Controls engineer jobs in Cheyenne, WY

Job Description Protection & Control Engineer/Technician - Field Testing & Commissioning Travel-Heavy Field Role - Up to 80% Join a leading team supporting high-voltage substation projects across transmission, distribution, and generation environments. We're looking for Protection & Control Field Testing Engineers at all experience levels to perform hands-on testing, commissioning, troubleshooting, and documentation of critical P&C systems. Candidates should expect five 10-hour workdays per week. What You'll Do: Test and commission P&C systems on high-voltage substations (15 kV - 500 kV) Perform protective relay testing (SEL, GE, Basler, Beckwith) with Omicron or Doble test sets Execute CT/PT verification, relay calibration, control scheme testing, and dynamic/static testing Interpret electrical drawings, schematics, and logic diagrams; produce detailed field reports Support Project Leads/Field Supervisors and manage clerical/project documentation What You Bring: 5+ years in substation field testing (breakers, transformers, instrument transformers, P&C systems) Proficiency with relay families: SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90/D60, etc. Experience with NETA, IEEE, NFPA, and related standards Knowledge of test software: ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator Quickset Ability to travel extensively (up to 80%) and lift 50+ lbs Preferred: Bachelor's in Electrical Engineering/Electrical Technology Electromechanical relay testing and high-voltage commissioning experience (CTs, CCVTs, PLC/SCADA, DC systems) IEC 61850 testing and commissioning experience Competitive pay and growth opportunities for skilled P&C engineers. Step into a role where every test, every relay, and every report matters.

This position will be supporting all cost control functions within the project including, but not limited to ensuring Fortis follows all requirements of working with the project teams on the prime contract, monthly financial/accounting/revenue reporting, subcontractor change order administration, owner change order administration and management, cost/schedule alignment, and project job costing compliance. Responsibilities Ability to build positive and productive relationships with the internal and external teams as well as key vendors and subcontractors you will be working with. Work closely with Fortis Cost Control Manager, PM's, PE's, Project Accountants, and administrative staff who will be undertaking the day-to-day transactional side of cost controls. Ensure conformance to project specific financial and change management processes, controls, and procedures to address the needs of the project as it evolves over time and ensure verticality with the prime contract as well as how it flows through to all subcontracts. Specialize in monitoring, tracking and analysis of budgets and costs with the site-based Project Management and Accounting teams. Participate in field audits confirming project progress, work in place, and documenting project variances. Engage with PM's and PE's regarding overall Subcontractor financial health and assist as needed. Maintain change order log in coordination with PM's, PE's, and Cost Manager. Supports updating project risk, contingency, and other standard project financial reports. Data entry of Owner, internal, and Subcontract change orders in both Fortis and Owner systems. Monitor and update change order status as they are revised and routed through the review and approval process. Support issuance of both Owner and Subcontractor change orders. Supports project financial audits throughout the project lifecycle. Supports creation of statistical analysis that provides an indication of project financial health, trends and potential risks and opportunities. Participates in month-end financial close processes related to billings, revenue, fee, and labor projections. Provides quality control on project specific financial processes & procedures (alignment with Owner WBS/cost structure, change management, billing, close out etc.). Project site visits required on a regular cadence or as needed to support site-based teams (at least monthly). Coordinate regularly with other cost control staff to share lessons learned and best practices. Assist in other duties as assigned, relevant to the achievement of the position's and team's objectives. Required Qualifications Must possess a valid driver's license and a satisfactory driving record in accordance with Fortis policy. Physical Requirements Work is performed in a professional office environment. Role is stationary, often standing or sitting for long periods of time, utilizing standard office equipment such as computers, phones, photocopiers, etc. Communication with internal and external contacts, including speaking and hearing is required. May occasionally push, pull or lift up to 25 lbs. Travel Requirements All Fortis positions require some level of driving. The above description is intended to identify the essential functions and requirements for the performance of this job; it is not to be construed as a complete statement of duties, responsibilities or requirements. All jobs require behaviors consistent with our Core Values and Culture. The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations could be made to enable employees with disabilities to perform the essential functions of the role, absent undue hardship. Fortis Construction, Inc. rese rves the right to revise the job description at any time. RQ-0287 Cost Control Engineer (Open) Fortis is an Equal Employment Opportunity employer. We adhere to a policy of making employment decisions without regards to race, color, religion, sex, age, disability or any other protected categories. It is our intention that all qualified applicants be given an equal opportunity and that selection decisions be based on job-related factors.

