Welder jobs in Middletown, OH

Weld Machine Operator---- Responsible for running various welders and other machines efficiently, inspecting parts, and keeping work areas organized and clean. Adequately moves finished parts from work center using pallet jack to appropriate location. Effectively assists in setting up work centers following work instructions and company processes/procedures. Accurately performs and follows all general machine Total Preventive Maintenance (TPM) programs. Assists and provides effective and efficient training to other associates. Efficiently operate welders and other machines at or above the determined rate set by management. Proficiently sets up jobs and checks welders for proper settings (current, squeeze, hold, etc). Carefully inspects parts using calipers, micrometers, gages, force testers, etc., and records results in the appropriate system. Accurately recognizes visual defects on part. Fluent on Plex system keeping entries accurate and true (work center status). Adequately completes rate sheets and submits them in a timely manner. Thoroughly cleans work area by putting all items in appropriate locations. Successfully completes Pay for Skills and Training Within Industry (TWI) programs. Based on company needs a flexible work schedule and/or overtime is needed. ***Tools and Equipment Used: Pallet Jack Part Lifter Plex Calipers, micrometers, indicators, gages, force testers Plasma cutter Tool Boards **Work Ethic Responsibilities: **ETHICS: E**nthusiasm, * T eamwork, H onesty, I *ntegrity, * C *haracter and * S *elf-Motivated **Absenteeism/tardiness: ** Is conscientious in being at work when scheduled and on time. Perform the highest possible amount of quality work in the least or standard amount of time. Follow documented processes and procedures. **Quality: ** Do good quality work the first time, avoiding rework. Make good quality decisions as it relates to the job functions. Exhibit problem-solving skills. **Safety :** Be knowledgeable of and adhere to all safety rules and regulations. Always be conscious of the safety implications of one's actions; consistently observe safety regulations and wear the required safety equipment. Do not jeopardize one's own safety or others in any way. Wear appropriate personal protective equipment (PPE) in all designated areas assigned by the company. Immediately report all near misses, safety concerns, and accidents. Safely and efficiently use any assigned equipment. **Lean: ** Participate in and support lean manufacturing programs and principles with a focus to reduce costs with quality products such as Total Productive Maintenance (TPM), Suggestion System, etc. Actively participate in Continuous Improvement to continually strive to improve our processes and procedures. Adhere to 5S: Sort, Set in Order, Shine, Standardize, Sustain. **Environmental: ** Employee is responsible for complying and supporting any environmental policies and programs put in place by Batesville Tool & Die, Inc. (BTD). Employee may not bring any environmentally hazardous substances or compounds into BTD and is always conscious of the impact on the environment. Support and adhere to Technical Specification (TS) and International Organization for Standardization (ISO) activities and procedures. **Other: **Perform any other duties as assigned with enthusiasm and without complaint. ***Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is continually required to stand, sit, walk, use hands to fingers, handle or touch and run the work center while focused on the required task. The employee is frequently required to walk, sit, reach above shoulders, and talk and/or hear. The employee is occasionally required to reach above shoulders, stoop, kneel, crouch, or crawl. The employee will also be required to frequently lift up to 40 pounds and occasionally lift up to 60 pounds. Please note that these physical demands are based on a typical workday. Physical demands may vary based on the task assigned that day. ***Environmental Conditions While performing the duties of this job, the employee is occasionally exposed to wet, humid conditions and moving mechanical parts. These environmental conditions are based on a typical work day. Conditions may vary based on the task assigned that day. ***Protective clothing/equipment required: Safety glasses Sturdy leather shoe/boot or steel-toed tennis shoe Hearing Protection You should be proficient in: Machine Setups for Production Runs Mechanical Troubleshooting Skills Excellent Communication Skills Machines & technologies you'll use: Stamping Press (Minster, Aida)

Shift 1 (United States of America) Rotex is looking for a Welder/Fabricator to join our team in Cincinnati, Ohio. This is a first shift position, with a standard 5-day, 8-hour work schedule. First shift schedules are Monday-Friday from 6:00AM - 2:30PM, with frequent mandatory overtime extending those hours from 5:00AM - 3:30PM, plus most Saturdays. This position pays a competitive rate per hour, with guaranteed annual increases, and opportunities for overtime. Work You'll Do: Perform welding of ferrous metal parts including setup, fit-up, tack welding, gas burning and cutting, finish welding, straightening, and checking. Fabricate sub-assemblies and assemblies such as: Box Frames, Cooler Decks, Bases, Bottom Pans, Top Covers, and items of 16 gage and heavier, etc., in accordance with drawings and other specifications using necessary equipment, tools, jigs and fixtures. Welding processes are: SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Cored Arch Welding). Breakdown of Essential Job Functions With technical drawings or plans as a guide use applicable tools to create a joint or intersection of two metal pieces. Examine work to ensure the joint is strong before moving on to the next component in the plan (30%) Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers (30%) Weld components in flat, vertical, or overhead positions (30%) Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications (5%) Perform routine maintenance on equipment and determine when and what kind of maintenance is needed (5%) Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems - Supplements all processes. Other duties as assigned. Basic Qualifications: Welding Certification from an accredited institution. 