Advanced engineer jobs in Davie, FL - 171 jobs

*No C2C *Must be a US Citizen or Permanent Resident The GxP / Computer System Validation (CSV) Engineer is responsible for ensuring that computerized systems used in regulated environments comply with applicable GxP regulations (e.g., GMP, GCP, GLP) and industry standards. This role leads and supports validation activities throughout the system lifecycle, ensuring systems are fit for intended use and maintained in a validated state. Key Responsibilities Validation & Compliance Plan, execute, and document CSV activities in accordance with GxP regulations, FDA guidance, EMA guidelines, and industry standards (e.g., GAMP 5). Develop and review validation deliverables including: Validation Plans (VP) User Requirements Specifications (URS) Functional / Design Specifications (FS/DS) Risk Assessments IQ/OQ/PQ protocols and reports Traceability Matrices Ensure computerized systems remain in a validated state through effective change control, deviation management, and periodic review. System Lifecycle Support Support validation activities across the full system lifecycle (concept, implementation, operation, and retirement). Assess the impact of system changes, upgrades, patches, and configuration changes on validation status. Perform vendor assessments and support supplier audits as required. Quality & Audit Support Ensure compliance with data integrity principles (ALCOA+). Participate in internal audits, regulatory inspections, and customer audits. Respond to audit findings and support CAPA development and execution. Cross-Functional Collaboration Collaborate with IT, Quality Assurance, Engineering, Manufacturing, Clinical, and external vendors. Provide CSV guidance and training to stakeholders. Act as a subject matter expert for CSV and GxP computerized systems. Required Qualifications Bachelor's degree in Engineering, Computer Science, Life Sciences, or a related field. 3+ years of experience in GxP Computer System Validation in a regulated environment. Strong knowledge of: FDA 21 CFR Part 11 EU Annex 11 GAMP 5 Data Integrity principles Experience validating systems such as: ERP (e.g., SAP) LIMS, MES, QMS Clinical Trial Management Systems (CTMS) Laboratory or manufacturing equipment with software components Excellent documentation, analytical, and communication skills. Preferred Qualifications Experience with cloud-based and SaaS systems validation. Familiarity with Agile or SDLC methodologies in regulated environments. Experience supporting FDA, EMA, or other regulatory inspections. CSV certification or quality-related certifications (e.g., ASQ, ISPE).

AV is seeking a dynamic and skilled Digital Signal Processing (DSP) Engineer with FPGA experience to join our growing team in Sunrise, Florida. This is an exciting opportunity to work on advanced technologies that shape the future of defense and communications systems. As a key technical contributor, you'll develop innovative DSP architectures and algorithms, integrate solutions into real-time embedded systems, and serve as a Subject-Matter Expert (SME) across multiple platforms. Primary Responsibilities Include: Design, simulate, and implement moderate to complex digital signal processing modules using tools like MATLAB, Simulink, and VHDL/Verilog for FPGA platforms. Collaborate with cross-functional teams - including hardware engineers, software developers, and system architects - to develop and integrate DSP solutions. Receive and interpret technical instruction for defined project goals and collaborate on broader system designs. Participate in meetings and communications with customers and partners to support project requirements and ensure deliverables are aligned with expectations. Apply modern DSP techniques, algorithms, and methodologies to enhance existing architectures and develop cutting-edge solutions. Contribute to complex problem-solving through hands-on development and team brainstorming. Required Qualifications: Bachelor's Degree in Electrical Engineering (or related field) and 6+ years of prior relevant experience or Master's Degree and 4+ years of prior relevant experience. Ability to obtain and maintain a US Government Security Clearance. DSP Qualifications: Proficiency in Intermediate Digital Signal Processing Algorithms. Solid understanding of DSP concepts such as filtering, FFT, and sampling theory. Proficiency in Communications theory. Some Proficiency in programming languages preferably C or C++. FPGA Qualifications: Strong interest in FPGA development and low-resource digital design techniques. Experience with RTL design in VHDL simulation tools, and synthesis flows. Familiarity with FPGA platforms (e.g., Xilinx, Microchip) and embedded system development is a plus. Preferred Technical Competencies: Software Defined Radios Digital Signal Processing Theory Signal Processing Algorithms: e.g., Rate conversion, Correlation and Filtering C, C++ Programming: Object Oriented Design DSP Algorithms using MATLAB/Simulink: Develop and pick up MATLAB models for bit exact design verification; May use SIMULINK (system generator) as an interim step. DSP and FPGA Code Optimization Modem Design (SATCOM, wireless, Cellular & SDR) Physical Layers e.g. GSM, Wi-Max, Wi-Fi, Bluetooth Real Time Debugging Signal Impairments Testing, BER Testing: Modem Qualification experience. Design Documentation Performance Verification and Validation Software/Hardware implementation collaboration System Requirements Analysis TFS, GIT Revision Control Tools Clearance Level No Clearance The salary range for this role is: AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Role Summary/Purpose: The Process Engineer - Plasma Spray & HVOF will provide specialized expertise in thermal spray coating processes, focusing on Plasma Spray and High-Velocity Oxygen Fuel (HVOF) applications. This role is integral to supporting aerospace manufacturing operations, ensuring adherence to OEM standards, and driving continuous improvement initiatives. The engineer will collaborate closely with cross-functional teams to optimize coating processes, enhance product quality, and maintain compliance with industry regulations. Essential Responsibilities: Lead the development, implementation, and optimization of Plasma Spray and HVOF coating processes to meet product specifications and quality standards. Provide technical support to manufacturing teams, addressing process-related issues and implementing corrective actions as necessary. Create and maintain detailed work instructions, process flows, and technical documentation in compliance with aerospace industry standards. Ensure all processes align with OEM specifications and regulatory requirements. Conduct thorough root cause analysis for process deviations, quality issues, and failures. Develop and implement corrective and preventive actions to mitigate recurrence. Apply lean manufacturing principles to streamline processes, reduce waste, and improve efficiency. Lead or participate in continuous improvement initiatives, utilizing tools such as Six Sigma, 5S, and Kaizen. Provide training and mentorship to team members on Plasma Spray and HVOF processes, equipment, and safety protocols. Foster a culture of knowledge sharing and collaboration within the team. Work closely with cross-functional teams, including design, quality, and production, to ensure seamless integration of coating processes into manufacturing workflows. Communicate effectively with stakeholders to report on process performance, improvements, and challenges. Qualifications: Bachelor's degree in Chemical, Materials, Mechanical Engineering, or a related field or certification 3-5 years