Welder fitter jobs in Horsham, PA - 65 jobs

DC Fabricators Inc. is the leader in the design, technology and manufacturing of steam condensers and heat exchangers that support the US Navy Submarine, Aircraft Carrier and other programs. Our facility specializes in corrosion resistant alloy and dissimilar metal fabrications. DCF has an extensive history of excellent performance in development, design and manufacturing, meeting the critical requirements of the US Navy for the prime contractors and shipyards. We are looking for a Fitter/Fabricator to join our team in Florence, NJ! 2nd shift - 3:30pm-12:00am $30.00-$37.34 max DOE The Fitter/Fabricator is concerned with reading and understanding assembly instructions, steel blueprints and ensuring that the required parts are present and meeting quality control standards. Essential Duties of the Fitter/Fabricator: * Manufacturer an assortment of products using various raw materials, tools, and their own hand tools. * Responsible for reading and understanding assembly instructions; fitting of parts to meet drawing and other specifications to allow the part to be welded properly. * Fitting of parts includes plasma cutting, gas burning, and grinding as required to align and secure parts to meet the drawings and anticipated weld distortion. * Understand the importance of safely handling of assemblies and the proper operation of overhead cranes and other material handling equipment. * Provides guidance and direction to the hourly personnel assigned to the department/shift, including but not limited to providing personnel training. * Adheres to required MIL specifications. * All other duties as assigned. Preferred Qualifications: * GMAW-P - 2209, 625, 316 * GMAW-P - 100S, 70S * GTAW - 2209, 625, 316, 82 * GTAW - 100S, 70S * GMAW-P - CuNi 67 * GTAW - NiCu-7 67 * Small Dia Pipe - 2209, 625, 316 * Socket Weld - Stainless Education/Experience: High School/Trade School diploma. Must have at least three (3) years of relevant Fabrication experience. Basic computer skills required. Must be able to read blueprints. Must be able to use welding, plate cutting, and grinding tools Must be able to work with minimal supervision. Properly trained to operate cranes safely Must have manual dexterity, accuracy, and attention to detail. Must have knowledge of metal properties and other material. Must have mathematical skills and analytical abilities. Job Type: Full-time Pay: $30.00 - $37.34 per hour Benefits: * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Paid time off * Vision insurance Location: * Florence, NJ 08518 (Preferred) Work Location: In person

Seeking a 1st Shift Fabricator responsible for operating a variety of machines and tools to produce precision parts and assemblies. They may also fabricate and modify parts to make or repair equipment. Experience in sheet metal layout, bend allowances, brake, and shear are required. The ideal candidate will have a team driven attitude, outstanding work ethic, and the ability to work with little or no supervision while maintaining quality of work. As the Fabricator your responsibilities will be: Fabricate from blueprints and drawings Weld, fabricate, and repair machinery in plant as needed. Repair equipment as required in the plant. Install fabricated parts in plant as needed Maintain a clean and safe work area. Work in a manner that promotes safety. Help team reach all KPI goals. Work in a manner that embraces company core values. This position requires that one be able to fabricate and weld parts as needed. Skill Level: Mastered all required skills for the job positions Solid Stick and Tig Welding skills Be able to set-up and run all cutting, forming, and welding equip. avail. in shop. Must be able to read blueprints Must be able to do layout work Required 1-2 years: Tig Welding Experience Plant Safety: Follows company rules, policies and procedures regarding safety. Food Safety: Follows company and USDA rules, policies and procedures are food safety. Required 1-2 years: Must have Tig Welding Experience Schedule: Tuesday - Saturday, 6:00am-2:30pm

At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a Welder to join our team. This role will be on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday. at our Darrah St location. Responsibilities: Perform Welding Operations: Welding thin, light gauge nickel alloy & stainless steel metal (0.020 - .125in). Maintain Welding Equipment: Ensure welding equipment is in good working condition by conducting regular maintenance and repairs. Report any malfunctions or issues to the supervisor. Setting up a GTAW machine, including hookup to their own shielding gas cylinders Quality Control: Inspect welded joints and structures to ensure they meet quality standards and specifications. Ability to perform certain quality inspections on their own work through use of measuring tools, specifically calipers. Follow Safety Procedures: Adhere to safety protocols and guidelines to prevent accidents and injuries. Use personal protective equipment (PPE) and follow proper safety procedures during welding operations. Collaborate with Team: Work closely with engineers, fabricators, and other team members to complete projects efficiently and accurately. Communicate effectively to ensure tasks are completed on time and to specifications. Hands-on work: Roll-forming sheet metal. Comprehension of drawings: Reading, reasoning, and fabricating from blue prints, shop drawings, and standard work procedures. Requirements: Welding Experience: Minimum of 1 year of experience in welding operations, preferably in a manufacturing or industrial