Electrical engineer internship jobs in Mansfield, CT

Job Description At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview As an Electrical Engineering Intern at REGENT, you will work at the intersection of the systems that power, move, and control our seagliders. This multidisciplinary role is primarily focused on electrical engineering, with direct exposure to propulsion and actuation systems that push the boundaries of high-performance maritime aviation. You'll support the design, integration, and testing of critical vehicle subsystems-from high-voltage distribution to electromechanical actuators to power-dense propulsion hardware. If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do As an intern in this role, you may: Electrical Systems Support design, layout, and documentation for HV/LV power distribution and signal networks Develop and test custom PCBs for sensing, control, and actuation Build, route, and validate wire harnesses across electrical, propulsion, and actuation subsystems Create and maintain schematics, harness drawings, and test documentation Propulsion & Actuation Assist with the electrical integration of propulsion and actuation systems Support testing of motors, actuators, and power electronics with a focus on instrumentation and safety Troubleshoot hardware issues on benches, in the lab, and on the vehicle Simulation, Testing & Tools Use modeling/analysis tools (MATLAB/Simulink, LabVIEW, etc.) to evaluate system performance Build and improve test setups, benches, and automated test equipment Capture and analyze data to support subsystem validation What You'll Bring Currently pursuing a degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or similar Experience with electronics lab tools (oscilloscope, power supplies, DMMs, loads, soldering tools) Understanding of digital, analog, or power electronics fundamentals Ability to interpret electrical schematics and/or mechanical drawings Interest in multidisciplinary engineering across electrical, mechanical, and control systems Bonus Experience Experience with motors, actuators, sensors, or motor controllers Familiarity with Python, MATLAB, or similar tools Exposure to PCB design tools (Altium, KiCad, Eagle) Comfort with high-voltage or high-power systems Who We're Looking For Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer Competitive compensation Housing Stipend available for those temporarily moving to join our team Daily, free catered lunches Learning & professional development opportunities Meaningful projects that make an impact Mentorship & guidance from experienced team members If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

At a Glance Legrand has an exciting opportunity for an Electrical Engineering Intern to join the Electrical Wiring Systems Team in West Hartford, CT. In this role, the Electrical Engineering Intern will be responsible for assisting the Product Development Team in development and analysis of simple electronic designs and documentation. Functions include working with Design Engineers, Electrical Engineers, and Engineering Managers on assignments that support proof of concept designs, testing of products, maintenance of products, customer related issues and general electrical engineering challenges. Main Job Duties: • Design, build, analyze, and troubleshoot electrical components, sub-assemblies and products • Modeling and documenting design elements for engineering solutions • Creating testing environments for products, conducting the tests and documenting results • Reviewing product standards and updating as required • Working on manufacturing floor to solve design related issues Qualifications Education: • Currently enrolled in, or recently, completed BS Electrical Engineering • College Junior or higher preferred Skills/Knowledge/Abilities: • Creative approach to problem solving based on solid theoretical engineering skill. • Hands on experience on electrical lab tools such as oscilloscope, power supplies, function generation, etc. is preferred. • Breadboard & prototype PCB design experience is expected • Good theoretical background on transformer, AC system, and power electronics is a plus • Willing to provide engineering support required to sustain current product offering as well as evaluate new product designs. This includes performing product testing in the laboratory. • Understanding of electronic theories and electronic circuit design principles (digital, analog, mixed signal, power, high-speed, low-noise circuits and requirements) • Understanding of good EMC circuit design principles • Proficient with Microsoft Word, Excel. • Strong written and verbal communication skills. • Must have an acceptable level of interpersonal skills to work effectively in a team environment. • Must be able to contribute to several projects at a time. • Prepare written and verbal reports. • Conduct engineering studies/investigations. Company Info About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit *********************** About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Electrical Wiring Systems Division Legrand's Electrical Wiring Systems (EWS) division provides the most complete line of residential, commercial, and industrial electrical wiring devices in the world. Through commitment to innovation and quality, EWS maintains the position of industry leader in wire and cable management and wiring devices categories, specializing in raceways, flexible floor, open space and outdoor power solutions, wire mesh cable trays and systems, and designer switches and outlets. With this comprehensive offering, EWS serves a range of exciting vertical markets, including commercial office and commercial interior, data centers, education, healthcare, hospitality, manufacturing, mixed-use developments and residential. For more information, visit legrand.us/electrical wiring devices ********************* ******************************** ************************************* ************************** NA Equal Opportunity Employer