Job DescriptionSenior Analog/Mixed-Signal Design Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. The successful candidate in this role will do high performance transistor level design starting from initial specification, through design and layout supervision, silicon evaluation and characterization to final product introduction to market. Qualifications 5+ years of experience in high-performance analog or mixed-signal IC development in advanced CMOS processes Thorough familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design techniques. Experience in designing high performance building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc. Must have a track record of successfully taking designs to production Must have experience with evaluating silicon on bench and familiarity with standard lab equipment Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis Experience with analog and digital behavioral modeling, and/or synthesis of digital control blocks Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools MATLAB understanding would be preferred but not mandatory Familiar with designing circuits for electromigration and ESD compliance in submicron CMOS process Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes Must be able to work independently, create and adhere to schedules Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations Should be able to seek help proactively as well as share and pass on knowledge We are looking for trailblazers ... We strongly believe that the pace of the ongoing hardware revolution will be greatly accelerated by Omni Design's IP cores and the rapidly emerging semiconductor embedded design business ecosystem. At Omni Design, we have created an exciting environment with amazing talent across multiple disciplines. We like self-motivated individuals, we encourage initiative, we look for leadership qualities, we value teamwork, we like diversity, and we reward excellence. We are looking for trailblazers to bring Omni Design's vision to fruition. If you are interested in making an impact as part of a young, fast growing, cutting edge technology company, please reach out to us. Omni Design is an equal opportunity employer. We offer excellent compensation. We seek individuals that share our high standards and commitment to excellence. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Soaring above the ordinary, the IMPACT Fly Team is a powerhouse of innovation, precision, and technical mastery. As Major Project Automation & Controls Technicians, you're the architects of efficiency-engineering smarter systems, optimizing workflows, and tackling high-stakes challenges with finesse. Whether troubleshooting on-site or designing groundbreaking solutions, this elite squad is always ready to fly in, fix, and revolutionize. Ready to take your expertise to the next level? Because IMPACT is more than a name-it's a mission. 🚀 What we offer Competitive salary Paid vacation/holidays/sick time - 10+ days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Extensive product and on the job/cross training opportunities With outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us Out: A Day in a Life at Johnson Controls: What you will do As a senior level team member of the iMPACT Fly Team, you will be responsible for traveling 75-100% of the time to and assisting JCI Customers at all levels of building automation system programming, checkout and commissioning. This will include validating hardware and software commissioning activities for building automation systems. You will need to apply your advanced HVAC & Building Automation experience to work on assigned projects. You will work directly on multiple project teams to assist the Project Managers and Field Technicians. How you will do it Loads system-level controller software Performs advanced commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Advanced computer skills (Metasys preferred) Advanced knowledge of electrical testing and commissioning tools Strong documentation acumen Good communication and listening skills Advanced knowledge of mechanical HVAC systems Low voltage/120-volt wiring skills preferred A valid driver's license, with no major or frequent traffic violations HIRING HOURLY RANGE: $31- $42 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

About the Role We are currently looking for a Project Controls Engineer to provide scheduling support services to our valued client's data center practice. This position will work with a team of professionals, including client project managers, construction professionals, and project stakeholders, to develop, manage, and monitor CPM schedules and project control systems throughout a project's life cycle. This role is a significant project team position with many growth opportunities. General responsibilities include: Development, maintenance, and monitoring of construction CPM Schedules. Review project documents and specifications to develop baseline schedules that accurately include all required dates, activities, and milestones. Perform progress schedule updates to include comprehensive reporting and narratives. Review project schedules and provide recommendations based on execution goals. Perform critical path analyses, identify schedule-related problems, and recommend corrective actions. Conduct site walks for progress validation and prepare monthly reporting packages for the project site team. Review the contractor's progress and present it to management for decision-making. Develop metrics, KPIs, and benchmarks to support the program. Cost and resource management and reporting. Identification and evaluation of risk and impacts within project schedules. Communicate project status and challenges effectively. Meet with project teams, clients, owners, and various stakeholders. Requirements: Three or more years of experience in project controls and CPM scheduling within the vertical construction industry. One or more years of experience in project controls for data centers. Bachelor's degree in architecture, engineering, construction, project management, or a related field. This requirement may be waived with five or more years of direct, vertical construction industry experience. Proficiency in Oracle Primavera P6. Ability to accurately interpret construction documents. Knowledge of construction means, methods, and sequences. Experience developing construction project schedules for data center projects. Cost and resource management and reporting, Familiarity with contractual clauses as they apply to planning and scheduling, Excellent oral and written communication skills, Ability to work in a fast-paced environment and handle multiple projects simultaneously, AACEI PSP or PMI-SP certification(s) preferred. This role requires being full-time on-site. Benefits and Perks: Healthcare, dental, and vision insurance 401(k) + employer match Life and AD&D coverage 100% employer-paid Voluntary life, accident, critical illness, and hospital indemnity insurance Life Assistance Program Paid Time Off + 10 paid holidays Wellness Program Squishy rhinos Team events

Apogee Consulting was founded in 1999 with a core belief in meeting the practical needs of our clients. Born as an electrical design firm, we have evolved into a full-service Architecture and Engineering firm specializing in healthcare design. We are passionate about fostering a truly collaborative design process where architects, engineers, and other disciplines seamlessly work together towards shared goals. Our flat organizational structure encourages individual growth, creativity, and a sense of ownership in every project. With a presence across 38 states, we offer exciting opportunities to work on diverse and impactful projects that shape the future of healthcare. We are seeking a highly motivated and talented Electrical Engineer to join our team. This critical role involves researching, developing, and producing electrical construction drawings while applying expertise in industry concepts, practices, and procedures, with potential consultation on complex projects. The ideal candidate will be a passionate and driven individual with a strong emphasis on critical thinking, effectiveness, and a relentless pursuit of excellence. Benefits The employees of Apogee Consulting Group are among the company's most valuable resources. In addition to providing a safe and happy work environment, we also give each and every one of our employees a robust benefits package. · Generous salary · Up to five weeks of vacation (depending on experience) · Medical, dental, and vision insurance with company assistance · Free Short and long-term disability insurance, Life Insurance · HSA & FSA Options · Employee Assistance Program · Company-matched 401(k) · 8 paid holidays with 1 Birthday floating holiday to use at your discretion · Professional license bonuses · Continued educational reimbursement with manager pre-approval. Salary Range: $110,000 - $160,000 Annually Key Duties and Responsibilities Designs electrical systems for healthcare buildings with backup and emergency power systems, including generators, uninterruptible power supplies, and automatic transfer switches. Designs and directs designers in the creation of building designs. Directs activities to ensure that construction, installation, and operational testing conform to specifications and requirements. Utilizes Revit and other computer-aided design (CAD) software to execute engineering tasks and develop design solutions Work with an experienced group of designers and engineers to prepare building electrical plans and specifications. Designs the modeling and analysis of normal and emergency power distribution systems, the design of life safety systems, the design and modeling of lighting and associated control systems, and coordination with other design professionals. Designs lighting control systems that comply with LEED, Energy Star, and similar energy-efficient programs. Serve as an Engineer of Record. Follows the NFPA70 (NEC) and other electrical industry codes, standards, and recommended practices. Correctly applies knowledge of power distribution, three-phase systems, short-circuit calculations, and breaker coordination in designs. Displays understanding of Arc Flash calculations and/or medium voltage distribution in designs. Presents self in a professional manner and appearance. Maintains a neat and organized workspace. Serve as a mentor to other staff and provide guidance, feedback, and support on skill development and career advancement. Qualifications: Healthcare Experience is preferred but not required. Education: Bachelor's degree from a four-year college or university in electrical engineering or architectural engineering preferred. Experience: Minimum six years' experience in the A/E industry (plus two years licensed), with proven specific experience in healthcare projects Computer Skills: Proficient in Revit, AutoCAD, MS Office Suite Travel: up to 20% depending on project Current PE License (required); NCEES Registration; LEED, CEM, or LC (preferred) This is an in-office position. Apogee does not discriminate in employment based on race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service, or other non-merit factors. As federal contractors, U.S. citizenship is required, and background checks will be performed. Please Read About Third-Party Recruitment And Employment Agencies. Recruitment firms and recruiters cannot send unsolicited resumes to Apogee Consulting Group. Apogee will not pay referral compensation or recruiter fees without a signed agreement. If a recruiter or agency sends a resume or applicant without a formal agreement, Apogee is entitled to pursue and hire the candidate(s) without financial commitment. Apogee Consulting Group owns unsolicited resumes, including those submitted to employees .