setting. Experience with various welding processes with sheet metal or comparable materials. Technical Skills: Proficient in reading and interpreting engineering drawings, blueprints, and welding symbols. Strong understanding of metallurgy and welding principles. Certifications: Possess relevant welding certifications such as AWS (American Welding Society) certification or equivalent. Additional certifications in specific welding techniques or materials may be preferred. Attention to Detail: Ability to work with precision and attention to detail to produce high-quality welds and assemblies. Familiarity with quality control techniques and inspection procedures is essential. Safety Awareness: Knowledge of safety protocols and procedures related to welding operations. Demonstrated commitment to maintaining a safe working environment for oneself and others. Teamwork and Communication: Excellent teamwork and communication skills to collaborate effectively with colleagues and convey information accurately. Physical Stamina: Ability to stand for extended periods, lift heavy materials, and work in various positions and environments. Good physical stamina and dexterity are required for welding tasks. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:00AM-4:30PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Entry Level, Level 1 or Level 2, responsible for TIG/GTAW welding formed sheet metal and cast metal components. This position provides welded metal components which are used to support and fabricate our entire line of products including CleanMount, Vertica, Mobile Stations, and Suite-Stations. Join a team and company with endless innovative visions in a rapidly growing, leading industry! JOB DESCRIPTION: Operate a TIG welding machine to join metal together based on provided engineering print. Fit, tack, and weld metal which include various sizes and shapes from either the press brake, laser cutter, or cast parts. Welding includes components with both square and curved surfaces. Maintain and ensure quality and aesthetic standards for custom, made to order HMI systems. REQUIREMENTS: Prior experience TIG welding thin gauge stainless steel, mild steel, and aluminum a must (typically 14-gauge 304 stainless steel and 14-guage CRS). Experience reading engineering prints and welding symbols a must. Able to use and read various measuring devices such as calipers and protractors. Knowledge of the different types of metal used at STRONGARM (stainless steel, CRS, and aluminum) Knowledge of sheet metal gauges. Prior knowledge and ability to weld all typical types of joints (including butt joints, lap joints, corner joints, tree joints, and edge joints) Able to stand, bend, lift, and/or walk for 2+ hours at a time. RESPONSIBILITIES: Join metal together using a TIG welding machine including both square and curved surfaces. Perform measurements/inspection to ensure conformance to work orders and engineering print specifications such as flatness, parallelism, and dimensional tolerances. Fill non-conforming materials reports for incoming materials that are out of spec or defective. Ensure quality and aesthetic standards are maintained. Clock in and out of work order travelers using the VISUAL bar code system. Follow the daily production schedule. Perform within the parameters of STRONGARM's policies and procedures. BENEFITS CRAFTED FOR YOU: Competitive compensation based on experience and certification PTO (including sick and personal days) 401K, Health insurance, vision, dental STRONGARM swag Biyearly bonuses & yearly raises based on performance reviews STRONGARM Designs is looking for high-energy, mechanically inclined individuals with a positive attitude and willingness to learn. We at STRONGARM are committed to continuous improvement and seek driven candidates who wish to grow and develop professionally.

Job DescriptionDescription Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive and professional appearance Serve the customer's needs through prompt, thorough and professional service Understand all weld procedures used by RD&S and perform visual quality checks throughout the installation of the system Complete daily/weekly work logs Travel as required and stay out of town on a job up to 10 days, occasionally longer. Weld Carbon Steel and Stainless-Steel refrigeration pipe per RD&S WPS B31.5 standards and Structural D1.1. Cost for WTTI to issue weld certification will be paid for by RD&S. Time to complete certifications will be on employee. This must be completed prior to or within 90 days of employment. Read and understand drawings associated with the installation of an industrial refrigeration system and efficiently install sections of system as directed. Attend all company sponsored events. Attend all required company meetings, construction meetings, and monthly safety meetings. Supply personal hand tools and welding shield as required for this position. Complete the OSHA 10 online course prior to start date. This online training course will be paid for by RD&S. Skills Knowledge and ExpertiseRequired Skills/Abilities: Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Ability to get a TWIC card to work at facilities operated under Dept of Homeland Security Must be able to get a clean DOT physical. Welding trucks fall under DOT regulations Education, Certifications, and Experience: OSHA-10 required. Completion of a formal apprenticeship OR successful completion of an in-company, training program preferred. Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 15 pounds at a time. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials.

