Electrical engineer jobs in Albany, OR - 138 jobs

The Data Center Engineering Analytics and Modeling (DCEAM) organization is seeking a Power Systems Engineer to lead grid to rack electromagnetic transient (EMT) simulations for AI data centers. You will develop detailed MV/LV power system models from the utility source through the IT load to analyze transient performance, harmonic distortion, protection, grounding, and UPS-generator interactions. These models will be used to ensure power quality, stability, and reliability across all operating modes. You will support projects from site selection and design through commissioning and integrated systems testing (IST), working closely with design, operations, vendor, and utility teams. **Responsibilities** **Responsibilities** + Develop & Maintain EMT Models: MV sources; transformers (saturation/inrush); grounding; cables; UPS/DRUPS; generators (AVR/governor); STS/ATS; Busway/PDU/RPP; filters/FACTS; VFD-driven HVAC. + Conduct Dynamic Performance and Transient Studies: Generator-UPS Compatibility; Large block load step (GPU ramp-up) response; Transformer inrush and load transfer; Generator start and transfer sequences; UPS input/output switching and bypass events; Black Start; Frequency Stability; Rotor-Angle Stability; Voltage Stability / Voltage Ride Through. + Conduct Power Quality Studies: Flicker / Voltage Step Analysis; Harmonic / Resonance scans and filter application; Inrush / Ferroresonance; Converter Limited Fault Behavior; Power Factor Correction. + Conduct Steady-State Analysis: Load flow / Voltage Drop; Short Circuit / Equipment Evaluation; Protection & Coordination; Arc Flash Hazard Analysis; Grounding Study + Support generator and UPS vendor coordination for paralleling, synchronization, and control system stability. + Generate FMU models for multi-domain simulations + Establish modeling standards, libraries, QA, version control; automate cases, sweeps, and reporting. + Review vendor black-box models; document assumptions and deliver clear, actionable reports. + Ensure compliance with internal security, data handling, and licensing policies for tools and models. + Collaborate with cross-functional teams (mechanical, controls, commissioning, etc.) to ensure electrical system stability under dynamic load profiles. + Author study reports and technical memos for design review and operational readiness. **Minimum Requirements** + BS in Electrical Engineering (power systems or power electronics); 3-5+ years EMT studies. + Proficiency in one or more: PSCAD/EMTDC, EMTP-RV, PowerFactory (EMT), ATP-EMTP, Simulink/Simscape. + Experience modeling UPS/inverters and synchronous generators; transformer saturation/inrush. + Knowledge of protection basics, grounding, harmonics, converter controls (PLL, current/voltage loops). + Ability to interpret one-lines, settings, control block diagrams, and test data. + Scripting for automation/data analysis (Python, MATLAB, or similar). + Familiarity with standards: IEEE 519, IEEE 1453/IEC 61000-4-15, IEC 61000 series, NEC/NFPA 70 or IEC 60364, IEEE C37. **Preferred Qualifications** + PhD/MS in Power Systems/Power Electronics or equivalent experience. + Professional Engineer (PE) license or eligibility (Electrical, Power discipline) + Data center design/operations (UPS topologies, STS transfers, generator paralleling, coordination). + Familiarity with AI/GPU rack power modeling, DC bus design, and bipolar bus applications. + Real-time/HIL (RTDS, OPAL-RT/HYPERSIM, Typhoon HIL) and hybrid RMS-EMT workflows. + Advanced harmonic/resonance mitigation (active/tuned filters, STATCOM/SVC). + Protection engineering for converter-rich systems and low-fault-current scenarios. + Experience with Git-based model governance and reproducible reporting. + Understanding of battery energy storage systems (BESS) and lithium-ion UPS topologies. + Knowledge of Microgrid architectures, and Distributed Energy Resources (DER); including their control strategies, operational modes (grid-forming, grid-following, islanded, and parallel operation), and integration with critical data center electrical infrastructure. + Knowledge of NEC 700/701/708 critical power distribution requirements. + Experience working with OEM data (Eaton, Schneider, ABB, Vertiv, Cummins, MTU). + Vendor model acquisition/validation under NDA; understanding of licensing/IP. Disclaimer: **Certain US customer or client-facing roles may be required to comply with applicable requirements, such as immunization and occupational health mandates.** **Range and benefit information provided in this posting are specific to the stated locations only** US: Hiring Range in USD from: $97,500 to $199,500 per annum. May be eligible for bonus and equity. Oracle maintains broad salary ranges for its roles in order to account for variations in knowledge, skills, experience, market conditions and locations, as well as reflect Oracle's differing products, industries and lines of business. Candidates are typically placed into the range based on the preceding factors as well as internal peer equity. Oracle US offers a comprehensive benefits package which includes the following: 1. Medical, dental, and vision insurance, including expert medical opinion 2. Short term disability and long term disability 3. Life insurance and AD&D 4. Supplemental life insurance (Employee/Spouse/Child) 5. Health care and dependent care Flexible Spending Accounts 6. Pre-tax commuter and parking benefits 7. 401(k) Savings and Investment Plan with company match 8. Paid time off: Flexible Vacation is provided to all eligible employees assigned to a salaried (non-overtime eligible) position. Accrued Vacation is provided to all other employees eligible for vacation benefits. For employees working at least 35 hours per week, the vacation accrual rate is 13 days annually for the first three years of employment and 18 days annually for subsequent years of employment. Vacation accrual is prorated for employees working between 20 and 34 hours per week. Employees working fewer than 20 hours per week are not eligible for vacation. 9. 11 paid holidays 10. Paid sick leave: 72 hours of paid sick leave upon date of hire. Refreshes each calendar year. Unused balance will carry over each year up to a maximum cap of 112 hours. 11. Paid parental leave 12. Adoption assistance 13. Employee Stock Purchase Plan 14. Financial planning and group legal 15. Voluntary benefits including auto, homeowner and pet insurance The role will generally accept applications for at least three calendar days from the posting date or as long as the job remains posted. Career Level - IC4 **About Us** As a world leader in cloud solutions, Oracle uses tomorrow's technology to tackle today's challenges. We've partnered with industry-leaders in almost every sector-and continue to thrive after 40+ years of change by operating with integrity. We know that true innovation starts when everyone is empowered to contribute. That's why we're committed to growing an inclusive workforce that promotes opportunities for all. Oracle careers open the door to global opportunities where work-life balance flourishes. We offer competitive benefits based on parity and consistency and support our people with flexible medical, life insurance, and retirement options. We also encourage employees to give back to their communities through our volunteer programs. We're committed to including people with disabilities at all stages of the employment process. If you require accessibility assistance or accommodation for a disability at any point, let us know by emailing accommodation-request_************* or by calling *************** in the United States. Oracle is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law. Oracle will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

