Telecom technician jobs in Warwick, RI

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Field Service Engineers Nationwide Opportunities Are you a hands-on problem solver who loves working with complex systems in the field? Whether your background is in pharma, medical device, med tech, or advanced manufacturing, we'd love to connect. At Scientific Search, we partner with some of the most innovative companies in the life sciences and manufacturing sectors - many of which are continually adding to their service and support teams across the U.S. We're always on the lookout for talented Field Service Engineers with experience in: Installing, maintaining, and troubleshooting laboratory or production equipment Supporting electromechanical, instrumentation, or automation systems Ensuring compliance with quality and safety standards Providing exceptional customer service and technical support onsite or remotely If you'd like to be considered for upcoming Field Service Engineer roles as they arise, please send us your resume. We'll keep you in mind for opportunities that align with your expertise, location preferences, and career goals. Let's stay connected - new opportunities arise every week, and we'd love to help you find the right fit when the time is right. #19576

Facilities Technician to $59K - Hands-On Role! Our client, a respected technology company, is seeking a Facilities Technician to ensure a safe, functional, and well-maintained office environment for staff and visitors. This hands-on role involves performing routine maintenance, managing office supplies, supporting events, and handling mail and equipment distribution. The ideal candidate brings 3+ years of facilities or building maintenance experience and thrives in a fast-paced, team-oriented setting. Position Details: Location: Boston, MA Work Model: In-Office Hours: 3:30PM-12AM, 5 days a week Responsibilities include conducting daily inspections and minor repairs to maintain space readiness; responding promptly to work orders; organizing office layouts and storage areas; managing inventory and stocking supplies; handling mail and package distribution; assisting with office moves and furniture installations; supporting events and employee onboarding; and performing additional tasks as assigned. The ideal candidate possesses 3+ years of experience in facilities or maintenance; ability to lift and move 50-70 lbs regularly; strong organizational and problem-solving skills; proficiency in Microsoft Office applications; excellent communication and attention to detail; and a collaborative approach to working in a fast-paced environment. Join this team offering a strong benefits package, generous PTO, and free onsite parking with the opportunity to contribute to a mission-driven organization! Beacon Hill is an equal opportunity employer and individuals with disabilities and/or protected veterans are encouraged to apply. California residents: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. If you would like to complete our voluntary self-identification form, please click here or copy and paste the following link into an open window in your browser: ***************************************** Completion of this form is voluntary and will not affect your opportunity for employment, or the terms or conditions of your employment. This form will be used for reporting purposes only and will be kept separate from all other records. Company Profile: Founded by industry leaders to set a new standard in search, career placement and flexible staffing, we deliver coordinated staffing solutions with unparalleled service, a commitment to project completion and success and a passion for innovation, creativity and continuous improvement. Our niche brands offer a complete suite of staffing services to emerging growth companies and the Fortune 500 across market sectors, career specialties/disciplines and industries. Over time, office locations, specialty practice areas and service offerings will be added to address ever changing constituent needs. Learn more about Beacon Hill and our specialty divisions, Beacon Hill Associates, Beacon Hill Financial, Beacon Hill HR, Beacon Hill Legal, Beacon Hill Life Sciences and Beacon Hill Technologies by visiting ************* Benefits Information: Beacon Hill offers a robust benefit package including, but not limited to, medical, dental, vision, and federal and state leave programs as required by applicable agency regulations to those that meet eligibility. Upon successfully being hired, details will be provided related to our benefit offerings. We look forward to working with you. Beacon Hill. Employing the Future (TM)

Join a global community of talented professionals to shape the future of AI. Earn up to $15 USD/hr and additional rewards based on quality of submission. Outlier is committed to improving the intelligence & safety of AI models. Owned and operated by Scale AI , we've recently been featured in Forbes for partnering experts with top AI labs to provide the high quality data for LLMs. We believe AI can only perform as well as the data it's trained on. That's why we work with contributors from all over the world , who help improve AI models by providing expert human feedback . This data has led to AI advancements for the world's leading AI labs and large language model builders. We've built a best-in-class remote work platform for our freelance contributors to provide valuable, specialized skills, and we in turn strive to provide them with a positive experience based on our core pillars of reliability, transparency, and flexibility. We are looking for native English speakers to contribute their expertise toward training and refining cutting-edge AI systems. Adopt a "user mindset" to produce natural data to meet the realistic needs you have or would use AI for. Use the tool of rubrics to address user needs in a structured way. Evaluate AI outputs by reviewing and ranking reasoning and problem-solving responses from large language models. Contribute across projects depending on your specific skillset and experience. Bachelor's degree or higher (or currently enrolled). Analytical and Problem-Solving Skills : Ability to develop complex, professional-level prompts and evaluate nuanced AI reasoning. Strong Writing : Clear, concise, and engaging writing to explain decisions or critique responses. Commitment to accuracy and ability to assess technical aspects of model outputs. Experience in fields like literature, creative writing, history, philosophy, theology, etc. Prior writing or editorial experience (content strategist, technical writer, editor, etc.). Interest or background in AI, machine learning, or creative tech tools. Earn up to $15 USD/hr, paid out weekly Rates vary based on quality, accuracy, and time spent. Model Playground Interact, experiment and engage with leading large language models free of cost Flexible schedule and Most experts spend 5-10 hours/week, up to 40 hours working from home Join a global community of Coding experts Join a global network of experts contributing to advanced AI tools Disclaimer: For non-core work, such as during initial project onboarding or project overtime phases, lower rates may apply. Certain projects offer incentive payments. Please review the payment terms for each project. We welcome applicants from all backgrounds and celebrate diversity in our workforce.

