capability. Lead Structural Design Engineers are expected to carry out the following work tasks: * Manage functional reports for the purpose of executing project or tendering works - including allocating work / progress monitoring / performance appraisals etc. * Review project Scope of Work and communicate it to all department functional reports. * Own and be responsible for delivery of discrete work packages as allocated by your functional and administrative managers, on time and in budget. * Report work-package status to direct department functional manager and assigned Project Manager. * Comply with contractual obligations and identify & document Contract / Commercial Variations associated with technical changes. * Research and compile DOF and Industry Lessons Learned relevant to assigned project or tendering work scopes to ensure best practice is being implemented. * Develop and maintain project Work Requests, Cost-Time-Resource estimates, and Criticality Ratings. * Liaise with Internal and External interfaces and stakeholders (client, subcontractors, supporting departments, technical authorities etc) to define methodology in accordance with best practice. * Develop, review and check technical documentation required for project or tendering specific deliverables - including Procedures/Plans/Reports/Technical Notes/Registers/schedules/RFQ's/BoDs/Specifications,etc. * Undertake simple engineering analysis and design - including Rigging Design / Seafastening Design / Lift & Installation Analysis etc. * Undertake complex engineering analysis and design - including Structural Design / Rigging Design / Hydrodynamic Analysis / Lift & Installation Analysis / Design of Installation Aids and / or Equipment etc. * Undertake the building and maintenance of the vessel hydrodynamic model library - including DOF Construction Vessel / Fixed & Floating Structures etc. * Undertake the building and maintenance of DOF in-house design software & tools - including Excel Spreadsheets / Calculations / MATHCAD etc. In addition to the above, which may be office-based, Lead Structural Design Engineers may, on occasion, be expected to: * Travel to, and stay at remote or offshore work sites/vessels for the purpose of executing project specific works - including Mobilisations / FATs / SITs / Audits & Inspections / Diving / Construction / Commissioning / IMR / Survey & Inspection / Decommissioning etc. * Liaise with internal and external interfaces or stakeholders (CSR / Subcontractors / MWS / OCM / SS / DF / Vessel Agents etc) to progress execution of on-site / offshore work - including logistics, distribution / comprehension of project procedures and standards, permits, etc. * Ensure technical compliance of on-site / offshore operations with DOF / Client AFC procedures & standards. * Develop documentation and facilitate processes required to progress execution of on-site / offshore work - including technical guidance / DPRs / Shift Logs / 24 Hour Updates / Management of Changes etc. * Monitor project equipment to confirm status, quantity, location and seafastening onboard the vessel are in compliance with DOF / Client AFC procedures, manifests and equipment lists. * Facilitate identification and implementation of lessons learnt / improvement opportunities for on-site / offshore operations. * Record and compile all records of technical data required to progress and close-out on-site / offshore works - including Task Plans / ITP's / Data Logs / Calibrations / Load-tests / Registers etc. It is also considered common practice for Lead Structural Design Engineers to: * Assemble and review all design inputs required to support specific projects or tendering works. * Develop and deliver technical presentations to support specific projects or tendering requirements - including Design Reviews / Method Statements / Constructability / Risk Assessments / Readiness Reviews / Project Briefing / Offshore Briefing etc. * Participate in technical workshops to support specific projects or tendering requirements - including Design Reviews / Method Statements / Constructability / RA's / Readiness Reviews etc. * Review subcontractor and supplier proposals and complete Technical / Commercial / Contractual evaluations against specific project or tendering requirements. On occasion Lead Structural Design Engineers may be required to: * Develop offshore execution and schedule strategies to support the specific project or tendering requirements. * Liaise between onshore project team and offshore vessel team to provide a technical interface during project planning - including deck services details / taking photos & measurements / performing trials etc. * Specify and manage the design / procurement / fabrication / cost-effectiveness / compliance / functionality of project equipment, rigging, tooling and consumables etc required for the execution of specific project or tendering work packages. * Manage major supplier / subcontractor packages. * Assemble installation records into technical deliverables required to close-out projects - including As-built Reports / Schedules / Lessons Learned & Project Summary Reports etc.