**The 'Apply with SEEK option' will be utilized for International applicants, mainly Australia. If this does not apply to you please use the 'Apply' option.** IF YOU CARE, THERE'S A PLACE FOR YOU HERE EFI Global is a full-service engineering, fire investigation, environmental, health and safety, and specialty consulting services firm serving a variety of industries in both the public and private sectors. Over the last four decades, we have grown from a boutique firm specializing in handling insurance fraud and arson cases and providing expert witness testimony, into a recognized global leader in engineering failure analysis, origin-and-cause investigations, environmental consulting, laboratory testing and specialty consulting. Our forensic investigation, engineering and environmental services teams around the world share a dedication to expertise, quality and demonstrating to customers that caring counts . Each of our more than 700 professional engineers, fire investigators, architects and scientists was selected for their technical proficiency, in-depth industry knowledge and commitment to professional integrity. Together, our diverse backgrounds and collective insights empower clients to make better-informed business decisions. EFI's combination of global solutions and local expertise has earned the firm a reputation for delivering timely responses that consistently meet our clients' expectations-anytime, anywhere. Click here to learn more about EFI Global. **PRIMARY PURPOSE** **:** To be responsible for the profitably of investigating events, systems, devices, and/or failures and providing expert opinions. **With a robust background in electrical engineering and a keen expertise in forensic analysis, this professional will bring a wealth of experience investigating electrical failures, diagnosing complex troubleshooting scenarios, and assessing incidents related to power distribution and generation. Adept at analyzing intricate circuitry, evaluating arc flash events, and understanding the nuances of lightning strikes and electrical fires, they are skilled in identifying root causes and devising comprehensive solutions. Their comprehensive knowledge of electrical components and systems, paired with a meticulous approach to both preventative and reactive engineering, ensures reliable performance and insightful evaluations across a wide spectrum of electrical challenges. Candidate must hold P.E. license in resident state.** **PRIMARY PURPOSE** **:** **To be responsible for profitably, ethically and scientifically investigating events, systems, devices and/or failures and providing expert opinions; to provide guidance and leadership on complex engineering assignments.** **Are You An Ideal Candidate? We are looking for enthusiastic candidates who thrive in a collaborative environment, who are driven to deliver results, are customer oriented and naturally empathetic.** **Apply your engineering knowledge and experience to investigate and assess complex failures in the context of an energetic, people focused, entrepreneurial culture.** **Deliver comprehensive engineering analyses to clients who represent virtually every industry and comprise some of the world's most respected organizations.** **Leverage EFI Global's broad, global network of experts to both learn from and to share your insights.** **Be a part of a rapidly growing, industry-leading global company known for its excellence and customer service.** **Take advantage of a variety of professional development opportunities that help you perform your best work and grow your career.** **Enjoy flexibility and autonomy in your daily work, your location, and your career path.** **Access diverse and comprehensive benefits to take care of your mental, physical, financial, and professional needs.** **ESSENTIAL FUNCTIONS and RESPONSIBILITIES** **Provides guidance and leadership to newer colleagues and/or those with less experience on complex engineering assignments.** **Surveys property, casualty and liability losses, typically at residential and commercial buildings and loss scenes.** **Conducts investigations to determine the root cause of events and failures.** **Works closely with engineers and investigators to produce detailed reports, drawings, and/or outline the cause and origin of losses and damages. ** **Develops plans, reports and drawings to meet client's needs and/or determine and document the failure analysis and causation of failures.** **Provides expert testimony in a court of law and/or in depositions.** **Determines applicable engineering practices to fulfill the prescribed scope of work, project specifics, timelines, and cost estimates for the professional services provided.** **Documents and maintains billable hours on a time and expense basis for failure analysis and engineering projects for clients.** **Collaborates with sales and operations managers, architects, developers, insurance adjusters, claims managers and attorneys to develop demand for your professional services.** **Collaborates with EFI's national team of forensic experts to leverage experiences and assist on projects.** **ADDITIONAL FUNCTIONS and RESPONSIBILITIES** **Performs other duties as assigned.** **Supports the organization's quality program(s).** **QUALIFICATIONS** **Education & Licensing** **Bachelor's degree from an accredited college or university required.** **Professional Engineering (PE) license is required.** **Experience** **Eight (8) years of experience or equivalent combination of experience and education required including two (2) years of engineering experience specifically in failure analysis and forensic engineering plus 2 years in insurance and/or risk management services industry.** **Skills & Knowledge** **Excellent oral and written communication** **PC literate, including Microsoft Office products** **Analytical and interpretive skills** **Strong organizational skills** **Excellent interpersonal skills** **Ability to work independently or in a team environment** **Ability to meet or exceed Performance Competencies** **WORK ENVIRONMENT** **When applicable and appropriate, consideration will be given to reasonable accommodations.** **Mental** **: Clear and conceptual thinking ability; excellent judgment and discretion; ability to handle work-related stress; ability to handle multiple priorities simultaneously; and ability to meet deadlines** **Physical** **:** **Must be able to stand and/or walk for long periods of time.** **Must be able to kneel, squat or bend.** **Must be able to work outdoors in hot and/or cold weather conditions.** **Have the ability to climb, crawl, stoop, kneel, reaching/working overhead,** **Be able lift/carry up to 50 pounds** **Be able to push/pull up to 100 pounds.** **Be able to drive up to 4 hours per day.** **Auditory/Visual** **: Hearing, vision and talking** **NEXT STEPS** **If your application is selected to advance to the next round, you will receive an e-mail notification or phone call from a recruiter to schedule an initial call.** Always accepting applications. _As required by law, Sedgwick provides a reasonable range of compensation for roles that may be hired in jurisdictions requiring pay transparency in job postings. Actual compensation is influenced by a wide range of factors including but not limited to skill set, level of experience, and cost of specific location. For the jurisdiction noted in this job posting only, the range of starting pay for this role is $115,000-$165,000_ _. A comprehensive benefits package is offered including but not limited to, medical, dental, vision, 401k and matching, PTO, disability and life insurance, employee assistance, flexible spending or health savings account, and other additional voluntary benefits. Always accepting applications._ Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Diego Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, the California Fair Chance Act, and all other applicable laws. The statements contained in this document are intended to describe the general nature and level of work being performed by a colleague assigned to this description. They are not intended to constitute a comprehensive list of functions, duties, or local variances. Management retains the discretion to add or to change the duties of the position at any time. Sedgwick is an Equal Opportunity Employer and a Drug-Free Workplace Our business is founded on people with the best technical skills and outstanding industry knowledge and we strive to employ and retain exceptional talent. EFI Global is an equal opportunity employer welcoming applications from all qualified persons. If you are interested in working for us, please visit our job board.

R10077381 Electrical Engineer (Open) How will you CONTRIBUTE and GROW? Airgas is HIRING! Airgas is Hiring for a Remote Electrical Engineer! At Airgas, we RESPECT, HONOR and VALUE diversity. We are invested in cultivating a dynamic and inclusive culture. We are looking for YOU! * Strong passion for fostering an environment of Diversity, Inclusion and Respect. * Experience with developing, contributing, and supporting Airgas' commitment to a World Class Service, exceeding customer expectations and building brand loyalty. * Pay Range: $110,000-130,000/year + bonus * Travel: Up to 50%/0-10 days notice Excellent Benefits: Airgas offers a full benefits package that includes: Medical, Dental, Vision, Life, AD&D, Short Term and Long Term Disability Insurance, Vacation, Sick, Paid Holidays, 401(k) Retirement Plan with company match, Tuition Assistance and much more! Benefits Start after 30 days of employment Recruiter: Nardia Francis / ***************************** / ************ How will you CONTRIBUTE and GROW? Job Description Summary: The Electrical Engineer is responsible for the operations and maintenance support of electrical power distribution systems, including high voltage substations, transformers, switchgear, motors, motor control centers, lighting, grounding, electrical wiring, and hazardous area classification. * Lead and participate in electrical engineering activities that improve the reliability of Airgas assets and optimize maintenance costs * Responsible for the operations and maintenance support of electrical power distribution systems, including high voltage substations, transformers, switchgear, motors, motor control centers, lighting, grounding, electrical wiring, and hazardous area classification. * Manage/assist in analysis and ensure follow-up on predictive data (coordination studies, relay tests, thermography, PD testing, megger tests, oil gas analysis, etc.) * Provide technical guidance to operating plants from a corporate level on Local, National, & International Codes, Standards, Policies, and Procedures * Assist with engineering studies, incident investigations, audits and assists with preparing oral and written reports. * Establish and maintain equipment condition assessment information for high yards and high voltage motors * Provide technical assistance to field personnel in the areas of high voltage distribution equipment and high voltage motors * Provide engineering assistance to other departments and perform any additional responsibilities as requested or assigned. * Provide technical input to assist in development of project planning. * As Operations Representative, participate in the acceptance and operations phases of new Projects. * Implement Smart Innovative Operations (SIO) Predict initiatives for electrical equipment at Airgas. * Provides technical oversight and review of project engineering work performed by external resources in support of the development and implementation of small electrical projects. * Actively participate in Root Cause Analyses (RCA) * Take the lead in training, coaching, and mentoring field technicians and operations staff in the preventative maintenance and operation of electrical distribution and control systems. ________________________ Are you a MATCH? Required Qualifications * Understanding of medium/high voltage motors and distribution systems; at least 7,000 Voltage * Working knowledge of electrical codes and standards such as IEC, ISA, NEC, IEEE, etc. * Experience in the use of Microsoft Office applications and Google Suite of tools * Ability to travel for extended periods of time (1 to 10 days), with little advance warning. * Valid driver's license required Preferred Qualifications * Bachelor of Science degree in Electrical Engineering * 2 years of Electrical Engineering experience * 2 years of Medium Voltage experience * 5 years of Industrial Operations experience ________________________ Benefits We care about and support all Airgas associates. This is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, vacation, sick time, floating holidays, and paid holidays for full-time employees. We provide a progressive parental leave package for our eligible Airgas parents, offering generous paid time off for the birth or placement of children. Additionally, we offer our employees a 401k plan with company matching funds, tuition reimbursement, discounted college tuition for employees' dependents, and an Airgas Scholarship Program. _________________________ Your DIFFERENCES enhance our PERFORMANCE At Airgas, we are committed to building a workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. _________________________ About Airgas Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals. Through the passion and diversity of its 18,000 associates, Airgas fosters a culture of safety, customer success, sustainability and innovation. Airgas associates are empowered to share ideas, take initiative and make decisions. Airgas is a subsidiary of Air Liquide, a world leader in gases, technologies and services for industry and healthcare. Present in 60 countries with approximately 66,500 employees, Air Liquide serves more than 4 million customers and patients. Join us for a stimulating experience: At Airgas, you matter and so does the work you do. As a member of our team, you play an important role in the success of your team, making sure our products are created sustainably and delivered safely and efficiently. In turn, you'll find a welcoming workplace where you're valued for who you are and where you can fill your potential while growing a fulfilling career - whatever path you choose. _________________________ Equal Employment Opportunity Information We are an equal opportunity employer. We welcome all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. Airgas, an Air Liquide Company is a Government contractor subject to the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Section 503 of the Rehabilitation Act of 1973. Airgas does not discriminate against qualified applicants with disabilities, and is committed to providing reasonable accommodations to the known disabilities of such individuals so as to ensure equal access to benefits and privileges of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact us by email at us-accommodationrequest@airgas.com. _________________________ California Privacy Notice

