Assembly line worker jobs in Albany, NY - 29 jobs

Basic Qualifications General Dynamics Mission Systems (GDMS), a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to our customers. Key Responsibilities DUTIES AND RESPONSIBILITIES: (Include the following, but are not limited to) •Computer skills: Ability to operate various computer programs related to their position for time recording, access to shop planning and business instructions. •Read, interpret and work to; drawings, schematics, wiring lists and diagrams, work instructions, sketches, travelers, planning and verbal directions. •Perform related duties as required and have the ability to perform all duties of R-16 Job Classification. •Set up and maintain work station and related materials, includes set up of solder and cleaning stations, control of age controlled items and hazardous materials and consumables. •Perform material identification and paint touch up. •May give work direction/training to other employees as assigned. •May perform verification of other employees work. •Must be able to obtain other certificates, licenses and registrations required for their positions as defined in the qualifications below. •Maintain the work area and perform duties in a safe manner. SUPERVISORY RESPONSIBILITY: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or ability required. Education and/or Experience: High school diploma or general education degree (GED) required. Related experience and or training are desirable. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratios, percent and interpret graphs. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively with other employees of the organization. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Ability to question instructions when they are unclear. Certificates, Licenses, Registrations •Fork Truck Certification. •ESD Handling Certification. •Work Saver Usage Training. •Crane Operator Training. •Hazardous Material Handling and Shipping Training. •Security Clearance when required. •Solder and wire certification including visual acuity and color perception tests. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to stand; walk; and stoop, kneel, crouch, or crawl; and climb stairs and / or to use hands to finger, handle and feel; reach with hands and arms; climb and balance; and talk and hear for 8 hours a day. The employee must be able to lift and/or move up to 10 Responsibilities for this Position Job Requirements Education and/or Experience High school diploma or general education degree (GED) required. Related experience and or training are desirable. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $27.03 - USD $27.03 /Hr. Company Overview At General Dynamics Mission Systems, we rise to the challenge each day to ensure the safety of those that lead, serve, and protect the world we live in. We do this by making the world's most advanced defense platforms even smarter. Our engineers redefine what's possible and our manufacturing team brings it to life, building the brains behind the brawn on submarines, ships, combat vehicles, aircraft, satellites, and other advanced systems. We pride ourselves in being a great place to work with this shared sense of purpose, committed to a diverse and exciting employee experience that drives innovation and creates a community where all feel welcome and a part of something amazing. We offer highly competitive benefits and a flexible work environment where contributions are recognized and rewarded. To see more about our benefits, visit ************************************************************* Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 03/27/2026. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $15.00 to $16.00 per hour, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Full-time Description PVA is hiring Assembly Technicians to join our growing team in robotic automation. We are a five-time Albany Business Review Best Places to Work and Healthiest Employer award winner, recognized for combining cutting-edge technology with a strong, supportive culture. If you're ready to take the first step in your manufacturing career, we would love to connect. Job Description: The Assembly Technician is responsible for starting the manufacturing process utilizing hand tools for robotic equipment per instructions and guide books. This position ensures that product is assembled correctly and shipped on time. There are many opportunities for growth and advancement! Job Details: 7:00 am - 3:30 pm Monday-Friday (1st shift) Starting pay $16.00 - $22.00 per hour depending on experience Onsite in Halfmoon, NY Requirements Job Responsibilities: Reads and interprets electrical drawings and schematics for their value stream. Attaches sheet metal sides to pre-assembled frames and installs motion components (gantry). Ensures that goals and expectations are met, and product is being developed on schedule Ensures equipment is in optimum working order and brings issues to supervisors' attention within one hour when aware of machine interruption. Maintains confidentiality of customer information, 100% of the time. Keeps a neat and organized work station for safety and efficiency, 100% of the time Forms strong working relationships within team and treats each other with respect. Corresponds with departments, and team through face-to-face meetings. Skills: Basic knowledge and ability to use hand tools. Understanding of electrical and mechanical concepts. Strong verbal communication and listening skills; ensures that information is passed on to others who should be kept informed. Well organized, analytical, and detail oriented. Ability to work most of the day on your feet in a fast-paced team environment. Maintains a calm, tactful demeanor when dealing with difficult situations. Manages multiple projects and timelines with a sense of urgency and follow through. Follows direction with focused attention. Job Location: PVA Global Headquarters | Halfmoon, NY PVA provides competitive salaries with a rich benefits package including medical, dental, and vision insurance; free onsite health center; employer paid Life, AD&D, and long-term disability insurance; employee assistance program; paid holidays, vacation, and sick time; paid parental leave; 401k savings with company match; new employee mentorship program. PVA is committed to complying with all applicable federal, state, and local laws that prohibit discrimination on the basis of race (including traits historically associated with race), color, national origin, citizenship or immigration status, age, religion, creed, sex (including pregnancy), sexual orientation, gender identity or expression, the status of being transgender, disability (including pregnancy related conditions), genetic information, predisposition and carrier status, military or veteran status, marital and familial status, domestic violence victim status, reproductive health decision making, prior convictions or arrests, known relationship or association with any member of a protected class, or any other characteristic protected by applicable law. Salary Description $16 - $22 per hour

