Welder fitter jobs in Deptford, NJ - 54 jobs

DC Fabricators Inc. is the leader in the design, technology and manufacturing of steam condensers and heat exchangers that support the US Navy Submarine, Aircraft Carrier and other programs. Our facility specializes in corrosion resistant alloy and dissimilar metal fabrications. DCF has an extensive history of excellent performance in development, design and manufacturing, meeting the critical requirements of the US Navy for the prime contractors and shipyards. We are looking for a Fitter/Fabricator to join our team in Florence, NJ! 2nd shift - 3:30pm-12:00am $30.00-$37.34 max DOE The Fitter/Fabricator is concerned with reading and understanding assembly instructions, steel blueprints and ensuring that the required parts are present and meeting quality control standards. Essential Duties of the Fitter/Fabricator: * Manufacturer an assortment of products using various raw materials, tools, and their own hand tools. * Responsible for reading and understanding assembly instructions; fitting of parts to meet drawing and other specifications to allow the part to be welded properly. * Fitting of parts includes plasma cutting, gas burning, and grinding as required to align and secure parts to meet the drawings and anticipated weld distortion. * Understand the importance of safely handling of assemblies and the proper operation of overhead cranes and other material handling equipment. * Provides guidance and direction to the hourly personnel assigned to the department/shift, including but not limited to providing personnel training. * Adheres to required MIL specifications. * All other duties as assigned. Preferred Qualifications: * GMAW-P - 2209, 625, 316 * GMAW-P - 100S, 70S * GTAW - 2209, 625, 316, 82 * GTAW - 100S, 70S * GMAW-P - CuNi 67 * GTAW - NiCu-7 67 * Small Dia Pipe - 2209, 625, 316 * Socket Weld - Stainless Education/Experience: High School/Trade School diploma. Must have at least three (3) years of relevant Fabrication experience. Basic computer skills required. Must be able to read blueprints. Must be able to use welding, plate cutting, and grinding tools Must be able to work with minimal supervision. Properly trained to operate cranes safely Must have manual dexterity, accuracy, and attention to detail. Must have knowledge of metal properties and other material. Must have mathematical skills and analytical abilities. Job Type: Full-time Pay: $30.00 - $37.34 per hour Benefits: * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Paid time off * Vision insurance Location: * Florence, NJ 08518 (Preferred) Work Location: In person

Job Description Pipe Welder Wanted APEX Mechanical & Fabrication is a leading provider of industrial piping services. Specializing in welding and installation projects for a wide range of sectors including construction, oil and gas, and manufacturing. We are currently seeking a highly skilled Pipe Welder to join our team. Responsibilities: Weld and fabricate pipe systems according to blueprints and specifications. Perform welding techniques such as TIG, MIG, Stick, and Flux Core. Ensure the integrity and quality of welded joints using appropriate inspection methods. Adhere to all safety protocols and industry standards during welding operations. Maintain tools, equipment, and a clean work environment. Collaborate with other team members to complete projects on time. Qualifications: Proven experience as a Pipe Welder or similar role. Proficiency in welding techniques (TIG, MIG, Stick). Ability to read and interpret blueprints and technical drawings. Strong attention to detail and problem-solving skills. Valid welding certifications (e.g., AWS, ASME) are preferred. Ability to work in various environments, including outdoors and in confined spaces. Ability to lift heavy materials and work in physically demanding conditions. Benefits: Competitive pay based on experience. Health, dental, and vision insurance. Paid time off and holidays. Opportunities for advancement and skill development. Safe and supportive work environment.

