Electrical engineer jobs in Collierville, TN - 97 jobs

Your Opportunity a Lead Controls Engineer - TSO The Lead Controls Engineer will lead and support automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include setting and maintaining engineering standards, engaging vendors to drive innovation, and providing corporate technical support. While collaborating closely with plant leadership, engineering, and operations teams, this role focuses on accelerating automation and technology through smaller, less complex projects that deliver impactful improvements. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: Approximately 30% Travel to other sites 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: Projects: Support, lead, or manage smaller automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: Bachelor's degree in engineering or 15+ years of equivalent plant experience 5+ years in controls/automation 3+ years in manufacturing Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) Mechanical/electrical experience in food manufacturing Ability to collaborate across departments and sites Remote management capability Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: Regularly required to talk and hear. Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. Able to lift objects up to 50 pounds frequently. May push and pull heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA

Your Opportunity a Lead Controls Engineer - TSO The Lead Controls Engineer will lead and support automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include setting and maintaining engineering standards, engaging vendors to drive innovation, and providing corporate technical support. While collaborating closely with plant leadership, engineering, and operations teams, this role focuses on accelerating automation and technology through smaller, less complex projects that deliver impactful improvements. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: * Approximately 30% Travel to other sites * 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: * Projects: Support, lead, or manage smaller automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). * Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. * Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. * Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. * Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. * Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: * Bachelor's degree in engineering or 15+ years of equivalent plant experience * 5+ years in controls/automation * 3+ years in manufacturing * Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) * Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: * Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) * Mechanical/electrical experience in food manufacturing * Ability to collaborate across departments and sites * Remote management capability * Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: * Regularly required to talk and hear. * Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. * Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. * Able to lift objects up to 50 pounds frequently. * May push and pull heavy objects. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA

xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All engineers are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. About the Role As an Electrical Engineer in Training (EIT) at xAI, you'll jump into the action supporting the design, evaluation, and upkeep of the electrical systems powering our cutting-edge facilities. Working onsite with seasoned engineers and multidisciplinary teams, you'll tackle challenges to ensure our power distribution and backup systems are reliable, safe, and scalable. Expect to dive into technical details, learn fast, and contribute to solutions that keep our mission-critical operations humming, all while advancing xAI's goal of accelerating human scientific discovery through AI. Responsibilities Infrastructure Design & Planning Participate in design meetings for electrical systems in new data center builds and expansions, providing input from an electrical engineering perspective under supervision. Assist in conducting feasibility studies and developing specifications for system components. Support the design and construction process, including permitting, under the guidance of licensed engineers. System Implementation Support the installation of power distribution units (PDUs), UPS systems, cooling units, and other critical infrastructure. Ensure compliance with industry standards (e.g., Uptime Institute Tier Standards), safety regulations, and company policies, with oversight from senior engineers. Operations & Maintenance Assist in managing maintenance schedules to ensure electrical systems operate efficiently. Contribute to troubleshooting power issues, helping to minimize downtime and enhance system reliability. Capacity Management Support analysis and forecasting of power needs based on current and projected IT loads. Assist in implementing strategies for energy efficiency and cost reduction. Team Interaction Work closely with senior engineers and team members, seeking guidance and contributing to team efforts. Participate in fostering a culture of continuous improvement and learning within the team. Project Coordination Support project management for infrastructure projects, from conception through commissioning, under supervision. Assist in coordinating with external vendors, contractors, and internal departments to meet project timelines. Compliance & Safety Ensure all work complies with local, state, and federal regulations concerning electrical systems, under supervision. Promote a safe working environment, adhering to all safety protocols. Required Qualifications Bachelor's Degree in Electrical Engineering or related field. Engineer in Training (EIT) certification required. 2-4 years of relevant experience in data center operations or electrical engineering. Basic knowledge of data center electrical systems (transformers, switchgear, generators, UPS systems) Proficient with tools like AutoCAD, Revit, Bluebeam, SKM Interest in project management and supporting large-scale data center projects. xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Skills: Registered Engineer in Tennessee, Revit, CAD, 5-10 years of electrical engineer experience. Qualifications: Bachelor's degree in electrical engineering We are currently seeking an Electrical Engineer in our Lakeland, TN office with strong design and project management experience. · Perform routine aspects of electrical engineering requiring knowledge and application of basic electrical engineering principles without close supervision. · Apply concepts such as the principals of electrical circuit laws, lighting concepts and knowledge of electrical equipment to practical situations. · Researches, develops, and designs a variety of equipment, facilities, components, products, and systems for healthcare, commercial and industrial projects · Electrical systems will predominantly be for building projects, including power systems, lighting, fire alarm and other signal systems. · Evaluates the desired goal of the system and develops, designs, or selects the required equipment, power, controls, communication systems, and computer networks to achieve the goal. · Performs calculations and evaluations in the design of equipment and systems for healthcare, industrial and commercial applications. · Preparation of detailed plans and specifications substantiated by calculations and thoughtfully developed engineering solutions, to meet customer needs and all regulatory requirements. · May use computer-assisted engineering and design software and equipment to perform engineering task. · Proven leadership abilities and excellent verbal and written communication skills are essential · Maintains effective communication with project team members and with the client. · Participates in planning, cost development and management, and scheduling for assigned projects. · The individual will participate in marketing and business development activities, including development of project proposals and providing technical expertise. Requirements · Bachelors degree in electrical engineering from an accredited four-year college or university · Registered Engineer; strongly prefer licensure in the state of Tennessee. · Minimum of five (5) years' experience as an electrical engineer; 10 years' experience is preferred · Ability to demonstrate strong organizational and time management skills · Ability to interact professionally and comfortably and build and maintain excellent interpersonal relationships · Demonstrated experience with client interaction and ability to lead a team · Demonstrated experience using Revit, CAD; Proficient in Microsoft Word and Excel. · Knowledge of electrical engineer principles, practices and techniques. · Knowledge of building materials, construction methods, building codes and regulations.. · Knowledge of National Electrical Code (NFPA-70) and other National Fire Protection Association (NFPA) Codes. · Healthcare design/engineering experience preferred · LEED Accreditation is a plus Benefits · Health/Dental/Vision Insurance · Health Savings Accounts · 401k Plan · Flextime Scheduling · PTO hours (Personal Time Off) · Paid Volunteer Time Off · Family oriented atmosphere

