Assembly line worker jobs in Springdale, AR - 664 jobs

American Phoenix Pre-weighed Chemical Packaging division operates from five strategic locations: Topeka Kansas, Lawton Oklahoma, Anniston Alabama, Fayetteville North Carolina and Danville Virginia. Initiated in 2004, American Phoenix designed, built and maintains it proprietary chemical weighing and packaging equipment. Pre-weigh services are utilized by large manufacturing companies requiring precisely weighed chemicals for use in rubber mixing. We provide both product reliability and economic value to a critical component of rubber mixing that makes your process more efficient. Pay Range: $18.50/hr + $1.25 shift premium on night shifts Hours are 8pm to 8am or 8am-8pm (12-hour shifts) Rotating Shifts - will work every other weekend Mon-Tues, Fri- Sat Sun, Wed-Thur. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Set up bins for shipping (make sure bins are clear of debris, move on & offline) Check the first bag of every run and document the weight Verify every bin has the correct code name Inspect bag for foreign material Isolate any unused hopper by bagging the outlet chute Print Chemical Setup Sheet at the start of each production run Remove air from bags and seal using a heat sealer Make sure bags are sealed completely and placed in correct bin Assist Lead Operator I as needed during setup of each production run Correct problems on the line caused by chemical over/under weight requirements Notify Lead Operator I or Supervisor/Scheduler when errors on production line happen immediately Complies with company policies Analyze and resolve work problems and assist in solving work problems using risk management Make sure work area stays clean Assist where needed Our Benefits Include: Immediate PTO Accrual Health Insurance Dental Insurance 401(K) Company paid Short-term and Long-term Disability Company paid Life Insurance 9 Paid Holidays Personal Days Optional company paid shower time at end of each shift Employee Assistance Program WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to airborne particles. Works near moving mechanical parts is occasionally exposed to toxic or caustic chemicals and elevated noise levels. The employee is expected to follow all safety procedures and use appropriate personal protective equipment. This job describes the general nature and level of work performed by employees assigned to this position. It does not state or imply that these are the only duties and responsibilities assigned to the job. Employees may be required to perform other job-related duties as requested by management. All requirements are subject to change over time and to possible modification to reasonably accommodate individuals with a disability. Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Employees must report to work and work the designated work schedule-failure to do so creates the inability of our company to meet customers' orders. Excellent attendance is part of your essential job responsibility. Job Requirements: Required: Must have basic working skills Must have reliable transportation to and from work. Must pass pre-employment testing EEO

Job DescriptionAssembly Hours and Pay Rate: Hours for assembly: 4:30pm - 3:00am Monday - Thursday Pay for assembly: $20.25/hr. you could be put in fabrication or finish. In Fabrication you will handle parts as they process through fabrication. In Finish you will transfer fabricated parts to various locations within the finish department. In both the Fabrication and Finish department you continuously lift parts that weigh anywhere from 1lb to 18lbs. You will stand for your 10 hour shift. In assembly you will put together all of the various components that make up a free standing gas or electric range. This requires you to stoop, bend, twist, lift, manipulate small parts and use some small manual and power hand tools. Must have manufacturing, assembly or general warehouse experience and able to pass a drug screen This is a temp to hire position.Safety Sensitive Role Key Personnel Benefits While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Apply today!In order to make the best use of your time, only qualified applicants will be contacted. Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.Key Personnel is an Equal Opportunity Employer.#INDLI26