Meta is hiring ASIC Formal Verification Engineer within the Infrastructure organization. We are looking for individuals with experience in Formal Verification to build IP and System On Chip (SoC) for data center applications. As a Formal Verification Engineer, you will be part of a team working with the best in the industry, focused on developing innovative ASIC solutions for Meta's data center applications. You will be developing comprehensive formal testplans and be responsible for complete formal verification sign-off of single or multiple complex blocks. The role also provides ample opportunities to partner and collaborate with full stack software, hardware, ASIC Design, Emulation and Post-Silicon teams towards creating a first-pass silicon success. **Required Skills:** ASIC Engineer, Formal Verification Responsibilities: 1. Provide technical leadership in Formal Verification 2. Propose, implement and evangelize the Formal Verification Methodology to be used across the group, both at the top level and at the block level 3. Work with Architecture and Design team to come up with formal specification and implementation 4. Define formal verification scope, create formal environment and close coverage with targeted Formal Verification Techniques at IP, Subsystem and SoC level 5. Build reusable/scalable environments for Formal Verification and deploying the tools 6. Evaluate and recommend EDA solutions for Formal Verification 7. Provide training for internal teams and mentoring engineers related to Formal Verification Technology **Minimum Qualifications:** Minimum Qualifications: 8. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience 9. 8+ years of experience in Design Verification 10. 5+ years of experience in Formal Verification 11. Experience with Formal Verification applications including Datapath, sequential equivalence, Xprop, Clock Gating, connectivity etc 12. Proven understanding of Formal Verification methodologies, complexity reduction techniques and abstraction techniques 13. Proven analytical skills to craft novel solutions to tackle industry-level complex designs 14. Demonstrated experience with effective collaboration with cross functional teams 15. Fluency in hardware description languages, such as SystemVerilog and SVA 16. Proficiency in scripting languages such as Python, Perl, or Tcl 17. Experience with JasperGold or VC-Formal **Preferred Qualifications:** Preferred Qualifications: 18. Experience to quickly understand and interpret specifications and extract design behaviors/properties 19. Experience in formal property verification of complex compute blocks such as DSP, CPU, GPU or HW accelerators 20. Experience with complex SoCs 21. Formal verification experience in clock domain crossing, IP-XACT based register verification and low power 22. Experience with development of fully automated flows from specification to fully verified designs 23. Experience with simulators and waveform debugging tools **Public Compensation:** $178,000/year to $250,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Electrical Engineer - Energy and Power These openings provide the opportunity to engage with our clients, evaluate their energy needs, develop concept-level plans and solutions, then take these through detailed design to provide for full execution of the solution. We offer and deliver a true "end to end" life-cycle service from exploration, development, operation, and repowering/retirement. Demonstrated abilities include a basic understanding of electrical engineering sciences. Prior experience in consulting and design will be highly regarded. Your primary responsibilities will focus upon providing feasibility studies, construction documents and construction oversight for energy projects. You'll be expected to possess strong communication and problem-solving skills. Successful candidates will have a strong grasp of engineering fundamentals and the confidence to explore innovative solutions. If you are passionate about developing reliable and sustainable energy projects, motivated by a challenge, and enjoy working with a dynamic, multi-disciplinary team to develop innovative solutions, Jacobs is the place for you. Come join our growing team to realize the future of energy! #epjobs #naepjobs #Xcel #LI-TD1 · Bachelor's or Advanced Degree in Electrical Engineering, Electrical Power Engineering or related engineering discipline · At least 4 years of design/consulting experience · Demonstrated ability for developing design calculations, construction drawings and specifications. · Strong communication and technical writing skills · Ability to work independently with minor supervision once given guidance by lead engineer Other highly regarded qualifications include Professional Registration as well as experience with: · 3D modeling software such as Revit, AutoCAD, CADWorx and NavisWorks · Power system modeling experience using SKM Power Tools, ETAP or similar modeling software · Power distribution systems and microgrids · Power generation projects exceeding 10MW capacity · HV or MV Substations · Renewable energy projects including wind, solar, hydro, geothermal and other technologies · Energy storage systems · Protection and Control, SCADA or power system automation · Campus utility master planning or decarbonization/climate response planning · Cogeneration or combined heat and power systems · Thermal utility plants and distribution systems (steam, hot water, chilled water) Professional Engineer (PE) OR the ability to obtain Professional Engineer (PE) within 1 year, preferred Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Job Description PPS is seeking an experienced Professional Electrical Engineer Manager for our aluminum extrusion and finishing facility near Eugene. The Manager oversees electrical engineering projects, supervising a team of engineers and electricians, managing project timelines and budgets, and ensuring technical and safety compliance. This is a Direct Hire role with a highly competitive pay rate, fantastic benefits, and working in a new facility! Responsibilities: Lead and manage a team of electrical engineers in the design, development, and testing of electrical systems. Oversee project timelines, budgets, and resource allocation to ensure timely and cost-effective project completion. Develop and implement electrical engineering standards, protocols, and procedures. Coordinate with other departments and stakeholders to align project goals and objectives. Ensure compliance with industry standards, local regulations, and safety requirements. Provide technical guidance and mentorship to engineering team members. Review and approve technical documentation, drawings, and specifications. Conduct performance evaluations and support the professional growth of team members. Identify and resolve technical issues and challenges in a timely manner. Stay updated with the latest advancements in electrical engineering and relevant technologies. Requirements: Bachelor's or Master's degree in Electrical Engineering or related field. Professional Engineer (PE) license. Experience with project management tools and software. Knowledge of advanced electrical design software and tools. Familiarity with industry standards such as IEEE, NEC, and IEC. Strong background in renewable energy systems or industrial automation. Minimum of 5-7 years of experience in electrical engineering. Proven experience in a leadership or management role. Strong project management skills and the ability to manage multiple projects simultaneously. Excellent communication and interpersonal skills. In-depth knowledge of electrical systems, components, and design principles. Proficiency in electrical engineering software and tools. Analytical and problem-solving abilities. Experience with budgeting and financial management.

