Design engineer jobs in Fair Oaks, CA - 512 jobs

SALARY: $80,000-$150,000+ (depending on experience) The Mechanical & Plumbing Engineer provides technical leadership, design services, and engineering coordination in support of estimating, preconstruction, project management, detailing, fabrication, and field operations. This role is responsible for developing cost-effective, code-compliant, energy-efficient, and constructible mechanical and plumbing systems that align with company standards, protect project scope and budget, and support successful project execution across all delivery methods, with a strong emphasis on design-build work . REQUIREMENTS: Professional Engineer (PE) license in Mechanical Engineering. 5+ years of experience in mechanical engineering design. Proven ability to design projects independently and manage multiple assignments. Strong background in plumbing and mechanical systems. Experience with design-build projects, ranging from unit change-outs to full ground-up builds. Ability to work on large TI (Tenant Improvement) projects and new building construction. DUTIES & RESPONSIBILITIES 1. Design cost-effective, energy-efficient mechanical and plumbing systems that meet client requirements, budget constraints, and company standards. 2. Provide complete, code-compliant system layouts, drawings, specifications, and engineering narratives for all project delivery methods. 3. Perform system calculations including loads, sizing, pressure drops, and energy analysis. 4. Maintain current knowledge of applicable mechanical, plumbing, energy, and building codes, including AHJ requirements. 5. Participate in energy evaluations, payback analyses, and sustainability initiatives (including LEED support where applicable). 6. Support estimating with design-build concepts, system layouts, technical clarifications, and engineering narratives. 7. Review plans and specifications for scope completeness, constructability, risks, and opportunities. 8. Review and validate proposed substitutions and “equals” prior to bid submission and document approved alternatives. 9. Assist estimating and project management with obtaining complete, compliant mechanical equipment quotes, including coordination with manufacturers' representatives. 10. Maintain a clear understanding of project scope, estimated cost, design budget, risks, and optimization opportunities. 11. Collaborate with detailing, fabrication, and field teams to ensure constructability and early system optimization. 12. Participate in project kickoff meetings, coordination meetings, and strategic planning sessions. 13. Provide technical support to project management and detailing teams on both design-build and plan/spec projects, including drawing interpretation and RFI production and review. 14. Participate in and oversee system optimization efforts throughout construction. 15. Support PlanGrid (or equivalent platform) population and maintenance in accordance with company procedures. 16. Prepare permit-ready, budget-compliant design drawings and documentation for design-build and special projects. 17. Coordinate with AHJs to obtain permits and resolve permitting issues, including in-person permit acquisition when required. 18. Support inspections and address code or compliance comments as necessary. 19. Develop and maintain professional working relationships with clients, vendors, suppliers, subcontractors, unions, and AHJs. 20. Manage external engineering and detailing resources when outsourced, including defining scope, schedule, and deliverables in coordination with project management. 21. Support equipment procurement and technical coordination throughout the project lifecycle. 22. Maintain and update company mechanical, plumbing, and engineering standards and specifications. 23. Participate in the annual refresh of company construction and design standards. 24. Apply lessons learned from completed projects to improve future designs and processes. 25. Collaborate across departments to continuously improve design quality, constructability, and efficiency. 26. Maintain professional conduct and effective communication with all internal and external stakeholders. 27. Report to work on time and maintain an excellent attendance record. 28. Execute all duties and responsibilities in a professional manner. 29. Comply with all company policies, procedures, and the Employee Handbook. 30. Perform other duties as assigned by Engineering Leadership, Preconstruction, or Executive Management.

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*

Job Responsibilities: The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include: Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch List Performing additional duties as assigned Job Requirements, Qualifications, Characteristics: FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects ( Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation

The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Purpose: The Project Engineer (PE) works with our team of other Engineers, Sales, and field staff to support Maxim's fleet of rental equipment. The PE will assess project lifting requirements and develop accurate technical drawings and supporting documentation for equipment installations and lift plans. The PE's responsibilities include the gathering information needed to produce detailed drawings and specifications, calculate crane and rigging requirements, as well as evaluate the feasibility and details for effective tower crane and hoist installations. Key Duties and Responsibilities: Reviews project drawings and plans to verify designs, perform calculations, and use modeling methods to ensure correct results. Develops crane layout and rigging details for crane lifts in private, commercial, and industrial settings. Liaises with Architects, Engineers, contractors, and Maxim team members to gather product information and to establish the job requirements for the project. Creates and presents structural overviews for upcoming projects and develops reports that include technical details for engineers as well as big-picture analysis. Uses AutoCAD and other drafting software programs to create 2D design documents and 3D models for individual components and overall structural plans according to client needs and project requirements for deliverables. Prepares documentation for customers covering project plans and progress, and other relevant information. Prepares ground bearing pressure calculations for track mounted and outrigger-based cranes. Perform other related duties as assigned or required. Minimum Requirements: Education: Bachelor of Science Degree in Civil or Mechanical Engineering, Naval Architecture, or other related engineering degree. EIT Certificate is preferred. Experience: 0 to 4 years of previous relevant engineering experience. Skills/Knowledge: Moderate level knowledge of applied geometry and statics. Advanced level organizational and problem-solving skills. Advanced level presentation and documentation preparation skills. Moderate level ACAD skills - 3D ACAD skills are preferred. Basic to moderate level knowledge of AISC Steel Construction Code and connection design. Basic to moderate level knowledge of structural analysis techniques. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, use hands to finger; handle or feel; and kneel; crouch; or crawl; and talk; or hear; push and/or pull; reach; climb; bend and/or stoop. Specific vision abilities required by this job include close vision, color vision, peripheral vision and depth perception. Limited travel is expected to visit project sites and observe or supervise equipment installations. Maxim is an equal opportunity employer and does not discriminate against employees or applicants for employment based on their race, color, religion, creed, sex, national origin or ancestry, age, sexual orientation, disability, genetic information or veteran status, as those terms are defined under applicable laws, or any other characteristic protected by law.