At Rimkus, our Built Environment Solutions team operates on a global scale with the advantage of local expertise. Our licensed engineers, architects, and technical specialists bring deep knowledge of regional requirements and industry best practices, enabling us to deliver customized, high-quality solutions that maximize the success of our clients' investments. With a comprehensive portfolio that spans nearly every engineering and architectural discipline, we help organizations plan, build, and manage assets with confidence. What sets us apart is our forward-thinking approach. We integrate carbon footprint reduction, resiliency, maintainability, and long-term sustainability into everything we do helping clients not just meet today's needs but prepare for tomorrow's challenges. From design and pre-construction through construction, closeout, and ongoing operations, we provide tailored support at every stage. By identifying potential issues before they arise, we mitigate risks, extend asset life, and reduce costly unplanned repairs. Whether an asset is newly constructed, leased, or purchased, our innovative solutions empower clients to operate more efficiently and sustainably. Joining Rimkus means being part of a team that's shaping the future of the built environment-one smart, resilient solution at a time. OVERVIEW The Electrical Design Engineer is experienced in the design of electrical and fire systems for the commercial real estate development industry. In this role, you will work with a team of engineers designing electrical and fire alarm systems for commercial, institutional, industrial, and multi-unit residential facilities. The salary range for this position is $130,000.00 - $150,000.00 and is dependent on education, experience, location, and certifications/licensure. ESSENTIAL JOB FUNCTIONS: * Applies technical knowledge to design solutions for complex and unique problems. * Electrical system design for distribution, power, fire alarm, and lighting for commercial and residential projects. * Manages multiple projects. * Uses many different equations, applications, and figures to ensure the proper procedure application, including electrical load and short circuit calculations * Perform existing conditions as-built documentation. * Coordinate with mechanical and plumbing engineers on projects. * Perform system evaluation and report generation. * Review submittals and perform final inspections on installations. * Ability to initiate, develop, and maintain mutually beneficial client relationships. * Understands and applies the National Electrical Code, NFPA 72, and MA State Building and Energy codes. * Coordination with other engineering team members. REQUIRED EXPERIENCE, EDUCATION, and CERTIFICATIONS: * B.S. Electrical Engineering degree or higher. * P.E. Preferred but not required (must be able to obtain). * Minimum of 10 years of experience in a similar/relevant position. * Electrical and fire systems design. * AutoCAD MEP and Revit experience strongly desired. * Familiar with the National Electrical Code, NFPA 72, and MA state building and energy codes. REQUIRED SKILLS AND ABILITIES: * The employee must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in deposition or trial. Clear vision and depth perception are also necessary. * Working knowledge of AutoCAD, Revit, Outlook, Word, and Excel. * Knowledge of electrical systems and designs for commercial, retail, and high-rise residential buildings. * Experience coordinating with disciplines internally as well as externally with consultants/architects. * Experience conducting and attending site visits, as well as preparing site reports. PHYSICAL DEMANDS, OVERTIME, and TRAVEL * Physical Demands - Work will be performed both in an office setting and at outside locations (i.e., client's office, industrial, construction, and/or residential sites). The employee is frequently required to stand, sit, climb ladders, bend, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. Employees may lift and/or move up to 50 pounds. Employees must be sharp, focused, and alert when conducting site inspections, speaking, and interacting with clients, as well as preparing drawings and written reports. Clear vision and depth perception are also necessary. * Overtime - This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with one hour for lunch. There will be periods where overtime will be required, which the employee will need to comply with in order to meet the demands of the position. * Travel Requirements - This position requires up to 25% travel. Some out-of-area and overnight travel may be required. Additional Information: NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a complete benefits package that includes medical, dental, vision, life, disability, employer-matching 401(k), and opportunities for advancement! (*************** At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-AL1 #LI-HYBRID

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: * The Test Engineer is responsible for the development, integration, sustainment, and continuous improvement of specialized Electrical, ESS (Environmental Stress Screening), and RF test equipment as indicated by customer or internal specifications * Work within multi-disciplinary team environment and support proposal efforts and technical reviews * Position reports to the Test Engineering Manager Duties and Responsibilities: * Prepare test plans and procedures from Customer and/or Engineering specifications * Program, set-up, and operate various Electrical, ESS, and RF Test equipment using customer supplied data * Direct electrical analysis of test requirements for digital, analog, mixed signal, RF, and power circuits * Visually inspect electronic assemblies using various inspection equipment (Microscope, calipers, X-Ray equipment) for conformance to customer, IPC guideline specifications, and any written procedures * Develop specialized test solutions, tooling, and fixtures to customer requirements * Design complex test or test fixture circuitry to support automated testing by applying knowledge and principles of electronic theory, testing methodology, and