Are you ready to take flight in a dynamic and fast-paced aviation industry? As a global leader in aviation services, Swissport provides Ground Handling, Cargo Handling, and Passenger Services to over 300 million passengers annually. Our mission is simple - "To provide the aviation industry with consistent and tailor-made solutions around the globe, for a better customer experience." We believe that our people are what differentiates us from our competition. At Swissport, we are driven by our core values of Show You Care, Do the Right Things and Win as a Team, and we are currently seeking dedicated individuals, who align with these values, to join our team at various locations across the globe. Job Summary Fleet Mechanic is responsible for service and maintenance, keeping in good order all Ground Service Equipment at a designated station, keeping Swissport Ramp and other service agencies safe with reliable equipment that meets all local and governing laws. The expected pay rate is $28.00 - 43.00/hr. Full-time employees are offered a range of health and wellness benefits as well as 401(k) with company match paid vacation time, sick time, and company paid holidays. Your activities Operate and drive all types of GSE equipment - motorized and non-motorized. Perform and show competence in preventive maintenance per established schedules on all ground support equipment. Provide trouble-shooting and diagnostic assessment of ground support equipment as required. Hydraulic knowledge or basics necessary. Must be willing to learn hydraulic systems. Airport deicing training will be required. Reporting to work during snow, Ice and cold weather required. Overtime is necessary during weather emergencies. Will be working outside in all weather conditions year-round. Remove malfunctioning ground support equipment from service and ensure GSE is not returned to service until malfunction has been accurately diagnosed and repaired. Respond to emergency service calls as well as accidents involving ground support equipment. Complete all maintenance/repair documentation consistent with carrier, station, airport authority, municipal, state, federal and SP requirements. Comply with all federal, provincial, municipal, airport authority and carrier security requirements. Will retain a motor vehicle driver's license for both air side / non airside in good standing at all times. Follow all safety guidelines set out by WCB, EPA, WHIMIS, and SP management. Keep GSE shop and its equipment always clean and serviceable, report all deficiencies to management. Fuel equipment as necessary with full regard for all safety and environmental requirements. Will liaison with Ramp management, customers and staff in a professional manner when needed. Work as a self-starter and report to shop leads daily. Your profile Valid driver's license. Must have tools. HEAVY DUTY TRUCK AND DIESEL EXPERIENCE IS A PLUS. Trade school training and or a mechanical background preferred. Good oral and verbal communication skills. Good computer skills. Willing to clean and maintain a safe workshop. Willing to travel when necessary for training or to assist other SP stations with GSE needs as required. What we offer 401(k) Dental insurance Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance At Swissport, we believe in diversity, equal opportunity, and the power of our values to drive our success. We are committed to providing a workplace that fosters inclusion and where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Visit our website at to learn more about Life at Swissport. Join Swissport today and be part of a team that connects the world of aviation!