Objective of the Job: This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Cold Mill area of Big River Steel facility. Duties and Responsibilities: 1) Ensure Safety, Environmental, Quality requirements and “where applicable” ResponsibleSteel requirements are followed. 2) Troubleshoot, repair, and perform preventative maintenance on complex electrical equipment, including PLCs, control circuits, communication systems, I/O field devices, and VFD drives/motors 3) Install or modify electrical equipment following electrical code, manuals, schematic diagrams, and other specifications with minimal instruction after general assignment 4) Use Electrical Ingenuity and Work directly with all mechanics and operations personnel in a fast-paced environment to help develop a safety focused and productive Finishing Mill Team. Support maintenance teammates to help maintain a positive and efficient work environment focused on safety and reliability. Qualifications: 1) Demonstrated safety focus and willingness to proactively apply it in a team environment 2) Quality and detail oriented with strong technical and analytical problem-solving skills 3) Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge 4) Reliable team player with good communication skills 5) Highly motivated, self-directed, and willing to put in extra hours when needed 6) 3 years minimum experience in heavy industrial environment with emphasis going to steel mill. Experience will take in account military experience, university time, apprenticeship, or combination of all. 7) Demonstrated proficiency using precision measuring instruments 8) Experienced with mobile equipment. (Rough Terrain, Man Lift, Forklift Carry Deck or Broaderson) 9) Efficient in the Metric Measuring System a plus 10) Basic computer skills: MS Excel, Word, and Outlook is a plus 11) Read Electrical drawings, blueprints, diagrams, and schematic drawings to determine work procedures 12) Knowledgeable of programming and troubleshooting logic to include ladder logic, function block programming (Logicad and Step 7) 13) Knowledgeable of VFDs, principal design, programming, and trouble shooting skills; I.O. systems (Beckhoff, Allen Bradley) and design layout; three-phase motors and ability to troubleshoot; network infrastructure; basic mechanical components in a mill; basic Hydraulic systems, how they operate and design layout 14) Willing to learn and take on multiple roles, such as mechanical and production positions as well as continually improve on primary skill set 15) HS diploma or equivalent is required; electrical degree or training is preferred. Working Conditions and Physical Requirements: Environment is typical for a steel mill production area, with extreme temperatures, high noise levels, and dusty/greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12-hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime. Supervisory Responsibility: This position does not supervise others.

