Electrical engineer internship jobs in Cocoa, FL

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aerospace Systems has an opening for an Electronic Warfare Engineer/Principal Electronic Warfare Engineer to join our team of qualified, diverse individuals. This position will be in Melbourne, FL. **This position may be filled by either at the Electronic Warfare Engineer level OR at the Principal Electronic Warfare Engineer level based on the qualifications listed.** The successful engineer will contribute to the overall development of Electronic Warfare subsystems, including developing functional architectures, analyzing performance, developing and managing requirements and interfaces, and verifying/validating all allocated requirements. You will design, develop, build, and test EW systems in conjunction with key suppliers. Roles and Responsibilities: Support development and integration of electronic warfare subsystems and components to meet platform mission objectives Requirements development, analysis, maturation and implementation translating customer requirements into hardware and software specifications Perform MBSE and capturing requirements, interfaces, behaviors, structures and parametrics Performing functional and performance analyses Conducting detailed trade studies Collaborate with engineers and program stakeholders Developing and maintaining supplier documentation, performance based specifications, and statements of work Review documents from the supplier's development effort and support supplier technical interchange meetings and design reviews Perform informal and formal testing of subsystem requirements in lab, troubleshooting hardware in the lab Perform aircraft ground and flight test on subsystems to validate and verify subsystem requirement and sell-off Basic Qualifications: Electronic Warfare Engineer (T02): Must have a Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university AND 2 years of related professional/military experience in Engineering; OR a Master's degree in a (STEM) discipline from an accredited university AND 0 years of related professional/military experience in Engineering; or a Ph.D. (STEM) AND 0 years of related professional/military experience in Engineering. Your ability to transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Basic Qualifications: Principal Electronic Warfare Engineer (T03): Must have a Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university AND 5 years of related professional/military experience in Engineering; OR a Master's degree in a (STEM) discipline from an accredited university AND 3 years of related professional/military experience in Engineering; or a Ph.D. (STEM) AND 0 years of related professional/military experience in Engineering. Your ability to transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Preferred Qualifications: Knowledge of electromagnetics in the RF spectrum (VHF through Ka bands) Knowledge of electronics design and test Familiarity with Model BASED Systems Engineering and SysML tools such as Cameo Experience in performance analysis using MATLAB and Excel or similar tools #AS-FA3 Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit *********************************** U.S. Citizenship is required for most positions. Primary Level Salary Range: $77,200.00 - $115,800.00Secondary Level Salary Range: $95,300.00 - $142,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Secondary Locations Job Code **18898** \# of openings **1** Apply Now (**************************************************** Requisition?org=POWERENGINEERS&cws=44&rid=18898) **This Opportunity -** **Electrical Engineering Intern (Substations) - Summer 2026** Our POWER team is seeking a **Full Time Electrical Engineering Intern (Substations) - Summer 2026** to work out of our **Orlando, FL** office. This temporary position is seeking individuals currently enrolled in an Undergraduate or Graduate degree program. WSP USA hosts hundreds of internships across the United States to gain hands-on, meaningful work experience to enhance their education and professional aptitude. Our interns gain exposure to real projects while working side by side with senior staff. Through our Developing Professionals Network, interns gain mentorship, networking opportunities and lifelong career connections. This internship is anticipated to take place during the Summer 2026 semester. The program is anticipated to take place from May 2026 through August 2026. The individual start date is flexible. **Your Impact** + Support a variety of engineering tasks with the goal to develop technical, social, and ethical skills. + Learn basic principles of Electrical Engineering. + Work under guidance of experienced engineers on all aspects of substation design during internship + Participate in development of substation design components including: One-line diagrams, schematics, wiring diagrams, SCADA and communications, physical layouts, sections/elevations, cable and conduit plans and details, ground grid, foundation, and structural plans, control enclosure, lightning protection, yard lighting plans, bills of materials + Learn and adhere to client standards and processes + Work independently or within a team to complete complex, challenging designs + Perform design calculations using industry standards (IEEE, NEC, NESC, etc.) + Assist senior engineers with QA/QC design checks + Possible participation in site visits + Complete training on assigned tasks. + Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. + Perform additional responsibilities as required by business needs. + Please note that there is no relocation or housing assistance associated with this internship. **Who You Are** **Required Qualifications** + Actively enrolled in an accredited Electrical Engineering, or related, Undergraduate program with an anticipated graduation date of August 2026 or later. + Must be 18 or older. + Demonstrated interest in consulting engineering, electric utility industry, or related field, and have a strong desire to advance skills related to WSP's work and projects. + Competent interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience. + Capable of taking direction from leadership, mentors, and managers to executive projects. + Basic proficiency with technical writing, office automation, software, spreadsheets, technology, and tools. + Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies. + Authorization to work in the United States at the start of the internship. **Preferred Qualifications** + Successful completion of junior-level courses in power system analysis and/or power system protection + Prior internship and/or related engineering experience is a plus. + Students who have passed or are scheduled to take the FE/EIT exam will be strongly considered for this position. + Familiarity with design, drafting or engineering software such as MATHCAD, SOLIDWORKS, AUTOCAD, etc. as well as Microsoft Excel is beneficial. POWER Engineers, Member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. Together, POWER and WSP's 73,900 experts create positive, long-lasting impacts for our communities and our clients in the power and energy, transportation and infrastructure, environmental, and property and buildings sectors. As part of our team, you'll discover a world of opportunities to connect with innovative thinkers, forge your path, and have fun tackling the world's most challenging projects. At POWER Engineers, Member of WSP, you can have a rewarding career on every level. Our philosophy is simple: Do Good. Have Fun. Build Success. We are a fun engineering firm. That might seem contradictory to some, but it works for us! POWER is an Equal Opportunity Employer, including women, minorities, veterans and individuals with disabilities. \#LI-GA1

Electrical Engineering Intern - Electric Power Software and Modelling Florida Municipal Power Agency (FMPA) is a wholesale power agency owned by municipal electric utilities in Florida. FMPA's mission is to provide power that is low-cost, reliable and clean, as well as provide value-added services for its owner-customers. FMPA is looking for a qualified student to be part of our Engineering Services Department working on a variety of assignments related to modeling, mapping and power system analysis for electrical systems at FMPA's electric power plants as well as electric distribution systems of FMPA's member utilities. Position Status Full Time for Spring 2026 Job Overview The selected student would be responsible for updating or creating one line and three line diagrams in AutoCAD. Settings review in ETAP PowerStation (modeling of large electric power plants). Produce bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. No experience in these software platforms is required. FMPA Engineers and Member Services staff will provide oversight, guidance and the necessary training in the use of the software platforms. Other assignments will be in related fields as agreed and as time allows. This is an excellent opportunity for students to learn about real apparatus and design conventions applied at electric power plants and in electric utility distribution systems in the field while gaining experience using widely adopted electric power industry software platforms. Required Program of Study Electrical Engineering / Computer Engineering preferred. Other Engineering programs of study may be considered if sufficient electric circuits and Power System coursework has been performed. Required Skills Familiarity with Word and Excel Solid verbal and written communications skills Organized and task-oriented Experience with AutoCAD is valuable but not required Understand power system theory - 3-phase vector math, power factor, symmetrical components Class Standing Junior or Senior preferred. Sophomores may be considered with appreciable completed coursework.