Project Engineer (Construction - Concrete Subcontractor) Job Type: Full-time Pay Range (Annualized): $60,000 - $90,000 per year. About the Role We are a concrete subcontractor seeking a Project Engineer to support our Project Management team based in our Rancho Cordova office. This role helps keep projects organized, documented, and moving-supporting communication, implementing document controls, evaluating change order requests and submittals of shop drawings, reviewing project schedules, etc. This position is ideal for someone looking to build or continue a career in construction management. What You'll Do Develop a full understanding of the scope and interdependence of all contract documents. Handle and submit Daily job reports, RFI's, and submittals. Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents. Evaluate change order requests including design changes, specifications and drawing releases and reports status. Evaluate submittals of shop drawings, material data and samples and take appropriate action based upon contract specifications. Review the project schedule and assist the project manager in the maintenance of it as requested. Assist the project manager in the maintenance of effective cost control mechanisms for the project. Complete project close out requirements in accordance with contract documents. Administer quality control program as outlined in the project procedures manual. Become familiar with safety requirements of the project and monitors compliance. Utilize safe work practices and follow directives, policies, and procedures for assisting and maintaining a healthy and safe work environment. Execute additional duties and responsibilities as assigned. What We're Looking For Ability to prioritize multiple tasks and adapt to changing requirements and priorities. A self-motivated and proactive team player. An organized and detail oriented individual. An skilled communicator who can interact effectively and professionally with all levels of employees, management, vendors, clients, and others. A dedicated team member who is comfortable with traveling, working on active jobsites, and who can work extended hours when required by project schedules or urgent circumstances. Qualifications 1-3 years construction experience. Ability to use a computer. Proficient with Microsoft 365 (Outlook, Word, Excel, etc.) and Bluebeam (or equivalent). Proficiency with PlanGrid or Procore are a plus. High School Diploma/GED required; Construction Management degree preferred Work Environment & Schedule The position reports on-site to an office located in Rancho Cordova, CA. The position requires travel to active construction jobsites as needed or required. Typical office hours are Monday - Friday, 8:00 - 5:00. The working schedule may vary by project needs. The company has an engaging culture and periodically attends or hosts events, on and off site. Benefits Medical, Dental, Vision, and Life Insurance. Employee Assistance Program. Profit Sharing & 401(K) Program. Discretionary Bonus Program. Paid Sick Leave (5 days per year) Paid Vacation Leave (starts at 2 weeks/year) Paid Holidays (9 days per year) Paid Volunteer Day Paid Bereavement Leave Equal Opportunity We are an Equal Opportunity Employer and consider applicants without regard to race, color, religion, sex, gender identity/expression, sexual orientation, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities.