Join our team as an Electrical Assembler where you will play a crucial role in assembling and inspecting electronic components for railway systems. This position offers the opportunity to work in a clean and organized environment, ensuring high-quality assembly with a focus on precision and attention to detail. **Responsibilities** + Read and interpret blueprints and schematics to accurately assemble electronic components. + Utilize fine motor skills and small tools to perform precise assembly tasks. + Work collaboratively at the start of the assembly process, passing completed products to the next station for further processing. + Complete four weeks of basic training with a team member and receive peer assessments on all work. **Essential Skills** + Ability to read and comprehend schematics. + Proficiency in using fine tools, hand tools, and power tools including micrometers and calipers. + Experience with electrical assembly and inspection. + Capability to use a mechanical torque wrench. + Comfortable with bi-weekly pay schedule. **Additional Skills & Qualifications** + High school diploma or equivalent. + Mechanical aptitude and experience with mechanical assembly. + Skills in soldering, blueprint reading, and crimping. + Strong eye for detail and ability to handle small objects for extended periods. **Work Environment** You will work in a very clean and organized environment, specializing in the design and manufacture of auxiliary power converters and on-board systems for railway cars. The dress code includes steel-toed shoes and work pants, with layers recommended for outdoor activities during fall/winter. The work shift is from Monday to Friday, 7:00 am to 3:30 pm. **Job Type & Location** This is a Contract to Hire position based out of Saratoga Springs, NY. **Pay and Benefits** The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Saratoga Springs,NY. **Application Deadline** This position is anticipated to close on Jan 21, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Manufacturing / Assembly Technician 📍 Near Troy, New York 💰 Pay Rate: Up to $20/hour 🕒 Full-Time | Monday-Friday, 7:00 AM - 3:30 PM (Overtime as needed) A well-established manufacturer is seeking a dependable Production Assembler to support the production of heavy-duty equipment used in municipal, industrial, and infrastructure applications. This is a full-time, onsite role for someone who enjoys hands-on work, precision assembly, and being part of a collaborative shop-floor team. Position Overview: The Assembly Technician is responsible for building high-quality fabricated components and finished units according to technical specifications and production schedules. This role supports products engineered to perform in demanding environments and requires a strong focus on safety, quality, and teamwork. Key Responsibilities: Assemble subcomponents and finished units following established work instructions Install seals, gaskets, and sealants according to drawings and specifications Read and interpret blueprints, 2D CAD drawings, and technical documentation Perform minor fitting and alignment using jigs, fixtures, and templates Use hand and power tools to complete assembly tasks Prepare materials through grinding, cleaning, and surface preparation Perform product touch-ups to ensure quality standards prior to shipment Maintain a clean, safe, and organized work area Perform basic tool and equipment maintenance Move materials and finished products using forklifts and pallet jacks Assist with special projects and additional tasks as assigned Skills & Qualifications: At least 18 years of age High school diploma or equivalent (technical training preferred) Minimum of 1 year of experience in assembly, fabrication, or manufacturing Ability to read and interpret technical drawings and measurements Proficiency with measuring tools and basic shop math Experience using common hand and power tools Forklift experience preferred Basic computer skills, including Microsoft Office Ability to stand, bend, and lift up to 50 lbs repeatedly Comfortable working in varying indoor and outdoor conditions Commitment to safety procedures and required PPE Ability to work independently and as part of a team To see a full listing of all our open positions, please visit: ****************************************************** red Shift Recruiting is the region's premier recruiting agency with over 100 years of combined experience in the recruiting field. We specialize in permanent, temporary, and temp-to-hire positions. Our superior service combined with our highly qualified and carefully selected bank of candidates sets us apart.

works in the 2 nd Ops division that further assembles product, cut to length and various other finishing of products. This position is for 2nd shift (Monday - Friday, 3:00 pm - 11:30 pm). Essential Duties and Responsibilities End finish operations Read DPR / determine quantity required Standard packaging label (spec #40001) Complete DPR paperwork (spec#00005 & 00006) Collection of products Report processing difficulties to supervisor (or designate) Various cut to length operations Use of weigh count scales Miscellaneous in-process product inspection Testing of products General housekeeping and sanitation General maintenance activities Dimensional measurement of extruded tubing Visual inspection of extruded tubing Other duties as assigned Qualifications Qualifications High School Diploma or equivalent Legible handwriting 1+ years of on-the-job experience in medical device manufacturer or component manufacturer Able to perform repetitive tasks for a minimum of 8 hours each workday Hand dexterity is essential, as small parts need to be assembled Good eye-hand coordination is required Able to use, but not limited to, pin gauges, ruler, tape measure, and caliper Worker should be able to meet known targets Able to work independently or in a team Able to maintain accurate records Physical Demands Continual lifting up to 50 lb, gripping, turning, finger dexterity, and hand /eye coordination is required throughout the shift. Long hours: 8 + hour shifts, mostly standing occasionally rotating into a sitting position. Position requires good vision to inspect product for quality. Must be able to distinguish colors for some positions. Must be able to wear protective eyewear. Work Environment Exposure to noise is present. Safety equipment such as protective eyewear is required, however hearing protection is optional and both are provided by the company. Manufacturing, warehouse and clean room environments