**Job ID: 113025** The Leonardo DRS Land Electronics business provides C4I Network computing and integrated situational awareness, as well as state-of-the-art embedded diagnostics, vehicle power management and combat vehicle integration products and services. **Job Summary** **Electrical Engineer Internship: Power Up Your Future!** **_Ready to kick-start your career?_** **_Join the World of Advanced Tactical Systems!_** We invite you to apply as a Summer 2025 Intern with DRS Land Electronics in Melbourne, FL. Work at the core of innovation for compute and display systems in military vehicles, contributing to advanced defense technology. **What You Will Do** **As a Leonardo DRS Electrical Engineer Intern, you will:** - **Contribute Meaningfully** : Assist in the design, development, analysis, and testing of electronic products and systems. Work with experienced engineers who will support your development. - **Work with Modern Technology** : Gain practical experience with industry-leading computer-aided engineering (CAE) software. See your designs come to life. - **Learn About Components** : Understand electronic components, subsystems, and services. Learn how to select and evaluate components for critical projects. - **Engage in Circuit Design** : Participate in creating schematics, conducting circuit analysis, and engaging in trade studies to expand your circuit design skills. - **Apply Your Knowledge** : Integrate academic learning into real-world applications, contributing to our configuration management systems and project execution. - **Collaborate with Experts** : Join peers and leaders in design and project reviews, helping develop pioneering technology. **Qualifications** **Required Qualifications** - Currently enrolled in an undergraduate or master's program in Electrical Engineering, Computer Engineering, or Physics (with a focus on electronics). - At least two years of academic experience with a GPA of 3.0 or higher. - Ability to work effectively independently and in a team. - Strong, pro-active problem-solving skills. - Ability to support a 40 hour per week onsite schedule. **Desired Qualifications** - Familiarity with schematic entry and PCB layout design tools. - Familiarity with MATLAB or Mathcad. - Familiarity with LTSpice or other SPICE analysis tools. - Experience with circuit analysis in digital, analog, and/or power domains. - Understanding of technical drawings and manufacturing processes. - Proficiency in MS Office 365. _Only candidates that meet the qualifications set forth above are eligible to be contacted for further information. We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas._ _Taking care of our people is a top priority at Leonardo DRS. We are proud to offer competitive salaries and comprehensive benefits, including medical, dental, and vision coverage, a company contribution to a health savings account, telemedicine, life and disability insurance, legal insurance, and a 401(k) savings plan. We champion wellness programs that focus on physical, emotional, and financial well-being. We develop our talent by offering programs and activities to support career-growth, professional development, and skill enhancement. And we understand there is more to life than work, and the importance of offering flexible work schedules with our 9/80 program, competitive vacation, health/emergency leave, paid parental leave, and community service hours._ _*Some employees are eligible for limited benefits only_ _Leonardo DRS, Inc. and its subsidiaries provide equal opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws. #LEL_

United States of America , Melbourne, FL, 32902-2704 USA ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. **Security Clearance:** None/Not Required Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops, and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX. Participants in the Electrical Engineering internship program will have the opportunity to work with the CNS Electrical Engineering department within Collins Aerospace to learn aspects of the Electrical design, simulations, test, and analysis of Aircraft Navigation products/systems. This role is onsite, in Melbourne, FL. This role may be eligible for relocation. What **You** Will Do: + Will assist in researching, developing, simulating, designing, and testing electrical components, sub systems and systems as well as resolving day-to-day technical problems by troubleshooting electrical devices / circuits problems in the lab. + Completes engineering documentation / designs as required, operates engineering lab equipment, and confers with stakeholders regarding engineering projects. + Performs engineering work and applied research, development, and design for Avionics products to ensure quality standards and functional objectives are met. What **You** Will Learn: + You will gain knowledge about designing electrical components, circuits, products, and systems for Aircraft Avionics purposes. + You will gain knowledge in analyzing and evaluating new or improved electrical/electronic components and networks. Qualifications **You** Must Have: + Requires a High School Diploma or equivalent and student must be pursuing a Bachelor's or advanced degree in an applicable discipline. + U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: ********************************************************************************************** . Qualifications We Prefer: + Electrical Circuits and Analysis (DC and AC) knowledge. + Electrical Circuits Simulation experience. + MATLAB experience. + Experience with Oscilloscope, Spectrum Analyzer, Network Analyzer. **Learn More and Apply Now!** Our Avionics team advances flight deck solutions, airborne communications, vision systems, sensors and fire protection for commercial and military customers around the world. That means we're helping people reach their destination safely and keeping pilots, passengers, flight crews, airlines, airports and military personnel connected and informed. And we're providing industry-leading fire protection and safety systems that our customers can count on when it matters most. Are you ready to learn from the most knowledgeable experts in the industry, develop the technologies of tomorrow and reach new heights in your career? Join our Avionics team today. Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. **WE ARE REDEFINING AEROSPACE.