PPS is seeking an experienced Professional Electrical Engineer Manager for our aluminum extrusion and finishing facility near Eugene. The Manager oversees electrical engineering projects, supervising a team of engineers and electricians, managing project timelines and budgets, and ensuring technical and safety compliance. This is a Direct Hire role with a highly competitive pay rate, fantastic benefits, and working in a new facility! Responsibilities: Lead and manage a team of electrical engineers in the design, development, and testing of electrical systems. Oversee project timelines, budgets, and resource allocation to ensure timely and cost-effective project completion. Develop and implement electrical engineering standards, protocols, and procedures. Coordinate with other departments and stakeholders to align project goals and objectives. Ensure compliance with industry standards, local regulations, and safety requirements. Provide technical guidance and mentorship to engineering team members. Review and approve technical documentation, drawings, and specifications. Conduct performance evaluations and support the professional growth of team members. Identify and resolve technical issues and challenges in a timely manner. Stay updated with the latest advancements in electrical engineering and relevant technologies. Requirements: Bachelor's or Master's degree in Electrical Engineering or related field. Professional Engineer (PE) license. Experience with project management tools and software. Knowledge of advanced electrical design software and tools. Familiarity with industry standards such as IEEE, NEC, and IEC. Strong background in renewable energy systems or industrial automation. Minimum of 5-7 years of experience in electrical engineering. Proven experience in a leadership or management role. Strong project management skills and the ability to manage multiple projects simultaneously. Excellent communication and interpersonal skills. In-depth knowledge of electrical systems, components, and design principles. Proficiency in electrical engineering software and tools. Analytical and problem-solving abilities. Experience with budgeting and financial management.

We are seeking a highly skilled and hands-on Controls Engineer to support both immediate staffing needs and long-term growth in our engineering team. This role is ideal for someone who thrives in a dynamic, industrial environment and enjoys a balance of fieldwork and office-based engineering tasks. You'll be part of a collaborative team responsible for designing, troubleshooting, and supporting complex automation systems used in heavy industrial applications. Responsibilities * Work directly with customers to identify problems, interpret schematics, and implement solutions. * Modify and troubleshoot PLC code (primarily Siemens and other platforms). * Develop and modify electrical schematics and wiring diagrams using AutoCAD. * Collaborate with the electrical shop to build and test control panels and systems. * Assist in the design and integration of automation systems for large industrial equipment. * Work closely with cross-functional teams including mechanical engineers, project managers, and field technicians. * Communicate effectively with customers and internal stakeholders to ensure project success. * Provide technical support and documentation for ongoing and completed projects. Essential Skills * Strong understanding of industrial automation and control systems. * Experience with PLCs (Siemens, Omron preferred) for troubleshooting and code modification. * Proficiency in AutoCAD, especially for electrical schematics and point-to-point wiring diagrams. * Ability to read and interpret complex electrical drawings and identify potential issues. * Comfortable working in industrial environments. * Willingness to travel domestically for field service and commissioning work. * Excellent problem-solving and critical thinking abilities. * Strong interpersonal skills; able to work well with customers and team members. * Self-motivated and adaptable to changing priorities. Additional Skills & Qualifications * Experience in industries such as municipal waste, recycling, food processing, or other heavy industrial sectors. * Experience working with large equipment and automation systems. * Degree in Electrical Engineering or related field is a plus, but not required. Job Type & Location This is a Contract to Hire position based out of Wilsonville, OR. Pay and Benefits The pay range for this position is $35.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Wilsonville,OR. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Join the Team at Electric Lettuce [LOCATION]: Become Our Next Full-Time Lead Budtender! Are you ready to elevate your career to new highs? Electric Lettuce, voted Best Dispensary In Portland in 2022 & 2023, is on the hunt for its next Full-Time Lead Budtender. If you have a love for the cannabis industry, a knack for customer service, and a desire to work in a vibrant, fast-paced environment, this is the opportunity for you! Who We Are: Electric Lettuce isn't just a dispensary. We believe in good vibes, great weed, and a welcoming atmosphere where our customers can relax, learn, and enjoy. Our mission is to provide top-notch cannabis products and unparalleled service, all while fostering a community that celebrates creativity, inclusivity, and fun. What you'll do Deliver exceptional customer service while seeking to connect with a diverse spectrum of clients and customers, and coach others to do the same Educate customers about our cannabis products and assist with product selection Process POS transactions with efficiency and accuracy Maintain a clean and professional environment for customers Curate and display product thoughtfully to maximize sales Support management with dispensary tasks as needed What we look for Individuals with a passion for the cannabis industry Previous retail and customer service experience is , cannabis experience is a plus People leadership and supervisory experience Must be 21 years of age or older Ability to adhere to all OLCC and company rules and regulations Hold, or be willing to obtain, a valid Marijuana Handler's Permit Ability to stand, walk, sit, and kneel daily in retail and production environments that include concrete or other hard-surface floors Ability to push, pull and carry up to 30 pounds multiple times daily What We Offer: Monthly Store Bonus Program Incremental wage increases every 6 months for the first 2 years Tips Generous employee discounts and complimentary industry samples Medical, Dental, and Vision Insurance Employee Assistance Program Complimentary life insurance Paid Time Off and Holidays How to Apply: If you're ready to light up your career with Electric Lettuce, Click APPLY now! EEO Statement Groundworks Industries and our family of brands are proud to be an equal opportunity employer and prohibit discrimination and harassment of any kind. All employment decisions are rooted in business needs, role requirements, and individual qualifications, without regard to race, color, religion, national origin, ancestry, citizenship status, age, mental or physical disability, sex, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other characteristic protected by applicable federal, state, or local laws. If you need any assistance or accommodation in the application and interview process, please reach out to us at ************* or ************, it would be our pleasure to partner with you.

**About the Role:** We are looking for a talented, curious, and highly motivated Staff Conversational AI Designer to join our Voice & Sound team. The ideal candidate will breathe design and have deep expertise in Voice and Multimodal interfaces. You will join a team of experts working on end-to-end multimodal customer experiences, driving innovation in the rapidly evolving and expanding high-tech world of AI through user-centric practices and design. In this role, you will lead with vision and collaborate with other designers, researchers, technologists, and product stakeholders to craft effective and exceptional experiences through data-driven design. **Responsibilities:** + Lead design vision and execution for AI-based conversational and multimodal experiences, advocating usability and user-centered design principles. + Develop and promote conversation design best practice standards, reusable interactional patterns, and processes. + Deliver effective design documentation to communicate experience requirements, design principles, best practices, prototypes, and multimodal flows to convey voice forward interactions that leverage AI. + Identify opportunities for usability testing and research efforts by leading and supporting the creation of prototypes, participating in clinic sessions, analyzing, brainstorming, ideating etc. + Build strong relationships with internal stakeholders to understand priorities, collaborate on actions to implement product and service solutions, and ensure a connected end-to-end user experience. + Identify, track, and monitor industry/experience trends and drivers of customer needs and satisfaction. + Lead visualization of experiences using storyboards, customer journeys, user flows, low-fidelity wireframes and voice prototypes to illustrate vision and influence impactful experiences in AI + Balance user needs, technical constraints, and product objectives to solve problems effectively, crafting world-class multimodal user experiences. **Requirements:** + 9 + years creating conversational design experiences. + Ability to combine vision with strong creative design execution. + Strong portfolio with work samples showcasing expertise, craft, aesthetics, and depth of thought. + Experience designing for Generative or Agentive AI-powered experiences + Understanding of machine learning & natural language processing (NLP) fundamentals. + Experience incorporating research into the design process. + Subjet-matter expert. Ability to work independently, be organized, self-motivated, and have attention to detail. + Excellent written, visual, and verbal communication skills. + Proficient in common design tools (e.g.Figma, VoiceFlow, ProtoPie, etc). + Demonstrated experience documenting for **voice-only, voice-forward, and multi-modal** experiences + **Demonstrated experience** **creating interactive** prototypes formultimodal experiences (voice, sound, visuals, touch, chat, etc) **Preferred** **Qualifications:** + Deep understanding of Generative AI for Conversational Experiences, foundational elements of Conversation Design, and LLMs. + Ability to communicate technical concepts to a non-technical audience (verbal and written). + Ability to work effectively within an environment that leverages robust design systems and libraries, while seeking to delight and impress users with innovative concepts and experiences. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Title: Electrical Technician I Job Type: Full-Time About Us At Marathon Coach, Inc., it is our people who make the difference. Our team works together to turn a Prevost bus chassis into a one-of-a-kind luxury motorcoach. As part of our team, you will work alongside experienced craftspeople, in a friendly hands-on environment. We have our Manufacturing, Service and Sales team in Coburg, Oregon, with Service and Sales locations in Florida and Texas. Marathon is a thriving manufacturing company, currently experiencing growth. As a result, we are expanding our team and looking for skilled and motivated individuals. We are looking for a dependable safety-conscious Electrical Technician to join our team. An electrician's license is not required, but practical experience or a strong mechanical aptitude is preferred. What We Offer Health, dental, vision insurance Short Term Disability Life Insurance 401-K with employer match Paid Vacation Paid Sick Leave 7 Paid Holiday's per year Employee Referral Bonus Program On site Human Resources support What You Will Do -Perform installation, troubleshooting and maintenance of various electrical systems -Install and route all wire harnesses -Read basic wiring diagrams and schematics -Run wiring and make wire connections -Work with 12V / 24V battery systems -Work closely with our Engineering and Production team -Follow safety protocols -All other duties as assigned What's Your Shift This opportunity is Monday - Friday and has two shifts: -7:00 a.m. - 3:45 p.m. -6:00 a.m. - 2:45 p.m. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands or fingers to touch, handle, or feel; reach with hands and arms. The employee frequently is required to stand and walk. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, occasionally lift and/or move up to 50 pounds, and occasionally lift/or move up to 100 pounds with assistance. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. Work Environment While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. Exposure to a production environment which includes noise, moving machinery and forklifts. Personal Protective Equipment is provided. Marathon Coach, Inc. is an equal opportunity employer. Wage: $17.00 - $19.00 per hour

