Welder fitter jobs in Keller, TX - 326 jobs

Temp To Full-Time Key Responsibilities Weld Preparation: Cut, shape, and prep structural steel components so they are ready for welding and assembly. Structural Assembly: Lay out, fit, and position beams, columns, brackets, and other steel parts according to drawings or instructions. Ensure everything is square, level, and aligned using basic tools like tape measures, squares, and levels. Tack Welding: Use proper weld settings and techniques to tack pieces into place before final welds are completed. Grinding & Finishing: Grind, deburr, and clean structural steel parts to meet company quality standards. Quality Inspection: Check measurements, alignment, and overall fit-up throughout the build to ensure accuracy and safe installation. Documentation: Fill out simple forms or notes related to inspections, part numbers, or completed work as required. Tool & Equipment Care: Inspect and maintain tools, welding machines, and equipment to ensure they are safe and ready for use. Safety & Housekeeping: Follow all safety rules, use proper PPE, and help keep the work area clean and organized. Required Skills & Qualifications Ability to read and understand basic structural drawings, layouts, and instructions. Experience working with structural steel and basic welding/tack welding. Knowledge of proper fit-up, alignment, and measurement practices. Comfortable using hand tools, grinders, and measuring tools. Strong attention to detail and pride in producing quality, accurate work. Physically able to lift, carry, stand, and bend for long periods (up to 50-75 lbs). Able to work in a busy shop environment with exposure to heat, cold, dust, noise, and heavy materials. Must be able to read and write to complete basic paperwork and follow written instructions. SHIFTS AVAILABLE: 1st shift Monday-Thurs 5a-3:30p / 5am-1:30p some SAT OT. 2nd shift Monday-Thurs 4p-2:30a / Fri 2p-10:30p / Saturday 1-9p PAY: 1st shift - 21.00 2nd shift - 21.00 + 4.00 differential to 25.00

Maintenance/Skilled Craftsman Additional Information: Show/Hide Days: 260 Pay Grade: MT07 * Please check the Salary Schedule for current rates and stipend eligibility. (Scroll down after clicking this link) Qualifications: Education/Certification: * High School Diploma or equivalent * Valid Texas driver's license with good driving record * AWS Certified Welder (CW) certification or Steel Structures Welding Certification Experience: * Minimum five (5) years of experience in welding, and metal fabrication * Please see attached for more information. Attachment(s): * Job Description - Certified Welder

Full-time Description Experienced Commercial Mechanical Welder/Pipefitter - TIG Stainless Steel Fabrication & Hydronic Piping Greater DFW Area - $32-$38/hr | Weekly Pay | Full Benefits | Company Vehicle Are you a TIG-certified stainless-steel experienced mechanical pipefitter/welder who can fabricate/install high-end commercial kitchen systems and new-construction hydronic piping? RLP Mechanical is growing and has year-round work across the DFW metroplex. We're a respected MEP contractor looking for craftsmen who deliver precision, safety, and pride in their welds. Why Work With RLP Mechanical Top Pay: $32-$38/hr based on experience + weekly pay Full Benefits: Medical, dental, vision, life, STD/LTD 401(k) Match: You put in 6%, we put in 4% Company Truck + Gas Card Up to 20 Days PTO + Paid Holidays No Seasonal Layoffs - Steady commercial work all year What You'll Work On Mechanical TIG fabrication / welding of stainless steel for commercial kitchens, food-service equipment, and mechanical rooms Installing and fabricating hydronic piping systems (chilled water, heating hot water, condenser water) Welding, brazing, grooving, threading, soldering, and system layout Reading and interpreting blueprints, isometrics, and piping diagrams Installing pumps, heat exchangers, expansion tanks, valves, and supports Testing, flushing, and commissioning hydronic systems Leading small crews on installs (if experienced) What You Bring 4-6+ years of mechanical pipefitting experience TIG welding certification (stainless steel experience required) Experience working with stainless steel, copper, PVC, HDPE Experience with commercial kitchen installs or hydronic piping Ability to weld to code-quality standards (food service & mechanical) Foreman/lead experience is a plus - or the desire to grow into leadership Valid driver's license and ability to clear background/drug screening Who We Are RLP Mechanical provides high-quality commercial HVAC, hydronics, plumbing, and refrigeration services across the DFW area. We're built on craftsmanship, safety, and respect. Our teams stay because they get steady work, strong support, and a company that values professional tradespeople. Ready to Build Your Career With Us? If you're a skilled commercial stainless-steel TIG welder or hydronic pipefitter who takes pride in clean work and reliable installs, we want to talk. Apply today and join a company that respects your craft.