Temp Now Hiring: Flux Core Welders Long Term Project Wages: $28.00 Per Hour $150.00 Per Diem Experience: 5+ years' work experience welding. Must have current experience with flux core welding. Must have current experience with ceramic tape backing. Essential Functions: Knowledge and proficiency of heavy shipyard construction welding in all positions. Welding process includes: - FCAW - Flux Core Arc Welding Knowledge, understanding and demonstration of interpreting approved Welding Procedure Specifications. Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation. Welder must proficiently demonstrate welding ability through performance and testing as determined by project. Performs other related duties as required and assigned. - Must successfully pass 1st class skill test - 2G & 3G Ceramic Backed Test - Must Successfully pass a background check and drug test - Must be willing to work any shift and overtime if required. To Apply: Submit an up-to-date resume for review.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Available at Quakertown, PA 18951 USA Apply Now Sterner Hydraulics, owned and operated by DD Hurst/ PowerPro Equipment, is looking for a proficient Welder to contribute their experience or knowledge of hydraulic cylinder repair to our Quakertown, PA location! The ideal candidate will have a strong background in welding of all metals and repair of hydraulic cylinders. The successful candidate will be able to troubleshoot problems quickly and efficiently, and have the ability to read and interpret schematics Why Choose PowerPro? Job Type: Full-time, M-F Pay rate: starting base at $24/hour (negotiable based on experience) Benefits: * 401(k) + company matching * Health insurance + HSA + company contribution * Dental insurance * Vision insurance * Short/Long-Term disability insurance * Employee discount * Flexible schedule * Paid holidays, vacation time, and sick time accrual. Qualifications: * Strong mechanical & technical aptitude * Equipment operation experience required * Welding experience, minimum of 5 years required * Hydraulic cylinder knowledge, minimum of 3 years preferred * Organized and detail-oriented, ability to set priorities and meet deadlines * Must be able to lift up to 70 pounds and work in all kinds of weather Experience: * High School Diploma required * Demonstrated on-the-job experience Position Responsibilities: Welding Components of Hydraulic Cylinders - Essential skill for this position * Proficient or mastery level welding skills in MIG, FLUX CORE, STICK, and TIG of all metals * Uses welding techniques to join base plates, cross tubes, port blocks, and rod ends to cylinder tubes and rods * Welds attachments and components as specified by drawings * Capable of fabricating fixtures for complex assemblies when necessary * Knowledge and experience with precision tools/applications as used with hydraulic cylinder fabrication and assembly * Knowledge and experience in welding to meet tolerance specifications for hydraulic cylinders Hydraulic Cylinder Disassembly and Assembly - As needed: Assists as a secondary responsibility. * Inspecting and evaluating hydraulic cylinders, pumps, and hydraulic components * Measuring and evaluating tolerances based upon required specifications * Providing recommendations for repair and remanufacturing * Disassembling cylinders, remanufacturing worn components * Hone hydraulic barrels * Replacing worn or defective parts, seals, components * Reassemble hydraulic cylinders and components with accuracy and precision * Follow specifications for torquing and assembly requirements * Test for operation * Determine need for adjustments or repairs Quality Control * Adhere to quality assurance procedures and processes * Interpret geometric dimensions and tolerances * Maintain specifications by observing, including operations * Taking accurate measurements * Demonstrates excellence in quality of work * Observe all OSHA safety practices

Shop Welder | $25-$26/hr | Temp-to-Hire | Media, PA We're looking for a skilled Shop Welder to join a stable and supportive manufacturing team in Media, PA. This is a full-time, temp-to-hire position with consistent hours and long-term potential. 📍 Schedule: Monday-Friday, 7:00 AM - 3:30 PM 💵 Pay: $25-$26 per hour (based on experience) 📌 Type: On-site | Temp-to-Hire What You'll Do Perform MIG and TIG welding on a variety of metal components Read and interpret blueprints and technical drawings Inspect welds for accuracy, strength, and quality Safely operate shop equipment and maintain a clean work environment What We're Looking For Proven MIG and TIG welding experience Ability to pass a hands-on welding test during the interview process Strong attention to detail and commitment to quality workmanship Reliability and a strong work ethic Physical Requirements Ability to stand for extended periods during shifts Capability to lift up to 50 pounds as needed Comfortable working with welding equipment, tools, and protective gear Ability to work in a shop environment with exposure to heat, noise, and metal materials Why Join Us? This role offers steady work, a supportive environment, and the opportunity to transition to a permanent position with a growing company. Apply today to be considered for this opportunity! Equal Employment Opportunity (EEO) Statement We are an Equal Opportunity Employer and value diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. IND123