3+ years of relevant experience in welding and fabrication. Ability to read and interpret Blueprints for weld fabrication. Ability to successfully complete pre-hire weld tests. Preferred Qualifications: Communication: Be able to speak to others to convey information effectively so that the job can be completed in the manner it should be. Be able to clearly articulate an opinion to tell when something is wrong or is likely to go wrong. Listens to and understands the views of others. Be confident enough to communicate difficult messages. Teamwork: Supports team efforts; cooperates and works well with others in the pursuit of team goals; builds group cohesiveness by emphasizing team objectives and reinforcing cooperation; creates strong morale in his/her team and across functions; shares wins and successes; brings a feeling of participation and belonging to the team. #IND123 #LI-AS1 #LI-ONSITE Who we are: Rotex pioneered the dry separation industry and grew to become a global manufacturer of industrial separation equipment, becoming a subsidiary of Hillenbrand, Inc. in 2011. Rotex now sets the standards for maximizing yield and minimizing waste for a host of Fortune 500 companies in processing facilities around the world. The Rotex story of superior separations starts with the people who work here. Our associates are our number-one asset; this fine group of people helped Rotex expand from a regional Cincinnati company to a strong global competitor. And we're not done yet. We're always looking for great people to add to our story and to help us write the next chapter in our history. Rotex is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose - Shape What Matters For Tomorrow™ - we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: ******************** EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Rumpke is a family-owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Welder Apprentice is responsible for performing repair and maintenance on containers and/or the vehicle fleet. This position is an entry-level position to our welding department. Responsibilities of Position: Perform sanding, grinding, cutting, welding and other fabrication or repair work on company containers, compactors, and other equipment in a safe manner in compliance with all local, state, and federal regulations and company policies Weld steel using Mig and Arc welding equipment Maintain a clean, safe work area in compliance with Company and OSHA standards Complete required paperwork utilizing computer system Install lids and wheels on containers Perform paint repairs as needed Assist in other projects or areas of the shop as needed Communicate in a manner that promotes good relationships with internal/external customers, clients, co-workers, and management Perform other duties as assigned Supervisory Responsibility: This position will not manage employees Skills & Abilities Needed for Position: Ability to properly learn welding, torching, and cutting using a plasma cutter Ability to utilize standard shop hand tools, measuring devices, and equipment Ability to be trained to operate a forklift safely Basic computer skills Experience & Knowledge Needed for Position: Welding, torching and grinding skills preferred Physical Requirements in a Regular Workday: Continuously lifting/carrying a max of 35 lbs Frequently lifting/carrying a max of 50 lbs Occasionally lifting/carrying a max of 75 lbs Rarely lifting/carrying a max of 100 lbs Continuously pushing/pulling a max of 20 lbs Frequently pushing/pulling a max of 75 lbs Rarely pushing/pulling a max of 100 lbs Frequently working outside in wet/humid conditions Continuously working in changing temperatures Continuously working in areas of dust, odors, mist, gases, and other airborne matter Continuously stooping/kneeling/crouching/crawling Continuously climbing and/or balancing Continuously sitting/standing/walking Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas Exposure to residential and commercial waste Ability to work overtime, weekends, and/or holidays Legally eligible to work in the United States Valid driver's license (if applicable) Must successfully complete pre-employment testing Must be able to read and speak the English language This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties, and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish an employment contract and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Working at our Beavercreek Site: GE Aerospace operations have been part of the Beavercreek community for over 70 years! Our Beavercreek facility manufactures gas turbine tubes, ducts, and manifolds, and also has complex machining, fabrication and investment casting capabilities. Product