Substations electrical engineer work from home jobs

Direct Hire 100% Remote We are seeking an Imaging Hardware Systems Engineer to design, implement, and optimize the camera, sensor, optical, and lighting components that form the foundation of advanced computer vision and machine vision applications. This role involves building high-quality imaging environments that enable reliable automated inspection across industrial settings. The position is remote, with up to 50% travel for on-site scoping, installation, and commissioning. Key Responsibilities Design and configure camera, lens, filter, and lighting systems to support robust and repeatable imaging for automated inspection. Perform illumination analysis using advanced lighting strategies (backlights, dome lights, ring lights, structured light, etc.) to improve feature contrast and reduce imaging artifacts. Evaluate and select machine vision cameras and sensors (CMOS, CCD) based on application requirements such as resolution, sensitivity, and frame rate. Develop mechanical designs-including mounts, brackets, and enclosures-ensuring imaging hardware is stable and reliable in active industrial environments. Produce engineering documentation, layouts, and schematics using SolidWorks or comparable CAD tools. Collaborate closely with vision engineers, controls/automation personnel, and plant operations teams to ensure seamless system integration. Oversee contractors and vendors responsible for fabricating and installing imaging hardware solutions. Troubleshoot and optimize imaging systems by addressing lighting inconsistencies, focus issues, vibration, or sensor configuration problems. Lead field installation efforts, support commissioning activities, and fine-tune imaging and lighting performance during deployment. Establish hardware standards, best practices, and documentation for scalable and repeatable systems. Develop preventive maintenance procedures for imaging hardware and partner with plant teams to ensure consistent upkeep. Implement automated monitoring tools for camera and lighting performance, setting thresholds and alerts for early detection of degradation. Stay current with evolving imaging technologies, optical components, and illumination methodologies to enhance system capability over time. Preferred Qualifications Bachelor's degree in Electrical Engineering, Mechanical Engineering, Optical Engineering, Physics, Computer Vision, or related discipline; or 8+ years of relevant hands-on hardware engineering experience. Practical expertise with machine vision cameras, optics, filters, and industrial lighting solutions. Knowledge of illumination techniques for challenging surfaces (reflective, textured, curved, low contrast). Proficiency with SolidWorks or equivalent CAD tools for mechanical design and documentation. Experience designing mechanical fixtures, mounts, or housings for imaging hardware in existing production environments. Track record of deploying and tuning camera and lighting systems in industrial or manufacturing settings. Strong understanding of optics, imaging theory, and sensor properties. Ability to collaborate with software and machine learning engineers to align imaging hardware with algorithmic requirements. Experience troubleshooting imaging systems in the field. Proven ability to coordinate external partners for fabrication and installation work. Background in machining, fabrication, or custom hardware integration. Familiarity with commercial machine vision software platforms. Understanding of image quality metrics and measurement system analysis. Experience with edge devices or embedded systems for real-time imaging. Project management experience related to scoping and delivering hardware deployments. Estimated Min Rate: $105000.00 Estimated Max Rate: $150000.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Actalent Services, LLC connects passion with purpose. We are supporting critical engineering and sciences initiatives that advance how companies serve the world. With almost 40 years of experience, our scalable talent solutions and engineering and sciences services provide the expertise our customers need to achieve more. The position falls within the substation department of the organization. The engineer will work to complete projects that support our utility customer with minimum direction. They will work with in-house and client engineers and designers. They will provide training and guidance to lower-level engineers. Primary Duties and Responsibilities * Develop project scopes, one-line diagrams, and estimates for substation projects * Review substation construction drawings such as electrical arrangements, plan and section views, grounding, cable and conduit drawings, and other project documents and verify compliance with appropriate codes and standards * Engineer and design lightning protection, grounding, and equipment replacement and repair for substations * Make necessary changes and corrections to drawings and documentation * Verify the proper use of equipment and material according to project documentation standards and codes * Verify that material and equipment are ordered and delivered on time for substation construction * Travel to project sites for walk downs and gathering information to develop the correct requirements for the projects to scope and develop substations * Function as a project lead for substation projects * Lead, facilitate, and coordinate work activities of others within the work group, team, department, or those external to complete substation projects * Provide training and guidance to lower-level employees * Identify and initiate corrective action when substation project objectives are not being met * Interpret codes and regulations and develop standards for construction projects * Promote engineering professionalism and standards * Develop, recommends, and implement plans by establishing goals, objectives, and requirements that include all scheduling, resources, and cont information for complex engineering * Position will require occasional site visits Education and Experience Requirements * Minimum of nine years of experience in utilities working with substations * Minimum of nine years of experience completing engineering projects from start to finish * Minimum of nine years of experience scoping, estimating, and ordering materials for substations * Bachelor's Degree in Electrical Engineering from an accredited institution * Master's Degree in Electrical Engineering from an accredited institution will count toward years of experience * A PE License is required Requisite Skills and Abilities * Advanced ability to perform design calculations such as battery sizing, AC and DC loads, system component selection, power transformer and circuit breaker selection, circuit protection, control and power cable selection and rating, bus bars, fittings, insulators, ground grid design, and lightning protection * Possess advanced knowledge of standards and codes such as IEEE, ANSI, NEC and NESC * Advanced understanding of equipment, material, ordering, and bills of material for substation construction * Strong written and verbal communication * Advanced ability to understand interrelationship between systems and component equipment * Stay abreast of new products, developments, technologies, procedures, and equipment Job Type & Location This is a Contract position based out of Chicago, IL. Pay and Benefits The pay range for this position is $64.90 - $76.92/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Dec 19, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