Objective of the Job: This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Cold Mill area of Big River Steel facility. Duties and Responsibilities: 1) Ensure Safety, Environmental, Quality requirements and “where applicable” ResponsibleSteel requirements are followed. 2) Troubleshoot, repair, and perform preventative maintenance on complex electrical equipment, including PLCs, control circuits, communication systems, I/O field devices, and VFD drives/motors 3) Install or modify electrical equipment following electrical code, manuals, schematic diagrams, and other specifications with minimal instruction after general assignment 4) Use Electrical Ingenuity and Work directly with all mechanics and operations personnel in a fast-paced environment to help develop a safety focused and productive Finishing Mill Team. Support maintenance teammates to help maintain a positive and efficient work environment focused on safety and reliability. Qualifications: 1) Demonstrated safety focus and willingness to proactively apply it in a team environment 2) Quality and detail oriented with strong technical and analytical problem-solving skills 3) Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge 4) Reliable team player with good communication skills 5) Highly motivated, self-directed, and willing to put in extra hours when needed 6) 3 years minimum experience in heavy industrial environment with emphasis going to steel mill. Experience will take in account military experience, university time, apprenticeship, or combination of all. 7) Demonstrated proficiency using precision measuring instruments 8) Experienced with mobile equipment. (Rough Terrain, Man Lift, Forklift Carry Deck or Broaderson) 9) Efficient in the Metric Measuring System a plus 10) Basic computer skills: MS Excel, Word, and Outlook is a plus 11) Read Electrical drawings, blueprints, diagrams, and schematic drawings to determine work procedures 12) Knowledgeable of programming and troubleshooting logic to include ladder logic, function block programming (Logicad and Step 7) 13) Knowledgeable of VFDs, principal design, programming, and trouble shooting skills; I.O. systems (Beckhoff, Allen Bradley) and design layout; three-phase motors and ability to troubleshoot; network infrastructure; basic mechanical components in a mill; basic Hydraulic systems, how they operate and design layout 14) Willing to learn and take on multiple roles, such as mechanical and production positions as well as continually improve on primary skill set 15) HS diploma or equivalent is required; electrical degree or training is preferred. Working Conditions and Physical Requirements: Environment is typical for a steel mill production area, with extreme temperatures, high noise levels, and dusty/greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12-hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime. Supervisory Responsibility: This position does not supervise others.

As an Electrical Engineer at our company, you will play a crucial role in the design, development, and implementation of electrical systems and components. You will work closely with cross-functional teams to ensure that electrical systems meet quality, safety, and performance standards. Key Responsibilities Designing, developing, and testing electrical systems and components Collaborating with cross-functional teams to integrate electrical systems into products Conducting research to gather information on new technologies and materials Developing project plans, budgets, and timelines for electrical engineering projects Performing risk assessments and mitigation for electrical systems Creating and maintaining technical documentation for electrical designs and systems Providing technical support and guidance to production and installation teams Ensuring compliance with industry standards and regulations Identifying and troubleshooting electrical issues and providing solutions Managing project milestones and deliverables Collaborating with vendors and suppliers for electrical components and materials Conducting feasibility studies and cost analysis for electrical projects Participating in design reviews and recommending improvements Contributing to continuous improvement initiatives for electrical systems Training and mentoring junior electrical engineering staff Required Qualifications Bachelor's degree in Electrical Engineering or related field Professional Engineer (PE) license preferred Minimum of 5 years of experience in electrical engineering Proficiency in CAD software for electrical design Knowledge of electrical codes and regulations Experience with power distribution systems and controls Strong analytical and problem-solving skills Excellent communication and teamwork abilities Ability to manage multiple projects and priorities Understanding of safety and quality standards for electrical systems Experience with project management and resource allocation Ability to work effectively in a fast-paced environment Familiarity with sustainable and energy-efficient electrical technologies Adaptability to new technologies and industry trends Commitment to ongoing professional development and learning

Skills: 10-12 years of electrical engineer experience, Registered Engineer(PE) in Tennessee, Project Management Experience on design/build projects, Revit, AutoCADQualifications: Bachelor's degree in Electrical engineering Our client is currently seeking a Senior Electrical Engineer with strong design experience who is looking to join a growing company. This candidate can be based in our Lakeland or Nashville offices. The successful candidate shall have the following responsibilities: Provide engineering design on electrical engineering projects. Manage and assist with work on all phases of various electrical engineering projects including design development, preparation of presentation drawings and specifications, reports, design review, coordination and correlation of construction drawings. Coordinate with the design team for incorporating design intent into the construction documentation and specifications. Work with design team and A2H project managers during construction to respond to questions, provide clarifications, visit the site, solve issues, and review submittals and shop drawings. Meet with clients, regulators, and agencies to develop strong professional relationships. Maintain project document files, including meeting notes, financial information, client correspondence and project schedule. Prepare and ensure accuracy of technical documents through Quality Assurance reviews at different phases of project. Participates in planning, cost development and management, and scheduling for assigned projects. The individual will participate in marketing and business development activities, including development of project proposals and providing technical expertise. Requirements Bachelor's degree in Electrical engineering from an accredited four-year college or university. Registered Engineer; strongly prefer licensure in the state of Tennessee. Have the ability to obtain professional engineering registration in several states. Minimum of ten (10) to fifteen (15) years' experience as an electrical engineer. Project Management Experience on design/build projects Demonstrated experience using Revit Structure is essential. AutoCAD skills and experience are also essential. Knowledge of electrical engineer principles, practices and techniques. A complete understanding of integrated Construction Documents - how a complete set of drawings and specifications should communicate and quantify design intent. Demonstrated technical writing ability is desired. LEED Accreditation is certainly a plus. Ability to use technology to work with others on the design team that may be located in other offices. Ability to demonstrate strong organizational and time management skills. Ability to interact professionally and comfortably and build and maintain excellent interpersonal relationships. Proven team mentality and excellent verbal and written communication skills are essential. Demonstrated experience with client interaction and work in a team environment. Proficiency in Microsoft Office software especially Word, Excel, and Outlook. Benefits Health/Dental/Vision/Life Insurance 401k Plan Flextime Scheduling PTO hours (Personal Time Off) Paid Volunteer Time Off Family oriented atmosphere