***************** is planning to bring a million developers and a billion users onchain. We need your help to make that happen. We believe that the onchain platform is the most important builder platform since the internet ("online"). We believe that the onchain platform should be open source, free to use, and globally available. And we believe that in order to make it really work, we need all hands on deck, working together to scale in a secure, decentralized, easy-to-use way. Base is incubated within Coinbase and plans to progressively decentralize in the years ahead. We believe that decentralization is critical to creating an open, global crypto economy that is accessible to everyone. Base is built on Optimism's open-source OP Stack. We're joining as the second Core Dev team working on the OP Stack to ensure it's a public good available to everyone; and contributing a portion of sequencer revenue to funding public goods. We are looking for a strong *Smart Contract Engineer* to join the Base team to help us continue scaling in order to pave the way for billions of people coming onchain. *What you'll do*: * Architect and build secure smart contract protocols and backend services to connect Coinbase users with the crypto ecosystem * Drive standardization in crypto protocols by designing and defining interfaces * Work closely with the Base leadership and product team to set our onchain strategy and roadmaps * Mentor and train other team members on smart contract engineering best practices *What we look for in you*: * 2+ year Experience with Solidity and smart contract development * 3+ year Experience with backend/client side development * Deep understanding of smart contract best practices and current industry patterns * Extensive experience with crypto (Ethereum, DeFi etc.) * Interest and passion for contributing to the crypto ecosystem * Interest and passion for building secure, robust, scalable infrastructure *Nice to haves*: * Experience with Go * Experience with zero-knowledge technology * Contributions to open source crypto projects * Crypto-forward experience, including familiarity with onchain activity such as interacting with Ethereum addresses, using ENS, and engaging with dApps or blockchain-based services. Job #: GBSCE05US *Answers to crypto-related questions may be used to evaluate your onchain experience *Pay Transparency Notice:* Depending on your work location, the target annual salary for this position can range as detailed below. Full time offers from Coinbase also include bonus eligibility**+ benefits (including medical, dental, vision and 401(k)). Pay Range: $186,065-$218,900 USD Please be advised that each candidate may submit a maximum of four applications within any 30-day period. We encourage you to carefully evaluate how your skills and interests align with Coinbase's roles before applying. Commitment to Equal Opportunity Coinbase is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, gender, national origin, age, disability, veteran status, sex, gender expression or identity, sexual orientation or any other basis protected by applicable law. Coinbase will also consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state and local law. For US applicants, you may view the *********************************************** in certain locations, as required by law. Coinbase is also committed to providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact us at accommodations*********************************** Global Data Privacy Notice for Job Candidates and Applicants Depending on your location, the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA) may regulate the way we manage the data of job applicants. Our full notice outlining how data will be processed as part of the application procedure for applicable locations is available **************************************************************** AI Disclosure For select roles, Coinbase is piloting an AI tool based on machine learning technologies to conduct initial screening interviews to qualified applicants. The tool simulates realistic interview scenarios and engages in dynamic conversation. A human recruiter will review your interview responses, provided in the form of a voice recording and/or transcript, to assess them against the qualifications and characteristics outlined in the job description. For select roles, Coinbase is also piloting an AI interview intelligence platform to transcribe and summarize interview notes, allowing our interviewers to fully focus on you as the candidate. *The above pilots are for testing purposes and Coinbase will not use AI to make decisions impacting employment*. To request a reasonable accommodation due to disability, please contact accommodations[at]coinbase.com.

Job Description Absco Solutions is the premier facility vulnerability expert in fire life-safety, security and technology field with offices in Everett, Lynnwood and Spokane, Washington and Wilsonville, Oregon. We specialize in fire alarm, access control, intrusion, and video surveillance and we're looking for licensed Journeyman LEA Electricians and trainees with experience pursuing long-term careers! We have an exceptional, experienced team to assist you in mastering your skills, with great growth opportunity. We are currently seeking LEA Electrician's to join our Fife, WA operations team! Key activities include but not limited to: Security, camera, fire alarm and access control installation, integration, networking, programming, service and inspections principally in the field Interpret blueprints, diagrams, submittal documents, specifications and schematics On-call service rotation Communicate with customers, contractors and support staff to ensure effective job implementation and completion. Provide guidance and field training to apprentice technicians. Troubleshoot systems and ground faults, split circuits, and other work as needed Ability to lead crews of other installers Qualifications and Skills Oregon Limited Energy Specialty License (Limited Energy Class A - LEA) Valid state Driver's License Clear driving record and ability to be covered by company auto insurance Strong verbal and written communication Ability to pass a background check NICET Fire Alarm certification preferred Team player and dependable Compensation $38-48 per hour DOE, skill-sets, certifications, etc. Benefits and Perks Relocation assistance may be available for qualified candidates Paid-time-off plan / Holiday pay / Short & Long term disability Medical/Dental/Vision benefits Simple IRA retirement savings plan Company provided NICET, L&I, CEU, & factory training Company provided vehicle, laptop, and tools Quarterly team activities Professional development plans Absco Solutions is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, disability status, protected veteran status, marital status or any other characteristic protected by law. Powered by JazzHR VuLiMSxlOd