** * Please consider the following role type definitions as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 37,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** The **Electrical Engineer** will be responsible for leading the design, development, and evaluation of complex electrical systems and components for the Live Event Industry. You will collaborate closely with cross-functional teams, provide technical leadership, and play a pivotal role in the execution of projects that drive innovation and excellence in the field of electrical engineering. If you are a dynamic engineer with a proven track record, we invite you to join our team and contribute to our mission of delivering cutting-edge solutions. **Essential Responsibilities / Accountabilities** + Design control systems which meet or exceed client specifications while providing maximum value for our portable and fixed install clients. + Work with a lead designer to or directly performs engineering analyses of electrical loads, component layout, and functional safety of the control system. + Perform optimization and value engineering reviews of both existing and new equipment for improvements in manufacturing cost and efficiency. This includes the research and specification of components from industry manufacturers for electrical designs. This also includes re-use and modification of existing designs. + Prepare bills of materials for finished electrical assemblies and assist in the procurement of outside vendor parts and services. + Central responsibility in the creation of finished electrical assembly and fabrication drawings, contribution to O&M manuals, and final client submittal packages. + Continue to expand our application of emerging technologies for the purpose of designing and producing leading edge controls technology. + Adhere to all company safety policies and procedures. + Attend meetings, seminars, and training sessions as required. + Perform assigned duties according to the policies and expectations prescribed by the company. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodations may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Behavioral Competencies** + **Problem-Solving:** Proficiency in analyzing and solving complex electrical engineering challenges, using innovative approaches when necessary. + **Technical Excellence:** A track record of advanced technical knowledge and expertise in electrical engineering principles and practices. + **Communication:** Effective communication skills, both verbal and written, for conveying technical information to team members, stakeholders, and non-technical audiences. + **Project Management:** Strong project management skills, including the ability to plan, coordinate, and execute electrical engineering projects effectively. + **Leadership:** Demonstrated ability to lead and mentor teams of engineers, providing guidance and direction on complex projects. + **Collaboration:** The capability to work seamlessly with cross-functional teams, including engineers from other disciplines and project managers, to achieve project objectives. + **Adaptability:** Being open to adopting new technologies, methodologies, and industry standards and adjusting strategies to meet evolving project requirements. + **Safety Focus:** Demonstrated dedication to adhering to safety protocols and guidelines to maintain a safe working environment for self and colleagues. + **Innovation:** A commitment to exploring and implementing innovative solutions in electrical engineering to drive continuous improvement and competitiveness. + **Mentorship:** A willingness to mentor and support junior engineers, fostering their professional growth and development within the field of electrical engineering. **Minimum Qualifications** + BS in Electrical Engineering, Technical Theatre with emphasis in Electrical Design, or High School Diploma/GED and equivalent work experience listed below. + 2+ years in Electrical Design and Engineering with formal degree + 4+ years in Electrical Design and Engineering without formal degree + Intermediate level of CAD experience required + Knowledge and experience in: + UL508A and NEC/NFPA concepts + Industrial control system knowledge (IE PLC's and VFD's) + Beckhoff knowledge is a plus + Siemens knowledge is a plus **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.). **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes, safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location + Must able to view and complete project work on a computer monitor or equipment screens for extended periods of time \#LI-AB1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

The Construction Electrical Engineer II will be expected to plan and execute procedures and provide technical support for construction and commissioning activities of CCGT projects and will work under the direction of the Manager, Electrical Technical Support or Section Team Leader to coordinate activities with Engineering, Technical Field Advisors in the field, Vendors and Contractors at site. Additionally, employees are required to have general knowledge of construction processes along with specific skills set with Gas Turbine field engineering execution. - Coordinate internally with site managers, suppliers, and engineering teams to ensure resolution of issues. - Manage moderately complex site issues independently, such as resolving minor construction deviations or coordinating supplier clarifications. - Plan construction support activities for specific systems, ensuring integration with project schedule. - Observes and ensures construction practices as required for compliance of construction operations/execution with federal, state, and local codes, industry standards, company procedures, and contractual requirements. - Gather approved required documents and information to support the successful completion of relevant construction activities/requirements. Study and understand the project specifications, procedures, and relevant portions of the Contract. - Creation of erection and commissioning procedures to support Gas Turbine and auxiliary system ground up installation, and other areas as assigned. - Responsible for adhering to and promoting safe work practices. - Responsible for Technical tasks of assigned projects under limited supervision of Engineering Manager - Responsible for Providing Timely Solution for PAR (Project Action Request). Includes tracking, working with quality, project/process/design engineering, suppliers, Field TFA team and supply chain. - Examine drawings for completeness, detail, and accuracy as peer reviewer. Checks manufacturers' prints and coordinates between these and the company drawings - Participate in a work environment of openness, trust, communication, teamwork, innovation, and satisfaction. - Coordinate with Mitsubishi site teams, suppliers, quality teams, and contractors to ensure proper installation and commissioning of power plant electrical systems. Additional Skills & Qualifications Education and/or Experience: - Bachelor's degree (BS) in Engineering from college or university and five (5) years' experience with Gas Turbine; or, seven (7) years related experience with Gas Turbines. Familiarity with Combined Cycle Power Plant Equipment is required. Experience with ISO procedures and OSHA safety requirements would be an asset. International experience is desirable. Understanding of Power plant equipment such as pumps, condensers, cooling towers, rotating equipment, turbines, material handling, water treatment, valves, and heat exchangers. Language Skills: - Ability to read, analyze, and interpret engineered drawings, technical procedures, supplier documentation, schedules, and material take-off. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Strong understanding of spoken and written English. Reasoning Ability: - Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: Knowledge of Microsoft Word, Excel, Power point, Sharepoint, electronic mail etc. Experience Level Intermediate Level Job Type & Location This is a Permanent position based out of Lake Mary, FL. Pay and Benefits The pay range for this position is $85000.00 - $100000.00/yr. 13 Holidays 12 days of PTO Unlimited sick time Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lake Mary,FL. Application Deadline This position is anticipated to close on Dec 19, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job DescriptionBenefits: Bonus based on performance Competitive salary Free uniforms Opportunity for advancement Paid time off Training & development We are seeking a skilled and licensed Electrical Engineer to join our team. The ideal candidate will have a minimum of 2 years of experience in the field, with strong skills in estimating and proficiency in AutoCAD. This role requires 65% ability to travel in the state of Florida, a clear driving record, and the ability to pass a background check. Key Responsibilities: Design electrical systems. Prepare and review electrical designs, drawings, and specifications using AutoCAD. Estimate project costs and prepare detailed proposals. Conduct site inspections and ensure compliance with safety standards and regulations. Collaborate with project managers, contractors, and clients to ensure successful project completion. Troubleshoot and resolve electrical issues in a timely manner. Maintain accurate records and documentation of all electrical work. Qualifications: Licensed Electrical Engineer. Minimum of 2 years of experience in the electrical engineering field. Proficiency in AutoCAD and other relevant design software. Strong estimating skills and experience preparing project proposals. Excellent problem-solving abilities and attention to detail. Clear driving record. Ability to pass a background check. Strong communication and interpersonal skills. Bilingual Prefer (English - Spanish)

Job Description Airbus U.S. Space & Defense, Inc offers advanced solutions to meet the most complex U.S. defense, security, space, and intelligence requirements. Celebrating over 50 years in the US, we remain a trusted government partner, leveraging world-class satellite, laser communication, rotor and fixed wing solutions to help our national security, defense and space focused customers meet their missions. Airbus U.S. looks to employ a commitment driven team, dedicated to enabling our customer's mission success. We are committed to maintaining a diverse and inclusive work environment and a welcoming and engaging staff. With competitive compensation and superior employee benefits, as well as a commitment to fostering individual career growth, Airbus U.S. is the place where top talent wants to work. Position Summary As an Electrical Engineer II focused on Electrical Ground Support Equipment (EGSE) at Airbus U.S. Space & Defense, you will be a key contributor within the Electrical Manufacturing Engineering team, supporting the design, validation, integration, and optimization of EGSE systems used for spacecraft test and verification. Your role will involve hands-on engineering work across the EGSE lifecycle-including requirements development, troubleshooting, system enhancements, and cross-functional coordination-to ensure high system performance and reliability in support of satellite programs. Responsibilities EGSE System Design & Development • Support the design, development, and deployment of EGSE systems including hardware interfaces, power supplies, data buses, and communication links. • Ensure EGSE systems meet program requirements, technical specifications, and quality standards. • Assist in the development of test procedures, system configurations, and validation protocols. Troubleshooting & Support • Diagnose and resolve complex technical issues related to EGSE systems during integration and test campaigns. • Provide real-time support during system-level test activities, including anomaly resolution and root cause analysis. • Document and implement improvements to EGSE tools, processes, and procedures based on findings. System Integration & Validation • Perform integration and functional verification of EGSE hardware and software components. • Contribute to system-level testing by ensuring EGSE accurately replicates spacecraft interfaces and functionality. • Validate EGSE performance through rigorous testing and support configuration control of test systems. Collaboration & Process Coordination • Work closely with Design Engineering, Manufacturing, Quality Assurance, and IT teams to ensure EGSE solutions meet operational needs. • Participate in design reviews, readiness assessments, and failure review boards. • Collaborate with Procurement and Supply Chain teams for hardware sourcing and vendor technical support. Documentation & Reporting • Maintain detailed documentation of EGSE configurations, modifications, and validation activities. • Support change control processes by documenting engineering changes, system upgrades, and technical decisions. • Generate and maintain reports for internal and customer-facing reviews. Qualifications Education: • Bachelor's degree in Electrical Engineering, Aerospace Engineering, Computer Engineering, or a related technical discipline required. Experience: • 3-6 years of experience in electrical engineering, with a focus on test systems or EGSE preferred. • Experience supporting hardware/software integration and validation in a space or aerospace environment. • Demonstrated ability to troubleshoot and resolve complex system-level technical issues. • Familiarity with spacecraft electrical systems