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

*About us* Dokken Engineering is a small business in CONSTRUCTION\_ENGINEERING in Folsom, CA. We are professional, agile and our goal is to WE ARE DOKKEN est. 1986 We are civil and structural engineers, environmental planners, right of way agents. We are hydraulics specialists, community outreach experts, biologists, archaeologists, traffic and electrical engineers. We are design and delivery gurus. SENIOR ENGINEER (Water Resources) NOTE: Job duties and responsibilities are subject to change at any time and may include other tasks, as assigned. At Dokken Engineering, we're looking for the best and brightest to join our Water Resources team. Dokken Engineering delivers innovative engineering solutions for local, state, and federally funded projects throughout the state of California. Come join us to develop and implement innovative water resources strategies and solutions -- on projects in the community you live in, regionally, and throughout California. We are seeking a Senior Engineer/Water Resources for our Folsom HQ office. You will be providing a variety of professional civil engineering and hydraulics tasks. You will be performing engineering work and exercising independent judgment. Essential Functions: •Lead preparation of engineering analyses for potable water, sewer, recycled water, drainage,flood control, and agricultural irrigation systems •Lead the analysis and preparation of erosion control mitigation •Lead in the preparation of construction stormwater documents •Prepare and check quantity calculations •Oversee associate and assistant staff work on projects •Lead projects associated with water resources design and analyses Other Duties & Responsibilities: •Coordination with internal/external disciplines, utility companies, subconsultants and clients •Attend meetings, prepare meeting minutes, and address action items •Perform quality control for reports/projects •Lead marketing efforts occasionally Minimum Requirements: •Bachelor of Science in Civil Engineering or related field •California Professional Civil Engineer license •Minimum of 7 years of progressive water resources experience •CA driver's license Other Desired Knowledge, Skills & Abilities: •Strong working knowledge of hydraulic design software such as HEC-RAS, StormCAD, Innovyzesoftware, PondPack, CulvertMaster, WSPG, ArcGIS, and other similar programs •Strong understanding of basic and more complex water resources principles •Stormwater Practitioner/Designer (QSP/D) certification a plus •Effective interpersonal, verbal and written communication skills •Strong technical writing and analytical skills •Ability to work independently and as part of a team SENIOR ENGINEER (Water Resources) •Experience with roadway design and CAD software such as Microstation, In-Roads, or AutoCAD •Masters Degree in Civil Engineering or related field Physical Requirements: •Will sit, stand or walk for the entire duration of a workday •Will use telephone, computer system, email, or other electronic devices on a regular basis •Close vision, distance vision, peripheral vision, depth perception and ability to adjust focus •Work mostly indoors. Occasionally work outdoors in remote or urban environments •Usually work near others, such as in a shared office space •Occasionally wear protective gear, such as a hard hat •Sometimes work in noisy or distracting work environments •Occasionally travel to a project site by automobile and/or airplane •Occasionally work from a vehicle while at project sites FLSA Status: Full-Time Exempt Compensation: Competitive salary ranging from $120,000+ commensurate with qualifications and experience Benefits: •Comprehensive health plan including medical, dental and vision coverages •401(k) Profit Sharing Plan with generous employer match •Participation in Employee Stock Ownership Plan •Life, accidental death and long-term disability insurance Location: Schedule: Folsom HQ Office; In-Person or San Diego OffceFull-time; Monday to Friday, 8:00 a.m. to 5:00 p.m. Introductory/Probationary Period: At-Will Employment Equal Opportunity Employer Statement: It is the policy of this Company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, color, national origin, age, or disability. Such action shall include employment, promotion, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training. Job Type: Full-time Pay: From $120,000.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible spending account * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Experience: * Civil Engineering: 8 years (Preferred) License/Certification: * PE (Required) Work Location: In person

Purpose of the role: The primary role of the Project Engineer is to provide technical support and project coordination for capital projects and the Operations Engineering teams. Establish facility and layout design solutions, cost estimates, scopes of work, create specifications, and support Project Managers managing assigned projects to successful completion. In addition, the Project Engineer will provide support to help plants meet OEE and spoilage targets as needed. Key Responsibilities: Create, edit, and update AutoCAD drawings Develop detailed technical specifications for RFQ/RFP related to equipment, facility, and conveying purchases and installations. Develop SOW and project cost estimates for Capital Approval Requests (CAR) submittal. Manage SAP documents including drawings, purchase orders (PO), Goods Receipts (GR), and Invoices. Communicate effectively with other functional areas, plant operations teams, vendors, and contractors. Support Project Managers on Capex projects as needed. May assist managing projects on site in plants and other facilities. Manage vendors and contractors. Work with project and plant teams to ensure work is done safely, on time, and within budgets to meet project and business objectives. Support other functional areas as needed. Requirements: Bachelor's Degree in Engineering from an accredited College or University Minimum 5 year's work experience in Engineering (Mechanical preferred). Minimum 5 years work experience in high-speed manufacturing (Can-making/packaging preferred). Ability to work at the Ardagh Technical Center (ATC) located in Elk Grove Village, IL AutoCAD skills (highly proficient) Ability to travel 50%+/- of the calendar year (mostly domestic but could include some international travel) Self-starter with ability to work independently and in a team environment Strong written and oral communication skills Excellent interpersonal/team skills Project Management proficiency, experience using MS Project Preferred software experience: AutoCAD, MS Office (Excel, Word, PowerPoint, Outlook), MS Project, SAP Ardagh Metal Packaging is a leading global supplier of sustainable, infinitely recyclable metal beverage cans to brand owners. A subsidiary of sustainable packaging business Ardagh Group and a leading industry metal packaging company, Ardagh Metal Packaging employs more than 6,300 people across Europe, North America and Brazil, with sales of approximately $4.7 billion. Ardagh Metal Packaging believes that the success of our business depends on the success of our people. We strive to create working environments where our employees feel valued and can work to their full potential. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey! Ardagh Metal Packaging - North America has been and will continue to be an equal opportunity employer. All employment decisions are made without regard to sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race, creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent, or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status or any other basis prohibited by federal, state, or local law. Discrimination against any employee or applicant based on any of these factors is prohibited. The anticipated base annual salary range for this role is between $93,900 and $140,900 per year. This role is bonus eligible. The bonus incentive program is based on company meeting or exceeding targets. Please note that the salary range provided is a good faith estimate and is only applicable for roles that are based out of Illinois. The final salary will be determined after considering relevant factors, including, but not limited to, a candidate's qualifications, experience, and work location, where appropriate. Ardagh Metal Packaging also offer a comprehensive benefits program including medical, prescription, dental and vision coverage with an opportunity to earn a medical/prescription premium reduction by completing a qualified wellness activity. The Company also offers a 401(k) Plan. Ardagh Metal Packaging benefits may be amended at any time.

