Arconic jobs in Visalia, CA

BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Schedule: Monday - Friday 2:30am 6am start time May occasionally have an over night shift Our delivery drivers start at $31.23 hour. After completion of probation period, wage increases to $33.73 hour! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.23 and $33.73 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.

Troy Center is hiring an in-person MDS Coordinator in Troy, NY. Completing accurate assessments, MDS & care plans as assigned Initiating care plans and supporting activities as assigned Creating and distributing monthly care plan calendars in a timely fashion Maintaining & updating all care plans and assessments as required Monitoring & auditing clinical records, ensuring accuracy & timeliness Informing DON of persistent issues related to non-compliant documentation Protecting the confidentiality of Resident & Facility information at all times REQUIREMENTS: MUST HAVE PRIOR MDS 3.0 EXPERIENCE Valid New York RN License Long Term Care Experience Required! Must be highly organized, professional & motivated Should have solid computer skills Excellent communication skills Should be friendly and a team worker About us: Troy Center for Rehabilitation and Nursing is an 80-bed rehabilitation and skilled nursing facility located in the South Troy section of the city, minutes away from the eastern bank of the Hudson River. It's a homey, welcoming, well-maintained facility, providing a warm and nurturing environment. Our staff is committed to ensuring the highest quality of life for all our residents, helping each to get stronger, healthier, and happier. We want all residents to leave Troy Center with dignity and independence. Troy Center is a proud member of the Centers Health Care Consortium. Equal Opportunity Employer -M/F/D/V

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Purpose and Impact The General Laborer I, will perform routine and repetitive physical production and warehouse responsibilities following established policies and procedures with frequent guidance. In this role, you will support production operations while following all food safety and regulatory polices as required. Job Location: Harrisonburg, VA Job Type: Full Time Shift(s) Available: 1st (6AM-6PM); hours may vary depending on business needs Compensation:$20.29/hr Benefits Information • Medical, Dental, Vision, and Prescription Drug Insurance • Health and Wellness Incentives • Marathon Health Clinic (Employer sponsored health center) • Paid Vacation and Holidays • 401(k) with Cargill matching contributions • Flexible Spending Accounts (FSAs) • Short-Term Disability and Life Insurance • Employee Assistance Program (EAP) • Career Development and Tuition Reimbursement • Employee Discounts Principal Accountabilities Perform repetitive tasks. Examples include: • Properly administering and completing the vaccinations based on the Breeder Managers vaccine protocol, and other duties as assigned. • Follow all Cargill safety, ergo, and departmental policies. • As is live production, weekend work may be required, and start/stop times will vary based on the needs of the live production facility they will be at. Required Qualifications • Must be eligible to work in the United States without visa sponsorship • Must be 18 years or older • Ability to read, write, and speak English • Ability to work in a hot to cold indoor/ outdoor environment • Must be willing to work flexible hours and work some weekends to cover other shifts Preferred Qualifications • Previous production/feed mill experience • Previous Cargill experience • Work history in the past 12 months Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26773 Job Responsibilities We are seeking a highly skilled Senior CMM Programmer to join our innovative manufacturing team. In this pivotal role, you will be instrumental in developing and optimizing complex coordinate measuring machine (CMM) programs to ensure precision and quality in our manufacturing processes. You will leverage your extensive expertise in metrology to drive product excellence and contribute to our mission of delivering top-tier solutions. In addition to performing the calibration of the coordinate measuring machine, you will also use precise measurement tools, such as calipers and micrometers, to ensure our products meet our customer and internal standards. Applicants need to be able to read blueprints and interpret GD&T (geometric dimensioning and tolerancing) symbols, so some technical training or professional experience is preferred. What You Will Do Interpret internal and customer engineering drawings to determine inspection requirements. Create and edit CMM programs to support part inspection and validation. Perform CMM setups, including managing multiple setups simultaneously and optimizing table space. Select appropriate measuring instruments based on blueprint specifications. Execute dimensional inspections using CMM programs and manual measurement tools. Apply GD&T principles to conduct detailed part inspections. Ensure inspection programs align with part numbers and revision levels. Complete dimensional reports for PPAP and AS9102 submissions. Conduct first article, in-process, and final inspections using hand gauges and measurement systems. Perform incoming goods inspections as needed. Accurately log and maintain inspection data for traceability and reporting. Support and uphold AS9100 quality objectives and procedures. Identify and segregate non-conforming parts, ensuring proper labeling and documentation. Maintain high standards of workmanship using only approved data, materials, and tools. Problem-Solving & Communication Skills Use analytical skills to identify product issues, determine root causes, and implement corrective actions. Troubleshoot defects and verify the effectiveness of repairs. Proactively address production delays by identifying causes and proposing preventive solutions. Communicate inspection findings clearly to team members and management. Collaborate effectively within cross-functional teams to support continuous improvement. Education and Experience Required High school diploma/GED, prior certification as a PC-DMIS CMM Programmer, OR equivalent work experience. 3+ years of relevant experience. Proven experience in CMM programming (PC-DMIS and/or Verisurf). Strong understanding of metrology and dimensional inspection techniques. Ability to read and interpret blueprints and GD&T symbols. Technical training or equivalent professional experience in a manufacturing or quality control environment. Experience with flight hardware is a must. Working knowledge of AS9100, AS9102, AS13100, ISO 9001, and other relevant quality standards. Must have strong computer skills, including Microsoft Office and databases. Ability to work independently and manage multiple priorities. Job Requirements PHYSICAL DEMANDS The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. EXPORT CONTROL DISCLAIMER This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals as whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. ATTENTION: THIRD-PARTY RECRUITERS Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26071 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Determine the best method to manage and complete a project by a designated due date. • Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. • Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. • List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. • Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. • Coordinate work assigned through various auxiliary work centers and equipment as required • Occasionally assist operators and maintenance with machine or processing issues. • Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. • Effectively communicate with other personnel and educate apprentices in best practices. • Adhere to all written specifications and ensure compliance with all standards. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: • Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. • Must pass the skilled trades assessment test for this position • Proficiently operate all common machining equipment, mills, lathes, grinders, etc. • Work as a team lead as well as a team member depending on the departmental workload. • Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Time management skills and the ability to work to deadlines in a fast-paced environment. • Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. • Work from design prints, sketches, sample parts and oral instructions. • Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. • Personally possess basic inspection and machining tools to effectively perform job. • Available to work second shift, overtime and weekends as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Company: US3090 Sygma Illinois (The Sygma Network, Inc) Sales Territory: None Zip Code: 61834 Travel Percentage: 0 Compensation Range: $10.00 - $48.00 The compensation range provided is in compliance with state specific laws. Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors. You may be eligible to participate in the Company's Incentive Plan. BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* Are you looking for a place to call home? Stability? A Career? Come join the SYGMA Danville, IL Team and get paid what you're worth. Our Delivery Drivers run 2-4 routes per week, and average $94-97K per year. At SYGMA we value our people and take pride in offering our customers the best service in the industry. We place an emphasis on teamwork and are known for developing our top internal talent. Offering Paid Training and Top Earning potential. Our Formula to Success is simple Route Pay + Bonuses = SYGMA Top Dollars. JOB SUMMARY To serve our customers by safely and efficiently transporting products from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading products according to customer invoices and company standards. Top Earners Make Up to $180,000! Highly Maintained Equipment - all automatics 10 Paid Holidays! Medical, Dental and Vision Insurance Benefits active on the 1st of the month after 31 days of employment. 401k and Sysco Stock Purchase Plan Drive both team and single routes Evening Dispatch, Sunday - Friday The More You Drive; The More You Earn! RESPONSIBILITIES: Unloads product from trailer, by hand or using a hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g., handling product according to preferred work methods, scanning product as it is delivered into the store). Ensures all paperwork is completed according to established company and governmental guidelines (e.g., DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre- and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly). Ensures all food safety protocols are met according to established guidelines (e.g., proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard. Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE: High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: Valid Class A Commercial Driver's License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering products. Ability to: drive a tractor-trailer unit both in the day and at night, remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart Perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. Ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit, talk, and hear. The associate is frequently required to lift, push, or move product that weighs up to 50 pounds by hand and push/pull up to 250 pounds of product with a 2-wheeled hand cart down a ramp and into the customer's storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required to successfully meet customers' needs. The associate is occasionally exposed to high, precarious places, fumes, or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required to successfully meet customers' needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This supersedes prior s. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* HOW WE PROTECT OUR ASSOCIATES COVID-19 Precaution(s): Personal protective equipment and masks provided Temperature screenings Social distancing guidelines in place Sanitizing, disinfecting, and cleaning procedures in place OVERVIEW: Sysco is the global leader in foodservice distribution. With over 57,000 associates and a fleet of over 13,000 vehicles, Sysco operates approximately 326 distribution facilities worldwide and serves more than 625,000 customer locations. We offer our associates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates. OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