SOLV Energy is an engineering, procurement, construction (EPC) and solar services provider for utility solar, high voltage substation and energy storage markets across North America. The Substation Engineer is responsible for the design, implementation, and testing of electrical substation, ensuring they meet safety standards, operational requirements, and project specifications. The Substation Engineer should have a solid understanding of power systems, substation equipment, and relevant industry standards. This role is fully remote. Specific location details and expectations will be discussed during the interview process. : *This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned Position Responsibilities and Duties: Review electrical substations, including layout, equipment selection, and equipment specifications in accordance with project requirements and industry standards. Review load flow, short circuit, and relay coordination studies to ensure the reliability and efficiency of substation designs. Prepare/Review detailed engineering drawings, schematics, and technical specifications using AutoCAD electrical or Bluebeam. Coordinate with internal and external stakeholders, including utility companies, contractors, and regulatory agencies to obtain approvals and permits for substation projects. Review and evaluate vendor proposals for technical accuracy to specifications for substation components. Identify opportunities for design upgrades, improvements, or provide value engineering solutions. Provide technical support during the construction, testing, and commissioning of new substations, ensuring compliance with project schedules and quality standards. Troubleshoot and resolve technical issues related to substation equipment and systems, both remotely and on-site. Perform root cause analysis and recommend corrective actions for substation failures. Stay informed about emerging technologies and best practices in substation design, automation, and protection systems. Assist in the development of standards, procedures, and guidelines for substation engineering activities. Collaborate with cross-functional teams, including transmission planners, protection engineering, control systems specialists, PV engineering, and BESS engineering to ensure the seamless integration of substations into the overall power grid. Participate in safety audits and inspections to identify and mitigate potential hazards in substation facilities. Assist with mentoring junior engineers, technicians, and peers providing guideance, training, and lessons learned on substation design principles and practices. Maintain accurate documentation and records of substation designs and modifications. Participate in team meetings/calls regularly Demonstrate and maintain a safe work environment and direct safe work practices in energized substations. Complete other responsibilities as assigned. Ability to travel as needed (~%10) Minimum Skills or Experience Requirements Bachelor's degree in electrical engineering or related field; master's degree preferred. 3-4+ years in substation design, construction, or maintenance. Solid understanding of power systems, including transmission, distribution, and generation. Proficiency in engineering software tools such as ETAP, SKM, or PSS/E for power system analysis. Familiarity with protection relay programming, coordination studies, and simulation software (e.g., SEL, GE Enervista). Familiarity with relevant indstry standards and codes, such as IEEE, ANSI, and NESC. Proficient technical skills in substation layout, equipment sizing, and protection coordination. Excellent communication and interpersonal skills with the ability to work effectively in a team environment (local and remote). Detail-oriented with strong problem-solving abilities and a commitment to quality. Ability to manage multiple projects simultaneously and prioritize tasks to meet deadlines. Willingness to pursue licensure is a plus. SOLV Energy Is an Equal Opportunity Employer At SOLV Energy we celebrate the power of our differences. We are committed to building diverse, equitable, and inclusive workplaces that improve our communities. SOLV Energy prohibits discrimination and harassment of any kind against an employee or applicant based on race, color, age, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, or ethnicity, mental or physical disability, veteran status, parental status, or any other characteristic protected by law. Benefits: Employees (and their families) are eligible for medical, dental, vision, basic life and disability insurance. Employees can enroll in our company's 401(k) plan and are provided vacation, sick and holiday pay. Compensation Range: $98,400.00 - $123,000.00 Pay Rate Type: Salary SOLV Energy does not accept unsolicited candidate introductions, referrals or resumes from third-party recruiters or staffing agencies. We require all third-party recruiters to communicate exclusively with our internal talent acquisition team. SOLV Energy will not pay a placement fee to any third-party recruiter or agency that has not coordinated their recruiting activity with the appropriate member of our internal talent acquisition team. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Any unsolicited candidate introductions, referrals or resumes sent by third-party recruiters to SOLV Energy or directly to any of our employees, or received through our website or career portal, will be considered property of SOLV Energy and will not be eligible for a placement fee. In the event a third-party recruiter submits a resume or refers a candidate without a previously signed vendor agreement, SOLV Energy explicitly reserves the right to pursue and hire the candidate(s) without financial liability to such third-party recruiter. #LI-Remote Job Number: J12244 If you're interested in a meaningful career with a brighter future, join the SOLV Energy Team.

We are seeking a skilled Substation Engineer to join our power delivery engineering team. The Substation Engineer will be responsible for the design, analysis, and implementation of high-voltage substation projects ranging from 69kV to 500kV. The ideal candidate will have hands-on experience with substation layout, equipment selection, protection and control systems, and integration with transmission and distribution systems.This role involves collaboration across multiple disciplines-including civil, structural, and protection engineering-to ensure high-quality, cost-effective, and reliable designs that meet client and industry standards. Locations Available (Mostly Onsite):- Raleigh, NC- Charlotte, NC- Owings Mills, MD- Summerville, SC- Katy, TX- Baton Rouge, LAResponsibilities: Develop substation physical and electrical designs, including one-line diagrams, three-line diagrams, general arrangements, grounding, conduit, and control schematics. Prepare design drawings, technical specifications, and bill of materials for new and retrofit substation projects. Conduct equipment selection and specify transformers, circuit breakers, switches, buswork, relays, and other substation components. Collaborate with Protection & Control Engineers to integrate relaying and communication systems. Perform load flow, short circuit, and grounding studies as needed. Ensure all engineering deliverables meet NESC, IEEE, ANSI, IEC, and utility standards. Coordinate with internal design teams, utilities, and contractors to ensure technical accuracy and constructability. Participate in site visits to support design verification, construction, and commissioning. Provide technical support during procurement, installation, and testing phases. Maintain project schedules, budgets, and documentation per client and company requirements.