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met Knowledge and proficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by Hanwha Philly Shipyard and classification society Welding process includes: FCAW - Flux Core Arc Welding SMAC - Shielded Metal Arc Welding SAW - Submerged Arc Welding EGW - Electro Gas Welding Automated Welding Processes Stainless Steel Fillet Welding Padding and preparing weld joints per WPS Carbon Arc Gouging Note: Not inclusive, shall be determined by vessel specification and classification rules Knowledge, understanding and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification Welder must be able to work in a team environment Welder shall perform internal quality checks of own work performance to assure quality standards are achieved daily Welder shall maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and classification society Perform other related duties as required and assigned COMPETENCIES Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards Flexible cooperation with team members Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather) Ability to orient, train and instruct lesser skilled welders SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. *Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE High School Diploma or GED 3+ years' work experience welding, (flux core and ceramic preferred) Welding robotics and programming a plus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Job DescriptionJob Summary: Welder:Play a vital role in our metal fabrication process. Your primary responsibility will be to perform MIG welding on various metal components. Your work will contribute directly to the production of high-quality products that meet our clients' expectations. Attention to detail, precision, and adherence to safety protocols are crucial in maintaining the exceptional standards set by the company. Responsibilities: Welder: Perform MIG welding on carbon steel, stainless steel, and aluminum components, adhering to blueprints, engineering specifications, and verbal instructions. Set up and operate welding equipment accurately, ensuring precision and efficiency in all welding tasks. Inspect welds for quality, making necessary adjustments to meet Company's high standards. Work collaboratively with team members to meet production deadlines and maintain workflow. Adhere strictly to safety protocols to ensure a safe working environment. Maintain and perform regular cleaning and upkeep of welding equipment to ensure optimal performance. Requirements: Welder: Preferred minimum of 3 years of experience in Welding within a manufacturing or metal fabrication environment. Proficiency in working with carbon steel, stainless steel, and aluminum. Strong understanding of MIG welding techniques and the ability to operate and troubleshoot welding equipment. Ability to read and interpret blueprints, specifications, and verbal instructions for precise welding operations. High attention to detail and ability to produce consistent, high-quality welds. Positive attitude, strong work ethic, and flexibility to adapt to changing needs in a dynamic environment. Ability to work both independently and as part of a team to achieve production goals. Welding certifications (e.g., AWS) are preferred but not required. Robotic Welding experience is an ADDED advantage! Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Heritage Fence Company is looking for an Welder Fabricator to join our growing team! This role is a great opportunity for a detail-orientated individual with experience in the construction industry. We are celebrating 53 years in the Fencing industry and are focused on customer satisfaction, quality craftsmanship and employee engagement and retention. We pride ourselves on being a “We” Company that takes the safety of our employees very seriously. We service the Residential, Commercial, and Industrial markets in eastern PA, MD, DE, VA, NJ, NY with a focus on all types of Fencing (Wood, PVC, Aluminum, Chain Link, Steel, Temporary, etc) Railings, Wooden & Steel Guide Rails, Dumpster Enclosures, Anti-Climb, Temporary Pedestrian Barriers, Jersey Barriers (PVC & Concrete), Gate Operators, Access Control and much more! Responsibilities: Willingness to Travel (Occasional travel due to job location) Work in both our shop and on job sites as a welder, mechanic or by assisting others Manage fab shop equipment and metal fabrication Consistently evaluate processes, recommend changes when appropriate Meet with decision makers to discuss project options and take measurements Daily communication with Operations to ensure smooth installation of projects Work independently when required Help manage operating expenses by allocating materials for minimal waste, facilitating clean transitions from one job to the next Plan, implement and manage tasks in accordance with priorities and adhere to relevant safety regulations and requirements Peacefully resolve any problems or issues that may arise Requirements and Skills: Minimum 5-7 years' experience Reliable transportation to/from the office Valid Driver's License US Citizenship or Working Visa Ability to lift 80lbs Ability to pass new hire and random drug test Ability to work full time M - F, 7am - 5pm (flex schedule available) & occasional Saturday mornings Detail oriented and experienced in Stick, TIG & MIG welding Ability to read and interpret Blueprints and layout materials Good math skills Strong interpersonal and communication skills Critical-thinking and problem-solving skills Strong organizational skills, time management skills, multi-tasking skills Positive attitude Quality and safety focused Benefits Offered: Competitive Wages DOE Company Vehicles (6) Paid Holidays Paid Vacation Days Medical, Dental & Vision Insurance Uniforms 401K/Profit Sharing Employee Appreciation/Outings such as Phillies games, golfing, bowling, BBQ's, Gift Cards Call ************ or visit us at 3890 Skippack Pike, Skippack, PA 19474 Resumes can be emailed to *********************

