Welder fitter jobs in Midland, TX - 20 jobs

Key Responsibilities Assist in performing welding tasks under supervision using GMAW and FCAW processes. Prepare materials, set up welding equipment, and clean weld joints. Learn to read and interpret blueprints and technical drawings. Operate crane, forklift and band saws. Support fabrication, assembly, and repair of metal components. Inspect welds for quality and accuracy with guidance from senior welders. Maintain tools and work area in a clean, safe, and organized condition. Follow all safety protocols, including the use of PPE and adherence to NOV and OSHA standards. Participate in ongoing training and skill development opportunities. Qualifications High school diploma or equivalent (GED) preferred Basic understanding of welding techniques and tools (school or on-the-job training preferred). Demonstrated commitment to safety and quality workmanship. Strong willingness to learn and take direction from experienced welders. Ability to lift and move up to 50lb materials safely. Reliable, punctual, and team-oriented attitude. Completion of a welding trade program or certification course (AWS or equivalent). Hands-on welding experience (internship, school project, or entry-level role). Familiarity with basic fabrication tools and measurement equipment. EDUCATION & EXPERIENCE QUALIFICATIONS Previous experience in the industry preferred, but not required

Job Title: Welder I Department: Midland Job Zone: Hourly Reports to: Operations Manager FLSA: Non Exempt Hours per week: 40 hours Overtime & Weekends required: As needed POSITION SUMMARY:We don't just weld metal - we build solutions and strong teams. We're looking for a motivated Welder who can handle a variety of welding tasks, follow engineering drawings, and deliver high-quality workmanship. Beyond technical skill, we want someone who is a team player, goes the extra mile, and is excited about growing with a company that values your contributions.The Welder is responsible for performing high-quality weld preparation, welding, and finishing operations to manufacture and repair components for our equipment. The ideal candidate is not only technically skilled but also a team player who takes initiative, contributes to a positive work environment, and is eager to grow with the company. This role requires the ability to read and follow engineering drawings, specifications, and other forms of instruction accurately. ESSENTIAL JOB FUNCTIONS:Welding & Fabrication Perform various welding processes (SMAW, GMAW, FCAW, GTAW-depending on qualifications) to fabricate, repair, and assemble components used in company equipment. Prepare weld joints by grinding, beveling, cleaning, and fitting parts to ensure proper alignment and weld quality. Execute welding tasks in accordance with engineering drawings, blueprints, welding procedure specifications (WPS), and job traveler requirements. Use fabrication tools such as torches, plasma cutters, grinders, and measuring devices to support accurate and efficient fabrication. Quality & Technical Execution Interpret engineering drawings, weld symbols, and specifications to ensure parts are fabricated to exact standards. Inspect completed welds for defects; perform repairs or rework as needed to meet quality requirements. Work with Quality Control to support fit-ups, dimensional checks, non-destructive examinations (NDE), and final inspections. Follow all documented procedures to ensure consistency, accuracy, and compliance with company and industry standards. Teamwork & Communication Collaborate with fabrication leads, engineers, and fellow welders to resolve issues, clarify instructions, and ensure smooth workflow. Communicate proactively when encountering missing information, quality concerns, or safety risks. Support teammates by sharing knowledge, helping with material handling, or assisting in related tasks when needed. Safety & Work Environment Follow all company safety policies, PPE requirements, and safe work practices while operating welding equipment and shop tools. Maintain a clean, organized workspace to promote safety, efficiency, and high-quality workmanship. Report hazards, unsafe conditions, or equipment issues promptly to supervision. Production Support Meet production timelines while maintaining a high standard of quality and minimizing rework. Assist in staging materials, organizing parts, and maintaining accurate documentation of work completed. Participate in continuous improvement efforts to enhance welding processes, safety, and team performance. Other Duties Perform other job-related tasks as assigned to support the needs of the team and the broader operations. SKILL REQUIREMENTS: High School diploma or GED required. Up to 1 year of Flux Core and MIG welding experience; Hard Wire welding experience is a plus. Strong mechanical aptitude and attention to detail. Self-motivated, reliable, and able to work under moderate supervision. Demonstrated ability to collaborate with a team and contribute positively to company culture. Strong written and oral communication skills. Desire to grow and develop professionally within the company. Customer service-oriented mindset and professional demeanor. QUALIFICATIONS: Minimum of 1 year of Manufacturing Warehouse experience. Commitment to a safety culture where safety is the first consideration before starting any task. Good computer skills, including JDE, Microsoft Office including Excel and Word. Good understanding of Warehouse and Inventory Control processes/procedures. Solid analytical and planning skills. · Proficient in problem analysis and resolution. Ten years of hands-on accounting managerial experience. Successful completion of a pre-employment drug screen, motor vehicle and background check. Professionalism, flexibility, critical thought process and creativity Ability to learn and work under pressure and meet deadlines. Ability to manage multiple tasks and prioritize workflow. Regular and reliable attendance Follow all safety policies and procedures. WORK ENVIRONMENT: Must use personal protective equipment including safety glasses, hearing protection, and steel-toe shoes. Frequent sitting, walking, reaching, climbing, stooping, kneeling, crouching, or crawling. Ability to lift/move up to 20 lbs frequently and up to 50 lbs occasionally. Vision requirements include close vision, color vision, and ability to adjust focus. Work performed in a manufacturing environment with exposure to heat, noise, and other standard conditions. PHYSICAL DEMANDS: Sitting, climbing, or standing as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching, pushing, pulling, or lifting as required within limits set. SAFETY AND POLICY PRACTICES:Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. AFFIRMATIVE ACTION:All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, notional origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law.