Leidos Engineering has an opportunity for a Substation Engineer to join our fast-paced and dynamic EPC Solutions organization. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including: Project Management Professional (PMP) Formal Mentorship programs Developmental Leadership training Technical Upskilling Oppportunities Management opportunities As a Substation Engineer (EPC), you can expect to: Perform Physical Electrical, Protection and Control, SCADA Systems, Station Communications and Station Automation design on small to medium sized utility substation engineering projects with medium complexity. Perform medium to advanced complexity engineering calculations to support engineering design. Read and design substation physical drawings such as operation one-line drawings, electrical plan and section drawings, foundation layouts, grounding layouts and details, Conduit layouts and details. Assist senior engineers with engineering studies. Prepare project deliverables including but not limited to engineered drawings, technical reports, project-related correspondence and miscellaneous project documentation. Collaborate with other engineering disciplines as required. Should be able to assess the impacts of design changes on other disciplines to pick the best solution. Perform Quality Control reviews on smaller projects. Prepare portions of smaller proposals under the direction of project engineers. Provide drawing counts and manhour estimates for small to medium sized projects. Assist the team with the development of processes and procedures to improve project execution efficiency. Maintain accurate records and files and a high level of organization. Take opportunities to improve technical knowledge and understanding of the work. Develop and provide moderate complexity technical presentations to the team to assist with training and staff development. Assist project engineer with project-related technical support to field personnel during construction. Support Leidos' goals and represent the company positively and professionally. Required Qualifications: B.S. degree in an Engineering discipline from an ABET accredited university (Electrical preferred) 2+ years of prior relevant experience in utility substation design with a B.S. degree OR 1+ years of prior relevant experience in utility substation design with a M.S. degree Familiarity with electric infrastructure and the theories and principles involved in substation engineering. Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software). Competency in applying basic theories and principals involved in substation engineering. Experience with Engineering, Procurement & Construction turnkey projects for electric utilities is strongly preferred Preferred Experience/Qualifications: Proficiency with Bentley ProjectWise data management system. Engineer In Training (EIT) Understanding of the function and application of major substation electrical and control house equipment Understanding of the importance of quality and quality control in power/consulting industry. Ability to meet deadlines under high pressure situations. Candidates must be located in the United States in order to be considered, as this role cannot be performed from outside of the US. Please Note that Sponsorship and other immigration related monetary benefits are not available for this position. At Leidos, We pride ourselves on being a trusted and technology-focused solutions provider. Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDS Substation PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. Original Posting:September 23, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $69,550.00 - $125,725.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Secondary Locations Job Code **19168** \# of openings **2** Apply Now (**************************************************** Requisition?org=POWERENGINEERS&cws=44&rid=19168) **Entry-Level Substation Electrical Engineer** **This Opportunity** POWER Engineers, Member of WSP, is currently initiating a search for an Entry-Level Substation Electrical Engineer for our Hilo, Hawaii location. Be involved in projects with our Power Delivery Substation Team and be a part of a growing organization that meets our clients' objectives and solves their challenges. **Your Impact** The Electrical Engineer will share responsibility with the rest of the department to produce a product consistent with POWER's mission statement and culture. They are expected to support the department in achieving the department's goals, maintain POWER's high-quality standards, promote internal teamwork and meet the needs of our clients. - Perform the detailed design of low to extra high voltage substations including, but not limited to: - One-line diagrams - Station physical layouts - Sections/Elevations - Cable and conduit plans and details - Ground grid design and details - Foundation plans - Structural plans - Control enclosure design and details - Lightning protection plans - Yard lighting plans - Schematics - Wiring diagrams - SCADA - Communications - Cable and conduit plans and details - Control enclosure design and details - Bills of Materials - Site visits - Support QA/QC for deliverables to clients. - Shall learn, understand, and adhere to client standards and processes while working individually or within a team to complete complex and technically challenging designs. - Exercise responsible and ethical decision-making regarding company funds, resources, and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. - Perform additional responsibilities as required by business needs. - The successful candidate will be involved in all aspects of transmission line design for new lines, relocations, upgrades, and fiber optic additions. **Who You Are** **Required Qualifications** - BSEE (BS Electrical Engineering), BSME (BS Mechanical Engineering), or BSEET (BS Electrical Engineering Technology) degree, preferably with a power option from an accredited university. - Strong knowledge and understanding of electrical engineering to build on. - The candidate must have a strong command of the English language with good written and oral communication skills to work effectively with internal team members and external client personnel. - Candidates should enjoy living in the Hilo area, or have a desire and ability to relocate there with minimal assistance. - Candidates must be willing and able to work effectively and efficiently in a remote work environment when required. - Candidates must be legally authorized to work permanently in the U.S. without the need for work sponsorship. - Occasional travel may be required depending on project-specific requirements. + 0-1 years of experience **Preferred Qualifications** - At least three months relevant electrical engineering work experience; could be on an internship or co-op basis. - Minimum 2.5 Grade Point Average (GPA). - Knowledge of electrical utility substations and familiarity with substation design. - Engineer In Training certificate (EIT) or passed the Fundamentals of Engineering (FE) exam. **Disclaimer:** - Relocation assistance is not available for this position. **WSP Benefits:** WSP provides a comprehensive suite of benefits focused on providing health and financial stability throughout the employee's career. These benefits include coverage related to medical, dental, vision, disability, and life; retirement savings; paid sick leave; paid vacation (or other personal time); paid parental leave; and paid time off for purposes of bereavement, voting, and/or attendance at naturalization proceedings. **Compensation:** Expected Salary (all locations): $78,000 - $83,000 WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. WSP USA reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, and/or federal law. **POWER is an Equal Opportunity Employer, including women, minorities, veterans and individuals with disabilities.**

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. We know how important your health, wellbeing, and financial strength is to you. To support you, we provide affordable benefits for you and your family members. "Supporting all aspects of the individual - self, health, wealth and community” Our benefits include: Medical, Dental, Vision - starting on day one! Virtual Medical Services 401(k) Retirement Plan (earn 100% matching on your first 6% and fully vested day one) Paid parental leave Company paid life insurance Vacation time to enjoy getting away Tuition Reimbursement Employee Assistance Program (EAP) Plus, more! Growth opportunities available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! Summary of Position: Join our team as an Electrical Project Engineer and play a pivotal role in driving innovation and excellence across our North American plants! In this dynamic position, you'll lead the design and project management of cutting-edge electrical and control systems, focusing on process improvements and optimizing machine performance. You'll have the opportunity to explore and implement advanced technologies that enhance safety, quality, and profitability. Your expertise will shine as you design and program PLCs, HMIs, Drives, and Servo systems, while managing contractor relationships and overseeing large-scale capital projects. Collaboration is key, as you'll work closely with teams across the company, contributing to the standardization of controls, networks, and power equipment. With approximately 30% travel (and more during exciting plant rebuilds), you'll experience hands-on involvement in transformative projects that make a real impact. If you're passionate about innovation, problem-solving, and making a difference, this role offers the perfect blend of technical challenges and rewarding opportunities. Join us and help shape the future of our facilities! Must be willing to relocate to one of our U.S. locations to be considered for the role (Relocation is provided): - Albion, MI - Lanett, AL - Inwood, WV - McGregor, TX - Shasta Lake, CA - Shelbyville, IN Responsibilities Lead and Oversee Large-Scale Capital Projects: Take ownership of major capital initiatives, ensuring successful execution from concept to completion. Design and Program Advanced Systems: Perform programming for Programmable Logic Controllers (PLC), Human-Machine Interfaces (HMI), Drives, and Servo systems to optimize performance and efficiency. Drive New Plant Projects and Equipment Upgrades: Manage the design, specification, and execution of new plant projects, as well as the upgrade and redesign of existing equipment, ensuring seamless integration and improved functionality. Develop and Execute Comprehensive Project Plans: Create detailed scopes of work, request and evaluate quotes, issue purchase orders, and coordinate internal and external project teams while maintaining strict adherence to budgets and timelines. Manage Contractor Relationships: Oversee external contractors performing new installations and electrical upgrades, ensuring quality and compliance with project requirements. Pursue Cutting-Edge Technologies: Identify and implement innovative solutions to enhance safety, product quality, plant profitability, and operational efficiency by reducing scrap, lowering maintenance costs, and more. Coordinate and Implement OEM Equipment: Collaborate with Original Equipment Manufacturers (OEMs) to integrate new equipment into plant operations effectively. Enhance Electrical Safety Practices: Partner with Corporate HSE to develop and implement best-in-class electrical safety practices across all Knauf Insulation North America facilities. Support Plant Rebuilds: Provide critical expertise and leadership during plant rebuilds, ensuring projects are completed efficiently and effectively. Train and Develop Team Members: Offer training and development support to plant Craftsmen, Operators, and Engineers, fostering a culture of continuous improvement and skill enhancement. Drives the highest levels of employee retention and engagement to ensure a sustainable workforce. Fosters a culture of innovation, collaboration, and accountability within the organization. Instill an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education: Bachelor's Degree in Electrical Engineering or Electrical Engineering Technology Knowledge, Skills and Abilities: Strong leadership skills with a natural ability to take initiative and guide teams toward success. A willingness to learn and grow, with a proactive attitude toward acquiring new skills and knowledge. Highly adaptable and able to thrive in a fast-paced, ever-changing environment. Excellent communication and interpersonal skills, with the ability to persuade and influence others effectively. A collaborative mindset, capable of building strong relationships with team members, contractors, and stakeholders. Problem-solving skills with a creative and innovative approach to overcoming challenges. A passion for technology and a drive to implement solutions that improve safety, quality, and profitability. It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law. Not ready to apply? Connect with us for general consideration.