electronic engineering * Perform and/or coordinate preventative maintenance on associated test equipment * Identify, develop, qualify, and implement new test processes/equipment through DOE & capability testing * Provide technical and analytical support to customers and operators regarding product quality and the testing process * Troubleshoot functional test failures and work with process engineering team on root cause corrective action investigations Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Ability to read and interpret schematics, electrical diagrams, and blueprints * Understand basic forms of digital and analog circuitry; read, interpret, and apply technical information/specifications * Must be able to create detailed product test procedures * Ability to troubleshoot basic analog electronics circuitry using a DMM * Excellent analytical and problem solving skills * Must have good hands on mechanical and engineering skills * Demonstrated ability to prioritize and manage multiple simultaneous projects * Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required; eye exam is required annually * Due to ITAR requirements, applicants must be a U.S. Citizen or Permanent Resident Education and Experience: Education: * Bachelor of Science (BS) in Engineering, Electrical Engineering preferred Preferred Experience: * The ability to obtain and maintain a U.S. government issued security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. * 2+ years of engineering/technical related experience, focused on test processes * Previous printed circuit board and/or RF experience * Proficient in the utilization of a variety of test equipment, including: Oscilloscopes, DMM's, Power Meters, Spectrum Analyzers, RF Signal Generators, Component Analyzers, RF Network Analyzers, and Noise Generators #LI-PG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: The Test Engineer is responsible for the development, integration, sustainment, and continuous improvement of specialized Electrical, ESS (Environmental Stress Screening), and RF test equipment as indicated by customer or internal specifications Work within multi-disciplinary team environment and support proposal efforts and technical reviews Position reports to the Test Engineering Manager Duties and Responsibilities: Prepare test plans and procedures from Customer and/or Engineering specifications Program, set-up, and operate various Electrical, ESS, and RF Test equipment using customer supplied data Direct electrical analysis of test requirements for digital, analog, mixed signal, RF, and power circuits Visually inspect electronic assemblies using various inspection equipment (Microscope, calipers, X-Ray equipment) for conformance to customer, IPC guideline specifications, and any written procedures Develop specialized test solutions, tooling, and fixtures to customer requirements Design complex test or test fixture circuitry to support automated testing by applying knowledge and principles of electronic theory, testing methodology, and electronic engineering Perform and/or coordinate preventative maintenance on associated test equipment Identify, develop, qualify, and implement new test processes/equipment through DOE & capability testing Provide technical and analytical support to customers and operators regarding product quality and the testing process Troubleshoot functional test failures and work with process engineering team on root cause corrective action investigations Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: Ability to read and interpret schematics, electrical diagrams, and blueprints Understand basic forms of digital and analog circuitry; read, interpret, and apply technical information/specifications Must be able to create detailed product test procedures Ability to troubleshoot basic analog electronics circuitry using a DMM Excellent analytical and problem solving skills Must have good hands on mechanical and engineering skills Demonstrated ability to prioritize and manage multiple simultaneous projects Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required; eye exam is required annually Due to ITAR requirements, applicants must be a U.S. Citizen or Permanent Resident Education and Experience: Education: Bachelor of Science (BS) in Engineering, Electrical Engineering preferred Preferred Experience: The ability to obtain and maintain a U.S. government issued security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. 2+ years of engineering/technical related experience, focused on test processes Previous printed circuit board and/or RF experience Proficient in the utilization of a variety of test equipment, including: Oscilloscopes, DMM's, Power Meters, Spectrum Analyzers, RF Signal Generators, Component Analyzers, RF Network Analyzers, and Noise Generators #LI-PG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution facility upgrades to large transmission projects. This position can influence the future of the resiliency, reliability, and economic operation of the electric grid. Principal responsibilities include the design of high voltage (13kV-500kV) electrical substations. Areas of design and responsibilities include leading and executing the following: Preparation of proposals and scope development, including conceptual designs and execution plans. Prepare engineering cost and labor estimates and schedules. Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material. Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring. Preparing calculations and reports for engineering studies. (grounding, lightning protection, AC/DC load studies, etc.) Preparing equipment specifications for procurement and/or factory acceptance testing. Coordinating design activities with other departments. (Civil/Structural, Networks, Transmission Line, others.) Providing guidance and mentoring to less experienced team members. Regularly meeting with and corresponding with clients or outside personnel. Performing quality reviews for other engineers and designers. Providing short term field support during construction. Supporting business development and marketing initiatives. Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement. Performing other duties as assigned. Qualifications Bachelor's Degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience required. Consulting experience preferred. Bachelor's Degree in Electrical or related Engineering Technology from an ABET-accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience required. Consulting experience preferred. Master's Degree in Electrical Engineering and 2 years of electrical engineering experience required. Consulting experience preferred. Strong knowledge in standard engineering techniques and procedures. Excellent written and verbal communication skills. Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. Proficient in standard engineering techniques and procedures. Strong computer skills (e.g. Microsoft Office Suite) Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. Engineers in Training-EIT Certification preferred EEO/Disabled/Veterans Primary Location : US-CT-Wallingford Other Locations : US-MA-Newton, US-PA-Conshohocken, US-NJ-Morristown Travel : Yes, 25 % of the Time Kodi Miller (Miss) Talent Scout AKP Recruiting kodi@akprecruiting.com www.akprecruiting.com Josh May President AKP Recruiting (406) 633-1654 josh@akprecruiting.com www.akprecruiting.com

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution facility upgrades to large transmission projects. This position can influence the future of the resiliency, reliability, and economic operation of the electric grid. Principal responsibilities include the design of high voltage (13kV-500kV) electrical substations. Areas of design and responsibilities include leading and executing the following: Preparation of proposals and scope development, including conceptual designs and execution plans. Prepare engineering cost and labor estimates and schedules. Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material. Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring. Preparing calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.) Preparing equipment specifications for procurement and/or factory acceptance testing Coordinating design activities with other departments (Civil/Structural, Networks, Transmission Line, others.) Providing guidance and mentoring to less experienced team members. Regularly meeting with and corresponding with clients or outside personnel. Performing quality reviews for other engineers and designers. Providing short term field support during construction. Supporting business development and marketing initiatives. Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement. Performing other duties as assigned. Qualifications Bachelor's degree in Electrical Engineering from accredited program Minimum 3 years related experience (completion of master's degree in related field may be substituted for one year of experience) Completion of FE exam strongly preferred. Proficiency with National Electrical Safety Code and IEEE / ANSI Standards Strong preference for those with: Excellent written & verbal communication skills Strong analytical and problem-solving skills Capability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria.

We are seeking a highly skilled and motivated Electrical Power Systems Engineer to join our dynamic team. In this role, you will be responsible for the design, analysis, and optimization of power systems, focusing on both AC and DC distribution systems. You will work with a variety of electrical components including motors, generators, and switchgear, as well as contribute to modeling and simulation efforts. This position offers the opportunity to work on cutting-edge technologies within a collaborative engineering environment. Key Responsibilities and Required Qualifications: Perform detailed propulsion power system analysis, including fault and system stability studies for AC and DC power distribution systems. Modeling and design experience propulsion power plant components including turbine generators and power conversion modules Work on the design, implementation, and optimization of electric motors and generators. Utilize MATLAB and Simulink for data processing, model development, and system simulation. Develop and implement power system solutions, including protective relaying, switchboards and circuit breakers Collaborate with other engineering teams to ensure compliance with technical specifications and project requirements. Qualifications Required Bachelor of Science degree in Electrical Engineering. 5-9 years of experience in electrical power systems engineering, with specific expertise in DC and AC power systems. Skills Team Collaboration and Communication: Ability to work effectively in cross-functional teams, collaborating with electrical, mechanical, and software engineers Analytical and Problem-Solving Skills: Exceptional ability to analyze complex power systems and identify innovative solutions to challenging engineering problems. Technical Documentation: Expertise in creating and maintaining detailed technical documentation, including system specifications, engineering reports, and design manuals. Attention to Detail: Precision in performing simulations, conducting analyses, and ensuring all designs meet performance and safety standards. Quality Assurance and Compliance: Familiarity with industry standards and best practices, ensuring all designs, analyses, and systems meet required quality, safety, and regulatory standards. Software Proficiency: Strong working knowledge of MATLAB and Simulink for modeling, simulation, and system analysis. Adaptability and Continuous Learning: Willingness to stay up-to-date with the latest advancements in power systems engineering and emerging technologies. Ability to adapt quickly to new tools, systems, and methodologies in a fast-paced, evolving field. Customer-Focused Mindset: Demonstrated ability to understand and respond to customer needs and provide tailored solutions that meet both technical and business objectives. We can recommend jobs specifically for you! Click here to get started.

