Assembly line worker jobs in Parkway, CA - 51 jobs

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until . Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $18.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

This position is responsible for unloading Custom tempered glass at the Tempering unload. Proper glass handling techniques and minimal quality glass inspection a must. 12hr Shifts Available: Days 5:45am - 6:15pm ($20.00/hr.) Nights 5:45pm - 6:15am ($22.00/hr.) Essential Job Functions Near perfect attendance Read/measure glass accurately with tape measure Check glass quality and be able to identify basic glass defects Place glass in correct Customer positions into bungees, harps and squeeze racks Should be able to accurately reject glass from bungees and squeeze racks Properly close finished orders Must be able to properly edge delete glass without causing Quality issues Read and fill out proper unload paperwork (run list, packing maps) Should be able to set up customer orders properly Communicate with the Q.A and furnace operator in regards to quality or breakage issues Never allow the line to get backed up with glass Must possess a high sense of urgency Competitive wages plus SHIFT DIFFERENTIAL. You must be able to pass a pre-employment drug screen test. Paid training is provided for all jobs. Production and Forklift experience a plus. Benefits Include: Dental, Medical, HSA, Life Insurance, 401K plan, Profit Sharing (up to 52%/month), full time employment, college tuition reimbursement plan and PTO & holidays. Dental, Medical, HSA, Life Insurance, 401K plan, Profit Sharing (up to 52%/month), full time employment, college tuition reimbursement plan and PTO & holidays. Non-essential Job Functions Help out unload packer when able depending on glass production requirements Help out with coating, maintenance and other work station operations if asked Requirements The ability to adhere to the company's policies, rules and regulations as set forth in the employee handbook Maintain and wear all required personal protective equipment and attend all safety meetings The physical demands of the job: lift 50 pounds, bend, squat, kneel, twist, stand for long periods of time, stretching, pulling and pushing Cardinal Glass believes that their employees are their greatest assets, and we promote from within providing plenty of growth potential to those willing to put forth the effort and accept the responsibility. We are a drug free workplace and Equal Opportunity Employer

Production Worker Shift: 2nd- 3:30pm - 12:00am Monday-Friday *overtime and Saturdays may be required. Training will be on 1st shift for approximately 1 month until moving to 2nd shift. Wage: $19.97 + $0.40 shift premium for 2nd shift. From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of “People Build Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Reporting directly to the Shift Supervisor, as a Production Worker, you will be responsible for the safe operation of production equipment using standard operating procedures. Responsibilities include aiding in various areas of our manufacturing process as directed. Strive to meet plant goals and customer requirements. Safety is the top priority of every employee. What you will be doing: Catch, bundle and stack partitions. Catch strips and feed hoppers properly. Determines bad partitions and separate from quality product. We'd love to hear from you if: Work safely and follow all safety regulations. Keep an orderly and clean work area. Work well with other employees and have good communication skills. Able to follow verbal instructions. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options 401(k) retirement plan with company match Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 02/27/2026. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: * Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies * Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement * Ability to function effectively as a member of a production team Duties and Responsibilities: * Sort, inspect, clean, paint, label, and refill empty cylinders. * Maintain a safety focus at all times and wear the proper PPE * Ensure the consistent quality of cylinders are being processed * Load filled cylinders onto the truck(s) for the next day's shipments. * Ability to stand and walk 8 - 12 hours per day. * Ability to lift 50 pounds repeatedly throughout the day. * Perform general housekeeping duties. Knowledge, Skills and Abilities: * Ability to follow processes, procedures, and instructions * Ability to function effectively as a member of a production team * Willingness to grow and learn * Basic mechanical aptitude * Basic computer knowledge * Work in a fast-paced environment * Be able to stand 8-10 hours per day * Ability to obtain required state licensing * Ability to be forklift certified Education and Experience Required: * 1 - 2 years work experience in manufacturing is preferred * High School Diploma or GED Working conditions: * Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $18.