of hands-on experience with Plasma Spray and HVOF coating processes, preferably in aerospace manufacturing. Equivalent combinations of relevant education and work experience will also be considered in lieu of stated requirements Experience in creating and managing technical documentation and work instructions. Strong understanding of thermal spray coating technologies, materials science, and surface preparation techniques. Proficiency in CAD software (e.g., SolidWorks) for process design and simulation. Familiarity with aerospace industry standards, OEM specifications, and regulatory requirements. Experience in Maintenance, Repair, and Overhaul (MRO) environments is desirable. Demonstrated ability to perform root cause analysis and implement effective corrective actions. Strong analytical skills with attention to detail. Knowledge of lean manufacturing principles and experience in applying them to improve process efficiency. Ability to work collaboratively in a team environment, sharing knowledge and supporting team objectives. Physical Demands / Work Environment: The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently required to sit, stand, regularly use full range of motion of upper and lower extremities, regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Exposure to chemicals, noise, varying temperatures, and other workplace hazards however, PTI has established process, procedures, and protective equipment to reduce or eliminate exposures to these hazards and full compliance is a requirement of the job. About Us Propulsion Technologies International, LLC (PTI), a joint venture between GE Aviation & Safran Aircraft Engines, offers a great work environment with fast-paced, challenging and rewarding careers. Both GE & Safran are world leaders in the design and manufacture of aircraft engines, propulsion systems, & aircraft equipment. This could be your opportunity to join the exciting aviation industry! We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. PTI will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen.

Low Voltage Estimator / Engineer (Division 27/28) - South Florida Coranet Corp is a leading national provider of low-voltage solutions, including Structured Cabling (Div. 27), Physical Security (Div. 28), Wireless, and AV. We partner with top technology brands to design, install, and maintain solutions that make buildings smart, secure, and connected. We are focused on the built environment and partnering with developers and general contractors to bring their visions to life. We're recognized as one of the fastest-growing private businesses (Inc. 5000 for four year in a row) and are a certified Women-Owned Small Business. Role Description We're hiring a talented Low Voltage Estimator. This is a high-impact role in a growing division where your work directly influences our win rate, profitability, execution, and future growth. You along with fellow estimators and engineers will own Division 27/28 estimating end-to-end - building competitive bids for new construction and renovations, working with sales to close deals, creating proposals for new and existing customers. We are looking for someone who can estimate the full low-voltage scope including CCTV, access control, Audiovisual, Wireless, BMS, and Structured Cabling systems and can engineer/solve scope gaps when needed (RFIs, leveling, alternates, clarifications). Bluebeam is essential. Experience in access control/security systems is strongly preferred (this is an area we're actively strengthening). What You'll Do Own estimates from intake through submission: scope review, takeoffs, pricing, leveling, and final proposal. Perform detailed takeoffs using Bluebeam Revu (drawings/specs, symbol sets, markups, quantities, revisions). Support sales on customer pitches and bid reviews adding your professional and technical voice to theirs. Build complete Division 27/28 estimates: structured cabling, pathways/support, fiber, racks/cabinets, wireless, CCTV, access control, intrusion (as applicable), and related systems. Use sim PRO to build accurate estimates, labor, materials, assemblies, and job costing inputs. Evaluate plans/specs, identify missing scope, and produce RFIs/clarifications. Coordinate pricing with manufacturers, distributors, and subcontractors; negotiate and validate quotes. Support and weigh in on competitive bid strategy: alternates, value engineering, exclusions/inclusions, and risk flags. Hand off awarded projects cleanly to operations/PM: scope, assumptions, labor plan, and procurement notes. Track bid pipeline and follow-ups; assist with forecasting and award probability updates. Stay current on technologies and best practices in low-voltage, with a focus on security/access control. What We're Looking For (Must-Haves) 3+ years of experience in low-voltage integration projects, with 2+ years dedicated estimating experience (more is welcome). Proven experience in estimating Division 27/28 work for commercial new build and renovation projects. Strong Bluebeam Revu skills (takeoffs, markups, measurements, revisions, toolsets). Ability to read and interpret construction documents: plans, specs, addenda, schedules, and vendor cutsheets. Comfortable producing competitive bids and customer-facing proposals with clean scope language. Strong communication and follow-through with internal teams, vendors, and customers. Knowledge of residential and commercial low voltage technologies (WiFi, CCTV, access controls, and structured cabling systems), including products from industry leaders, with industry and/or manufacturer training and certifications as a plus. Proven track record of estimating numerous large-scale low-voltage / IT projects. Preferred Experience with Access Control & Security Systems (HID/LenelS2/Genetec/AMAG/Butterfly/Software House/Axiom/VMS platforms-any is a plus). Ability to "light engineer" when needed: device placement logic, system architecture considerations, riser/schematics coordination, and identifying design gaps. Experience with sim PRO (or similar estimating/ops platform). Knowledge of AV, BMS, lighting controls, or DAS (not required). Keywords: Low Voltage Estimator, Division 27, Division 28, Structured Cabling, Access Control, CCTV, Security Systems, Bluebeam Revu, sim PRO, Commercial Construction, RFP, Takeoff, Bid Leveling

Description Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits' products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini-Circuits' sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website. Position Summary: Supports the development of process technologies and the acquisition, development and qualification of manufacturing equipment for the realization of new products and support of the existing products during the life cycle. Supports the development of continuous improvement processes and oversees the development an implementation of manufacturing processes to achieve operational excellence. Salary Range: $75,000-$100,000 per year Job Functions: Set up new production lines; study and recommend improvements to existing processes; evaluate equipment to be used in manufacturing processes & ensure documentation is completed for qualification of newly required equipment. Oversee the development of precision, robust assembly fixtures and tooling for new product assembly for the prototype and production phase. Lead and actively participate in design review meetings. Work to continuously improve processes both on the production floor as well as transactional by collaborating with various departments. Work to improve safety, quality, and productivity using ergonomics, time studies, procedural analysis, product