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Essential Duties: * Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts. * Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station. * Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds. * Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications. * Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions. * Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays. * Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts. * Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face. * Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results. * Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols. * Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature. * Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing. * Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially. * Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size. * When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications. * Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area. * Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process. * Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity. Position Requirements: * High School diploma or GED equivalent preferred * Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals. * Proficiency in reading complex prints and specifications. * Must know how to properly use a weld gauge. * Read and write. Physical Requirement: * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

SOLV Energy is an engineering, procurement, construction (EPC) and solar services provider for utility solar, high voltage substation and energy storage markets across North America. A certified Welder in the solar industry is responsible for performing welding operations to assemble and fabricate solar panels, structures, and components. They work with various materials such as steel, aluminum, and stainless steel to ensure the proper construction and installation of solar systems. : *This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned Position Responsibilities and Duties: Reading and interpreting blueprints, drawings, and specifications to determine welding requirements. Setting up and operating welding equipment, including MIG, TIG, and arc welding machines. Preparing materials for welding by cleaning, cutting, and shaping them as needed. Welding components together using the appropriate welding techniques and methods. Inspecting welded joints and structures to ensure they meet quality standards and specifications. Repairing and modifying existing solar panels and structures as necessary. Collaborating with engineers and other team members to resolve welding-related issues and improve processes. Following safety procedures and wearing protective equipment to prevent accidents and injuries. Maintaining welding equipment and tools in good working condition. Keeping accurate records of work performed, materials used, and time spent on projects. Minimum Skills or Experience Requirements: Strong understanding of construction, welding techniques and practices Excellent attention to detail Manual dexterity Ability to work effectively in a team environment. Certification in welding and relevant experience in the solar industry Solar panel installation experience preferred but can be taught SOLV Energy Is an Equal Opportunity Employer At SOLV Energy we celebrate the power of our differences. We are committed to building diverse, equitable, and inclusive workplaces that improve our communities. SOLV Energy prohibits discrimination and harassment of any kind against an employee or applicant based on race, color, age, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, or ethnicity, mental or physical disability, veteran status, parental status, or any other characteristic protected by law. Benefits: Employees (and their families) are eligible for medical, dental, vision, basic life and disability insurance. Employees can enroll in our company's 401(k) plan and are provided vacation, sick and holiday pay. Compensation Range: $20.00 - $35.00 Pay Rate Type: Hourly SOLV Energy does not accept unsolicited candidate introductions, referrals or resumes from third-party recruiters or staffing agencies. We require all third-party recruiters to communicate exclusively with our internal talent acquisition team. SOLV Energy will not pay a placement fee to any third-party recruiter or agency that has not coordinated their recruiting activity with the appropriate member of our internal talent acquisition team. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Any unsolicited candidate introductions, referrals or resumes sent by third-party recruiters to SOLV Energy or directly to any of our employees, or received through our website or career portal, will be considered property of SOLV Energy and will not be eligible for a placement fee. In the event a third-party recruiter submits a resume or refers a candidate without a previously signed vendor agreement, SOLV Energy explicitly reserves the right to pursue and hire the candidate(s) without financial liability to such third-party recruiter. If you're interested in a meaningful career with a brighter future, join the SOLV Energy Team.