About Us We are a mechanical, electrical, and plumbing (MEP); building automation; and industrial piping contractor. Our team offers a variety of MEP and process piping services, including design-build engineering for new construction and renovation, installation and specialty construction, maintenance, and air balancing, start-up, and energy efficiency services. Job Summary DeBra-Kuempel is seeking to fill an HVAC Controls (BAS) Engineer position for the EMCOR Services Automated Controls division in our Memphis, TN location. ESAC is seeking an energetic Building Automation System (BAS) engineering candidates - from seasoned experience control engineers to entry level individuals with an HVAC interest/background and desire to start a new direction from field work. The successful candidate would join our growing automation design team, supporting projects in the commercial and industrial markets. The controls engineer fills a critical role in the company, designing the systems architecture, setting the installation plan and pace at the beginning of a project. Candidate would possess or develop skill designing automatic temperature control and energy management systems, which includes producing control schematics, wiring diagrams, sequences of operation, programming and bill of material lists based upon customer needs and/or project plans and specifications. Training, if applicable, would consist of 6-12 months of application engineering, assisting field technicians on live systems and troubleshooting. Essential Duties & Responsibilities DUTIES AND RESPONSIBILITIES Attend project turnover meetings with the sales and project team. Design building automation systems and create project submittals/shop drawings using construction plans and specifications. Identify any gaps or ambiguity in the project and submit RFIs as required. Establish & maintain unique customer standards in design/build and plan/spec markets With experience, mentor new employees and assist in their growth Write control sequences and coordinate design intent with programmer. Provide operational and technical support/direction to field operations and subcontractors Obtain field markups and revise the shop drawings with any changes for owner records. Maintain backups of all project documentation including record drawings on construction management software program. Develop strong relationships with new and existing customers. Escalate critical and/or sensitive issues to the Engineering Manager / Project Manager with recommendation for resolution. Comply with all Company operating policies, procedures, and safety programs as established. Perform additional assignments as required by the needs of the company or as directed. QUALIFICATIONS To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PREFERRED EDUCATION and/or EXPERIENCE Associate's degree in related engineering/technology field required, bachelor's degree in mechanical or electrical engineering. In lieu of engineering/technical degree, a combination of verifiable DDC specific training and two or more years of experience will be considered. DDC or PLC design experience preferred. Strong understanding of low voltage electrical wiring. Experience in engineering, design, or installation/service of HVAC systems Strong understanding of the fundamentals of commercial electrical, HVAC, and control theory. Knowledge of the construction industry and contract documentation. COMPUTER SKILLS Must demonstrate proficiency in Microsoft Office applications, (i.e. Outlook, Word and Excel). Advanced experience with spreadsheets a plus. Familiarity with AutoCAD, Visio and other electrical, technical, or construction programs. Familiarity with building architecture and computer networks. Familiarity with third party equipment integration over protocols such as BACnet/Modbus. Programming experience is a plus. REQUIRED ATTRIBUTES The requirements listed below are representative of characteristics and demonstrated capabilities sought to perform this job successfully. Must demonstrate integrity, honesty, professionalism, and commitment to company values. Must be self-motivated and able to work efficiently in a fast-paced environment. Must have excellent organizational, communication, strategic, technical, analytical, problem solving, and multi-tasking skills. Must have high standards of quality with attention to detail. Must build positive working relationships with peers, management, suppliers, and customers. LANGUAGE SKILLS Must have the demonstrated ability to effectively communicate in English, cooperate, and collaborate with multiple levels of customer, employees, unions, government agencies, vendors and suppliers, and other contractor organizations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, see, talk, and hear. The employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is regularly required to walk, reach with hands and arms, climb or balance and stoop, kneel, crouch, or crawl. The employee may occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to commute to field locations. The employee must have the ability to navigate around job site locations. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee should expect to sit for long periods in front of a computer and also travel to field locations as needed. While visiting field locations, the employee may be required to work outdoors, be exposed to wet and/or humid conditions; moving mechanical and electrical parts; high, precarious places; dust, fumes or airborne particles; toxic or caustic chemicals; outside weather conditions, extended exposure to sunlight; cold and heat; risk of electrical shock and vibration. The noise level in the work environment is usually moderate to loud. #debra #LI-LV1 #LI-Onsite Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Control Systems Field Engineer- Memphis Control Systems Field Engineers work to maintain automation systems that control processes or machines in the desired manner. The engineer will service instrumentation, control valves, Motors/VFDs, control system electrical design, and Programmable Logic Controller (PLC) and Distributed Control System (DCS) configuration to continuously deliver an automation system that meets the user's needs. Control Systems Field Engineers demonstrate: High integrity A willingness to go beyond the ordinary to meet and exceed client expectations A desire for continual challenge and development Excellent written and verbal communication skills This specific position is for the Memphis, TN area. We are also hiring positions available at the following locations: Chattanooga, TN Denver, CO Jackson, TN Little Rock, AR Phoenix, AZ Reports To: Operations Director JOB QUALIFICATIONS Roles and responsibilities for this job may include but are not limited to: PLC and/or DCS configuration Organize project data into manageable spreadsheets and databases Human-Machine Interface (HMI) graphics development and SCADA configuration Historian configuration Perform I/O checkout on the installed control system and document the checkout results Provide post-commissioning support to the client's operations, engineering, and maintenance personnel Travel to the client's site as required. Extensive travel required. The ability to provide after-hours telephone support on a rotating schedule. Required Experience 10+ years experience maintaining automation systems and keeping production/operations running. Healthcare and Insurance Benefits Medical, Dental, and Vision Plans Company-paid Life and Accidental Death & Dismemberment Long-Term Disability Insurance (LTD) Short-Term Disability (Supplemental Option) Voluntary Life Insurance (Supplemental Option) Health Savings Accounts & Flexible Spending Accounts Wellbeing Benefits Paid Holidays and Vacation Retirement - 401K and Roth 401K w/Company Match Paid Parental Leave Paid Sick Leave Dependent Care (FSA) Employee Assistance Programs Fitness Membership Reimbursement Paid Time-off for Charitable Involvement