FourFront Design, Inc. has an opening for a licensed Electrical Engineer. Responsible for designing electrical systems for commercial, industrial, and domestic buildings. Assists senior and lead engineers throughout the project to ensure that design components conform to municipal codes and engineering standards. Interacts with clients and maintains good client relationships with future projects in mind. Assists with final checks for accuracy of final plans and specifications submitted to client. Must be willing to affix professional engineering seal to plans and specifications created under own creation or directly supervised assistants. Uses computer assisted engineering design software and equipment. For information on FourFront Design Inc., including more information on projects, services, and our company culture, visit our website at ********************************* AAP/EEO Statement: As a federal contractor, we are an Equal Opportunity Employer for Minorities, Females, Protected Veterans and Persons with a Disability. Qualified applicants will be considered for employment without regard to race, color, sex, national origin, religion, age, marital status, veteran status, sexual orientation, disability, genetic information, or other characteristic protected under applicable Federal and State laws. About us: Mission: Craft legacies within the built environment that withstand challenges, elevate people, and leave a lasting impact. Culture: We aren't just architects or engineers, FourFront's people are as rich in experience and diverse in personal interest as the history of our great company. A shared goal in being deeply committed to where we live, work and play connects us all - and it makes us proud to be a Certified Woman-Owned Service-Disabled Veteran Owned Small Business. Pay wages: $86,000 - $110,000 annual (depending on experience and qualifications) Benefits: Paid vacation/sick accrual, 13 paid holidays, health, vision, dental, life insurance, disability insurance, retirement savings plan, paid parental leave, and continued education options. Details will be discussed during offer. Shift: 40 hours per week. Standard workdays and hours of FourFront Design Inc are Monday through Thursday, 7 AM to 5 PM and Friday 8 AM to 12 PM. Evening and weekend work may be required as job duties demand. Flexibility in schedule is considered if job duties are satisfactorily met. Experience Required: • Professional Engineering (PE) license required. • Minimum of 5 years previous electrical design experience. • Bachelor's degree or equivalent qualifying experience. • Willingness to apply for additional state or professional license when required. • Knowledge of LEED principles; encouraged to become LEED accredited. • Proficiency in Revit MEP, AutoCAD required; Visual-3D helpful. • Preferred RCDD certification but not required. • Preferred government and Veteran Affairs (VA) experience but not required. Duties: • Function as an electrical project engineer; responsible for the electrical design of commercial, medical, professional offices and other buildings. • Complete electrical design systems including building related electrical power distribution, lighting, and cabling systems. • Assist in assessing the requirements of the client's needs; Assure work meets the design and production aspects of the project. • Assist in project management tasks and be familiar with project management process. • Promote and provide expertise in sustainable design practices as required by the project. • Assist in the design review, construction budgets, and schedules and work accordingly to meet project requirements. • Apply proficient knowledge of applicable codes and ordnances. Work with code officials and other design professionals when an interpretation or exception to building codes is required. • Maintain up-to-date material and equipment/gear knowledge for selection, scheduling, design, analysis. Must be able to assist or perform evaluation of existing lighting, gear, and controls systems. • Interpret the intent of electrical contract drawings and specifications for the Client, General Contractor, Building Inspector, and other interested parties. • Review and redistribute schedules, shop drawings and samples. • Responsible for the accuracy and quality of all technical work. • Coordinate work of outside consultants. • Apply time-management skills for meeting deadlines. • Complete company-required drug test; completion of a background check and fingerprinting may be required by client. • Must be able to work in the United States. #hc212726

Job Description Electrical Engineer Healthcare Projects We are seeking a highly motivated Electrical Engineer to join a dynamic team focused on healthcare projects. This role involves designing and developing electrical systems for healthcare facilities, mentoring junior engineers, and collaborating on complex, high-profile projects. Why Youll Love This Role Competitive salary: $110,000 $160,000 annually Up to 5 weeks of vacation (based on experience) Medical, dental, and vision coverage with company support Free short- and long-term disability insurance, plus life insurance HSA & FSA options Employee Assistance Program Company-matched 401(k) 8 paid holidays + 1 floating birthday holiday Professional license bonuses Educational reimbursement opportunities Key Responsibilities Design electrical systems for healthcare buildings, including backup and emergency power systems (generators, UPS, automatic transfer switches) Lead and mentor designers in developing building designs Ensure construction, installation, and operational testing meet specifications Use Revit and CAD software to develop engineering solutions Design and analyze normal/emergency power distribution, life safety systems, and lighting/control systems Ensure compliance with LEED, Energy Star, NFPA70 (NEC), and other industry standards Apply expertise in power distribution, three-phase systems, short-circuit calculations, breaker coordination, Arc Flash, and medium-voltage distribution Serve as Engineer of Record on projects Maintain professional presence, organized workspace, and provide mentorship to junior staff Qualifications Bachelors degree in Electrical Engineering or Architectural Engineering Minimum 6 years in A/E industry, with at least 2 years licensed Healthcare project experience preferred but not required Proficiency in Revit, AutoCAD, and MS Office Suite Current PE License (required); NCEES registration preferred LEED, CEM, or LC certification is a plus Up to 20% travel depending on project needs This role is ideal for someone who is passionate about designing healthcare electrical systems, collaborating with a talented team, and advancing their career in a supportive and innovative environment.