Come work with us, not for us! 2nd Swing is a one of a kind, forward thinking, customer-centric golf retail company. Our employees are highly-valued, while working hard in a positive and supportive culture. At 2nd Swing you will find: Vast Exposure to the Golf Industry A Commitment to Total Well-Being Opportunities to Discover Your Fit and Make an Impact A Collaborative and Flexible Environment Position Summary: 2nd Swing Golf is proud to offer a new and exciting opportunity for individuals who are interested in Club Fitting. We are launching an 18 month program for those seeking an intensive pathway to becoming a Certified Club Fitter within our company. The ultimate goal of this rigorous program is to equip participants with the skills and knowledge necessary to excel as a Club Fitter. As a Fitter in Training, you'll embark on a comprehensive and immersive journey designed to develop your expertise in club fitting and sales. Learning the business as a store associate, participants will engage in specific training, mentoring and hands-on experience leading to a position as a 2nd Swing Certified Club Fitter. Please be aware that admission into this highly selective program will be limited to only the most qualified and motivated individuals who demonstrate a strong aptitude and interest in club fitting. Qualified candidates must be eager to learn, dedicated to professional growth, possess a desire to give back to the game of golf and committed to providing exceptional service to our customers. Responsibilities: In order to learn the entirety of our retail business at the store level, each participant in the program will spend time in the following areas : Building rapport with golfers Creating positive, engaging and best in industry one-on-one fitting experiences Utilization of Trackman launch monitors, Quintic and Foresight systems to facilitate fittings Guiding golfers through the equipment selection process Product merchandising and organization Extending customer service through trade-in transactions and point-of-sale Executing club repair Accomplishing related tasks as needed Qualifications: A passion for the game of golf Experience as a tournament or college level player Above average knowledge of golf equipment and technology Aptitude for understanding the technical aspects of golf equipment Previous employment in golf industry (Preferred) Full-Time Benefits: Employee Programs such as PGA membership dues support Paid Time Off 401k company match Health Insurance HSA/FSA Discounted Merchandise Continued Training and Development Health and Wellness Initiatives Work Life Balance Compensation: $24 - $28 per hour based on golf experience