We are seeking a skilled Welder to join our dynamic team. You do not need to be certified, but need to be able to pass a test on the job site. It is a basic plate welding job. If you have the right experience and skills and confident to take this job please apply fast. Start date of the project - ASAP Duration of the project- Long term can go upto more than 6 months Testing-- Basic Plate Weld Test Join us in creating exceptional products through your welding expertise! Job Types: Full-time, Contract

Your Job The jobsite located in Stanton, TX has an opening for a Rig Welder . Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries. OPD is part of the larger Koch Engineered Solutions (KES) organization which provides a variety of capabilities across many industries. Originally incorporated in 1980, OPD has developed a strong reputation for honesty, integrity, and ability to successfully execute projects. OPD has a key advantage in being able to supply construction services as well as engineering/procurement. This enables clients to have a ''one stop shop'' for the overall project, providing increased efficiency and avoiding potential interface problems. OPD's industry experience, flexibility, and personal attention have made us a preferred partner to our customers and our tight knit, highly productive, team atmosphere makes OPD a great place to work. What You Will Do Some core responsibilities for a rig welder include: Must own portable welding rig including PPE. Understand required weld procedure for designated area. Welding pipes, tubes, fittings, and related equipment according to specifications. Operate tools and equipment including: angle grinders, beveling machines, cut-off grinders, hammers, torches, magnetic drills, welding machines, and a Saw-Zall. Possess skilled knowledge of pipe fittings, bolts, valves, etc. as required. Possess skilled knowledge of welding equipment and operations. Must be able to work with minimal supervision. We expect all field employees to: Actively participate in a strong safety culture Recognize safety hazards and risks Participate in onsite safety meetings Follow OPD and client safety policies and procedures Be aware of changing conditions on an active jobsite Be on time to the jobsite each day ready for work Display a positive attitude and be able to work in a team environment Some physical demands of being a rig welder include: Capable of working in outdoor weather and environmental conditions including extreme heat and humidity, extreme cold, and high elevations. Lifting and carrying awkward objects up to 60 lbs Standing for extended periods of time up to 12 hours per day. Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis. Must be able to work on elevated platforms and maintain balance when stepping on narrow platforms such as beams and pipes. Must be able to perform these activities while wearing an approved full-body harness and lanyard. Use hands to handle, control, and feel objects and/or tools. Who You Are (Basic Qualifications) At least 2 years of general welding experience. Must be able to pass code welding test: ASME Section IX 6G pipe test (SMAW & GTAW) and AWS D1.1 plate test for structural welds (SMAW). Must demonstrate the ability to produce welds that are 100% x-ray quality and visually acceptable per the construction code i.e. ASME B 31.3. Must own rig and all required equipment. Other Job Requirements: Travel is a must with extended periods away from home in remote areas at times. Must be willing and able to work shifts up to 12 hours per day and 7 days per week. Must be able to meet basic physical demands with or without accommodations. Must be willing and able to attend mandatory safety meetings. What Will Put You Ahead 5 years of experience as a welder Previous experience in a gas plant construction environment Previous experience being a leader for safety Strong interpersonal skills At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here. Who We Are As a Koch Engineered Solutions company, Optimized Process Designs (OPD) provides clients with detailed engineering packages in all disciplines, single-point procurement for all equipment and materials, fabrication and direct-hired construction services throughout the United States. We leverage in-house capabilities and provide services with faster speed to market to help deliver increased cost savings while minimizing risk. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please visit the following website for additional information: ******************************************