Job Description Apogee Consulting was founded in 1999 with a core belief in meeting the practical needs of our clients. Born as an electrical design firm, we have evolved into a full-service Architecture and Engineering firm specializing in healthcare design. We are passionate about fostering a truly collaborative design process where architects, engineers, and other disciplines seamlessly work together towards shared goals. Our flat organizational structure encourages individual growth, creativity, and a sense of ownership in every project. With a presence across 38 states, we offer exciting opportunities to work on diverse and impactful projects that shape the future of healthcare. We are seeking a highly motivated and talented Electrical/RCDD Engineer to join our team. This critical role involves researching, developing, and producing electrical and low voltage construction drawings while applying expertise in industry concepts, practices, and procedures, with potential consultation on complex projects. The ideal candidate will be a passionate and driven individual with a strong emphasis on critical thinking, effectiveness, and a relentless pursuit of excellence. Benefits The employees of Apogee Consulting Group are among the company's most valuable resources. In addition to providing a safe and happy work environment, we also give each and every one of our employees a robust benefits package. · Generous salary · Up to five weeks of vacation (depending on experience) · Medical, dental, and vision insurance with company assistance · Free Short and long-term disability insurance, Life Insurance · HSA & FSA Options · Employee Assistance Program · Company-matched 401(k) · 8 paid holidays with 1 Birthday floating holiday to use at your discretion · Professional license bonuses · Continued educational reimbursement with manager pre-approval. Key Responsibilities Drive the design process from concept to completion, ensuring projects meet high-quality standards, achieve desired outcomes, and ensure projects are delivered on time and within budget. Develop innovative and impactful design solutions that elevate the lives of our users/clients. Conduct thorough research and analysis to inform design decisions and identify opportunities for improvement. Ensure compliance with applicable codes and standards, such as NFPA 70 (NEC), NFPA 72, ANSI/TIA standards, and local regulations. Prepare and review system specifications for Electrical and ICT systems, including material requirements, installation methods, and performance standards. Designs electrical and telecommunication systems for healthcare with normal backup and emergency power systems, including generators, uninterruptible power supplies and transfer switches. Coordinate with other disciplines to ensure electrical power, lighting, and low voltage systems are integrated into the overall building design. Direct and mentor designers and junior engineers in the preparation of electrical power, lighting, and ICT system designs, specifications, and documentation. Plan and Direct designers on effective execution of design tasks, providing clear guidance and constructive feedback. Displays understanding of arc-flash calculation and/or medium voltage distribution in design · Correctly applies knowledge of power distribution, three phase systems, short circuit calculations, and breaker coordination in designs Challenge and inspire those around them to grow, thrive, and contribute meaningfully. Actively seek out opportunities for professional development and stay abreast of the latest design trends and technologies. Cultivate a culture of continuous learning and improvement within the team. Salary Range: $110,000 - $160,000 Annually Qualifications: Healthcare Experience is preferred but not required. Education: Bachelor's degree from four-year college or university in engineering preferred. Experience: Minimum six years' experience in the A/E industry plus (two years licensed), with proven specific experience in healthcare projects Computer Skills: Proficient in Revit, AutoCAD, MS Office Suite Travel: up to 20% depending on project Current PE License (required); NCEES Registration; RCDD; LEED, CEM, or LC (Preferred) Work Environment This position will be in the office in an open office work environment. Apogee does not discriminate in employment based on race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service, or other non-merit factors. As federal contractors, U.S. citizenship is required, and background checks will be performed. Please Read About Third-party Recruitment And Employment Agencies. Recruitment firms and recruiters cannot send unsolicited resumes to Apogee Consulting Group. Apogee will not pay referral compensation or recruiter fees without a signed agreement. If a recruiter or agency sends a resume or applicant without a formal agreement, Apogee is entitled to pursue and hire the candidate(s) without financial commitment. Apogee Consulting Group owns unsolicited resumes, including those submitted to employees .

We are seeking a Transmission Line Engineer who will work as a member of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as an Engineer on electric transmission line design projects for extra high-voltage (EHV) overhead and underground systems for some of the largest utilities in the country. This employee will apply NESC, ASCE, ACI and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, he/she will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procurement and construction documents. This will involve working with a multi-person Leidos team and interfacing with clients, project planning, environmental, permitting, and construction management personnel. Work Location: Ideally, candidate will reside in either Colorado or Minnesota to work a remotely but all qualified candidates residing in the U.S. will be considered. Required Education & Experience: • Bachelor's or Master's degree in Civil, Structural, Electrical, or Mechanical Engineering • Experience using PLS-CADD and PLS-POLE • 2+ years of relevant experience in the design of electric utility transmission systems with a Bachelor's, or 1+ years experience with a Master's degree • Work effectively in team environment; can also work independently • Excellent verbal and written communication skills; ability to communicate with clients and project teams • Work in client office is a possibility and/or periodic travel may be required Desired Experience: • Experience with TOWER is a plus • EIT or PE certification is desirable • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus No two career paths will ever look the same. At Leidos, we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself. Protect yourself and your family, with the benefits of working for a world-class employer. When you join Leidos, you join a Fortune 500 company and one of Ethisphere Institute's “World's Most Ethical Companies”. PDSTLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. Original Posting:October 10, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $57,850.00 - $104,575.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Primary purpose: We are looking for an early-career Electrical Engineer to join our Tallgrass Project Engineering team. This role offers hands-on exposure to power plant, pipeline systems, compressor stations, terminals, substations, and motor control centers supporting Major projects. Candidates with 0 to 5 years of experience will excel in this position by contributing to a diverse range of projects, from concept to execution. Essential duties and responsibilities: * Support the design, specification, and analysis of electrical systems, including substations, MW switchgear, LV Motor control centers, load analysis, and instrumentation that supports rotating equipment * Assist in project execution, from feasibility and front-end engineering to construction support and commissioning * Perform calculations, material selection, and electrical integrity assessments * Work closely with project managers, field personnel, and vendors to ensure technical accuracy and safety compliance * Participate in inspections, failure analysis, and reliability improvements of mechanical systems * Prepare engineering deliverables such as datasheets, reports, and drawing reviews * Follows prescribed procedures and conducts analyses to develop design options or recommendations * Will work non-traditional hours as needed * This role will be up to 80% travel Minimum Requirements: Education: * Bachelor's degree in Electrical engineering from an accredited