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a Welder to join our team. This role will be on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday. at our Darrah St location. Responsibilities: Perform Welding Operations: Welding thin, light gauge nickel alloy & stainless steel metal (0.020 - .125in). Maintain Welding Equipment: Ensure welding equipment is in good working condition by conducting regular maintenance and repairs. Report any malfunctions or issues to the supervisor. Setting up a GTAW machine, including hookup to their own shielding gas cylinders Quality Control: Inspect welded joints and structures to ensure they meet quality standards and specifications. Ability to perform certain quality inspections on their own work through use of measuring tools, specifically calipers. Follow Safety Procedures: Adhere to safety protocols and guidelines to prevent accidents and injuries. Use personal protective equipment (PPE) and follow proper safety procedures during welding operations. Collaborate with Team: Work closely with engineers, fabricators, and other team members to complete projects efficiently and accurately. Communicate effectively to ensure tasks are completed on time and to specifications. Hands-on work: Roll-forming sheet metal. Comprehension of drawings: Reading, reasoning, and fabricating from blue prints, shop drawings, and standard work procedures. Requirements: Welding Experience: Minimum of 1 year of experience in welding operations, preferably in a manufacturing or industrial setting. Experience with various welding processes with sheet metal or comparable materials. Technical Skills: Proficient in reading and interpreting engineering drawings, blueprints, and welding symbols. Strong understanding of metallurgy and welding principles. Certifications: Possess relevant welding certifications such as AWS (American Welding Society) certification or equivalent. Additional certifications in specific welding techniques or materials may be preferred. Attention to Detail: Ability to work with precision and attention to detail to produce high-quality welds and assemblies. Familiarity with quality control techniques and inspection procedures is essential. Safety Awareness: Knowledge of safety protocols and procedures related to welding operations. Demonstrated commitment to maintaining a safe working environment for oneself and others. Teamwork and Communication: Excellent teamwork and communication skills to collaborate effectively with colleagues and convey information accurately. Physical Stamina: Ability to stand for extended periods, lift heavy materials, and work in various positions and environments. Good physical stamina and dexterity are required for welding tasks. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:00AM-4:30PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads' capabilities enable our customers to achieve superior results by deploying our diverse, highly skilled workforce and fabrication capabilities across commercial, government and maritime projects, all backed by state‐of‐the‐art resources and a 100+ year legacy of leadership. As a member of the Rhoads team, you'll join a quickly growing team of energetic, skilled tradespeople and professionals who are committed to delivering exceptional products and services to our customers across every market we serve. We are building on our success across more than a century by continuing to grow an innovative company dedicated to building exciting careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex pipe spools and complex piping systems to work packages, drawings, PI&Ds per ASME B31.1 and MIL TP278, to production schedule under the guidance of the shop superintendent. What You Will Be Doing Perform pipe welding with pipe fitting experience using knowledge of codes and specifications Reads and deciphers work packages, work scope, engineered drawings, and PI&Ds Works with the pipe shop group with a focus on quality, customer compliance, and schedule Assemble piping spools, weld, test, and assure all shop packages are complete, and work is compliant before presenting to QA Assures welding equipment is in good working condition and reports any malfunctions or maintenance needed Have all personal gear to perform pipe welding and fitting including welding gear, measuring devices, levels square, etc. maintained in good condition Additional duties as assigned Your Background High school Graduate, related to Trade school and no less than 5 years' work history/experience in this industry required Have experience in GTAW processes. Must qualify to Pipe in the 6-G position Per ASME Section IX using the GTAW process. Experience in structural welding using GMAW in various positions to AWS D1.1. Proven past welding qualification history is a plus Decipher welding symbols, reads, and follows work packages, drawings, PI&Ds, and blueprints Use various measuring equipment Full range of mechanical knowledge as well as the ability to fabricate and install piping on equipment as specified on drawings and PI&Ds 5+ years of experience Able to work in a team environment and self-motivated. US Citizenship required Able to work overtime when needed Have all the necessary hand tools to perform their discipline and maintain in good working order Supply their own transportation to and from Rhoads Industries, able to work within the Navy Yard and other job sites at times when requested OSHA /10 safety training required provided by Rhoads, having an up-to-date OSHA/10 a plus Experience in MIL work Per TP278 and past qualifications to TP248 is a plus Various shifts may be required, including overtime and weekends The Work Environment at Rhoads The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required. What Rhoads Can Offer You At Rhoads Industries, our team is the foundation of our success. Along with a competitive salary, we offer a variety of additional benefits designed to support your well-being and promote a healthy work-life balance for you and your family. Benefits include: Competitive health insurance packages 401k matching PTO Our Location We are based out of The Navy Yard in Philadelphia, a reimagined industrial locale with more than 150 companies, 15,000+ people, 20 acres of parks, dining options, public art, and events throughout the year. Recognized as a leading model for repurposing military and industrial assets for a diversified modern economy, The Navy Yard has been dubbed “the coolest shipyard in America.” For more information about Rhoads Industries and our opportunities please visit RhoadsInc.com and follow us on LinkedIn. Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability.

Temp Now Hiring: Flux Core Welders Long Term Project Wages: $28.00 Per Hour $150.00 Per Diem Experience: 5+ years' work experience welding. Must have current experience with flux core welding. Must have current experience with ceramic tape backing. Essential Functions: Knowledge and proficiency of heavy shipyard construction welding in all positions. Welding process includes: - FCAW - Flux Core Arc Welding Knowledge, understanding and demonstration of interpreting approved Welding Procedure Specifications. Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation. Welder must proficiently demonstrate welding ability through performance and testing as determined by project. Performs other related duties as required and assigned. - Must successfully pass 1st class skill test - 2G & 3G Ceramic Backed Test - Must Successfully pass a background check and drug test - Must be willing to work any shift and overtime if required. To Apply: Submit an up-to-date resume for review.

Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other team members and departments. Must be able to stand for the duration of the shift and able to lift up to 50lbs unassisted. Conduct quality workmanship, attention to detail and customers' satisfaction. Ability to read and comprehend blueprints. Practice safe work habits, follow safety guidelines, and support company safety initiatives. Perform daily organization and cleanup of work area. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Job DescriptionDescription Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive and professional appearance Serve the customer's needs through prompt, thorough and professional service Understand all weld procedures used by RD&S and perform visual quality checks throughout the installation of the system Complete daily/weekly work logs Travel as required and stay out of town on a job up to 10 days, occasionally longer. Weld Carbon Steel and Stainless-Steel refrigeration pipe per RD&S WPS B31.5 standards and Structural D1.1. Cost for WTTI to issue weld certification will be paid for by RD&S. Time to complete certifications will be on employee. This must be completed prior to or within 90 days of employment. Read and understand drawings associated with the installation of an industrial refrigeration system and efficiently install sections of system as directed. Attend all company sponsored events. Attend all required company meetings, construction meetings, and monthly safety meetings. Supply personal hand tools and welding shield as required for this position. Complete the OSHA 10 online course prior to start date. This online training course will be paid for by RD&S. Skills, Knowledge and ExpertiseRequired Skills/Abilities: Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Ability to get a TWIC card to work at facilities operated under Dept of Homeland Security Must be able to get a clean DOT physical. Welding trucks fall under DOT regulations Education, Certifications, and Experience: OSHA-10 required. Completion of a formal apprenticeship OR successful completion of an in-company, training program preferred. Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 15 pounds at a time. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. Benefits Healthcare (medical, dental, vision, prescription drugs) Health Reimbursement Arrangement (shared cost deductible) Flexible Spending Account Dependent Care Account Accident Insurance Life Insurance AD&D Insurance Short/Long Term Disability Employer matched 401(k) savings plan Paid vacation time Paid sick time Generous paid holiday schedule

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications . · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys . · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR sCkIDpzNuh

STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Entry Level, Level 1 or Level 2, responsible for TIG/GTAW welding formed sheet metal and cast metal components. This position provides welded metal components which are used to support and fabricate our entire line of products including CleanMount, Vertica, Mobile Stations, and Suite-Stations. Join a team and company with endless innovative visions in a rapidly growing, leading industry! JOB DESCRIPTION: Operate a TIG welding machine to join metal together based on provided engineering print. Fit, tack, and weld metal which include various sizes and shapes from either the press brake, laser cutter, or cast parts. Welding includes components with both square and curved surfaces. Maintain and ensure quality and aesthetic standards for custom, made to order HMI systems. REQUIREMENTS: Prior experience TIG welding thin gauge stainless steel, mild steel, and aluminum a must (typically 14-gauge 304 stainless steel and 14-guage CRS). Experience reading engineering prints and welding symbols a must. Able to use and read various measuring devices such as calipers and protractors. Knowledge of the different types of metal used at STRONGARM (stainless steel, CRS, and aluminum) Knowledge of sheet metal gauges. Prior knowledge and ability to weld all typical types of joints (including butt joints, lap joints, corner joints, tree joints, and edge joints) Able to stand, bend, lift, and/or walk for 2+ hours at a time. RESPONSIBILITIES: Join metal together using a TIG welding machine including both square and curved surfaces. Perform measurements/inspection to ensure conformance to work orders and engineering print specifications such as flatness, parallelism, and dimensional tolerances. Fill non-conforming materials reports for incoming materials that are out of spec or defective. Ensure quality and aesthetic standards are maintained. Clock in and out of work order travelers using the VISUAL bar code system. Follow the daily production schedule. Perform within the parameters of STRONGARM's policies and procedures. BENEFITS CRAFTED FOR YOU: Competitive compensation based on experience and certification PTO (including sick and personal days) 401K, Health insurance, vision, dental STRONGARM swag Biyearly bonuses & yearly raises based on performance reviews STRONGARM Designs is looking for high-energy, mechanically inclined individuals with a positive attitude and willingness to learn. We at STRONGARM are committed to continuous improvement and seek driven candidates who wish to grow and develop professionally.