Job Description Move to Improve and bring the company forward An important part of the DOF culture is to learn from the experienced and skilled people we are so fortunate to recruit. If you feel that you can contribute and make us better, we promise you that we are always open to ideas and innovation. After all, it is the culture of innovation that has made DOF one of the most exciting places to work. In DOF you can make a difference in an environment ready to solve problems and implement good ideas quickly. And who knows? Perhaps you will learn something from your new colleagues, as well. We offer an exciting opportunity to be at very heart of developing efficient and modern finance, HR and business processes functions in a fast changing, dynamic industry - and plenty of opportunity to grow, apply your knowledge, skills and experience in DOF's core activities. We currently have an immediate job opportunity for a Lead Structural Design Engineer to join our team. The Lead Structural Design Engineer's purpose is to equip and lead the Design team to contribute technical expertise and experience across projects and tenders, providing guidance based on calculated results and analysis. Lead Structural Design Engineers' performance will be assessed via participation in an annual performance appraisal. Key measures are: · Elimination of design / project related safety incidents in DOF projects within the extent of your control. · Completion of project / tender deliverables within schedule and budget. · Minimal corrections required of externally issued deliverables. · Smooth delivery of work packages to the extent of your control. · Positive feedback from project teams, managers, OCMs and Clients. · Growth in personal technical and professional capability. · Growth of team capability. Lead Structural Design Engineers are expected to carry out the following work tasks: · Manage functional reports for the purpose of executing project or tendering works - including allocating work / progress monitoring / performance appraisals etc. · Review project Scope of Work and communicate it to all department functional reports. · Own and be responsible for delivery of discrete work packages as allocated by your functional and administrative managers, on time and in budget. · Report work-package status to direct department functional manager and assigned Project Manager. · Comply with contractual obligations and identify & document Contract / Commercial Variations associated with technical changes. · Research and compile DOF and Industry Lessons Learned relevant to assigned project or tendering work scopes to ensure best practice is being implemented. · Develop and maintain project Work Requests, Cost-Time-Resource estimates, and Criticality Ratings. · Liaise with Internal and External interfaces and stakeholders (client, subcontractors, supporting departments, technical authorities etc) to define methodology in accordance with best practice. · Develop, review and check technical documentation required for project or tendering specific deliverables - including Procedures/Plans/Reports/Technical Notes/Registers/schedules/RFQ's/BoDs/Specifications,etc. · Undertake simple engineering analysis and design - including Rigging Design / Seafastening Design / Lift & Installation Analysis etc. · Undertake complex engineering analysis and design - including Structural Design / Rigging Design / Hydrodynamic Analysis / Lift & Installation Analysis / Design of Installation Aids and / or Equipment etc. · Undertake the building and maintenance of the vessel hydrodynamic model library - including DOF Construction Vessel / Fixed & Floating Structures etc. · Undertake the building and maintenance of DOF in-house design software & tools - including Excel Spreadsheets / Calculations / MATHCAD etc. In addition to the above, which may be office-based, Lead Structural Design Engineers may, on occasion, be expected to: · Travel to, and stay at remote or offshore work sites/vessels for the purpose of executing project specific works - including Mobilisations / FATs / SITs / Audits & Inspections / Diving / Construction / Commissioning / IMR / Survey & Inspection / Decommissioning etc. · Liaise with internal and external interfaces or stakeholders (CSR / Subcontractors / MWS / OCM / SS / DF / Vessel Agents etc) to progress execution of on-site / offshore work - including logistics, distribution / comprehension of project procedures and standards, permits, etc. · Ensure technical compliance of on-site / offshore operations with DOF / Client AFC procedures & standards. · Develop documentation and facilitate processes required to progress execution of on-site / offshore work - including technical guidance / DPRs / Shift Logs / 24 Hour Updates / Management of Changes etc. · Monitor project equipment to confirm status, quantity, location and seafastening onboard the vessel are in compliance with DOF / Client AFC procedures, manifests and equipment lists. · Facilitate identification and implementation of lessons learnt / improvement opportunities for on-site / offshore operations. · Record and compile all records of technical data required to progress and close-out on-site / offshore works - including Task Plans / ITP's / Data Logs / Calibrations / Load-tests / Registers etc. It is also considered common practice for Lead Structural Design Engineers to: · Assemble and review all design inputs required to support specific projects or tendering works. · Develop and deliver technical presentations to support specific projects or tendering requirements - including Design Reviews / Method Statements / Constructability / Risk Assessments / Readiness Reviews / Project Briefing / Offshore Briefing etc. · Participate in technical workshops to support specific projects or tendering requirements - including Design Reviews / Method Statements / Constructability / RA's / Readiness Reviews etc. · Review subcontractor and supplier proposals and complete Technical / Commercial / Contractual evaluations against specific project or tendering requirements. On occasion Lead Structural Design Engineers may be required to: · Develop offshore execution and schedule strategies to support the specific project or tendering requirements. · Liaise between onshore project team and offshore vessel team to provide a technical interface during project planning - including deck services details / taking photos & measurements / performing trials etc. · Specify and manage the design / procurement / fabrication / cost-effectiveness / compliance / functionality of project equipment, rigging, tooling and consumables etc required for the execution of specific project or tendering work packages. · Manage major supplier / subcontractor packages. · Assemble installation records into technical deliverables required to close-out projects - including As-built Reports / Schedules / Lessons Learned & Project Summary Reports etc. Requirements Education: · Bachelor degree in Engineering (as a minimum) · Eligibility for membership of a national certifying institute (PE/EA/IMechE/RINA, etc.) Experience / Knowledge: · 10+ years of experience in offshore/subsea design engineering Lead Structural Design Engineers are expected to have a high-level understanding, detailed knowledge and experience, and be a promoter of: · DOF Policies, Code of Conduct and Values. · Hazard Identification and Risk Assessment tools and techniques. · DOF Unisea/IMS . · DOF Vessels' capabilities & systems, with particular focus on regionally based assets. Lead Structural Design Engineers are expected to have a working understanding and general knowledge and experience of: · Statutory requirements, HSE regulations, Industry codes & standards related to Offshore Engineering such as ABS / AS / API / DNV / AISC / IMCA etc. · Offshore Engineering principles. · Fundamentals of leadership / frontline management / negotiation / conflict management. · Commercial & contractual implications during engineering & operations phase. · Related departments: HR, Finance, marine, etc. Skills (social/technical) and Equipment: · Specialist Software packages such as CAD, Inventor, ANSYS, Orcaflex etc. · Microsoft packages - including Word / Excel / Project / PowerPoint / Teams etc. · Project Management Tools. · Promote DOF Values (Respect, Integrity, Teamwork, Excellence and Safety). · Promote a collegial, effective and inclusive work environment and team culture. · Be confident, self-motivated and self-disciplined with sound management and organisational skills. · Hold a high commitment to HSE & QA elements of Project Execution. · Have good technical skills and a systematic approach to problem solving. · Have good communication (written and verbal) and presentation skills. · Have good interpersonal skills and teamwork. · Have professional deportment to represent DOF at industry functions, to clients, etc. Benefits DOF Subsea is an equal opportunity employer dedicated to promoting a diverse workforce and an inclusive respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Successful candidates will be required to undergo pre-employment drug and alcohol screening and background screening as a part of the recruitment process. We encourage applications from all qualified individuals. We thank all applicants for their interest but only those selected for an interview will be contacted.

Analytical and design experience and knowledge of working within a design environment is essential for the position. A design engineer will work closely with other Design Engineers, Project Engineers, Designers, Manufacturing personnel, Vendors, Clients, Project Managers, and others. You will be using design and analysis software to create, improve, verify, and maintain designs in support of the Company's projects. You will also be involved in meetings relating to project planning and execution as required. Duties and Responsibilities: Create manifold and distribution structural designs to address project requirements. Define problems, drive analysis of problem areas, and create solutions. Assist with building prototypes and in validation through testing. Review customer's specifications and develop designs to meet those specifications. Review and check drawings for manufacture and for communication with the client. Create supporting design documentation. Perform order of magnitude and detailed analysis to evaluate and verify designs. Produce and maintain installation, operation, and maintenance manuals and guidelines. Produce consistent, complete, and accurate drawings of assemblies and components. Be familiar with Company HSE policies and procedures. Share knowledge across the company. Aggressively identify and champion best practices. Support the development of junior design personnel. All other duties as assigned Qualifications: Bachelor of Science in Mechanical Civil or Ocean Engineering and at least 5 years of engineering experience are required. Must be flexible and able to work autonomously as well as under direction. Extensive knowledge and experience with MS Office or similar software is required. Experience with CAD in generating solid models, drawings, and schematics is required. Experience with ANSYS, Autopipe, STAAD.pro, or similar in analyzing structural frames and piping systems. Extensive experience in structural frame weldments, manifolds and distribution equipment. Familiarity with relevant industry codes (API 6A/17D, 17P, RP -2A, 2GEO, DNV -RP -B401, ASME B31.8, B31.3 etc.). Familiarity with foundation design (mudmat or suction pile) is a plus. Strong interpersonal and communications skills, both verbal and written, are necessary. The ability to handle multiple projects and deadlines with changing priorities is necessary.