design/redesign, and specification of tooling, fixturing, controls and mechanization/automation. Assist in identifying opportunities for process improvement, waste removal, and cost reduction. Partner with outside departments on improvements to production output and troubleshoot/solve problems using RCA. Review new models being introduced (NPI) for manufacturability and monitor pilot runs. Identify and develop requirements for processes for manufacturing new products and provide training. Review and validate qualification plans, documentation, and new processes. Monitor the implementation of solutions to achieve objectives and expected benefits. Create, review and revise CPs created within the department, as necessary. Ensure that ECNs are submitted for corrections and/or improvements. Present KPIs and create presentations for leadership, as required. Stay current on industry trends, technologies, and best practices to drive innovation and optimization. Ensures issues are addressed at the root cause level and implemented on all similar products and processes. Ensures optimum utilization of equipment and space by coordinating the layout of production areas. Facilitate the implementation of lean principles and continuous improvement events. Apply design of experiments techniques and establish standards and procedures to resolve problems. The duties, responsibilities and expectations described above are not a comprehensive list and additional tasks may be assigned to the member, within the scope of the position. Qualifications: Bachelor's degree in engineering (or similar field) with a manufacturing process background. Two to five years of experience in electronics (electromechanical) manufacturing, mechanical engineering, mechanical design, manufacturing engineering or related field, working with the design, integration, and manufacturing of RF and Microwave electronic components and assemblies.Experience in semiconductor assembly and packaging. Experience with mechanical reliability testing and related equipment. In-depth knowledge of available assembly processes/technologies such as surface mount, high frequency assemblies, die and wire attach, encapsulation. Knowledge of industry standards, PCB technologies, plating processes, adhesive/encapsulant material and solder materials. In-depth knowledge of statistical process control and problem-solving techniques. Extensive knowledge of manufacturing problem-solving methods. Must be a curious and inquisitive self-starter who will take the initiative to conduct research, learn from colleagues and grow within the field. Strong team player with the ability to work effectively in a dynamic, international cross-functional team environment. Proven record of creativity and innovation. Exceptional interpersonal, oral and written communication skills with an ability to communicate project status and issues clearly to team members. Critical thinking and demonstrated ability to turn question/request to answer/solution in a comprehensive way. Detail oriented, thorough and extremely well organized with demonstrated follow-thru in performing tasks. Ability to manage multiple project workloads, meet deadlines and deliver on-time results, act with urgency, take ownership and be accountable. Working knowledge of AutoCAD and Solidworks, Proficient in Microsoft Office Suite and the use of the department database programs, such as A/S400, Arena, etc. Physical Demands:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, sit and use hands to operate a computer keyboard. The employee is occasionally required to reach with hands and arms. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cultural Focus: Displays enthusiasm and Passion for their work. Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement. Exercises sound Business Judgement, ensuring that efforts are on track with the Company's goals. Operates with the mindset of Customer Obsession - by meeting or exceeding expectations to both internal and external customers. Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions. Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail. Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork. Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect. Benefits: We offer a comprehensive package of benefits including [paid time off, medical/dental/vision insurance and 401(k)] to eligible employees. Comprehensive Medica, Dental and Vision Plans 401k and Profit -Sharing Programs Disability Insurance Life Insurance Employer-Sponsored Wellness Plans Commuter Benefits Hospital & Accident Indemnity Insurance Employee Benefit Advocate &Employee Assistance Program Additional Requirements/Skills: Comply, understand, and support corporate safety initiatives to ensure a safe work environment. Ability and willingness to abide by Company's Code of Conduct. May require some travel, overnight as necessary. Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

Description: The Validation Engineer II ensures the reliability, consistency, and compliance of our processes, equipment, and systems to meet regulatory requirements and quality standards. This role mainly drives the preparation and execution of validation documentation, including User Requirements Specifications, Installation, Operational and Performance Qualification Protocols and Validation Summary Reports. This includes leading and/or supporting validation of processes, equipment, and computer systems. The Validation Engineer II also provides assistance to system owners with impact risk assessments to identify the qualification and validation requirements, carrying out validation activities on equipment before returning or handing over to the system owner, and assist in arranging external services when required.Requirements: Duties and responsibilities Perform critical review of Validation Engineer I project plans and related documents to ensure implementation is accurate and timely. Independently lead and coordinate cross-functional projects and related resources to ensure completion in a timely manner. Communicate to management of performance against project plan. Perform data and technical presentation reviews as needed. Lead specific tasks or larger projects and ensure their successful completion, with minimal oversight. Develop and execute validation plans for both new and existing processes, equipment, and systems. Generate and execute qualification protocols to perform equipment qualifications and process validations. This includes establishing performance criteria, equipment troubleshooting, and ensuring compliance with safety and quality standards. Support company's Master Validation Plan (MVP) including commissioning activities and protocols executions and establishing re-validation criteria. Collaborate with cross-functional teams to provide validation-related guidance, solve technical problems, and contribute to project milestones. Assess the impact of process, material, or equipment changes on validation status and provide guidance on revalidation or change control measures. Identify potential risks associated with manufacturing processes and implement appropriate mitigation measures to minimize those risks effectively. Train personnel involved in validation activities and offer expertise and support to other departments on validation-related matters. Ensure personal and company compliance with all federal, state, company and regulatory bodies' regulations, policies, and procedures. Other duties as assigned. Qualifications Bachelor's degree in engineering or a related technical discipline (e.g. Biology, Chemistry, etc.). Proficiency in microbiology preferred. At least 2-5 years