Computer operator jobs in Stockton, CA - 181 jobs

Suffolk is a national enterprise that builds, innovates, and invests. We provide value across the entire project lifecycle through our core construction management services and complementary business lines in real estate investment, design, self-perform construction, and technology start-up investment (Suffolk Technologies). By integrating data, artificial intelligence, and advanced technology through our Seamless Platform, we connect design, construction, and operations to deliver smarter, more predictable results and redefine how America builds. Suffolk - America's Contractor - is a national company with more than $8 billion in annual revenue, 3,000 employees, and 17 offices, including Boston (headquarters), New York City, Miami, West Palm Beach, Tampa, Estero, Dallas, Los Angeles, San Francisco, San Diego, Las Vegas, Herndon, U.S. Virgin Islands, and other key markets. Suffolk manages some of the most complex and transformative projects in the country, serving clients across healthcare, life sciences, education, gaming, aviation, transportation, government, mission critical, and commercial sectors. Suffolk is privately held and is led by founder, chairman and CEO John Fish. Suffolk is ranked #8 on ENR's list of “Top CM-at-Risk Contractors.” For more information, visit *************** and follow Suffolk on Facebook, Twitter, LinkedIn, YouTube, and Instagram. Position: Suffolk is currently seeking an Energy Marshall to implement learning, provide consistency, and drive rigor into energy isolation and electrical safety programs. Responsibilities: Reviewing the Electrical Energization Safety Program with the electrical contractor and commissioning authority Involvement with all stored energy systems - gas, water, steam, air. Organizing and scheduling Pre-Energization meetings Confirming individuals working on energized / de-energized equipment are Qualified Work based on NFPA 70E, OSHA, or an accepted qualified electrical safety training standard. Delivering a project specific Electrical Safety Orientation to employees who will be working on energized or de-energized equipment Reviewing the electrician's LOTO plan and verifying it is accurate and managed properly. Reviewing electrician and vendor AHA's. Confirming receipt of the approved coordination study and all arc flash labels have been applied to the equipment. Tracking and confirming all required QA/QC is complete and documentation has been submitted. Reviewing the daily Pre-Task Plan for energization activities. Implementing adequate communication to the project team that identifies daily high-risk activities, energized equipment and spaces, barriers, and off-limit spaces. Confirming all pre-energization steps have been completed. Conducting pre-energization daily walks with the electrician and project stakeholders. Performing end-of-day walks for electrical equipment to confirm all systems are secure. Confirming adherence to the LOTO plan and isolation requirements. Confirming adequate signage and barriers are installed for electrical rooms and spaces with energized equipment. Confirming an adequate access control plan is in place for electrical rooms and spaces with energized equipment. Qualifications: BA/BS + 5 years of related experience or demonstrated equivalency of experience and/or education Able to understand the safe installation of electrical equipment and various voltages, equipment types, and AC/DC systems Knowledge of pressurized mechanical lines, compressed gas and air. Experience in construction and electrical commissioning standards and practices. Experience communicating complex technical solutions and concepts to engineers and non-engineers. Ensure audit site practices against written standards as part of assurance role. Ability to Interpret line drawings and system redundancies to ensure design of LOTO systems are 100% effective and in compliance with customer standards. While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking. Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

WELCOME TO COMPTECH Good people. Dedicated People. Hard-working people. CompTech is a service-oriented program management and technical company working to build lasting relationships with small and large companies, municipalities, and Government agencies. Headquartered in Dayton, OH, our clients nationwide are provided with services in client-focused practice areas resulting in solutions to organizational challenges. Job Description Job Title: Computer Operator Location: Tracy, CA (on-site) Supporting: The Defense Logistics Agency (DLA) **Secret Security Clearance** Overview CompTech is seeking a qualified Computer Operator to support the Defense Logistics Agency (DLA). The ideal candidate will assist in the technical operation and testing of fully integrated computer-based systems in a supervised environment. This position requires local travel using personal vehicle, company van, cart or other motorized vehicle. Scope of Work Key responsibilities include: Ultimate accountability for ensuring customer satisfaction at every level. Cultivate collaborative relationships with peers and leadership in a team focused environment, always communicating effectively and displaying diplomacy. Proven ability to effectively manage and prioritize a diverse workload of assigned service tickets. Flexible, with the ability to seamlessly transition from daily operations to project actions, and vice-versa. Demonstrated ability to quickly adapt to new policies and evolving technologies within this dynamic technical environment. Adept at interpreting and adhering to guidance and Standard Operating Procedures (SOPs) provided by contract and government leadership. Proficiency in operating a diverse range of system components, including hardware, software, and mass storage technology. Capability, under supervision, to operate communications-computer systems, as well as install, implement, maintain, and optimize operating systems, disk and tape management systems, and computer operations automation software. Anticipates problems, identifies deviations and acts through resolution. Perform other duties as required. Knowledge, Skills, and Certification Requirements: Excellent interpersonal and communication skills One (1) year of Help Desk or Deskside Support experience DLA CE Cert IA Role/Function: Help Desk Tier II & III - may be obtained upon hire Security+ CE Security Clearance Requirements: Secret Salary: $55k-60k Equal Employment Opportunity CompTech is committed to building a diverse and inclusive environment in which we recognize and value each other's differences as well as fostering a culture that promotes its core values: Commitment, Innovation, and Customer Satisfaction. As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran. If you require assistance or an accommodation due to a disability, please call Human Resources at ************** or email *****************************. A CompTech associate will respond to your message as soon as reasonably possible.