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Subject Matter Expert (SME) Stress Engineer who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Subject Matter Expert (SME) Stress Engineer to join Axiom's Lunar Terrain Vehicle (LTV) program in support of NASA's LTV Services (LTVS) contract in partnership with Astrolab. The role requires strong problem solving, organizational, time management, and communication skills. Experience in Extravehicular Activities (EVA) and Extravehicular Robotics (EVR) operations and hardware is desired. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract award. KEY DUTIES & RESPONSIBILITIES Working in a collaborative engineering team environment to produce crew interface structures. Performing classical and FEA (linear/non-linear statics, modal, frequency response, random response, explicit and implicit transient) analyses of flight hardware and other systems. Performing detailed calculations to ensure structural integrity of hardware for failure modes, including but not limited to static, fatigue, fracture, buckling, stability, and creep, and for mechanical joints such as welds and fasteners. Using appropriate analysis techniques, simplifications, assumptions, and experience-based judgements, to solve complex problems. Preparing and presenting technical reports, design documentation, and project updates to stakeholders. Performing additional job duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Bachelor's or master's degree in STEM from an accredited institution 10-15 years of experience in structural or mechanical engineering, or related field Strong mechanical design, integration, and mechanism analysis skills using 3D modeling and simulation tools; i.e. SolidWorks preferred Experience with NX (Simcenter)/NASTRAN finite element modeling or equivalent Experience with Fracture Mechanics and Damage Tolerance Analysis Familiarity with implementation of NASA Standards, Federal Standards, and/or DOD Standards Experience developing spaceflight hardware structures and mechanisms Grit Passion for space and the mission Entrepreneurial, growth mindset Perseverance Resourceful, adaptable Skills Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

Pipe Stress Engineer CDI Site Team located in Deer Park, Texas offering competitive pay, benefits and more! The Pipe Stress Engineer role is mainly responsible for the evaluation, analysis, and recommendation for the piping scope on refinery or petrochemical EPCM projects. Knowledge in static equipment design is a plus. The position is geared towards mid-level engineers willing to work under supervision of a Lead Engineer. Job Qualifications & Skills: 7 Years + of applicable experience in Refinery, Petrochemical, and/or EPC Industries. Strong knowledge of industry codes and standards (including API 610, API 650, API 660, API 661, ASME B31.3, ASME BPVC, etc.) Proficient with CAESAR II, FE/Pipe, NozzlePro Ability to conduct a field trip to an operating plant. This requires normal hearing, the ability to stand, walk, reach, climb, clear close and distance vision, depth perception and the ability to focus. Lifting up to 25 pounds may be required. Bachelor's Degree in Mechanical Engineering. TWIC A MUST Job Responsibilities & Accountabilities: Develop piping flexibility and stress reports with CAESAR II Software. Prepare calculations to address issues such as two phase flow, water hammer, cyclic service, differential settlement, wind, seismic, PSV thrust force, etc. Perform FEA evaluation of stresses at nozzles, or for determining user calculated SIFs, using NozzlePro, FE/Pipe or other FEA software. Identify critical lines requiring pipe stress analysis, review line list to ensure adequate level of criticality is defined, make sound engineering judgements on existing pipe that interacts with project scope. Estimate man-hours and participate in the development of the project schedule, track reporting status, maintain completion of deliverables on schedule and change management. Produce detailed analysis reports ensuring compliance with industry/client codes, work processes, and standards. Experience in static equipment design is a plus (vessels and tanks). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. CDI Corporation is an EEO/An Affirmative Action M/F/D/V Employer. APPLY TODAY!