engineering, new product development and testing is performed on site. This facility also does repair and overhaul of tubes, ducts, and manifolds. We have been awarded OSHAS's highest safety rating. Role Overview: * Welds together metal components as specified by layout, blueprints, diagrams, or manufacturing operations sheet (MOS), using Tig welding equipment. * Connects cables from welding unit to obtain amperage, voltage, slope, and pulse as specified. Starts power supply to produce electric current. * Manually guides torch along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * Welds in flat, horizontal, vertical, or overhead positions. * Examines weld for bead size and other specifications. * Manually applies filler rod to supply weld metal. Cleans weld joint or workpiece. Prepares rework parts for welding. * Positions or clamps workpieces together or assembles them in a jig or fixture. * May tack assemblies together. * Will use a computer daily (checking email, viewing/downloading shop drawings and instructions) The Ideal Candidate: * Will have the ability to perform the following: * Subtract, multiply and divide fractions, decimals and whole numbers * Apply common sense understanding to carry out instructions in written, oral or graphic form * Apply learning and experience to deal with variables within specifications * Read safety rules in the use and maintenance of shop equipment. * Read related technical material and apply principles to daily operations (this includes reading and interpreting blueprints). * Accurately read and complete forms * Complete the Elano welding vision test (as a new hire and annually) * Use standards shop measuring devices (calipers and micrometers) Required Qualifications: * High School diploma or GED * Successful completion of a TIG Welding Training Course (formal program) * Or previous experience as a TIG welder with 6 months experience * Successful completion of the Unison-Dayton TIG Welding Assessment Preferred Qualifications: * Team Player and willing to operate in a professional environment * Takes Pride in the work they are doing * Excellent attendance and punctuality history and availability to work overtime as needed * Makes decisions based on experience and available data * Strives to meet or exceed job requirements * Able to work effectively when receiving general supervision (This involves performing routine assignments alone.) * Able to carry out operations according to set procedures or sequences. * Ability to receive and act on constructive feedback Additional Information: * Wages $22.00 - $27.56 per hour based on experience * Additional $1.50 Premium for 3rd shift!! * Able to lift up to 40 pounds. May occasionally lift 50 pounds (with assistance). * Your safety is important to us, so we provide most protective gear including hearing protection if needed. Strong safety focus with daily/monthly reviews and we have been awarded OSHAS's highest safety rating. GE Aerospace provides a $125 voucher towards the purchase of safety shoes as well as a voucher for safety prescription glasses if needed. * You'll be operating and working around moving machines - stand-up forklifts, mobile carts, cranes, etc. Due to normal machining operations there may be dust, fumes, or smoke (not over OSHA Permissible Exposure Levels (PEL)). * Team oriented, ability to share ideas and make recommendations with peers and leadership * In addition to sitting and standing while operating equipment, some activities may require standing in one place for long periods, walking around, or climbing stairs. * Most areas are climate controlled. Closing: We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description Job Opportunity: Pipe Welder Pay: $36 per hour Are you an experienced Pipe Welder looking to take the next step in your career? Join our team in Cincinnati! Key Responsibilities: Read and interpret blueprints Perform high-quality TIG and Stick welding on steel pipe Work independently and collaboratively within a team Ensure compliance with safety standards Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience Strong blueprint reading skills Mechanical and industrial experience Ability to work overtime when required If you're ready to contribute your skills and grow with us, apply today! Job Type: Full-time Pay: $36 Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Weekends as needed Ability to Commute: Cincinnati, OH (Required) Work Location: In person

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter This is where my hands make life-sustaining products You are driven by the knowledge that the products you help make saves and sustain lives. You can move quickly, address questions, and encourage teammates, all while getting quality products out on time. You are calm, positive, and a key part of a fast-paced environment that emphasizes camaraderie and teamwork. As a Welder, you are happiest when you are moving, and we will not disappoint! Baxter is known for its speed and high-quality product. Our manufacturing operations are around-the-clock to meet the needs of our customers. Our high-caliber talent works through the challenges at hand while pushing toward meeting client order needs. Different shift assignments allow for flexibility and safety. Your team Baxter is focused on saving and sustaining lives by manufacturing high-quality products. We strive to create quality products for our customers each day. Delivering life-saving products is about getting them right, and attention