IN A NUTSHELL Sciens Building Solutions seeks a CAD Operator responsible for the drafting of low voltage systems as designed by others. This position is responsible for layout and drafting of systems as represented by Sciens and is responsible for the accuracy and timeliness of all associated jobs. Ideal candidates will be AutoCAD-trained and have on-the-job experience as it relates to laying out and drafting various projects. The CAD Operator applies engineering principles to every set of drawings to meet the customers' requirements; ensures the system drawings are laid out in accordance with the project specifications and direction provided from system designers; interfaces with project managers and sales to support their various needs. WHAT YOU'LL BE DOING (and doing well!) * Lay out and draft systems as directed by system designers and engineers. Participate in the review process with design engineer team members, as requested by management. * Using software such as AutoCAD to develop floor plans, riser diagrams, schematics, system power calculations, and control panel layouts. * Follow all established design and drafting standards. * Follow all Sciens policies and procedures during daily work activities. * Work independently or with others as a team to complete all tasks and related drafting functions. Routinely work with sales and project managers to ensure the most efficient designs while maintaining the highest quality standards. * Assist and provide feedback to designers, sales team, and project managers for organizing, planning, and prioritizing work. * Comply with industry standard procedures and Sciens safety programs/policies. WHAT WE LIKE ABOUT YOU * Two to five years of experience as a drafter using AutoCAD. * Strong working knowledge of AutoCAD and other software programs required to perform job. * Ability to read, interpret, and update system designs prepared by others. * Strong verbal and written communication skills. * Strong time management skills and the ability to multi-task. * Ability to work under tight deadlines and with a sense of urgency. * Ability to work independently with minimal supervision. * Excellent organizational and communication skills. * Valid driver's license & reliable transportation. WHAT WE'RE BRINGING TO THE TABLE * Competitive salary based on qualifications. * Paid time off and holidays. * 401(k) matching. * Short term and long-term disability. * Medical, dental, and vision plans with options. * Life insurance. * Professional career development opportunities. * Tuition reimbursement. Starting at $31/hr, DOE

IN A NUTSHELL Sciens Building Solutions seeks a CAD Operator responsible for the drafting of low voltage systems as designed by others. This position is responsible for layout and drafting of systems as represented by Sciens and is responsible for the accuracy and timeliness of all associated jobs. Ideal candidates will be AutoCAD-trained and have on-the-job experience as it relates to laying out and drafting various projects. The CAD Operator applies engineering principles to every set of drawings to meet the customers' requirements; ensures the system drawings are laid out in accordance with the project specifications and direction provided from system designers; interfaces with project managers and sales to support their various needs. WHAT YOU'LL BE DOING (and doing well!) Lay out and draft systems as directed by system designers and engineers. Participate in the review process with design engineer team members, as requested by management. Using software such as AutoCAD to develop floor plans, riser diagrams, schematics, system power calculations, and control panel layouts. Follow all established design and drafting standards. Follow all Sciens policies and procedures during daily work activities. Work independently or with others as a team to complete all tasks and related drafting functions. Routinely work with sales and project managers to ensure the most efficient designs while maintaining the highest quality standards. Assist and provide feedback to designers, sales team, and project managers for organizing, planning, and prioritizing work. Comply with industry standard procedures and Sciens safety programs/policies. WHAT WE LIKE ABOUT YOU Two to five years of experience as a drafter using AutoCAD. Strong working knowledge of AutoCAD and other software programs required to perform job. Ability to read, interpret, and update system designs prepared by others. Strong verbal and written communication skills. Strong time management skills and the ability to multi-task. Ability to work under tight deadlines and with a sense of urgency. Ability to work independently with minimal supervision. Excellent organizational and communication skills. Valid driver's license & reliable transportation. WHAT WE'RE BRINGING TO THE TABLE Competitive salary based on qualifications. Paid time off and holidays. 401(k) matching. Short term and long-term disability. Medical, dental, and vision plans with options. Life insurance. Professional career development opportunities. Tuition reimbursement. Starting at $31/hr, DOE