Communities everywhere share the need for clean water. And as they work to meet that need, they're facing new, more complex challenges every day. Our water professionals collaborate to contribute innovative ideas, guided by scientific rigor and a vision for sustainable growth. Every day, we're helping communities improve, reuse, and protect our world's most precious resource. Join our team to deliver transformational projects that will benefit future generations. Grow with us, H2O+U. Your Opportunity Stantec's Water practice has a unique opportunity for a Civil Engineer with experience in civil, water/wastewater, municipal utility, or water resources engineering to join our team in Houston, TX. This role will support City of Houston wastewater projects in a full-time staff augment position located at city offices. The role of the Civil Engineer would include managing on-going and planned design contracts, reviewing, evaluating and/or designing sub-systems and product, material, and equipment specifications. You will perform a variety of tasks which may include preparing calculations, conducting field work, coordinating simple tasks, and preparing meeting documentation. Your Key Responsibilities * Support the project team in the development of design plans and specifications for a variety of water/reclaimed water/wastewater distribution and collection systems, and wastewater treatment projects primarily for public municipal clients * Assist with the review and/or preparation of detailed engineering studies, technical and infrastructure planning reports, hydraulic models and design tasks associated with municipal distribution and collection systems, and related facilities * Perform quality reviews of documents in various phases of design development including engineering calculations, design reports, and construction plans. * Assist in the evaluation and selection of civil systems, equipment, and materials. * Support senior staff in review and preparation of project cost estimates and participate in value engineering exercises. * Review and manage the preparation, revision, and coordination of permit applications and documentation for utility, environmental, and municipal permits through local, state and federal jurisdictions; respond to requests for additional information, and monitor and report status of various permit submittals * Attend and participate in project meetings with internal team members and/or external consultants. * Attend and participate in meetings with clients, municipal officials, and contractors to review project needs * Take sufficient notes at meetings to document discussions and organize follow-up action items. * Coordinate and keep consistent communication with other project team disciplines to ensure entire design team has same design intent and is on schedule * Support construction projects with periodic field site visits, construction observation, and witnessing utility testing * Assist in the review of contractor shop drawings and submittals, respond to request for information, prepares site observation reports, and performs other construction administration tasks * Prepared to step in and assist with any of the project teams tasks in order to complete projects on time, on budget, and with quality design Your Capabilities and Credentials * Be a self-motivated individual, possessing strong interpersonal and communication skills, both written and verbal, along with the ability to prioritize multiple tasks * Candidate must have strong technical writing abilities * Experience with design of wastewater treatment, collection and pumping infrastructure is preferred * Familiarity with collaborative project delivery methods is a plus. * Technical knowledge in water, sewer and drainage projects is plus * Familiarity with Microsoft Office Suite, AutoCAD Civil 3D, ArcGIS Mapping is a plus and willingness to learn relevant software such as WaterCAD, SewerCAD, StormCAD, etc. Education and Experience * Must have Bachelor's of Science degree in Civil or Environmental engineering * 5--8 years of experience in civil, environmental and or water resources arena * Licensed engineer in the state of Texas or ability to obtain within a year from hire date Must have a valid driver's license Typical office environment working with computers and remaining sedentary for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | TX | Houston Organization: BC-1773 Water-US Gulf Employee Status: Regular Travel: No Schedule: Full time Job Posting: 16/06/2025 05:06:58 Req ID: REQ250000QK Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

We seek a highly motivated and skilled water/wastewater civil engineer to join our team. As an Engineer III, you will assist in analyzing, designing, and managing the construction of water and wastewater treatment, pumping, and collection systems. This is an excellent opportunity to apply your engineering knowledge in a practical and impactful way, contributing to the development of sustainable and resilient communities. Job Summary Engineer III, under general supervision assists with engineering system design during all phases of multiple, simultaneous projects by performing design calculations, specifications, interpreting and preparing reports, applying techniques and procedures, preparing cost estimates, impact studies, permits and designs/deliverable drawings. Job Responsibilities * Manages and perform system design, including calculations, equipment selection, layout, and drawing