***This school has been designated underperforming or chronically underperforming (formerly Level 4 or 5) by the State of Massachusetts. *** Boston Public Schools seeks an exceptional Vocational Tech [Information Support & Services Networking] Teacher who is highly qualified and knowledgeable to join our community of teachers, learners, and leaders. This is an exciting opportunity for teachers who desire to serve where their efforts matter. In BPS, the teachers and leaders are committed to the vision of high expectations for achievement, equal access to high levels of instruction, the achievement of academic proficiency for all students, and the closing of the achievement gap among subgroups within the schools. BPS is a great place for those who seek to work in an environment that supports their creativity and innovation, and respects their skills and abilities as a teacher. Reports to: Principal/Head of School Responsibilities Teach: Information Support Services & Networking: Provide a vocational technical course of study that is aligned to state curriculum frameworks and meets the learning needs of the students and maintains a safe learning environment Be in alignment with vocational technical skills and content embodied in the school's curriculum map to achieve equitable student outcomes Earn and/or maintain all required licensure Core Competencies: Using the Rubric of Effective Teaching, the Office of Human Resources has identified priority skills and abilities that all BPS teachers should possess: Accountability for Student Achievement (II-A-1. Quality of Effort and Work, II-D-2. High Expectations, I-B-2. Adjustments to Practice) Sets ambitious learning goals for all students, creates cognitively demanding tasks, and models the belief that all students can master challenging material through effective effort Assesses students' understanding regularly with ambitious learning goals in mind and takes ownership of making necessary adjustments to instruction to reach goals despite setbacks Passionate and optimistic about their students, their content, and the teaching profession Communicating Content Knowledge (I-A-1. Subject Matter Knowledge, I-A-4. Well-Structured Lessons) Demonstrates mastery of and enthusiasm for the content area and the pedagogy it requires Demonstrates understanding of how the subject matter applies in real-world settings and connects to other content areas and relevant standards Can convey content in creative and engaging ways that align to standards Equitable & Effective Instruction (II-A-3. Meeting Diverse Needs, II-A-2. Student Engagement, II-B-1. Safe Learning Environment) Scaffolds and differentiates instruction in order for all students to do complex thinking and rigorous academic work Uses instructional practices that are likely to challenge, motivate, and engage all students and facilitate equitable, active student participation Builds a productive learning environment where every student participates and is valued as part of the class community Cultural Proficiency (II-C-1. Respects Differences, II-C-2. Maintains a Respectful Environment) Actively creates and maintains an environment in which students' diverse backgrounds, identities, strengths, and challenges are respected Parent/Family Engagement (III-A-1. Parent/Family Engagement) Engages with families and builds collaborative, respectful relationships with them in service of student learning Professional Reflection & Collaboration (IV-A-1. Reflective Practice, IV-C-1. Professional Collaboration) Regularly reflects on practice, seeks and responds to feedback, and demonstrates self-awareness and commitment to continuous learning and development Seeks to participate in and contribute to a collaborative adult learning community. Qualifications - Required Education: Associate's degree or higher degree related to the subject matter and skills to be taught Employment experience: 4 Years of Experience (full-time employment experience directly related to field) Occupational License/ Industry Certification: Ability to earn a Massachusetts Vocational Tech Teaching License in the appropriate subject (9-14) by achieving a passing score on the subject-specific written and performance exams and achieving a passing score on one of the literacy skills MTELs. Ability to earn Massachusetts Sheltered English Immersion (SEI) Endorsement Ability to meet the Standards of Effective Teaching established by the Boston Public Schools as outlined above. Current authorization to work in the United States - Candidates must have such authorization by their first day of employment. Qualifications - Preferred Experience teaching in urban schools and/or an industry setting Has OSHA-10 certification or is willing to earn it Possesses industry-recognized credentials that are part of the curriculum and the ability to train students to earn those credentials BPS values linguistic diversity and believes that candidates who speak another language bring added value to the classroom, school, and district culture and diversity. BPS is particularly interested in candidates who are fluent in one of BPS' official languages: Spanish, Creole (Cape Verdean), Creole (Haitian), Chinese, Vietnamese, Portuguese, & Somali. In order to best serve all students, BPS prefers all core content teachers to be certified in their subject area and one or both of the following: Moderate Disabilities, English as a Second Language (at the appropriate grade level(s)). Terms: BTU, Group I Please refer to ******************************* (under "Employee Benefits and Policies") for more information on salary and compensation. Salaries are listed by Unions and Grade/Step. The start and end times of BPS schools vary, as do the lengths of the school day. Some BPS schools have a longer school day through the "Schedule A" Expanded Learning Time (ELT) agreement. The Boston Public Schools, in accordance with its nondiscrimination policies, does not discriminate on the basis of race, color, age, criminal record, physical or mental disability, pregnancy or pregnancy-related conditions, homelessness, sex/gender, gender identity, religion, national origin, ancestry, sexual orientation, genetics, natural or protective hairstyle, military status, immigration status, English language proficiency, or any other factor prohibited by law in its programs and activities. BPS does not tolerate any form of retaliation, or bias-based intimidation, threat or harassment that demeans individuals' dignity or interferes with their ability to work or learn. If you require an accommodation pursuant to the ADA for the application process, please contact the Accommodations Unit at accommodations@bostonpublicschools.org

We are seeking a dependable and motivated individual to support a telecommunications project in a hospital setting. This role involves assisting two onsite telecom technicians with cable installation throughout the hospital ceilings. The ideal candidate will be comfortable working in an active healthcare environment and performing physical labor tasks. Responsibilities + Assist telecom technicians with pulling and routing cables through ceilings and other designated areas. + Handle and organize cabling materials (Cat5, Cat6). + Maintain a clean and safe work environment in compliance with hospital standards. + Perform general labor tasks as directed by the lead technicians. Required Skills + Basic knowledge of cabling (Cat5, Cat6). + Ability to follow instructions and work as part of a team. + Comfortable with physical labor and working in ceiling spaces. Additional Qualifications + Reliable and punctual. + Ability to work in a hospital setting with attention to safety protocols. Job Type & Location This is a Contract position based out of Cambridge, MA. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cambridge,MA. Application Deadline This position is anticipated to close on Dec 12, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

IT Technician (3-Month Contract) - Restaurant Firewall Deployment Project Employment Type: Temporary (3 months) Project Duration: January 2026 - March 2026 Schedule: Flexible Compensation: $40/hour About the Role We are seeking a Temporary IT Technician to assist with a large-scale firewall deployment across our restaurant locations. The technician will work directly with our internal IT lead to complete three site installations per day, following a structured 40-45 day schedule. This is an excellent opportunity for a hands-on technician with strong troubleshooting skills and experience working in fast-paced field environments. Key Responsibilities * Travel daily with the IT lead to scheduled restaurant locations * Install, configure, and validate network firewalls * Physically mount and secure network devices and cabling * Ensure proper WAN/LAN connectivity and verify cutover success * Document installation details, network settings, and site validations * Troubleshoot connectivity or hardware issues on-site * Communicate status updates and completion reports to the IT lead * Maintain equipment, tools, and inventory during the rollout * Provide professional customer service to restaurant managers and staff What We Provide * All tools, equipment, and firewalls needed for deployment * Comprehensive daily schedule and routing plan * On-site guidance and mentorship from the IT lead * Mileage reimbursement for travel * Opportunity to gain hands-on experience in large-scale IT rollouts Requirements Requirements * 1-3 years of IT support, network installation, or field technician experience * Strong understanding of networking fundamentals (LAN/WAN, TCP/IP, VLANs, DHCP, VPN) * Experience installing firewalls, routers, access points, or similar hardware * Ability to use basic tools (mounting hardware, cable testers, etc.) * Valid driver's license and reliable transportation * Ability to lift 25-40 lbs and work within equipment racks or tight spaces * Strong documentation and communication skills * Must be punctual, reliable, and comfortable working independently in the field Preferred Qualifications * Experience with restaurant, retail, or multi-site technology environments * Prior experience with Fortinet, Cisco Meraki, SonicWall, or similar firewalls * Knowledge of structured cabling best practices * Experience working alongside senior technicians or project leads Salary Description $40 per hour