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: Competitive Starting Pay Paid Training Global Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will do: Provide CAD Drafting and design support for design department. Prepare technical drawings and documentation for fire alarm system installations. (using provided tools and libraries). How you will do it: Work with a designer to prepare CAD drawings based on project requirements. Drawings include floorplans, calculations, details and other diagrams as needed Support internal customer by addressing questions and other support requests Interact with other team members to accomplish tasks, achieve common goals, solve problems, resolve conflicts and measure achievements Use department processes and goals when planning self-directed work activities Complete administrative tasks What we look for: Required Skilled in use of AutoCAD versions 2018 and higher Working knowledge of MS Office Site (Word, Excel, PowerPoint and Outlook) Ability to work with direction, independently or as a member of a team Ability to organize and perform multiple assignments and responsibilities Must be able to meet deadlines while maintaining a positive attitude Effective and professional communication skills including the ability to effectively communicate with internal customers Preferred: Knowledge of fire alarm and security system principles a plus Basic knowledge of low voltage electrical system schematics and diagrams a plus Working knowledge of REVIT/BIM a plus HIRING HOURLY RANGE: $33.65 - $43.23 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: Competitive Starting Pay Paid Training Global Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will do: Provide CAD Drafting and design support for design department. Prepare technical drawings and documentation for fire alarm system installations. (using provided tools and libraries). How you will do it: Work with a designer to prepare CAD drawings based on project requirements. Drawings include floorplans, calculations, details and other diagrams as needed Support internal customer by addressing questions and other support requests Interact with other team members to accomplish tasks, achieve common goals, solve problems, resolve conflicts and measure achievements Use department processes and goals when planning self-directed work activities Complete administrative tasks What we look for: Required Skilled in use of AutoCAD versions 2018 and higher Working knowledge of MS Office Site (Word, Excel, PowerPoint and Outlook) Ability to work with direction, independently or as a member of a team Ability to organize and perform multiple assignments and responsibilities Must be able to meet deadlines while maintaining a positive attitude Effective and professional communication skills including the ability to effectively communicate with internal customers Preferred: Knowledge of fire alarm and security system principles a plus Basic knowledge of low voltage electrical system schematics and diagrams a plus Working knowledge of REVIT/BIM a plus HIRING HOURLY RANGE: $33.65 - $43.23 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description Responsibilities: This operator prepares complete sets of complex drawings or computer models that include multiple views, detail drawings, and assembly drawings. Drawings or models include complex design features that require considerable drafting skill to visualize and portray. Assignments regularly require the use of mathematical formulas to draw land contours or to compute weights, center of gravity, load capacities, dimensions, quantities of material, etc. Works from sketches, computer models, and verbal information supplied by an engineer, architect, or designer to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignments. This operator selects required information from computer programs, and internet sites, precedents, manufacturers' catalogs, and technical guides. This operator independently resolves most of the problems encountered. Supervisor or design originator may suggest methods of approach or provide advice on unusually difficult problems. Education/Experience/Skills: U.S. Citizenship and Active DoD Secret Clearance. Must have certification/degree in AutoCAD. Minimum of 5 years' work drafting with AutoCAD in an engineering or similar environment. Proficiency with Microsoft Office Suite. Proficiency in use of AutoCAD software, Civil 3D experience is desired. Experience with gravity and pressure networks desired. Experience with feature line grading and corridors desired. Must have ability to stand, walk, sit, use both hands, and carry/lift to 50 lbs. Must be able to execute installation/lifting of heavy equipment and use of/climbing ladders. $45 - $47 Hr. What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck! Powered by JazzHR ce49TGwlGN

At Kelly Services, we work with the best. Our clients include 99 of the Fortune 100TM companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. Job Description Our client, a major healthcare provider, is currently seeking Computer Operators for our client's Sacramento, CA location. In addition to working with the world's most recognized and trusted name in staffing, Kelly employees can expect: Competitive pay Paid holidays Year-end bonus program Recognition and incentive programs Access to continuing education via the Kelly Learning Center Pay $17.00 per hour Schedule: 40 hour work week. Duration: 2- 3 months Anticipated start date: 10/3/16 SUMMARY Responsible for setting up and operating computer equipment in the data processing area in order to contribute to the success of daily data operations. DUTIES Sets up and operates computer peripheral devices, such as printers; monitors the system for error messages and ensures efficiency. Performs routine preventative maintenance on equipment according to user manuals and installation standards. Submits job requests based on appropriate computer schedule. Observes operation of the computer to detect errors, machine stoppage or faulty output; makes necessary adjustments or notifies supervisor of unusual or difficult problems with computer operations. May perform the role of Data Entry Operator, keying data and basic maintenance. Develops and implements new processes and procedures when necessary. Maintains an organized work area to help ensure that computer room remains clean and to help prevent work related injuries. Must be able to work overtime when necessary. Performs related duties as assigned. EXPERIENCE/EDUCATION Ability to communicate effectively both orally and in writing Good interpersonal skills Ability to consistently meet deadlines Strong organizational skills; attention to detail Ability to implement processes resulting in satisfactory audit practices Strong computer skills in order to operate effectively with company systems and programs; knowledge of AS400, Microsoft Word, Excel and Outlook Working knowledge of data processing equipment and peripheral devices such as printers, copiers, hand held and order entry units. Qualifications Ability to communicate effectively both orally and in writing Good interpersonal skills Ability to consistently meet deadlines Strong organizational skills; attention to detail Ability to implement processes resulting in satisfactory audit practices Strong computer skills in order to operate effectively with company systems and programs; knowledge of AS400, Microsoft Word, Excel and Outlook Working knowledge of data processing equipment and peripheral devices such as printers, copiers, hand held and order entry units. Additional Information By working with Kelly in this role, you would be eligible for: A competitive hourly pay rate with weekly checks Online continuing education via the Kelly Learning Center Several employee discounts And more!