ISCO is seeking a highly skilled and experienced Pipe Fitter/Welder (Combo-Welder) to join our team in Cedar Hill, TX. This is a fantastic opportunity to contribute to a dynamic and challenging work environment while leveraging your expertise in pipe welding techniques for the natural gas industry. ISCO is a family owned and operated company born and raised in Louisville, KY that is focused on our team members' growth. ISCO Industries is an end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader, and is also ISO 9001:2015 certified. ISCO offers a standard benefits package of medical/dental/vision, and 401k with company match! Competitive salary and benefits package, opportunity for professional growth and development, challenging and rewarding work environment, and supportive and collaborative team culture. Standard 40 hours per week (Mon-Thurs 4-10's) with opportunities for overtime. All tools and PPE are provided. *WILL BE TESTED AT TIME OF INTERVIEW FOR QUALITY AND EFFICIENCY* Starting Pay Range: $26 - $32 (Depending on Experience) Responsibilities: Execute complex pipe welding projects according to industry standards and specifications. Maintain a strong safety record by adhering to all safety protocols and regulations. Utilize GMAW & SMAW downhill welding effectively and efficiently. Utilize an oxygen acetylene torch effectively and efficiently Read and interpret blueprints and schematics to plan and execute welding tasks. Inspect completed welds for quality and adherence to specifications. Use of a weld positioner/turntable Inspect material for defects, and check material specifications to record traceability requirements. Provide guidance and support to junior welders and apprentices. Contribute to the overall efficiency and productivity of the welding team. Qualifications: Minimum of 3-5 years of experience in pipe fitting & welding. Proven experience in both GMAW and SMAW welding. Proficiency in a 12” Butt & Branch weld test is preferred. Proficiency in reading and interpreting blueprints and schematics. Strong understanding of welding codes and standards. Ability to work independently and as part of a team. Excellent problem-solving and decision-making skills. Valid certifications (e.g., API 1104, and ASME) are a plus. Agree to pre-employment and random drug screen and/or alcohol test as required by DOT

Landmark is a leading provider of engineering, construction, and asset management services for storage solutions in the water, wastewater, power, and industrial markets. We operate throughout North American and have built our reputation on delivering the most challenging projects with a high degree of efficiency and precision. Challenging the norm and innovating better methods is core to our approach. The position of Welder performs tasks related to the steel phase of construction safely, efficiently, and to Landmark's quality standards. Essential Functions: * SMAW flat, vertical, horizontal, and overhead positions * GTAW * MCAW * GMAW * FCAW gas shielded and self-shielded wire flat, vertical, horizontal, and overhead positions * Experience welding FCAW on ceramic backer. * Experience reading WPS * Experience welding and passing X Rays on 1 " thick plate (AWWA D100 D107 D1.1) codes * Arc gouge flat, vertical, horizontal, and overhead positions * Oxy/acetylene or oxy/propylene torch work * Understanding or reading of drawings and/or blueprints * Working at heights up to 200' * A strong safety knowledge/safety culture Non-Essential Functions: * Layout, erect, dismantle, and load tank jig, scaffolding, and other miscellaneous steel structures * Layout, secure, brace, and pin steel plate, including cone, vertical, shell, ring beam, access tube, and other associated steel tank structures and appurtenances * Rigging knowledge * Signaling of cranes and other heavy construction equipment * Safe operation of construction tools and equipment * Understanding of various piping and valve installations * Installation of various hardware, vents, hatches, and specialty items * Grinding, sanding, and polishing * Operation of hydraulic tank hoisting equipment * Fall protection methods * Understanding of OSHA Part 1926 Qualifications: * To perform this job successfully, the incumbent must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications * 2 to 5 years of similar experience of progressive responsibility * Must be able to travel frequently and work at heights * Experience with OSHA and other regulatory requirements and industry standards * Experience with discipline-specific industry standards (API, ASME, AWWA, NACE, ACI, etc.) Licenses, Certifications, Registrations * Valid Driver License * CPR and First Aid Certification Preferred EOE, including disability/vets #SPO If you have a question, or need an accommodation as part of the employment process, please contact Human Resources at ************************ Landmark is an Equal Opportunity Employer View Company Information To see other positions, click here.