of experience in related Engineering role. Experience in validations preferred. Strong knowledge of FDA, AATB, and cGTP guidelines preferred. Experience in Tissue Banking, Pharmaceutical, Medical Device, or Biologics industry. Experience with Non-Conformance, Deviation, Complaint, and Corrective and Preventive Actions (CAPAs) preferred. Strong knowledge of relevant software applications (Microsoft Project, Word, Excel, and PowerPoint). Effective oral, written, communication, and presentation skills. Strong analytical and problem-solving skills. Project management skills preferred. Ability to be assertive and influence others and lead significant change. Working conditions Job requires working in-office, must be willing to work weekends and evening hours, as necessary. Must be willing to accommodate travel, as necessary. Office environment, laboratory environment, occasional clean room access, subjected to human tissue and associated hazards and biohazards.Physical requirements While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time. The employee may occasionally be required to pull, lift and/or move up to 20 pounds. Disclaimer: Applicants must be legally authorized to work in the United States. Vivex will not provide sponsorship or employment for candidates who require the 24-month STEM Optional Practical Training (OPT) extension. Please note this is not an offer of immigration sponsorship. Direct reports No direct reports (Individual contributor role) Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation, and training. Vivex Biologics, Inc. complies with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Who is Costa Farms? We're one of the world's largest horticultural growers-but without an ego to match our acreage. Our headquarters are in Miami, Florida, where we were founded in 1961. Costa Farms started on just 30 acres, and over the last 60 years, we've grown to more than 5,000 acres around the world. We have farms in North and South Carolina, Central and South Florida, and the Dominican Republic, plus an office in China. Costa Farms now employs nearly 6,000 people: engineers, marketers, accountants/analysts, human resources professionals, and of course, growers and plant scientists! Here at Costa Farms, we live by the values of H3: being Humble, staying Hungry, and always Hustling. The team rallies to the mission of being a lean, green, growing machine dedicated to enriching the world by bringing plants into everyone's life. True to that mission, we grow more than 1,500 plant varieties. Driven by the spirit of innovation, the team is always testing new plants and developing new solutions to make it easier for retailers and plant parents to enjoy plants. We're also continuously testing different ways of growing our plants to increase quality and improve their ecological footprint as one aspect of our many sustainability efforts. We cultivate plants, as well as a winning culture. Join the team, and you'll find opportunities to learn and grow. You'll collaborate with other driven, determined people who together keep Costa Farms an industry leader. You'll support and be supported by a team that cares about each other, our customers, our consumers, and our community. You'll also find right away that Costa Farms is committed to providing a diverse environment. We're proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetic information, disability, age, military status, marital status or veteran status, or any other group status protected by federal, state, or local law. DESCRIPTION: The Process Engineer is responsible for leading the optimization and implementation of projects designed to increase productivity and effectiveness. The successful candidate will be able to enhance business processes to maintain efficiency, reduce costs, enhance sustainability, and maximize profitability. Developing best practices and fostering sustainable cultural change. This position will be exposed to all areas of our business and manufacturing operations. Requirements RESPONSIBILITIES: Optimize and document manufacturing processes through the entire supply chain. These business processes include procurement to payables, production operations, inventory management, and shipping Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs, and changeovers. Interact with supervisors and workers to explore initiatives, ideas, and order progress. Develop innovative solutions. Research and purchase new manufacturing technology. Prepare samples for study. Improve process capability and production volume while maintaining and improving quality standards. Develop best practices to deliver process documentation using appropriate tools (web apps, apps, MS Tools, or through integration with ERP, etc.) Ensure that process documentation is user-friendly and accessible in English and Spanish. Support shipping operations on/off-season to ensure order completion Evaluate and improve processes in manufacturing systems. Develop and implement systems that optimize all phases of the production process. Work with equipment designers and manufacturing officers to develop a cost-effective and working production process. Ensure projects are completed on time. Ensure financial budgets are followed. Collect, record, and transcribe data. Work with the compliance team to ensure business processes are being adhered to. Manage cost and time constraints Perform risk assessments Additional Responsibilities Availability for flexible schedule changes based on business needs (including but not limited to seasonal demand and additional hours outside of the regular work schedule). Collaborate with cross-functional teams to gather information or help as required. Perform additional duties as required. QUALIFICATIONS: Bachelor's degree in engineering with a specialization in Industrial or Mechanical Engineering or equivalent experience. Experience in process improvement and project management is a plus. Strong understanding of manufacturing methods /procedures/ quality. Proficient in Microsoft Office Suite. (Excel, Visio, Power BI) Experience in process simulation Working knowledge of process engineering software packages Ability to present technical information using CAD, CAD/CAM Circuit Design Bilingual (English - Spanish) is a plus. Excellent written and verbal communication skills, with the ability to present complex data to diverse audiences. Physical Demands Exerting up to 20 pounds of force frequently and/or 50 pounds of force occasionally to lift, carry, push, pull, or otherwise move objects, Bending, reaching, stretching, standing, & walking in various settings or environments. Work Environment: The role involves utilizing standard office equipment, such as computers, monitors, keyboards, mice, telephones, and other essential digital tools required for daily tasks. Must be able to work in and around various settings, including office and outdoor agricultural facilities. Indoor duties may involve using computers and standard office equipment. Outdoor duties include work outdoors in fluctuating weather conditions, including exposure to sunlight, rain, wind, and temperature changes (hot, cold, rainy, windy). Tasks often involve manual labor or physical effort. The position also requires direct contact with various plants, soil, and shipping materials and exposure to various dust, noise, and weather conditions. SKILLS: Excellent communication and interpersonal skills with the ability to effectively communicate complex information to employees. Demonstrated ability to work well in a team-oriented environment. Superior organizational, self-motivation and problem-solving skills Ability to maintain