DecisiveInstincts, LLC ,a Joint venture betwwen ActioNet and Akamai Intelgence, has an immediate opportunity for a Telecommunications Technician - Electronic Security Systems Support in Newport, RI . This psotions require a Top-Secret Clearance. Primary Responsibilities: • Responsible for all Electronic Security Systems (ESS) residing on client networks. • Technologies supported include LENEL, Bosch, Milestone, Alertus, InformaCast, and Mass Notification systems. • Maintain FICAM HSPD-12 compliance. Required Job Experience: • Support LENEL, Bosch, Milestone, Alertus, InformaCast, and Mass Notification platforms. • Maintain FICAM HSPD-12 and FIPS 140-2 compliance. • Provide onsite technical design, build, install, configure, maintain, and operate ESS. • Work alongside and support employees who administer and operate ESS. • System design, review, installation, programming, updating firmware and software, troubleshooting, service, maintenance, and repair of ESS. • Manage and log work using a ticketing system. • Adhere to Service Level Agreements based on impact and location. • Three years of experience in the low voltage / CCTV / security industry. • In-depth background in security technology and integration. • Technical and analytical comprehension of electronic security industry terms and features. • Ability to read blueprints, architectural, mechanical, and electrical documents. • Proficient in the use of basic hand tools, electrical meters, and relay theory. • Strong customer service skills to anticipate and meet the needs of customers. • Ability to understand technical explanations and effectively convey updates to internal and external audiences. • Maintain certifications, licenses, and registrations in accordance with laws and regulations. • Excellent troubleshooting, diagnostic, planning, and organizational skills in handling multiple projects. • Strong verbal, written, and interpersonal communication skills. • Self-motivated, able to work independently, as part of a team, and under pressure to meet deadlines. • Maintain continuous accountability of supplies, equipment, inventories, and status reports. • Fully document work procedures. • Positive customer orientation and ability to think logically and act decisively in critical situations. Certifications (Required/Preferred): • LENEL and/or Bosch certified technician and CORE certifications are required. • Lenel S2 OnGuard and Milestone certified preferred. ********Direct Applicants, only. No Agencies, No third-party recruiters, please********

The Telecom Technician will participate in the installation or maintenance and inspection of telecommunication systems and associated processes. POSITION RESPONSIBILITIES: Regular attendance at assigned location; may include A/Z office or other project site; Prepares sketches showing location of wiring and equipment, or follows blueprints, insuring that concealed wiring is installed before completion of future walls, ceilings and flooring. Installs cable supports, through floor and wall sleeves, fire stopping materials Oversees or participates in data cable installations, open wiring, with conduit and on cable trays; Installs relays racks, cabinets, network switches. Install cable trays above and below floors Ability to work in confined spaces. Terminates data, voice, coaxial, control and fiber optic cables. Test cables to TIA/EIA level II standards with cable analyzer. Perform other routine duties as directed by workplace leader, Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Additional duties as directed by management. SKILLS & EXPERIENCE/REQUIREMENTS: * Ability to work independently or as part of a team; * Experience: 3-5 years of Field Experience, trade school or apprenticeship; * Be highly focused on customer satisfaction expectations; * Good documentation and record keeping; * Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; * Understanding of and strict adherence to daily Job Hazard Analysis (JHA); * Appropriate state certification or license; * OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: GMP - Aseptic and non-Aseptic Areas and Non GMP Area - Offices spaces A/Z Corporation is an AA/EOE Employer

Join Our Team as a Cable Technician! Are you looking for a rewarding career opportunity? Koscom Cable Inc. is hiring Cable Technicians across the US! Whether you're an experienced pro or just starting out, we want you on our team. Position: Cable Technician Type: 1099 contract Compensation: Weekly pay ranging from $1200-$1700 (experienced techs can earn up to $2000/week) Benefits: Training allowance, weekly paycheck Responsibilities: - Running cables from poles and inside homes (physical fitness required) - Verifying signal levels on cable outlets - Providing TV, Internet, and Phone services for customers - Installing equipment (modems, cable boxes) - Troubleshooting technical issues - Educating customers on our services Requirements: - Own a white VAN or pickup truck (leasing options available) - Valid drivers license - Active Social Security Number - iPhone/iPad for app usage - Conversational English (other languages welcome) - Ability to pass a drug test and background check - Ability to carry heavy objects (like a 28 ft ladder) - No Experience Necessary! We'll provide training to help you succeed. Apply Now! Leave a request and we'll reach out to you. Check out our employees in action: ********************************** ZTrc9afp8 ******************************************* ******************************************* *Applicants must successfully pass a drug test and background check after a conditional offer of employment is made.