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Job Description We are currently looking for experienced Auto Collision Journey Level Body Techs and Tear Down Disassembly and Reassembly Techs to join the Chilton Auto Body team at several of our San Francisco Bay Area locations. Come learn from the best and advance within the company. YOU MUST HAVE EXPERIENCE IN THE AUTO BODY COLLISION REPAIR INDUSTRY!! PLEASE REPLY BY INCLUDING YOUR RESUME!! Job Summary: Examine vehicles for collision-related damage and document the time and effort required to repair and refinish vehicles to pre-accident condition in accordance with industry standards and insurance company guidelines. Tear down and re-assembly of vehicles; welding with MIG and Spot resistance welders; replacing panels; straighten, grind, sand and fill repair panels; repairing frames and unibody using frame rack. Job Requirements: *Previous experience in automotive collision necessary (3+ years for A-tech level) and must have knowledge of automotive disassembly and reassembly. *I-CAR certifications not required, but are a plus *Must be detail oriented, organized, and have a high standard for quality *Must provide your own basic tools. *Must be eligible to work in the U.S. *Must agree to and pass a thorough background check. Benefits: *Paid holidays and 2 weeks PTO *Medical, dental, vision, life insurance *Matching 401(k) Pay Rate: $40-45 A-Tech; $30-40 B-Tech; $18-30 C-Tech Descripción del trabajo: Estamos buscando técnicos experimentados en desmontaje y montaje de colisión de automóviles para unirse al equipo de Chilton Auto Body en varias de nuestras ubicaciones en el área de la Bahía de San Francisco. Venga a aprender de los mejores y avance dentro de la empresa. Resumen de trabajo: Se debe examinar el vehículo en busca de daños relacionados con la colisión y documentar el tiempo y el esfuerzo necesarios para reparar y restaurar los vehículos a la condición previa al accidente de acuerdo con los estándares de la industria y las pautas de la compañía de seguros. Requisitos de trabajo: *Experiencia previa en colisión automotriz necesaria y debe tener conocimientos de desmontaje y montaje de automóviles. *Debe proporcionar sus propias herramientas básicas. *Debe ser elegible para trabajar en los EE. UU. Beneficios: *Días festivos pagados y 2 semanas de tiempo pagado para vacaciones o enfermedad *Médico, dental, visión, y seguro de vida *Igualdad de contribución al plan de retiro 401(k)

Production Line FLSA Status: Non-Exempt $18-$19 Bilingual Preferred. Full Benefits include: Medical, Dental, Vision - PTO. Beginner Tier 1, $18-$19 ColorCoat, Inc., headquartered in West Sacramento, CA., is the largest paint and coatings applicator in the US, serving window and door manufacturers with multiple facilities across the country. Being a part of a dynamic team means being in a tiered paid structure. We don't just cross train - we train you to know every production cell and earn a tiered wage rate where there is always room to earn more as you learn and grow. We are seeking individuals who want to be a part of our company and grow with us. This individual must be a self-starter and team player. Someone who understands the production line and is willing to learn. This individual must have a keen attention to detail and be consistent with the ability to maintain productive speed. Punctuality is key to our output. Duties and Responsibilities include the following-other duties may be assigned. Disassembles window and door units in preparation for production Must be able to lift and stage multiple units on production carts. Labels each piece of unit with specific ID numbers and colors. Pushes each cart to next production cell. Cleaning and masking window and door frames and other parts in preparation for painting. Checks the surface of the unit and determines if silicone is present. Removes silicone using a razor blade, sanding pad, or other tools. Uses air hose to blow off particles Reports defects to floor lead. Removes masking paper and tape from painted window and door after quality approved. Cleans paint and glue from glass and inserts bulb seal if present. Inserts screen into frame if present and inserts weep hole covers if required. Assembles window and door with all parts removed during disassemble. Packages units based on customer requirements. Scans and adheres label on window if required. Stages on carts for shipping per customer Applies Banding/strapping as required. Perform other related duties as assigned. Follow all safety guidelines and maintains clean workspace. Maintains productive pace set by Floor Lead and/or Manager and follows managers' direction. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, stoop, kneel, crouch or crawl, and talk or hear. The employee is occasionally required to climb or balance. The employee must regularly lift and/or move up to 100 pounds. Specific vision abilities required by this job include depth perception, ability to adjust focus, and ability to see color. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to toxic or caustic chemicals. The employee is occasionally exposed to wet or humid conditions (non-weather) and work near moving mechanical parts. The noise level in the work environment is usually loud Applicants must be authorized to work in the U.S. ColorCoat, Inc, is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Your Right to Work - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Job Type: Full-time COVID-19 considerations: ColorCoat Inc cares about the health and safety of our employees. We follow all CDC and OSHA requirements. We keep up daily with the COVID-19 Guidelines and disclose the information to all our locations.