Join ENERCON as an Electrical Engineer! Our Federal Services Group is seeking a Principal Electrical Engineer to join the team. Our team supports our federal clients to solve a wide range of critical engineering problems. Our work covers both nuclear and non-nuclear facilities as well as facility-related infrastructure. Services range from full-scale design of new or replacement facilities to life cycle management to maximize their useful life and availability to assisting with the decommissioning of facilities that have reached the end of their useful life. If you have 3 years of experience and a Bachelor's Degree in Electrical Engineering, we encourage you to read more about this exciting opportunity. Responsibilities As an Electrical Engineer, you'll drive innovation, lead cross-disciplinary collaboration, and guide projects from design to successful field execution. With a focus on excellence and teamwork, you'll solve complex challenges and inspire your team to achieve outstanding results. Collaboration & Coordination: Interface with various engineering disciplines and understand project roles Design & Estimating: Prepare design studies, scopes, and engineering estimates Procurement & Specifications: Develop equipment procurement specs, evaluate bids, and select equipment Technical Expertise: Perform electrical calculations and solve complex technical problems Field Engagement: Travel for walkdowns, field installations, and start-up Leadership & Motivation: Lead teams with a positive attitude to achieve project goals aligned with ENERCON's excellence standards #LI-SH7 Qualifications Bachelor's Degree in Electrical Engineering from an accredited university Professional Engineering License Minimum 10 years of experience with design of electrical systems including, but not limited to: Preparing engineering calculations/analyses, design drawings and engineering reports Applying electrical engineering expertise to the design and qualification of structures, systems, and components Producing procurement specifications and construction specifications (electrical sections) Attending project meetings and perform field walkdowns Mentoring junior engineers Experience working on DOE federal projects Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Proficient in Word and Excel Must be a U.S. Citizen Pay Range USD $145,000.00 - USD $180,000.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. ABOUT THE ROLE You will be a member of our multi-disciplinary team and will perform as a high level specialist in a lead role for the electrical engineering team. Projects may include new construction and renovation in educational, healthcare, sports, corporate commercial and science and technology. HERE'S WHAT YOU'LL DO Perform electrical engineering systems design for building construction. Initiate project designs and help to develop design goals and systems. Oversee, guide, mentor and provide technical leadership to designers and engineering team. Participate or lead project teamwork planning sessions. May serve as project manager or project engineering leader and lead engineering meetings. Assume project engineering responsibilities and adhere to financial and work goals. Design lighting, power distribution, signaling, communications and/or telecommunication systems for healthcare, education/higher education and commercial clients per applicable codes. Prepare construction documents including drawings and specifications. Guide less experienced team members in execution of drawings. Specify electrical equipment. Serves in QAQC process and as an independent reviewer. Complete quality control checks of engineering documents. Work with the Project Manager to establish and maintain realistic work and labor plans and deliverable schedules that contribute to the project's bottom line financial success and satisfy the project's contractual obligations. Participate or lead value engineering sessions with Architectural/Engineering team. Interface effectively with clients and members of the design team. Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts. Review and markup of shop drawings and submittals. Respond to RFI's and review of change orders in the preparation of construction documents. Responsible for projects' construction administration. Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site. Applies knowledge of electrical and building codes in building systems design. May perform other related tasks as needed. HERE'S WHAT YOU'LL NEED Minimum of 10 years of related experience required. Current PE in Electrical Engineering in the United States required. LEED accreditation preferred. Advanced knowledge of electrical engineering. Ability to serve in QAQC process and as an independent reviewer. Excellent verbal and written communication skills. Strong ability to interface effectively with clients and members of the design team. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required. The salary range for this position to be filled in the Buffalo, NY office is $121,170 to $151,410 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