and test environments a plus. Knowledge, Skills, Demonstrated Capabilities EGSE Engineering Expertise: • Solid understanding of EGSE architectures, including power, data, and communication interfaces. • Proficient in interpreting schematics, wiring diagrams, and system requirements. Testing & Debugging: • Skilled in using test equipment such as oscilloscopes, signal generators, power supplies, and logic analyzers. • Experience with test automation and scripting for test execution and data collection. Systems Thinking & Communication: • Strong analytical and troubleshooting skills across hardware and software domains. • Effective verbal and written communication for technical documentation and collaboration. • Comfortable working in cross-functional environments and under time-sensitive conditions. Technical Systems Proficiency Familiarity with scripting languages such as Python, MATLAB, or LabVIEW. • Understanding of test management and configuration tools. • Working knowledge of tools such as Atlassian JIRA/Confluence, SAP, and Microsoft Office 365. Travel Required Up to 15% (domestic/international) Eligibility U.S. Citizenship required Clearance Ability to obtain and maintain a Government security clearance Physical Requirements Carrying: able to carry documents and/or electronic equipment up to 20lbs/9kg. Lifting: able to lift documents and/or electronic equipment up to 20lbs/9kg. Pushing/Pulling: able to push/pull items in office areas. Sitting: able to sit for extended periods of time at computer and in meetings. Squatting/Kneeling: able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Standing: able to stand for extended periods of time. Travel: able to travel independently and at short notice. Walking: able to walk through office and production areas including uneven surfaces. Equal Opportunity: Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status, or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits, and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your resume or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation, or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ***************. **************** Job Posted by ApplicantPro

Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards, procedures, code and shall exercise judgment in their application with minimal to no supervision. Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them. Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them. Individuals may occasionally supervise subordinate personnel or assist other engineers or designers. Qualifications: A Bachelor of Science degree in Electrical Engineering, minimum 8 years of work experience and shall be a licensed engineer (PE). Responsibilities: Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards, procedures, code and shall exercise judgment in their application with minimal to no supervision. Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them. Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them. Individuals may occasionally supervise subordinate personnel or assist other engineers or designers. Knowledge of discipline specific codes and other building codes. Possess excellent verbal and written communication skills. Good leadership skills to educate client on design and other project requirements. Meet with the Project Engineer and the Project Manager to discuss the design scope, schedule, budget, phasing, site issues, and design review issues. Work with Project Manager and Project Engineer to prepare design budgets and schedules. Estimate discipline man-hours required to complete the design requirements of a project. Provide leadership and assign design job functions to designated designers and supervise their efforts in completing the project on time and within budget. Implement system types as selected by the Project Engineer and provide complete. construction documents that match the client and project team's requirements. Review preliminary and final engineering design with other disciplines for function, clearances, coordination, and final design selection. Perform a final review of the engineering drawings. Client contact. Perform quality assurance on projects in coordination with technical manager or project engineer. Mentor and motivate Engineering designers I, II and III. Set high standards, Professional integrity and seeks for the company and client best interest. Ability to meet fast-paced deadlines while maintaining quality design. Additional duties as required. Skills: Active Listening Critical Thinking Proficient in REVIT Proficient in Engineering Modeling tools Researching and writing reports/opinions. Excellent written and oral communication. Proficient in Microsoft Office tools Excellent Time Management Equipment selection Excellent judgement and decision making Excellent management of personnel resources - Motivating, developing and directing team members. Join us and enjoy the CP Perks: Superior Benefit Packages for the whole family and of course the pets too! Generous 401(K) company match - show me the money!! Generous PTO - vaca time! Casual “uncorporate” working environment - Jeans and Hey Dudes!! Employee Entertainment Benefits Discount Program. License renewals 100% paid by company. Professional membership renewals 100% paid by company. Continuing education lunch-n-learns, and industry convention attendance encouraged! Sign on bonus'. Relocation available. Tuition Reimbursement Program. Company sponsored charity events to participate in! Our Licensing Specialist loves to deal with the licensing boards and handles all the tedious forms, so you won't have too! Fully staffed Permitting department - they know how to deal with the jurisdictions! Highly skilled Designers in our Design Department - they love turning ideas into reality! Various sectors of business to include - Grocery, Retail, Big Box, Power Centers, Senior Living, Restaurant, Industrial, Multi-family, Convenience - We love bringing communities to life! We have experts in MEP, Fire Protection and Structural who tackle the technical issues! Neither snow nor rain nor heat, nor gloom of night keeps our CA department from their appointed surveys! Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job at any time. Additionally, this job description reflects management's assignment of essential functions. It does not prescribe or restrict the tasks that may be assigned. Requirements are subject to possible modification to reasonably accommodate individuals with disabilities. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship between the employee and Cuhaci & Peterson Architects, Engineers & Planners, Inc.