Southeastern Council on Alcoholism and Drug Dependence, Inc. (SCADD) is an award-winning organization, and a leading provider of substance use disorder and behavioral health treatment that recognizes our employees as our biggest asset. Join us to find a supportive community dedicated to helping you achieve your fullest potential, and you'll have an opportunity to make a significant and positive impact on the quality of lives and the community. We currently have an exceptional career opportunity for a Fulltime 40 hours per week Recovery Technician to join our team at Braxton House located at 40 Coit Street in New London, CT. Hourly Rate: $18.00 / hour Schedule: 40 hours/ week position, Sunday - Thursday 12:00am to 8:00am overnights. Essential Duties and Responsibilities include but are not limited to: Orient clients to the facility and review program rules and regulations. Complete all non-clinical/non-medical admission paperwork and documentation. Screen incoming client property. Observe medication self-administration. Investigate suspicious or unusual behavior to ensure the safety of clients and premises. Provide the clients with clean linens, towels, and personal supplies. Check and clean laundry and client areas. Answer and direct incoming telephone calls as needed. Monitor the security of the department regularly. Requirements: Highschool Diploma or GED required. Valid Driver's License Required Knowledge of substance use disorder preferred. Bilingualism is a Plus! ***SHIFT DIFFERENTIAL OFFERED FOR 4pm to 12am AND 12am to 8am SHIFTS****** We offer a competitive benefit package so you can further invest in yourself and your future. Full-time positions offer (prorated for select part-time positions): Multiple Medical Plans to choose from to best fit your needs and budget Dental & Vision Insurance 403(b) Retirement Plan with 10% employer match at 1 year Vacation and Sick accruals 11 paid Holidays 40 hours of paid Education/Training hours Paid Licensure Reimbursement SCADD is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Imperial Dade, a leading North American distributor, has a Service Repair Technician role available in Massachusetts / New Hampshire area! Join a strong and continuously evolving group, helping to continue to grow our business. If you're eager for your next opportunity, Imperial Dade is a great place to take that next step. The Service Repair Technician maintains and services housekeeping equipment purchased or leased by our customers. Your hours will be from Monday - Friday from 8:00 am to 5:00 pm, with some overtime. Imperial Dade is the leading independently owned and operated distributor of foodservice packaging and janitorial supplies in North America. As a provider of customized supply chain solutions, we serve customers in many business-to-business market segments including restaurants, grocery stores, healthcare, sports and entertainment, and cruise lines. Founded in 1935 and headquartered in New Jersey, Imperial Dade serves as a mission-critical partner to more than 120,000 customers through our footprint of 130+ branches. **All correspondence will come directly from Imperial Dade and not a personal email address.** Responsibilities You will: Service, maintain, and repair commercial housekeeping equipment, such as carpet extractors, floor scrubbers, and vacuums Establish and maintain strong collaborative relationships with assigned accounts and provide excellent customer service Maintain up-to-date records of services performed Purchase parts and supplies and track inventory Properly demonstrate equipment to customers Coordinate with other departments to ensure customer satisfaction Continually enhance industry and equipment knowledge Follow safety and housekeeping procedures Qualifications You have: High School Diploma, GED, or equivalent experience A valid driver's license and a clean MVR Prior service repair and maintenance experience Electrical and mechanical experience Experience with commercial housekeeping equipment Excellent communication skills We offer a dynamic environment for our more than 7,500 employees to work, learn, and grow professionally. We value our people and strive to create rewarding career opportunities by offering competitive salaries and benefits (medical, dental, vision), a 401(k) program with company match, life insurance, a generous paid time off package, educational reimbursement, paid family leave, and adoption assistance. We are excited to invite talented individuals with a passion for excellence to join our team. Imperial Dade is an EEO Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history, or genetic information, political affiliation, military service, or other non-merit-based factors. Our company is a Fair Chance employer, committed to providing opportunities for qualified individuals with past justice system involvement. We believe in assessing candidates based on their skills and experience. A conditional offer of employment will be contingent upon the successful completion of a background check, consistent with applicable federal, state, and local laws.