institution in Engineering or a related field. * 0 to 5 years of mechanical engineering experience (internships or co-ops in oil & gas are a plus) * Familiarity with electrical equipment used in pipeline or terminal operations * Working knowledge of CAD and engineering analysis tools (voltage drop, conduit fill, ohms law, and general electrical engineering calculations) * Strong attention to detail, safety awareness, and a proactive mindset * Ability to work in both office and field environments as needed Experience/Specific Knowledge (not required): * Exposure to midstream project work or operations support * Experience with pump or compressor station design * Root cause analysis or mechanical integrity experience Certifications, Licenses & Registrations: * Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers (for travel). Competencies, Skills & Abilities: * Knowledge of basic Engineering principles * Knowledge of the NEC/NFPA 70E * This role will travel up to 80%. * Works under direct supervision but displays initiative and moves toward requiring less supervision. * Must be able to perform all essential and marginal functions of the job. * Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules. * Ability to successfully perform multiple tasks with strict deadlines. * Ability to organize and prioritize daily work. * Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience and skill sets of the successful candidate. (as applicable to job) Physical Demands: All the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential function of this job. Reasonable accommodations may be made for individuals with disabilities to perform the essential functions. * Sitting; standing; walking or moving throughout facility; driving; talking; seeing (specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 25 lbs. * Minimal safety hazards; general office working conditions. * Must be able to sit for prolonged periods of time. * The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Working Conditions: * Required to carry a cell phone and be available to respond during working and non-working hours. * The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed. Supervisory Responsibility: * None. Preferred Education, Experience, Certifications, Competencies, Skills & Abilities: Above the minimum requirements, not required but advantageous in this position: * ABC Other Responsibilities: The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned.

Primary purpose: Provide electrical engineering subject matter expertise to support operation and maintenance of natural gas, crude oil, CO2, and water pipelines and facilities. **May be filled as an Engineer-Electrical I or II, pending candidate experience. Education: Bachelor's degree from an accredited institution in Electrical Engineering or a related field Specific Knowledge: National Electric Code (NEC) National Fire Protection Association code (NFPA) Institute of Electrical and Electronics Engineers standards (IEEE) Certifications, Licenses & Registrations: Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers (for travel) Competencies, Skills & Abilities: Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint and Outlook Intermediate proficiency with data entry / survey forms and other methods of data collection Fundamental knowledge in the design of electrical systems for large industrial facilities Familiarity and ability to read and interpret electrical and mechanical blueprints and diagrams, including flow charts, Piping and Instrument Drawings (P&IDs), single line diagrams, electrical equipment schematics, MCC/SWGR elevations, and PDC layouts Effective communication abilities with engineering and non-engineering staff Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules Ability to self-start and prioritize concurrent tasks and efforts Physical Demands: All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting; standing; walking or moving throughout facility; driving; talking; seeing (specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 25 lbs. Minimal safety hazards; general office working conditions. Must be able to sit for prolonged periods of time. The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Working Conditions: Some overnight travel to may be required to engineering contractors, equipment providers, construction sites, and operations facilities. Required to carry a cell phone and be available to respond during working and non-working hours. The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed. Supervisory Responsibility: None PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS, & ABILITIES: Above the minimum requirements; not required but advantageous in this position: Experience with hydrogen, syngas, ammonia, or GTL processing facilities Experience SP-E (Smart Plant Electrical) /Autocad Electrical. Experience in arc flash studies including the use of relay coordination, short circuit, load flow, motor starting analysis, and transient stability software (SKM, ETAP, etc.). Experience in programming protection relays (Schweitzer-SEL,GE-Multilin, and Basler) Specific knowledge related to the electrical/mechanical design of rotating equipment including engines, turbines, pumps, and electric motor drives. Advanced proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint and Outlook OTHER RESPONSIBILITIES: The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned. Essential duties and responsibilities: Orchestrate and oversee the completion of arc flash studies and other electrical safety efforts Orchestrate and oversee the completion of lightning mitigation installations Coordinate electrical grounding studies and assist with the implementation of recommended changes Develop and/or update company electrical standards including material specifications, standard operating procedures, best practices, major design installations, and operator qualifications Review electrical equipment vendor drawings and specifications Ensure that electrical field inspections, installation, measurement, and maintenance are consistent with company and industry standards Specify key electrical equipment such as medium and low voltage switchgear and motor control centers, transformers, VFD's, Soft Start's, UPS systems, DC systems, protective relay protection schemes, etc. Provide electrical engineering subject matter expertise in regards to new project design and equipment specification Ensure facility electrical drawings are accurate and up-to-date Interact internally and externally with a wide variety of people with tact, courtesy, and professionalism Maintain a high standard of ethical conduct Speak, both in person and by telephone, using a high level of verbal skills and careful listening Maintain regular, dependable attendance and a consistently high level of performance Will work non-traditional hours as needed Be available by phone during non-traditional hours Maintain a high regard for personal safety, the safety of company assets and employees, and the general public Other daily, weekly, monthly, or special project duties as identified and defined

As an Electrical Engineer at Interstates, you'll play a key role in developing and executing detailed, constructable designs for a diverse array of projects. We are looking for candidates with strong electrical experience who can apply their technical knowledge to real-world project challenges. You'll collaborate with multidisciplinary teams, mentor peers, and build client relationships, ensuring that all deliverables meet the highest standards of quality, safety, and compliance. This opportunity is open to engineers at various levels, with growth potential across the organization. Core Responsibilities Consistent for All Levels: * Lead & execute project designs: Develop and oversee designs from concept through completion, ensuring technical precision and constructability. * Collaborate cross-functionally: Coordinate with internal teams, field staff, clients, vendors, utilities, and regulators to ensure project alignment and clarity. * Facilitate site visits: Plan, conduct, and process site information to inform and improve the design process. * Delegate & manage work: Assign and track team member responsibilities, supporting on-time delivery and strong teamwork. * Client engagement: Build and maintain strong professional relationships with clients, prioritizing clear communication and feedback. * Mentorship & training: Mentor and support team members, fostering development and the sharing of best practices. * Ensure quality & standards: Uphold