Job Description A full-time welder fabricator for Denton yard is capable to repair equipment trailers and equipment must be able to Weld stick and wire feed looking for an experienced welder that can read blueprints and good fabricating skills. ESSENTIAL JOB FUNCTIONS: Welds on Equipment materials according to standards set for structured mild steel Maintains safe working practices at all times. REQUIRED QUALIFICATION: Excellent oral/written communication and phone skills Strong interpersonal and customer service Ability to work independently as well as field operations Must be organized & detail oriented Strong work ethic If applicable, “light duty” may be available depending on the work location and project schedule Education/Experience: This position requires a minimum of a high school degree and additional training in welding and 1-2 years of field construction and/or utility industry experience. PHYSICAL REQUIREMENTS: The physical, emotional and environmental demands of this position take on the characteristics typical of the construction environment. This position will frequently perform duties where standing, sitting, walking, lifting more than 50 pounds, reaching overhead, climbing, kneeling, extreme heat, extreme cold, wet/humid conditions, dust, odors and moving machinery are part of daily routines. The position has deadlines under pressure as well as irregular activity schedules. The workday includes a minimum of 8.0 hours per day with breaks taken according to the daily project schedule. This position has measurable performance criteria, works under stress and with a majority of time spent indoors. EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement

Seeking experienced Structural & Pipe Welders for a growing steel manufacturing facility in the Arlington Structural Welders: $21-$22/hr Pipe Welders: $24-$25/hr Schedule: Monday-Friday, 50-60 hrs/week (OT required) Occasional Saturdays (3-4 times/year) Job Description We are seeking highly skilled Pipe and Structural Welders proficient in MIG, TIG, Fluxcore, or Stick welding. Candidates must be able to pass a 6G pipe test and Destructive/Non-Destructive testing. Essential Skills & Responsibilities Weld pipe and structural steel (1" to 48") to ASME, API, and 100% X-Ray code standards Perform welds in various positions on code materials Proficient in reading and interpreting blueprints, including layout and fit-up Cut and prep materials using flame/plasma torches, saws, grinders, and measuring tools Operate shop equipment: Iron worker Overhead crane Rigging gear Pipe threading machine Tube bending machine Pneumatic hand tools Assemble and fabricate components with minimal supervision Promote a safety-first, productive work environment Must be a team player with a positive attitude and willingness to improve processes Requirements Must pass 6G Pipe Welding Test Minimum 2-3 years of welding experience or completion of welding school High school diploma or GED Certified to weld on pipe or plate Own welding hood and steel toe boots required (not provided) Comfortable working in hot environments (fans only - no A/C) Must be willing to work mandatory overtime (50-60 hours/week) Physical Demands Frequently bend, squat, climb, stoop, twist, and reach Lift up to 25 lbs frequently, and up to 50 lbs occasionally Apply Today!

at TPG Pressure Inc Thompson Pipe Group is currently looking for a 2nd Shift Welder Ill. Pay Range: $22.00 - $24.50 per hour depending on experience Schedule: Monday - Friday 3:30pm-2:00am regularly requires weekend work. What We Offer: Top-tier Medical, Dental, and Vision Benefits Benefits eligibility 1st of the month following 30 days of employment Safety Shirts after 90 Day Introductory period Safety prescription eye wear program Safety work wear subsidy after 90 day introductory period Bonus Programs Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Fun Events Training and Development Employee Discounts Career Opportunity! Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at ************************* This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions Must pass 3G weld test with the back gouge and back weld with FCAW process Must be able to weld within criteria. ASME standards. Must be able to maintain a 95% acceptance rate with ASME codes. This position frequently requires standing, sitting, kneeling, stooping, crawling, climbing, use of hands to handle objects, operate controls, and tools. No limits of a range of motion. Able to carry out instructions furnished in written, oral, and verbal form. Must be experienced in flux-core welding, FCAW/ GMAW and SAW is a plus. Must be familiar with standard concepts, practices, and procedures within the welding field. Utilize the flux-core welding process, cutting torch, hand-held grinders, and whatever other tools necessary to complete these repairs. Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment. Organizational Support: Follows all policies and procedures; Supports organization's goals and values Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively. Self-Management Attendance/Dependability/Flexibility There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) An improperly illuminated or awkward and confining workspace Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding) Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch. The employee is repeatedly required to climb vertical ladders. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc. Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. We are located at: 1004 MacArthur Blvd. Grand Prairie, TX