to detail is how we make sure we meet that challenge. We are a team that supports each other throughout each shift. Working together in a supportive and open culture makes our processes evolve for the better and engages our workforce. You'll be offered extensive training, and the tight-knit working environment within the Manufacturing team means employees get additional training from their direct manager and peers when needed. What You'll Be Doing Check during assembly for proper weld location and size, proper fit, and operation of sliding or rotating parts. Make repairs when necessary. Check for weld spatter, burn-thru, and other visible weld defects and remove or repair when necessary. May require use of oxyacetylene or plasma arc cutting torches or automatic programmable welder. Check completed work per job instructions and print specifications. Properly set and adjust all welding parameters to maintain quality welds. Also load and assist in welding wire (spool) changes. Perform all job set-ups, rework on painted parts and finished products and must be willing to perform all other operations in the department. Perform minor repairs and preventative maintenance of welding equipment and fixtures. May be required to record measurements. Clean and change torch tips and nozzles, and clean conducts or lines with solvent as required. Clean or change helmet lenses as necessary. Report labor. Move completed parts to designated areas. Move stock to and from workstations, stock racks and holding areas. May be required to rack and un-rack parts. Responsible for schedule adherence, safety, housekeeping, rejects, and productivity applicable per Standard Operation Procedures (SOP's). Responsible for both quality and quantity of work: Participate in team activities and problem solving sessions as required. Communicate problems and/or solutions to appropriate team member. Must follow processes and procedures as written. As needed, document and/or chart production data to aid in problem identification, quality feedback and production scheduling. Troubleshoot problems and repair when necessary. Train, instruct and assist other operators in their duties as required.to ensure quality product and smooth flow. Evaluate defective material and tooling, faulty operations, questionable conditions and potential work stoppages. Advise and recommend alternatives to appropriate person. (May require the use of computer and telecommunication device.) Ensure that work area and equipment are maintained in a clean, orderly and safe condition. Follow prescribed safety regulations. The above description covers the most significant duties performed but does not exclude other occasional work assignments not mentioned. The inclusion of which would be in conformity with the factor degrees assigned to this job. What You'll Bring Must Pass Weld test Successfully complete GMAW School High School Diploma or (GED) General Education Degree (applies to anyone hired after 1997). We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all our employees, and we strive to be more transparent with our pay practices. To that end, this position has a pay rate of $22.27 an hour. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

Job Purpose: Welders provide support for manufacturing heavy-duty industrial equipment. The work includes tacking, fitting, welding, and metal fabrication, using a range of materials from thin-gauge to thick plate metals. Essential Duties and Responsibilities: Weld and assemble mechanical parts and components with a high level of precision and attention to detail. Follow instructional documents and specifications with a high level of accuracy. Learn and apply proper installation methods for hydraulic systems, wiring, engine, and assembly methods. Assist team members and perform other duties as required. Take personal accountability for job duties and results. Maintain a clean and orderly work environment.

←Back to all jobs at ETI GLOBAL Welder & Fabricator ETI GLOBAL is an EEO Employer - M/F/Disability/Protected Veteran Status E. Excellence T. Teamwork I. Integrity ETI is an independent heavy equipment dealer specializing in used, rebuilt and aftermarket parts for the construction and mining industry. We are looking for a motivated individual to help grow our team and business further, with an emphasis on quality, speed, and proficiency, we want people that want to make a difference. Job Description Welder/Machinist Position Looking for an experienced welder familiar with welding repairs in the heavy equipment industry. Job Responsibilities: Welding of machined parts for hydraulic repairs Welding/repairing heavy equipment components-Blades, buckets, etc. Performing line boring/welding repairs Maintain a clean and safe workstation Helping technicians with repairs and tear-downs Miscellaneous fabrication and repair work Experience/Qualifications/Skills: Must have previous experience welding multiple processes Good Problem-solving skills Must be Reliable, Prompt, and have sense of urgency. Good mechanical Skills, ability to use hand and power tools Must be able to move large & heavy components. Previous Line-boring experience a plus M-F 8-5:30 Business hours with frequent opportunities for overtime Occasional Saturdays when workload requires Health, Dental, Vision, PTO, Holiday, and 401K all available. Must be able to pass drug screen Please provide a resume with references and applicable experience Please visit our careers page to see more job opportunities.