What You'll Be Doing Job Scope: Generally responsible for performing routine designs of less complex engineering assignments using theoretical knowledge and practical design methods. This work will be performed under direct supervision. Primary responsibilities will include but not be limited to: Familiarity with and utilization of department engineering design and drafting standards. Assisting in developing conceptual layouts and studies as necessary to determine the simplest, most efficient approach to solving engineering tasks. Assisting in producing estimate level preliminary designs and material take-offs. Assisting in producing detail design calculations, spreadsheets, reports, drawings, and sketches for various projects. Assisting engineers and designers in resolving routine layout and detailing problems. Ideal Background Education: Current enrollment in a Bachelor or Master of Science degree program for Electrical Engineering at an accredited university is required. GPA: 2.7 or above Required Knowledge, Skills, and Abilities: Familiarity with design standards and codes. Familiarity with basic mathematics and principles of three-phase electricity, including but not limited to the relationships between power units of measure (UOM) horsepower, kilowatts, KVA, and power factor; motor UOM horsepower, speed and torque. Working knowledge of CAD software, either AutoCAD, MicroStation or both. Proficient in the use of Microsoft Word, Excel, PowerPoint, Access, and Outlook. Good communication skills, both verbal and written. Physical Requirements Ability to sit, stand, or walk for long periods of time. #LI-MR1 Hargrove Culture We work to create an environment founded on trust, personal integrity, and a “team mentality” so that each person understands the value of their contributions both on a project and company-wide level. We know that each person on our team contributes to the success of our company by pairing expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our safety culture protects and promotes the well-being of every person who works with us and every person touched by our work. As a 100% Teammate owned company, we proudly offer a comprehensive benefits package including, paid holidays, personal paid time off, medical, dental, vision, life, and disability insurance, 401(k), and other benefits to eligible Teammates. Equal Opportunity Employment Statement Hargrove is an Equal Opportunity/Affirmative Action employer. We do not discriminate based upon race, color, national origin, religion, age, sex (including gender, sexual orientation, pregnancy, sexual identity, marital or family status), disability, military service or obligations, veteran status, or any other characteristic protected by law. Hargrove is a drug-free workplace. The selected candidate must be authorized to work in the United States.

As our Project Engineer, you'll: Lead capital projects from concept to completion, managing budgets, schedules, and resources. Collaborate with engineering, operations, procurement, and construction teams to ensure project success. Conduct feasibility studies, technical evaluations, and manage contractors/vendors to meet project specifications. Ensure safety, environmental, and regulatory compliance every step of the way. Implement continuous improvement initiatives to optimize processes and outcomes. What You Bring: Bachelor's in Chemical, Mechanical, or related Engineering. 5+ years in project management or engineering in a chemical/industrial environment. Knowledge of project management tools (MS Project, Primavera). PMP certification is a plus. Strong communication, problem-solving, and collaboration skills. ✨ Step into a role where your expertise makes an impact every day. Lead projects, shape operations, and grow your career with Mitsubishi Chemical! The salary range for this position is $139,100-$146,800. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting. Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System.