MAJOR FUNCTION This position is responsible for the assembly, complete machine documentation and other various assembly operations. ESSENTIAL DUTIES AND RESPONSIBILITIES Assemble parts and accessories and / or machines as required by daily report; follow checklists and manufacturing order definitions. Refer to check lists as steps of assembly operation Verify M.O. matched actual approved kit (sub-assembly) and/or machines and contents of M.O. including correct materials and labor time. Report defective assemblies and/or machines components to final Assembly Lead and replace as required. Assist with other kit assemblies and/or machine assemblies as required. Perform production unit clean up tasks as assigned in work instruction and safety standards. Sweep machine building path daily or as required. MINIMUM REQUIREMENTS High school diploma or equivalent; previous machine assembly experience preferred but not required. Must be mechanically inclined. KNOWLEDGE & PERSONAL ATTRIBUTES: Ability to read interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to read and write and speak English effectively. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. The ideal candidate will possess problem solving skills, dependability and will observe all safety and security guidelines. Must be able to lift up to 50 lbs. Must be able to stand for long periods of time. Must be able to work in a manufacturing environment with non-A/C working environment. Must be able to work around mechanical / pneumatic tools and be able to use them. Must be able to work in a fast paced working environment, and be multi-tasked. Must be able to work occasional overtime, including Saturday's as work demands. Let's create a cleaner future together Cleaning has emerged as a key contributor to health and safety, sparked by technology and innovation. At Nilfisk we are a driving force in this development. Being part of Nilfisk means thinking outside of the box, bringing your inspiring ideas to life, sharing the results, and learning from your setbacks. We believe that diversity is our greatest strength - as we achieve the best results from a wide variety of views and approaches. At Nilfisk, you have the freedom to be yourself and express your opinions. Nilfisk is firmly committed to growth and sustainability in everything we do. You will be empowered in your role as you collaborate with passionate colleagues on a quest to create a cleaner future. Are you ready to make a change for a cleaner future? Benefits Nilfisk offers a competitive total compensation package. Benefits include Health, Dental, Vision, Basic and Supplemental Life, Critical Illness and Accident Insurance, Flexible Spending Accounts, Health Savings Account with Company Contribution, 401K with Company Match, Long and Short Term Disability, Employee Assistance Program, Legal Plan, Parental Leave, Paid Vacation and Sick Time, Paid Volunteer Day, Tuition Reimbursement, Wellness Reimbursement, Scholarship opportunities, etc. Pay Range $17.98-$22.48 per hour. The estimated range indicates the expected hourly pay for this position. It does not include potential bonus incentives such annual or performance bonus' as well as sales and sales related incentives, or overtime. The actual pay offered may vary based on several factors, including the applicant's qualifications, relevant experience, unique skills, education level, certifications or licenses, differentials, and the location from which they will work. The final pay determination will comply with state or local minimum wage laws applicable to the job's location. We may ultimately pay more or less than the posted range. This range may be modified in the future. Job applicant FAQ Do you have questions regarding the recruitment process or alike? Please visit our FAQ for job applicants. Talent Acquisition Process Nilfisk does not charge any fee at any stage of the recruitment process. We do not request payment or fees from candidates for any employment-related purpose. If you encounter any such activity, please report it immediately on the Nilfisk Whistleblower website. Nilfisk is an Equal Opportunity employer. We consider all qualified applicants without regard to race, religion, sex, national origin, age, sexual orientation, gender identity, disability, or veteran status, among other factors.

Allient Inc. is in growth mode and currently seeking Assemblers to join our team in Tulsa, OK! The Assembler will perform all operations required for the manufacture and assembly of small motor components and motion control products and systems. Apply now! Responsibilities: * Loads and unload previously setup machines, to perform fastening, force fitting, or light metal-cutting operation on assembly line. * Inspects components and assemblies both visually and using inspection tools as required. * Uses prints, job orders, operations methods sheets (OMS), work instructions and other specifications to ensure that proper and within specification materials and tools are utilized. * Inventories (cycle counts) materials in work area. * Prepares required documentation. Minimum Qualifications: * High school education or equivalent. * Must be able to read and interpret drawings, follow routers, use simple math, and use basic hand-held measuring tools. * Good manual dexterity to manipulate small objects. * Ability to read blueprints, calipers, and micrometers. Soldering, lead wiring, and forming experience is a plus. Physical Demands: * Ability to stand for long periods of time with periodic sitting, bending, stooping, and lifting 10 to 30 pounds. * Consistent use of both hands using repetitive motion. * Occasionally, the employee must lift and/or move up to 50 pounds with assistance. * Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: * While performing the duties of this job, the employee is regularly exposed to vibration. The employee occasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually very loud. Apply now! * To learn more about Allient, visit our website at *************** * Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description We are seeking an Assembly/Production Line Worker to become an integral part of our team! You will perform assembly line tasks as well as identify areas of improvement to increase efficiency. Responsibilities: Work with a team to assemble entire products or components Must be available to work 1st, 2nd or 3rd shift depending on needs. Rotate through tasks for specific production processes Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area Qualifications: Previous experience in manufacturing, assembly, or other related fields Familiarity with assembly tools and equipment Ability to handle physical workload Ability to work well in teams Ability to thrive in a fast-paced environment Company DescriptionAs a top staffing provider, Express Employment Professionals puts people to work in all types of jobs at all levels. When you work with Express, you build a relationship with a team of employment professionals who have built personal relationships with the businesses that are hiring in your community. For employers, Express provides customized staffing solutions to help overcome recruiting challenges, manage production fluctuations, handle changes in project scope, and navigate seasonal hiring needs. Our expert staffing services are designed to meet the unique workforce requirements and ensure the success of businesses throughout our community. At Express Employment Professionals we are on a Mission to put a Million People to Work in a Year!Company DescriptionAs a top staffing provider, Express Employment Professionals puts people to work in all types of jobs at all levels. When you work with Express, you build a relationship with a team of employment professionals who have built personal relationships with the businesses that are hiring in your community.\r \r For employers, Express provides customized staffing solutions to help overcome recruiting challenges, manage production fluctuations, handle changes in project scope, and navigate seasonal hiring needs. Our expert staffing services are designed to meet the unique workforce requirements and ensure the success of businesses throughout our community.\r \r At Express Employment Professionals we are on a Mission to put a Million People to Work in a Year!