Core Tech manufactures mechanical, electrical, and fire suppression systems for the Electric Power Industry. Our customers are global companies - GE, Mitsubishi, Caterpillar, Woodward, and Emerson. Job Description Job Summary Assemble or fabricate steel structures, mechanical parts, pieces or products using a variety of tools and equipment according to the required specifications outlined in blueprints throughout various areas of production in a manufacturing organization. Responsibilities and Duties • Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written / verbal instructions or procedures to accurately assemble products. • Identify product defects and complete appropriate documentation when defects are identified • Must be able to measure and layout component locations or holes using a ruler, level and or square. • Utilize hand-held tools such as a cordless screw gun, drills, power saws, grinders, etc. • Cutout holes for components within enclosure using punches, drills and or saws. • Be proficient in the use of common hand tools to prepare and assemble components. • Possess a mechanical aptitude, do light fabrication, bolting, caulking, bending, squaring and leveling. • Maintain inventory and organization of tools being used within assigned work area. • Assemble equipment and products according to engineering specifications and or changes. • Perform all work in accordance with outlined quality standards and established safety procedures • Maintain a clean and safe work area Minimum Qualifications • High School Diploma or GED • Must be able to read a ruler • Must be able to lift up to 70 lbs. • Mechanical assembly experience is required or previous experience in the Construction Field. • Basic reading skills also must be able to follow verbal directions • Ability to perform work safely, accurately and thoroughly with a level of detail. • Excellent communication skills, organizational abilities and work ethic • Ability to work well as part of a team Physical Requirements Standing, walking, lifting, pulling and pushing, carrying, grasping, reaching, stooping and crouching, color determination, near acuity, speaking, listening Work Environment This work position is required to work in a light manufacturing environment facility. Hours are 7:00 am to 3:30 pm Monday through Friday, lunch is 1/2 hour, 12- 12:30pm Qualifications Minimum Qualifications • High School Diploma or GED • Must be able to read a ruler • Must be able to lift up to 70 lbs. • Mechanical assembly experience is required or previous experience in the Construction Field. • Basic reading skills also must be able to follow verbal directions • Ability to perform work safely, accurately and thoroughly with a level of detail. • Excellent communication skills, organizational abilities and work ethic • Ability to work well as part of a team Physical Requirements Standing, walking, lifting, pulling and pushing, carrying, grasping, reaching, stooping and crouching, color determination, near acuity, speaking, listening Additional Information Work Environment This work position is required to work in a light manufacturing environment facility. Hours are 7:00 am to 3:30 pm Monday through Friday, lunch is 1/2 hour, 12- 12:30pm.

Our Fiber Lab is searching for an entry level Fiber Optic Cable Assembler to join our growing team. All fiber cable assembly technicians are trained on site in basic fiber optic theory, termination and cable processing tasks and procedures. KEY RESPONSIBILITIES OF A Fiber Optic Cable Assembler: Creating high quality products in a timely manner. Assemblers are required to take ownership of their work and provide mechanical inspection and basic continuity testing before submitting work for final test and approval. Employees are required to demonstrate knowledge and experience in detailed oriented jobs; and accuracy with numbers and part numbers. Communicate effectively with team leader to continuously establish and improve quality on the assembly line. Polished work should be complete and free of any microscopic contamination, residual glue, process slurry, and diamond particles from lapping films. REQUIRED SKILLS & EXPERIENCE OF A Fiber Optic Cable Assembler: Ability to read and understand internal procedures and policies Ability to understand and follow through on both verbal and written instructions. Team oriented with a continuous improvement outlook. Able to communicate courteously and professionally at all organizational levels Mechanically proficient Possess solid math, time management, and computer skills Work in an environment that is a casual clean room Regularly required to work near moving mechanical parts on cable reeler Able to move and/or lift up to 75 lbs - instruction required on safe lifting practices Frequently required to walk, sit, use hands and hand tools Employees are expected to use provided hand tools, fiber processing equipment and detailed assembly procedures / instructions State of the art manufacturing equipment Position Type/Hours: EOE Job Type: Full-time Hours: Mon - Fri, 7:30am-4:00pm Starting Pay: $19.00 - $23.00 In addition to an exciting and collaborative workplace, we also offer outstanding benefits including medical/dental, vision, life insurance, paid time off, an employee stock ownership program (ESOP), 401K, Profit Sharing Bonus and the opportunity to shine in a successful, 30+ year customer and community minded company. *This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Hours: Monday through Friday 7:30am-4:00pm Full Time - 40hours a week