preparation. * Develops and reviews project documents, specifications, and design options; ensures code compliance through meetings and reviews. * Conduct site investigations and technical research to support design decisions. * Coordinates with technicians and staff; assign tasks and checks work for accuracy. * Apply standard engineering practices and software tools to produce high-quality deliverables. * Demonstrates working knowledge of relevant codes and design standards. * Build and develop internal and external relationships Requirements Required Education & Experience * Bachelor's degree in Engineering Preferred Education & Experience * 2 - 6 years' experience * Engineer-in-Training/Fundamentals of Engineering (EIT) * Understanding of concepts of wastewater treatment and collection systems. * Understanding of closed-pipe and open-channel and hydraulics. * AutoCAD Civil 3D experience preferred. * Revit and ArcGIS software experience is a plus. * Valid driver's license and reliable transportation to perform site visits. * Previous intern experience relating to wastewater is highly preferred. Lockwood, Andrews & Newnam, Inc. (LAN) is an Equal Opportunity Employer and gives consideration for employment to qualified applicants for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Lockwood, Andrews & Newnam, Inc., is committed to ensuring equal employment opportunity, including providing reasonable accommodations to individuals with a disability. Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may contact the Human Resources Department at ************. For more information about your rights under the law, see Know Your Rights

Move to Improve and bring the company forward An important part of the DOF culture is to learn from the experienced and skilled people we are so fortunate to recruit. If you feel that you can contribute and make us better, we promise you that we are always open to ideas and innovation. After all, it is the culture of innovation that has made DOF one of the most exciting places to work. In DOF you can make a difference in an environment ready to solve problems and implement good ideas quickly. And who knows? Perhaps you will learn something from your new colleagues, as well. We offer an exciting opportunity to be at very heart of developing efficient and modern finance, HR and business processes functions in a fast changing, dynamic industry - and plenty of opportunity to grow, apply your knowledge, skills and experience in DOF's core activities. We currently have an immediate job opportunity for a Lead Structural Design Engineer to join our team. The Lead Structural Design Engineer's purpose is to equip and lead the Design team to contribute technical expertise and experience across projects and tenders, providing guidance based on calculated results and analysis. Lead Structural Design Engineers' performance will be assessed via participation in an annual performance appraisal. Key measures are: · Elimination of design / project related safety incidents in DOF projects within the extent of your control. · Completion of project / tender deliverables within schedule and budget. · Minimal corrections required of externally issued deliverables. · Smooth delivery of work packages to the extent of your control. · Positive feedback from project teams, managers, OCMs and Clients. · Growth in personal technical and professional capability. · Growth of team capability. Lead Structural Design Engineers are expected to carry out the following work tasks: · Manage functional reports for the purpose of executing project or tendering works - including allocating work / progress monitoring / performance appraisals etc. · Review project Scope of Work and communicate it to all department functional reports. · Own and be responsible for delivery of discrete work packages as allocated by your functional and administrative managers, on time and in budget. · Report work-package status to direct department functional manager and assigned Project Manager. · Comply with contractual obligations and identify & document Contract / Commercial Variations associated with technical changes. · Research and compile DOF and Industry Lessons Learned relevant to assigned project or tendering work scopes to ensure best practice is being implemented. · Develop and maintain project Work Requests, Cost-Time-Resource estimates, and Criticality Ratings. · Liaise with Internal and External interfaces and stakeholders (client, subcontractors, supporting departments, technical authorities etc) to define methodology in accordance with best practice. · Develop, review and check technical documentation required for project or tendering specific deliverables - including Procedures/Plans/Reports/Technical Notes/Registers/schedules/RFQ's/BoDs/Specifications,etc. · Undertake simple engineering analysis and design - including Rigging Design / Seafastening Design / Lift & Installation Analysis etc. · Undertake complex engineering analysis and design - including Structural Design / Rigging Design / Hydrodynamic Analysis / Lift & Installation Analysis / Design of Installation Aids and / or Equipment etc. · Undertake the building and maintenance of the vessel hydrodynamic model library - including DOF Construction Vessel / Fixed & Floating Structures etc. · Undertake the building and maintenance of DOF in-house design software & tools - including Excel Spreadsheets / Calculations / MATHCAD etc. In addition to the above, which may be office-based, Lead