confidentiality and handle sensitive information with discretion. Strong analytical and critical thinking abilities. Capable of identifying problems, evaluating options, and implementing practical solutions. Effective time management skills to complete tasks within deadlines and maintain productivity. Ability to work independently as well as collaboratively within a team environment. Ability to troubleshoot and resolve issues efficiently. Flexibility to adapt to changing priorities and work schedules as needed. COMPETENCIES: Action Oriented Collaborates Tech Savvy Cultivate Innovation All applicants must be work-authorized. Costa Farms will not sponsor any visa for this position. After applying, follow us on LinkedIn to stay up to date on what's happening around Costa Farms and to start becoming part of our family. Come Grow with Us™! Costa Farms offers competitive wages and benefits, including: 401(k) Plan Company 401(k) Matching Contributions Health Savings Account, Flexible Spending Account, and Dependent Care Telemedicine/ Mental Health Services Health Insurance Dental Insurance Vision Insurance Pet Insurance Supplemental Insurance (Aflac) Growth Opportunities Challenging and exciting work environment Costa Farms Scholarship Employee discounts on plants Costa Farms headquarters also has: On-site gym with showers Subsidized on-site cafeteria, a quiet room, and indoor games Love Where You Work activities throughout the year This organization participates in E-Verify

Who Are We? UniUni, a North American leader in last-mile logistics, delivers tens of millions of parcels annually across Canada, from coast to coast, and is rapidly expanding its footprint in the United States. Founded in 2019, UniUni is known for its tech-driven innovation and crowdsourced delivery model, providing fast, economical, and reliable services to local, national, and international e-commerce clients. What Do We Offer? At UniUni, we empower our employees with opportunities to achieve their professional goals. We value both lateral growth and vertical advancement, ensuring every role helps you develop your skills, broaden your expertise, and build a fulfilling career. We are looking for passionate professionals ready to work hard, embrace challenges, and enjoy being part of a dynamic, fun team. Role Overview We are seeking a hands-on and detail-oriented Logistics Process Engineer to oversee and execute operational network changes across a defined region in the U.S. This individual will be responsible for aligning local execution with corporate strategy, monitoring in-field operations, and ensuring timely and efficient rollout of changes. The ideal candidate is both analytically skilled and operationally grounded-capable of supporting execution while also evaluating performance, cost impact, and long-term effectiveness.

Lead the Future of Wastewater Treatment at a Premier Solutions Provider Compensation: Competitive $150,000 to $200,000 base salary + bonus + benefits including health, dental, vision and 401(k) Remote: This is a remote position with a mixture of daily or weekly travel to jobsites across the continental US. 360 Talent Avenue is partnering with a premier wastewater solutions company to hire a Process Engineer (Wastewater). This is a high-impact, technical role reporting to the Executive Vice President. The Process Engineer (Wastewater) demonstrates highly skilled hands-on experience and industry knowledge as part of a solutions focused team serving some of the most dynamic industries and clients in the country. This role is responsible for supporting system installations, startups, repairs, and maintenance of the wastewater treatment chemistry and equipment. This role will troubleshoot and solve complex problems, communicate to technical audiences, and recommend operational improvements. The Process Engineer (Wastewater) acts as a liaison between the team and client supporting client confidence and business expansion. Why You'll Love This Role: Technical Impact - Apply your expertise in wastewater chemistry and equipment to solve real-world challenges, improve efficiency, and drive measurable results. Client-Centric Focus - Partner with leading organizations across some of the most dynamic industries in the country, delivering solutions that ensure compliance, minimize costs, and maximize treatment performance. Solutions-Driven Team - Join a highly skilled, collaborative group that thrives on innovation and problem-solving. Growth & Flexibility - Benefit from remote work with travel, ongoing technical training, and clear opportunities for career advancement. Competitive Rewards - Earn a strong base salary plus eligibility for annual bonus. Comprehensive Benefits - Access health, dental, vision, retirement plans, and travel mileage reimbursement. Key Responsibilities Leverage knowledge of coagulants, polymers, and wastewater specialty chemicals to troubleshoot and provide field support for chemical treatment programs, equipment, and processes at industrial wastewater treatment plants. Maintain composure and professionalism while demonstrating urgency addressing complex situations, ensuring effective problem-solving and client confidence. Support site readiness preparation, and startup and ongoing monitoring. Prepare technical reports, recommendations and communicate verbally and in writing complex information to technical audiences of varying levels of expertise. Follow industry standards and best practices while remaining current in new technologies. Act as a liaison between the team and client supporting client confidence and business expansion. A Day in the Life Work at client site to evaluate wastewater treatment chemistry and processes. Communicate with the wastewater treatment team including Operators, Mechanic, and/or Lab Tech in addition to clients to better understand the issue. Evaluate data and use knowledge and skills to provide a best practice recommendation. Create a report documenting results. Continue to monitor and evaluate performance and recommend any follow up changes. What You Bring 5-7 years of technical service experience in industrial wastewater treatment including deep knowledge of specialty chemicals. Bachelor's degree in Chemistry, Environmental Science, Engineering, or related field preferred; equivalent industry experience considered. Experience with Dissolved Air Floatation Systems, Belt press, Centrifuge, clarification systems, Biological treatment both aerobic and anaerobic systems. Ability to build strong relationships across the team and client to gather information, collaborate on solutions, and provide recommendations. Strong problem-solving skills and ability to work independently and with a team at client sites. Excellent written and verbal communication skills with the ability to effectively translate complex information across audiences with varying levels of expertise. Proficiency in Microsoft Office and comfort with data tracking and analysis with demonstrated ability to produce professional service reports. Valid driver's license and willingness to travel regularly to customer facilities. Ability to lift up to 50 lbs and work in varying plant and weather conditions. Comfortable working in industrial environments and using appropriate PPE. All applicants must be able to complete pre-employment onboarding requirements which may include any/all of the following: background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. 360 Talent Avenue is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran, status or any other basis covered by appropriate law. All employment decisions are based on qualifications, merit, and business needs.