Job Description Rx Systems, Inc. is a climate-controlled facility, which is located in the Point West Industrial Park in St. Charles, MO. Our company has been specializing in pharmacy packaging and supplies since 1979. Employees at Rx Systems, Inc. have ample opportunity to grow within our company. We are looking for mechanically inclined, production-minded team members interested in learning a trade and growing with our company. Must be able to work around moving parts and machinery and must be able to lift boxes and materials up to 60 lbs. ESSENTIAL DUTIES Bilingual in both English and Spanish. Assists with translation during safety meetings and training sessions to ensure clear communication for all team members. Reads job orders and helps communicate when materials are needed. Communicates with Operators, Lead, and Supervisor in a professional manner. Able to perform material changes. Assists Operators with all wash-ups and washing of plates, along with other duties associated with these processes. Assists Operator with in all startup/cleanup processes on the machine. Willing to learn/train on specified Machinery. This includes running machinery at acceptable speeds and troubleshoot mechanical/process control problems. Assists Operator with the pre-mounting of their plates. Required to pack on machinery and assist Operator with daily duties. Packs to product specifications, makes up boxes for packing finished product, and labels all boxes as needed, if applicable. Obtains approval for startup from Quality Control or Supervision. Assists in taking out trash, changing gaylords, and opening/preparing input materials when applicable. Keeps machine and work area clean. Performs all duties in a safe and efficient manner. Have the ability to differentiate between various colors and shades as part of quality control and product inspection duties. Any other duties determined by management. Attendance Attendance on-site required Candidate Requirements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Need to be able to hear on machines with multiple employees for safety reasons. Education and Experience: Prefer high school education or a GED. 1-year Flexo experience prior to hiring will be beneficial. Language skills: Must be able to communicate in English and in Spanish. Certificates and Registrations: Must pass safety control check sheet and color chart. LOTO awareness sign off sheet. Certification on pallet jacks are required. Will be required to train on the handheld scanners. Other: Must be able to use a calculator and understand concepts of basic math. Must be proficient at reading a ruler and distinguish colors. Must be familiar with basic small tools and pallet jacks. Physical demands Must be able to push, pull, kneel, reach, sit, hear, walk and see. Must be able to stand for up to 10 hours at the time. Must be able to see fine detailing in finish product. Must be able to lift up to 60 lbs on a random basis. WORK ENVIRONMENT Employees may feel vibration from machinery. Noise levels are required PPE levels on machinery, ear plugs or earmuffs required. No other negatives noted.

SRC Automotive, Inc. is a leader in the remanufacturing of engines used in the Automotive, Marine, Natural Gas & Oil and Power Systems industries. At SRC, we do things differently. Our associates take pride in their reputation as businesspeople who understand how they impact our bottom line. Their excellent technical skills - accompanied by their role as employee-owners - has become our legacy. Assembler - 1 st shift 5am to 3:30pm Monday-Thursday, with frequent overtime required on Fridays, and occasional Saturdays. Our Assemblers may work in assembly, testing, packaging, or machining areas of our shop. All work is done according to customer specifications and company processes. Engine knowledge is helpful but not required! Primary responsibilities include: Perform production duties by following written processes (work instructions) to assemble engines or engine components Works within productions processes to ensure compliance with quality standards; responsible for visual and quantifiable inspection of the final result of their process Maintains good housekeeping and safe working environment We want you! If you want to think and act like a business owner, SRC Automotive is the place for you! We look for associates who are team players and have great communication skills. Our employee-owner are proactive, uphold commitments and love to continue learning! Our employee-owners also have: Desire and ability to learn basic engine knowledge Ability to perform basic math; add and subtract numbers. Ability to use hand, air, and power tools Ability to frequently lift or move up to 50 pounds Regular attendance and satisfactory performance of the above listed duties is also essential to this position. What's in it for you? Competitive compensation package with opportunity for growth in your career; promotion from within opportunities available Affordable and comprehensive insurance on your 61 st day of employment Bonus opportunity up to 8% annually Paid Time Off Program and 11 paid Holidays 5% 401(k) match Employee Stock Ownership Plan (ESOP) 100% Tuition Reimbursement Fitness Center and Wellness Program with free mental health resources Learn about Career Development here: Growing My Career at SRC Employee-owners first, manufacturers second: We believe the best way to operate is to educate everyone on how the business works, give them a voice in saying how the company is run and provide them a stake in the financial outcome, good or bad. We do this by creating a business of businesspeople who think, act and feel like owners through education, empowerment and engagement. It's all part of our open-book management system, The Great Game of Business . If you are interested in joining our team, we would love to hear from you! Please submit an application and our HR team will reach out to you. Location: 4431 W. Calhoun, Springfield, MO 65802 5am to 3:30pm Monday-Thursday, Mandatory Overtime on Fridays.