HIRING FOR DAY SHIFT AND NIGHT SHIFT, 12 HOUR ROTATING SHIFTS. Work with a team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. Maintain cleanliness of maintenance shop. Follow proper lock-out/tag-out procedures. Assist to ensure adherance to all company, state and federal regulations. All other relevant duties to the job. Manufacturing equipment repair experience required. Ability to replace basic component parts on equipment. Mechanical diagnostics and repair experience. Knowledge of wire belt and plastic conveyor repairs, and sprocket alignment and installation.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: Performs repairs and replacements for our commercial HVAC customers. Primarily responsible for performing installs, repairs and maintenance to a variety of equipment including: refrigeration, air conditioning, electric motors, heating units, heat pumps, hermetic compressors, light commercial furnaces, boilers, burners, intake and exhaust fans, economizers, humidifiers, capacity controls, semi-hermetic compressors, split systems, flame safeguard controls, air compressors, air driers, and packaged units. Education and Experience: Universal EPA Certification (recommended) 3+ years of Commercial HVAC experience preferred High school diploma or equivalent preferred Skills and Abilities: Must have excellent written communications skills Must possess excellent time management skills Must have excellent oral communications skills Must have the ability to juggle multiple tasks Must be able to deal with difficult people Must have excellent organizational skills Must be able to work well with other technicians and trade professionals Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27825 Job Responsibilities Position Summary: Assist Electrical Project Engineers and Designers in completing their assigned tasks. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Focus on design and development. Position responsibilities: • Component and/or schematic drawing creation. • Assist in creating and assembling Service Manuals. • Revising and updating of drawings. • Provide technical assistance to Estimating, Sales, Production and Service as required. • Provide assistance to other departments (Service, Shop, etc.) as required. • Work well with Machine Builders/Electricians, Management, and support functions. Job Requirements Essential skills and experience: • High School Degree or GED or attending skills trade school. • Pursuing a Technical or Bachelor Degree • Commitment to company values • Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential skills and experience: • Safety (OSHA STDS) Environmental, Health & Safety (EH&S) • Understand the Company's EHS Policy and how it relates to this job. • Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Work in a safe and environmentally friendly manner and observe all company EHS procedures. • Know that the company EHS procedures are located on the ISO drive. • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. • Attend required EHS training Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Arconic is currently in search of Human Resources Intern to join our Kawneer Team based in Visalia. At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization. Job Summary: This HR Intern role is responsible with providing administrative support to the HR Manager by assisting with recruiting, office duties, and special projects.