At ReturnPro, we are revolutionizing the way returns and refurbishments are handled. With decades of experience in reverse logistics and refurbishment, we have evolved into a mission-driven company dedicated to sustainability, innovation, and zero waste. Our expertise spans a wide range of product categories, including tools, electronics, appliances, and more, with the goal of repairing and repurposing every item we receive. As a leader in the refurbishment industry, ReturnPro is committed to creating scalable systems that maximize economic value while prioritizing environmental responsibility. Our mission is to redefine the lifecycle of returned products, transforming waste into opportunity and fostering a sustainable future. We are seeking a Process Improvement Engineer to join our growing team at our Miami, Florida headquarters or Dallas/Fort Worth and lead the charge in optimizing repair processes, training teams, and achieving our zero-waste vision. Repair Process Development: Design, implement, and optimize scalable repair systems for a wide range of products (tools, electronics, appliances, etc.), ensuring items can be refurbished effectively and returned to the market. Create comprehensive workflows that streamline repair tasks from intake to quality control. Develop innovative repair techniques for items of varying complexity, focusing on efficiency, durability, and cost-effectiveness. Cost-Benefit Analysis: Conduct detailed economic feasibility studies for repairs, ensuring that processes maximize profitability while maintaining quality and sustainability standards. Continuously analyze the ROI of repair operations and identify areas for improvement. Documentation and Training Systems: Develop clear, user-friendly documentation, standard operating procedures (SOPs), and training materials to guide team members with minimal prior experience. Build and maintain an organizational structure that empowers teams to perform repairs independently and effectively. Sustainability Advocacy: Champion ReturnPro' s mission of zero waste by driving repair-first practices and reducing the need for replacements. Integrate sustainable principles, such as lifecycle assessments and material reuse, into all aspects of the repair process. Technical Leadership: Provide expertise in material science, failure analysis, and repair techniques across multiple categories of products. Leverage advanced tools like CAD software, automation systems, and data analytics to enhance process efficiency and innovation. Drive the integration of technology, including robotics and custom tools, to improve precision and reduce turnaround time. Collaboration and Problem-Solving: Partner with cross-functional teams to identify bottlenecks in repair operations and implement solutions. Act as a mentor and trainer to team members, fostering a collaborative and innovative culture. Qualifications Degree in mechanical engineering or a related field. Proven experience in repair, refurbishment, or manufacturing process optimization. Strong understanding of repair techniques for tools, electronics, and appliances. Proficiency with CAD software (e.g., SolidWorks, AutoCAD, CATIA) and experience with prototyping and testing. Knowledge of lean manufacturing, Six Sigma, and other process improvement methodologies. Experience conducting cost-benefit analyses and ROI assessments for repair operations. Exceptional documentation and organizational skills, with the ability to translate complex processes into actionable steps for diverse teams. Passion for sustainability, zero waste, and environmentally conscious business practices. Excellent problem-solving skills, adaptability, and a results-driven mindset. Who You Are: You are a hands-on innovator who thrives on solving complex repair challenges. You are passionate about creating systems that empower teams and make sustainability an achievable reality. You believe in the power of repair to reduce waste and create economic value. You are excited to work in a fast-paced, mission-driven environment where your contributions directly impact the world.

Process Validation/Manufacturing Eng needs 1-3 years experience in a cGMP-regulated manufacturing environment or an equivalent combination of training and experience is required. Process Validation/Manufacturing Eng requires: Bachelor's degree in engineering or a related field of specialization. Industrial engineering is preferred, but not required. Process Validation Current Good Manufacturing Practices (cGMP), Food and Drug Administration (FDA), Drug Enforcement Agency (DEA), and other regulatory requirements. Speak and write fluent English with proficiency in technical writing for complex reports and regulatory documents Process Validation/Manufacturing Eng duties: Interpret specifications, standard operating procedures, and standard testing procedures Works as a member of a team to achieve all outcomes Recommends and monitors improvements in manufacturing and control systems including corrective and preventative actions (CAPA) Performs assessments/approvals of change controls related to production activities

About Our Client Our client, a leader in the fragrance industry, develops innovative, app -connected scenting solutions that transform everyday spaces. Their product line includes electronic diffusers, scented oils, body mists, and candles - all designed to blend form, function, and fragrance seamlessly. This fast -moving, innovation -driven team is redefining what's possible in IoT -connected scent technologies. Role Overview We are seeking a hands -on Electronics Engineer / Product Evaluator with a strong background in IoT product development. This role is ideal for someone who thrives in a fast -paced, collaborative environment and enjoys taking products from concept to performance -optimized reality. The position offers a hybrid schedule, with on -site work in Doral, FL for product testing, prototyping, and team collaboration, combined with remote flexibility for design, documentation, and analysis work. You'll be involved in reviewing and refining electronic designs, optimizing energy usage and component sizes, testing current products, and managing testing data - all while working closely with design and engineering teams to ensure products deliver exceptional customer experiences. Key Responsibilities Electronic Design & Optimization Review existing PCB and circuit designs with a focus on miniaturization, power efficiency, and cost -effectiveness. Recommend improvements to enhance performance and manufacturability. Design and prototype new electronic systems in collaboration with the Industrial Design and Engineering teams. Work with suppliers and manufacturers to validate components for production. Product Testing & Evaluation Plan and execute structured tests for components and full products. Measure and analyze performance metrics such as energy consumption, connectivity stability, and durability. Troubleshoot and recommend design improvements based on results. Documentation & Data Management Maintain accurate records of all test protocols, findings, and design changes using tools like Notion or Google Sheets. Develop clear internal documentation standards for ongoing product evaluations. Cross -functional Collaboration Partner with Industrial Design to integrate electronics seamlessly into product form factors. Coordinate with Software teams to validate electronic -software interactions in Bluetooth/Wi -Fi devices. Contribute insights during product reviews and development meetings. Requirements Bachelor's degree in Electrical Engineering, Mechatronics, or related field. 3-5 years of experience in IoT product development (consumer electronics preferred). Proficiency in PCB design, prototyping, and troubleshooting. Knowledge of low -power design and small form factor integration. Familiarity with BLE, Wi -Fi, microcontrollers, and power management. Ability to manage projects independently and communicate findings clearly. Preferred Traits Detail -oriented with strong documentation skills. Thrives in iterative, fast -paced development cycles. Proactive communicator and self -starter. Comfortable using Notion, Google Sheets, or similar platforms for project tracking. BenefitsJob Type & Pay Full -time, hybrid role based in Doral, FL $36.00 - $40.00/hour Expected hours: 40 per week Benefits: Paid time off Monday-Friday schedule, 8 -hour day shifts