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR sCkIDpzNuh

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications . · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys . · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal is looking for a Welder to join our team. This role will be on a 4 day, 10 hour work week of 6:00AM-4:30PM Monday-Thursday. at our Darrah St location. Responsibilities: Perform Welding Operations: Welding thin, light gauge nickel alloy & stainless steel metal (0.020 - .125in). Maintain Welding Equipment: Ensure welding equipment is in good working condition by conducting regular maintenance and repairs. Report any malfunctions or issues to the supervisor. Setting up a GTAW machine, including hookup to their own shielding gas cylinders Quality Control: Inspect welded joints and structures to ensure they meet quality standards and specifications. Ability to perform certain quality inspections on their own work through use of measuring tools, specifically calipers. Follow Safety Procedures: Adhere to safety protocols and guidelines to prevent accidents and injuries. Use personal protective equipment (PPE) and follow proper safety procedures during welding operations. Collaborate with Team: Work closely with engineers, fabricators, and other team members to complete projects efficiently and accurately. Communicate effectively to ensure tasks are completed on time and to specifications. Hands-on work: Roll-forming sheet metal. Comprehension of drawings: Reading, reasoning, and fabricating from blue prints, shop drawings, and standard work procedures. Requirements: Welding Experience: Minimum of 1 year of experience in welding operations, preferably in a manufacturing or industrial setting. Experience with various welding processes with sheet metal or comparable materials. Technical Skills: Proficient in reading and interpreting engineering drawings, blueprints, and welding symbols. Strong understanding of metallurgy and welding principles. Certifications: Possess relevant welding certifications such as AWS (American Welding Society) certification or equivalent. Additional certifications in specific welding techniques or materials may be preferred. Attention to Detail: Ability to work with precision and attention to detail to produce high-quality welds and assemblies. Familiarity with quality control techniques and inspection procedures is essential. Safety Awareness: Knowledge of safety protocols and procedures related to welding operations. Demonstrated commitment to maintaining a safe working environment for oneself and others. Teamwork and Communication: Excellent teamwork and communication skills to collaborate effectively with colleagues and convey information accurately. Physical Stamina: Ability to stand for extended periods, lift heavy materials, and work in various positions and environments. Good physical stamina and dexterity are required for welding tasks. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:00AM-4:30PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 / (251)385-0491 *Please send us a text if we don't answer* Job Description POSITION SUMMARY: Plan, layout, weld, install, test and repair all types of pipe and similar tubular products in accordance with plans, specifications, codes, and industry standards. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of its customers, the essential duties and responsibilities may be different than described. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations, and policies while performing duties. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. -Complete welds to the specified standards using appropriate equipment and materials. -Install and verify operation of high-pressure steel pipes and fittings. -Repair and replace any damaged pipe; fabricate and install metal fittings; install supports, valves, and other control equipment; bolt, clamp, or weld parts to secure in position for welding. -Use appropriate hand and power tools to properly measure, cut, assemble, weld, and install all types of pipe and/or similar tubular products. -Test installed piping systems and install other related items in accordance with the applicable plans and specifications. -Set up equipment and welding parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Troubleshoot equipment. -Produce high-quality welds, including water-tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. -Successfully pass in a 6G (6" pipe coupon) Stainless Steel, CUNI, & Aluminum - TIG -Successfully pass in a 6G (6" weld coupon) Carbon Steel - root and cap REQUIREMENTS: Education/Experience: High school diploma or GED equivalence plus three to five years' pipe welding experience desired. An equivalent combination of education and experience may be considered. Requires working knowledge of equipment, work processes, and techniques used in measuring fitting and welding steel. Requires x-ray pipe welding experience with the ability to weld pipe in all positions and mirror welding. Requires knowledge of