Job Description Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Staff Electrical Hardware Engineer to our team. If you enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for leading the design and development of board-level high-speed digital electronics, including products based on processors, FPGAs, and GPUs, through all phases of the development process. Projects will include software-defined radios, single-board computers, digital architectures for communication systems, and hardware products for artificial intelligence and machine learning. As a Staff Engineer you will be responsible for leading hardware product design from initial concept through requirements definition, architecture definition, part selection, detailed design, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Hardware design tasks will include roadmap planning, block diagrams, schematics, PCB layout and routing, analyses (e.g. signal integrity, failure method), testing, and qualification. As a Staff Engineer, a significant scope of your role will be to serve as a technical and professional mentor for the Hardware team. You will also be expected to scrutinize circuit-level electrical designs and provide feedback to design engineers. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required. This role will initially be remote, with a planned transition to in-person work once our Florida office is established.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS A Bachelor of Science (BS), Master of Science (MS) or Doctorate (PhD) degree in Electrical Engineering or Computer Engineering from an accredited university. 14 years of industry experience in high-speed digital electronics design, analysis, and testing. Extensive experience independently designing high-speed digital, analog, and mixed-signal hardware products from concept through schematic, layout, manufacturing, test, and deployment. Experience designing high-speed digital hardware system architectures. Expert-level proficiency in electronics design (EDA) tools such as Altium. Expert-level proficiency in high-speed digital PCB layout. Expertise in board-level signal integrity simulation tools. Expertise in high-reliability design for space applications Extensive hands-on experience with lab instruments such as oscilloscopes, , logic analyzers, waveform generators, etc. Demonstrated skill in coaching, mentoring and developing technical skills with staff Excellent written and verbal communication skills. PREFERRED EXPERIENCE Worst-case circuit analysis, failure method and criticality analyses, and reliability analysis. Programming (C/C++, Python, MATLAB, etc.). EMI/EMC design and mitigation techniques. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Electrical Project Engineer - Licensed | Technical Lead | Revit Proficiency Compensation: Competitive Salary + Bonus + Relocation + Comprehensive Benefits Seniority Level: Senior | PE Required Industry: MEP Engineering | Building Systems | Commercial & Retail Development About the Role: A multidisciplinary design and engineering firm is seeking a licensed Electrical Project Engineer to lead electrical design efforts across retail, industrial, multifamily, senior living, and commercial development projects. You'll drive systems design, mentor junior staff, and collaborate cross-functionally to deliver technical excellence - on time and on budget. This is a high-impact role suited for someone who thrives in a fast-paced, team-first environment and knows how to deliver quality work with autonomy. What You'll Do: Design power distribution and lighting systems in accordance with building codes and client specs Perform engineering calculations, load analysis, and equipment selection (DX, switchgear, panels, etc.) Lead project coordination across disciplines - structural, mechanical, fire protection, permitting Provide redlines, construction documents, and QA/QC oversight Estimate hours, assist with staffing and project scheduling Supervise and mentor designers and junior engineers Coordinate directly with clients and serve as technical point of contact Participate in project review meetings and support proposal development as needed Ensure technical accuracy, design clarity, and internal QA compliance across all documents What You Bring: Bachelor's Degree in Electrical Engineering (BS or BSEE) Minimum 8 years of experience in electrical systems design PE license required Strong command of electrical codes and discipline-specific standards Proficiency in Revit, AutoCAD, and engineering modeling tools Ability to manage and prioritize multiple projects independently Excellent written, verbal, and interpersonal communication skills Strong leadership, time management, and mentoring skills Why Join: Competitive compensation with relocation and sign-on bonus available 100% paid licensing and professional memberships Generous 401(k) match, PTO, tuition reimbursement, and pet-friendly benefits Casual, team-first culture with growth opportunities across MEP, structural, and fire protection disciplines Access to a fully staffed permitting and licensing team - so you can focus on engineering Design-first culture with exciting work in retail, restaurant, industrial, grocery, multifamily, and more

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. Summary As an Electrical Engineering Intern, you'll join AV's Test Equipment Engineering Team and contribute to the design, development, and testing of electrical systems for unmanned aircraft and advanced robotics. You'll assist in building and supporting test equipment, writing software, and troubleshooting systems - gaining valuable, real-world experience across the product development lifecycle. This is an exciting opportunity to apply your academic training in a high-tech, fast-paced environment while working alongside experienced engineers and mentors. Position Responsibilities * Assist in the design, development, and troubleshooting of test equipment for printed circuit board assemblies (PCBAs), subsystems, and full systems * Help develop and deploy test software to support hardware integration and validation * Support the maintenance and upgrade of test systems used during production * Participate in test plan creation, requirements documentation, and validation strategies * Assist in executing tests on power systems, avionics, and propulsion components (functional, performance, and environmental) * Learn and apply engineering best practices, processes, and documentation standards * Support hardware bring-up, test station calibration, and system verification * Work collaboratively with cross-functional teams including hardware, software, and systems engineers * Perform other related duties as assigned to support ongoing engineering efforts Basic Qualifications (Required Skills & Experience) * Currently pursuing a Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field * Academic or personal project experience in one or more of the following: * Power electronics, battery systems, or electric motors * Embedded systems, FPGA, or RF systems * Digital and analog circuit design * Familiarity with electrical protocols such as I2C, SPI, UART, USB, CAN, or LVDS * Basic programming knowledge in C, C++, or C# * Exposure to test equipment like oscilloscopes, multimeters, and power supplies * Strong analytical and troubleshooting skills * Effective communication skills and ability to work well in a team Preferred Qualifications & Competencies * Hands-on experience with PCB testing, debugging, or electronics prototyping * Exposure to Visual Studio, Git, or hardware/software integration environments * Familiarity with version control and defect tracking tools * Experience with scripting or automation for test procedures (e.g., Python) * Passion for aerospace, robotics, or defense-related systems * Demonstrated initiative, accountability, and a willingness to learn * Ability to manage time effectively and adapt in a fast-paced, team-oriented environment Physical Demands * Ability to work in an office and light manufacturing/test environment (Constant) * Required to sit, stand, and use computer equipment for extended periods (Frequent) * May be required to lift and carry up to 10 lbs. (Occasional) ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is seeking an Associate Engineer Electronics/Engineer Electronics. This position will be located at our Aeronautics Sector in Melbourne, FL. The qualified candidate will become part of Northrop Grumman's Avionics Integration organization. The selected candidate will be expected to research, design, develop, and test a variety of electronic equipment and systems, including: Radar and radiation detection equipment Radio, television and other communications equipment and systems Circuitry components Analog and digital computers Control and test equipment This requisition may be filled at either an Associate Engineer Electronics (T01) or Engineer Electronics (T02). Basic Qualifications for an Associate Engineer Electronics (T01) A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Bachelor's degree from an accredited institution by August 2026. Be majoring in or having majored in Electrical Engineering, Computer Engineering, or similar STEM degree. Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special access within a reasonable period of time, as determined by the company to meet its business needs (U.S. citizenship is a pre-requisite). Final approved U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special Access may be required to start. Basic Qualifications for an Engineer Electronics (T02) A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Master's degree from an accredited institution by August 2026. Be majoring in or having majored in Electrical Engineering, Computer Engineering, or similar STEM degree. Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special access within a reasonable period of time, as determined by the company to meet its business needs (U.S. citizenship is a pre-requisite). Final approved U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special Access may be required to start. Preferred Qualifications Have an overall cumulative GPA of 3.25/4.0 or higher Previous internship/co-op or other work experience, leadership & teamwork capabilities, interpersonal communication skills, and activities (professional/community/extracurricular) Pay Range Associate Engineer Electronics (T01): $63,900 - $95,900 Engineer Electronics (T02): $77,200 - $115,800 Campusjobs Primary Level Salary Range: $63,900.00 - $95,900.00Secondary Level Salary Range: $77,200.00 - $115,800.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job DescriptionElectrical Engineering Intern - Electric Power Software and Modelling Florida Municipal Power Agency (FMPA) is a wholesale power agency owned by municipal electric utilities in Florida. FMPA's mission is to provide power that is low-cost, reliable and clean, as well as provide value-added services for its owner-customers. FMPA is looking for a qualified student to be part of our Engineering Services Department working on a variety of assignments related to modeling, mapping and power system analysis for electrical systems at FMPA's electric power plants as well as electric distribution systems of FMPA's member utilities. Position Status Full Time for Spring 2026 Job Overview The selected student would be responsible for updating or creating one line and three line diagrams in AutoCAD. Settings review in ETAP PowerStation (modeling of large electric power plants). Produce bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. No experience in these software platforms is required. FMPA Engineers and Member Services staff will provide oversight, guidance and the necessary training in the use of the software platforms. Other assignments will be in related fields as agreed and as time allows. This is an excellent opportunity for students to learn about real apparatus and design conventions applied at electric power plants and in electric utility distribution systems in the field while gaining experience using widely adopted electric power industry software platforms. Required Program of Study Electrical Engineering / Computer Engineering preferred. Other Engineering programs of study may be considered if sufficient electric circuits and Power System coursework has been performed. Required Skills Familiarity with Word and Excel Solid verbal and written communications skills Organized and task-oriented Experience with AutoCAD is valuable but not required Understand power system theory - 3-phase vector math, power factor, symmetrical components Class Standing Junior or Senior preferred. Sophomores may be considered with appreciable completed coursework.

Benefits: Bonus based on performance Competitive salary Free uniforms Opportunity for advancement Paid time off Training & development We are seeking a skilled and licensed Electrical Engineer to join our team. The ideal candidate will have a minimum of 2 years of experience in the field, with strong skills in estimating and proficiency in AutoCAD. This role requires 65% ability to travel in the state of Florida, a clear driving record, and the ability to pass a background check. Key Responsibilities: Design electrical systems.Prepare and review electrical designs, drawings, and specifications using AutoCAD.Estimate project costs and prepare detailed proposals.Conduct site inspections and ensure compliance with safety standards and regulations.Collaborate with project managers, contractors, and clients to ensure successful project completion.Troubleshoot and resolve electrical issues in a timely manner.Maintain accurate records and documentation of all electrical work. Qualifications: Licensed Electrical Engineer.Minimum of 2 years of experience in the electrical engineering field.Proficiency in AutoCAD and other relevant design software.Strong estimating skills and experience preparing project proposals.Excellent problem-solving abilities and attention to detail.Clear driving record.Ability to pass a background check.Strong communication and interpersonal skills.Bilingual Prefer (English - Spanish) Compensation: $56,000.00 - $80,000.00 per year JL ELECTRICAL specializes in industrial, commercial, and residential services. Whether you need a small wiring fix or the installation of state-of-the-art smart home, we get the job done right.

As a Senior Electrical Engineer, you will be responsible for designing state-of-the-art products for the utility inspection market, utilizing embedded vision system to create cutting edge complex designs. The Senior Electrical Engineer will design, debug, and test prototype components and circuit card assemblies while working in a cross-functional organization. Product designs involve the combination of motor control, analog, digital and High-Speed design. Senior Engineers may also provide work direction to other engineers, lead project teams, lead engineering wide process improvements, write standards as a subject matter expert and be a product owner. The Senior Electrical Engineer role involves occasional travel and requires the ability to work within commercial and scientific teams. The Senior Electrical Engineer must be capable of high-level, project-oriented system design and analysis. The role requires the ability to take ownership of and be responsible for many simultaneous system deliverables. This includes project planning, design, implementation, testing, documentation, validation and support. He/she must be a graduate in an applicable field with significant industry experience or equivalent. Job Responsibilities: Design and Development: + Design and layout complex circuitry containing brushed and brushless (BLDC) motor controls. + Designs complex electronic circuits, subsystems, systems, and products. + Layout circuits and systems vary in complexity: may include analog, digital, microprocessor, high voltage/power circuitry, and motor control circuitry at both the schematic capture and PCB layout stages of development. + Writes test plans and performs evaluation testing during the