Controls technician jobs in Valley Falls, RI - 373 jobs

Engineering Technician - Medical Device R&D temp to perm Marlboro, MA Support engineers in the development and testing of single-use medical devices. This hands-on role involves working with Engineers testing prototypes, performing validation and system testing, and accurately documenting results in a regulated environment. Responsibilities Perform validation, strength, and system testing on medical devices Work with tubing and small mechanical components Set up and maintain test equipment; perform basic troubleshooting Document test results and communicate findings to engineers Support calibration and quality documentation requirements Qualifications Associate degree or equivalent hands-on experience 1+ year experience in technical, lab, R&D, or manufacturing role Strong mechanical aptitude and troubleshooting skills Ability to follow procedures and document work accurately Medical device or regulated environment experience preferred.

A leading investment firm in Boston is looking for a Principal Front-Office Engineer to drive the design and implementation of applications for market analysis. You will work closely with portfolio analysts and traders, focusing on building robust systems that enhance investment decisions. The ideal candidate has over 5 years of experience in Python development and strong skills in financial data manipulation. This position offers a hybrid work arrangement, with 2 days in the office per week. #J-18808-Ljbffr

****Senior Software Engineer, Demand Tech********Boston, MA********Hybrid Schedule (M/F remote, T/W/TH in-office)****At Magnite, we cultivate an environment of continuous growth and collaboration. Our work impacts what millions of people read, watch, and buy, and we're looking for people to help us tackle that responsibility with creativity and focus. Magnite (NASDAQ: MGNI) is the world's largest independent sell-side advertising platform. Publishers use our technology to monetize their content across all screens and formats including CTV / streaming, online video, display, and audio. ****About this team:****Our team specializes in building traffic-shaping technology to prioritize the highest-value ad requests at scale. With over 1 trillion daily transactions, a 1% improvement in ad request prioritization impacts 10+ billion transactions daily.****In this role, you will:***** Develop large-scale distributed systems and solve deep technical and mathematical challenges* Solve for large-scale data analysis* Solve problems involving complex mathematical algorithms to optimise traffic consumption* Develop high-performance software and write optimised, low-latency software that routes high volumes of ad request traffic and targets p99 latencies #J-18808-Ljbffr

A leading technology company in Boston seeks a Senior DocuSign Engineer to lead the design and implementation of DocuSign solutions. The role requires over 5 years of experience in DocuSign, strong technical expertise, and collaboration with cross-functional teams. Ideal candidates will have a Bachelor's degree in Computer Science and a proven track record in optimizing contract management workflows. The position offers competitive compensation and extensive benefits. #J-18808-Ljbffr

About this opportunity : As a Manufacturing Technician III, you'll be responsible for the implementation of assigned production operations working within defined production schedules in a cGMP environment. Key Responsibilities: May specialize in either purification or synthesis processes. As required, may cross train on basic or non-technical operations associated with other functions within the company. Maintain a clean and organized work environment in accordance with defined procedures. Assist Process Support Group in the execution of special projects and data collection. Demonstrate proficiency on the execution of key manufacturing processes which may include all or portions of the following: synthesis, cleavage and deprotection, chromatography, ultrafiltration , or freeze-drying Qualify lower levels on key manufacturing processes. May act as a lead for any given campaign. Review of basic cGMP documentation including solution and raw material reconciliation. Develop, review and revise SOPs and PIs to assure documentation reflects current operations. Qualify on basic investigational documentation including OOT, SHE, and CAPA's. Revise generic documentation to keep up with industry standards and customer expectations. Required Skills/Abilities: Minimum education requires high school diploma or equivalent with college level chemistry or equivalent work experience. A biotechnology certificate or college degree is preferred. Must have knowledge of basic laboratory instrumentation such as use of pH meter, UV instrumentation, and solution delivery systems (process skids). Must have knowledge of relevant manufacturing processes which may include chemical synthesis, chromatography, ultrafiltration, freeze-drying, and aseptic technique. Experience in cGMP manufacturing environment. The annualized salary range for this position is $74,200.00 - $90,700.00.