welding symbols, ship terminology, and Occupational Safety and Health Administration (OSHA), and American Bureau of Shipbuilding (ABS) standards. Must pass SMAW 6G Pipe Test to become ABS Certified. Skills: Ability to read and comprehend written, verbal, or diagram forms or plans. Ability to apply common sense understanding to carry out written and verbal instructions. Ability to read and understand blueprints. Ability to effectively present information and respond to questions from supervisors and employees. Knowledge of safe operation and use of hand and power tools. Ability to add, subtract, multiply, and divide into all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety-conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. The specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Entry Level, Level 1 or Level 2, responsible for TIG/GTAW welding formed sheet metal and cast metal components. This position provides welded metal components which are used to support and fabricate our entire line of products including CleanMount, Vertica, Mobile Stations, and Suite-Stations. Join a team and company with endless innovative visions in a rapidly growing, leading industry! JOB DESCRIPTION: Operate a TIG welding machine to join metal together based on provided engineering print. Fit, tack, and weld metal which include various sizes and shapes from either the press brake, laser cutter, or cast parts. Welding includes components with both square and curved surfaces. Maintain and ensure quality and aesthetic standards for custom, made to order HMI systems. REQUIREMENTS: Prior experience TIG welding thin gauge stainless steel, mild steel, and aluminum a must (typically 14-gauge 304 stainless steel and 14-guage CRS). Experience reading engineering prints and welding symbols a must. Able to use and read various measuring devices such as calipers and protractors. Knowledge of the different types of metal used at STRONGARM (stainless steel, CRS, and aluminum) Knowledge of sheet metal gauges. Prior knowledge and ability to weld all typical types of joints (including butt joints, lap joints, corner joints, tree joints, and edge joints) Able to stand, bend, lift, and/or walk for 2+ hours at a time. RESPONSIBILITIES: Join metal together using a TIG welding machine including both square and curved surfaces. Perform measurements/inspection to ensure conformance to work orders and engineering print specifications such as flatness, parallelism, and dimensional tolerances. Fill non-conforming materials reports for incoming materials that are out of spec or defective. Ensure quality and aesthetic standards are maintained. Clock in and out of work order travelers using the VISUAL bar code system. Follow the daily production schedule. Perform within the parameters of STRONGARM's policies and procedures. BENEFITS CRAFTED FOR YOU: Competitive compensation based on experience and certification PTO (including sick and personal days) 401K, Health insurance, vision, dental STRONGARM swag Biyearly bonuses & yearly raises based on performance reviews STRONGARM Designs is looking for high-energy, mechanically inclined individuals with a positive attitude and willingness to learn. We at STRONGARM are committed to continuous improvement and seek driven candidates who wish to grow and develop professionally.

Job DescriptionDescription Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive and professional appearance Serve the customer's needs through prompt, thorough and professional service Understand all weld procedures used by RD&S and perform visual quality checks throughout the installation of the system Complete daily/weekly work logs Travel as required and stay out of town on a job up to 10 days, occasionally longer. Weld Carbon Steel and Stainless-Steel refrigeration pipe per RD&S WPS B31.5 standards and Structural D1.1. Cost for WTTI to issue weld certification will be paid for by RD&S. Time to complete certifications will be on employee. This must be completed prior to or within 90 days of employment. Read and understand drawings associated with the installation of an industrial refrigeration system and efficiently install sections of system as directed. Attend all company sponsored events. Attend all required company meetings, construction meetings, and monthly safety meetings. Supply personal hand tools and welding shield as required for this position. Complete the OSHA 10 online course prior to start date. This online training course will be paid for by RD&S. Skills, Knowledge and ExpertiseRequired Skills/Abilities: Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models, and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Ability to get a TWIC card to work at facilities operated under Dept of Homeland Security Must be able to get a clean DOT physical. Welding trucks fall under DOT regulations Education, Certifications, and Experience: OSHA-10 required. Completion of a formal apprenticeship OR successful completion of an in-company, training program preferred. Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 15 pounds at a time. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. Benefits Healthcare (medical, dental, vision, prescription drugs) Health Reimbursement Arrangement (shared cost deductible) Flexible Spending Account Dependent Care Account Accident Insurance Life Insurance AD&D Insurance Short/Long Term Disability Employer matched 401(k) savings plan Paid vacation time Paid sick time Generous paid holiday schedule