Lead Electrical Engineer Remote - work virtually from anywhere in the United States Salary DLB recognizes salary ranges from job boards do not necessarily reflect our pay ranges. In many instances we out-compete those ranges for well-qualified candidates. Job Summary Positions are available in our Mission Critical Department which focus primarily on hyperscale data centers and related mission critical facilities. The Lead Electrical Engineer will have the opportunity to collaborate with all design staff and oversee full cycle electrical design activities. This person will work as part of the Engineering Team and interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process. The Lead Electrical Engineer will be self-directed on day-to-day work and receive high level instruction on new projects or assignments. Will execute and lead design teams and design projects of complex scope. May coordinate activities of other personnel. The Lead Electrical Engineer will communicate and operate in line with organizational goals and values, as well as departmental objectives. Essential Functions Lead Electrical Engineering Design Activities (50%) Independently perform intermediate to advanced engineering work Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment Utilize AutoCAD and Revit software to prepare drawings and visual aids Review and / or prepare book or sheet specifications for electrical systems Develop and / or review sequences of operations Assist in proposal development including project scope, schedule and budget Timely and effective management of project design team including resource forecasting and coordination Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines Support contact for design clients and builds effective, long-term client relationships May direct interns / other engineering and technical staff Lead Pre-Construction Activities (15%) Survey existing building conditions and prepares technical reports of findings Collect data and other information for construction documents Prepare project design and construction documents Lead Construction Activities (25%) May lead or work as part of the engineering team and interact closely with the project management team Review shop drawings and submittals Review and respond to RFIs Review and complete punch lists and project closeout documents Reporting (10%) Prepare project progress reports for internal and external stakeholders Update and maintain shop drawing and RFI log Manage personal hours using company tools Technology, Digital Tools & AI-Enabled Efficiency Identify opportunities and lead the strategic use of technology, digital platforms, and AI-enabled tools to enhance efficiency through workflow automation, reduced manual effort, and improved accuracy in forecasting, documentation, reporting, and quality processes. Support adoption of emerging technologies - including advanced analytics, data visualization tools, and digital construction management platforms - to strengthen readiness, quality assurance, and project controls. Collaborate with internal teams to ensure technology solutions align with DLB standards for data security, privacy, and operational integrity. Promote a culture that embraces innovation, continuous improvement, and the strategic use of technology to optimize performance and scalability. Performs Other Related Duties as Assigned Requirements Position Requirements (Advanced level for all the following) Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes Knowledge of technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations Knowledge of various electrical topologies and distribution systems Skilled at producing drawings and visual aids using AutoCAD and Revit Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements Skilled in completing assignments accurately and with attention to detail Ability to leverage AI and emerging technologies to streamline workflows, optimize operational processes, and contribute to company-wide innovation. Ability to analyze and prepare documents, reports and correspondence Ability to communicate effectively directly with clients and at times serve as primary point of client contact Ability to work under pressure and meet close deadlines Ability to effectively plan and delegate the work of others Physical Demands The following physical demands must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is Frequently required to remain in a stationary position Frequently moving through office, facility and other environments On occasion the employee may move equipment weighing up to 25 pounds Travel / Relocation Requirements Up to 10%, this may include travel to any or all 50 US states Travel is defined as physically leaving home on behalf of business activities including but not limited to client sites, meetings with other employees, meeting for business development purposes, running errands on behalf of the business, attending industry conferences, etc. Education / Experience Bachelor's degree in electrical engineering from ABET accredited institution PE in related discipline PLUS Minimum of eight years of electrical engineering experience DLB Associates is an EEO / Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status. We are committed to diversifying our workforce. Benefits DLB Associates offers a very competitive benefits package; highlights include Choice of comprehensive medical plans (including two PPO-style plans and a HDHP w/ HSA option) Health reimbursement account (HRA), flex spending accounts (FSA) Dental and vision plans Comprehensive medical, dental and vision benefits extended to spouse / domestic partner and dependent children up to age 26 401k with company match and self-directed brokerage account option PTO including additional paid time off during the last week of the year Company paid life insurance coverage for employees and their eligible dependents Short and long-term disability, AD&D coverage Professional development opportunities, tuition reimbursement and professional licensing assistance Paid parental leave after one year of employment DLB Associates is an EEO/Affirmative Action Employer and participates in the E-Verify program with the Department of Homeland Security. We encourage diversity in our workforce. Are you ready to challenge yourself and redefine standards in the AEC industry? Apply now and join our award-winning team! NOTICE TO THIRD PARTY AGENCIES: DLB does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to DLB in the absence of a signed Service Agreement where DLB has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of DLB and DLB will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. ABOUT THE ROLE You will be a member of our multi-disciplinary team and will work under the direction of a senior engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. HERE'S WHAT YOU'LL DO Perform electrical engineering systems design for building construction. Initiate project designs and help to develop design goals and systems. Participate or lead project teamwork planning sessions. May serve as project manager or project engineering leader and lead engineering meetings. Assume project engineering responsibilities and adhere to financial and work goals. Design lighting, power distribution, signaling, communications and/or telecommunication systems for healthcare, education/higher education and commercial clients per applicable codes. Prepare construction documents including drawings and specifications. Guide less experienced team members in execution of drawings. Specify electrical equipment. Complete quality control checks of engineering documents. Participate or lead value engineering sessions with Architectural/Engineering team. Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts. Review and markup of shop drawings and submittals. Respond to RFI's and review of change orders in the preparation of construction documents. Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site. May perform other related tasks as needed. HERE'S WHAT YOU'LL NEED Minimum of 8 years of related experience required. Current PE in Electrical Engineering in the United States required. LEED accreditation preferred. Strong knowledge of Life Safety Codes Ability to work independently in all electrical disciplines with no oversight or guidance. Excellent verbal and written communication skills. Must be a critical thinker. Must be highly analytical. Must have the ability to engage effectively with clients. Must be a fully qualified professional able to perform work with a high degree of latitude, with some ambiguity in work. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required. The salary range for this position is $101,010 to $126,315 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. Please provide your resume and portfolio when applying. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