We are seeking a Calibration Technician/Electrical with 2+ years of experience and/or training. This role supports production and engineering teams by calibrating, maintaining, and troubleshooting electronic, mechanical, and electro-mechanical tools and fixtures, including legacy equipment. The ideal candidate is detail-oriented, tech-savvy, and enjoys solving technical challenges. Requirements: · Experience calibrating, repairing, and maintaining electronic, mechanical, or electro-mechanical test equipment. · Experience working with legacy equipment and recommending new tools or upgrades. · Ability to read and interpret engineering drawings, manuals, and technical specifications. · Strong attention to detail and accuracy. · Familiarity with quality standards and calibration procedures. · Basic computer skills: experience with ERP or equipment tracking systems is a plus. · Effective communication, documentation, and teamwork skills. · Proactive problem-solver with a continuous improvement mindset. Responsibilities: · Aids In process inspectors in the conducting of in-process and finished goods testing · Fabricate electro-mechanical components per engineering documents and drawings or instructions from engineering staff · Maintain the calibration program, including schedules, equipment tracking, and repair component inventory. · Repair and maintain legacy equipment to ensure continued accuracy and reliability. · Recommend new equipment or upgrades to improve testing, calibration, and production processes. · Read and interpret manuals, engineering drawings, and specifications to perform calibrations, repairs, and assembly tasks accurately. · Coordinate external calibration services when needed. · Support production testing for in-process and finished products. · Build, assemble, test, and troubleshoot electro-mechanical fixtures and assemblies. · Assist engineering with component selection, fixture design, and product development. · Document experiments, tests, and calibration results clearly. · Participate in troubleshooting initiatives, including acoustic and sonar systems. · Recommend improvements to calibration processes, tools, and procedures. Perform other duties as assigned. Employment with Massa Product Corporation may require an individual to obtain a U.S. Security Clearance. Cleared individuals must be U.S. Citizens , pass a background check successfully, and consent to a non-disclosure agreement. Massa Products is a drug free workplace. In addition to competitive wages, Massa offers an excellent benefits package, including health, dental, life, and disability insurance(s), along with a 401k plan with profit sharing opportunity! This package is offered to full-time hourly and salaried employees. When you join Massa, you're not just joining a company; you're joining a family. Applicants who are selected for this full-time position will be able to grow here by demonstrating their capability to do so. Being detail-oriented, having a strong work ethic, and taking pride in the company is essential for success! Massa Products Corporation is a Merit Based/ Equal Opportunity/Affirmative Action Employer Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Professional development assistance Application Question(s): Are you able to read and write English? Experience: Calibration: 2 years (Preferred) Security clearance: Secret (Preferred) Ability to Commute: Hingham, MA 02043 (Required) Ability to Relocate: Hingham, MA 02043: Relocate before starting work (Preferred) Work Location: In person

Runwise (**************** is a fast-paced, customer-focused climate-tech startup that controls and runs the key energy systems (heating, water, etc…) in 8000+ buildings throughout the US. Runwise's unique hardware and software service significantly reduces energy usage, substantially lowering costs and carbon output. As of today, Runwise's technology takes the equivalent of 80,000 cars worth of carbon emissions off the road each year. DUTIES AND RESPONSIBILITIES: The Lead Boiler Controls Technician installs Runwise control and sensor networks in residential and commercial buildings and provides service calls. Install Runwise control and setup internet connection Install wired and wireless network sensors throughout buildings Test control and wireless network systems Navigate the anatomy of a boiler room and identify components in both steam and hydronic systems Coordinate installations with team scheduler Update and maintain various tracking systems to manage customer installation information that is critical for technology, monitoring and finance teams across the company Maintain necessary parts inventory in technicians' service van REQUIRED WORK EXPERIENCE Experience in the electrical or HVAC field Must also have knowledge and understanding of computers and circuits Candidates do not need to come to the role with experience in the energy industry or with heating systems, but they must be willing to learn. Must have a clean and valid driver's license Located in the Boston Metro area Ideal candidates should also come with: Effective multi-tasking and efficient time management capabilities Natural initiative and problem solving skills Excellent attention to detail Strong sense of ownership in work Positive attitude Computer literacy with experience in Microsoft Office and Google Docs/Sheets Conversational Spanish is a plus Hourly Wage: $35.00-$50.00 per hour (Based on experience) This is an excellent opportunity to join a fast-growing company and create a career path beyond this initial role. You will be surrounded by talented people where you will learn about real estate and software/managed services sales at a very fast growing tech company, whilst having a tangible impact on reducing carbon emissions across the country. Runwise is proud to be an equal opportunity employer. We are committed to equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. We celebrate and support diverse perspectives, skills, and experiences within our company. What you believe: No job is too small. Sincerity builds trust. Setbacks fuel progress. Efficiency is vital. Benefits: Medical, dental, and vision insurance HSA & FSA options Paid Parental Leave Access to Talkspace & Health Advocate Flexible PTO 401K Company paid life insurance Voluntary supplemental life insurance Summer Fridays Employee Resource Groups