Our Fiber Lab is searching for an entry level Fiber Optic Cable Assembler to join our growing team. All fiber cable assembly technicians are trained on site in basic fiber optic theory, termination and cable processing tasks and procedures. KEY RESPONSIBILITIES OF A Fiber Optic Cable Assembler: Creating high quality products in a timely manner. Assemblers are required to take ownership of their work and provide mechanical inspection and basic continuity testing before submitting work for final test and approval. Employees are required to demonstrate knowledge and experience in detailed oriented jobs; and accuracy with numbers and part numbers. Communicate effectively with team leader to continuously establish and improve quality on the assembly line. Polished work should be complete and free of any microscopic contamination, residual glue, process slurry, and diamond particles from lapping films. REQUIRED SKILLS & EXPERIENCE OF A Fiber Optic Cable Assembler: Ability to read and understand internal procedures and policies Ability to understand and follow through on both verbal and written instructions. Team oriented with a continuous improvement outlook. Able to communicate courteously and professionally at all organizational levels Mechanically proficient Possess solid math, time management, and computer skills Work in an environment that is a casual clean room Regularly required to work near moving mechanical parts on cable reeler Able to move and/or lift up to 75 lbs - instruction required on safe lifting practices Frequently required to walk, sit, use hands and hand tools Employees are expected to use provided hand tools, fiber processing equipment and detailed assembly procedures / instructions State of the art manufacturing equipment Position Type/Hours: EOE Job Type: Full-time Hours: Mon - Fri, 7:30am-4:00pm Starting Pay: $19.00 - $23.00 In addition to an exciting and collaborative workplace, we also offer outstanding benefits including medical/dental, vision, life insurance, paid time off, an employee stock ownership program (ESOP), 401K, Profit Sharing Bonus and the opportunity to shine in a successful, 30+ year customer and community minded company. *This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Large Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Large Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today's military. Large Magnetics Assembler Key Responsibilities including, but not limited to: * Build transformers and assemblies using drawings, work instructions, and other documentation. * Prepare and assemble wire connections using crimping, tinning, insulating, and other techniques. * Assemble components, subassemblies, or systems using hand and power tools (manual, electric, or pneumatic). * Set up and build magnetic cores, steel laminations, and wound coils using stacking, banding, and interleaving methods. * Perform disassembly and rework/repair as needed. * Solder, braze, or epoxy components using soldering irons, torches, and appropriate tools. * Use fixtures, jigs, and calibrated measuring tools to ensure assembly accuracy and quality. * Clean and prep work surfaces for soldering, brazing, or applying adhesives. * Hermetically seal units using solder or braze techniques. * Collaborate with engineering and quality teams to support product improvements and compliance. * Enter data into ERP systems and complete documentation accurately. * Identify and report quality, safety, or equipment concerns to supervisors. * Follow SOPs, safety regulations, and quality standards. * Maintain a clean, organized work area and assist in general housekeeping tasks. * Participate in training and continuous improvement efforts. * Support team goals through effective communication and cooperation. Required Qualifications: * High School Diploma or GED equivalent * Must be 18 years or older * Must be able to work full time * While performing the functions of this job, the employee is frequently required to sit, use hands to finger, handle or feel, and lift up to 50 pounds. The employee is occasionally required to stand, walk, reach with hands and arms, stoop, kneel crawl, talk or hear, and lift up to 100 pounds * Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data Preferred Qualifications: * Previous experience in a manufacturing or industrial environments * Previous experience with assembly or fabrication work prescribed by drawings, sketches, work instructions * Basic mathematic skills including, but not limited to, addition, subtraction, multiplication, division, and determining ratios * Ability to use measuring tools including a tape measure, caliper, torque wrench & height gage * Previous technical training or relevant certifications * Basic mechanical aptitude and willingness to learn new skills * Ability to follow work instructions and work effectively in a team environment * Attention to detail and commitment to quality, safety, and site and product security * Good communication skills and ability to interact professionally with coworkers and supervisors * Ability to lift and move heavy objects as needed * Willingness to work flexible hours and overtime as required by production schedules Perks at Espey: * Pay Rate $18.79 - $20.21 per hour * Four -day work week * Medical, Dental, Vision, & Life insurance with Employee assistance program * Flexible spending account & Health savings account * Tuition reimbursement for qualified curriculum An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Must be US Citizen Job Type: Full-time Pay: $18.79 - 20.21 per hour Benefits: * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Life insurance * Paid time off * Tuition reimbursement * Vision insurance Schedule: * 10 hour shift Work Location: In person