As our Project Engineer, you'll: + Lead **capital projects from concept to completion** , managing budgets, schedules, and resources. + Collaborate with **engineering, operations, procurement, and construction teams** to ensure project success. + Conduct feasibility studies, technical evaluations, and manage contractors/vendors to meet project specifications. + Ensure **safety, environmental, and regulatory compliance** every step of the way. + Implement **continuous improvement initiatives** to optimize processes and outcomes. **What You Bring:** + Bachelor's in Chemical, Mechanical, or related Engineering. + 5+ years in project management or engineering in a chemical/industrial environment. + Knowledge of project management tools (MS Project, Primavera). + PMP certification is a plus. + Strong communication, problem-solving, and collaboration skills. ✨ Step into a role where your expertise makes an impact every day. **Lead projects, shape operations, and grow your career with Mitsubishi Chemical!** **The salary range for this position is $139,100-$146,800. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting.** **Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System.**

Manufacturing Management Associate - Project Engineer - Leadership Development Program Pay Range: $82,000 - $92,000 **Multiple factors, including Individual experience, skills and abilities, and geographic location will determine where an employee is ultimately placed in the pay range. **Variable pay may provide additional opportunities for financial awards. This job is eligible to participate in IP's short -term incentive plan . Category/Shift: Salaried Full-Time Physical Location: Remote role with extensive site travel Program Overview: We are looking for motivated individuals who have a solid professional foundation and an interest in growing their career with our world-class manufacturing company. This program is intended to expand your knowledge and skills through a variety of hands-on manufacturing and business experiences and to develop you as a future leader in International Paper. The Manufacturing Manager Associate Program offers a unique leadership pathway, with opportunities now available at several of our 160+ U.S. manufacturing plants. These facilities manufacture sustainable packaging solutions for local and national customers. The Job You Will Perform: Develop knowledge of key manufacturing metrics and their impacts on the business; seek opportunities to enhance performance to best in class Accompany project engineers on a variety of complexity assigned projects to better understand the engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations Gain comprehensive understanding of applicable industry governing codes in addition to federal health & safety policies/laws Become educated in project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing projects Become familiar with the engineering practices used in installation of corrugated manufacturing equipment and/or plant infrastructure improvements Knowledge and understanding of contractor services - mechanical, electrical, and structural Upon successful integration with the company and understanding of the industry and business segment, the Manufacturing Management Associate will be expected to take on role as a project engineer and project manager in support of the business. The Qualifications, Skills and Knowledge You Will Bring: Bachelor of Science degree in an engineering discipline from an accredited university is required. Proficiency in Microsoft Office Suite, including Microsoft Project Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. Direct experience or internship with a manufacturing company is a plus. Successful candidates will have problem solving skills, be action oriented, ability to manage multiple projects with varying priorities, competency in functional and technical subjects, communication skills, computer skills and the ability to work in a team environment. Candidate's ability to travel is required; duration of travel can exceed a week. Permanent relocation to Memphis is not required.

Corporate Project Engineer Are you interested in working for a company that offers both a challenging work environment and a rewarding career path? The primary responsibility of this position is to provide mechanical engineering services and support in order to promote safe, efficient, and reliable production runs to operations including the implementation and delivery of cost-effective capital and major maintenance projects. What You Will Do: Assist in the conceptualization, development, and execution of capital projects Develop a detailed scope of work, budgets, and schedules Assist in preparation of Authorization for Expenditure (AFE) requests Assist with project construction, commissioning, and handover Consult with supervisors, tradespeople, operators, and purchasers Provide input into the design and optimization of equipment to maximize reliability and performance Solicit contractors, vendors, and consultants Conduct engineering reviews of project plans, drawings, materials, and installations Ability to coordinate, facilitate and conduct internal and external project review meetings Supervise trades and contractors for safety and quality Act as a point of contact/liaison, provide technical support for consulting engineers, contractors, suppliers, and external agencies Travel to all US manufacturing facilities to provide technical support including troubleshooting, problem-solving, equipment assessments, and sharing of best practices and corporate standards Study and understand process flows, and equipment functionality Handle a wide range of verbal, written, and presentation communications including progress report writing, presentations on project status to peers, managers, and mill employees Provide auxiliary support to facilities for shutdowns, safety projects, and other duties as assigned Understand and apply applicable external codes and standards and regulations (ie. OSHA, NFPA, Building Code, etc.) Assist in the development of internal safety and project standards Special projects and other duties as assigned. Qualifications You Will Need: Completion of a Mechanical (or related) Engineering Degree from an accredited institution is required Must have 3 to 5 years of recent experience working as an engineer in construction project management for heavy manufacturing (Metal, Steel, Wood, Automotive): Excellent skills in all forms of communication The ability to read Civil, Structural, and Mechanical Drawings is required Proven interpersonal and leadership/supervisory skills including planning, organizing, directing, and monitoring of work activities to achieve project objectives Strong computer skills with experience in MS Office, AutoCAD, SolidWorks, and Microsoft Power BI are required Strong problem-solving and project management skills are required Ability to work independently as well as part of a team Self-starter with a desire to progress, learn, grow and succeed Ability to communicate effectively in oral and written form with all levels of the organization As a member of the engineering group, you will be expected to model/lead safety behavior, be positive and supportive of company goals and objectives, and value diversity. Embody the company traits of integrity, respect, humility, hard work, and frugality Preferred skills Preference is given to applicants with 5 years in a manufacturing or industrial environment Package Details Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1 Competitive starting pay On-the-job training and a A culture that strongly believes in promoting from within Medical Dental 401k with company matching & retirement contribution Employee stock purchase plan Life Insurance Disability Insurance Paid vacations and holidays