Purpose: As a Fitter you will be responsible for assembling and fitting miscellaneous steel components according to technical drawings and blueprints, ensuring that they meet design specifications and quality standards. Primary Responsibilities: Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes. Weld steel members. Move steel members into positions, manually or with hoists or cranes. Position, align, fit, and track weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. Determine appropriate method and sequence of tasks in order to fabricate items in the most efficient way possible. Coaching and training of lower-level fitters to help them advance in their skill sets. Assisting foreman and managers maintain consistent workflow and production on shop floor to ensure timely completion of projects. Ensure all peers are following all safety policies. Conduct thorough quality checks to identify and rectify defects, ensuring that the finished product meets quality standards. Required Knowledge, Skill, Abilities, and Competencies: Fitter 1: Basic Metalworking Skills: Proficiency in using hand tools, power tools, and basic metalworking machinery. Basic understanding of fabrication processes such as cutting, grinding, and drilling. Blueprint Reading: Ability to interpret simple technical drawings and blueprints. Welding Proficiency: Advanced skills in welding, including the ability to perform intricate welding tasks using various techniques. Safety Awareness: Adherence to safety protocols and guidelines to maintain a secure working environment. Team Collaboration: Willingness to work as part of a team and follow instructions from experienced fitters and supervisors. Attention to Detail: Developing a keen eye for detail to ensure accuracy in the fabrication process. Physical Endurance: Ability to handle physically demanding tasks and work in various positions. Learning Attitude: Openness to learning and acquiring new skills on the job. Fitter II: Advanced Metalworking Skills: Proficiency in using a broader range of fabrication tools, machinery, and equipment. Capability to perform more complex fabrication processes and tasks. Blueprint Interpretation: Advanced ability to read and interpret complex technical drawings and blueprints. Welding Proficiency: Advanced skills in welding, including the ability to perform intricate welding tasks using various techniques. Quality Control: Strong focus on quality assurance, with the ability to identify and rectify defects or deviations from specifications. Problem-Solving: Developing advanced problem-solving skills to troubleshoot issues that may arise during the fabrication process. Project Coordination: Ability to coordinate and manage specific aspects of fabrication projects, working more independently. Leadership Potential: Demonstrating potential for leadership roles and the ability to assist in guiding and mentoring junior fitters. Fitter III: Expert Metalworking Skills: Mastery in using a wide range of fabrication tools, machinery, and equipment. Proficient in complex fabrication processes. Blueprint Mastery: Expertise in reading and interpreting complex technical drawings and blueprints. Welding Expertise: Advanced skills in welding, with the ability to perform intricate welding tasks using various techniques. Quality Assurance: Strong focus on quality assurance, overseeing the entire fabrication process and ensuring the highest standards are met. Leadership and Supervision: Strong leadership skills to oversee and manage a team of fitters, providing guidance, training, and coordinating work schedules. Project Management: Ability to manage and prioritize multiple tasks, ensuring deadlines are met and resources are utilized efficiently. Communication Skills: Effective communication skills to collaborate with other team members, engineers, and project managers. Innovation and Continuous Improvement: Proactive in suggesting and implementing improvements to enhance efficiency and quality in the fabrication process. Training and Mentorship: Willingness and ability to train and mentor junior fitters, sharing knowledge and expertise. Education, Experience, and Certifications: High school diploma or equivalent; additional technical or vocational training is a plus. Two years experience in steel fabrication or welding. Upon offer or promotion, candidate must pass a drug and/or alcohol test. Disclaimer This job description is not to be construed as an exhaustive list of duties, responsibilities, or requirements. Employees may be required to perform other related job duties.