Clayton is a vertically integrated housing company that builds, sells, and insures affordable housing. Our commitment to creating a World Class Customer Experience is unparalleled in the housing industry and we believe it begins with a World Class Team Member Experience. From entry-level to more experienced positions, we're actively recruiting individuals who are passionate, positive, and eager to learn. We then equip you for success, whether you're in the office, in the field, or on the floor. As a member of our team you'll enjoy excellent benefits, opportunities for growth, and an encouraging culture that supports work / life balance. We are seeking a highly skilled and detail-oriented Lead AutoCAD Drafter to oversee drafting operations for our manufactured housing division. This role is responsible for producing and managing accurate construction drawings, coordinating with cross- functional teams, and ensuring compliance with industry standards and building codes. The ideal candidate will have extensive experience in AutoCAD, modular or manufactured housing design, and team leadership. This role will report to our Engineering manager. Key Responsibilities: * Lead the drafting team in the creation of detailed construction documents for manufactured homes. * Develop and maintain standardized drawing templates and CAD libraries. * Ensure all drawings comply with HUD, IRC, and other applicable codes and regulations. * Collaborate with engineering, production, and project management teams to ensure design feasibility and accuracy. * Review and approve drawings before submission to regulatory agencies or production. * Train and mentor junior drafters, providing guidance and quality control. * Manage drawing revisions and document control processes. * Participate in design reviews and provide technical input to improve product quality and efficiency. * Coordinate with suppliers and vendors for integration of third-party components into designs. Qualifications: * Associate's or bachelor's degree in Drafting, Architecture, Engineering, or related field. * 5+ years of experience in AutoCAD drafting, with at least 2 years in manufactured or modular housing. * Strong knowledge of building codes, especially HUD and IRC. * Proficiency in AutoCAD (2D and 3D); Revit or other BIM software is a plus. * Experience with structural, electrical, and plumbing layouts. * Excellent organizational and communication skills. * Ability to manage multiple projects and meet deadlines. * Leadership experience in a drafting or design team environment. Preferred Skills: * Familiarity with manufacturing processes and materials used in modular construction. * Experience with permitting and regulatory submittals. * Knowledge of Lean principles or continuous improvement methodologies. Why Clayton? Full-time team members have the flexibility to create their own health, dental, and vision benefits package. Clayton provides competitive 401K programs, including investment options and company matching for full and part time employees after one year to help our team members achieve their financial goals. Additional benefits include paid parental leave, tuition reimbursement, Employee Assistance Programs, and more. As part of Clayton's commitment to Opening Doors to a Better Life, Clayton is now providing paid time for Team Members to volunteer to causes that are meaningful to them through the Clayton Impact program. At Clayton, we encourage holistic wellness with physical, nutritional, social, financial, spiritual and occupational programs available online or in-person for team members. Clayton is committed to a diverse and inclusive workplace. Clayton is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Chosen final applicant must pass a pre-employment, post offer fit for duty assessment, drug test and background check. Starting range for this role is $33-$43 per hour DOE. Why Clayton? Full-time team members have the flexibility to create their own health, dental, and vision benefits package. Clayton provides competitive 401K programs, including investment options and company matching for full and part time employees after one year to help our team members achieve their financial goals. Additional benefits include paid parental leave, tuition reimbursement, Employee Assistance Programs, and more. As part of Clayton's commitment to Opening Doors to a Better Life, Clayton is now providing paid time for Team Members to volunteer to causes that are meaningful to them through the Clayton Impact program. Clayton is proud to have earned spots on the following Forbes lists: America's Best Employers, America's Best Employers by State, Best Employers for Diversity, Best Employers for Women. At Clayton, we encourage holistic wellness with physical, nutritional, social, financial, spiritual and occupational programs available online or in-person for team members. Clayton is committed to a diverse and inclusive workplace. Clayton is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. Business Unit - B00018 Clayton Manufacturing