Job DescriptionDescriptionWaggoner Engineering, Inc. is hiring a Project Engineer for our office in Hernando, MS to provide quality planning, designing and technical overview to assist the Project Manager/Client Account Manager in delivering project, within budgetary and time constraints. Are you ready to inspire, engage and deliver? For almost 50 years Waggoner has delivered sound results through a culture of integrity, service and creativity to benefit our clients. Waggoner has more than doubled in size over the last five years and growth is expected to significantly increase through the addition of talented personnel. What does that mean for you? Waggoner differentiates itself as a leader in growth strategy for water and disaster recovery, as well as providing full engineering services across 14 offices and 5 states; we need people who are inspired for future growth, engage as leaders in their respective fields, and deliver to both internal and external clients. If you are tired of hearing “we've always done it this way”; if you have a work hard/play hard attitude; and if you enjoy working with a vast team of professionals across various disciplines, you will fit right into our culture. Your Primary Responsibilities will include Performs engineering analyses and evaluations (primarily computer-based) in support of the planning and design of civil works projects, including but not limited to the following areas: Bridge hydraulics Flood hazard mapping Hydrologic analysis Hydraulic modeling - multi-dimensional Scour analysis Performs analysis and design of stormwater management facilities for roadway drainage, site drainage, retention/detention and other projects. Conducts assessment and evaluation of stormwater management conditions and develops recommended remedial measures. Maintains and documents written and verbal communications with clients throughout the development and completion of a project. Conducts project status review with project manager and team members, checking accuracy of work completed, and monitors timeliness of project completion. Attends meetings on project management. Assists Project Managers with administrative duties concerning completion of assigned projects, including review of schedules, scopes and budgets. Assists Project Manager in preparation of engineering studies and reports. Provides technical guidance and training to members of the project team. Prepares project design using sound engineering principles, engineering software and tools. Assists in preparation of contract documents and technical specifications. What you'll need Bachelor's degree in Engineering Professional Engineer license or ability to obtain one within a reasonable timeframe. 3 to 5 years of wastewater design experience; transportation is a plus Why Join Our Team We know work isn't only about what you do, it's also about who you work for and with! Waggoner Engineering provides a fun, family-friendly, and multicultural work environment that supports a work life balance, including: WEI Incentive Program Healthy Workplace Program Employee Referral Bonus Competitive Health Benefits Career Development and Training Flexible/Hybrid Schedule Community Service Opportunities Worldwide Travel Assistance Waggoner Engineering, Inc. is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Position Overview: We are looking for a motivated and detail-oriented Project Engineer to join our dynamic team in Oxford, MS. In this role, you will be essential in managing and executing engineering projects from inception to completion, ensuring all deliverables meet quality standards, budget constraints, and timelines. Key Responsibilities: Project Management: Lead and coordinate engineering projects, ensuring compliance with project plans, schedules, and budgets. Design Development: Collaborate with design teams to create technical specifications, drawings, and engineering documentation. Quality Assurance: Monitor project performance to ensure adherence to industry standards, regulations, and company policies. Communication: Act as the primary liaison between clients, contractors, and internal teams, facilitating effective communication. Problem-Solving: Proactively identify and address project-related issues, implementing solutions to mitigate risks and ensure success. Documentation: Maintain accurate records of project progress, changes, and outcomes, preparing reports for management and stakeholders. Collaboration: Work closely with cross-functional teams, including engineering, procurement, and construction, to achieve project objectives. Qualifications: Bachelors degree in Engineering (Civil, Mechanical, Electrical, or a related field) 2+ years of experience in project engineering or related roles, preferably in construction or manufacturing environments Proficiency in project management software and engineering design tools Strong analytical and problem-solving skills Excellent communication and interpersonal abilities Ability to work independently as well as collaboratively in a team environment Compensation and Benefits: Salary: Competitive and commensurate with experience Health, Vision, and Dental Insurance: Comprehensive coverage options available 401(k) Plan: Company matches 4% for a 5% contribution Vacation: 2 weeks of paid vacation per year Sick Leave: 3 days of paid sick leave per year If you are ready to take on a challenging role in a supportive environment, we encourage you to apply and join our team!