Controls Technician - Boston, MA - $38.00/hr to $48.00/hr - Full-Service Mechanical Contractor About the Opportunity A long-established and award-winning mechanical and building services contractor is seeking an experienced Controls Technician to support projects throughout the Boston, MA region. This firm delivers high-performance building and energy solutions, specializing in the installation, startup, commissioning, and service of Building Automation Systems (BAS) for healthcare, higher education, pharmaceutical, and commercial facilities. This role offers overtime availability, a company vehicle, and strong benefits while working with a team recognized for technical expertise, reliability, and long-term employee development. Position Details Title: Controls Technician Location: Boston, MA (Greater Boston Area) Compensation: $38.00/hr - $48.00/hr + Overtime Bonus: Year-End Performance & Profitability Bonus Employment Type: Full-Time Key Responsibilities Install, commission, and troubleshoot Building Automation Systems (BAS) across diverse facility types Coordinate BAS installations according to engineered drawings, specifications, and project standards Mount and wire controllers, sensors, and control panels; test and validate control sequences Program and integrate BAS software databases, including custom logic, sequence modifications, and system tuning Perform point-to-point verification and full-system commissioning to ensure system integrity and performance Diagnose issues with inputs, outputs, network communication, and field devices Work with BAS communication protocols including BACnet, Modbus, and LON Collaborate with building owners, GCs, engineers, and end users to support successful project turnover Ideal Candidate Previous experience as a Controls Technician or similar BAS controls role Strong proficiency in controls integration, programming, and commissioning practices Solid understanding of electrical fundamentals and HVAC equipment operation Excellent troubleshooting, diagnostic capabilities, and problem-solving skills Detail-oriented communicator who can work independently and as part of a team What's Offered $38.00/hr - $48.00/hr (based on experience) Overtime Opportunities Annual Year-End Bonus (Performance & Company Profitability) Company Vehicle with Fuel & Maintenance Included Comprehensive Medical, Dental, and Vision Coverage Life Insurance, Short-Term & Long-Term Disability 401(k) Program with 3% Company Match - Fully Vested Day One Generous PTO, Holidays, Sick Leave, and a Paid Birthday Off About the Company This company is a highly respected mechanical and building services provider serving the Northeast. With a workforce of more than 750 professionals, the organization specializes in HVAC, energy services, controls, and full-service MEP solutions supporting healthcare, higher education, life sciences, industrial, and commercial clients.