**P2S** stands as a provider of professional engineering services to a broad range of markets, including higher education, healthcare, ports/harbors, industrial, entertainment, commercial, laboratories, municipal, and federal sectors. Our specialties include electrical, mechanical, plumbing, fire protection, and technology integration. Our offered services range from engineering and commissioning to construction management. With over 300 dedicated employees, P2S is an internationally recognized leader in many of the key markets we serve. We provide a blend of innovation and technical excellence in delivering green solutions that enhance and sustain the built, natural, and social environments. Currently, we have offices in Long Beach, Seattle, Irvine, San Diego, Los Angeles, and San Jose. Are you a Mechanical Design Engineer with 5-10 years of experience looking to grow your career? P2S is an award-winning engineering firm that has been named a "Best Place to Work" for the past 15 years. Employment Type: Full-time Hybrid Schedule: 3 days In-office / 2 Remote Salary Range: $120,000- $150,000 (dependent on experience) Level: Mid Office: Seattle, WA, Long Beach, CA, Sacramento, CA, Irvine, CA **Position Summary** We are seeking an experienced Mechanical Design Engineer specializing in HVAC system design to join our engineering team. The ideal candidate will have 5-10 years of experience in the design and coordination of HVAC systems for commercial, institutional, and industrial buildings. This position involves leading mechanical design efforts, managing projects from concept through construction, and collaborating closely with architects, owners, and other engineering disciplines to deliver high-quality, coordinated designs. **Key Responsibilities** + Lead and perform HVAC system design, including load calculations, equipment selection, and ductwork/hydronic system layout. + Prepare and review drawings, specifications, and technical documentation in accordance with project and code requirements. + Coordinate designs with architectural, structural, electrical, and plumbing disciplines to ensure fully integrated building systems. + Conduct field surveys, evaluate existing mechanical systems, and develop retrofit or upgrade solutions. + Support project development from concept design through construction administration, including responding to RFIs and reviewing submittals. + Collaborate with clients and project managers to define scope, schedule, and budgets for mechanical portions of projects. + Mentor junior engineers and designers, providing technical guidance and quality assurance reviews. + Stay current with applicable building codes and industry standards. + Participate in internal design reviews, QA/QC processes, and project closeout documentation. **Qualifications** + Bachelor's Degree in Mechanical Engineering. + Professional Engineer (PE) license or ability to obtain within 12 months (preferred). + 5-10 years of progressively responsible experience in HVAC design within a consulting engineering or design-build environment. + Proficiency in Revit, AutoCAD, and HVAC load calculation software (e.g., Carrier HAP, Trane TRACE). + Strong understanding of HVAC system types (VAV, DOAS, hydronic systems, chilled/hot water plants, VRF, etc.). + Familiarity with energy modeling, sustainability, and LEED/ASHRAE 90.1 compliance (preferred). + Excellent written and verbal communication skills; ability to lead technical discussions with clients and project teams. + Demonstrated ability to manage multiple projects and meet deadlines in a collaborative environment. **Additional Preferred Skills** + Experience with healthcare, laboratory, higher education, or mission-critical facilities. + Knowledge of specification writing and Division 23 standards. + Basic understanding of building automation systems and controls integration. + Field experience with commissioning or construction administration. \#LI-CC1 #LI-Hybrid **What sets P2S apart?** For 15 years in a row, P2S has been regarded as a "Best Place to Work" by our employees. Why? Because we value satisfied employees just as much as satisfied clients. With competitive benefits, flexible work schedules, paid training/professional memberships, and more. - we aim to attract the best talent and keep them here Learn more about what it means to work at P2S: *************************** _P2S is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees._ **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy-up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Discount Program:** Company-sponsored discount program with savings on multiple lifestyle categories. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Salary** **Hiring Min Rate** **120,000 USD** **Hiring Max Rate** **150,000 USD**

About the RoleIn this role, you will support the development of the color, print and pattern identity for a product area. You will assist in developing seasonal print and woven concepts using a CAD system to create repeats, colorways, and scale variations of both purchased and original artwork. You'll need to partner closely with the design team and understand the brand aesthetic to achieve iconic and flawless concepts.What You'll Do Support in the development of seasonal print/color concepts and build out relevant print/yarn dye/ embroidery pattern stories from that concept that are on brand Input prints and yarn dyes in CAD system in multiple colorways and various sizes, maximizing efficiency and organization and meeting deadlines Maintain an understanding of print and CAD technology trends in the market, providing relevant imagery to communicate print trends and build seasonal color palettes and pattern boards Assist in preparing artwork packages that comply with production ready standards, providing well defined recommendations to meet business requirements Ask effective questions and solicit feedback to understand needs Complete structured assignments based on stated priorities, such as maintaining an organized project identification system and ordering supplies. Who You Are Basic knowledge of CAD systems/software/printers (NedGraphics; Illustrator; Photoshop), MS Office and Excel Basic understanding of print and textile designs, color matching and creation of colorways Strong organizational, time management and communication skills Awareness of product development from conceptualization to finished design for textiles Recognize and act on inconsistencies in data or results