Equix Energy Services is an energy and utilities contractor that provides high-quality pipeline and facility construction services. The Equix team is built on pride in the workmanship and abilities of our crews. Our Core group of in-house welders have extensive knowledge and background in pipeline and fabrication welding. We have a current opening for a Welder. At Equix, we support our customers and stakeholders and constantly strive to exceed expectations with all of our services, which include: Pipeline Construction, Gas Distribution, Horizontal Directional Drilling, Facility Construction and Fabrication, and Trenching services. Responsibilities: Handling projects from organizing workflow to creating schedules and all logistics with implementing the project Leading the crews and day-to-day activities with clear communication skills Knowledge of safe operation of construction equipment and work vehicles used in underground installation of natural gas distribution piping, power, and telecom infrastructure Lead daily safety briefings Take responsibility for quality of work, meeting production goals and keeping records of production Proper care of assigned equipment and reporting any accidents/incidents Adhere to and promote company, OSHA, & DOT Safety Standards and Policies Leading the invoicing process for billing projects on time Supporting crews by grooming and developing team members for growth and advancement Ability to use a level and figure elevations etc. Other duties as assigned Ability to travel to different states and different sites Requirements: High school diploma or equivalent; welding certificate or training preferred 5+ years of welding experience preferred High level of proficiency in metal arc welding Ability to read blueprints and schematics Steel-toed boots and appropriate safety gear Ability to stand, crouch, and lift objects throughout your shift Physical stamina and manual dexterity Equix offers: Multiple medical plan options Weekly pay Wellness program Dental and vision plans FSA and HSA options 401k savings plan with employer match Financial protection products Short and long-term disability, life, accident, critical illness Legal Shield and ID theft plans Employer-paid life insurance Paid Time Off and paid holidays Employee assistance program Employee referral program Pet Insurance Education Assistance Program Health Advocacy Program Candidates must pass pre-employment screenings that may include a drug test, background check, reference checks, and driver's license check with an acceptable driving record. Equix is an Equal Opportunity Employer, D.O.T. drug testing participant, and e-Verify participant. We encourage minorities, women, people with disabilities, and veterans to apply.

Equix Energy Services is an energy and utilities contractor that provides high-quality pipeline and facility construction services. The Equix team is built on pride in the workmanship and abilities of our crews. Our Core group of in-house welders have extensive knowledge and background in pipeline and fabrication welding. We have a current opening for a Welder. At Equix, we support our customers and stakeholders and constantly strive to exceed expectations with all of our services, which include: Pipeline Construction, Gas Distribution, Horizontal Directional Drilling, Facility Construction and Fabrication, and Trenching services. Responsibilities: Handling projects from organizing workflow to creating schedules and all logistics with implementing the project Leading the crews and day-to-day activities with clear communication skills Knowledge of safe operation of construction equipment and work vehicles used in underground installation of natural gas distribution piping, power, and telecom infrastructure Lead daily safety briefings Take responsibility for quality of work, meeting production goals and keeping records of production Proper care of assigned equipment and reporting any accidents/incidents Adhere to and promote company, OSHA, & DOT Safety Standards and Policies Leading the invoicing process for billing projects on time Supporting crews by grooming and developing team members for growth and advancement Ability to use a level and figure elevations etc. Other duties as assigned Ability to travel to different states and different sites Requirements: High school diploma or equivalent; welding certificate or training preferred 5+ years of welding experience preferred High level of proficiency in metal arc welding Ability to read blueprints and schematics Steel-toed boots and appropriate safety gear Ability to stand, crouch, and lift objects throughout your shift Physical stamina and manual dexterity Equix offers: Multiple medical plan options Weekly pay Wellness program Dental and vision plans FSA and HSA options 401k savings plan with employer match Financial protection products Short and long-term disability, life, accident, critical illness Legal Shield and ID theft plans Employer-paid life insurance Paid Time Off and paid holidays Employee assistance program Employee referral program Pet Insurance Education Assistance Program Health Advocacy Program Candidates must pass pre-employment screenings that may include a drug test, background check, reference checks, and driver's license check with an acceptable driving record. Equix is an Equal Opportunity Employer, D.O.T. drug testing participant, and e-Verify participant. We encourage minorities, women, people with disabilities, and veterans to apply.