Job Description Agility Robotics is a pioneer. Our robot, Digit, is the first to be sold into workplaces across the globe. Our team is differentiated by its expertise in imagining, engineering, and delivering robots with advanced mobility, dexterity, intelligence, and efficiency -- robots specifically designed to work alongside people, in spaces built for people. Every day, we break through engineering challenges and invent new solutions and capabilities that will one day make robots commonplace and approachable. This work is our passion and our responsibility: our mission is to make businesses more productive and people's lives more fulfilling. About The Role This role will influence the design of the next generation of Digit, aimed at meeting customer needs at a commercial scale. The Senior Engineer will help drive the robot design and will develop robust and reliable electronics for this robot generation. Collaboration with a multi-discipline team of engineers is essential to understand product requirements and ensure designs are robust and production-ready. Location This position offers flexibility, with the option to be based within commuting distance of our Salem, OR headquarters or remotely in the San Francisco Bay Area. Remote candidates should anticipate regular travel to Salem, typically one week per month. About The Work The Senior Electrical Engineer's responsibilities include: Implementing major subsystem designs. Participating in cross-functional design reviews. Executing rapid prototyping and bring-up of electrical systems at the board level. Ensuring that design for test, manufacturing, and assembly test capabilities are implemented. Participating in debugging efforts and root cause analysis for hardware and software defects. Managing through ambiguity. About You Candidates should possess the following qualifications: A Bachelor's or Master's degree in Electrical Engineering (or equivalent). 7 or more years of electrical design experience Deep experience with Altium for schematic entry and PCB layout Experience with motors and motor control, particularly BLDC motors Experience in embedded controls, high-speed differential signaling, microcontrollers, memory buses, digital design, and power electronics Preferred to have: Candidates with the following will be highly regarded: An advanced degree with robotics experience A strong understanding of structured product development (including requirements-driven engineering, comprehensive documentation, and rigorous verification) Experience with engineering verification test development and execution Full-time Employees are eligible for Benefits: 401(k) Plan: Includes a 6% company match. Equity: Company stock options. Insurance Coverage: 100% company-paid medical, dental, vision, and short/long-term disability insurance for employees. Benefit Start Date: Eligible for benefits on your first day of employment. Well-Being Support: Employee Assistance Program (EAP). Time Off: Exempt Employees: Flexible, unlimited PTO and 10 company holidays, including a winter shutdown. Non-Exempt Employees: 10 vacation days, paid sick leave, and 10 company holidays, including a winter shutdown, annually. On-Site Perks: Catered lunches four times a week and a variety of healthy snacks and refreshments at our Salem and Pittsburgh locations. Parental Leave: Generous paid parental leave programs. Work Environment: A culture that supports flexible work arrangements. Growth Opportunities: Professional development and tuition reimbursement programs. Relocation Assistance: Provided for eligible roles. All of our roles are U.S.-based. Applicants must have current authorization to work in the United States. Agility Robotics is committed to a work environment in which all individuals are treated with respect and dignity. Each individual has the right to work in a professional atmosphere that promotes equal employment opportunities and prohibits unlawful discriminatory practices, including harassment. Therefore, it is the policy of Agility Robotics to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Agility Robotics prohibits any such discrimination or harassment. Agility Robotics does not accept unsolicited referrals from third-party recruiting agencies. We prioritize direct applicants and encourage all qualified candidates to apply directly through our careers page. If you are represented by a third party, your application may not be considered. To ensure full consideration, please apply directly. Apply Now: ***************************

The Controls and Automation Engineer reports to the Facilities Manager and is responsible for maintaining and improving the functionality and performance of mission critical automation and control systems in an industrial environment. The position will work with Maintenance, Production, Quality, Information Technologies, and Process Engineering departments to accomplish goals related to automation, process, and quality improvements, cost reduction, and equipment obsolescence and integration. Essential Functions: * Design, implement, and integrate controls and automation systems * Analyze and troubleshoot equipment and process problems using control systems, SCADA, data archive, and analysis tools * Lead, execute, and be accountable for large projects with limited supervision * Design and administer automation system training packages * Migrate obsolete and control systems to robust modern systems * Implement controls and automation solutions to improve equipment reliability * Prepare specification for purchase of material, components, systems, services, and equipment * Create and modify controls schematics, single line diagrams, instrument loop drawings, and control system flow diagrams * Oversee, direct and supervise contractors and consultants during construction, modification, and installation of plant equipment, facilities, and systems * Lead/participate in problem-solving activities; engineer and implement solutions * Analyze process data and support continuous improvement efforts * Support operations to optimize process performance * Manage special projects as directed Knowledge, Skills and Abilities typically required to perform the essential functions of this job: Knowledge of: * Industrial control systems architecture and configuration * Programmable Automation Controllers * Human Machine Interfaces * High speed / multi-axis motion control * Supervisory Control and Data Acquisition * Capital funding and accounting practices Skilled in: * Advanced computer and software skills * Project management * Proficiency of Microsoft Office Suite programs * Communicating and interacting professionally with all levels of staff * Reading and interpreting schematics/blueprints Ability to: * Work independently and within a team * Plan and monitor multiple projects simultaneously * Read and understand technical manuals, schematics, and technical drawings * Apply safe work practices in an industrial environment Education, Certifications and Experience: * Bachelor's Degree in Electrical or Electronics Engineering with exposure to Automation, Programming, or control systems theory or equivalent experience * At least 5 years of experience in a manufacturing environment Working Conditions under which the essential function of this job are typically performed: * Majority of job duties performed in a typical office setting * Frequent trips into Industrial manufacturing environment. * Exposure to noise, vibration, heat/cold, and industrial mobile equipment. * Occasional local travel to vendor sites. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a full time position

At A-dec, we do more than create the highest quality products and services for the dental industry; we strive to deliver a superior employment experience for each of our team members. With an environment that encourages and assists each person in developing to their highest potential, a career at A-dec is incredibly rewarding. OverviewThe Principal Electrical Engineer is the primary hands-on technical authority in electrical engineering and is responsible for establishing the electrical system architecture, setting the direction in product development, and spearheading the development of the next generation of products and the improvement/maintenance of current designs, with minimal administrative duties. Represents the company's position on dental industry issues and new product introductions and is a technical “face” of A-dec. JOB DUTIES AND RESPONSIBILITIES: Partners with Project Chiefs, Product Management, Engineering Management, and Technology Research to develop architecture and platforms for current and future generations of products. Leads new product design, sustaining engineering efforts, and ensures product complies with all technical regulatory requirements. Provides technical analysis and recommendations to strategic planning teams, serving as the champion for strategic system decisions. Participates in recruiting and training team members to build a talented engineering organization with a strong design presence while imparting knowledge through education of technical mentorship of less senior engineers. Using considerable independent judgment, assures technology is appropriate for the product, the product is designed to meet the needs of the customer, schedules are met, regulatory matters are properly addressed, resources are used efficiently, design activities are well coordinated, and technical conflicts associated with competing ideas and priorities are quickly resolved. Actively maintains design skills and knowledge of product technologies by staying current in manufacturing technologies, competitive technologies, ancillary equipment technologies, testing, the dental equipment industry, engineering trends, regulations and standards, patents, and project management. Assures self and subordinate staff participates in professional organizations and other networks to remain current with technological innovations. Mentors others and independently analyzes unusually complex problems to determine highly innovative and ingenious solutions, theories, and concepts. QUALIFICATIONS: Knowledge, Skills, and Abilities Mastery of designing electronics for real-world robustness and high reliability. Mastery of PCB design from concept through manufacturing transfer, including Design-For-Manufacturability analysis. Mastery of designing and testing to EMI/EMC standards such as FCC and CISPR. Comprehensive knowledge of electrical engineering principles and experience in complex problem solving. Comprehensive knowledge regarding design details of DC-DC converters, embedded microcontrollers, memory interfaces, sensors, and other technologies. In-depth knowledge of Altium Designer or similar PCB design software including areas of both schematic capture and PCB layout. Thorough knowledge of using electrical simulation software such as LTSpice. Thorough knowledge of CAN bus, Ethernet, and wireless network communication technologies. Thorough knowledge of designing systems with high-speed differential signals >1GHz. Thorough knowledge of designing for signal integrity of Analog Circuits. Working knowledge of mechanical CAD tools, such as AutoCAD and Autodesk Inventor. Ability to create/manage a vision and think strategically, plan and organize, innovate, analyze complex data and situations, and exercise sound judgment. Must be able to communicate that vision, motivate and lead employees, and collaborate with other teams. Ability to clearly assess, articulate, and manage risk with a sense of urgency to meet product requirements, on schedule, and on budget. Must be able to see the big picture, prepare contingency plans, and ensure execution of plans through effective organizational awareness. Ability to provide engineering solutions to a variety of problems. Skilled to apply and fully use design engineering principles, concepts, and techniques. A desire to stay active in technology development and architecture. Education and Experience Bachelor's degree in engineering or equivalent experience. Typically has greater than fifteen (15) years of relevant professional or technical engineering experience of increasing responsibility and difficulty of assignment. Experience designing regulated equipment. Ideally this experience is in a medical or similar safety-conscious, highly regulated industry. Physical Requirements: Ability to lift, carry, push, pull or otherwise maneuver up to 35 pounds with or without assistance on a routine basis. Must have manual hand dexterity to grasp, operate tools and equipment repetitively. Able to walk, stand, sit, bend, reach, and occasionally kneel, climb steps, and twist throughout an entire shift. Some areas may be exposed to chemicals, noise, vibration and /or dust, and require the use of appropriate Personal Protective Equipment (PPE); such as, but not limited to safety glasses, hearing protection, foot protection, etc. Disclaimer This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not to be construed as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. A-dec reserves the right to assign job duties and days and hours of work based on factors such as workload requirements, staffing levels, and customer demands. At A-dec, we value our people and show it by prioritizing an inclusive culture, total well-being, and opportunities for learning and career advancement. A background check and screen for the illegal use of drugs is required. A-dec is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. In addition, A-dec will not discriminate against applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another. *VEVRAA Federal Contractor” A-dec is interested in qualified candidates authorized to work in the United States for US-based positions. We are unable to sponsor or take over sponsorship of employment visas.