Quality Mechanicals is now hiring Combo Pipe Welders who are permanently located in the Cincinnati, Dayton, Southeastern Indiana and Northern Kentucky areas. Quality Mechanicals is a fully insured mechanical piping contractor, located near downtown Cincinnati. Skills Required: Stainless & Carbon Steel pipe welding. Must be skilled in Tig Welding. Additional Requirements: Completed and acceptable weld test to be performed in our shop, test consists of: 3' Sch 10 stainless steel Tig test 5G - Complete in 1hr or less 2' Sch 80 carbon steel tig test 6G - Complete in 1.5hrs or less Benefits and Compensation: Competitive WEEKLY pay, medical, health savings reimbursement, dental and life insurance, 401k program with company matching, paid time off and paid holidays. Please note that our pay scale is based on experience and skill, to be determined during the interview process. Our hiring process includes a weld test and in-person interview to be completed at our shop in Northside. To apply please provide your resume through this job posting to be considered. QMI is an Equal Employment Opportunity Employer. Employment selection and related decisions are made without regard to race, color, sex, religion, age, national origin, disability, sexual orientation, gender identity, pregnancy, veteran status or any other characteristic protected under federal, state or local law. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Engineered Air Movement, Cincinnati Fan is a leading manufacturer of industrial fans and blowers for OEMs and industrial applications With its high attention to detail for products that are durable, energy efficient, and unparalleled in performance, companies rely on Cincinnati Fan to provide comfort and mission critical and industrial cooling solutions. How you will make an Impact (Job Summary) SPX is a diverse team of unique individuals who all make an impact. As a welder, you will work as a team to meet on time delivery and exceed customer satisfaction. You will complete a variety of tasks with the overall goal of creating functional metal components primarily by performing MIG tack welding operations. Cincinnati Fan is expanding our weld team and has multiple openings on day shift, 6am-230pm Monday - Friday, and 2nd shift, 230pm - 1am Monday - Thursday. We are looking for individuals that want to be part of a team and have experience in production welding. Pay based on experience and weld test. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: Safety Follow all safety rules and adhere to core value of business Maintain general work areas and/or equipment used in a clean and orderly condition Ensure proper and effective operation of machine and tools throughout entire process. Report repairs and/or issues to team lead or supervisor Quality Confirm material, sizes, and parts match work order/job tickets Ensure all parts and surfaces are free from defects Able to self-monitor quality of own work, and report to lead or supervisor unusual, defective, or operating difficulties Complete all tasks and work within designed quality guidelines Accurately document work performed using company required documents and procedures Delivery Ability to weld to specifications, and out of position, on mild steel and stainless steel including vertical up Read blueprints, schematics, work orders and/or assembly sketches Coordinate staging and sequencing of parts, productions items, and product components Prepare both metals and work surfaces for the production process Select appropriate tools, materials, gas ratios, and build fixturing/shipping brackets as needed Transfer completed product to next workstation/process using cranes and forklift as needed Perform light maintenance on equipment, machines, and other devices used in the normal course of work performed Complete tasks as directed with minimum supervision Culture Desire to do the right thing Team player, assisting other team members and departments as needed with other duties not routine to position Punctual, on time, ready to work designated shift, every day What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience 1 year MIG welding in production/manufacturing environment Mechanical aptitude Preferred Experience, Knowledge, Skills, and Abilities Basic math skills Strong attention to detail and quality, working within precise limits and/or standards of accuracy Forklift certification Overhead crane operation Self-driven, able to work independently, and as a team Excellent problem solving and troubleshooting skills Education & Certifications High school diploma or equivalent Working Environment The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Solid levels of physical stamina and strength Lifting to 50 pounds with assistance Sitting, standing, walking, bending, grasping, pushing, pulling, crawling, climbing, twisting, reaching, and working at heights Perform repetitive motions Plant environment with exposure to harsh weather, excessive heat/ cold, and/or excessive noise How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