This position is responsible for producing CAD drawings in accordance with company standards, client requirements, and project deadlines. ESSENTIAL FUNCTIONS: Develop computer generated drawings utilizing AutoCAD and Revit: plans, sections, details, schedules, and diagrams Computer model 2D and 3D HVAC (duct and pipe), plumbing, process pipe, controls, and electrical systems Research and recommend resolutions to drawing, spatial conflicts, and interferences Ensure that work complies with applicable specifications and CAD standards Attend meetings with client or Project Management/Engineering representatives when necessary to coordinate the design of the project Train and assist other CAD operators and engineers on how to use the drafting software and ACCO CAD standards Plot and assemble drawings, reports and other project documents Arrange for and expedite outside reproduction services Manage time to meet project schedules and task deadlines Effectively and professionally communicate with colleagues and project team members Other duties as assigned by Manager or Supervisor EDUCATION AND EXPERIENCE: Minimum 1 year CAD work experience Proficiency in AutoCAD, Revit, or similar drafting software ACCO COMPETENCIES: Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. PHYSICAL REQUIREMENTS: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) The employee may regularly lift and /or move up to 10 pounds, and occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include Close vision and Distance vision. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is regularly required to walk and sit; climb or balance and stoop, kneel, crouch, or crawl (for purposes of assisting with project job walks and site inspections). The employee is occasionally required to reach above shoulder height to access storage cabinets and shelves. HOURS: Monday through Friday beginning between 6:00 am and 7:00 am and ending between 4:00 pm and 5:00 pm, with one hour for lunch. Eight hours per day is required, and occasional overtime may be necessary due to business needs. TRAVEL: O - 5% of the time to and from the assigned office location to regional branch offices and/or to project/customer site(s). COMPETITIVE WAGES: $26.33 to $36.15 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-MM1

Job Description The employee shall provide daily program support and operation of the NAVWAR/NIWC Pacific Message Center that supports 14 other Command units. The employee shall: Provide Naval Messaging support to all supported commands Maintain Message Center Defense Messaging System (DMDS)/and C2OIX Have knowledge of naval message writing format Track, test, and implement all messages and maintain profiler database for additions, deletions, and modifications to ensure timely and accurate delivery of all incoming and outgoing messages Prepare routine unclassified and classified messages for electronic delivery, and provide appropriate handling for special category (SPECAT), NATO, and Limited Distribution (LIMDIS) information Able to work hours such as 9:30am to 5:30pm Qualifications: 1+ years of experience as message and administrative support in a DoD environment Experience with Microsoft Office, including Outlook, Word, Excel, and PowerPoint Ability to communicate effectively with government and contractor personnel Familiar with Military protocol Must have ACTIVE Security clearance HS diploma or GED

Serves as an Information Assurance and Cloud computing SME with regards to Certification and Accreditation (C&A) and a broad coverage of the application of the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) standards and guidance as outlined in the NIST Special Publication(s) (SP) 800-53 and 800-37 (Current versions). **Primary Duties and Responsibilities** + Google Cloud Platform (GCP) Service Management + The CCS shall maintain current certification as a Certified Cloud Security Professional. Possesses the ability to work independently with substantial cloud computing security knowledge. + The assessor must have the essential skillsets to identify, manage and resolve cloud computing security risk and implement "best practices" as applied within a cloud environment (across all of the different deployment and service models, and derivatives). **Other Duties and Responsibilities** + Investigates computer and information security incidents to determine extent of compromise to national security information and automated information systems. + Defines security objectives and system-level performance requirements. + Researches and stays abreast of tools, techniques, countermeasures, and trends in computer network vulnerabilities. + Configures and validates secure systems, tests security products/systems to detect computer and information security weaknesses. + Maintains the computer and information security incident, damage and threat assessment programs. + Responsible for the formal Security Test and Evaluation (ST&E) required by each government accrediting authority through pre-test preparations, participation in the tests, analysis of the results and preparation of required reports. + Involved in the periodic conduct of a review of each system's audits and monitors corrective actions until all actions are closed. + Designs, develops, or recommends integrated system solutions ensuring proprietary/confidential data and systems are protected. + Involved in the establishment of strict program control processes to ensure mitigation of risks and supports obtaining certification and + accreditation of systems. + Reviews processes and security protocols and makes recommendations for increased cyber security protection. **Minimum Qualifications** + Bachelor's Degree in Computer Science or a related field. + The CCS must be well versed in FedRAMP assessment methodology of security and privacy controls deployed in cloud information systems to include six (6) domain areas. The six domains include: + Architectural Concepts & Design Requirements + Cloud Data Security + Cloud Platform & Infrastructure Security + Cloud Application Security + Operations + Legal & Compliance Minimum Qualifications: + Five (5) years of relevant C&A experience; Risk Management Framework (RMF) and NIST C&A experience + DOD IA experience + Experience in assessing IA Controls and conducting C&A reviews for large, complex Information systems **Security Clearance** + Active Secret level clearance + Sensitivity Level: IT-I Critical Sensitive **Certifications:** + Computing Environment: IAT II or IAT III (Security+ or similar) + 01-M Baseline Certification: One of the following Azure or AWS cloud-based certification per DLA Approved CE list + AWS Certified Security - Specialty + AWS Certified Solutions Architect - Associate AWS Certified Solutions Architect - Professional Microsoft Certified: Azure Administrator Associate + Microsoft Certified: Azure Solutions Architect Expert Microsoft Certified Azure Security Engineer Associate **Other Job Specific Skills** + Must be able to communicate effectively and clearly present technical approaches and findings. + Exercises a limited degree of latitude in determining technical objectives of assignments. + Excellent attention to detail. + Must be able to balance multiple tasks simultaneously. + Advanced knowledge of encryption, vulnerability assessment, penetration testing, cyber forensics, intrusion detection, and incident response and remediation. **Compensation Ranges** Compensation ranges for ASM Research positions vary depending on multiple factors; including but not limited to, location, skill set, level of education, certifications, client requirements, contract-specific affordability, government clearance and investigation level, and years of experience. The compensation displayed for this role is a general guideline based on these factors and is unique to each role. Monetary compensation is one component of ASM's overall compensation and benefits package for employees. **EEO Requirements** It is the policy of ASM that an individual's race, color, religion, sex, disability, age, sexual orientation or national origin are not and will not be considered in any personnel or management decisions. We affirm our commitment to these fundamental policies. All recruiting, hiring, training, and promoting for all job classifications is done without regard to race, color, religion, sex, disability, or age. All decisions on employment are made to abide by the principle of equal employment. Physical Requirements The physical requirements described in "Knowledge, Skills and Abilities" above are representative of those which must be met by an employee to successfully perform the primary functions of this job. (For example, "light office duties' or "lifting up to 50 pounds" or "some travel" required.) Reasonable accommodations may be made to enable individuals with qualifying disabilities, who are otherwise qualified, to perform the primary functions. **Disclaimer** The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. $80,200 -$142K EEO Requirements It is the policy of ASM that an individual's race, color, religion, sex, disability, age, gender identity, veteran status, sexual orientation or national origin are not and will not be considered in any personnel or management decisions. We affirm our commitment to these fundamental policies. All recruiting, hiring, training, and promoting for all job classifications is done without regard to race, color, religion, sex, veteran status, disability, gender identity, or age. All decisions on employment are made to abide by the principle of equal employment.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