Performs a variety of engineering duties to support manufacturing operations. Improves products, processes and applications to meet agreed-upon objectives. May redesign products to meet cost objectives, obsolescence and customer requirements. Participates actively in new product introduction, including influencing the design of the product and/or process to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes, scale-up, and managing the transition into production. Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product. In a process environment, interfaces with the chemical development lab and production to ensure small-scale development activities will scale to manufacturing equipment and systems. Coordinates the revision of standard operating procedures (SOPs) as required to support the transfer. Partners with procurement, external vendors and customers to improve/sustain products and processes to meet production timelines, quality policies, and customer expectations. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes. May direct the work of third-party vendors and/or partners to meet contract specified deliverables, performance or business objectives. May work with suppliers to ensure achievement of goals for cost, quality and delivery of parts and materials. May identify and manage ERP data such as bill of material and routing. May be responsible for designing, developing and enhancing microarray fabrication devices/equipment, processes and handling systems. May be responsible for scripting software code used in manufacturing tests or to program an instrument used for production of a product. May be required to use continuous improvement methodologies and understand quality regulations related to the life science industry. May be responsible for one or more of the following roles:Materials engineer: Applies knowledge of materials science to collaborate with and provide consulting to R&D, procurement and manufacturing engineering in the research, specification, sourcing and qualification of materials used in the design and production of Agilent products. Plans, evaluates and recommends technical, quality and cost specifications to meet design and business growth objectives and supply chain optimization. Identifies and qualifies alternative materials when needed. Work with suppliers to clarify specifications to meet quality, cost and manufacturability goals. Fabrication manufacturing engineer: Designs, develops and enhances microarray fabrication devices/equipment, processes and handling systems. Monitors fabrication processes for consistency in yield performance and machine uptime and establishes clear guidelines for equipment operating limits. Modifies processes and equipment as needed to improve control, quality, production output and machine uptime. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Analyzes automated tool and QC data to determine root cause of production or quality issues. Manufacturing machine controls software engineer: Provides software solutions in manufacturing fabrication environment. Designs and maintains software code for operating systems or applications for operating automated manufacturing equipment or devices to enable high-throughput, high-quality production of company products. Resolves issues to ensure uninterrupted demand fulfillment. Manufacturing data management and analytics engineer: Defines, develops, improves, supports and implements in house and commercial software solutions to support the manufacturing of products in a cost-effective and compliant manner. Participates in the definition of processes and solutions to provide software-based support for manufacturing operations. Supports and implements the transition of software solutions from requirements to full production through the entire life cycle of the software use. Provides and supports an infrastructure to run the software needed for manufacturing. Defines and recommends appropriate software solutions for manufacturing scenarios. Performs validations and associated activities for all software and technical based solutions. Develops and delivers reporting, analytics and database solutions. Qualifications Bachelor's or Master's Degree or equivalent. Post-graduate, certification and/or license may be required. 4+ years relevant experience for entry into this level. Additional Details This job has a full time weekly schedule. Applications for this job will be accepted until at least January 20, 2026 or until the job is no longer posted.The full-time equivalent pay range for this position is $110,424.00 - $172,538.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit *************************************** Required: OccasionalShift: DayDuration: No End DateJob Function: Manufacturing

Chemical Engineer About the Job Thatcher Company is seeking a Process Engineer to join our engineering team in Sacramento, California. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do Promote understanding and application of safety practices. Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. Work with operations and manufacturing experts to resolve technical issues. Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations and datasheets for instruments and relief devices. Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. Manage small capital projects from design through startup. Qualifications Basic Qualifications Bachelor's degree in chemical engineering with 5+ years of experience in a process facility. Travel =< 20% What Will Put You Ahead Experience in process controls, project management, or process safety management. Experience with AutoCAD LT, AFT Fathom, or SolidWorks. Experience in process industry/manufacturing. Why Thatcher is right for you Competitive salary $100-125K annualized 100% company-funded Profit-Sharing Plan (up to 25% of salary annually) 401(k) with traditional and Roth contribution options Comprehensive benefits: medical, dental, vision, life insurance, short- and long-term disability, HSA/FSA, 3+ weeks of PTO, and paid holidays Education reimbursement and ongoing professional development. The pay for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience). Applications will be accepted while this position is posted on our Careers website. Thatcher is an Equal Opportunity/Affirmative Action employer, including protected Veterans and individuals with disabilities.