Are you looking to make a meaningful impact on public health and the environment? Join the MWRA team! We deliver some of the nation's highest-quality drinking water to 3 million residents, restored Boston Harbor, and continue to invest in protecting vital public resources. Be part of a mission-driven organization where your work truly makes a difference in a safe, inclusive, and supportive environment. Summary: Participates in the development, installation and maintenance of the Authority's Supervisory Control and Data Acquisition (SCADA) system. Required to be on-call for emergencies 24 hours per day, 7 days a week. Posting Period: 1/9/2026 to 1/23/2026 Location: Clinton, MA Salary: $103,840.83 Annually $1,996.94 Weekly Full salary range: $72,259.25 - $103,840.83 Annually $1,389.60 - $1,996.94 Weekly Work Schedule: Monday - Friday 7:00am - 3:30pm Key Responsibilities * Assists with the development, installation, enhancement and maintenance of the control and monitoring system. * Installs, repairs and services direct to line, time division multiplex digital channel banks, CSU/DSU high-speed data modems and other data communications equipment. * Works with the phone company and other vendors to achieve data line installations and repairs. * Performs precision calibration and maintenance on primary instrumentation devices utilized for the control and operation of SCADA controlled and monitored water and wastewater facilities. * Installs, repairs and services UHF, point to multipoint multiple addresses, and spread spectrum data radios along with analog/digital microwave systems in the 2, 6, 10, 11 and 23 Ghz bands as directed. * Installs, repairs and services microwave towers, antennas, transmission lines and dehydrator units as directed. * Works with Human Machine Interface screens, SCADA PCs, network equipment, programmable logic controllers and remote terminal units as directed. * Performs preliminary path studies of proposed microwave links as well as frequency interference and intermodulation studies at microwave/radio sites. * Performs related duties as required. Required Qualifications * An Associate's Degree in Electronic Engineering, an electronics technician certification (community college or trade school), or an ISA Control Systems Technician Certification; and * At least one (1) year experience maintaining and servicing computer controlled programmable logic controllers (PLCs) and/or other types of automated process control; and * Experience in the calibration, repair and maintenance of instrumentation and data communication equipment required; or * Any equivalent combination of education or experience. * Valid Class D motor vehicle license. * FCC General Radiotelephone Operator License (or ability to obtain license within six months.) * Pass Confined Space Entry Training within six months. * This position has been designated as essential in instances where the MWRA Executive Director requires essential personnel to report to work such as inclement weather or other emergencies. * THIS POSITION QUALIFIES FOR A SIGN ON BONUS. FOR INFORMATION ON THE BONUS AND OTHER BENEFITS PLEASE CLICK ON THE LINK! - https://www.mwra.com/about-mwra/careers Knowledge and Abilities * Ability to troubleshoot to the board level utilizing a variety of electronic test equipment as well as computer driven diagnostics is required. * Ability to install, align and service microwave towers, dish, yagi and Omni directional antennas in excess of 100 feet above ground level required. * Familiarity with windows-based HMI application software is desired. * Familiarity with Auto-CAD, or other equivalent CAD design program is desired. * Familiarity with computer aided microwave terrain analysis engineering program. * Working knowledge of Windows Operating Systems. * Strong initiative/work ethic and excellent interpersonal, oral and written communication skills required. Tools and Equipment Used Electronic test equipment, PLC's climbing and fall retrieval equipment, personal computer including word processing and other software, hand tools, mobile radios and copy and fax machines. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel or operate objects, tools or controls and reach with hands and arms. The employee is regularly required to walk, sit, climb or balance, stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee frequently works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually loud in field settings and moderately quiet in office settings. Supervision Received and Exercised Works under the general supervision of the Senior SCADA Technician or Unit Supervisor. Exercises close supervision of technicians and support staff. Other Position Information PCR#: 5841005 Division: Operations Department: Scada Maint - Water/Wastewater Union/Grade: AFSCME (Unit 2)/Grade 18 Massachusetts Water Resources Authority (MWRA) is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, national or ethnic origin, age, religion, disability, sex or gender, sexual orientation, gender identity or expression, or veteran status.

Job DescriptionLead Boiler Controls Technician Employment Type: Full-Time A fast-growing climate technology company is seeking a Lead Boiler Controls Technician to install, configure, and service advanced control and sensor networks in residential and commercial buildings throughout the Boston metro area. This role is ideal for a technician with an electrical or HVAC background who enjoys hands-on work, technology, and problem-solving. You'll play a key role in modernizing building energy systems, improving efficiency, and reducing environmental impact - while building a long-term career with strong growth potential. Key Responsibilities Install control systems and configure internet connectivity in residential and commercial buildings Install and commission wired and wireless sensor networks throughout buildings Test, troubleshoot, and verify proper operation of control and network systems Navigate boiler rooms and identify components in steam and hydronic systems Coordinate installation schedules with internal dispatch and operations teams Maintain accurate installation and service records across internal tracking systems Manage and maintain parts inventory within assigned service vehicle Respond to service calls as needed to support installed systems Required Experience & Qualifications Background in HVAC, electrical, or related technical field Working knowledge of computers, circuits, and basic networking concepts Willingness to learn boiler systems, controls, and energy technologies (training provided) Valid driver's license with a clean driving record Must be located in or able to commute throughout the Boston metro area Preferred Qualifications Strong multitasking and time management skills Natural problem-solving ability and initiative High attention to detail and strong sense of ownership Positive, team-oriented attitude Computer proficiency with