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking a highly skilled Propulsion Manufacturing Engineer to support the design, assembly, integration, and testing of electric propulsion thrusters for Low Earth Orbit (LEO) satellite applications. The ideal candidate will have hands-on experience with propulsion system hardware, electrical and plasma thrusters, and production line processes to ensure reliable, repeatable, and high-quality manufacturing. Key Responsibilities Develop and maintain manufacturing processes for electric propulsion thrusters and subsystems, including assembly, bonding, welding, and integration. Support production line setup, tooling design, and workflow optimization to improve yield, cycle time, and throughput. Collaborate with design engineers to ensure manufacturability of propulsion system components and assemblies. Define and implement quality control procedures including ESD protection, contamination control, vacuum compatibility, and leak testing. Support the assembly, integration, and verification (AIV) of propulsion modules, including electrical connections, harness routing, and fluid/electrical interfaces. Troubleshoot and resolve issues related to plasma thrusters, ion engines, Hall-effect thrusters, and PPU integration. Conduct DFM/DFX reviews to enhance reliability and manufacturability. Develop detailed work instructions, assembly documentation, and test procedures for technicians and operators. Participate in qualification and acceptance testing, including vibration, thermal vacuum (TVAC), and functional testing of thruster subsystems. Drive continuous improvement initiatives for cost reduction, process automation, and scalability for satellite constellations. Qualifications Bachelor's or Master's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field. Hands-on experience with electric propulsion systems (Hall thrusters, ion thrusters, or similar plasma propulsion technologies). Familiarity with vacuum chamber operations, leak detection methods, and contamination control. Experience with satellite manufacturing standards (ECSS, NASA, IPC, or equivalent). Strong knowledge of electrical integration, power processing units (PPUs), and harnessing in propulsion systems. Proficiency in CAD software (CATIA, NX, SolidWorks, or similar) for design-for-manufacturing activities. Knowledge of manufacturing processes such as precision machining, brazing, welding, additive manufacturing, and surface treatments. Strong problem-solving, documentation, and cross-disciplinary collaboration skills. Experience in cleanroom and ESD-controlled environments is highly desirable. Preferred Skills Previous experience in LEO satellite propulsion integration. Familiarity with thruster lifetime testing and endurance campaigns. Understanding of propellant systems (Xenon, Krypton, or alternative propellants). Knowledge of automation and digital manufacturing tools. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands . AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

RAS LaVrar is a rapidly expanding creditors' rights law firm servicing some of the largest financial institutions in the country. Our offices, home to hundreds of employees across seven states, work diligently to ensure our interests are in constant alignment with those of our clients. Our firm maintains a collegial work environment with opportunities for training and professional development. This is a high-volume and fast-paced practice that prides itself on efficiency and innovation. POSITION SUMMARY Process Engineers at RAS LaVrar work closely with Software Developers to streamline and standardize the firm's processes. Process Engineers are involved in the design, construction, and implementation of all aspects of the firm's processes. As such, Process Engineers are expected to develop an understanding of the firm's processes that extends beyond the programming details to include integration with non-technical elements. Responsibilities and Duties: The following responsibilities are central to the role: Craft processes Build roadmaps which include automations and applications to be developed by software developers as well as procedures to be executed by staff. Learn the firm's case management system (CMS) and construct automated process flows using the user interface therein. Develop an understanding of firm processes Build and maintain process documentation. Ascertain the purpose of firm processes in addition to their functionality. Data Engineering Build & maintain data pipelines. Construct queries using programming languages such as SQL & Python. Core Competencies & Required Skills: Candidates who succeed in this position typically: Are results-oriented. Pay close attention to detail. Display comfort and sensibility when working in a high-volume, fast-paced environment. Beat deadlines. Exhibit time-management skills/ability to work on multiple projects simultaneously. Take pride in the ability to work independently and problem solve. Demonstrate excellent verbal and written communication skills, including phone and email etiquette. Possess foundational computer knowledge and skills including familiarity with programs within the Microsoft Office Suite as well as programming languages such as SQL, Python. Educational/Experience Qualification: Bachelor's Degree or higher preferred. Individuals who excel in this role typically have academic backgrounds in operations management, engineering, and/or data science. Working Conditions: Onsite Position - Plantation, Florida Operates no tools, machines or equipment No significant lifting Benefits: Paid time off Paid holidays 401K Plan Medical, dental, vision and supplemental health insurance plans Voluntary life insurance plan Work Environment Mondays to Fridays Office Located in Plantation, FL Position: On site role Shift options to choose from 8:00 am to 5:00 pm 8:30 am to 5:30 pm 9:00 am to 6:00 pm RAS is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to race, color, age, national origin, religion, marital status, sex, sexual orientation, gender identity, gender expression, genetics, disability, protected veteran status or any other basis prohibited by law. We are committed to a diverse and inclusive workplace.