The Airborne Systems Operator plays a key role in the Field Operations workflow capturing data and imagery for company and customer requirements. Accomplishing operations, system installation, preflight / postflight inspections, maintenance, and limited repair effort for airborne sensor systems and GPS instruments on airborne platforms. This is a field-based position that will work remotely when not accomplishing company or customer requirements. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Operating airborne sensor platforms in Electric Utility environment Record and update flight logs and daily reports Monitor the quality of collected data Routine maintenance and troubleshooting of in-flight equipment Pre-flight / Post-flight, check navigation trajectories to ensure data coverage Participate in the quality management system, by working to document processes and procedures, plus offering recommendations on improvement opportunities Troubleshoot & make limited system repairs Follow & help improve best practices for troubleshooting of integrated systems. Integration, tuning and testing of optical devices. Operation of proprietary software to debug, tune, and test complex electromechanical systems. Work to deadlines to meet delivery dates for both internal and external customers. Interact with other departments to resolve problems and provide continuous improvement to reflect operational results and goals. Field Support for system installation/calibration, customer training and program/process development. Continually improve the companies process for system specification, configuration control and documentation. Minimum Qualifications (Knowledge, Skills, and Abilities) Familiar with troubleshooting techniques and ability to read technical drawings, data sheets and schematics. Strong and professional customer relations skills. Ability to work within a Microsoft Office environment including knowledge of Windows, Excel, and Word. Excellent interpersonal and communication skills. Ability to work to company deadlines to meet customer delivery dates. Work in teams to continuously improve operations and processes. DISIRED QUALIFICATIONS One year of Helicopter Crewmember experience (Flight Engineer, Flight Mechanic, Crew Chief) 2 Years of Unmanned Aerial Systems (UAS) experience (Group 2, 2/3, 3) with Remote Pilot License (Part 107) Prior Airborne Payload Operator experience Installation and maintenance of sensors (Ex. LiDAR, GPS and Specialized Camera Sensors) Associates or bachelor's degree in electronics, aircraft systems, remote sensing, unmanned systems, mechanical technology or equivalent Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This role is a field position that requires flying in the back of a helicopter in all weather conditions for extended hours. System installation, troubleshooting, repair, and removal is primarily accomplished in active flight line environmental conditions. There are long periods of standing, sitting, and working in and around aircraft with all associated hazards that come with this environment. Personal Protective Equipment (PPE) will be required during administration of certain tasks as well as being able to individually lift 70lbs. Aethon is an equal opportunity employer and welcomes applications from people of all backgrounds.