Details: We are looking for either a Project Engineer I or II depending on your experience. Please read below and apply if you feel that you have the right fit. We look forward to speaking with you. Project Engineer I: Assists with the delivery and completion of capital projects on time and within budget, working with external agencies and utilities. Project Engineer II: Manages multiple projects independently, overseeing the completion of capital projects, and may supervise support staff. Essential Duties & Responsibilities Project Engineer I: Assist with the oversight of construction activities for assigned capital projects. Coordinate internal and external resources to meet project goals. Monitor project schedules and budgets, recommending corrective actions when needed. Conduct quality control and inspection activities. Prepare periodic progress reports. Perform other duties as assigned. Project Engineer II: Oversee construction of multiple capital projects. Work independently on smaller projects as needed. Prioritize assigned projects and balance the needs of various functions. Monitor and adjust project schedules and budgets, implementing corrective actions. Provide oversight of quality control and inspections. Prepare and present progress reports. May supervise or direct support staff as needed. Minimum Qualifications Project Engineer I: Bachelor's degree in civil, mechanical, or environmental engineering, or a related field. Experience with project management software (MS Project preferred). Strong oral and written communication skills. Project Engineer II: Bachelor's degree in civil, mechanical, electrical, or environmental engineering, or a related field. Professional Engineer registration or Project Management certification preferred. At least 2 years of construction management experience in public works or utility projects. Proficiency in project management software, with knowledge of MS Project preferred. Strong communication and analytical skills. Qualities of a Successful Project Engineer I/II: Flexible, accountable, and passionate about work. Willingness to learn and grow. Strong customer service and "can-do' attitude. Highly organized and goal-driven. Approachable with strong interpersonal skills. Technical Knowledge & Competency Requirements Project Engineer I: Knowledge of project management, construction management, planning, and budgeting. Familiarity with fire department and local agency regulations. Ability to analyze project budgets and schedules and communicate effectively. Must be willing to travel as required, including occasional overnight stays and full-day trips. Project Engineer II: Working knowledge of project management, construction practices, and regulatory requirements. Strong ability to analyze project data and communicate findings effectively. Ability to make sound independent decisions and manage multiple projects simultaneously. Willingness to travel as required, including overnight stays and full-day trips. Please apply today for an immediate and confidential conversation! PTS is an Equal Opportunity Employer #IND1

Plans, directs, coordinates, and performs a wide variety of duties in the determination, implementation, optimization, and continuous improvement of new and existing manufacturing processes. Emphasis will be upon the design, fabrication, and implementation of automated and semi-automated processes ESSENTIAL JOB FUNCTIONS Identify and implement new automated processes into manufacturing Develop new processes or improve existing processes and layouts to improve process capability, yield, ergonomics, safety, reliability, and quality Analyze existing processes and implement modifications to reduce costs through improved manufacturability and process ability, efficiency, simplification, and standardization Troubleshoot product, facility, equipment, process, and quality problems and design and implement appropriate solutions Develop and write operation and maintenance instructions and manuals Maintain reliable and consistent attendance, including being punctual and dependable, in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform the job successfully. Follows all safety procedures required in the work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to the immediate manager. Able to understand and demonstrate the Cambro company culture, display the company's core values (Safety, Quality, Respect, and Service). Understands the department's key performance indicators and contributes to achieving these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. Hot Stamp design, process, and Hot stamp fixture design QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor of Science degree in Mechanical, Manufacturing, Automation, or Industrial Engineering or verifiable experience and vocational training in automation applications Minimum 7+ years of manufacturing engineering experience. Ability to apply concepts of advanced math and geometry, including statistics. Must be able to analyze and make decisions based on collected data. 2D or 3D drawing capability for automated equipment design on AutoCAD or SolidWorks is Basic knowledge and understanding of most industrial codes required (ANSI, ADA, OSHA, NEC, NFPA, IBC, ISO, DIN) Ability to design and write electrical schematics Ability to design, fabricate, and wire electrical control panels Familiarity with Microsoft Word, Excel, Project, and PowerPoint. Ability to create and edit text documents, spreadsheets, presentations, and schedules Digital photography and file manipulation of digital images experience Working knowledge of pneumatic control circuits and electro-pneumatic troubleshooting, electrical control panel assembly and wiring, electrical control circuit design and troubleshooting, Ability to manage multiple conflicting and sometimes changing priorities. Has the ability to adapt quickly to new projects and assignments while being dedicated and an innovative problem solver. Is also a creative thinker who is results-oriented, focused, and attentive to detail and accuracy. PREFERRED QUALIFICATIONS Knowledge of safe operation of conventional mills and lathes for the fabrication of machine components and fixtures. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes, or chemicals Working at heights Use of special visual or auditory protective equipment PPE Requirements Safety glasses Steel-toe slip-resistant shoes Hearing protection (e.g. earplugs, earmuffs) . COMPENSATION RANGE: $85,000 - $110,000 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

and are looking for growth and opportunities? Look no further! We are a thriving commercial construction company founded in 1977. Our Mission and Vision: To be the most trusted building partner in the communities that we serve. This is our goal in EVERYTHING that we do. This is how we know we are successful as a company. To reach this, we understand that our relationships are everything. Our relationships with owners, each other, and our community. In our actions, we commit to: Be there for each other Support our communities Be transparent Make things right S+B James Construction has been setting the standard for excellence in healthcare, education, life sciences, commercial, retail, industrial, and public works construction in Southern Oregon and Northern California. S+B James is an equal opportunity Employer. All applicants must be authorized to work in the United States. H1B Visa Sponsorship is available for this position. Opportunities for Position Location: Bay Area (San Francisco, Oakland, Berkeley, etc.) Sacramento (including Central Valley) Southern California (including Moreno Valley) Responsibilities: Assist the Project Manager and Superintendent in the implementation of SBJ policies and execution of the project. Preparation, monitoring, and updating project schedules. Working with the project team to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builds, testing and inspection logs, RFI logs, and change order logs. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Preparing agendas, documents, meeting minutes, and actions for various meetings including but not limited to owner/architect/contractor meetings, subcontractor coordination meetings. Participating in project cost control Supports a culture of creativity and accountability in the business unit - solve problems in new ways while keeping organizational commitments. Actively promote SBJ's safety culture and practices. Provide insight and supervision for the development and maintenance of construction safety policies, procedures, and practices. What We're Looking For: Valid driver's license. Proficient computer skills in Microsoft Office, Procore, and scheduling software. Ability to read and interpret documents such as plans and specifications, safety rules, operating and maintenance instructions and procedure manuals. Knowledge of construction principles/practices required. Self-starter with strong organizational, file management, and time management skills. Proven ability to prioritize and manage multiple projects in a team-based environment Ability to problem solve and develop outcomes with multiple stakeholders A knowledge seeker who will ask why and research things they do not understand Someone who can work hard and play hard! Full Time / Salary Range: $80k- $95k per year depending on experience Benefits: 100% Health insurance for Employee 401(k) with company match Dental / Vision insurance Paid time off Sick Days Wellness Days Paid Holidays Discretionary Bonus Company sponsored events in the community Recruiting Bonuses Company Credit Card Phone Allowance Annual Christmas Party with Hotel Use of SBJ Kings Suite - Light the Beam!