Aerospace Assembly Technician Location: Wichita, KS, 67217 Job Description: The Aerospace Assembly Technician will be responsible for assembling and installing various components and systems in aircraft. This includes but is not limited to mechanical, electrical, and hydraulic systems. The technician will work with a team to ensure that all work is completed accurately and efficiently. Responsibilities: Read and interpret blueprints, schematics, and technical manuals Assemble and install mechanical, electrical, and hydraulic systems in aircraft Perform quality checks on completed work Collaborate with team members to ensure work is completed on time and to specifications Maintain a clean and organized work area Adhere to safety protocols and regulations Requirements: High school diploma or equivalent Previous experience in aerospace assembly or a related field Ability to read and interpret blueprints, schematics, and technical manuals Strong attention to detail Ability to work in a team environment Excellent communication skills Ability to lift up to 50 pounds Willingness to work flexible hours as needed

Come work for a company who thinks outside the box... that's where you'll find us! Beyond walls, windows, boxes and the norm. Come be a part of a team where WE ARE IN IT TO WIN IT. A team that fosters and encourages creativity, resourcefulness, promoting from within, and a work-life balance. #IITFWI **Position is on-site in Harrison, AR, Monday - Friday** The Assembler is responsible for producing quality components and finished products by accurately assembling parts and subassemblies. This role ensures that materials are prepared, assembled, inspected, and packaged in accordance with company standards and customer requirements. The Assembler plays a key role in maintaining efficient production flow, identifying defects, and ensuring a safe and organized work environment while supporting overall team productivity. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Job Purpose: Produces components by assembling parts and subassemblies. Positions or aligns components and parts, either manually or with hoists. Uses hand tools or machines to assemble parts. Cleans and maintains work area and equipment, including tools. Prepare orders by processing requests and supply orders; pulling materials; packing boxes; placing orders in shipping area. Daily duties may require winding, tacking, decaling, sealing, rolling, painting, drilling, ect. Identifying any defective items and handling them according to established procedures. Working with other members of the line or group in order to assemble products. Inventories tools, parts and supplies; contacts material handlers if supplies are needed. Other duties as assigned. Requirements Requirements Skills/Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Good communication skills. Physical fitness and strength to lift and operate heavy electrical machinery. Good hand-eye coordination. Excellent manual dexterity Must have good organizational skills. Work well as a productive member on the team. Education and Experience: High School Diploma or GED preferred but not required. Manufacturing or Production experience preferred but not required. Must be able to lift up to 30 pounds at a time. Willing to perform repetitive tasks while sitting or standing for extended periods of time.