Charge Robotics is a Series A startup building robots that build solar farms. Demand for new solar projects is booming (1 ⁄ 5 of all the solar that exists in the US was installed last year!), but today's construction companies can't keep up due to limited labor resources. We thought this was insane, so we started working on robots to directly address this bottleneck and speed up the world's transition to renewables. Charge is a fast-moving company, which means constant opportunities for learning and growth. You'll have a large impact on the direction of our company, and will be compensated accordingly. If you are excited to work on interesting problems with direct climate impact, you're going to fit right in at Charge Robotics. Fast Company - Solar Building Robots to Solve One of Climate's Biggest Problems MIT News - Making solar projects cheaper and faster with portable factories YouTube - full video of our Gen1 robots building a solar farm We're MIT-founded and backed by top generalist and climate tech investors, including Founders Fund, Energy Impact Partners, Lux Capital, and Y Combinator (S21). About the role As a Robotics System Operator at Charge Robotics, you'll be full-time in the field working to run, improve, and debug our robotic factory system software. You'll work closely with both engineering and field operations teams to deploy a first-of-its-kind robotic solar installation system that will install gigawatts of clean power generation. What you'll be working on: Operating the software that runs our state-of-the-art robotic factory and fleet of delivery vehicles on solar construction sites across the US Assigning tasks to field team members to ensure materials are loaded correctly and efficiently into the factory Working with the software team to improve operator user experience and efficiency Monitoring the factory for faults, documenting issues, and working through resolutions with the team back at HQ Communicating updates with the site superintendent on a regular basis You: Are available for full-time field travel (a per diem stipend will be provided to cover housing and food) Have an engineering or technical degree in computer science, robotics, electrical engineering, or a related field Are a critical thinker and fast learner who can operate effectively in the field and under pressure Have a resilient, positive attitude and like working on a team Will follow safety procedures + reinforce a culture of safety in the field Are excited to play a direct role in fighting climate change by safely & rapidly building the clean infrastructure we need Are able to lift 50lbs if necessary It'd also be nice if you: Are familiar with programming, networking, and/or the command line Have experience working with industrial automation equipment or robotics Have experience working on construction sites Equal Opportunity Employer We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

At Disney, we‘re storytellers. We make the impossible, possible. We do this through applying and developing innovative technology and opening up the boundaries to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our dedicated team that delivers unparalleled creative content to audiences around the world. The Operator Energy System is responsible for routine maintenance and operation of CFTOD Plants that produce chilled, hot water and compressed air for the Walt Disney World Resort. Any given day they will monitor plant equipment and system status, responding to all plant alerts and alarms. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $30.71 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: **************************************** Additional Information At Walt Disney World, we are makers and doers! Experience the Disney Difference through outstanding and unique perks and benefits like cast-exclusive discounts, and access to tuition assistance through Disney Aspire! We proudly and enthusiastically encourage qualified individuals with experience in the U.S. Military to apply. Schedule Availability: Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Schedules and start times are subject to vary. KEYWORD: WDWCasting, WDW Casting, WDWCASTING WDW: Walt Disney World Casting Hourly Jobs WDW Hourly Minimum 4 years' working experience with industrial equipment operation or a related field Valid Florida driver's license Universal EPA certification or successful completion of this certificate within 3 months of employment Working knowledge of energy production equipment such as chillers, cooling towers, diesel powered generators, fire tube boilers, centrifugal air compressors, plant controls and ancillary equipment Experience working with different types of oil, grease and lubricants Possess the ability to interpret blueprints and flow charts Ability to lift up to 50 pounds Excellent written and interpersonal communication skills Proficiency in standard office software programs and mobile electronic devices Validate the operation of equipment (chilled, hot water and compressed air production), document the operational status and make necessary adjustments to optimize equipment performance Perform sequencing of equipment to meet production demands while optimizing plant efficiency Respond to emergency conditions that may require restarting the entire facility Perform routine water treatment tests and operate chemical equipment to maintain water chemistry Cast members may be required to handle cleaning chemicals and supplies Additional Personal Protective Equipment (face shields, goggles, refillable hand sanitizers, etc.) may be required