ANTA Electric, Inc. is a rapidly growing electronics contract manufacturer located in Clifton Park NY. We are a woman owned company that offers design, engineering, and full turnkey services, which we are proud to produce 100% in the United States. We are seeking a few Assemblers for a full time permanent positions - no assembly experience necessary - we are looking for mechanically inclined people. Essential Duties and Responsibilities: Performs basic production activities associated with the production of Wiring Harnesses, Electromechanical Panel Builds, Assemblies. (Entry-Level) Cut wire to drawing dimensions. Apply labeling to assemblies. Apply shrink tubing to assemblies. Perform 'tinning' operations on stripped wire as required by the drawing. Perform basic mechanical assembly operations using various hand tools. Perform other basic tasks as assigned by the Production Supervisor Education and/or Work Experience Requirements: No prior work experience required; you must like working with your hands - being good at taking things apart & putting back together. Being mechanically inclined is required. Other Requirements: Must be able to read, write, and understand English Must possesses desire and ability to learn Ability to maintain regular, punctual attendance. Must be able to lift and carry up to 50 lbs. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8 hour shift - 8am - 4:30 pm - Monday to Friday Ability to commute/relocate: Clifton Park, NY 12065: Reliably commute or planning to relocate before starting work (Required) Experience: Assembly: 1 year (Preferred)

We have an exciting opportunity for Production Assemblers in our Albany-area client. This person is responsible for assembling components or parts of a product efficiently, accurately, and in accordance with established manufacturing procedures, quality standards, and safety regulations. This role requires dexterity, attention to detail, and a commitment to meeting production goals. Essential Duties and Responsibilities Assembly Operations: Perform routine and repetitive assembly tasks using hand tools, power tools, jigs, fixtures, and production equipment. Read, interpret, and follow blueprints, diagrams, engineering drawings, specifications, and assembly instructions (both written and verbal). Position and align parts, such as fasteners, screws, bolts, and wires, using various measuring instruments and techniques. Quality Control: Inspect components and completed assemblies for defects, damage, or inconsistencies. Ensure all assembled products meet company quality standards and specifications. Identify and report any non-conforming materials, parts, or processes to the supervisor immediately. Perform basic functional tests or checks on sub-assemblies as required This client offers solid benefits and fosters a family-first, collaborative environment. Pay is $17.00- $19.00/hr depending on experience. Apply today! This is a full-time position - shifts are Mon-Thursday from 7am-5:30 pm with possible OT on Fridays. #ZIPNBD #INDNBD

Job Description Assembler at Shine Wire: 1st Shift Shine Wire is seeking a talented and detail-driven Assembler to join our growing team. As an Assembler at Shine Wire, you'll play a crucial role in crafting top-tier electronic components, from custom cable assemblies to wire harnesses and electro-mechanical assemblies. If you take pride in precision and have a sharp eye for detail, this is your chance to grow your career while making a meaningful impact! Key Responsibilities: Assemble parts, products, or equipment based on detailed blueprints, instructions, or schematics. Operate and maintain assembly tools, machinery, and equipment. Perform soldering and desoldering tasks as required. Adhere to all safety procedures and regulations. Qualifications: High school diploma or GED; technical certification is a plus. Previous assembly experience is preferred. Ability to read and interpret blueprints, diagrams, and technical documents. What We Offer: Employee Ownership - As an employee-owned company, you're not just a worker; you're a shareholder. Career Growth - Opportunities to advance in a dynamic and innovative environment. Comprehensive Health Coverage - Ensuring you and your family are well cared for. Wellness Support - Resources to help you stay healthy. Paid Time Off - Because work-life balance matters. ComSonics is an Equal Opportunity Employer. Qualified candidates will be considered without regard to legally protected characteristics. In accordance with the Americans with Disabilities Act (ADA), if you require a reasonable accommodation to participate in the application or interview process, please contact Human Resources at **************. We will be glad to assist you. Job Posted by ApplicantPro