Driven by Possibility Gates Corporation is a leading manufacturer of application-specific fluid power and power transmission solutions. At Gates, we are driven to push the boundaries of materials science to engineer products that continually exceed expectations. We don't rest on our rich heritage of innovation. We leverage it to inspire solutions that will power the next hundred years. We invest continually in R&D and technology, so our products not only outperform industry standards; they exceed our customers' demanding expectations. We invest in our people, bringing real-world experience that enables us to solve our customers' diverse challenges of today and anticipate those of tomorrow. And we are constantly expanding our product catalog and value-added service offerings to support every facet of our customers' operations. In the most extreme environments and those more familiar, Gates is there with the right product, in the right place at the right time. Whether building original equipment or maintaining products in the aftermarket, we enable companies in every industry to be more efficient, productive, and profitable. We are Gates. OVERVIEW: At Gates, we welcome challenges, celebrate hard work, and continually seek new talent to join our global company. Our Siloam Springs, Arkansas facility is looking for Hourly Production Workers. Please review below to see if this might be the right opportunity for you. The Production Workers use resources provided, such as raw materials, manufacturing equipment, tools, etc., to build, cure, process, package and ship product to customers on time and meet or exceed their expectations. QUALIFICATIONS: (Ex.: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.) REQUIRED SKILLS: Good communication skills. Able to understand and carry out oral instructions. Possess the ability to read and carry out written instructions. Observe and read instructions, gauges, dials, etc. to determine operating conditions. Ability to observe conditions to ensure their safety and the safety of fellow employees. Basic math skills required. Able to comprehend policies, procedures, and guidelines to maintain a safe working environment and a high quality product delivered on time. Must be a team-oriented individual who understands and supports the team approach to manufacturing. Possess a high level of responsibility and accountability for both themselves and their team. LEADERSHIP/SUPERVISORY RESPONSIBILITIES: This position functions as an individual contributor with no supervisory responsibilities. PHYSICAL DEMANDS: Able to stand on concrete continuously during operation. Able to bend, stoop, twist, step up and down, pushing, pulling and reaching frequently. The ability to lift and move fifty pounds (50 lbs.). Able to wear personal protective equipment as needed. Examples: protective clothing, safety glasses, safety shoes, and hearing protection. Shifts can vary from eight (8) to twelve (12) hour shifts. Overtime work schedules may be required. WORK ENVIRONMENT: The noise level in the work environment is usually moderate. Please be advised that Gates Corporation does not accept resumes from third-party recruiters. Gates Corporation is an Equal Opportunity and Affirmative Action Employer and is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of race, sex, color, religion, age, disability, pregnancy, citizenship, sexual orientation, gender identity, national origin, protected veteran status, genetic information, marital status, or any other consideration defined by law.

Triumph Foods, LLC (Triumph) is a leader in the Pork Industry, and is recognized as a top exporter of premium pork products worldwide. The Company began operations in 2006, in Saint Joseph, MO, and is producer owned. Triumph's state-of-the-art facility processes in excess of 6 million hogs each year, and features the latest food quality, safety innovations, and humane handling practices in the industry. The Company prides itself on producing the highest quality pork products found in the market today. DESCRIPTION: This position is responsible for entry level non-skilled labor, while conforming to company standards for safety, attendance, and personal conduct. This position is full of repetitive motions for up to 10 hours a day for 6 days a week. Working conditions can range from the cold side at 28 degrees and damp to the kill side at 100 degrees and humid. These jobs require the use of a knife or other hand tool. DUTIES/RESPONSIBILITIES: Applicants will be considered for any general laborer role such as Kill Floor or Cut/Conversion. Applicants that meet the minimum requirements for consideration may be contacted for an interview. REQUIREMENTS: Qualified applicants will have a minimum of 6 months of continuous work experience in the previous year. Work history must represent gainful employment, and must be verifiable. Physical Demands: The physical demands here are representative of those an employee should possess to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be required to move about the facility. The employee is required to sit; use hands to finger; handle; or feel/hold objects; reach with hands and arms; climb or balance; speak; hear taste and smell. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Must be able to climb ladders and platforms, and enter confined spaces and wear all safety equipment. Must occasionally lift and/or move up to 40 pounds or more. Work Environment: The work environment characteristics described here are representative of those an employee encounters when performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly exposed to cold/hot and/or humid conditions, climate extremes are found in all areas of the plant Frequently works near machinery with moving parts and vibration Regularly exposed to strong odors and the sight of blood Regular Exposure to cleaning and sanitation chemicals, hazardous material and waste as well as fumes or airborne particles Risk of electrical shock and vibration Noise level in the work environment is moderate but can be loud when in the production area Applications submitted that are incomplete or do not reflect education, skills & abilities within the stated minimum qualifications will not be considered in the application process. Records will be reviewed for compliance with Company policies and attendance requirements. Only those employees whose records are within the standards set by the Company will be interviewed. Disclaimer: This position description in not intended, and should not be construed to be, an exhaustive list of all responsibilities, skills, efforts or working conditions associated with this job. It is intended, however, to be an accurate reflection of the general responsibilities and requirements necessary to be successful. Triumph may, in its discretion, modify or revise the position description in order to meet the company's changing business needs. #TF

Job Description Our company, Closet Factory, is the custom storage solution authority serving the need for custom space organization throughout the home. We design, sell, manufacture, and install custom closets, home offices, garages, home theaters, pantries, bookshelves and more. Our products are of the highest quality. We have experienced substantial, long-term growth and as a result are searching for another member to add to our close-knit team of people to manufacture our products. We are looking for a motivated individual that can help us grow our manufacturing capabilities. Job Benefits: Full-time, permanent positions Year-round work Ability to cross train and move up in the company Continual Support Benefits that include medical, dental, 401K, and 401K matching. Specific requirements: Experience with basic hand tools Must be able to lift 50 lbs. Forklift experience a plus Experience with a table saw Ability to read a tape measure to 1/16" Finishing experience is a plus Experience with a drill press Team player with a positive attitude