Suffolk is a national enterprise that builds, innovates, and invests. We provide value across the entire project lifecycle through our core construction management services and complementary business lines in real estate investment, design, self-perform construction, and technology start-up investment (Suffolk Technologies). By integrating data, artificial intelligence, and advanced technology through our Seamless Platform, we connect design, construction, and operations to deliver smarter, more predictable results and redefine how America builds. Suffolk - America's Contractor - is a national company with more than $8 billion in annual revenue, 3,000 employees, and 17 offices, including Boston (headquarters), New York City, Miami, West Palm Beach, Tampa, Estero, Dallas, Los Angeles, San Francisco, San Diego, Las Vegas, Herndon, U.S. Virgin Islands, and other key markets. Suffolk manages some of the most complex and transformative projects in the country, serving clients across healthcare, life sciences, education, gaming, aviation, transportation, government, mission critical, and commercial sectors. Suffolk is privately held and is led by founder, chairman and CEO John Fish. Suffolk is ranked #8 on ENR's list of “Top CM-at-Risk Contractors.” For more information, visit *************** and follow Suffolk on Facebook, Twitter, LinkedIn, YouTube, and Instagram. Position: Suffolk is currently seeking an Energy Marshall to implement learning, provide consistency, and drive rigor into energy isolation and electrical safety programs. Responsibilities: Reviewing the Electrical Energization Safety Program with the electrical contractor and commissioning authority Involvement with all stored energy systems - gas, water, steam, air. Organizing and scheduling Pre-Energization meetings Confirming individuals working on energized / de-energized equipment are Qualified Work based on NFPA 70E, OSHA, or an accepted qualified electrical safety training standard. Delivering a project specific Electrical Safety Orientation to employees who will be working on energized or de-energized equipment Reviewing the electrician's LOTO plan and verifying it is accurate and managed properly. Reviewing electrician and vendor AHA's. Confirming receipt of the approved coordination study and all arc flash labels have been applied to the equipment. Tracking and confirming all required QA/QC is complete and documentation has been submitted. Reviewing the daily Pre-Task Plan for energization activities. Implementing adequate communication to the project team that identifies daily high-risk activities, energized equipment and spaces, barriers, and off-limit spaces. Confirming all pre-energization steps have been completed. Conducting pre-energization daily walks with the electrician and project stakeholders. Performing end-of-day walks for electrical equipment to confirm all systems are secure. Confirming adherence to the LOTO plan and isolation requirements. Confirming adequate signage and barriers are installed for electrical rooms and spaces with energized equipment. Confirming an adequate access control plan is in place for electrical rooms and spaces with energized equipment. Qualifications: BA/BS + 5 years of related experience or demonstrated equivalency of experience and/or education Able to understand the safe installation of electrical equipment and various voltages, equipment types, and AC/DC systems Knowledge of pressurized mechanical lines, compressed gas and air. Experience in construction and electrical commissioning standards and practices. Experience communicating complex technical solutions and concepts to engineers and non-engineers. Ensure audit site practices against written standards as part of assurance role. Ability to Interpret line drawings and system redundancies to ensure design of LOTO systems are 100% effective and in compliance with customer standards. While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking. Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

Looking for an opportunity to work with a talented team and expand your experience in Logistics? SSI needs to add a Drafter/CAD Operator III to support the China Lake community across many different weapons systems. The mission of NAWCWD is to provide the Armed Forces with effective and affordable integrated warfare systems and life-cycle support to ensure battle space dominance. NAWCWD operates the Navy's largest Western Land and Sea Range Test and Evaluation Complex which is used to verify and validate proof of concepts to operationally fielded capabilities by applying new technologies and performing Research, Development, Test and Evaluation (RDT&E), including logistics and in-service support for guided missiles, free-fall weapons, targets, crew systems, and electronic warfare systems. Primary Functions: This operator prepares complete sets of complex drawings or computer models that include multiple views, detail drawings, and assembly drawings. Drawings or models include complex design features that require considerable drafting skill to visualize and portray. Assignments regularly require the use of mathematical formulas to draw land contours or to compute weights, center of gravity, load capacities, dimensions, quantities of material, etc. The Draft/CAD Operator works from sketches, computer models, and verbal information supplied by an engineer, architect, or designer to determine the most appropriate views, detail drawings, and supplementary information needed to complete assignments. This operator selects required information from computer programs, and internet sites, precedents, manufacturers' catalogs, and technical guides. This operator independently resolves most of the problems encountered. Supervisor or design originator may suggest methods of approach or provide advice on unusually difficult problems. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: Master's degree in a technical discipline plus/or 10 years work experience supporting weapons systems Must possess a valid California driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in February of 2023. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 11 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. What You'll Enjoy About Where We're Located We are located one hour north of Los Angeles in the heart of Ventura County, a relaxing and diverse community conveniently located near The Collection shopping center, beaches, hiking, and restaurants. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

The employee shall provide daily program support and operation of the NAVWAR/NIWC Pacific Message Center that supports 14 other Command units. The employee shall: Provide Naval Messaging support to all supported commands Maintain Message Center Defense Messaging System (DMDS)/and C2OIX Have knowledge of naval message writing format Track, test, and implement all messages and maintain profiler database for additions, deletions, and modifications to ensure timely and accurate delivery of all incoming and outgoing messages Prepare routine unclassified and classified messages for electronic delivery, and provide appropriate handling for special category (SPECAT), NATO, and Limited Distribution (LIMDIS) information Able to work hours such as 9:30am to 5:30pm Qualifications: 1+ years of experience as message and administrative support in a DoD environment Experience with Microsoft Office, including Outlook, Word, Excel, and PowerPoint Ability to communicate effectively with government and contractor personnel Familiar with Military protocol Must have ACTIVE Security clearance HS diploma or GED