ZEMINI's client, Northampton H20, is seeking a Heating & Plumbing Engineer!About Northampton H20 At Northampton H2O Ltd., our aim is to provide all customers with nothing but the best service at the right price. We value our customer's opinion and will always listen to their needs and requirements. Northampton H20 serves customers in the Northamptonshire areas. About the Heating & Plumbing Engineer position Join Northampton H2O Ltd, a vibrant, growing local business! Northampton H20 seeks energetic, skilled, dedicated engineers to provide installation, repair and maintenance services for residential buildings. This includes a wide range of plumbing tasks such as boiler serving, boiler repair, boiler install, some plumbing tasks and working as part of our teams on the larger sites. You should have a thorough knowledge of plumbing and heating systems and be able to work on your own and part of a team and efficiently with great attention to detail. We also expect you to be patient, customer service savvy, look for solutions and possess a practical mind. Engineer responsibilities are: Test pipe systems and fixtures for leaks Boiler breakdown servicing and repairs Boiler installations Hot and cold water systems Unvented systems General plumbing Engineer requirements are: Experience and skills Gas safe qualified Previous experience with gas systems and/or multi-discipline maintenance Plumbing and heating certifications Minimum of two (2) years experience as an engineer, with four (4+) or more years preferred. specifically: Be able to read plans and drawings A good understanding of power and hand tools Due to a requirement to local travel within this role, candidates must hold a full and current driving licence and have the ability to drive a company van. We are also looking for: Capability to work well under pressure with minimum supervision A flexible approach to work, with excellent communication Ability to work effectively as part of a team and on an individual basis Loyal and trustworthy individuals Customer service oriented, showing care and concern for customers and their homes What H20 offers: Competitive salary up to £40,000 (depending on skills and experience) Employer contributed pension Company van, fuel card, trade cards for business use; uniform and PPE will also be provided 28 days annual leave (Inc. statutory bank holidays) Environment where you are valued NOTE: We are considering applicants already located in or near our current service areas only; applicants must possess current authorization to work in the UK, as we do not offer sponsorship at this time.