Structural Design Engineers may, on occasion, be expected to: · Travel to, and stay at remote or offshore work sites/vessels for the purpose of executing project specific works - including Mobilisations / FATs / SITs / Audits & Inspections / Diving / Construction / Commissioning / IMR / Survey & Inspection / Decommissioning etc. · Liaise with internal and external interfaces or stakeholders (CSR / Subcontractors / MWS / OCM / SS / DF / Vessel Agents etc) to progress execution of on-site / offshore work - including logistics, distribution / comprehension of project procedures and standards, permits, etc. · Ensure technical compliance of on-site / offshore operations with DOF / Client AFC procedures & standards. · Develop documentation and facilitate processes required to progress execution of on-site / offshore work - including technical guidance / DPRs / Shift Logs / 24 Hour Updates / Management of Changes etc. · Monitor project equipment to confirm status, quantity, location and seafastening onboard the vessel are in compliance with DOF / Client AFC procedures, manifests and equipment lists. · Facilitate identification and implementation of lessons learnt / improvement opportunities for on-site / offshore operations. · Record and compile all records of technical data required to progress and close-out on-site / offshore works - including Task Plans / ITP's / Data Logs / Calibrations / Load-tests / Registers etc. It is also considered common practice for Lead Structural Design Engineers to: · Assemble and review all design inputs required to support specific projects or tendering works. · Develop and deliver technical presentations to support specific projects or tendering requirements - including Design Reviews / Method Statements / Constructability / Risk Assessments / Readiness Reviews / Project Briefing / Offshore Briefing etc. · Participate in technical workshops to support specific projects or tendering requirements - including Design Reviews / Method Statements / Constructability / RA's / Readiness Reviews etc. · Review subcontractor and supplier proposals and complete Technical / Commercial / Contractual evaluations against specific project or tendering requirements. On occasion Lead Structural Design Engineers may be required to: · Develop offshore execution and schedule strategies to support the specific project or tendering requirements. · Liaise between onshore project team and offshore vessel team to provide a technical interface during project planning - including deck services details / taking photos & measurements / performing trials etc. · Specify and manage the design / procurement / fabrication / cost-effectiveness / compliance / functionality of project equipment, rigging, tooling and consumables etc required for the execution of specific project or tendering work packages. · Manage major supplier / subcontractor packages. · Assemble installation records into technical deliverables required to close-out projects - including As-built Reports / Schedules / Lessons Learned & Project Summary Reports etc. Requirements Education: · Bachelor degree in Engineering (as a minimum) · Eligibility for membership of a national certifying institute (PE/EA/IMechE/RINA, etc.) Experience / Knowledge: · 10+ years of experience in offshore/subsea design engineering Lead Structural Design Engineers are expected to have a high-level understanding, detailed knowledge and experience, and be a promoter of: · DOF Policies, Code of Conduct and Values. · Hazard Identification and Risk Assessment tools and techniques. · DOF Unisea/IMS . · DOF Vessels' capabilities & systems, with particular focus on regionally based assets. Lead Structural Design Engineers are expected to have a working understanding and general knowledge and experience of: · Statutory requirements, HSE regulations, Industry codes & standards related to Offshore Engineering such as ABS / AS / API / DNV / AISC / IMCA etc. · Offshore Engineering principles. · Fundamentals of leadership / frontline management / negotiation / conflict management. · Commercial & contractual implications during engineering & operations phase. · Related departments: HR, Finance, marine, etc. Skills (social/technical) and Equipment: · Specialist Software packages such as CAD, Inventor, ANSYS, Orcaflex etc. · Microsoft packages - including Word / Excel / Project / PowerPoint / Teams etc. · Project Management Tools. · Promote DOF Values (Respect, Integrity, Teamwork, Excellence and Safety). · Promote a collegial, effective and inclusive work environment and team culture. · Be confident, self-motivated and self-disciplined with sound management and organisational skills. · Hold a high commitment to HSE & QA elements of Project Execution. · Have good technical skills and a systematic approach to problem solving. · Have good communication (written and verbal) and presentation skills. · Have good interpersonal skills and teamwork. · Have professional deportment to represent DOF at industry functions, to clients, etc. Benefits DOF Subsea is an equal opportunity employer dedicated to promoting a diverse workforce and an inclusive respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Successful candidates will be required to undergo pre-employment drug and alcohol screening and background screening as a part of the recruitment process. We encourage applications from all qualified individuals. We thank all applicants for their interest but only those selected for an interview will be contacted.