Summit Truck Bodies is a quality manufacturer of custom designed service and lube truck bodies, is expanding its workforce due to increasing sales. If you are a motivated team player who is committed to producing a high-quality product on time and safely, we want you on our team. We are looking for a Wire Harness Assembler which is a specialist in the field of electrical engineering, focused on the intricate task of constructing wire harnesses. These assemblies consist of systematically bound wires, terminals, and connectors that play a crucial role in the streamlined transmission of electrical power and signals in our service trucks. WE OFFER A FULL BENEFITS PACKAGE FOR BENEFITS ELIGIBLE EMPLOYEES INCLUDING: * Medical, Dental, and Vision Insurance * Life (Voluntary and Employer Paid) and Disability Insurance * 401(K) with company match beginning with your first contribution * HSA and/or FSA, as applicable * Paid Time Off and Company Paid Holidays * Employee Car Discount Program ESSENTIAL DUTIES & RESPONSIBILITIES: * Ability to read electrical schematics and build harnesses to match and have the ability to test those harnesses. * Wire custom electrical systems according to vehicle specifications. * Understands schematic diagrams, technical specifications, and the properties of different wire types and connectors. * Maintain a clean and safe work environment. * Other duties as assigned by the manager. Requirements WORK ENVIRONMENT & PHYSICAL ABILITIES: * Requires frequent sitting, standing, balancing, bending or stooping for prolonged periods of time. * Manual dexterity, fine manipulation and the ability to reach with hands and arms and lift up to 50 lbs. * Must be able to operate simple to complex and heavy-duty machinery. * Normal range of hearing and vision. * Able to lift 50 pounds regularly. REQUIRED EDUCATION, EXPERIENCE, KNOWLEDGE & SKILLS: * High School Diploma or GED. * Must have a precise blend of technical knowledge, manual dexterity, and attention to detail. * Must be proficient in use of specialized tools and machinery designed for cutting, stripping, crimping, and testing wires and cables. * 1-3 years professional experience with low-voltage electrical systems. * Must be able to read and interpret wiring diagrams and vehicle schematics. * Ability to work in a fast-paced environment in a safe manner. * Excellent written and verbal communication skills. * Ability to successfully complete a General Abilities Assessment and pass a post-offer background check, physical and drug screening. #STE

TempToFT Please submit resume to ***************************** to apply. Pay Rate/Range: $15-16/hr Description: Seeking Production Workers for a local growing manufacturing facility. The Production Worker is responsible for operating and monitoring industrial machinery to ensure efficient and safe production of materials. Duties include setting up machines, performing quality checks, troubleshooting equipment issues, and maintaining a clean and organized work area. Operators must follow all safety protocols and production guidelines to meet company standards for quality and output. We are hiring immediately for these Production Worker roles, please apply today! Job Requirements: High school diploma or GED Previous manufacturing or machine operation experience preferred Ability to read and interpret production instructions and safety documents Strong attention to detail and mechanical aptitude Ability to lift up to 50 lbs and stand for extended periods Flexibility to work various shifts as needed Shift/Schedule: Sunday-Saturday, 7:00am-7:00pm or 7:00pm-7:00am with a schedule of 7 days on, 7 days off The Arnold Group is an Equal Opportunity Employer (EOE) About Us: Looking for a job that fits your skills and goals? Since 1979, The Arnold Group (TAG) has been helping job seekers find the right opportunities-whether it's temporary work, a long-term career, or something in between. We're here to connect you with the right fit and provide the support you need to succeed. Let's find your next opportunity together… discover how we can help! The Arnold Group