If you want to reshape the world and discover your greatest potential, Saint-Gobain provides one-of-a-kind opportunities for innovative problem solvers. We're one of only two companies in the world that is consistently recognized as both a top Global Employer and a Top 100 Global Innovator, but Saint-Gobain's remarkable story and culture of innovation begins with a team of nearly 200,000 creative, diverse and passionate team members collaborating across the globe. We are committed to our mission to improve lives because, every day, we witness the enormous impact of our efforts on the world around us. **We are seeking reliable, hard-working Production Workers for our Hoosick Falls location.** **Impact:** In this role you will be a valuable part of our production team, ensuring our production quotas are met in a timely fashion while observing the highest standards of safety and quality. + **2nd Shift: 2:30 PM - 11:00 PM, M-F; 3rd Shift: 10:30 PM - 7:00 AM, SUN-TH** + **Pay:** $19.20/hr to start; $20.05 after successful completion of 90 days **Available Roles:** + **Coating Operator - Pressure Sensitive Adhesive Tapes -** The position is responsible for operating an Adhesive Coating oven to produce pressure sensitive adhesive tape. Must pass and be certified in Static and Grounding as well as Bonding training. Eligible for additional $1.00/hr after 90 days + **Extrusion Line Operator - Extruded Tape -** The position is responsible for extruding raw materials into a film that is rolled up into roll form. Employee is responsible for the production, paperwork, and storage of the PTFE Film Extruded for their machine + **Converting Operator** - Pressure Sensitive Adhesive Tapes - The position is responsible for the converting of log rolls of PSAT to smaller rolls. Employee is responsible for operating a rewind or lathe slitter to convert to customer specification and order We are seeking candidates with the following: + High School diploma or equivalent. + You will need to be reliable and punctual, able to perform physical tasks that are repetitive, and lift up to 25-50 pounds. + Must be able to read and interpret drawings, use simple math and use basic hand held measuring tools. + Basic computer skills are required. + While prior manufacturing experience is preferred, we will provide on-the-job training for qualified applicants. Certain states require pay information be provided in job postings. The local pay range for this position is- **$19.20** **-** per hour. This hourly pay rate offered can vary depending on location/geographic region, internal equity, job-related knowledge, skills, and experience among other factors. In addition to the hourly base pay rate, this position is eligible for an annual bonus. The targeted bonus amount can be up to- **10%** **-** of hourly rate based on company and individual performance measures. The total annual target cash range (Hourly Pay Rate, Shift Differential and projected Bonus), annualized ( **40** **-** hrs/week * 52wks) for this position, is- **$44,116.80.** **Additional Pay Incentives for this Role Include:** + Standard Overtime (Hourly Rate * 1.5) Our ambition is to provide innovative solutions that combine material science, processing technology and design to save energy, provide protection, improve comfort, and give peace-of-mind to our customers. Our unique performance is delivered by passionate people, empowered to collaborate closely with our customers and solve their toughest challenges.- Our team members recognize that we all create the environment for people to succeed, with a culture built on respect, open and honest communication, and honoring our commitments to our customers and each other. And at the heart of our culture, we've learned working together makes good ideas, great ones. With a legacy dating back more than 360 years, Saint-Gobain offers employees the stability and security of a leading Global 500 corporation while operating like multiple small and agile start-ups, where entrepreneurial spirit, pioneering teamwork, and bold, forward-thinking ideas pave new paths. Every team member is encouraged to develop and leverage their unique expertise and strengths to make the greatest impact on the company and our end users. At Saint-Gobain, you're empowered and equipped with countless opportunities and resources for professional development. You will find the support you need to create a vision and roadmap for your career, and make that vision a reality. - - Saint-Gobain provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Saint-Gobain is an equal opportunity employer of individuals with disabilities and supports the hiring of veterans. **Employees have the flexibility to choose the benefits that best fit their individual needs.** + Health and Wellbeing - Supporting your wellbeing, to thrive in life and work. + Medical, Prescription Drug, Vision, and Dental Insurance + Healthcare Saving Account and Flexible Spending Account options + LiveWell Wellness Program + Employee Assistance Program (EAP) + Paid Time Off and Paid Parental Leave + Retirement and Protection - Helping to make the future life you want a reality. + 401(k) with Company Match, Retirement Accumulation Plan (RAP), Cash Balance Pension Plan + Company-provided Life Insurance, AD&D, Short-Term Disability + Voluntary employee and dependent life insurance, Long-Term Disability, Critical Illness and Accident Insurance + Additional Benefits - Helping shape the experience and impact you want + Group Legal + Identity Theft Protection + Auto and Home Insurance + Pet Insurance and Discounts + PerkSpot Employee Discount Program

Oldcastle APG, a CRH Company, is North America's leading provider of innovative outdoor living solutions that enable customers to Live Well Outside. The manufacturer's portfolio of premier building products inspires endless possibilities while providing enduring outdoor spaces where people can connect, reflect and recharge. Award-winning brands include Belgard hardscape, Echelon Masonry, MoistureShield composite decking, RDI railing, Catalyst Fence Solutions, Sakrete packaged concrete, Amerimix mortar, Pebble Technology International pool finishes, Lawn & Garden mulches and landscape features, and Techniseal sands and sealant technologies. Job Summary As an Oldcastle Production Laborer you will provide general labor support in a covered and uncovered manufacturing environment. The qualified individual must be available for all three scheduled work shifts based on the needs of the business and must have forklift experience. Job Responsibilities * Stack product as it comes off the production line * Clean machinery, maintain the surrounding area, keeping area free of debris * Use security gear at all times and follows all safety regulations * Work closely with the lead operator to prepare for shift production and become knowledgeable of the machinery you operate * Transport trash and debris away from production areas * Other duties and responsibilities as assigned Job Requirements * 1st / 2nd Shift And Weekend Availability Necessary * Physical requirements include lifting up to 60 lbs. repetitively, bending, and standing for long periods of time * Must be able to follow workplace safety procedures, including machinery lock out, tag out and use of personal protective equipment * High school diploma or GED, or equivalent combination of education, training and experience * Able to perform job tasks in sometimes dusty, hot and/or cold working conditions * Ability to think independently while successfully functioning in a team environment, with a proven track record of contributing toward team goals * Minimum 1 year experience in manufacturing or production setting Compensation * $29.14 per hour * 401(k) plan / group retirement savings program * Short-term and long-term disability benefits * Life insurance * Health, dental, and vision insurance * Paid time off * Paid holidays What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle APG, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Dec 17, 2025