Full-time Description The MIG and TIG Welder will assemble pieces of metal together or repair damage in metal components using heavy machinery that emits high heat, melting the metal into shape. Duties/Responsibilities: Reads blueprints and drawings and takes or reads measurements to plan layout and procedures. Determines appropriate welding equipment or method based on requirements. Sets up components for welding according to specifications. Operate angle grinders to prepare the parts that must be welded. Aligns components using calipers, rulers, etc., and clamps pieces. Welds components using manual or semi-automatic welding equipment in various positions. Tests and inspects welded surfaces and structures to discover flaws. Grinds and finishes parts. Operates welding equipment and other machinery in a safe manner. Maintains 6S (sort, set, shine, standardize, sustain, safety) standards in all work stations. Completes other duties as assigned by supervisor. Skills: Knowledge of blueprint reading. Working knowledge of AWS and OSHA safety standards. Basic computer skills. Basic math skills (ex. addition, subtraction, multiplication, fraction/decimal equivalents). Mechanical inclination. Reliable and highly motivated. Great attitude and attendance. Steady hand. Organizational skills and attention to detail. Time management skills with a proven ability to meet deadlines. Interpersonal and written communication. Abilities: Fit-up components and layout inspection. Read and interpret technical documents and drawings. Function well in a high-paced and at times stressful environment. Work well with others on a team. Solve problems quickly and efficiently. Provide own tools (hand tools). Willingness to use protective clothing (ex. face shield, gloves, etc.) Willingness to have performance measured daily. Required Education and Experience: Minimum 2-5 years of welding prior work experience. Experience welding sheet steel, stainless steel, and some aluminum with a high level of quality and efficiency. Experience using a variety of welding equipment and procedures (ex. MIG, TIG). Ability to perform in a fast paced environment. Ability to successfully pass a weld test. Preferred Education and Experience: High school diploma or equivalent. Welding school certification. Knowledge of brazing and press brake operations. Forklift certification. Physical Requirements: Uncontrolled environmental conditions: noise, dust, dirt, and mobile equipment. Routine, repetitive lifting up to 35 lbs., occasional, heavy lifting, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day. Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, feeling, and walking 8 to 10 hours per day. Ability to work up to 8-10 hour shifts and overtime as required by the work. Use of all limbs, dexterous and steady use of hands and arms for long periods of time. Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Primary Duties * Have complete knowledge of the machine he/she is operating, including the setting of all controls according to the type of material he/she is working with * Maintain and set up the machine * Keep accurate records of material produced * Instruct helper in order to operate as a team in a safe and proper way * Pull parts for spot welding of sub-assemblies from the storage area as needed * Follow standardized work rules Skills/Abilities * Basic reading skills * Background in welding * Strong knowledge of machines and materials he/she is working with * Ability to follow directions * Ability to work with little supervision * Ability to work well with others * Ability to communicate well with others Work Environment * Continuous exposure to Mechanical hazards and moving objects * Frequent exposure to temperature extremes, noise levels >80 db, vibration, and material handling equipment * Occasional exposure to humid/arid conditions, fumes, dust, mists, gases, allergens, and insect bites Physical Demands * Must have the ability to speak and hear clearly * Must be able to see well including depth perception and the ability to distinguish between colors * Requires frequent (4 or more hours per day): standing, sitting, lifting, carrying (25-50 lbs), balancing, stooping, finger movement, and twisting * Occasional walking, kneeling, crouching, pushing & pulling of heavy carts, and reaching (overhead and to the side) may be required Expected Hours of Work 8 hour shifts M-F with weekend and daily overtime hours as required for production Required Education and Experience Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that may be required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. AAP/EEO Allegion is committed to complying with its Equal Employment Opportunity Policy and will not discriminate based on race, sex, color, national origin, creed, religion, pregnancy, age, disability, military status, protected veteran status, sexual orientation, gender identity, genetic information, marital status, or any legally protected status (collectively, "protected status"). We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Primary Duties • Have complete knowledge of the machine he/she is operating, including the setting of all controls according to the type of material he/she is working with • Maintain and set up the machine • Keep accurate records of material produced • Instruct helper in order to operate as a team in a safe and proper way • Pull parts for spot welding of sub-assemblies from the storage area as needed • Follow standardized work rules Skills/Abilities • Basic reading skills • Background in welding • Strong knowledge of machines and materials he/she is working with • Ability to follow directions • Ability to work with little supervision • Ability to work well with others • Ability to communicate well with others Work Environment • Continuous exposure to Mechanical hazards and moving objects • Frequent exposure to temperature extremes, noise levels >80 db, vibration, and material handling equipment • Occasional exposure to humid/arid conditions, fumes, dust, mists, gases, allergens, and insect bites Physical Demands • Must have the ability to speak and hear clearly • Must be able to see well including depth