This is not a remote position. The positions are located in Albany, OR, Portland, OR, or Seattle, WA Concept Systems offers career advancement opportunities by challenging our engineers to expand their skillset and become leaders in robotics, vision, laser scanning, motion control, manufacturing intelligence, and more. In short, our mission is to team with our customers to achieve manufacturing excellence by delivering the right automation solutions. To do so we are committed to being on the leading edge of automation technologies and developing innovative solutions to apply those technologies. With the rapid advancement of automation technology, the learning and development never stops. Couple this with our broad industry approach, serving markets such as aerospace, food processing, recycling, metals, automotive, breweries, and wood products, the rich learning environment we provide should be clear. We are looking to add a Controls Engineer to our team who will be responsible for applying engineering principles and experience to develop various project designs. Additionally, this individual will exercise judgement and initiative to solve problems and make sound recommendations while building and maintaining customer relationships. Technical, industry, scope, trade, and innovation diversity is the opportunity awaiting you at Concept Systems. We are excited to hear from you and confident you will like what you see as you learn more about us! This is not a remote position. The positions are located in Albany, OR, Portland, OR, or Seattle, WA Concept Systems offers career advancement opportunities by challenging our engineers to expand their skillset and become leaders in robotics, vision, laser scanning, motion control, manufacturing intelligence, and more. In short, our mission is to team with our customers to achieve manufacturing excellence by delivering the right automation solutions. To do so we are committed to being on the leading edge of automation technologies and developing innovative solutions to apply those technologies. With the rapid advancement of automation technology, the learning and development never stops. Couple this with our broad industry approach, serving markets such as aerospace, food processing, recycling, metals, automotive, breweries, and wood products, the rich learning environment we provide should be clear. We are looking to add a Controls Engineer to our team who will be responsible for applying engineering principles and experience to develop various project designs. Additionally, this individual will exercise judgement and initiative to solve problems and make sound recommendations while building and maintaining customer relationships. Technical, industry, scope, trade, and innovation diversity is the opportunity awaiting you at Concept Systems. We are excited to hear from you and confident you will like what you see as you learn more about us! Essential Duties and Responsibilities 1. System Hardware and Layout Design 2. System and Software Development 3. Proposals and Sales Support 4. Training and Career Development Engineering Proposals and Sales Support Works with customers to understand problems and define a solution Estimate solution Develop a written proposal Prepare proposal estimates and complete technical research Provide technical content for sales meetings Marketing support System Hardware and Layout Design Hardware selection Develop engineering to design Design review Develop electrical schematics and interconnect diagrams Motional control system design and implementation Develop Bill of Materials System and Software Development Functional Description and Specification Programming System Testing and Acceptance Performance and validation testing Factory Acceptance Hardware testing and quality control Commissioning and Start-up System Commissioning System Start-up On Site Acceptance Operator/Customer Training Project Deliverables and Documentation Final As-built Drawings Software Operator and maintenance Manuals Complete and accurate project documentation Training and Career Development Technology based training Project Management Training Attends Lunch & Learns as available Active participant in Employee Success Plans and offered training related to Career Path development Customer Relations Customer committed mindset Maintain existing relationships Fast and courteous response to service and support issues Team Activity, Development and Other Understand and follow Concept Systems Project Methodology Complete onboarding training module and participate in continuous training Strong organization skills Problem solving ability Maintains punctual, regular and predictable attendance Works collaboratively in a team environment with a spirit of cooperation Displays excellent communication skills including presentation, persuasion, and negotiation skills required in working with customers and coworkers and including the ability ability to communicate effectively and remain calm and courteous under pressure Respectfully takes direction from manager Key Competencies Culture of Leadership Not only demonstrates actions associated with living the Concept Way but inspires others to do so as well through leading by example, communication and holding others equally accountable to these standards. Takes ownership for own success; speaks openly and sincerely, is a source of inspiration, develops and fosters relationships both internally and externally and strives to be innovative. Results Focused Focuses on desired outcomes and how best to achieve them. Gets the job done on time and within budget. Sets high standards for performance of self and others, assumes responsibility and accountability for successfully completing projects or tasks, and can be counted on to deliver consistent and high-quality results. Communicates Effectively Clearly conveys information and ideas, orally and in writing, both internally and with customers. Organizes and structures communication to be professional, positive and succinct. Demonstrates active listening and appropriate body language. Adaptive to Change Views change as necessary and positive; maintains effectiveness when experiencing major changes in work tasks or the work environment, adjusts effectively to work within new structures, processes, requirements, and can effectively cope with change internal to Concept Systems or externally. Culture of Innovation Demonstrates the desire to be innovative by taking a proactive and creative approach to projects. Presents new product ideas when possible, participates in R2D2, and contributes through Follow It or Fix It. Culture of Accountability Demonstrates making the choice to rise above individual circumstances and demonstrates the ownership necessary for achieving the desired results - to See It, Own It, Solve It and Do It. Culture of Respect Demonstrates respect for others and provides recognition and appreciation for individuals in every role within Concept Systems. Follow It or Fix It Actively contributes feedback in an effort to promote continuous improvement while following Concept Systems established and documented business processes. Education and/or Experience Bachelor's Degree (B.S.) in Mechatronics, Mechanical Engineering, Electrical Engineering, Computer Science or related field from an accredited four-year college or university required Proficiency with Office 365 is required Process Control in Food and Beverage industry preferred Dairy industry experience preferred System Integration experience preferred Certificates, Licenses, Registrations Travel to support project and sales required Valid, insurable Driver's License is required Valid Passport for occasional out of country travel preferred Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk to hear. The employee is frequently required to sit. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Project work in the shop and customer start-ups may require moderate physical demands. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and extreme heat (non-weather). The employee is occasionally exposed to wet or humid conditions (non-weather); work in high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold (non-weather) and vibration. The noise level in the work environment is usually moderate. The work environment may vary depending on start-up and customer site environments. Travel to customer sites is required for this position; 20-30% annually. Qualified applicants must be legally authorized for employment in the United States. Applicants cannot require employer sponsored work authorization now or in the future for employment in the United States. Concept Systems offers a full range of comprehensive benefits, including medical, dental, flexible spending, matching 401(k), generous paid time off programs, profit sharing, and company paid training - in addition to a professional and business casual environment. Concept Systems is an Equal Opportunity Employer Additional Information About Us Our career advancement program allows multiple paths for advancement, whether it is diversifying your technical skillset, building on an existing skillset, project management, and/or personnel management. Concept Systems is a growing, progressive company that is leading manufacturing through the automation age and beyond. Now is a great time to join our team! As a company founded by engineers, for engineers, we know the best candidates are likely wanting some more details, so here you go - in addition to our diverse technology and industry approach, Concept Systems handles projects ranging in size from large Greenfield facilities to small turnkey machine center upgrades. We offer full service to our Customers, where our Controls Group works hand in hand with our Mechanical and Service Groups to tackle all our customers' control system's needs. Need more? We have more - Concept Systems also takes a unique approach to Products. All of our Engineers are encouraged to participate in Product ideation and development. With all the cool technologies we are engaged with and the wide array of applications we are asked to take on, we regularly come across technology solutions that we can package as products and sell into other markets. This approach sparks innovation at Concept Systems, keeps our engineers engaged in a healthy stream of R&D activity, and solidified our financial business model. * Please no third party vendors Skills & Requirements Essential Duties and Responsibilities 1. System Hardware and Layout Design 2. System and Software Development 3. Proposals and Sales Support 4. Training and Career Development Engineering Proposals and Sales Support Works with customers to understand problems and define a solution Estimate solution Develop a written proposal Prepare proposal estimates and complete technical research Provide technical content for sales meetings Marketing support System Hardware and Layout Design Hardware selection Develop engineering to design Design review Develop electrical schematics and interconnect diagrams Motional control system design and implementation Develop Bill of Materials System and Software Development Functional Description and Specification Programming System Testing and Acceptance Performance and validation testing Factory Acceptance Hardware testing and quality control Commissioning and Start-up System Commissioning System Start-up On Site Acceptance Operator/Customer Training Project Deliverables and Documentation Final As-built Drawings Software Operator and maintenance Manuals Complete and accurate project documentation Training and Career Development Technology based training Project Management Training Attends Lunch & Learns as available Active participant in Employee Success Plans and offered training related to Career Path development Customer Relations Customer committed mindset Maintain existing relationships Fast and courteous response to service and support issues Team Activity, Development and Other Understand and follow Concept Systems Project Methodology Complete onboarding training module and participate in continuous training Strong organization skills Problem solving ability Maintains punctual, regular and predictable attendance Works collaboratively in a team environment with a spirit of cooperation Displays excellent communication skills including presentation, persuasion, and negotiation skills required in working with customers and coworkers and including the ability ability to communicate effectively and remain calm and courteous under pressure Respectfully takes direction from manager Key Competencies Culture of Leadership Not only demonstrates actions associated with living the Concept Way but inspires others to do so as well through leading by example, communication and holding others equally accountable to these standards. Takes ownership for own success; speaks openly and sincerely, is a source of inspiration, develops and fosters relationships both internally and externally and strives to be innovative. Results Focused Focuses on desired outcomes and how best to achieve them. Gets the job done on time and within budget. Sets high standards for performance of self and others, assumes responsibility and accountability for successfully completing projects or tasks, and can be counted on to deliver consistent and high-quality results. Communicates Effectively Clearly conveys information and ideas, orally and in writing, both internally and with customers. Organizes and structures communication to be professional, positive and succinct. Demonstrates active listening and appropriate body language. Adaptive to Change Views change as necessary and positive; maintains effectiveness when experiencing major changes in work tasks or the work environment, adjusts effectively to work within new structures, processes, requirements, and can effectively cope with change internal to Concept Systems or externally. Culture of Innovation Demonstrates the desire to be innovative by taking a proactive and creative approach to projects. Presents new product ideas when possible, participates in R2D2, and contributes through Follow It or Fix It. Culture of Accountability Demonstrates making the choice to rise above individual circumstances and demonstrates the ownership necessary for achieving the desired results - to See It, Own It, Solve It and Do It. Culture of Respect Demonstrates respect for others and provides recognition and appreciation for individuals in every role within Concept Systems. Follow It or Fix It Actively contributes feedback in an effort to promote continuous improvement while following Concept Systems established and documented business processes. Education and/or Experience Bachelor's Degree (B.S.) in Mechatronics, Mechanical Engineering, Electrical Engineering, Computer Science or related field from an accredited four-year college or university required Proficiency with Office 365 is required Process Control in Food and Beverage industry preferred Dairy industry experience preferred System Integration experience preferred Certificates, Licenses, Registrations Travel to support project and sales required Valid, insurable Driver's License is required Valid Passport for occasional out of country travel preferred Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk to hear. The employee is frequently required to sit. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. Project work in the shop and customer start-ups may require moderate physical demands. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and extreme heat (non-weather). The employee is occasionally exposed to wet or humid conditions (non-weather); work in high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold (non-weather) and vibration. The noise level in the work environment is usually moderate. The work environment may vary depending on start-up and customer site environments. Travel to customer sites is required for this position; 20-30% annually. Qualified applicants must be legally authorized for employment in the United States. Applicants cannot require employer sponsored work authorization now or in the future for employment in the United States. Concept Systems offers a full range of comprehensive benefits, including medical, dental, flexible spending, matching 401(k), generous paid time off programs, profit sharing, and company paid training - in addition to a professional and business casual environment. Concept Systems is an Equal Opportunity Employer Additional Information About Us Our career advancement program allows multiple paths for advancement, whether it is diversifying your technical skillset, building on an existing skillset, project management, and/or personnel management. Concept Systems is a growing, progressive company that is leading manufacturing through the automation age and beyond. Now is a great time to join our team! As a company founded by engineers, for engineers, we know the best candidates are likely wanting some more details, so here you go - in addition to our diverse technology and industry approach, Concept Systems handles projects ranging in size from large Greenfield facilities to small turnkey machine center upgrades. We offer full service to our Customers, where our Controls Group works hand in hand with our Mechanical and Service Groups to tackle all our customers' control system's needs. Need more? We have more - Concept Systems also takes a unique approach to Products. All of our Engineers are encouraged to participate in Product ideation and development. With all the cool technologies we are engaged with and the wide array of applications we are asked to take on, we regularly come across technology solutions that we can package as products and sell into other markets. This approach sparks innovation at Concept Systems, keeps our engineers engaged in a healthy stream of R&D activity, and solidified our financial business model. * Please no third party vendors