←Back to all jobs at FORCE PRESSURE CONTROL LLC Welder FORCE PRESSURE CONTROL LLC is an EEO Employer - M/F/Disability/Protected Veteran Status OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Odessa facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Please visit our careers page to see more job opportunities.

We are seeking a skilled Structural Welder-Fitter to join our team. The ideal candidate will be responsible for fabricating and assembling metal structures through the use of welding techniques. **Qualifications:** - Proven experience as a Structural Welder-Fitter or similar role - Proficiency in reading and interpreting blueprints - Knowledge of different welding techniques and equipment - Strong attention to detail and precision - Ability to work independently and as part of a team - Certification in welding is a plus **Responsibilities:** - Read and interpret technical drawings to determine the layout of metal components - Use welding equipment and tools to weld and assemble metal parts - Inspect and test welded structures to ensure they meet quality and safety standards - Troubleshoot and resolve issues with welding equipment - Collaborate with team members to achieve project goals - Follow safety guidelines and procedures to maintain a safe work environment Excellent attendance is required for this position. You must show up with appropriate tools of your trade. Subject to drug screen, physical and E-Verify background check. This position is outside in the weather, involves standing for 10 hr shifts, climbing, bending, kneeling and working at heights.

MUST be located in the Odessa/Midland NOW area to apply (Independent Contractor) Apply in person or on Indeed, bring hood and gloves for welding test Must own portable welding rig, hood, gloves, torch, etc. including PPE CONTRACT LABOR Fabricate oilfield switch racks, and buildings Read drawings, take measurements, read isometrics, and install efficiently Lifting, Climbing Ladders, Painting, and working with insulation 3-5 Years Stick Welding Experience 3 Years Flux Core Experience Familiar with a torch, grinder, and chop saw Must be able to read, write & communicate in English Must be able to work with minimal supervision Actively participate in a strong safety culture Recognize safety hazards and risks Participate in onsite safety meetings Lifting and carrying awkward objects up to 60 lbs Standing for extended periods of time up to 12 hours per day. Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis. Some Saturday's Work lights required 3-5 years of Stick Welding 2-5 years of Flux Core Experience 2-5 Years of Manufacturing Experience Compensation details: 54-55 Hourly Wage PI58261dc01af1-31181-39540214

We are seeking a non-code welder to join our production team. This role is ideal for candidates who work safely, and contribute to an efficient manufacturing environment. Safety, quality, and teamwork are essential to success in this position. Key Responsibilities: Perform welding tasks on various metal components according to welding codes and blueprints (e.g., AWS, ASME, or other industry-specific standards). Efficiently and accurately operates welding equipment and related tools necessary for manufacturing and production. Required to read prints and drawings accurately and follow all work instructions. Examines work pieces for defects and measure work piece with straightedge or template to ensure conformance with specifications. Dismantles metal assemblies or cuts scrap metal, using thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment. Connects hoses from torch to tanks of oxygen and fuel gas and turns valves to release mixture. Climbs ladders or works on scaffolds. Reports any discrepancies and safety related issues to shop foreman. Must inspect and repair all defects and discontinuities. Make repairs on vessels or tanks that have not passed inspection or need repair. Operates forklift, man lift, and scissor lift. Ensure compliance with safety regulations, including the proper use of personal protective equipment (PPE), welding helmets, gloves, and safety gear. Qualifications & Skills Must be able to pass a 6G welding test. Able to read print layout and build vessel. High school diploma or equivalent preferred. Strong attention to detail and ability to identify defects and non-compliance issues. Experience as a pipe welder preferred. Working knowledge of AWS, API, ANSI, and ASME codes and standards needed. What We Offer: Competitive salary based on experience Health, dental, and vision insurance 401(k) retirement plan Paid time off and holidays Professional development and training opportunities Semi-annual bonuses