Adecco is hiring for Warehouse Workers at a local client in Schenectady, NY. Warehouse Workers do essential jobs with one of our premier clients, with starting pay at $16.05 - $16.55/hr. As a Warehouse Worker, you will unload trucks with pallet jacks and move boxes/pallets into correct locations on the floor, open boxes and remove units and collateral, and you will scan units into the system. Requirements: This position is entry-level, no experience needed Must be able to follow verbal and written instructions Ability to stand for the entire shift and walk around the warehouse Ability to lift up to 50 lbs. What's in this for you? Weekly pay starting at $16.55 - $17.05/hr. Competitive benefits with options such as medical, dental, vision, and 401(k) Generous referral bonuses offered We have multiple shifts available and can help you choose the best shift to fit your schedule: Monday-Friday 7:00am-3:30pm Monday-Friday 4:00pm-11:30pm Click on apply now for immediate consideration for these Warehouse Worker positions in Schenectady, NY! Pay Details: $16.55 to $17.05 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

⭐ Assembler - 1st Shift ⭐ Pay: $18.50/hour Schedule: Monday - Friday, 7:00 AM - 3:30 PMJob Type: Temp-to-hire Join a growing manufacturing team as an Assembler and put your hands-on skills to work fabricating high-quality components. This role is ideal for someone detail-oriented, safety-focused, and committed to producing quality products.This is a 1st Shift role with excellent potential to become permanent for the right candidate. Responsibilities of the Assembler will include: Utilize MRP system to view work orders and work instructions Build product per work order using plastic fabrication techniques (welding, routing, cutting, bending/shaping) Carton and label finished goods Follow documented quality procedures and maintain high quality standards for all parts manufactured Accurately enter manufacturing transactions into the MRP system Maintain a safe, clean, and organized work environment Assist in maintaining equipment and sanitation following 5S principles Support cycle counting of inventory and tight inventory control Contribute to continuous improvement initiatives Perform other duties and projects as assigned Qualifications for the role of 1st Shift Assembler: Commitment to workplace safety High school diploma or equivalent required Certification in plastic or metal welding/fabrication preferred Basic computer skills (Excel, Word, Outlook) Strong customer focus and goal orientation Sustained attention to detail and accuracy Strong verbal and written communication skills Self-motivated and able to follow instructions About Us: red Shift Recruiting is the region's premier recruiting agency with over 100 years of combined experience in the recruiting field. We specialize in permanent, temporary, and temp-to-hire positions, connecting skilled professionals with top employers across the region. To see a full listing of all our open positions, please visit: ****************************************************** Similar Job Titles: Production Assembler Manufacturing Assembler Assembly Technician Production Worker Fabrication Technician Plastic Fabricator Metal Fabricator Manufacturing Technician Mechanical Assembler Production Associate Keywords: assembler jobs production jobs manufacturing jobs plastic fabrication welding jobs routing and cutting assembly line work fabrication technician manufacturing technician production technician assembly worker manufacturing associate 5S principles MRP system continuous improvement Seeking Candidates in Locations Including: Waterford, NY Troy, NY Cohoes, NY Clifton Park, NY Mechanicville, NY Halfmoon, NY Schaghticoke, NY Malta, NY Ballston Spa, NY Green Island, NY Watervliet, NY Stillwater, NY Latham, NY Saratoga Springs, NY Albany, NY