MINIMUM EXPERIENCE: Mid-Level TRAVEL: Yes JOB TYPE: Full Time SALARY TYPE / HOURLY RATE: Salary Description The Project Engineer is a key component in the Project Management team workflow in terms of document control, record keeping, and clear communication with clients, subcontractors, vendors, and all Haggerty Construction Inc. (HCI) team members from project inception to completion. The minimum requirements for this position include, but are not limited to, the following: RESPONSIBILITIES Preconstruction Attend onsite and offsite design meetings with clients, consulting firms and/or engineers, and record meeting minutes Assist in the preparation of all necessary bid requests for design professionals as may be necessary Collaborate with Preconstruction Assistant and drafters to communicate design information and/or specific client requests as needed In early budgeting phase and final/hard bid scenarios, coordinate subcontractor bids, including preparing bid invitations, reviewing incoming bids for scope and pricing, scheduling site visits with subcontractors to review the scope of projects, acquiring best pricing from subcontractors and suppliers, and developing bid presentations Manage RFP process inclusive of pre-bid RFI tracking and document control Create and prepare takeoffs, estimates, and proposals for Project Manager review effectively with the right amount of detail and explanation of individual components of the budget and identify deficiencies in scope coverage Ensure a preliminary construction schedule has been developed for each estimate in collaboration with Project Manager Ensure project plans are submitted and retrieved from project specific authorities having jurisdiction (AHJ) Ensure prompt distribution of plan check comments with response deadlines with direction from Project Manager Review AHJ websites to download additional documents and/or required forms during plan check Construction Collaborate with Project Administrator for the creation of subcontracts, work orders, and purchase orders Write subcontracts and purchase orders under direction from Project Manager Assist project manager with scheduling Project kickoff meetings Attend onsite and offsite construction meetings with clients, consulting firms and/or engineers, and record meeting minutes Prompt and accurate distribution of project schedules, drawings and addenda, and other project specifications to subcontractors and vendors as required. Ensure subcontractor submittals match the project plans, specification book, and/or plan set Maintaining and updating the overarching project schedule and distributing to subcontractors Work with Superintendent to address daily construction issues and prepare/distribute RFIs as needed Price and prepare all job specific change orders as directed by the Project Manager Collaborate with Project Administrator during monthly billing procedures Maintain consistent communication rhythms with job specific subcontractors, Superintendents/Foreman, and vendors to ensure timely and profitable project completion Safety: Collaborates with Superintendent to complete a job hazard analysis for each project. Assists in achieving a zero-injury safety culture through the support of HCI's Safety Program Actively participates in safety meeting and training sessions Proactively identifies and communicates safety improvements and hazardous conditions to maintain a safe, healthy work environment and meet HCI safety standards Reviews all jobsite safety meeting notes Document Control Preparation, collection, tracking, recirculation, logging, and organization of all project-specific Schedules, Request for Information (RFI's), Submittals, and Construction Documents (CD's) Organization and logging of all Plan Sets ensuring the most current set is being referenced in Procore Maintaining organized job project folders on HCI's main server/repository and ensuring all project documents are available in Procore Accurate preparation of subcontractor contracts and purchase orders in compliance with the bid documents, budget, and estimate in HCI's current construction management software program Review Daily Reports and ensuring pertinent information is captured and addressed and then routed to the project specific Project Manager for approval Preparation and logging of all RFIs and Change Orders Organizes and labels as-builts, field, and office files for archiving upon completion of project Assists with data entry, print and distribution of master look ahead schedules Preparation of subcontractor bid packages as needed Ensuring bids received provide complete scope coverage by qualified subcontractors and material vendors Ensure the budget/proposal package is complete and accurate prior to delivery to client Reports To The Project Engineer reports directly to the Senior Project Manager Job Specific Required Skillset Excellent strategic thinking and decision-making skills Ability to foresee items and know and understand what lies ahead Ability to get the job done Strong facilitation and presentation skills Proven organizational skills and impeccable attention to detail. Must be able to manage multiple tasks and have excellent follow up skills both internally and externally. Critical thinking to prioritize and manage workload scope. Strong work ethic, deadline driven and a “Can Do Attitude”. Continued knowledge and up to date insight on changes & trends in methods of construction and materials, construction costs, wage rates, fringes, and working rules Ability to understand and grow experience with ALL types of construction and knowledge of industry practices, process, and standards Must engage in ongoing professional development, leadership, and position specific training and education Working knowledge of Microsoft Office programs including, but not limited to, Outlook, Word, Excel, and Project Working knowledge of Procore or Autodesk Construction software Ability to create and work with Adobe PDF's Ability to read and understand blueprints and perform take-off's General Requirements for All Positions: Ability to work independently as well as part of a larger team Excellent written and verbal communication skills and ability to understand the same Excellent listening and understanding skills Must be proactive, well organized, and have a strong ability to prioritize Extreme attention to detail Must be able to manage multiple tasks and have excellent follow up skills, both internally and externally Must be self-motivated, punctual, and professional in both presentation, appearance, and speech Provide solution-based responses to issues Able to lift a minimum of 25 pounds Fluent in the English language Reliable personal transportation and a motor vehicle driving record that is consistent with HCI's and insurance carrier's standards and policies Educational and Experience Considerations: Requires a minimum of 5 years of experience in the construction industry with a strong background in the preconstruction process, planning, design phase management, and managing multiple projects simultaneously Degree or Certification in Construction Management (preferred)

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Manufacturing Engineer II position is located in Dixon, IL. This position participates in and contributes to process and product modifications, standards, and improvements. The Engineer II position utilizes knowledge of manufacturing equipment and processes to develop expertise in increasing product quality, output, and cost effectiveness. You will utilize lean tools and thinking in improving value streams, conduct workflow analysis, and lead process improvement and change within the organization. Qualified candidates must be able to work an on-site schedule at our Dixon, IL facility. Role Responsibilities: * Supports the appraisal of new product ideas to determine their potential to address customer needs and to achieve goals in revenue growth and market share. * Designs, analyzes, tests, and integrates components to produce final designs; and evaluates the design's overall effectiveness, cost, reliability, and safety. * Develops, executes, and evaluates fitness for use testing, product specifications, and process validation plans. * Works in cross-functional teams and is responsible for all phases of assigned standard engineering projects, ensuring the successful conclusion of all phases within an appropriate time and at an appropriate cost. * Prepares or secures and reviews cost estimates, completes required cost and equipment information, and writes appropriation requests. * Provides input on technical program objectives and product specifications to meet manufacturing needs. Keeps informed of new or improved designs, methods, and techniques, materials, and other advances in engineering technology. * Provides technical support and collaboration to manufacturing, production, and clients through customer visits and/or consultations; ensures product design meets manufacturing and/or procurement requirements. * Participates in short-range planning and technical forecasting. Prepare and present technical results and information in a clear and concise manner through drawings, specifications, reports, and oral presentations to meet Company and customer needs. * Ensures compliance with government and organization engineering standards Minimum Qualifications: * Bachelor of Science Degree in Engineering, from an accredited College or University * 3+ years of hands-on experience of industrial manufacturing or engineering Preferred Qualifications: * FAA Certification experience * Experience with Oracle or other ERP systems Annual Salary Range: $71,900 - $91,700. Actual salaries will vary based on several factors including, but not limited to applicable work experience, training, education, performance. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Lean, Manufacturing, Engineering Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.