TEAM UP WITH US! The Field M & E Welder III is responsible for welding metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, plant equipment, motors, and generators. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Weld metal parts together using both gas welding or brazing and any combination of arc welding processes, and perform related tasks such as thermal cutting and grinding. * Repair broken or cracked parts, fill holes, and increase size of metal parts. * Position and clamp together components of fabricated metal products preparatory to welding. * Perform general assembly of engine to driven equipment. * Apply a general understanding of mechanical concepts, pipe layout and threading. * Differentiate between thread types and sizes, and utilize basic torque techniques. * Look for ways to improve and promote quality, apply feedback to improve performance, and monitor own work to ensure quality. * Observe safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly. * Demonstrate reliable attendance, punctuality, and time management. * Follow instructions, respond to management direction, take responsibility for own actions, and keep commitments. * Occasionally work long or unusual hours of work when necessary to reach goals. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); and five to eight years related experience and/or training. * Ability to read, write, and comprehend simple instructions, short correspondence, and memos, which may be in written, verbal, or diagram form. * Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Basic mathematical skills, to include the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Ability to deal with problems involving several concrete variables in standardized situations. * Ability to pass Worksteps evaluation. * Valid driver's license and clean driving record. * Must be 21 or older. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to wet and/or humid conditions; moving mechanical parts and high, precarious places. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA

**TEAM UP WITH US!** The Field M & E Welder III is responsible for welding metal components together with brazing and a variety of arc and gas welding equipment to fabricate or repair products such as machine parts, plant equipment, motors, and generators. **DO YOU HAVE WHAT IT TAKES?** **WHAT YOU'LL DO:** + Weld metal parts together using both gas welding or brazing and any combination of arc welding processes, and perform related tasks such as thermal cutting and grinding. + Repair broken or cracked parts, fill holes, and increase size of metal parts. + Position and clamp together components of fabricated metal products preparatory to welding. + Perform general assembly of engine to driven equipment. + Apply a general understanding of mechanical concepts, pipe layout and threading. + Differentiate between thread types and sizes, and utilize basic torque techniques. + Look for ways to improve and promote quality, apply feedback to improve performance, and monitor own work to ensure quality. + Observe safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly. + Demonstrate reliable attendance, punctuality, and time management. + Follow instructions, respond to management direction, take responsibility for own actions, and keep commitments. + Occasionally work long or unusual hours of work when necessary to reach goals. **WHAT YOU'LL NEED:** + High school diploma or general education degree (GED); and five to eight years related experience and/or training. + Ability to read, write, and comprehend simple instructions, short correspondence, and memos, which may be in written, verbal, or diagram form. + Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. + Basic mathematical skills, to include the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. + Ability to deal with problems involving several concrete variables in standardized situations. + Ability to pass Worksteps evaluation. + Valid driver's license and clean driving record. + Must be 21 or older. **WHY WORK WITH US?** + We like to take care of business and have fun doing it! + We offer health, dental, vision, life, and more as a comprehensive benefits package. + Don't you want to work with awesome people? **IMPORTANT INFORMATION:** While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to wet and/or humid conditions; moving mechanical parts and high, precarious places. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