Benefits: Competitive salary Dental insurance Health insurance Paid time off Training & development Vision insurance 401(k) matching The Fiberglass and Gelcoat Repair Technician is responsible for performing high-quality repairs on fiberglass boat hulls and structures. This role requires a keen eye for detail, strong technical skills, and the ability to work efficiently to ensure customer satisfaction and safety. JOB DUTIES/RESPONSIBILITIES: Repair and Maintenance: Perform repairs on fiberglass boat hulls, decks, and other structures, including gelcoat repairs, structural repairs, and cosmetic refinishing. Inspection and Diagnosis: Inspect damaged boats to determine the extent of damage and the best repair methods. Use diagnostic tools and techniques to identify issues accurately. Preparation: Prepare surfaces for repair by cleaning, sanding, and masking as necessary. Ensure all surfaces are properly prepped to achieve a high-quality finish. Application: Apply fiberglass matting, resin, and gelcoat to repair damaged areas. Ensure proper curing and finishing techniques are used to match the original appearance and strength. Quality Control: Conduct thorough inspections of completed repairs to ensure they meet quality standards and customer expectations. Address any issues promptly. Documentation: Maintain accurate records of repairs, including work orders, parts used, and time spent on each job. Ensure all documentation is complete and up-to-date. Safety Compliance: Follow all safety protocols and guidelines to ensure a safe working environment. Use personal protective equipment (PPE) as required. Team Collaboration: Work closely with other technicians, service advisors, and management to ensure efficient workflow and high-quality service delivery. Perform related tasks such as shrink wrapping, detailing, pressure washing, bottom painting, bottom scraping, block and stand vessels, and vessel maintenance. REQUIREMENTS: Experience: Minimum of 2 years of experience in fiberglass repair and gelcoat, preferably in a marine environment. Skills: Proficient in fiberglass repair techniques, including gelcoat application, sanding, and finishing. Strong attention to detail and craftsmanship. Knowledge: Understanding of marine safety standards and repair procedures. Familiarity with various types of fiberglass materials and resins. Physical Requirements: Ability to lift heavy objects, stand for extended periods, ascend/descend a ladder and work in various weather conditions. Manual dexterity and hand-eye coordination are essential. Communication: Excellent verbal and written communication skills. Ability to explain technical information to non-technical customers. Certifications: Relevant certifications in fiberglass repair or marine technology are a plus. Work is performed in a workshop environment with exposure to dust, fumes, and noise. May require occasional overtime or weekend work to meet customer demands. Compensation: $26.00 - $35.00 per hour Freedom Boat Club of Greater Boston & Cape Cod Freedom Boat Club of Ocean and Monmouth Counties, New Jersey We are a Freedom Boat Club franchise owned and operated by the Carrick Group LLC/M&M Jersey Marine LLC. We operate 20 Massachusetts club locations and nine New Jersey (north Jersey shore) club locations with our operations center located in Plymouth, MA. Freedom Boat Club is the world's oldest and largest membership boat club with over 30 years of experience offering members access to over 400 locations in the U.S., Canada and Europe. We take care of the maintenance, cleaning, repair, insurance and storage. The fleet includes bowriders, pontoons, and center console fishing boats. ******************************** We work in this field because it's fun! Solitude. Fishing. Adventure. Sandbars. Sightseeing. Watersports. Family Time. This is why we do it. We do it for the fun. We do it for the firsts. We do it because we love to see the smiles, the pictures, the fish, and the accomplishment. We truly get joy from witnessing the joy we bring to others. Some would say we work so you can play. While we don't disagree, we don't always feel like what we do is work. We're pretty committed to the concept of successful and casual. Suits and ties have no place here, we traded those in long ago for boat shoes and sunscreen.

General Statement of Duties: Under general supervision, performs a variety of building maintenance work including some minor electrical, mechanical, plumbing, construction, modification, landscape, and repair activities in commercial and residential settings to ensure all locations are maintained in a safe and effective working condition. Responsibilities: Performs maintenance duties including but not limited to minor electrical and plumbing work and repair, snow removal, light carpentry, painting, general building maintenance as assigned by supervisor or designee. Completes daily logs of all work performed recording receipts of any associated expenditures. Checks FinishLinePro Facilities Work Order system before going into a program to make sure all open work orders are completed and recorded in FinishLinePro . Schedules work priorities with supervisor on a regular basis. Maintain ongoing professional, timely, and accurate communication with supervisor and all stakeholders. Identifies potential problems and performs preventative maintenance and repair work as required. Responds to emergency situations as required, makes immediate repairs as appropriate, for further assistance Observes and implements appropriate safety practices while performing all duties, including driving, and follows all applicable laws, codes and standards, safety and environmental regulations and departmental and agency policies, procedures and protocols. Assists with other Facility Department responsibilities as required, including, but not limited to, painting, cleaning shop and vehicles, picking up supplies, moving furnishings/equipment involving persons served and/or administration staff. Repairs, as needed, appliances, including, but not limited to, washers, dryers, and ovens. Drives BAMSI vehicles from one work site to another. Conducts work in a professional and mature manner being courteous and respectful to persons served, staff, facility management, and the public in all locations. Responsible for securely, carefully and appropriately maintaining tools, equipment, vehicles, furnishings and real property. Provide on call coverage on a rotating basis. Qualifications, Skills and Abilities: High school diploma or general equivalency diploma (GED) and at least one year of experience in property maintenance. General aptitude for all functional areas of facilities maintenance, including HVAC, Electrical, Painting, Carpentry and Plumbing, landscape, and demonstrated competency in at least two of these areas. Possession of valid driver's license and satisfactory driving record. Must have the ability to regularly climb ladders, to lift and move objects weighing up to 100 pounds and to work in outdoor environments in a variety of weather conditions. Must possess knowledge, experience and skill in the use of use of various hand and power tools. Must be able to pass criminal background check (CORI). Demonstrated organizational, project management and time management skills. Frequently working alone or without close supervision, must demonstrate a strong self-directed work ethic and trustworthiness. Must successfully complete all BAMSI training and refresher training with required timelines. M-F 40hrs 40 hrs/M-F 40