perception and the ability to distinguish between colors • Requires frequent (4 or more hours per day): standing, sitting, lifting, carrying (25-50 lbs), balancing, stooping, finger movement, and twisting • Occasional walking, kneeling, crouching, pushing & pulling of heavy carts, and reaching (overhead and to the side) may be required Expected Hours of Work 8 hour shifts M-F with weekend and daily overtime hours as required for production Required Education and Experience Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that may be required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. AAP/EEO Allegion is committed to complying with its Equal Employment Opportunity Policy and will not discriminate based on race, sex, color, national origin, creed, religion, pregnancy, age, disability, military status, protected veteran status, sexual orientation, gender identity, genetic information, marital status, or any legally protected status (collectively, “protected status”). We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. © Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Job Description Job Summary: We are seeking a skilled Welder specializing in aluminum MIG welding to join our small metal fabrication team. This position involves performing high-quality welds on aluminum components, interpreting weld prints, and ensuring parts meet specifications. The ideal candidate will be mechanically capable, with attention to detail and basic computer skills for job tracking purposes. Key Responsibilities: Perform aluminum MIG welding on various components based on technical drawings and specifications. Read and interpret weld prints and blueprints accurately. Conduct quality inspections on completed welds to ensure they meet company standards. Assist with material handling and organization of completed parts. Follow safety protocols and wear appropriate PPE during all operations. Use basic computer skills to log completed work and update job tracking systems. Qualifications: Experience in aluminum MIG welding required. Ability to read and interpret technical weld prints and blueprints. Mechanically capable with a strong attention to detail. Basic computer skills for job tracking and data entry. Physical stamina and ability to lift up to 50 pounds. Team-oriented mindset with effective communication skills. Benefits: Competitive hourly wage based on experience. Opportunities for skill development and career growth. Paid time off and holidays. Supportive team environment in a small business setting. Powered by JazzHR du J6o836lU

**Starts at $25/hour. 2nd Shift has a $3.00/hour shift premium** United Alloy is a preferred designer, manufacturer and powder coater of certified metal tanks, skids, frames, trailers, chassis, and related products crafted to world-class quality standards in strategic partnership with Fortune 500 OEM customers.UA products are proudly “Made in the USA”. In addition to being made in the USA, UA is also 9001 certified, and has been recognized as a WBENC woman/minority owned business.   CULTURE United Alloy empowers and entrusts our employees to manage the responsibilities of both their work and home lives. We are an agile team that produces extraordinary results, setting the standard in safety, quality, productivity, and profitability. Employees act with a sense of ownership, take initiative to problem solve and is committed to the company's mission, their team and themselves.   United Alloy is supportive and encouraging of our employees, we are able to help make their dreams become a reality. At UA, every employee matters to us. We want everyone to have their own success story in their personal and professional lives. It's one way that makes us an actively engaged team, inspired to win together.   SUMMARY This position welds fabricated components, per custom or stock specifications, for sale to customers in conjunction with customer quality requirements and United Alloy manufacturing philosophies. Monitoring welding performance and efficiency are essential. HOURS: Monday - Thursday 3:00pm-1:00am. Overtime worked on Friday based on business need. WHAT YOU'LL DO Can set up and weld in 1-2 weld work center(s) Welds product using fixturing (if applicable) with minimal supervision Utilizes hand tools, fixtures, and clamps for small welding applications Can interpret basic elements of a blueprint, including welding symbols Can identify types of joints and welds Can meet UA weld aesthetic standards per customer specifications Can set up and maintain welding machines including changing wire and monitoring gases Can successfully perform a tank leak test Can monitor and maintain welding consumable and supply stock Understands cross check concepts and inspects product according to Inspection Control Plan Accurately tags material and product according to WI-0002 Product Identification Understands non-conforming process according to SOP-003 Follows all safety policies and standards Maintains work center efficiency of 95% Can maintain a high degree of quality, must not have excessive scrap Understands and can use basic math principles including: addition, subtraction, multiplication and division Accurately and efficiently perform all required PM on equipment Able to successfully weld 1st articles and PPAPs Capable and willing to train/mentor other welders Can make minor repairs to equipment and support equipment Recommends and helps implement process improvements Inspects own work for quality standards Performs other duties as assigned WHAT YOU'LL NEED The individual must have an exposure to metal fabrication concepts and