xAI's mission is to create AI systems that can accurately understand the universe and aid humanity in its pursuit of knowledge. Our team is small, highly motivated, and focused on engineering excellence. This organization is for individuals who appreciate challenging themselves and thrive on curiosity. We operate with a flat organizational structure. All employees are expected to be hands-on and to contribute directly to the company's mission. Leadership is given to those who show initiative and consistently deliver excellence. Work ethic and strong prioritization skills are important. All engineers are expected to have strong communication skills. They should be able to concisely and accurately share knowledge with their teammates. About the Role As an Electrical Engineer in Training (EIT) at xAI, you'll jump into the action supporting the design, evaluation, and upkeep of the electrical systems powering our cutting-edge facilities. Working onsite with seasoned engineers and multidisciplinary teams, you'll tackle challenges to ensure our power distribution and backup systems are reliable, safe, and scalable. Expect to dive into technical details, learn fast, and contribute to solutions that keep our mission-critical operations humming, all while advancing xAI's goal of accelerating human scientific discovery through AI. Responsibilities Infrastructure Design & Planning Participate in design meetings for electrical systems in new data center builds and expansions, providing input from an electrical engineering perspective under supervision. Assist in conducting feasibility studies and developing specifications for system components. Support the design and construction process, including permitting, under the guidance of licensed engineers. System Implementation Support the installation of power distribution units (PDUs), UPS systems, cooling units, and other critical infrastructure. Ensure compliance with industry standards (e.g., Uptime Institute Tier Standards), safety regulations, and company policies, with oversight from senior engineers. Operations & Maintenance Assist in managing maintenance schedules to ensure electrical systems operate efficiently. Contribute to troubleshooting power issues, helping to minimize downtime and enhance system reliability. Capacity Management Support analysis and forecasting of power needs based on current and projected IT loads. Assist in implementing strategies for energy efficiency and cost reduction. Team Interaction Work closely with senior engineers and team members, seeking guidance and contributing to team efforts. Participate in fostering a culture of continuous improvement and learning within the team. Project Coordination Support project management for infrastructure projects, from conception through commissioning, under supervision. Assist in coordinating with external vendors, contractors, and internal departments to meet project timelines. Compliance & Safety Ensure all work complies with local, state, and federal regulations concerning electrical systems, under supervision. Promote a safe working environment, adhering to all safety protocols. Required Qualifications Bachelor's Degree in Electrical Engineering or related field. Engineer in Training (EIT) certification required. 2-4 years of relevant experience in data center operations or electrical engineering. Basic knowledge of data center electrical systems (transformers, switchgear, generators, UPS systems) Proficient with tools like AutoCAD, Revit, Bluebeam, SKM Interest in project management and supporting large-scale data center projects. xAI is an equal opportunity employer. For details on data processing, view our Recruitment Privacy Notice.

Control Systems Engineers work to design automation systems that control the process or machine in the desired manner. The engineer will apply instrumentation, control valves, Motors/VFDs, control system electrical design, and Programmable Logic Controller (PLC) and Distributed Control System (DCS) configuration to deliver an automation system that meets the user's needs utilizing the minimum essential design. Control Systems Engineers demonstrate: High integrity A willingness to go beyond the ordinary to meet and exceed client expectations A desire for continual challenge and development Excellent written and verbal communication skills Reports To: Operations Director JOB QUALIFICATIONS Roles and responsibilities for this job may include but are not limited to: PLC and/or DCS configuration Organize project data into manageable spreadsheets and databases Human-Machine Interface (HMI) graphics development and SCADA configuration Historian configuration Perform I/O checkout on the installed control system and document the checkout results Provide post-commissioning support to the client's operations, engineering, and maintenance personnel Travel to the client's site as required Required Experience Degreed in Engineering (Electrical, Mechanical, Chemical, or similar), Computer Science, or similar scientific / technical field Ideal Experience Co-op or intern experience in an Industrial environment Familiarity and/or coursework with basic AC and DC electric circuits Familiarity and/or coursework with computer programming concepts