SummaryCome bring your energy to change the world. Grid Solutions, part of the GE Vernova portfolio of energy businesses, serves customers globally with over 12,000 employees. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition. GE Vernova, a dynamic accelerator comprised of our Power, Renewable Energy, Digital and Energy Financial Services businesses, is focused on leading a new era of energy - electrifying the world while simultaneously working to decarbonize it. If you are ready to make a difference and usher in a new era of energy, come join us.Job Description Why we come to work: At GE Grid Solutions, we are always up for the challenge - and we're always driven to find the best solution. Our projects are unique and interesting, and you'll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you'll be exposed to game-changing, diverse projects that truly allow you to play your part in the green energy transition. Essential Responsibilities: Independently perform in depth system studies listed below; and/or specify scope, review, comment, and direct/oversee 3rd party provider(s) for the studies below: Load Flow, Reactive Power Capability and Compensation, Power Factor Study Short Circuit Study Combined Short Circuit Ratio (CSCR) Study Transient Switching and Insulation Coordination Study (including Transient Overvoltage and Recovery Voltage Analysis) Main Circuit Parameters Harmonic Performance/Stability Study Transient Ride Through and Dynamic Performance Studies (DPS) and other Design Studies using the Offline Simulation Tools Overall System Performance Assessment Study Integration of dedicated studies for systems utilizing combined AC power sources; AC power sources include conventional generations, AC-BESS, turbines, and renewables. Expertise in frequency and time-domain simulation tools, like PSCAD, PSS/E, ETAP, DigSilent PowerFactory, to perform system studies as detailed above or under desired characteristics section. Produce detail technical specifications and factory acceptance test criteria for major HV equipment, e.g., transformers, GSU, breakers, disconnect switches, etc. Excellent technical communication skills to provide guidance, analysis and reports in clear succinct manner to customers, project team and stakeholders. Provide guidance and coordinate the engineering tasks to meet the project/tender requirement. Technical responsibility in areas of expertise. Be innovative, develop and industrialize solutions tools and processes associated with system studies. Value engineering (process improvement): review and record design processes and develop new or improved processes. Enforce engineering discipline and set processes across all work tasks and adherence to company policies, quality procedures and work instructions (e.g., through trainings, technical reviews). Represent the business in external events by publishing technical papers. Apply yourself towards improving your technical knowledge base and keep abreast of relevant methodologies and technological advancement within the company. Support and mentor other engineers to increase the team's technical knowledge and competence. Report or resolve any non-conformances in a timely manner. Actively participate in defining corrective actions when work is unsafe or when an uncontrolled risk is observed. Required Qualifications: Bachelor's degree in electrical engineering including power systems and power electronics subjects with proven professional experience and technical expertise in the field of power system engineering and preferably in AC substations and power plant System Studies. Minimum 8 years' experience of network or transient studies for conventional electric-energy generation / FACTS / renewable energy / inverter-based power systems in offshore wind, industrial, utility substations and grid interconnects. Able and willing to travel 20% including international and comply with GE travel guidelines. Desired Characteristics: Knowledge of the North American Electric Reliability Corporation (NERC) and Federal Energy Regulatory Commission (FERC) compliance requirements and/or ISOs' interconnection or transmission planning guidelines. Familiarity with NERC standards such as TPL, MOD, and PRC. Familiarity with ISOs such us PJM, ERCOT, MISO, SPP, CAISO, ISO-NE, NYISO. Master's degree in electrical engineering including power systems and power electronics subjects with proven professional experience and technical expertise in the field of power system engineering. Knowledge of RAM (Reliability-Availability-Maintainability) studies. Independently perform in depth system studies listed below and/or specify scope, review, comment, direct/oversee 3rd party provider(s) for the studies below: Grid Compliance, Transmission Network Planning Electromagnetic Compatibility (EMC) Study, Radio Frequency Interference (RFI) Study Low Voltage Ride Through (LVRT) and High Voltage Ride Through (HVRT) Study Arc Flash Study Protection Coordination Study Cable Selection and Sizing Network Study: Confirmation of the Correct Interaction between the Equipment, its Control System, and the rest of the Network Control Parameter Study focused on Dynamics and Transient Performance Grid forming study with an AC/DC power pack Expertise in the use of computer mathematical and simulation tools as applied to the design of the activities. Strong knowledge on medium high voltage substation North American standards & guidelines (IEEE & ANSI standards and codes such as the NEC and the NESC.), local grid codes and related equipment (safety, application, sizing, and integration). Moreover, ability to engineer design packages when no clear customer specification is provided. Knowledge of IEC and CIGRE guidelines is a plus. Professional engineering license and willing to review and seal your work and the work of others under your supervision. Strong knowledge on contract and project management, engineering, procurement and construction (EPC), or engineering equipment package (EEP) project execution. Working knowledge of applicable design calculations for primary & secondary equipment such as battery sizing & DC system component selection, power transformer and circuit breaker selection, circuit protection, control and power cable selection and rating, bus, fittings, insulator, and arrector selection, ground grid design, and lightning protection. Excellent personal computer skills, including programming and design automation. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No #LI-Remote - This is a remote position Application Deadline: January 16, 2026For candidates applying to a U.S. based position, the pay range for this position is between $98,400.00 and $164,000.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set.Bonus eligibility: discretionary annual bonus.This posting is expected to remain open for at least seven days after it was posted on December 09, 2025.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

BHC Consultants is a consulting engineering, planning, and building code and construction compliance firm with offices in Seattle, Tacoma, and Bellingham, Washington. We are seeking an energetic, dedicated, and resourceful full time Electrical Engineer candidate who is eager to fast track their career under the tutelage of respected senior professional engineers and project managers. Collaboration with staff in all offices should be expected; preferred location can be prioritized. BHC is a growing firm with a significant backlog of municipal consulting services contracts for cities, counties, and special purpose districts in the Northwest, supported primarily by Western Washington clients. We are proud to be an employee-owned and managed consulting firm committed to the development and retention of our employees within a positive, collaborative, and challenging work environment. We are committed to a healthy work-life balance for all staff. The Electrical Engineer will be responsible for the design of the electrical components of a wide variety of projects including commercial, industrial, municipal, water and wastewater treatment, and pump station projects. The designs tasks include cabling system selection, sizing, and routing; electrical gear specification and layout; lighting fixtures selection and layout; engine generator sizing; electrical system condition assessment; construction observation; communications and notification systems specification and layout; and instrumentation and control system selection, specification, and layout. The successful candidate will take responsibility for design of electrical systems from project definition through construction. The candidate must be able to interface with project managers, engineers, vendors, code inspectors, utility personnel, and client staff. The candidate must be able work within established budgets and schedules. The candidate should have the ability to manage work associated with multiple projects concurrently. Key Qualifications: Under the guidance of registered professional engineers, provide electrical design and engineering for various electrical systems, including power distribution, lighting, instrumentation and controls, grounding, telecommunications and fire alarm systems. Apply current codes and standards to designs. Perform electrical load and voltage drop calculations. Prepare short circuit and overcurrent device coordination studies. Perform cost estimates of electrical designs. Prepare electrical specifications. Provide energy efficient and sustainable design. Provide construction assistance, including review of contractor submittals, answering contractor questions, and observing construction. Required Qualifications: Bachelor of Science (Electrical Engineering or other Engineering discipline) Engineer‐in‐Training (EIT) certification or Professional Engineering (PE) licensure required. Those with an EIT must be on track to become a PE within 2 years. Minimum experience: 4 Years Why Join Our Team? Generous total compensation package Monthly remote work allowance 100% company paid employee medical, dental, vision, life, and disability insurance 60% company paid dependent health and vision insurance 50% company paid dependent dental insurance Health Savings Account and Flexible Spending Account options to achieve tax savings Flexible schedules Reimbursement for professional registrations/renewals and approved training/conferences Paid memberships in professional organizations Employee referral bonus program Career guide mentorship program Paid time off (sick, vacation, holidays, and volunteer day) 401(k) retirement plan with company matching contribution We offer broad based company ownership to employees at all levels, with no majority owners, and where everyone can share in the benefits of ownership. This model is unique to BHC and gives us local control, ease of leadership transition, flexibility, and the freedom to control our destiny. BHC Consultants, LLC is an equal opportunity employer committed to the principles of non-discrimination in the workplace. BHC Consultants, LLC does not discriminate in employment on the basis of age, race, creed, color, religion, sex, sexual orientation, national origin, disability, marital status or any other basis that is prohibited by federal, state, or local law.