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off About the Role: Join United Plastics Machinery LLC as a Welder Fabricator and become an integral part of our innovative manufacturing team in Exton, PA. We are looking for skilled individuals who are passionate about precision welding and fabrication to help us deliver top-quality machinery solutions to our clients. Responsibilities: Perform welding on various materials including steel. Read and interpret blueprints and technical drawings to execute fabrication tasks accurately. Assemble and fit components according to specifications to ensure structural integrity. Conduct quality inspections on finished products to ensure adherence to industry standards. Maintain a clean and safe working environment by following safety protocols and regulations. Collaborate with team members to optimize production processes and improve efficiency. Utilize hand tools and welding equipment effectively to complete projects on time. Requirements: High school diploma or equivalent; vocational training in welding preferred. Minimum of 2 years of welding experience in a manufacturing environment. Proficient in welding techniques with a strong attention to detail. Ability to read and understand technical drawings and blueprints. Strong problem-solving skills and a proactive approach to work. Excellent communication and teamwork abilities. Willingness to comply with safety standards and regulations. About Us: United Plastics Machinery LLC has been a leader in the equipment manufacturing industry for over 50 years, known for our commitment to quality and innovation. Our customers appreciate our tailored solutions and exceptional service, while our employees enjoy a collaborative and supportive work environment that fosters growth and development.

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a Welder to join our team. This role will be on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday. at our Darrah St location. Responsibilities: Perform Welding Operations: Welding thin, light gauge nickel alloy & stainless steel metal (0.020 - .125in). Maintain Welding Equipment: Ensure welding equipment is in good working condition by conducting regular maintenance and repairs. Report any malfunctions or issues to the supervisor. Setting up a GTAW machine, including hookup to their own shielding gas cylinders Quality Control: Inspect welded joints and structures to ensure they meet quality standards and specifications. Ability to perform certain quality inspections on their own work through use of measuring tools, specifically calipers. Follow Safety Procedures: Adhere to safety protocols and guidelines to prevent accidents and injuries. Use personal protective equipment (PPE) and follow proper safety procedures during welding operations. Collaborate with Team: Work closely with engineers, fabricators, and other team members to complete projects efficiently and accurately. Communicate effectively to ensure tasks are completed on time and to specifications. Hands-on work: Roll-forming sheet metal. Comprehension of drawings: Reading, reasoning, and fabricating from blue prints, shop drawings, and standard work procedures. Requirements: Welding Experience: Minimum of 1 year of experience in welding operations, preferably in a manufacturing or industrial setting. Experience with various welding processes with sheet metal or comparable materials. Technical Skills: Proficient in reading and interpreting engineering drawings, blueprints, and welding symbols. Strong understanding of metallurgy and welding principles. Certifications: Possess relevant welding certifications such as AWS (American Welding Society) certification or equivalent. Additional certifications in specific welding techniques or materials may be preferred. Attention to Detail: Ability to work with precision and attention to detail to produce high-quality welds and assemblies. Familiarity with quality control techniques and inspection procedures is essential. Safety Awareness: Knowledge of safety protocols and procedures related to welding operations. Demonstrated commitment to maintaining a safe working environment for oneself and others. Teamwork and Communication: Excellent teamwork and communication skills to collaborate effectively with colleagues and convey information accurately. Physical Stamina: Ability to stand for extended periods, lift heavy materials, and work in various positions and environments. Good physical stamina and dexterity are required for welding tasks. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:00AM-4:30PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Pipe Welder Wanted APEX Mechanical & Fabrication is a leading provider of industrial piping services. Specializing in welding and installation projects for a wide range of sectors including construction, oil and gas, and manufacturing. We are currently seeking a highly skilled Pipe Welder to join our team. Responsibilities : Weld and fabricate pipe systems according to blueprints and specifications. Perform welding techniques such as TIG, MIG, Stick, and Flux Core. Ensure the integrity and quality of welded joints using appropriate inspection methods. Adhere to all safety protocols and industry standards during welding operations. Maintain tools, equipment, and a clean work environment. Collaborate with other team members to complete projects on time. Qualifications : Proven experience as a Pipe Welder or similar role. Proficiency in welding techniques (TIG, MIG, Stick). Ability to read and interpret blueprints and technical drawings. Strong attention to detail and problem-solving skills. Valid welding certifications (e.g., AWS, ASME) are preferred. Ability to work in various environments, including outdoors and in confined spaces. Ability to lift heavy materials and work in physically demanding conditions. Benefits : Competitive pay based on experience. Health, dental, and vision insurance. Paid time off and holidays. Opportunities for advancement and skill development. Safe and supportive work environment.