Job DescriptionAbout the Role Double E Group designs and manufactures advanced web handling, material handling, and converting solutions used across paper, tissue, film, and foil converting. Join our Machining/Manufacturing/Assembly facility and work alongside specialists in manual machining, saw cutting, assembly, and service to produce high-precision parts that power our customers' operations. A Day in the Life You begin your shift by reviewing program specs and blueprints, mapping out machine operations and sequencing for a low-volume, high-mix workload. With 5+ changeovers daily, you group jobs to trim setup time and keep throughput high. You perform efficient setups, mount and align tools and fixtures, and transfer commands from servers to CNC modules via network links. After a meticulous first-piece inspection using vernier calipers, micrometers, and drop dial indicators, you run the job-monitoring lubrication and cooling, and stopping the machine as needed to swap tooling or adjust placement according to the machining sequence. Throughout the day, you collaborate with your Supervisor and Application Engineering/Programming to refine processes and improve outcomes. Other duties arise, and you handle them with the same care and drive. What You'll Do Operate CNC equipment in a low-volume, high-mix environment (5+ changeovers daily). Analyze and group work to reduce setups and maximize workflow. Perform efficient machine setups. Complete first-piece inspections using vernier calipers, micrometers, and drop dial indicators. Mount, install, align, and secure tools, attachments, fixtures, and workpieces using hand tools and precision measuring instruments. Stop machines to remove finished parts or to change tooling, setup, or piece placement per required machining sequences. Transfer commands from servers to computer numerical control (CNC) modules using computer network links. Ensure proper lubrication and cooling during operation. Review program specifications or blueprints to determine and set operations, sequencing, finished dimensions, and numerical control sequences. Perform other duties as assigned. What You Bring Some degree of CNC programming experience. Average math skills (add, subtract, multiply, divide). Ability to read and comprehend instructions; clear, simple oral communication skills. Physically able to lift, push, pull, and position components up to 50 lbs. Ability to stand consistently for an entire 8 to 10-hour shift. Team-oriented and reliable. Education and Experience Minimum of three years of experience in a machine shop, or one year if a vocational school graduate. Knowledge of basic machining practices and materials is a plus, as is general mechanical knowledge. Team Culture Work shoulder-to-shoulder with skilled colleagues across machining, assembly, and service. Your ideas for process improvements are encouraged, tested, and implemented to raise the bar for quality and efficiency.

Be part of the future! Let's Build a better Tomorrow Together! We are one team, dedicated to working together to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are passionate about making a difference! What we offer Competitive salary Paid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care Extensive product and on the job/cross training opportunities with outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Company vehicle, Tools and Equipment to complete all jobs Providing Scheduling and management support What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment Provide front line technical and repair support through effective communications with Johnson Controls customers Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization How you will do it Loading Johnson Controls field and network level controller software Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e., Sensors, actuators, etc.) and complete all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety What we look for Required Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