The Welder is responsible for welding in the garage. This position is responsible for understanding, supporting, and assisting the operational teams assigned with client specific tasks, standards, specification, and thorough understanding of all department operating policies and procedures. Our Core Values: TRAITS Trust, Respect, Accountability, Integrity, Teamwork, and Safety. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Roles and Responsibilities: Welds components in flat, vertical, or overhead positions Works with specialized equipment including welding and other necessary tools Works safely around backhoes, excavators, trenchers, and dump trucks Cleans and prepares construction sites to eliminate possible hazards Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers Examines workpieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications Clamps, holds, tack-welds, heat-bends, grinds, or bolts component parts to obtain required configurations and positions for welding Selects and installs torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals Determines required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material Analyzes engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations Marks or tags material with proper job number, piece marks, and other identifying marks as required Prepares all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter Preheats work pieces using torches to then guide and directs flames or electrodes on or across work pieces to connect pipe Detects faulty operation of equipment or defective materials and notifies supervisors Cleans or degreases parts, using wire brushes, and portable grinders Success Factors: Ability to perform heavy manual labor for extended periods, often under adverse climatic conditions.  Ability to lift up to 80 lbs multiple times during a work shift Ability to climb, dig, work in tight spaces, on uneven surfaces, walking, stooping, and kneeling Ability to understand and follow specific oral and written instructions Ability to work well independently and as a part of a team with co-workers Ability to pass motor vehicle, criminal background check, and comply with drug-free workplace policy English usage sufficient to keep records, place orders, and prepare simple narrative reports  Willingness and ability to learn additional skills Experience and Education: High school diploma or equivalent desired Previous Welding Experience Bilingual English/Spanish is a plus Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required within two weeks of employment. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

🔥 Now Hiring: Combo Welders | DFW Metroplex Pay: Competitive, based on experience Texas Trades, LLC. is seeking highly skilled Combo Welders for upcoming commercial projects. If you're certified, motivated, and ready to test and go, we want to hear from you. Why Texas Trades? We connect top-tier welders with respected contractors, offer steady project pipelines, and treat skilled tradespeople with the respect they've earned. 📞 Text us "Combo Welder" and your name at ************ or apply online at ******************

Job Title: MIG/TIG Welder - Aluminum Job Type: Full-Time (Monday-Friday, 6:00 AM - 2:30 PM) Pay Rate: $24/hour and up, DOE Surestaff is immediately hiring experienced MIG/TIG Welders for a large, well-established client in Arlington, Texas. Surestaff is a leading staffing agency specializing in light industrial and manufacturing roles, connecting skilled talent with top employers across the Midwest and Southeast. We are committed to speed-to-hire, employee advocacy, and long-term career success. We are seeking an experienced AWS Certified TIG Welder with direct aerospace experience to join our dynamic team. The ideal candidate will be proficient in TIG welding according to AWS codes D1.2 (Aluminum), D1.6 (Stainless Steel), and D17.1 (Aerospace Fusion Welding). This role is crucial in ensuring our products meet the highest industry standards and contribute to the success of cutting-edge aerospace projects. Key Responsibilities Execute high-quality TIG welding operations on aerospace components in accordance with AWS D1.2, D1.6, and D17.1 standards Work extensively with aluminum, stainless steel, and other aerospace-grade materials, ensuring structural integrity and compliance with engineering specifications. Accurately read and interpret complex blueprints, welding symbols, and engineering drawings to fabricate components precisely. Conduct thorough inspections of welds and finished products to ensure compliance with aerospace industry requirements and company quality standards. Partner with engineers and project managers to troubleshoot welding issues, optimize processes, and contribute to project development. Utilize and maintain our brand-new Lincoln welding equipment and fume extraction systems, ensuring optimal performance and adherence to safety standards. Keep detailed records of welding procedures, inspection results, and any discrepancies in compliance with our quality management system. Adhere strictly to all safety protocols, including OSHA regulations and company policies, to maintain a safe and clean work environment. Stay updated on the latest TIG welding technologies, AWS code revisions, and industry best practices to enhance skills and contribute to the company's growth. Qualifications Experience: Minimum of 2 years of direct TIG welding experience in the aerospace industry. Proficiency in TIG welding techniques for aluminum and stainless steel, with a strong understanding of welding codes and standards. Familiarity with aerospace industry standards such as AS9100 and NADCAP requirements. Exceptional precision in TIG welding tasks, with a commitment to producing defect-free components. Ability to identify and resolve welding challenges efficiently and effectively. Strong communication skills and the ability to work collaboratively within a multidisciplinary team. Benefits Competitive pay starting at $24/hour and up (DOE) Temp-to-hire opportunity Electronic weekly pay About SurestaffAt Surestaff, we help individuals unlock their career potential through meaningful employment. With an estimated annual revenue of $295 million, Surestaff has been recognized by Staffing Industry Analysts (SIA) as one of the largest staffing firms in the U.S. We focus on matching talent with opportunities that align with skills, goals, and lifestyle.Surestaff is an equal opportunity employer and complies with all applicable state and local laws regarding sick time, paid time off, and retirement savings programs.Notice Regarding the Use of Artificial Intelligence in Employment DecisionsIn accordance with state mandates, Surestaff provides notice that artificial intelligence (AI) tools may be used during various stages of the employment process, including recruitment, screening, hiring, and evaluations. These tools support consistent and efficient decision-making and do not replace human judgment.