Interview - 12/12/25 - Chris Schoephoerster Interview - 1/9/26 - Michael Holderness

Description TimberQuest Production Worker Carpenters Local Union 152 A skilled production worker employed by TimberQuest Assembly North will be primarily responsible for assembling prefabricated wall sections within a factory setting, following detailed blueprints and quality standards to build complete wall structures for commercial use, while adhering to safety regulations and production timelines. Key Responsibilities: Assembly: Precisely assembling pre-cut wall and floor components using various power tools and hand tools, including nailers, drills, saws, and levelers, ensuring proper alignment and structural integrity. Quality Control: Performing thorough inspections of each wall panel to identify and address any defects in materials or assembly, maintaining high quality standards. Material Handling: Accurately loading and unloading building materials from storage areas to the production line, ensuring proper organization and inventory control. Blueprint Reading: Interpreting construction blueprints and specifications to accurately assemble wall panels according to design plans. Safety Compliance: Adhering to all safety protocols in the factory environment, including wearing personal protective equipment (PPE) and following proper lifting techniques. Teamwork: Collaborating with other production team members to maintain efficient workflow and meet production deadlines. Required Skills and Qualifications: Construction Experience: Prior experience in carpentry, framing, or general construction is preferred. Attention to Detail: Ability to work with precision and consistently maintain high-quality standards. Physical Abilities: Capability to lift heavy materials and perform repetitive tasks throughout the workday. Basic Math Skills: Understanding of measurements and ability to calculate dimensions accurately. Blueprint Reading Skills: Ability to interpret construction plans and drawings. Power Tool Proficiency: Familiarity with a variety of power tools used in construction, including nail guns, drills, and saws. Potential Work Environments: Factory Production Floor: Most of the work will take place in a controlled factory environment with a production line setup.) Additional information: Starting compensation for this role typically ranges between $22.03 (after 90 days will increase to $24.48) and $31.00. Individual pay is determined based on several factors, including, but not limited to, work experience and job knowledge, complexity of the role, job location, etc. Your recruiter can share additional details during the interview process. XL is an Equal Opportunity Employer (EOE AA M/F Vet/Disability). Qualified applicants are evaluated without regard to race, color, religion, sex, national origin, sexual orientation, political affiliation or belief, age, gender identity, disability, status as a protected veteran, or any other protected characteristic.

**Job Title: Assembly Team Member** **Job Description** Join our dynamic assembly team where you will play a crucial role in the production process. You will work in either the Components Table or the Crossarms Table, assembling essential parts and preparing them for distribution. This position is pivotal in ensuring the smooth operation of our assembly line and the quality of the components we produce. **Responsibilities** + Assemble components such as nuts and bolts at the Components Table and ensure they are boxed to the required amount. + Work independently at the Components Table with repetitive tasks requiring attention to detail. + At the Crossarms Table, attach components to utility arms, including brackets, braces, copper wire, and signs. + Collaborate with a team of three to palatalize completed arms for distribution, primarily to utility companies like PG&E. **Essential Skills** + Experience in assembly or production work, preferably within a warehouse setting. + Ability to perform repetitive tasks with high attention to detail. + Familiarity with warehouse inventory processes. **Additional Skills & Qualifications** + Recent warehouse experience required. + 1-2 months of relevant experience in a similar role. + Prior manufacturing experience is preferred. **Why Work Here?** This is an excellent opportunity for career growth with a short 4-month contract leading to potential permanent hire. Experience upward mobility as many of our leads and managers are promoted from within. **Work Environment** Work in an industrial manufacturing environment focusing on producing pole line equipment for utility companies like PG&E. The shift starts at 3 PM and includes a 30-minute lunch break. Be prepared for overtime as required. **Job Type & Location** This is a Contract to Hire position based out of Pittsburg, CA. **Pay and Benefits** The pay range for this position is $17.00 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Pittsburg,CA. **Application Deadline** This position is anticipated to close on Jan 16, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description Join the Essel team as an Industrial Production Worker and be part of a fast-paced manufacturing environment. As an Industrial Production Worker, you will be responsible for operating and maintaining production machinery, assembling