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionDescription Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive and professional appearance Serve the customer's needs through prompt, thorough and professional service Understand all weld procedures used by RD&S and perform visual quality checks throughout the installation of the system Complete daily/weekly work logs Travel as required and stay out of town on a job up to 10 days, occasionally longer. Weld Carbon Steel and Stainless-Steel refrigeration pipe per RD&S WPS B31.5 standards and Structural D1.1. Cost for WTTI to issue weld certification will be paid for by RD&S. Time to complete certifications will be on employee. This must be completed prior to or within 90 days of employment. Read and understand drawings associated with the installation of an industrial refrigeration system and efficiently install sections of system as directed. Attend all company sponsored events. Attend all required company meetings, construction meetings, and monthly safety meetings. Supply personal hand tools and welding shield as required for this position. Complete the OSHA 10 online course prior to start date. This online training course will be paid for by RD&S. Skills Knowledge and ExpertiseRequired Skills/Abilities: Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Ability to get a TWIC card to work at facilities operated under Dept of Homeland Security Must be able to get a clean DOT physical. Welding trucks fall under DOT regulations Education, Certifications, and Experience: OSHA-10 required. Completion of a formal apprenticeship OR successful completion of an in-company, training program preferred. Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 15 pounds at a time. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.

STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Entry Level, Level 1 or Level 2, responsible for TIG/GTAW welding formed sheet metal and cast metal components. This position provides welded metal components which are used to support and fabricate our entire line of products including CleanMount, Vertica, Mobile Stations, and Suite-Stations. Join a team and company with endless innovative visions in a rapidly growing, leading industry! JOB DESCRIPTION: Operate a TIG welding machine to join metal together based on provided engineering print. Fit, tack, and weld metal which include various sizes and shapes from either the press brake, laser cutter, or cast parts. Welding includes components with both square and curved surfaces. Maintain and ensure quality and aesthetic standards for custom, made to order HMI systems. REQUIREMENTS: Prior experience TIG welding thin gauge stainless steel, mild steel, and aluminum a must (typically 14-gauge 304 stainless steel and 14-guage CRS). Experience reading engineering prints and welding symbols a must. Able to use and read various measuring devices such as calipers and protractors. Knowledge of the different types of metal used at STRONGARM (stainless steel, CRS, and aluminum) Knowledge of sheet metal gauges. Prior knowledge and ability to weld all typical types of joints (including butt joints, lap joints, corner joints, tree joints, and edge joints) Able to stand, bend, lift, and/or walk for 2+ hours at a time. RESPONSIBILITIES: Join metal together using a TIG welding machine including both square and curved surfaces. Perform measurements/inspection to ensure conformance to work orders and engineering print specifications such as flatness, parallelism, and dimensional tolerances. Fill non-conforming materials reports for incoming materials that are out of spec or defective. Ensure quality and aesthetic standards are maintained. Clock in and out of work order travelers using the VISUAL bar code system. Follow the daily production schedule. Perform within the parameters of STRONGARM's policies and procedures. BENEFITS CRAFTED FOR YOU: Competitive compensation based on experience and certification PTO (including sick and personal days) 401K, Health insurance, vision, dental STRONGARM swag Biyearly bonuses & yearly raises based on performance reviews STRONGARM Designs is looking for high-energy, mechanically inclined individuals with a positive attitude and willingness to learn. We at STRONGARM are committed to continuous improvement and seek driven candidates who wish to grow and develop professionally.