Support all types of power systems Typically, will work with a Sr. Power Systems Engineer to support project scope. Perform short circuit analysis, protective device coordination, and arc flash studies. Assist other engineers with all types of power systems and engineering studies. Assist in the gathering of field data and documentation as needed. Support the full range of complex engineering studies including reliability, harmonics, load flow, and reliability-centered maintenance studies. Assist with the electrical power system documentation including system configuration, equipment ratings, and settings. May support circuit and system measurements and help write reports relating to EMF, electrical load, voltage, and power quality projects. Assist in the preparation of estimates and take-offs for engineering study project proposals. Gain a working knowledge of computer software and data utilized in the conduct of power systems and engineering studies and arrange training for others as needed. Follow and assist in the development of policy and procedures for conducting power system and engineering studies. Additional Information The company will only employ those who are legally authorized to work in the United States for this position. This is not a position for which sponsorship will be provided. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Education and/or Experience Graduate Engineer BSEE. Must have taken and passed the FE exam or pass the FE exam within 12 months of hire date. Requires excellent verbal and writing skills to communicate effectively with clients, field engineers, peers, and management. Requires mature judgment, responsible for assigned projects. Requires a high degree of organizational skills. Requires sound grounding in electrical engineering. Willing to work flexible hours, weekends, holidays, and night work. Regularly required to stand, walk, use hands and fingers, talk, and hear. Frequently required to sit, and work at the computer. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation, and the ability to adjust focus. Valid Driver's License. PHYSICAL REQUIREMENTS • Light Lifting (5 Ibs.-25 Ibs.) Job Description • Medium Lifting (30 Ibs. - 45 Ibs.) • Heavy Lifting (over 50 Ibs.) • Frequent Standing • Frequent kneeling / crawling / stooping • Frequent bending / twisting • Frequent climbing (stairs, ladders) • Frequent driving (car, van, truck) ENVIRONMENTAL DEMANDS • Extreme cold (below 32*) • Extreme heat (above 100*) • Noise Level (Medium / High need to shout to be heard) • Working around moving machinery (fork-lifts, tractors) • Protective Equipment Required (earplugs, gloves, eyewear, respirator, mask, etc.) • Work outdoors (no effective protection from weather) TRAVEL TIME REQUIRED • 25% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Action Oriented - Enjoys hard work; is action oriented and full of energy for the things that he/she sees as challenging; not fearful of acting with a minimum of planning; seizes opportunities when they arise. Building Effective Teams - Creates strong morale and spirit in his/her team; shares wins and successes; fosters open dialogue; lets people finish and be responsible for their work; lets subordinates present to senior management; acts as if real success is the success of the team. Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customers; gets first-hand customer information and uses it for improvements in products and services; talks and acts with customers in mind. Drive for Results - Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Directing Others- Is good at establishing clear directions; sets stretching objectives; distributes the workload appropriately; lays out work in a well-planned and organized manner; maintains two-way dialogue with subordinates on work and results. Organizing - Can marshal resources (people, funding, material, support) to get things done; can orchestrate multiple activities at once to accomplish a goal; uses resources effectively and efficiently; arranges information and files in a useful manner. At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5.0 billion in revenue, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** The anticipated salary range for this role in the Oregon and Colorado locality is between $_108,150__ to $ 135,188____ per year [IF ROLE IS NON-EXEMPT: (based on a 40-hour work week)]-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

OPPORTUNITY For a talented engineer with experience designing electrical systems for large industrial and commercial facilities. Join an integrated team of architects, engineers and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will execute a broad set of engineering competencies, technical design knowledge, consultation and problem-solving skills as well as provide mentorship to others in an environment that values collaboration. POSITION Reports to the SVP/Director of Engineering. Leads engineering and design teams to prepare drawings and specifications for lighting and lighting control systems, low and medium voltage power distribution systems, specification of basic material and methods, and development of control systems for mechanical and refrigeration systems. This position will proactively work across multi-discipline design teams. QUALIFICATIONS BSEE, BSEET, BSAE or related degree; PE required 10+ years of experience designing electrical systems for large industrial and commercial facilities, preferably within the A/E consulting industry Independently creates construction documents Excellent interpersonal skills, work ethic and demonstrated leadership capabilities COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit ******************* COMPENSATION Commensurate with experience, plus excellent benefits package: comprehensive health plan with $0 monthly premium, life insurance, paid time off, paid parental leave, 401K match, profit sharing, end-of-year bonus plan, remote work flexibility, tuition reimbursement, on-site fitness center, free parking and more.

ITAC serves Process & Industrial clients with integrated engineering and construction services for complex capital projects. We also offer specialty services including power systems services and products, custom machine fabrication, and fall protection services and equipment. Founded in 1988 on a dream and a $5K loan, ITAC is a true success story. From humble beginnings to an ENR-Ranked Top Design Firm with a nationwide footprint and over 450 employees operating from 6 offices in Virginia, North Carolina and South Carolina, we provide Fortune 500 companies with innovative design-build solutions. We specialize in power generation & utilities, chemicals, food & beverage, forest products, advanced manufacturing, and minerals & metals. ITAC's purpose is to make life better. For our employees, this means providing them with the resources and flexibility they need to have both a rewarding career and a fulfilling family life. ITAC is 100% employee-owned. Through our Employee Stock Ownership Plan (ESOP) and Direct Stock Ownership, every team member has the unique opportunity to be an owner who shares in the company's growth and earnings. We offer our team a comprehensive benefits package and numerous employee incentives. Rooted in love, we serve and care for our employees like family. We hire passionate and motivated people with an innovative mindset and the desire to grow. If the thought of challenging, fast-paced projects excites you, then you've come to the right place. At ITAC, you'll be part of a collaborative team that works hard to make life better. For more information, visit itac.us.com . General Description of the Job (tasks, duties, roles, expectations): Independently performs Electrical Engineering activities for all phases of Electrical development and equipment design for a project of moderate size and complexity. Must be fully competent in performing all conventional aspects of Electrical Engineering and application of independent judgment for the evaluation, selection, and substantial adaptation and modification of standard design engineering criteria, methods, and procedures. Assignments have objectives requiring the investigation of several variables. Periodic review of work done by less experienced engineers is required. Perform the layout, analysis, and design of the electrical engineering scope of work for industrial projects. Design and develop electrical documentation: Electrical Equipment Specifications Electrical Plan Drawings (Power, Lighting, Grounding, etc.) Electrical Schematics (Single line diagrams, Motor Schematics, Interconnection diagrams, etc.) Design Calculations Work with and understand core design basis documentation (i.e., P&IDs, General Arrangements, Equipment List, etc.) Lead a small staff of designers and possibly junior engineers. Perform quality checking procedures on Electrical Engineering work performed by others. Resolve technical design conflicts. Cognizant of the capabilities and limitations of various computer software packages and automated engineering and design equipment to effectively direct their use for diverse engineering assignments. This includes proficiency in utilizing various computer software packages. AutoCAD MS Excel MS Word SKM/ETAP Power System Analysis Requirements Bachelor's degree in an Electrical Engineering - accredited engineering program EIT certification is preferred, PE certification is a plus 5+ years of industrial and/or manufacturing experience Plant engineering experience a plus Background in industrial work Knowledge of the National Electrical Code Knowledge of 600V power distribution systems Knowledge of plant infrastructure and equipment installation design Working knowledge of industrial control systems Working knowledge of AutoCAD a plus Good communication skills Please note: Onsite doesn't necessarily mean on a job site, simply that this position is not currently remote. Benefits From internships to seasoned professionals, our growing company provides career opportunities for all levels of experience. We offer our team a comprehensive benefits package and numerous employee incentives. For life's challenges, we also provide our employees and their immediate families with certified chaplains for around-the-clock encouragement and support. Rooted in love, we serve and care for our employees like family. ITAC provides benefits such as Health, Vision, and Dental Insurance 401k & ESOP Life Insurance Short & Long-Term Disability Sick Time Off Paid Time Off Paid Holidays Employee Assistance Program Tuition Reimbursement Professional Development Wellness Program Mentorship Program Safety Incentive Program 24/7 Chaplain Care Flexible Schedule & Remote Working