Spear AI is seeking an entry level technician. You will be part of a cross functional team designing, building, testing, and deploying unmanned maritime sensor systems. The initial focus is on acoustics but will quickly expand to other modalities as well as to mobile systems.This is an opportunity for someone one to start a new career by joining a fast-growing, fast-moving, high-tech team, learn new skills, and build a real career. Rapid career growth is possible with in-house promotion potential to six figure income over time. Specific prior experience is not required, but an excellent work ethic, and excellent attitude, and an attention to detail is mandatory.Spear AI serves the national security industry and provides hardware, software, and data solutions that span levels of classification and are intended for operational deployment. Spear AI is a rapidly growing company with a commitment to rapid development of excellent products through continuous fielding. You will be in the lab and out on the water frequently.Responsibilities You will work with other technicians and engineers to build, assemble, and test sensor systems. You will be assigned a variety of tasks building or repairing parts that will include soldering, assembly, basic machining (drilling, cutting, etc), crimping, and similar tasks. You will participate in field testing by deploying and recovering systems in the water, preparing systems for the water, or servicing them after they are recovered You will perform a variety of routine maintenance tasks on machinery and tools You will help manage inventory and parts You will undertake such other tasks as may be assigned. Required Qualifications Exemplary attention to detail, a focus on quality, and an uncompromising focus on safety. An excellent attitude and work ethic. Some prior experience working with your hands whether professionally, academically or as a hobby. Examples could include working on cars or boats, helping with home renovations, lego robotics leagues, vocational classes, etc. Suitable written and verbal communication skills for the job Ability to physically participate in at sea deployment, test, and recovery operations including ability to lift, carry, and maneuver on a small boat at sea, communicate verbally, and carry out fine manipulations. You may be asked to obtain a SECRET security clearance. This will be at no expense to you. For resources on what a security background involves and what disqualifies people reference the CIA requirements. This does preclude any level of recreational drug use including Marijuana if you are asked to obtain a clearance. Desired Qualifications Prior experience with various mechanical and electrical fabrication and repair techniques Basic computer familiarity (google suite, MS Office, etc) Small boat experience Basic familiarity with linux Experience with basic electrical troubleshooting tools (multimeter etc) Any prior machining experience Veteran status or significant familiarity with interacting with both enlisted and commissioned military personnel. We hope you'll join our fast-growing team! We hope you'll join our fast-growing team!

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Provides day-to-day monitoring and basic plant and pump/booster station operations, routine lab tests and basic corrective and preventative maintenance activities. Primary Duties/Responsibilities: Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures. Monitors and observes operating conditions, records observations and data in shift log. Diagnoses basic operational problems and takes corrective action per procedure. Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database. Promptly reports any operational problems with machines or equipment to Lead or Supervisor. Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule. Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units. Prepares chemical solutions, monitors supplies and recommends reorder. Performs routine lab tests and prepares reports per procedure. Performs routine instrument calibration for portable meters including, but not limited to, dissolved oxygen, pH, H2S, percent oxygen, lower explosive limit. Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating condition is restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation. Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes. Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint. Learns to estimate time and material costs for various projects. May assist in other areas of facility as directed. Work Environment: Spends 100% of the time in operations environment. Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required. Travels 1 - 2 times per year for company provided training. May be required to travel up to five consecutive days. May serve rotational 24-hour emergency on-call. Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards. Qualifications Education/Experience/Background: High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions. Six months to two years of experience in a related position with experience in a similar environment preferred with ability to comprehend specifications, blueprints and manuals. Experience using material handling equipment, pressure gauges and precision measuring instruments. Experience using power, pneumatic, hydraulic and hand tools and shop tools such as drill press, band saw, bench grinder, torque wrench preferred. Knowledge/Skills/Abilities: Ability to perform basic mathematical calculations. Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment. Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action. Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System, and laboratory/industrial pretreatment QA/QC. Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals. Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily. Must be able to serve rotational 24-hour emergency on-call if required by site. Required Certification/Licenses/Training: Minimum water/wastewater license as required by regulatory agency at site. Must possess a valid driver's license and a safe driving record. Employee Orientation, Departmental Operating Procedures, Safety, OSHA and Quality Training. HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Obtain and maintain minimum water / wastewater operator state certification. Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.) Forklift Certification if required by site. Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems. Obtain HVAC, Electrician, Plumber's or other trade License if assigned to that area. Note: Tech will not perform duties unless properly licensed. Training in the use of energy management systems as needed. Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications. May perform more advanced functions as part of training and development. Physical Requirements: Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift. Requires close visual and hearing observation to detect non-conformance and machine malfunction. Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds. Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. Occasional stooping, bending or kneeling and entering confined spaces. Additional Information Pay Range: $27.00 to $32.00 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Position Title Facilities Support Technician Department Event Support Pay Type Non Exempt Appointment Type (A) Continuing Full-Time Hours Per Week 40 Number of weeks 52 weeks per year other - # of weeks 52 Benefits Eligible Full Benefits Geographical Regional Qualifies for Relocation Reimbursement No Work Schedule Job Description General Scope of Duties Perform various tasks involving setting up and breaking down event equipment, picking up and delivering supplies and material, moving furniture and equipment, providing custodial and maintenance services to maintain clean and attractive areas within assigned buildings, and other duties as assigned. General Duties and Responsibilities * Support events inside and outside by supplying, delivering, installing, and removing a wide variety of material and equipment arranged as requested by the customer using sketches, diagrams, and work orders including: tents, chairs, tables, podiums, flags, flagpoles, banners, coat racks and other items as requested. * Required to be available outside of the College's normal administrative office hours. Assist custodial activities and be physically present for events such as but not limited to Commencement, Alumni Reunion weekend, First Year Move-in Day and Parents Weekend; must stay until job is completed for major events. * Pickup and load into assigned vehicle a wide variety of material and equipment from various offices and locations throughout the Campus and deliver and unload them at their proper destination on or off Campus. * Ensure proper care in the use and maintenance of equipment and supplies; promote continuous improvement of workplace safety and environmental practices. * Perform daily pickup of residence hall trash as directed. * Support other Facilities Management departmental activities as assigned. * Operate a service vehicle as required to perform duties. Education and Skills * A combination of education and experience that provides a demonstrated knowledge of general maintenance duties required. * Ability to effectively and safely operate a variety of vehicles, tools and equipment necessary to carry out assignments including box truck, cube van, cargo van, pickup truck, burnishers, scrubbers, extractors, buffers, and various types of vacuums. * Interpersonal skills; oral and written communication skills. * Ability to keep shop records, follow directions * Ability to utilize computer software (CMMS). * Must possess and maintain a valid driver's license * Ability to frequently lift up to 75 pounds unaided. * High integrity needed to handle confidential information.`1 Preferred Qualifications Physical Demands * Ability to frequently lift up to 75 pounds unaided. Driving Required Yes Salary Range $21.98 Note Connecticut College is committed to fair and competitive compensation. The final offer will reflect the candidate's experience, education, and the institution's pay structure to ensure internal equity. Applicant Credentialing Thorough applicant credentialing will be conducted on the selected candidate which will include criminal records check, DMV check and depending on the position psychological exam and pre-placement physical. Posting Detail Information Open Date 10/14/2025 Applications accepted through Open Until Filled Yes