This position will function as a technical specialist and/or lead role to execute the piping engineering scope for refinery/petrochemical EPCM projects. The role will require a valid Texas PE license and will be the responsible person to PE seal piping engineering deliverables. This position will apply advanced engineering skills to troubleshoot problems with minimal supervision. Job Responsibilities: Develop piping flexibility and stress reports with CAESAR II Software. Prepare calculations to address issues such as two-phase flow, water hammer, cyclic service, differential settlement, wind, seismic, PSV thrust force, etc. Perform FEA evaluation of stresses at nozzles, or for determining user calculated SIFs, using NozzlePro, FE/Pipe or other FEA software. Identify critical lines requiring pipe stress analysis, review line list to ensure adequate level of criticality is defined, make sound engineering judgements on existing pipe that interacts with project scope. Estimate man-hours and participate in the development of the project schedule, track reporting status, maintain completion of deliverables on schedule and change management. Produce detailed analysis reports ensuring compliance with industry/client codes, work processes, and standards. Participate in reviews of PFD's, P&ID's, Piping ISOs, & Structural Drawings. Provide engineering support by answering technical questions and requests. Review and resolve interdisciplinary design and technical issues to ensure the most effective and efficient design is selected. Manage multiple fast-paced projects at once and be adaptive to change. Ability to travel to site, as required, for project needs, client meetings, field walks, etc. Supervise and direct a team from our HVEC office overseas. Assist with development of department work instructions and technical guidelines. Interface with the client on a daily basis and represent the CDI Mechanical Dept. at the client site. Job Qualifications: 15 Years + of applicable experience in Refinery, Petrochemical, and/or EPC Industries. Texas PE License required. Strong knowledge of industry codes and standards (including API 610, API 650, API 660, API 661, ASME B31.3, ASME BPVC, etc.). Proficient with CAESAR II, FE/Pipe, NozzlePro. Ability to conduct a field trip to an operating plant. This requires normal hearing, the ability to stand, walk, reach, climb, clear close and distance vision, depth perception and the ability to focus. Lifting up to 25 pounds may be required. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. CDI Corporation is an EEO/An Affirmative Action M/F/D/V Employer. APPLY TODAY!

Axiom Space is building the world's first commercial space station - Axiom Station. Serving as a cornerstone for sustained human presence in space, this next-generation orbital platform fosters groundbreaking innovation and research in microgravity, and cultivates the vibrant, global space economy of tomorrow. Today, driven by the vision of leading humanity's journey off planet, Axiom Space is the principal provider of commercial human spaceflight services to the International Space Station and developer of advanced spacesuits for the Moon and low-Earth orbit. Axiom Space is building era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Modeling and Simulation Engineer who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Modeling and Simulation Engineer to support the EVA SE&I team. The EVA SE&I Modeling and Simulation Engineer will develop the modeling and simulation assets that assess the performance of the EVA spacesuit for analysis and verification purposes. KEY DUTIES & RESPONSIBILITIES Develop high-fidelity space suit fluid, thermal, and electrical simulation math models leveraging existing simulation frameworks and nodal analysis methods (NASA's Trick simulation and GUNNS software). Collaborate with space suit subsystem teams to ensure models accurately reflect design and operational details of life support components. Ensure model packages are debugged, tested, verified, and validated with test data. Incorporate models into the larger simulation framework and work to ensure simulation runs appropriately. Apply systems engineering principles to the development and documentation of the simulation framework and constituent models. Use the simulation to evaluate spacesuit performance, perform trade studies, and assess design changes. Use simulation to perform verification of system requirements. Generate and deliver regular reports on the status of space suit design. Support other Systems Engineering and Integration functions as appropriate and needed. Communicating project progress, status, and potential issues to stakeholders and leadership. Implementing and maintaining agile project management methodologies throughout the project lifecycle. Perform additional job duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Bachelor's degree, Engineering, Math, Science, or related field required (MS preferred) A minimum of 10 years of professional experience or educational equivalent Experience with design and implementation or modeling and simulation of fluid, thermal, or electrical systems 2 years of programming experience with systems level languages like C/C++ and/or Python Strong oral and written communication skills Ability to present technical data to a broad range of technical and non-technical audiences Track record of delivering outcomes in ambiguous, fast-moving environments Uses good judgement to problem-solve proactively, positively impacting hard challenges Proven to deliver high quality results under tight deadlines Grit Passion for space and the mission Entrepreneurial, growth mindset Perseverance Resourceful, adaptable Skills Technical expertise in: Programming languages like C++ and python Object-Orient Programming (OOP) principles and software architecture design, ideally in modeling and simulation contexts Experience with nodal analysis techniques for modeling and simulating systems such as fluid, thermal, or electrical power systems Experience with UML, SysML modeling tools, version control systems (Git, GitLab) Experience using modeling and simulation to perform design trades and performance assessments for complex systems. Demonstrated experience in code debugging, troubleshooting, and applying security best practices within Agile methodology Strong understanding of software verification, validation, and documentation practices Experience with NASA's Trick Simulation Framework and / or General-Use Nodal Network Solver (GUNNS) is highly desired. Experience developing GUI applications is desired Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.