SummaryThe Repair Controls Technician is a member of the maintenance team responsible for diagnosing, repairing and providing maintenance to complicated electrical, electronic, and automated equipment used in the manufacturing of jet engine components in an industrial environment. Pay for this position is going to be $38.00 an hour.Job Description About GE Aerospace If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard. Working at our Lynn Facility Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone. By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter. Here are just a few of the best reasons you will want to consider us: Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. Earn merit-based rewards and incentives. Free Onsite Parking. Set work schedule with no mandatory overtime. Work in a climate-controlled building out of the elements. Have opportunities for continuous learning and development. Essential Responsibilities: Troubleshoot, identify and diagnose mechanical and electrical issues. Maintain, repair, calibrate, and complete preventative maintenance on a variety of electrical, electronic, and automated equipment which includes machine controls. Specific duties may include repairing and maintaining CNC, PLC, machine tools, and special process manufacturing equipment. Reading and interpreting blue prints, schematic drawings, and diagrams. Maintain a safe work environment by observing and following all safety standards and procedures; complying with OSHA and GE standards. Perform other duties as required High Voltage Experience Strongly Preferred Qualifications/Requirements: High School Diploma or equivalent education (GED) Massachusetts Electrician Journeymen License Ability to work with associated power tools, measuring, and testing equipment ELIGIBILITY REQUIREMENTS Ability to lift, move and manipulate fixtures and component hardware up to 30 lbs. (with or without reasonable accommodations) Ability to work in confined areas, work off ladders, platforms and heights Desired Characteristics: Three years of experience in electro-mechanical diagnosis, troubleshooting, maintenance, and repair. Experience working in an industrial and manufacturing environment. Degree in Electronics or practical electronic work experience. Demonstrated competence in maintenance of CNC, electronic, digital, pneumatic, N/C drive, and hydraulic systems. Demonstrated blueprint reading of hydraulic, pneumatic, and electronic systems experience. Have knowledge and understanding of safety rules in an industrial setting. Must be familiar with industrial and Massachusetts regulations. Excellent communication skills. Possess strong electrical and mechanical abilities. The pay for this position is 38/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Controls Technician - Supporting the Systems That Power Automation We're seeking a Controls Technician to assist with the setup, troubleshooting, and maintenance of automation and control systems in real-world industrial environments. This position offers hands-on experience with cutting-edge technology and the opportunity to support projects that integrate electrical, mechanical, and software systems. What You'll Be Doing: Install, wire, and test control panels, PLCs, sensors, and other automation components Troubleshoot and repair control systems to ensure reliable performance Assist engineers with system setup, testing, and commissioning Read and interpret electrical schematics, wiring diagrams, and control logic Document system updates, maintenance activities, and technical findings Collaborate with cross-functional teams to ensure smooth implementation and operation What We're Looking For: Associate degree or technical certification in Electrical Technology, Automation, or related field Practical experience with control systems, PLCs, or industrial automation Strong understanding of electrical fundamentals and troubleshooting techniques Clear communication skills and attention to detail Willingness to travel for on-site work and support project deployments