company, industry, and regulatory standards (such as NEC) in all deliverables; participate in reviews and continuous improvement. * Leverage engineering software: Create, review, and update documentation using drafting and design tools. Minimum Qualifications * Bachelor's degree in Electrical Engineering or closely related field from an ABET-accredited institution. * 2-8 years of relevant engineering experience, or a combination of education and hands-on work demonstrating required skills. * Engineer-in-Training (EIT) or FE certification; eligibility or attainment of a Professional Engineer (PE) license preferred (required for senior roles). * Proficiency with electrical terminology, components, symbols, and the National Electric Code (NEC). Preferred Qualifications & Pluses For All Candidates * Experience working on multidisciplinary project teams. * Familiarity with design-build, plan/spec, or design-assist project delivery. Electrical Engineer II * 2-4 years' experience in electrical/project engineering. * Exposure to field work, panel shop, or prefabrication environments. Electrical Engineer III * 4-8 years' experience leading projects or technical teams. * Exposure to commissioning/startup activities and project troubleshooting. * Client communication or early business development involvement. Sr Electrical Engineer * 7+ years' progressive experience, including managing complex projects or multiple design teams. * Professional Engineer (PE) license (required or obtainable). * Experience presenting to clients, conducting sales/site visits, or participating in industry associations. * Demonstrated ability to mentor other leaders and drive strategic or process improvement initiatives. * Multi-state PE registration or advanced certifications (e.g., PMP, LEED). * Experience developing company standards, delivering training, or representing the company in professional groups. Additional "Nice to Haves" (Applicable to Any Level) * Advanced experience in software modeling tools (Revit, BIM, Navisworks, ETAP, Bluebeam, etc.). * Experience with drafting software (e.g., AutoCAD, Revit, or comparable). * Hands-on field work during installation or troubleshooting. * Involvement in estimating, budgeting, or project scoping. * Leading or participating in standards improvement or quality initiatives. * Contributions to STEM outreach, community engagement, or internal resource groups. What We Offer * Opportunities for professional growth and career advancement. * Engaged, collaborative teams and a culture focused on innovation and quality. * Support for licensure, continuing education, and professional development. * Inclusive environment with competitive benefits. Travel: Occasional site travel may be required. Accommodations: Reasonable accommodations will be made for qualified individuals with disabilities. Compensation: The pay range for this position is $76,800 to $124,300+ benefits. Our salary ranges are determined by the experience and education required, and level of responsibility. The range posted for this role represents a range that Interstates, in good faith, believes it is willing to pay at the time of this posting. The pay is determined by job related skills, training, education, and experience. Application End Date: December 31st, 2025 In alignment with Colorado state regulations, we encourage interested candidates to submit their applications by December 31st, 2025. This will ensure your application is considered in the initial review process. Applications received after this date may be considered depending on the status of the search. Interstates Describes Its Culture as: Family-Like: * Caring co-workers treat each other like family * Be treated like an individual, not just a number * Flexible schedules allow you to focus on your personal life as well as work-life * Lunch gatherings and social activities promotes fun and camaraderie * Support charities and your community through events sponsored and hosted by Interstates Benefits: * Competitive Pay so you know you are valued * 401(k) to help you plan for your future * Health, Dental, and Vision Insurance with different options to meet your needs * Vacation so you can focus on you * Performance Bonus * Established Career Paths to help plan your future * Career Coaches that are focused on your success Ready to take your engineering career further? Apply now, specifying your years of experience and certifications/licensure.

Imagine yourself… * Doing meaningful, hands-on work that makes an everyday impact on the world around you. * Growing your expertise and expanding your skillset with every project. * Thriving in a collaborative, supportive team environment that inspires excellence. At Hach (************** a Veralto company, we ensure water quality for people around the world-and every team member plays a vital role in that mission. Our founding vision is to make water analysis better: faster, simpler, greener, and more informative. We accomplish this through teamwork, customer partnerships, passionate experts, and reliable, easy-to-use solutions. As part of our team and the broader Veralto network, you'll join a unique work environment where purpose meets possibility-making an immediate, measurable impact on a global scale while advancing your career. Why This Role Matters Water quality is critical to global health and sustainability. In this role, you'll be hands-on in designing and improving electrical systems for instruments that safeguard water resources worldwide. Your work will directly influence product reliability and performance, helping communities and industries maintain safe water every day. Reporting to the R&D Electrical Engineering Manager, the Senior Electrical Engineer (Engineer III) applies deep electrical engineering expertise to design, test, and model products and systems for water quality instruments. You'll work onsite at our state-of-the-art R&D building in Loveland, CO, collaborating with a multi-disciplinary team focused on sustaining and improving products already in production. What You'll Do * Design and analyze electrical hardware circuits to meet functional and performance requirements. * Develop and execute rigorous electrical tests to ensure reliability under real-world conditions (temperature, humidity, aging, ESD, vibration, etc.). * Lead technical discussions and design reviews, influencing product improvements. * Apply innovative methods and stay ahead of industry trends to drive continuous improvement. * Work closely with cross-functional teams and occasionally visit customer sites (up to 10% travel). Why You'll Love It Here * Hands-on engineering in a cutting-edge R&D environment. * Direct impact on products that protect water quality globally. * Opportunities for leadership and technical innovation. * Flexible hybrid work arrangement (4 days onsite, 1 day remote). * Comprehensive benefits: PPTO unlimited vacation (US only), health coverage, 401(k), career development programs. Qualifications * BS in Electrical Engineering + 7 years relevant experience, or MS + 4 years. * Expertise in circuit design, modeling (SPICE), PCB layout, EMC compliance, and analog signal processing. * Strong communication skills and ability to lead technical discussions. Join Us in Safeguarding the World's Most Vital Resources Hach is part of Veralto (NYSE: VLTO), a $5B global leader dedicated to ensuring access to clean water, safe food and medicine, and trusted essential goods. When you join our vibrant global network of 16,000 associates, you'll find purpose-driven work, growth opportunities, and a culture that values innovation and collaboration. US ONLY: The below range reflects the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. An associate's position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. The compensation range for this role is $90,000 - $120,000 USD per year. This job is also eligible for Bonus Pay. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. US residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Veralto Corporation and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available here. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at applyassistance@veralto.com to request accommodation. Unsolicited Assistance We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at any of the Veralto companies, in any form without a valid, signed search agreement in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Veralto and its companies. No fee will be paid in the event the candidate is hired by Veralto and its companies because of the unsolicited referral.