GD Energy Products - New Name, Same Legacy The company you have known as Gardner Denver High Pressure Solutions has a new name - GD Energy Products. Now for more than 160 years, we have made it our business to lead the industry with unmatched products and services; and I can promise that while our identity may change, deep down, who we are as a company never will. GD Energy Products is looking for a Welder to work in Odessa, TX. When joining GD Energy Products, you will be eligible for many of our competitive benefits, including: vacation, 401K matching, paid holidays, sick days, full medical/dental/vision benefits, short/long term disability, maternity/paternity leave and many more! Job Summary: The Welder will weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment. Supervisory Responsibilities: None. Duties/Responsibilities: Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. Repairs and fabricates various items and equipment using cutting, burning, and welding techniques and equipment. Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. Prepares, assembles, and tacks weld parts and surfaces to be welded. Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Performs other related duties as assigned. Required Skills/Abilities: Thorough understanding of machines and tools used in welding including designs, uses, maintenance and repair. Basic understanding of design techniques, principles, and tools necessary for the precise production of technical plans, drawings, models and blueprints. Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics as related to welding assignments. Education and Experience: High school Diploma or Equivalent preferred Minimum 2 years' experience and/or welding certification required. Physical Requirements: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 15 pounds at times. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. GD Energy Products is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, creed, age, sex, sexual orientation, gender identity, pregnancy, national origin, disability or protected veteran status, as well as any other characteristic protected by applicable law, regulation or local ordinance. For more information about your rights under the law, see ***********************************************************************

Richard Construction Inc. (RCI) is currently seeking experienced Industrial Mechanical Welders and Combination Welders. A Combination Welder will weld, fabricate, and assist pipe fitters in installation of varying types of industrial pipe into the projects piping systems. This position will also require assisting fitters, riggers/rigging, and knowledge of process piping. Combination Welders and Mechanical Welders will also weld piping attachments, vessels, furnace shells, tanks, structural steel, or any metal that requires joining by welding processes. RCI has various levels of welder positions based on experience and skills ranked as follows: * Welder Leadman: Certified Welder with 5+ years of experience. Proficient in welding carbon steel, chromes, and stainless steel materials, of various wall thicknesses, with minimal Non-Destructive Examination (NDE) rejections. * Welder I: (Combo Welder) Certified Welder with 3+ years of experience. Welds fabricated cast, rolled, and forged components to assemble structural forms such as tanks, pressure vessels, furnace shells, and the pressure boundary of piping and associated piping attachments. Proficient in welding carbon steel, chromes, and stainless steel materials with various welding processes. * Welder II: Same as Welder I with 95% competency rating or greater and at least 2+ years of experience. * Welder III: AWS D1.1 structural steel Certified. Preferred minimum of 1 year industrial experience. Welds together structural metal components as specified by drawings, work orders, or oral instructions, utilizing knowledge of metallic and non-metallic materials including the specifications of the particular equipment to be used in the process. Interested in learning and qualifying in more stringent welding requirements of pressure boundary for piping, tanks, or vessels. Qualification Highlights: * Must have the ability to weld in 2g, 4g, and 6g conditions (at Welder II position and higher) * Must be able to Stick and TIG weld on pipe (at Welder II position and higher) * Must have current applicable welding certification with RCI or be able to pass a weld test successfully * Must have required welding experience for the welding classification * Must have all required Knowledge, Skills, and Abilities for position - see below * Must be able to meet all physical requirements * Must have all tools listed below upon start date * Must be able to regularly and reliably show up at the assigned job site * Must meet all safety and security requirements at the assigned job site Position Responsibilities: * Selects equipment and plans layouts, assembly, and welding of pipe applying knowledge of geometry, physical properties of metals to be assembled, metals machining, weld shrinkage, and welding techniques * Layout, position, align, cut, assemble, and fit metal components together in various body positions and in various places * Bolts, clamps, and tack welds parts to secure in position for welding * Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or arc gas welding equipment * Weld metal materials to piping systems, supports, or associated equipment using the appropriate welding procedure for the various equipment and metal types involved * Identify all equipment for job and process * Identify all safety risks and requirements Preferred Additional Qualifications: * Current RCI employee * RCI former employee from a Reduction of Force (ROF) * Current RCI Welding Certification * Former experience of working with RCI * Experience working as an Industrial Pipe Fitter * Former experience working in the petrochemical industry Physical Requirements: * Employee will be required to adhere to large amounts of standing, waling, bending, squatting, sitting, and lifting * Will talk and hear to communicate effectively * Will use arms and hands to signal, grab, hold, turn, push and pull various objects, materials, controls or tools * Will be required to lift, carry, and move up to 50 lbs in weight * Will work at slight heights, climb ladders and stairways, and may occasionally work off of platforms using the appropriate fall protection requirements * Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and safety toe work boots * Must be capable of working outdoors in the elements including but not limited to the heat, cold, rain, snow, and wind, while wearing appropriate PPE. Must be able to work for long period of times up to 12 hours a day. Required Tools: * 1 - Metal Tool Box with Lock & Bolt Bag * 1 - Stinger * 1 - TIG Rig (combo welders only) * 1 - Welding Hood * 1 - Chipping Hammer * 1 - Pair of Klein Pliers or equal * 2 - Crescent Wrench 12" and 15" * 1 - 25' Tape * 1 - 32 oz. Ball Peen Hammer * 1 - Torpedo Level * 1 - Combination Square * 1 - Pair of Leathers (overhead welding) * 1 - Safety Toed Boots RCI is dedicated in providing a SAFE and Drug Free environment. RCI is a Equal Opportunity Employer (EEO). Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ***************************** Equal Opportunity Employer, including disabled and veterans. Please select this link to view:

Job Description: Shop Welder Wage/Hour Status: Nonexempt Reports To: Grounds Foreman Pay Grade: 8 Dept./ School: Facilities Days: 247 Primary Purpose: The goal of the shop welder is to ensure timely, accurate and cost-effective completion of jobs and projects as assigned by the ground's foreman. Must maintain all shop tools and equipment, as well as the maintenance of the welding truck, tools and equipment. Maintains district maintenance white fleet. Qualifications: High School diploma or G.E.D. equivalent Have a valid Texas drivers license Special Knowledge/Skills: General knowledge of welding Major Responsibilities and Duties: Able to troubleshoot, diagnose and repair company trucks. Learn to estimate materials, order and obtain material as required, and inform supervisor of needs and requirements to complete each job. Maintain accountability of tools, equipment, and supplies as assigned. Learn to identify and resolve various repair problems to ensure proper job completion. Maintain accurate records for proper completion of work orders (such as labor and material costs). Maintain and demonstrate an attitude of quality service, and teamwork, and good public relations and communications with co-workers, supervisors, and district employees at the various facility sites. Functions within the polices and administrative procedures of the Ector County Independent School District. Be available for emergency call outs on evenings, weekends, and holidays. Learn to read and interpret technical materials and specifications, including but not limited to construction documents, engineering reports and submittal data Ability to communicate with a varied work force both professional and skilled labor Ability to maintain good public relations and communications with co- workers, supervisors, and district officials as part of a team. Performs all other tasks and duties as assigned Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made if necessary While performing the duties of this job, the employee is regularly required to stand, move throughout the room and/or facility communicate verbally and electronically use hands and fingers to handle or feel objects, tools, or controls, reach with hands and arms, stoop, kneel, crouch, and/or crawl, climb, balance, and drive; Occasionally required to sit. Regularly required to lift or exert force of up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust focus. Work Environment: The environmental characteristics described here are representative of those an employee encounters while performing the essential functions of this job: The noise level in the work environment is usually moderate to high; Regularly exposed to such environmental conditions as moving mechanical parts, fumes, airborne particles, risk of electric shock.

Job DescriptionDescription: OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Odessa facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test. The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws. Requirements:

Job Description Equix Energy Services is an energy and utilities contractor that provides high-quality pipeline and facility construction services. The Equix team is built on pride in the workmanship and abilities of our crews. Our Core group of in-house welders have extensive knowledge and background in pipeline and fabrication welding. We have a current opening for a Welder. At Equix, we support our customers and stakeholders and constantly strive to exceed expectations with all of our services, which include: Pipeline Construction, Gas Distribution, Horizontal Directional Drilling, Facility Construction and Fabrication, and Trenching services. Responsibilities: Handling projects from organizing workflow to creating schedules and all logistics with implementing the project Leading the crews and day-to-day activities with clear communication skills Knowledge of safe operation of construction equipment and work vehicles used in underground installation of natural gas distribution piping, power, and telecom infrastructure Lead daily safety briefings Take responsibility for quality of work, meeting production goals and keeping records of production Proper care of assigned equipment and reporting any accidents/incidents Adhere to and promote company, OSHA, & DOT Safety Standards and Policies Leading the invoicing process for billing projects on time Supporting crews by grooming and developing team members for growth and advancement Ability to use a level and figure elevations etc. Other duties as assigned Ability to travel to different states and different sites Requirements: High school diploma or equivalent; welding certificate or training preferred 5+ years of welding experience preferred High level of proficiency in metal arc welding Ability to read blueprints and schematics Steel-toed boots and appropriate safety gear Ability to stand, crouch, and lift objects throughout your shift Physical stamina and manual dexterity Equix offers: Multiple medical plan options Weekly pay Wellness program Dental and vision plans FSA and HSA options 401k savings plan with employer match Financial protection products Short and long-term disability, life, accident, critical illness Legal Shield and ID theft plans Employer-paid life insurance Paid Time Off and paid holidays Employee assistance program Employee referral program Pet Insurance Education Assistance Program Health Advocacy Program Candidates must pass pre-employment screenings that may include a drug test, background check, reference checks, and driver's license check with an acceptable driving record. Equix is an Equal Opportunity Employer, D.O.T. drug testing participant, and e-Verify participant. We encourage minorities, women, people with disabilities, and veterans to apply.

PRIMARY RESPONSIBILITIES , align, and fit components using appropriate machines, tools, and equipment Bolt, clamp, and tack-weld parts to secure proper alignment prior to final welding Set up and weld components using approved welding equipment and procedures Interpret blueprints, drawings, written instructions, and manufacturer specifications to determine hole locations, cuts, bends, and assembly requirements Apply working knowledge of geometry, arithmetic, structural design, heat effects, and material thickness allowances Safely and correctly use hand tools and set up and operate applicable shop machinery Perform arc welding, oxy-acetylene welding, cutting, and brazing on ferrous and non-ferrous metals in accordance with established standards and procedures Complete and maintain required production and quality documentation Perform additional work-related duties as assigned Comply with all NOV company policies, safety standards, and HSE procedures EDUCATION & EXPERIENCE QUALIFICATIONS High School diploma or equivalent, or an equivalent combination of education and experience Minimum of five (5) years of welding experience required Must possess and maintain a valid driver's license JOB REQUIREMENTS Willing and able to work in both field and shop environments. Ability to read, interpret, and work from fabrication and engineering drawings. Must successfully pass a 6GR welding qualification test. Proficient in welding using E7018 SMAW (Stick) electrodes. Must successfully complete a comprehensive fabrication skills assessment, including demonstration of 7018 Stick welding proficiency. Strong understanding of blueprint interpretation, welding specifications, and welding procedures. Knowledge of precision measuring instruments, including but not limited to calipers, inside and outside micrometers, depth gauges, indicators, and scales. Ability to use and read welding and layout measuring devices, including squares, levels, and tape measures. Capable of performing accurate layout work from blueprints. Ability to work overtime as required. Physically capable of climbing up to 120 feet while wearing and using approved fall-protection equipment. COMPETITIVE BENEFITS: (visit usbenefits.nov.com for more information about our benefits offerings) 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. Competitive medical plans that are effective your date of hire. Visit usbenefits.nov.com/cost-for-coverage for more information. FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. All regular full-time employees receive up to 11 paid holidays per year.

OFS Facility Operations | Sub Arc Welder Force Pressure Control is seeking safety-oriented production personnel to work in its Odessa facility. Welding personnel must be able to operate with and without supervision, prepare and initiate jobs, maintain machinery and working production area, and record all data outlined in QAQC protocols. Three years working experience within sub arc work scopes is required as is working experience with alloys and API ring grooves. Working background with valve and other wellhead / surface pressure control equipment is valued. Candidates must be able to successfully pass bend test. The Sub Arc Welder position is a full time, non-exempt position. Overtime in excess of 40 hours per work week will be required. Hourly pay rate commensurate with experience. Applicants have rights under Federal Employment Laws.