design process. These electronic components may interface with mechanical components. Technical Support and Analysis: Provides technical support for existing products, including quality assessment, failure analysis, and product improvement activities. Project Management and Leadership: + Provides technical guidance, serves as a point of contact or business liaison, prepares briefings for Senior management, and assists in problem resolution specific to the program/project. + Assists in the review and approval of subcontractor plans, including specifications and objectives, work breakdown structure, detailed scope descriptions and schedules, risk management, milestone descriptions, budgets and staffing decisions. + Participates in project teams and all activities related to the development of new products, and support of existing products. + Leads project teams and provides work direction to other engineers. + Leads engineering-wide process improvements. + Lead NPI/NPD evolution of systems and products. + Acts as a product owner and writes standards as a subject matter expert. Documentation and Reporting: + Writes manufacturing and test procedures and reports. + Participates in project teams and activities related to product development and support. + Provides technical support to sales and marketing for bids and proposals. Skills Circuit design, Firmware, PCB Layout, circuit simulation, Electronics, Pcb, Hardware, Digital, Altium, Schematic, Microcontroller, USB, Ethernet, FPGA Top Skills Details Circuit design,Firmware,PCB Layout,circuit simulation,Electronics,Pcb Additional Skills & Qualifications Experience in any of the following would add weight to a candidate's consideration: · Familiarity with Data Analysis Tools (Matlab, Mathcad) · Knowledgeable of grounding, noise mitigation, EMI reduction techniques · Experience with designing for CE, FCC, TUV, UKCA and other certifying bodies · Experience with designing for manufacturability and serviceability · General Engineering o Design and layout of multilayer SMD/thru-hole mixed signal PCBs Up to 8 layers using Altuim Designer or equivalent. o Hand soldering and rework to troubleshoot and augmentation/prototyping of designs. o Power Supply design to support analog & digital circuitry and experience with low noise & moderate bandwidth PCB layout & implementation o Experience with single and multi-element optical detectors (i.e. Photodiodes, CMOS detectors, and CCD's) and their readout circuits is a plus o Experience with Camera vision systems is a major plus o Familiarity with optical sources (lamps, lasers, LEDs, etc.) and their drive circuits a plus · Digital Design o Detailed knowledge on digital MEMS sensors such as IMU, INU, Temp, pressure, humidity sensors. o Design products that will use industry standard data interfaces such as: USB 3.x, 2.0, Bluetooth (including BLE), WiFi, Ethernet (100/1000BASE-T), RS-232/485, I2C and SPI. o Design experience in motion control of DC brushed/brushless/ and stepper motors is a plus o Experience in ARM PCB layout and design is a plus o Experience in High speed Board layout is a plus o Embedded programming experience in up to 32 bit microcontrollers, Freescale processors knowledge is a plus o Competency creating test code in micro-controller/DSP firmware in C/C++ o FPGA design, simulation, synthesis & implementation in VHDL is a plus o Interfacing FPGA to standard peripherals and microcontrollers is a plus · Analog Design o Analog Front End devices for input signal processing, low noise analog signal processing devices Experience Level Expert Level Job Type & Location This is a Contract position based out of Orlando, FL. Pay and Benefits The pay range for this position is $50.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Orlando,FL. Application Deadline This position is anticipated to close on Dec 29, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman is seeking an Associate Engineer Electronics/Engineer Electronics. This position will be located at our Aeronautics Sector in Melbourne, FL. The qualified candidate will become part of Northrop Grumman's Avionics Integration organization. The selected candidate will be expected to research, design, develop, and test a variety of electronic equipment and systems, including: Radar and radiation detection equipment Radio, television and other communications equipment and systems Circuitry components Analog and digital computers Control and test equipment This requisition may be filled at either an Associate Engineer Electronics (T01) or Engineer Electronics (T02) Basic Qualifications for an Associate Engineer Electronics (T01) A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Bachelor's degree from an accredited institution by August 2026. Be majoring in or having majored in Electrical Engineering, Computer Engineering, or similar STEM degree. Your ability to obtain and/or transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Basic Qualifications for an Engineer Electronics (T02) A candidate, regardless of age and hiring source, must meet ALL of the below criteria. The candidate must: Be completing or has completed their Master's degree from an accredited institution by August 2026. Be majoring in or having majored in Electrical Engineering, Computer Engineering, or similar STEM degree. Your ability to obtain and/or transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Preferred Qualifications Have an overall cumulative GPA of 3.25/4.0 or higher Previous internship/co-op or other work experience, leadership & teamwork capabilities, interpersonal communication skills, and activities (professional/community/extracurricular) Pay Range Associate Engineer Electronics (T01): $63,900 - $95,900 Engineer Electronics (T02): $77,200 - $115,800 Campusjobs #AS-FA3 Primary Level Salary Range: $63,900.00 - $95,900.00Secondary Level Salary Range: $77,200.00 - $115,800.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Electrical Engineering Intern - Electric Power Software and Modelling Florida Municipal Power Agency (FMPA) is a wholesale power agency owned by municipal electric utilities in Florida. FMPA's mission is to provide power that is low-cost, reliable and clean, as well as provide value-added services for its owner-customers. FMPA is looking for a qualified student to be part of our Engineering Services Department working on a variety of assignments related to modeling, mapping and power system analysis for electrical systems at FMPA's electric power plants as well as electric distribution systems of FMPA's member utilities. Position Status Full Time for Spring 2026 Job Overview The selected student would be responsible for updating or creating one line and three line diagrams in AutoCAD. Settings review in ETAP PowerStation (modeling of large electric power plants). Produce bid documents consisting of layout drawings, one-line, riser, schedules, details, and specifications. No experience in these software platforms is required. FMPA Engineers and Member Services staff will provide oversight, guidance and the necessary training in the use of the software platforms. Other assignments will be in related fields as agreed and as time allows. This is an excellent opportunity for students to learn about real apparatus and design conventions applied at electric power plants and in electric utility distribution systems in the field while gaining experience using widely adopted electric power industry software platforms. Required Program of Study Electrical Engineering / Computer Engineering preferred. Other Engineering programs of study may be considered if sufficient electric circuits and Power System coursework has been performed. Required Skills Familiarity with Word and Excel Solid verbal and written communications skills Organized and task-oriented Experience with AutoCAD is valuable but not required Understand power system theory - 3-phase vector math, power factor, symmetrical components Class Standing Junior or Senior preferred. Sophomores may be considered with appreciable completed coursework.