**Imagine yourself...** + Doing meaningful, hands-on work that makes an everyday impact on the world around you. + Growing your expertise and expanding your skillset with every project. + Thriving in a collaborative, supportive team environment that inspires excellence. At **Hach** (************** a Veralto company, we ensure water quality for people around the world-and every team member plays a vital role in that mission. Our founding vision is to make water analysis better: faster, simpler, greener, and more informative. We accomplish this through teamwork, customer partnerships, passionate experts, and reliable, easy-to-use solutions. As part of our team and the broader Veralto network, you'll join a unique work environment where **purpose meets possibility** -making an immediate, measurable impact on a global scale while advancing your career. **Why This Role Matters** Water quality is critical to global health and sustainability. In this role, you'll be **hands-on in designing and improving electrical systems** for instruments that safeguard water resources worldwide. Your work will directly influence product reliability and performance, helping communities and industries maintain safe water every day. Reporting to the R&D Electrical Engineering Manager, the **Senior Electrical Engineer (Engineer III)** applies deep electrical engineering expertise to **design, test, and model products and systems** for water quality instruments. You'll work onsite at our **state-of-the-art R&D building in Loveland, CO** , collaborating with a multi-disciplinary team focused on sustaining and improving products already in production. **What You'll Do** + **Design and analyze electrical hardware circuits** to meet functional and performance requirements. + Develop and execute **rigorous electrical tests** to ensure reliability under real-world conditions (temperature, humidity, aging, ESD, vibration, etc.). + Lead technical discussions and design reviews, influencing product improvements. + Apply innovative methods and stay ahead of industry trends to drive continuous improvement. + Work closely with cross-functional teams and occasionally visit customer sites (up to 10% travel). **Why You'll Love It Here** + **Hands-on engineering** in a cutting-edge R&D environment. + Direct impact on products that protect water quality globally. + Opportunities for leadership and technical innovation. + Flexible hybrid work arrangement (4 days onsite, 1 day remote). + Comprehensive benefits: PPTO unlimited vacation (US only), health coverage, 401(k), career development programs. **Qualifications** + BS in Electrical Engineering + 7 years relevant experience, or MS + 4 years. + Expertise in circuit design, modeling (SPICE), PCB layout, EMC compliance, and analog signal processing. + Strong communication skills and ability to lead technical discussions. **Join Us in Safeguarding the World's Most Vital Resources** Hach is part of Veralto (NYSE: VLTO), a $5B global leader dedicated to ensuring access to clean water, safe food and medicine, and trusted essential goods. When you join our vibrant global network of 16,000 associates, you'll find purpose-driven work, growth opportunities, and a culture that values innovation and collaboration. **US ONLY** **:** The below range reflects the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. An associate's position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. The compensation range for this role is $90,000 - $120,000 USD per year. This job is also eligible for Bonus Pay. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. US residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Veralto Corporation and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes. The EEO posters are available **here (********************************************* . We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us at applyassistance@veralto.com to request accommodation. **Unsolicited Assistance** We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at any of the Veralto companies (*************************************** , in any form without a valid, signed search agreement in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Veralto and its companies. No fee will be paid in the event the candidate is hired by Veralto and its companies because of the unsolicited referral. Veralto and all Veralto Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. We value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Soaring above the ordinary, the IMPACT Fly Team is a powerhouse of innovation, precision, and technical mastery. As Major Project Automation & Controls Technicians, you're the architects of efficiency-engineering smarter systems, optimizing workflows, and tackling high-stakes challenges with finesse. Whether troubleshooting on-site or designing groundbreaking solutions, this elite squad is always ready to fly in, fix, and revolutionize. Ready to take your expertise to the next level? Because IMPACT is more than a name-it's a mission. 🚀 What we offer Competitive salary Paid vacation/holidays/sick time - 10+ days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Extensive product and on the job/cross training opportunities With outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us Out: A Day in a Life at Johnson Controls: What you will do As a senior level team member of the iMPACT Fly Team, you will be responsible for traveling 75-100% of the time to and assisting JCI Customers at all levels of building automation system programming, checkout and commissioning. This will include validating hardware and software commissioning activities for building automation systems. You will need to apply your advanced HVAC & Building Automation experience to work on assigned projects. You will work directly on multiple project teams to assist the Project Managers and Field Technicians. How you will do it Loads system-level controller software Performs advanced commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Advanced computer skills (Metasys preferred) Advanced knowledge of electrical testing and commissioning tools Strong documentation acumen Good communication and listening skills Advanced knowledge of mechanical HVAC systems Low voltage/120-volt wiring skills preferred A valid driver's license, with no major or frequent traffic violations HIRING HOURLY RANGE: $31- $42 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job DescriptionAnalog/Mixed-Signal Design Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. The successful candidate in this role will design high performance transistor level circuits starting from initial specification, through design and layout supervision, silicon evaluation and characterization to final product introduction to market. Qualifications 2+ years of experience in high-performance analog or mixed-signal IC development in advanced CMOS processes Familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design and building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc. Must have experience with evaluating silicon on bench and familiarity with standard lab equipment Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis Experience with analog and digital behavioral modeling Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes Must be able to work independently, create and adhere to schedules Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations Should be able to seek help proactively We are looking for trailblazers ... We strongly believe that the pace of the ongoing hardware revolution will be greatly accelerated by Omni Design's IP cores and the rapidly emerging semiconductor embedded design business ecosystem. At Omni Design, we have created an exciting environment with amazing talent across multiple disciplines. We like self-motivated individuals, we encourage initiative, we look for leadership qualities, we value teamwork, we like diversity, and we reward excellence. We are looking for trailblazers to bring Omni Design's vision to fruition. If you are interested in making an impact as part of a young, fast growing, cutting edge technology company, please reach out to us. Omni Design is an equal opportunity employer. We offer excellent compensation. We seek individuals that share our high standards and commitment to excellence. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About the Role We are currently looking for a Project Controls Engineer to provide scheduling support services to our valued client's data center practice. This position will work with a team of professionals, including client project managers, construction professionals, and project stakeholders, to develop, manage, and monitor CPM schedules and project control systems throughout a project's life cycle. This role is a significant project team position with many growth opportunities. General responsibilities include: Development, maintenance, and monitoring of construction CPM Schedules. Review project documents and specifications to develop baseline schedules that accurately include all required dates, activities, and milestones. Perform progress schedule updates to include comprehensive reporting and narratives. Review project schedules and provide recommendations based on execution goals. Perform critical path analyses, identify schedule-related problems, and recommend corrective actions. Conduct site walks for progress validation and prepare monthly reporting packages for the project site team. Review the contractor's progress and present it to management for decision-making. Develop metrics, KPIs, and benchmarks to support the program. Cost and resource management and reporting. Identification and evaluation of risk and impacts within project schedules. Communicate project status and challenges effectively. Meet with project teams, clients, owners, and various stakeholders. Requirements: Five or more years of experience in project controls and CPM scheduling within the vertical construction industry. Two or more years of experience in project controls for data centers. Bachelor's degree in architecture, engineering, construction, project management, or a related field. This requirement may be waived with five or more years of direct, vertical construction industry experience. Proficiency in Oracle Primavera P6. Ability to accurately interpret construction documents. Knowledge of construction means, methods, and sequences. Experience developing construction project schedules for data center projects. Cost and resource management and reporting, Familiarity with contractual clauses as they apply to planning and scheduling, Excellent oral and written communication skills, Ability to work in a fast-paced environment and handle multiple projects simultaneously, AACEI PSP or PMI-SP certification(s) preferred. This role requires being full-time on-site. Benefits and Perks: Healthcare, dental, and vision insurance 401(k) + employer match Life and AD&D coverage 100% employer-paid Voluntary life, accident, critical illness, and hospital indemnity insurance Life Assistance Program Paid Time Off + 10 paid holidays Wellness Program Squishy rhinos Team events

Apogee Consulting was founded in 1999 with a core belief in meeting the practical needs of our clients. Born as an electrical design firm, we have evolved into a full-service Architecture and Engineering firm specializing in healthcare design. We are passionate about fostering a truly collaborative design process where architects, engineers, and other disciplines seamlessly work together towards shared goals. Our flat organizational structure encourages individual growth, creativity, and a sense of ownership in every project. With a presence across 38 states, we offer exciting opportunities to work on diverse and impactful projects that shape the future of healthcare. We are seeking a highly motivated and talented Electrical/RCDD Engineer to join our team. This critical role involves researching, developing, and producing electrical and low voltage construction drawings while applying expertise in industry concepts, practices, and procedures, with potential consultation on complex projects. The ideal candidate will be a passionate and driven individual with a strong emphasis on critical thinking, effectiveness, and a relentless pursuit of excellence. Benefits The employees of Apogee Consulting Group are among the company's most valuable resources. In addition to providing a safe and happy work environment, we also give each and every one of our employees a robust benefits package. · Generous salary · Up to five weeks of vacation (depending on experience) · Medical, dental, and vision insurance with company assistance · Free Short and long-term disability insurance, Life Insurance · HSA & FSA Options · Employee Assistance Program · Company-matched 401(k) · 8 paid holidays with 1 Birthday floating holiday to use at your discretion · Professional license bonuses · Continued educational reimbursement with manager pre-approval. Key Responsibilities Drive the design process from concept to completion, ensuring projects meet high-quality standards, achieve desired outcomes, and ensure projects are delivered on time and within budget. Develop innovative and impactful design solutions that elevate the lives of our users/clients. Conduct thorough research and analysis to inform design decisions and identify opportunities for improvement. Ensure compliance with applicable codes and standards, such as NFPA 70 (NEC), NFPA 72, ANSI/TIA standards, and local regulations. Prepare and review system specifications for Electrical and ICT systems, including material requirements, installation methods, and performance standards. Designs electrical and telecommunication systems for healthcare with normal backup and emergency power systems, including generators, uninterruptible power supplies and transfer switches. Coordinate with other disciplines to ensure electrical power, lighting, and low voltage systems are integrated into the overall building design. Direct and mentor designers and junior engineers in the preparation of electrical power, lighting, and ICT system designs, specifications, and documentation. Plan and Direct designers on effective execution of design tasks, providing clear guidance and constructive feedback. Displays understanding of arc-flash calculation and/or medium voltage distribution in design · Correctly applies knowledge of power distribution, three phase systems, short circuit calculations, and breaker coordination in designs Challenge and inspire those around them to grow, thrive, and contribute meaningfully. Actively seek out opportunities for professional development and stay abreast of the latest design trends and technologies. Cultivate a culture of continuous learning and improvement within the team. Salary Range: $110,000 - $160,000 Annually Qualifications: Healthcare Experience is preferred but not required. Education: Bachelor's degree from four-year college or university in engineering preferred. Experience: Minimum six years' experience in the A/E industry plus (two years licensed), with proven specific experience in healthcare projects Computer Skills: Proficient in Revit, AutoCAD, MS Office Suite Travel: up to 20% depending on project Current PE License (required); NCEES Registration; RCDD; LEED, CEM, or LC (Preferred) Work Environment This position will be in the office in an open office work environment. Apogee does not discriminate in employment based on race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service, or other non-merit factors. As federal contractors, U.S. citizenship is required, and background checks will be performed. Please Read About Third-party Recruitment And Employment Agencies. Recruitment firms and recruiters cannot send unsolicited resumes to Apogee Consulting Group. Apogee will not pay referral compensation or recruiter fees without a signed agreement. If a recruiter or agency sends a resume or applicant without a formal agreement, Apogee is entitled to pursue and hire the candidate(s) without financial commitment. Apogee Consulting Group owns unsolicited resumes, including those submitted to employees .