Full-time Description Summit Truck Bodies is a quality manufacturer of custom designed service and lube truck bodies, is expanding its workforce due to increasing sales. If you are a motivated team player who is committed to producing a high-quality product on time and safely, we want you on our team. We are looking for a Wire Harness Assembler which is a specialist in the field of electrical engineering, focused on the intricate task of constructing wire harnesses. These assemblies consist of systematically bound wires, terminals, and connectors that play a crucial role in the streamlined transmission of electrical power and signals in our service trucks. WE OFFER A FULL BENEFITS PACKAGE FOR BENEFITS ELIGIBLE EMPLOYEES INCLUDING: Medical, Dental, and Vision Insurance Life (Voluntary and Employer Paid) and Disability Insurance 401(K) with company match beginning with your first contribution HSA and/or FSA, as applicable Paid Time Off and Company Paid Holidays Employee Car Discount Program ESSENTIAL DUTIES & RESPONSIBILITIES: Ability to read electrical schematics and build harnesses to match and have the ability to test those harnesses. Wire custom electrical systems according to vehicle specifications. Understands schematic diagrams, technical specifications, and the properties of different wire types and connectors. Maintain a clean and safe work environment. Other duties as assigned by the manager. Requirements WORK ENVIRONMENT & PHYSICAL ABILITIES: Requires frequent sitting, standing, balancing, bending or stooping for prolonged periods of time. Manual dexterity, fine manipulation and the ability to reach with hands and arms and lift up to 50 lbs. Must be able to operate simple to complex and heavy-duty machinery. Normal range of hearing and vision. Able to lift 50 pounds regularly. REQUIRED EDUCATION, EXPERIENCE, KNOWLEDGE & SKILLS: High School Diploma or GED. Must have a precise blend of technical knowledge, manual dexterity, and attention to detail. Must be proficient in use of specialized tools and machinery designed for cutting, stripping, crimping, and testing wires and cables. 1-3 years professional experience with low-voltage electrical systems. Must be able to read and interpret wiring diagrams and vehicle schematics. Ability to work in a fast-paced environment in a safe manner. Excellent written and verbal communication skills. Ability to successfully complete a General Abilities Assessment and pass a post-offer background check, physical and drug screening. #STE

Job DescriptionDescription: Summit Truck Bodies is a quality manufacturer of custom designed service and lube truck bodies, is expanding its workforce due to increasing sales. If you are a motivated team player who is committed to producing a high-quality product on time and safely, we want you on our team. We are looking for a Wire Harness Assembler which is a specialist in the field of electrical engineering, focused on the intricate task of constructing wire harnesses. These assemblies consist of systematically bound wires, terminals, and connectors that play a crucial role in the streamlined transmission of electrical power and signals in our service trucks. WE OFFER A FULL BENEFITS PACKAGE FOR BENEFITS ELIGIBLE EMPLOYEES INCLUDING: Medical, Dental, and Vision Insurance Life (Voluntary and Employer Paid) and Disability Insurance 401(K) with company match beginning with your first contribution HSA and/or FSA, as applicable Paid Time Off and Company Paid Holidays Employee Car Discount Program ESSENTIAL DUTIES & RESPONSIBILITIES: Ability to read electrical schematics and build harnesses to match and have the ability to test those harnesses. Wire custom electrical systems according to vehicle specifications. Understands schematic diagrams, technical specifications, and the properties of different wire types and connectors. Maintain a clean and safe work environment. Other duties as assigned by the manager. Requirements: WORK ENVIRONMENT & PHYSICAL ABILITIES: Requires frequent sitting, standing, balancing, bending or stooping for prolonged periods of time. Manual dexterity, fine manipulation and the ability to reach with hands and arms and lift up to 50 lbs. Must be able to operate simple to complex and heavy-duty machinery. Normal range of hearing and vision. Able to lift 50 pounds regularly. REQUIRED EDUCATION, EXPERIENCE, KNOWLEDGE & SKILLS: High School Diploma or GED. Must have a precise blend of technical knowledge, manual dexterity, and attention to detail. Must be proficient in use of specialized tools and machinery designed for cutting, stripping, crimping, and testing wires and cables. 1-3 years professional experience with low-voltage electrical systems. Must be able to read and interpret wiring diagrams and vehicle schematics. Ability to work in a fast-paced environment in a safe manner. Excellent written and verbal communication skills. Ability to successfully complete a General Abilities Assessment and pass a post-offer background check, physical and drug screening. #STE

Job DescriptionMidtown Tulsa Shop seeking a Wiring Harness AssemblerJob SummaryThe Assembler II is responsible for constructing prototype and limited production wiring harnesses. This position requires the ability to read and interpret wiring schematics, perform precise electrical connections, and ensure all work meets established quality and safety standards. The ideal candidate is detail-oriented, dependable, and experienced with hand tools and basic electrical wiring. Essential Duties and Responsibilities Construct wiring harnesses for prototypes and limited production applications. Read, interpret, and follow wiring schematics, blueprints, diagrams, engineering drawings, bills of material, and assembly instructions to accurately assemble products. Understand how wiring harnesses integrate with overall system operations. Make proper electrical connections and select appropriate connectors and components. Perform quality checks to ensure products meet required standards. Accurately distinguish wire colors and follow detailed assembly procedures. Use hand tools safely and effectively during the assembly process. Maintain clear communication with team members and supervisors through both written and verbal channels. Adhere to all safety procedures and wear required personal protective equipment (PPE). Maintain a clean and organized work environment. Perform other related duties as requested or assigned. Qualifications and Requirements High school diploma or GED required. Mechanical and/or wiring knowledge is required. Ability to read and interpret technical instructions, wiring diagrams, blueprints, and manuals. Strong organizational skills and the ability to multitask effectively. Previous experience working with or assembling wiring harnesses preferred. Experience using hand tools required. Reliable, detail-oriented, and professional demeanor. Ability to stand for extended periods and perform physical tasks including reaching, bending, climbing, lifting up to 50 lbs, fine finger manipulation, gripping, and squeezing. Training Requirements General Safety Harassment Prevention Quality System Awareness ISO Standards Ethics and Workplace Conduct Work Environment Warehouse or production environment. May involve exposure to odors, noise, dust, heat, cold, or chemicals. Appropriate PPE, including eye protection (goggles, face shields, or safety glasses), must be worn at all times. Schedule - Monday through Friday, 8:00 AM to 5:00 PM, with overtime as required. Pay - DOE $20-23/hr Abundant Solutions5151 S Mingo RdSuite DTulsa OK 74146Send resumes to ***********************