Role: Protection & Controls Substation Engineer III (Mid-Level) Employment Type: Direct Hire Compensation: Up to $115K + Bonus Potential Why Work for Our Client? * Great Benefits: Comprehensive benefits from day one * Work/Life Balance: Fully remote position - work from home Monday-Friday * Bonus Potential: Additional earning opportunities * Career Growth: Excellent launchpad toward PE licensure on transmission side of power industry * Valued Contributions: Career growth and contributions valued from day one Summary of Key Responsibilities * Create/modify design documents and drawings including substation one-lines, three-lines, control schematics, wiring diagrams, relay panel arrangements, and specifications * Design auxiliary AC and DC power systems * Develop SCADA system and communications interfaces * Perform engineering calculations (relay burden, voltage drop, short circuit, battery sizing, AC/DC load tabulations) Education & Experience: * Required: Bachelor's degree in Electrical Engineering from ABET-accredited university * Required: Minimum 3 years experience in relay protection and control design of high voltage (12-500 kV) substations * Required: Engineer in Training (EIT) designation * BlueBeam is Required If you are qualified and interested Please send your resume to Kristie at kharnish@blackrockres.com #LI-KH1

This role will be functioning as a product design engineer who will focus on electrical systems based at our R&D facility in PA. Why Work for CaptiveAire? Nation's leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. Knowing that the company truly has an owner and leadership team that cares for the employees. At CaptiveAire each employee is more than a number, they are a valued member of a growing and diverse team. The open-door policy at CaptiveAire means that no matter who you are in the company that leadership is open to hear your comments and concerns. This means that your ideas are heard. Not once in my time here at CaptiveAire have I felt like I was anything less than an asset to this company and a valued member of the team. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: An Electrical Engineer role with our R&D team encompasses a wide variety of tasks where one day does not look exactly like the next. Typical tasks can include: Product design focused on improvements for product line through the various CAD software and hands on work in our lab. Receiving and analyzing feedback from plants and service for product issues or recommended improvements. Component acquisition work with supply chain team. Working with the R&D team to solve issues seen by our sales team, the Application Engineering team and our service team on product issues. Solving software and background issues alongside internal IT team. From an R&D Engineer: I love that my job is not focused solely on a singular component or a singular system and instead blends both practical and theoretical knowledge. I am constantly involved in different aspects that involve our products which allows me to keep a wholistic view of the work I am doing and its impact. Traveling to get boots on the ground at our plants to hear their feedback or going to performance testing has also been very interesting. Primary Job Responsibilities: Design, test and implement all electrical systems and products Full understanding of electrical schematics and electrical system design Troubleshoot electrical circuits and hardware utilizing tools such as multimeters and oscilloscopes Handle equipment installation, removal, upgrades, modifications, and electrical assembly Job Requirements: Bachelor's degree in electrical engineering 0-5 years of engineering design and electrical knowledge Understanding of electrical circuits and PCB design Self-motivation to keep up with current electrical advances using new technologies Full working knowledge of AutoCad and electrical schematics Familiar with safety testing and agency approval. Understanding of electrical tools and equipment: crimpers, multimeters, connectors, relays, contractors, wire gauges/types, soldering, etc. Must be willing to travel to manufacturing facilities and job sites as required. Basic HVAC understanding PREFERRED THIS IS NOT A REMOTE ROLE. Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$95k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #P1 #LI-TL1

WHO WE ARE Michael Baker International is a leading provider of architectural, engineering and consulting services, including design, planning, environmental, construction and program management. The company provides its comprehensive range of services and solutions to support U.S. federal, state, and municipal governments, foreign allied governments, and a wide range of commercial clients. Michael Baker's more than 4,000 employees across 85 locations are committed to a culture of innovation, collaboration, and technological advancement to help solve challenges for clients and communities throughout the country. DESCRIPTION Michael Baker International is seeking a Full-Time (40 hours/week) Summer 2026 Electrical Engineering Intern student to support our electrical and lighting design services on a wide variety of transportation related projects. The selected hire will have the option to work remotely. In this internship, you will become part of Michael Baker International's Transportation Department which includes highway, aviation, electrical, and traffic engineers. Our Pittsburgh staff also supports other offices throughout the country with specialized transportation engineering design services. The successful candidate will be an enthusiastic, motivated, self-starter, with responsibilities that include production, design, and documentation for a broad range of project types. With a current focus on growing Design/Build, Federal, and Interstate project opportunities, along with market-driven diversification including Rail/Transit, Highway Interchange, and Bridges/Tunnels. You will work in multi-disciplinary, collaborative project design teams with Civil Engineers, Architects, and Systems Engineers. The intern must demonstrate creative problem-solving, initiative to learn new concepts, organizational skills, an ability to work in a team environment with licensed electrical and civil engineers, and a basic understanding of construction documents and constructability. You will also assist Electrical Engineers with the development of electrical system designs including but not limited to interior and exterior lighting; circuiting; schedules; calculations; sizing of electrical equipment, conduit, wiring, generators, and transformers, etc. RESPONSIBILITIES Assist with the preparation of designs, design calculations, producing BIM models and construction drawings for electrical transportation-related projects for a variety of clients Work closely with engineers and designers to complete design and/or analysis of the lighting needs on roadways, railways, trails, sidewalks and other transportation infrastructure projects Research/investigate solutions and report findings Assist in preparation of quantity calculations and construction cost estimates Use design software to electronically apply engineering fundamentals in construction plan set preparation Learn and understand the activities involved in assembling Electrical transportation project contract document You may also assist other departments within the office on an as-needed basis. PROFESSIONAL REQUIREMENTS Currently enrolled in and pursuing an Associates Degree in Drafting or a Bachelor's Degree in Electrical Engineering at an accredited University or College; minimum of 2 years of coursework completed is desired. College level engineering course in Electrical Engineering is a plus Proficiency with Microsoft Office Suite Strong written and verbal communication skills Experience with CAD software is a plus COMPENSATION The approximate compensation range for this position is $18 - $22 per hour. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location.