products, and inspecting finished goods to ensure quality standards are met. Responsibilities include: Operating production equipment and machinery according to standard operating procedures. Assembling products and packaging finished goods. Performing quality checks to ensure products meet specifications. Performing routine maintenance and cleaning of machinery. Following all safety protocols and wearing appropriate personal protective equipment. Requirements Requirements: Prior experience working in a manufacturing or production environment preferred. Ability to operate production machinery and tools. Attention to detail and ability to follow instructions. Ability to stand for long periods and perform physical tasks as required. Basic computer skills. Ability to work in a team and contribute to a positive work environment. Benefits Industry Standard

SPAR Merchandising & Assembly Inc. (SM&A) is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Project Description: Opportunity is part-time, on-going Assembly work for both in-store (Nationwide Office supply chain) and in-home furniture assembly. As a Technician with SM&A, Inc. you will be assembling RTA Furniture but we also have great opportunities for those who possess experience with TV Wall Mounts, and assembling Gas Grills, Sporting Goods, Bicycles, and Display Racks. What we Offer: Competitive pay DailyPay - work today, get paid tomorrow Capabilities Required Merchandising and/or commercial furniture assembly experience Ability to assemble products according to written instructions Able to read plan-o-grams and perform customized category resets independently Able to carry and lift up to 50 lbs. Able to bend and stand for extended periods Internet access & active email address Report client work completions on the same day as service Reliable transportation, some travel involved Have own tools We Are an Equal Opportunity Employer SPAR provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SPAR complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. SPAR expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of SPAR's employees to perform their job duties may result in discipline up to and including discharge. We can recommend jobs specifically for you! Click here to get started.

Job Description Blackwatch International is an agile, mission-focused small business committed to supporting Federal Government objectives through high-impact services. Our clients include the Department of State, Department of Defense, Department of Energy, and members of the Intelligence and Law Enforcement communities. Headquartered in McLean, VA, with offices in Sacramento, CA, Blackwatch prioritizes quality and innovation, holding industry-leading certifications including ISO 9001:2015, ISO/IEC 27001:2013, ISO/IEC 20000-1:2018, and CMMI Level 3. Blackwatch offers a dynamic work environment, professional growth opportunities, and a steadfast commitment to excellence. Position Title: Solder Technician (Junior-Mid Level) Position Location: Sacramento, CA Position Type: Regular Full-Time Years of Experience: 2-7 years Security Requirements: Secret Citizenship Required: Yes Summary/Objective Blackwatch International is seeking a highly motivated and detail-oriented solder technician with mechanical and technical aptitude to the semiconductor facility support industry. This is an opportunity for someone with strong organizational skills, a professional demeanor and the desire to build a strong foundation in the semiconductor industry. In this hands-on role, you'll play a critical part in supporting a wide range of mission critical, legacy, and leading-edge semiconductor wafer and microchip manufacturing. Responsibilities Perform work assignments ranging from complex assembly of electronic and mechanical devices, solder/de-solder rework, connector repair, SMT, thru-hole components and BGA support. Perform work assignments according to assembly instructions, specifications, and diagrams. Perform printed circuit boards (PCB), power supplies, and cable harnesses troubleshooting. Meet all established requirements as defined by Standard Operating Procedures (SOPs), IPC, J and ISO standards. Testing and verification of electronic and electro-mechanical assemblies and sub-assemblies. Perform routine data entry into the production Work Request System or equivalent project-tracking system. Prepare accurate, document-controlled quality records and documentation related to work in progress, ensuring timely and complete submission. Assist equipment engineers and technicians with routine laboratory equipment services. Provide minor lab support including but not including but not limited to inventory management tasks, raw materials support, preventative equipment/tool maintenance support, lab infrastructure, escorting tool vendors, and other general laboratory upkeep. Perform other tasks as assigned by management. Basic Qualifications: 2 to 7 years of progressive soldering experience and techniques. Proficiency in reading and interpreting technical drawings, schematics, and specifications. Current or previous J-STD-001 and IPC-A-610 certifications preferred. Candidates without active certifications must obtain them within 6 months of employment. Experience using bench top, calipers, hand tools, micrometers, microscopes, power