About Us: Kenney Industries is a growing Job Shop manufacturer specializing in high-quality metal fabrication and custom projects. We're looking for a skilled Welder to join our team and contribute to delivering precise, durable work in a safe and collaborative environment. Job Summary: We are seeking a skilled and reliable Welder to fabricate, assemble, and repair metal components using MIG, TIG, and other welding techniques. The ideal candidate will have strong attention to detail, a commitment to safety, and the ability to read blueprints to produce high-quality welds that meet project specifications. Key Responsibilities: Read and interpret blueprints, sketches, and technical drawings to determine layout and welding requirements. Set up and operate welding equipment (MIG, TIG, stick/arc, etc.) to join, fabricate, or repair metal parts. Prepare materials by cutting, grinding, cleaning, and assembling components. Perform welds in various positions (flat, vertical, overhead) on materials like steel, stainless steel, and aluminum. Inspect completed welds for strength, quality, and defects; grind or finish as needed. Maintain welding equipment and tools, performing routine maintenance. Follow all safety protocols, including wearing protective gear and ensuring a safe work area. Collaborate with team members on projects and meet deadlines efficiently. Requirements and Qualifications: Proven experience as a Welder (2+ years preferred), with proficiency in MIG and TIG welding. Ability to pass a welding test (e.g., MIG/TIG on steel or stainless). High school diploma or equivalent; welding certification (e.g., AWS Certified Welder) is a plus. Strong knowledge of welding safety standards and procedures. Excellent hand-eye coordination, physical stamina, and ability to lift heavy materials. Basic math skills for measurements and blueprint reading. Reliable, detail-oriented, and able to work independently or in a team. What We Offer: Competitive pay and benefits (health insurance, 401k, paid time off, etc.). Opportunities for overtime and skill development. A supportive team environment with modern equipment.

Job DescriptionSalary: Fabricator/Welder will use various techniques to cut, shape, and assemble raw steel into pre-defined structures according to blueprints, must be proficient in interpreting shop Drawings for Construction of all types of structures. Utilizing tools like cutting torches, welding machines, and other metalworking equipment to create the necessary components and assemble them into the final structure, requiring strong mechanical skills, above average knowledge of welding techniques. Ability to work alone and with team members. Ability to stand for long periods of time. Lift or carry at least 50lbs Knowledge of AISC quality standards, Safety certifications, Forklift certifications a Plus but not required.