Our Fiber Lab is searching for an entry level Fiber Optic Cable Assembler to join our growing team. All fiber cable assembly technicians are trained on site in basic fiber optic theory, termination and cable processing tasks and procedures. KEY RESPONSIBILITIES OF A Fiber Optic Cable Assembler: Creating high quality products in a timely manner. Assemblers are required to take ownership of their work and provide mechanical inspection and basic continuity testing before submitting work for final test and approval. Employees are required to demonstrate knowledge and experience in detailed oriented jobs; and accuracy with numbers and part numbers. Communicate effectively with team leader to continuously establish and improve quality on the assembly line. Polished work should be complete and free of any microscopic contamination, residual glue, process slurry, and diamond particles from lapping films. REQUIRED SKILLS & EXPERIENCE OF A Fiber Optic Cable Assembler: Ability to read and understand internal procedures and policies Ability to understand and follow through on both verbal and written instructions. Team oriented with a continuous improvement outlook. Able to communicate courteously and professionally at all organizational levels Mechanically proficient Possess solid math, time management, and computer skills Work in an environment that is a casual clean room Regularly required to work near moving mechanical parts on cable reeler Able to move and/or lift up to 75 lbs - instruction required on safe lifting practices Frequently required to walk, sit, use hands and hand tools Employees are expected to use provided hand tools, fiber processing equipment and detailed assembly procedures / instructions State of the art manufacturing equipment Position Type/Hours: EOE Job Type: Full-time Hours: Mon - Fri, 7:30am-4:00pm Starting Pay: $19.00 - $23.00 In addition to an exciting and collaborative workplace, we also offer outstanding benefits including medical/dental, vision, life insurance, paid time off, an employee stock ownership program (ESOP), 401K, Profit Sharing Bonus and the opportunity to shine in a successful, 30+ year customer and community minded company. *This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Hours: Monday through Friday 7:30am-4:00pm Full Time - 40hours a week

Small Magnetics Assembler Technician Come join us at Espey, where we're shaping the future. As industry leaders in manufacturing high-quality power conversion solutions, we specialize in serving mission-critical military and rugged industrial sectors for use in the most harsh & severe environments. With over 90 years of experience, Espey is synonymous with innovation and reliability, providing essential power supplies and transformers that ensure the safety of our military personnel. As a publicly traded company on the NYSE (ESP), we're committed to excellence across all facets of our operation, from design and development to testing and manufacturing. Located in the vibrant city of Saratoga Springs, NY, just 30 minutes from the state capital and within easy reach of major metropolitan centers like New York City, Boston, and Montreal, Espey offers a unique opportunity to be part of something extraordinary. If you're ready to shape the future and embark on a fulfilling career adventure, join us at Espey. Let's build together! About the job: Embark on a new career journey to shape the future as a Small Magnetics Assembler Technician, where you will be part of a team crafting transformers destined for military and industrial products. The Small Magnetics Assembler connects components to assemble transformers and other various fabricated items, as specified by work orders, diagrams, work instructions, or customer layouts. Unlock your operational skills and production finesse by creating products that protect today's military. Key Responsibilities - Small Magnetics Assembler: * Wind coils for military and commercial use by following wiring diagrams, work orders, and specifications * Determine wire type, size, and finished dimensions based on job documentation * Set up coil-winding machines and adjust wire tension, counters, and forming tools as needed * Monitor winding process to ensure proper shape, turns, and consistency * Strip, bend, shape, and tin leads; solder wires to terminals and apply insulation sleeves * Finalize and clean completed coils before moving to the next production stage * Accurately complete documentation and input data into ERP system * Work with engineering to support quality, product improvement, and compliance * Report quality issues, equipment malfunctions, or safety concerns promptly * Follow all SOPs, safety regulations, and quality standards * Maintain a clean, organized workspace and participate in continuous improvement initiatives * Collaborate effectively with team members and support production goals Required Qualifications: * High School Diploma or GED equivalent * Must be 18 years or older * Must be able to work full time * While performing the functions of this job, the employee is frequently required to sit for long periods of time, have use of hands to finger with dexterity, handle or feel, reach with hands and arms, and lift up to 25 pounds. The employee is occasionally required to stand, walk, stoop, kneel, crouch or crawl, talk or hear, and lift up to 50 pounds. Close vision, ability to adjust focus, and color vision are all required for this position. * Must be US citizen with ability to secure a US Government security clearance; Applicants must meet eligibility requirements for access to export controlled data. Preferred Qualifications: * Manufacturing or assembly experience using drawings, sketches, or work instructions * Basic mechanical aptitude and ability to follow written and verbal directions * Strong communication skills; able to read, write, and present information clearly * Proficient in basic math, including fractions, decimals, percentages, and interpreting simple graphs * Problem-solving skills and ability to work with minimal variables in structured situations * Team-oriented, detail-focused, and committed to quality and safety * Physically capable of lifting/moving heavy objects * Flexible with work hours and available for overtime as needed Perks at Espey: * Pay Rate $ 17.52 - $18.83 per hour * IBEW Union Pension Plan * Four -day work week * Medical, Dental, Vision, & Life insurance with Employee assistance program * Flexible spending account & Health savings account * Tuition reimbursement for qualified curriculum An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Job Type: Full-time Pay: $17.52 - $18.83 per hour Benefits: * 401(k) * Dental insurance * Employee assistance program * Health insurance * Life insurance * Paid time off * Vision insurance Schedule: * 10 hour shift Ability to Commute: * Saratoga Springs, NY 12866 (Required) Ability to Relocate: * Saratoga Springs, NY 12866: Relocate before starting work (Preferred) Work Location: In person