tools, soldering iron, wire strippers, volt meters, and other testing equipment. Strong manual dexterity, excellent interpersonal, organizational, and communication skills. Ability to replace components such as transistors, resistors, relays, and capacitors. Self-motivated and ability to work independently with minimal direction or supervision. Flexible with change and willingness to learn new skills. Excellent problem-solving, troubleshooting, and critical thinking skills. Basic mathematics, chemistry, and electronics component knowledge. Basic computer skills utilizing Microsoft Excel, Outlook, and Word. Desired Qualifications (not required, but a plus): Active or previous secret security clearance. Associates degree or 2-year technical certificate or bachelor's in science, technology, engineering and/or mathematics (STEM) or equivalent military training/experience or discipline in electronics, electrical, mechanical, mechatronics, etc. (2+) or more years of experience with Microelectronics component/enclosure/circuit board manufacturing/assembly, both surface mount assembly and hand soldering operations. Experience utilizing reflow ovens and using conformal coaters. Printed Circuit Board Assemble (PCBA) and cable wire harness assembly experience. Semiconductor packaging experience. Desired Certifications (not required, but a plus): IPC/WHMA-A-620 IPC-7711/7721

This position is responsible for loading and unloading products in and out of automated glass handling equipment by way of hand, forklift, and/or platform lift in a 24/7 operation. Rotating 12 Hour Shifts (2/2/3 Schedule) Dayshift 5:45 AM - 6:15 PM ($20 - $22/hr. D.O.E., plus overtime) Graveyard 5:45 PM - 6:15 AM ($22 - $24/hr. D.O.E., plus overtime) Earn up to $75,000 (D.O.E.) in the first year with monthly profit sharing potential and the opportunity for company contributions to 401K, while only working 15 - 16 days a month on average. Benefits Include: Dental, Medical, HSA, Life Insurance, 401K plan, Profit Sharing (up to 52%/month), full time employment, college tuition reimbursement plan, and PTO & holidays. You must be able to pass a pre-employment drug screen test. Paid training is provided for all jobs. Job Functions Operate a forklift and platform lift to move glass around the warehouse, and in and out of glass handling equipment. Setup glass handling equipment via computer screen to match the glass size being loaded/unloaded. Physically hand unload custom sizes off the end of the production line. Perform quality checks of finished goods. Close finished goods and relocate them into warehouse via forklift/platform lift. Follow and execute a product run list. Communicate with teammates via UHF radio. Requirements Production and Forklift experience, although not required, is a plus. Ability to effectively communicate and work as part of a productive team. Flexible and able to rotate into different areas, team player. Apply critical and logical thinking to troubleshoot glass handling equipment. Ability to plan three steps ahead and be prepared for what's next. Wear and maintain all the required personal protective equipment (PPE). Lift 50 pounds, bend, squat, kneel, twist, stretching, pulling, pushing, and standing for long periods of time. Adhere to company policies and rules and regulations set forth in the employee handbook. Cardinal Glass believes that their employees are their greatest assets, and we promote from within providing plenty of growth potential to those willing to put forth the effort and accept the responsibility. We are a drug free workplace and Equal Opportunity Employer

Production Worker Shift: 2nd- 3:30pm - 12:00am Monday-Friday *overtime and Saturdays may be required. Training will be on 1st shift for approximately 1 month until moving to 2nd shift. Wage: $19.97 + $0.40 shift premium for 2nd shift. From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Reporting directly to the Shift Supervisor, as a Production Worker, you will be responsible for the safe operation of production equipment using standard operating procedures. Responsibilities include aiding in various areas of our manufacturing process as directed. Strive to meet plant goals and customer requirements. Safety is the top priority of every employee. What you will be doing: * Catch, bundle and stack partitions. * Catch strips and feed hoppers properly. * Determines bad partitions and separate from quality product. We'd love to hear from you if: * Work safely and follow all safety regulations. * Keep an orderly and clean work area. * Work well with other employees and have good communication skills. * Able to follow verbal instructions. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits * Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options * 401(k) retirement plan with company match * Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services * Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family * Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance * Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until . Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: * Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies * Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement * Ability to function effectively as a member of a production team Duties and Responsibilities: * Sort, inspect, clean, paint, label, and refill empty cylinders. * Maintain a safety focus at all times and wear the proper PPE * Ensure the consistent quality of cylinders are being processed * Load filled cylinders onto the truck(s) for the next day's shipments. * Ability to stand and walk 8 - 12 hours per day. * Ability to lift 50 pounds repeatedly throughout the day. * Perform general housekeeping duties. Knowledge, Skills and Abilities: * Ability to follow processes, procedures, and instructions * Ability to function effectively as a member of a production team * Willingness to grow and learn * Basic mechanical aptitude * Basic computer knowledge * Work in a fast-paced environment * Be able to stand 8-10 hours per day * Ability to obtain required state licensing * Ability to be forklift certified Education and Experience Required: * 1 - 2 years work experience in manufacturing is preferred * High School Diploma or GED Working conditions: * Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $18.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Production Line FLSA Status: Non-Exempt $18-$19 Bilingual Preferred. Full Benefits include: Medical, Dental, Vision - PTO. Beginner Tier 1, $18-$19 ColorCoat, Inc., headquartered in West Sacramento, CA., is the largest paint and coatings applicator in the US, serving window and door manufacturers with multiple facilities across the country. Being a part of a dynamic team means being in a tiered paid structure. We don't just cross train - we train you to know every production cell and earn a tiered wage rate where there is always room to earn more as you learn and grow. We are seeking individuals who want to be a part of our company and grow with us. This individual must be a self-starter and team player. Someone who understands the production line and is willing to learn. This individual must have a keen attention to detail and be consistent with the ability to maintain productive speed. Punctuality is key to our output. Duties and Responsibilities include the following-other duties may be assigned. Disassembles window and door units in preparation for production Must be able to lift and stage multiple units on production carts. Labels each piece of unit with specific ID numbers and colors. Pushes each cart to next production cell. Cleaning and masking window and door frames and other parts in preparation for painting. Checks the surface of the unit and determines if silicone is present. Removes silicone using a razor blade, sanding pad, or other tools. Uses air hose to blow off particles Reports defects to floor lead. Removes masking paper and tape from painted window and door after quality approved. Cleans paint and glue from glass and inserts bulb seal if present. Inserts screen into frame if present and inserts weep hole covers if required. Assembles window and door with all parts removed during disassemble. Packages units based on customer requirements. Scans and adheres label on window if required. Stages on carts for shipping per customer Applies Banding/strapping as required. Perform other related duties as assigned. Follow all safety guidelines and maintains clean workspace. Maintains productive pace set by Floor Lead and/or Manager and follows managers' direction. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, stoop, kneel, crouch or crawl, and talk or hear. The employee is occasionally required to climb or balance. The employee must regularly lift and/or move up to 100 pounds. Specific vision abilities required by this job include depth perception, ability to adjust focus, and ability to see color. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to toxic or caustic chemicals. The employee is occasionally exposed to wet or humid conditions (non-weather) and work near moving mechanical parts. The noise level in the work environment is usually loud Applicants must be authorized to work in the U.S. ColorCoat, Inc, is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Your Right to Work - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Job Type: Full-time COVID-19 considerations: ColorCoat Inc cares about the health and safety of our employees. We follow all CDC and OSHA requirements. We keep up daily with the COVID-19 Guidelines and disclose the information to all our locations.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Under close supervision, performs a wide variety of electronic and electro-mechanical subassembly and assembly operations of a semi-skilled nature to build up and assemble simple units such as power supplies, modules, chassis drawers, cable harnesses, PC boards, electronic systems and subassemblies. Solders and de-solders through-hole and surface mount technology (SMT) components. Installs and/or removes discrete components such as transformers, resistors, transistors, capacitors, inductors, etc., on to printed circuit assemblies (PCA's), panels using both traditional soldering iron and or hot air techniques. **Essential Duties and Responsibilities include the following. Other duties may be assigned.