Job Description Hogan Tire & Auto in Westwood is seeking a Full-time Automotive Alignment Technician. At Hogan Tire & Auto in Westwood we are redefining the tire and automotive service experience through a technology-forward approach, prioritizing customer satisfaction and workforce engagement. We are committed to fostering a culture where our teammates drive the highest levels of customer satisfaction. Opportunity: Join a customer and workforce-centric company that is dedicated to excellence in automotive service. Your expertise, leadership, and commitment to excellence will drive our success and uphold our reputation as a leader in the automotive service industry. Position Overview: As a Full-time Automotive Alignment Technician at Hogan Tire & Auto in Westwood, you hold a pivotal position in upholding our commitment to excellence in automotive service. Your role extends beyond technical prowess and professionalism to encompass a deep dedication to providing the highest levels of customer service, guiding customers through informed vehicle repair decisions with transparency and clarity. Your expertise in vehicle repair, combined with a firm grasp of productivity standards sets the standard for operational efficiency and customer satisfaction. A Full-time Automotive Alignment Technician performs wheel alignments and related services, including diagnosing and repairing steering and suspension issues. Responsibilities include safely securing vehicles on alignment equipment, performing precise adjustments according to specifications, and handling tire and wheel services like mounting, dismounting, and balancing. Key Responsibilities: Perform alignments: Use alignment machinery to align vehicles to company specifications. Tire and wheel services: Dismount, mount, and balance tires and wheels, ensuring no damage occurs. Diagnose and repair: Identify and fix issues with steering, suspension, and brakes. Vehicle handling: Safely drive vehicles onto the alignment machine, secure them, and remove them upon completion. Equipment operation: Operate all related equipment and tools as trained. Customer service: Interact with customers, provide service recommendations, and ensure customer satisfaction. Documentation: Accurately document all work performed and recommended on the repair order. Inspections: Conduct vehicle maintenance and safety inspections, reporting any necessary repairs or issues. Qualifications: Experience in tire mounting, balancing, and basic auto mechanics is strongly preferred. Knowledge of suspension and steering systems, including toe, caster, and camber adjustments, is essential Experience with tire equipment, tools, and alignments is required. Experience working with Hunter Alignment equipment is preferred. Demonstrate mastery in automotive service repair, ensuring that vehicles are repaired to meet manufacturer specifications and company's standards of quality and customer experience. Provide exceptional customer service by engaging with customers in a transparent and informative manner, guiding them through service decisions with clarity and professionalism. Mentor junior technicians, sharing knowledge and expertise to support their growth and development within the operation. Collaborate with the service team to streamline operations and ensure the seamless delivery of automotive services that exceed customer expectations. Manufacturer-trained and/or ASE Certified with a proven record of accomplishment of excellence in vehicle repair and customer service. Effective communication skills and the ability to convey complex technical information to customers clearly and understandably. Dedication to upholding the company's standards of excellence in automotive service and customer experience. Certifications and Specialized Training SPC Alignment Training or Snap-on Wheel Service Certification, which offer advanced technical instruction in alignment equipment, diagnosis, and precision adjustments ASE Certification in Suspension and Steering (A5) verifies professional competency Other ASE automotive certifications such as brakes (A4) may enhance employability Benefits: We Offer Weekly Payroll Retirement Services of 401(k) or Roth Medical, Dental and Vision insurance options Employer Paid Life Insurance Plan up to $50,000 Employee, Dependent and Supplemental Insurance Accrual of Paid Time Off in first year and Paid Holidays Assistance Program Employment Eligibility: A Formal Application for Employment and Background Screening Authorization is required. Applicants must hold a current and valid driver's license. If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.