processes Must pass a UAI AWS D1.1 welding test The individual must possess a keen sense of attention to detail Must possess the ability to operate overhead cranes, tape measure and calipers, basic hand tools and air tools Must be able to determine material types and gauges Must be able to read and interpret blueprints Must be able to regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move 100 pounds with an assist 12 Expected Behaviors of Actively Engaged Person - 100% Responsible, Trustworthy, Team Player, Clear Communicator, Empathy, Humility, Emotional Self-Control, Resolves Conflict Directly, Positive Attitude, Respects Others, Problem Solver, and Agile. BENEFITS In addition to excellent starting wages, we offer a competitive compensation and benefits package as well as numerous perks. Medical, dental and vision Generous RTO and Vacation policy  401(k) with company match Bonus opportunities Paid training  Company paid holidays Earn a competitive salary and performance-based bonuses NOTE: Given the nature/size of our product and customer requirements, we require a stringent hiring process to ensure the highest quality product. Qualified candidates must successfully complete: Basic Skills/Measurement Test | Blueprint Reading Test | Pre-Employment Physical & Drug Screen Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, sit, walk, bend, twist, stoop, pull, push, assemble, and carry for extended periods of time. Ability to lift and/or move up to 25 pounds regularly, frequently lift or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with an assist. Work Environment: Ability to perform in a manufacturing environment that may have high noise levels, dust, chemicals, oil, and grease. Ability to work in an environment that may be either hot, cold or humid.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR vaytpgk Ep2

Job Opportunity: Pipe Welder Pay: $30-$32 per hour Are you an experienced Pipe Welder looking to take the next step in your career? Join our team in Cincinnati! Key Responsibilities: Read and interpret blueprints Perform high-quality TIG and Stick welding on steel pipe Work independently and collaboratively within a team Ensure compliance with safety standards Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience Strong blueprint reading skills Mechanical and industrial experience Ability to work overtime when required If you're ready to contribute your skills and grow with us, apply today!

C23 Welder Working at our Cincinnati Aviation Component Service Center: Our ACSC facility develops and conducts a wide array of engine component repairs - including rotating parts, complex assemblies and nozzles on 29 different engine models. * Perform layout, set-up, and weld on a variety of aircraft engine component parts and assemblies. * Working from planning or written instructions, prints or sketches. Fabricate, repair or rework using all required welding and cutting processes which may include manual arc processes (GTAW, GMAW, SMAW, TIG) semi-automated weld processes (GTAW, PAW, LW, EBW,), machine weld processes (RSW, Dabber,) and oxyacetylene welding. * In addition, may use oxyacetylene cutting, plasma cutting, flame brazing/soldering, TIG brazing and arc brazing. * Use argon chambers and gas back-ups. * Fabricate heat sinks and related items to perform individual weld operations. Using file, bench grinders, hand grinders, etc., to perform welding preparation, defect removal and manual dimensional restoration. * Achieve certification on required processes. * Ability to bench, planish, peen, roll, forge, stretch/shrink to restore dimensional and structural integrity on various engine hardware. * Use all types of measuring instruments. * Perform fluorescent dye penetrant as required, maintain associated paperwork, work to required levels of quality and efficiency. * Direct or train others and perform related duties as required. * Interact with engineers with the design of tooling and repair process on repair development projects. Required Qualifications: * High school diploma or General Education Degree (GED) * 5 years verifiable GTAW Weld experience including reading various measuring instruments, such as calipers and micrometer, while working from prints, sketches, planning instructions to weld a variety of parts and assemblies Preferred Qualifications: * Previously held weld certification(s) in corrosive resistant and heat resistant ferrous alloys, nickel base alloys, cobalt-base alloys, aluminum alloys, and titanium alloys. * Previous welding and fabrication experience on aircraft hardware. * Ten years or more verified GTAW experience * Ability to fabricate, repair or re-work using processes listed above; use of argon chambers and gas back-ups. * Proficiency in the fabrication of heat sinks and related items for performing individual weld operations * Demonstrated ability to use files, bench grinders, and various hand and power tools, etc. to restore areas repaired to required dimensions * Experience with fluorescent dye penetrant. * Weld schooling certificate (1 point) Additional Information: * Must be able to lift and/or move up to 40 pounds on occasion. Items more than 40 pounds will be lifted with assistance. * Must certify within 8 hours per base material group as required and periodic certification thereafter * Ability to learn and operate material handling and lifting devices, including ability to obtain forklift license as required. * Must be able to pass welding skills demonstration test * Must pass the eye requirements per AWS D17.194 Closing: We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No