** + Follows production drawings, sample assemblies and verbal instructions with general supervision. Understands and applies established acceptable workmanship practices to all facets of electronic assembly. + Interprets and works from electromechanical schematics, drawings, work instructions and bills of material to understand the required parts and steps needed to complete the assigned assembly. + Reads worksheets and wiring diagrams, selects components, such as transistors, resistors, relays, capacitors, and integrated circuits. + Mounts assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel, requiring manual dexterity and the ability to work with simple hand tools, soldering equipment, volt meters and other related test instrumentation. Knowledge of cleaning, lead preparation, component mounting, parts orientation. + Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points. + Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device. + Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place. + Uses hand and small power tools to place small components in boards, cables, connectors, etc. Inspect parts and performs basic tests. + May perform other assembly tasks such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies. + Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. + Performs hand soldering using a soldering iron. + May perform work (soldering and general inspection) under microscope. + Performs online go-not-go testing and inspection to ensure parts and assemblies meet production specifications and standards. + Troubleshoots and replaces defects of finished products. + Reworks and repairs defective units rejected by inspection or test personnel. + Follows safety procedures in the use and handling of flammable and hazardous chemicals required to meet all cleanliness specifications. + Must be able to follow specific procedures and detailed instructions completely. + Ensures that quality checks are completed throughout the manufacturing process. + Records information on production records, logs and other report forms. **Qualifications:** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Education and/or Experience** Requires a high school diploma and some degree of vocational or technical training; 0-2 years of directly related experience. **Salary Range:** $37,200.00-$49,600.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

**Job Title: Assembly Team Member** **Job Description** Join our dynamic assembly team where you will play a crucial role in the production process. You will work in either the Components Table or the Crossarms Table, assembling essential parts and preparing them for distribution. This position is pivotal in ensuring the smooth operation of our assembly line and the quality of the components we produce. **Responsibilities** + Assemble components such as nuts and bolts at the Components Table and ensure they are boxed to the required amount. + Work independently at the Components Table with repetitive tasks requiring attention to detail. + At the Crossarms Table, attach components to utility arms, including brackets, braces, copper wire, and signs. + Collaborate with a team of three to palatalize completed arms for distribution, primarily to utility companies like PG&E. **Essential Skills** + Experience in assembly or production work, preferably within a warehouse setting. + Ability to perform repetitive tasks with high attention to detail. + Familiarity with warehouse inventory processes. **Additional Skills & Qualifications** + Recent warehouse experience required. + 1-2 months of relevant experience in a similar role. + Prior manufacturing experience is preferred. **Why Work Here?** This is an excellent opportunity for career growth with a short 4-month contract leading to potential permanent hire. Experience upward mobility as many of our leads and managers are promoted from within. **Work Environment** Work in an industrial manufacturing environment focusing on producing pole line equipment for utility companies like PG&E. The shift starts at 3 PM and includes a 30-minute lunch break. Be prepared for overtime as required. **Job Type & Location** This is a Contract to Hire position based out of Antioch, CA. **Pay and Benefits** The pay range for this position is $17.00 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Antioch,CA. **Application Deadline** This position is anticipated to close on Jan 16, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Join the Essel team as an Industrial Production Worker and be part of a fast-paced manufacturing environment. As an Industrial Production Worker, you will be responsible for operating and maintaining production machinery, assembling products, and inspecting finished goods to ensure quality standards are met. Responsibilities include: Operating production equipment and machinery according to standard operating procedures. Assembling products and packaging finished goods. Performing quality checks to ensure products meet specifications. Performing routine maintenance and cleaning of machinery. Following all safety protocols and wearing appropriate personal protective equipment. Requirements Requirements: Prior experience working in a manufacturing or production environment preferred. Ability to operate production machinery and tools. Attention to detail and ability to follow instructions. Ability to stand for long periods and perform physical tasks as required. Basic computer skills. Ability to work in a team and contribute to a positive work environment. Benefits Industry Standard