Job Description HIRING LEVELS I & II Pay rates depend on years of experience and training Hiring ranging from 1-4 years of experience Job Summary: We are looking for a dedicated Aircraft Structural Mechanic to join our maintenance team. The ideal candidate will be responsible for inspecting, repairing, and modifying aircraft structures, ensuring compliance with safety regulations and manufacturer specifications. Key Responsibilities: Inspect, repair, and replace aircraft structural components, including wings, fuselage, and tail sections. Perform routine and non-routine maintenance on aircraft structures and systems. Use precision measuring tools and diagnostic equipment to assess structural integrity. Interpret blueprints, technical manuals, and engineering specifications to carry out repairs. Collaborate with engineers and other mechanics to address complex structural issues. Document maintenance activities and maintain accurate records in compliance with regulatory standards. Adhere to safety protocols and maintain a clean and organized work environment. Qualifications: High school diploma or equivalent; Proven experience as an aircraft structural mechanic or in a similar role. Strong understanding of aircraft structural systems and materials. Proficiency in using hand tools, power tools, and specialized equipment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Strong communication skills. Physical Requirements: Ability to lift heavy objects and work in various physical positions. Comfortable working in confined spaces and at heights. Application Process: Interested candidates should submit their resume Job Types: Full-time, Contract Pay: $21.00 - $26 per hour Expected hours: 40 per week Benefits: Dental insurance Health insurance Vision insurance Schedule: 10 hour shift 4x10 5x8 8 hour shift Day shift Evening shift Monday to Friday Weekends only Company DescriptionTEL Staffing & HR, or TEL (pronounced ‘tell'), is the leading full-service PEO (Professional Employer Organization) on the Gulf Coast today. TEL Staffing specializes in matching individuals with quality Employers. We take your skills, passion, and goals into account, in order to find you rewarding and challenging opportunities. For over 15 years, TEL Staffing & HR has helped hundreds of hard-working business owners simplify their lives and maximize their profits by providing them with the very best in human resource (HR) solutions, workers' compensation insurance protection, payroll, and tax processing services. We also provide our customers with the ‘right fit' when it comes to health care, employee benefits, life insurance, supplemental insurance, professional staffing solutions, and financial investment strategies through our personalized care and world-class strategic partnerships.Company DescriptionTEL Staffing & HR, or TEL (pronounced ‘tell'), is the leading full-service PEO (Professional Employer Organization) on the Gulf Coast today.\r \r TEL Staffing specializes in matching individuals with quality Employers. We take your skills, passion, and goals into account, in order to find you rewarding and challenging opportunities. \r \r For over 15 years, TEL Staffing & HR has helped hundreds of hard-working business owners simplify their lives and maximize their profits by providing them with the very best in human resource (HR) solutions, workers' compensation insurance protection, payroll, and tax processing services.\r \r We also provide our customers with the ‘right fit' when it comes to health care, employee benefits, life insurance, supplemental insurance, professional staffing solutions, and financial investment strategies through our personalized care and world-class strategic partnerships.

Assembly Positions Available Looking for a stable, hands-on job with weekly pay? We are hiring Assembly Workers - start as soon as this week! Key Responsibilities: Assemble products or parts accurately and efficiently Use hand and power tools safely Maintain a clean and organized work area Follow all safety procedures and company policies Requirements: Tool knowledge and tape measurer knowledge Previous experience in assembly or manufacturing Ability to stand for long periods and lift up to 50 lbs Hours: Multiple Shifts Available - Must be able to work mandatory OT Pay: $17+ Background check and drug screen**