Welcome to Verdantas, where innovation meets sustainability, and your career finds purpose! At Verdantas, we're redefining environmental consulting and sustainable engineering through our use of cutting-edge modeling and digital technology and our genuine commitment to people. Our work spans high-growth sectors like water resources, resilient land use, energy transformation, and civil infrastructure. Our commitment to excellence, across more than 90 offices, is championed by a team of over 2,000 experts, scientists, engineers, geologists, and technical specialists, embedded in a people-focused culture, prioritizing the well-being of our employees, clients, and the communities we serve. We partner with clients to deliver smart, data-driven solutions to complex environmental and infrastructure challenges. We don't just solve problems; we help shape a more sustainable future. Join a people-first culture that values your well-being, empowers your growth, and amplifies your impact. At Verdantas, your career goes beyond the expected, and your work helps build a better world. Ready to shape the future of resilient communities? What You'll Do: Working as a part of a project team from concept through construction Building lasting relationships with clients and coworkers Contribute to community growth, development, and improvement Expanding personal knowledge and skills as you work on a wide range of projects Collect and help interpret data through research, file reviews, field observations and measurements, field testing and other methods Assist in preparing detailed plans and technical specifications Perform computations and process data using computer software or other established methods Assist in preparing cost estimates for design implementation Perform other engineering related tasks for projects (i.e. designs, drawing, site inspections etc.) under the supervision of senior engineers What You'll Bring: Experience in civil engineering a plus but not required EIT registration and the ability to work towards obtaining your Professional Engineering (PE) license Bachelor of Science in civil, mechanical, geotechnical, electrical, environmental, or another relevant engineering discipline An interest in helping with the planning and designing of projects related to water, wastewater, storm water, and/or transportation infrastructure Experience with Microsoft Office products, AutoCAD Civil 3D, and modeling software a plus but not required Salary Range: 68,000.00 - 72,000.00 Benefits: Flexible Work Environment Paid Parental Leave Medical Dental Vision Life and AD&D Insurance Short-Term and Long-Term Disability 401(k) with Company Match Paid Time Off + Holidays Verdantas strives to develop new ways to increase diversity awareness within our organization. We recruit and reward our employees based on capability and performance - regardless of race, gender, sexual orientation, gender identity or expression, lifestyle, age, educational background, national origin, religion, or physical ability. For us, it is imperative to build balanced teams from all walks of life and we believe that a diverse workforce is a stronger workforce. Verdantas is an EOE race/color/religion/sex/sexual orientation/gender identity/national origin/disability/vet

**Project Engineer - Packaging Solutions North America (PSNA) Engineering** ** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **Job Identification** 1082326