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

AV is seeking a dynamic and skilled Digital Signal Processing (DSP) Engineer with FPGA experience to join our growing team in Sunrise, Florida. This is an exciting opportunity to work on advanced technologies that shape the future of defense and communications systems. As a key technical contributor, you'll develop innovative DSP architectures and algorithms, integrate solutions into real-time embedded systems, and serve as a Subject-Matter Expert (SME) across multiple platforms. Primary Responsibilities Include: * Design, simulate, and implement moderate to complex digital signal processing modules using tools like MATLAB, Simulink, and VHDL/Verilog for FPGA platforms. * Collaborate with cross-functional teams - including hardware engineers, software developers, and system architects - to develop and integrate DSP solutions. * Receive and interpret technical instruction for defined project goals and collaborate on broader system designs. * Participate in meetings and communications with customers and partners to support project requirements and ensure deliverables are aligned with expectations. * Apply modern DSP techniques, algorithms, and methodologies to enhance existing architectures and develop cutting-edge solutions. * Contribute to complex problem-solving through hands-on development and team brainstorming. Required Qualifications: * Bachelor's Degree in Electrical Engineering (or related field) and 6+ years of prior relevant experience or Master's Degree and 4+ years of prior relevant experience. * Ability to obtain and maintain a US Government Security Clearance. DSP Qualifications: * Proficiency in Intermediate Digital Signal Processing Algorithms. * Solid understanding of DSP concepts such as filtering, FFT, and sampling theory. * Proficiency in Communications theory. * Some Proficiency in programming languages preferably C or C++. FPGA Qualifications: * Strong interest in FPGA development and low-resource digital design techniques. * Experience with RTL design in VHDL simulation tools, and synthesis flows. * Familiarity with FPGA platforms (e.g., Xilinx, Microchip) and embedded system development is a plus. Preferred Technical Competencies: * Software Defined Radios * Digital Signal Processing Theory * Signal Processing Algorithms: e.g., Rate conversion, Correlation and Filtering * C, C++ Programming: Object Oriented Design * DSP Algorithms using MATLAB/Simulink: Develop and pick up MATLAB models for bit exact design verification; May use SIMULINK (system generator) as an interim step. * DSP and FPGA Code Optimization * Modem Design (SATCOM, wireless, Cellular & SDR) * Physical Layers e.g. GSM, Wi-Max, Wi-Fi, Bluetooth * Real Time Debugging * Signal Impairments Testing, BER Testing: Modem Qualification experience. * Design Documentation * Performance Verification and Validation * Software/Hardware implementation collaboration * System Requirements Analysis * TFS, GIT Revision Control Tools Clearance Level No Clearance The salary range for this role is: AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Job purpose The Process Engineer I is responsible for evaluating and improving manufacturing processes to reduce cost, improve yields, and reduce variation. This position performs new process design and implementation, process validations and process qualifications. Process Engineers also participate in technology transfer to ensure the processes necessary for new products are effectively translated to manufacturing from R&D. Process Engineer I makes use of statistical analysis methods, critical thinking, process development, and scaling principles to achieve the objectives mentioned above. Duties and responsibilities Plan and execute process optimization, equipment qualification, and process validation or process qualification projects. Use LEAN Manufacturing principles to analyze processes and make recommendations for improvements. Lead and perform equipment qualifications, process validations or process qualifications, including writing of protocols and reports. Lead efforts to solve problems using formal problem resolution techniques and root cause analysis. Create, communicate, and follow project plans with detailed tasks and timelines necessary for project completion. Communicate to management of performance against plan. Identify and resolve insufficiencies in routine manufacturing and provide constant support to manufacturing team. Develop standard operating procedures (SOPs) for newly designed or optimized processes, while ensuring compliance with safety and quality standards. Assess processes, take measurements, and interpret data. Develop and monitor process and equipment metrics to use for optimization analysis. Comply with FDA and AATB tissue banking standards. Other duties as assigned. Requirements Qualifications Qualifications include: BS in Biomedical, Mechanical or Industrial Engineering or other applicable engineering discipline. Advanced degree (Master's) a plus. 1-3 years of experience in Tissue Banking, Device, Biologics, or Pharmaceutical industry in a relevant engineering role preferred. Strong analytical, planning, project management, critical thinking, troubleshooting, clear communication, and problem-solving skills. Ability to effectively communicate with multidisciplinary teams. Excellent technical skills and writing. Strong knowledge of LEAN manufacturing principles preferred. Working knowledge of 21 CFR 1271 regulations and AATB guidelines preferred. Proficient in project planning software. Microsoft Project preferred. CTBS certified (or certified within two years of employment). Strong work ethics. Working conditions Job requires working in office. Must be willing to work weekends and evening hours as necessary. Must be willing to accommodate travel if necessary. The job may require work to be performed inside the controlled clean room processing area where the engineer would be exposed to tissue processing. Physical requirements The job may entail the occasional requirement to stand for extended periods of time and lifting heavy objects of up to 30 lbs. and do repetitive tasks with few breaks while executing engineering plans. Direct reports No direct reports