Job Posting Start Date 01-09-2026 Job Posting End Date Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Structural Welder located in Dallas, Texas. Reporting to the Structural Welding Supervisor, the Structural Welder will be responsible for welding structural steel (c-channels) to fabricate the framing for sheet metal enclosure buildings using welding equipment and techniques. This position uses the FCAW process. 1st shift: Monday - Friday, 6:00 AM - 2:30 PM What a typical day looks like: Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. Lay out, position, align, and secure parts prior to assembly Weld structural steel (c-channels) in flat, vertical, or overhead positions using welding techniques and equipment Clamp, hold, or tack weld parts to obtain required configurations and positions for welding Determine required equipment and welding techniques, applying knowledge of metallurgy, geometry, and welding techniques Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Complete all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent Completion of a formal apprenticeship OR 2+ years' experience in dual shield welding process Certification required: AWS D1.1 FCAW (Flux Core Arc Welding) Physical Requirements: Must be able to pass respirator fit test Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor Must be able to weld components that are vertical, flat, or overhead Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range Must be able to lift up to 35 pounds at times Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Full-time Description Who we are: CDI custom curb adapters is the nation's fastest curb manufacturer in the HVAC industry. We are a nation-wide company with manufacturing facilities located in the suburbs of Minneapolis, Dallas, Seattle, Charlotte, and Phoenix. Today CDI leads the curb adapter industry with the fastest lead times and the most curbs manufactured annually. We've gained this success by continuing to focus on CDI's three core values: FAST - EASY - FUN. FAST: Respond quickly - EASY: Don't complicate things - FUN: Be a great day maker Position Summary: The primary responsibility is welding of various metal types to create components used to assemble the finished product. Each task must be completed with safety, accuracy & timeliness in the welding department. Principal Duties and Responsibilities: Safe operation of MIG welding machine and various other tools used to complete project Create quality and accurate welds according to blueprints. Inspect welds for accuracy. Prepare product to be welded by grinding, drilling, milling, tapping and cutting steel parts. Change welding wire as needed. Change shielding gas tanks, as needed Follow and enforce all CDI safety rules and regulations Ensure equipment is properly set-up & used in a safe manner & that all safety devices are in use. Operate fork lift, if required and certified. Performs inspections on product before, during, and after the build following CDI's standards. Monitor functionality of equipment and tools and request maintenance when required. Perform basic maintenance and repair as required. Effectively communicate with supervisors & other production staff to coordinate work schedules Other duties as assigned. Full-Time CDI employees are offered the following benefits: 401(k) with up to 4% employer match Health, Dental, and Vision insurance Life Insurance Short-Term and Long-Term Disability Insurance Paid Holidays and Vacation Profit Sharing Opportunities Departmental cross training and many promotional opportunities! Requirements Knowledge, Skills, and Abilities: High school diploma or equivalent qualification. Must be at least 18 years old. Outstanding attention to detail, ability to multitask, strong time management skills. Excellent knowledge of welding machinery, electrical equipment, and hand tools. Ability to use tape measures and other measuring tools. Knowledge or willingness to cross-train in other production departments. Must be willing to undergo a pre-employment drug test. Must be able to effectively read, write and speak the English language. Ability to stand or walk for extended amounts of time. Ability to frequently bend, twist, grip, squat and lift. Ability to lift 50 pounds frequently & lift 70 pounds occasionally. Combination of trade school and/or 2 years practical experience EEO/Affirmative Action Policy CDI is an equal opportunity employer and prohibits harassment of any kind. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

We are looking for a WELDER to join our Waxahachie plant. As a welder with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work and become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees. Why apply? * Competitive pay * Medical and prescription drug coverage * Dental and vision coverage * Health savings and flexible spending account * 401(k) with company match * Life insurance and disability coverage * Paid vacation * Paid holidays * Growth & Development opportunities * Employee Discounts * Mental Health through our Employee Assistance Program * Wellness benefits including low-cost gym memberships About the Role: Responsibilities: * Welding and Fabrication: Operate welding equipment to assemble and weld cages, ensuring they meet required specifications and quality standards. * Reading Blueprints: Interpret and work from engineering drawings and blueprints to accurately assemble cages according to design specifications. * Material Handling: Select and prepare materials for welding, including cutting, fitting, and positioning components * Welding Techniques: Utilize various welding techniques, such as MIG, TIG, or stick welding, to join metal components securely. * Quality Control: Inspect finished products to ensure they meet quality and safety standards, making any necessary adjustments or repairs. * Safety Compliance: Adhere to all safety protocols and guidelines to prevent workplace accidents and injuries * Equipment Maintenance: Maintain and perform routine checks on welding equipment to ensure it functions properly. * Collaboration: Work in coordination with other team members to achieve production goals and timelines. * Record Keeping: Maintain records of completed work and any necessary documentation for quality control and production tracking. * Continuous Improvement: Suggest and implement process improvements to enhance productivity and product quality. * Any other miscellaneous tasks assigned by management at any given time and in any given area About You We Require: * Great work ethic and impeccable attendance. * Able to read and understand work orders and complex instructions. * Familiarity with hand tools and power tools. * Ability to work outdoors or in open air environment. * Preferred - Experience working in a manufacturing environment. * Preferred - Experience operating a forklift, especially an industrial forklift. * Must be able to lift and move objects up to 50 pounds frequently. Over 50 pounds, a forklift or crane will be used. Must be able to push or pull cart with 80 pounds of force. Must be able to climb stairs and ladders. Must be able to step up 20 inches. About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? * The process is simple. Click on the "apply" button to get started.