Make your mark at the world's largest HVAC company The HVAC Controls Technician II position for Building Automation Systems (BAS) is critical to our success in ensuring our customers receive top-notch service as it relates to the installation, programming, and service of commercial digital control systems while maintaining quality and profitability. The position will be responsible for providing technician support for BAS, maintenance agreements, system upgrades, and controls related service requests. Location: Boston, MA What you will do: Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships Identify, analyze, diagnose, and troubleshoot direct digital control systems Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming Provide controls technical support to HVAC technicians Create and/or implement programming and graphics for new installations and retrofit projects Commission controls installations and verify that control sequences meet scope, design, or specifications Provide training and follow-ups for Customers and operations personnel Complete work orders and review with customers for accuracy Continually look for ways to improve our processes and ability to serve our customers effectively What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the HVAC Industry The opportunity to work on all types of commercial equipment and cutting-edge technologies such as Intelligent Equipment, Magnetic Bearing Technology, and VRF Technology Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED. 3+ years of related experience with increasing responsibility. Valid driver's license with acceptable driving record. Ability to lift 50lbs with or without an accommodation. Required license(s) and/or training card as required by local law district. Preferred Qualifications: Experience in BAS, HVAC, or related industry. Proficiency with test instruments and calibration tools. Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals. Competency in the operation of HVAC equipment and controls. Ability to understand written sequences of operation. Ability to read low voltage wiring diagrams and controls flow diagrams. Niagara AX and/or Niagara 4 certification. Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL. Strong computer skills, including computer networking fundamentals. Good verbal and written communication skills. Customer-focused, results-oriented professional, and strong team player. Motivated self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized. Current first aid / CPR card. The typical hourly pay rate for this position ranges from $37.90 - $58.70 in MA. The range displayed represents the pay range for all positions in the job grade which this position falls. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depending on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. Wire, test, and troubleshoot control panels and individual electrical subcomponents. Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. Read and mark-up electrical schematics. Assist with maintaining all equipment programs database. Follow company and industry workmanship standards for assembly and electrical work. Follow Lock-Out Tag-Out (LOTO) procedures as-needed. Set up and troubleshoot simple ethernet communications networks. performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. Recommend component replacement or upgrades when items become obsolete or are at end of life. Assist in maintaining building SCADA systems to ensure all are functioning as designed. Continuously improve the reliability of current systems Ability to effectively communicate with co-workers and take direction from others. Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. Other job duties as assigned EDUCATION AND/OR EXPERIENCE: 2 - 4 years of relevant experience Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking Familiarity with cGMP/GMP. Strong understanding of automated manufacturing equipment and programming required. Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) Proven experience with troubleshooting equipment problems and performing complex system tests required. Rockwell certification preferred. Proficient in MS Word, Excel, PowerPoint required. Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. Valid Massachusetts Driver's License required. Know the proper use of hand and power tools. Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: Must have good vision and manual dexterity. Able to sit / stand for prolonged periods at a desk and working on a computer. Must be able to work in a cold environment and in tight areas. Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. Loud Noise Perform tasks in both cold and hot work environments. Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! Enjoy top-tier Medical, Dental, Vision coverage. Pamper your furry friends with Pet Insurance. Stay fit with our Wellness Plan and Free Gym Access. Boost your skills with Employee Tuition Reimbursement. Unlock endless opportunities with College Scholarship for dependents. Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. Receive a Generous 401k Company Match. Take advantage of Competitive Paid Time Off. Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. Receive Relocation Assistance for a Smooth Transition. Earn Rewards through our Employee Bonus Referral Program. Elevate Your Workplace Experience with Community Impact Opportunities. Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Join the Flexcon Team! $2,500 Sign on Bonus Friday, Saturday, Sunday 6:00AM - 6:00PM Flexcon Company, Inc. is a purpose-driven innovative company. A global, family-owned manufacturer of coated and laminated films and adhesives, products are used as functional components in manufactured goods and in graphics applications. Since 1956, Flexcon has supplied products for a wide range of industries including packaging, medical devices, automotive, durable labeling and more. We are currently hiring an Electromechanical Technician I for our Spencer, MA plant. We invite you to bring your drive for excellence, collaboration, integrity and respect. These core values allow us to support our culture of problem solving and continuous improvement. Flexcon is passionate about giving employees opportunities for career development and growth which includes dedicating time and resources to training, access to career latices, career development plans and more! What will you do in this role? Provide maintenance and mechanical support to production teams by troubleshooting equipment, understanding the instrumentation and perform repairs as needed and assemble, install, dismantle, and repair machinery, pumps, motors, hydraulic and pneumatic control systems. Troubleshoot, diagnose, and repair electrical systems, plan, and perform all required operations in preparation for installation, maintenance, and repair of electrical and electronic equipment within the facility and make proper connections to panels, electronic units, etc. Perform general repairs to all types of machines or equipment, tear down units, determine extent of troubles, repair or replace defective parts and reassemble. Replace parts such as bearing, gears, shafts, worn or broken units or equipment elements and install wire motors and drives for a variety of standard and special purpose machines and equipment. Must demonstrate the use of a multi-meter and have AC/DC drive experience. Move machines and equipment to the designated area using forklifts, hoists, and other equipment. Install all types of conduit, making bends, threading, and reaming where necessary. Perform ordinary machining operations using lathe, milling machine, grinder, drill press, etc. Perform general maintenance work in all buildings on Flexcon's campus Ensure all work is performed in compliance with local, state and federal regulatory requirements with industry best practices. Experience and commitment to fulfilling the preventative maintenance program including inspecting, cleaning, lubrication and adjustments to equipment and machines. Skilled in reading and working from blueprints, drawings, and schematics to complete tasks. What does it take to be successful in this role? H.S. Diploma or GED Knowledge of Allen Bradley equipment and software preferred. Use a laptop to connect to PLC's and drives to troubleshoot and make repairs. Excellent communication skills, both written and verbal Willing to get your hands dirty Some travel may be required What's in it for you? $2,500 sign on bonus Competitive Compensation & Annual Bonus Program Medical, Dental, Vision, and Life Insurance Tuition Reimbursement Program 401K Match Casual Work Environment Career Development Opportunities And more! By applying to this job and providing your mobile number, you agree to receive an initial text from Flexcon, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies. At Flexcon, we offer a comprehensive compensation and benefits package that includes base salary, healthcare coverage (medical, dental, and vision), life and disability insurance, 401(k) with company match, paid time off, wellness programs, and tuition assistance. Based on region, the expected salary range for this position is $24.01-$40.02 an hour. The posted salary range reflects a national pay scale and is intended to provide a general idea of compensation across different geographic regions. Actual compensation may vary depending on location, experience, and other job-related factors. We take regional market differences into consideration to ensure fair and competitive pay in each area. Equal Opportunity Employer, Protected Veterans, Individuals with Disabilities

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.