Employment Type: Full-Time, In-person Timing: Immediate This position entails the electrical project support of multi-million-dollar power generation facilities or other types of industrial projects. The candidate will be required to: provide electrical power and control engineering support for the Procurement, Project Development, Construction, and Commissioning teams; help ensure electrical engineering deliverables are completed, on-time, and on-budget while maximizing production efficiencies and output through electrical design, specifications development, equipment installations, troubleshooting, and work to minimize construction commissioning cycle; and ensure that the electrical design is safe, reliable, and meets Codes and Standards. The Electrical Engineer will also work closely with the project team in proposal development and participate in customer meetings and presentations. Position Description: The Electrical Engineer will assist in the oversight of the Engineer of Record's (EOR) project multi-disciplinary team to complete the Electrical and Controls Engineering design packages, perform calculations, and develop engineering solutions. In this role, you will typically work on power generation, distribution, utility-scale Power Plant Systems design for new and retrofit installations, and other industrial projects. Project knowledge range includes understanding complex EPC contracts and technical oversight of electrical contractors. The Electrical Engineer will also be responsible for supporting the management of electrical and control systems for power plants, designing power distribution systems, motor control centers (MCC) with wiring schematics, developing construction specifications, and writing & reviewing equipment specifications. Responsibilities Provide engineering support in the development of preliminary designs and technical proposals. Evaluate base designs and specifications, providing technical support to engineering inquiries through all phases in process improvement as per Owner requirements. Coordinate project schedules and engineering teams to execute work at site in a timely manner. Drive technical due diligence from project development, implementations, and commissioning phases. Review engineered specifications and drawings. Ensure installation and operations are in adherence to Gemma standards and customer requirements. The above job responsibilities are intended to describe the general nature and level of work performed by individuals assigned to this position. The above list is not intended to be an exhaustive list of responsibilities, duties and skills required. Desired Qualifications/Experience: 4-year degree in Electrical Engineering or Power Engineering. 5+ years of related experience. Experience with solar or renewable projects is beneficial. Project Management Professional (PMP) or Professional Engineer (PE) License is preferred. Strong experience in preparing project schedules, technical review of specs and designs, technical and financial analysis or project utilities, and risk analysis. Proficient in at least one of the widely used control system platforms, including current and legacy Rockwell systems, Siemens and Schneider, is a plus. Working knowledge of system and equipment grounding requirements (high resistance, building, and isolated grounding). Strong knowledge of applicable codes and standards (NEC, ANSI, NEMA, NFPA, IEEE, & OSHA). Understanding of generation and power factor correction. Experience with eTAP or SKM for performing short-circuit, coordination, and flash hazard studies. Familiarity with AutoCAD or Smart Plant Electrical. Desired Skills Rational decision-making & problem-solving abilities. Detail-oriented with a high degree of accuracy. Strong prioritization & organizational skills. Team player with good interpersonal & customer relation skills. Excellent communication skills in English, both verbal & written. Well-organized and able to participate in projects & meet deadlines. 15% domestic travel required. Gemma Benefits Advancement and Growth Opportunities Paid Time Off Comprehensive Nationwide Health and Welfare Benefits Company Sponsored Events Financial Planning and Savings Resources 401(k) Retirement Savings Plan Paid Holidays Work-Life Balance About Gemma Power Systems: Gemma Power Systems, a wholly owned subsidiary of Argan Inc. (NYSE: AGX), is a leading Engineering, Procurement and Construction (EPC) company providing innovative solutions for the power, renewable and industrial industry. Our wide-ranging and comprehensive experience comprises more than 15 GW installed capacity including state-of-the-art combined cycle and simple cycle gas turbine plants, biomass projects, solar facilities, wind farms, biofuel plants, industrial and environmental facilities spanning the continental United States. Additional information about Gemma Power Systems can be found at ******************* Gemma Power Systems is an equal opportunity employer. Employment and promotional opportunities are based upon individual capabilities and qualifications without regard to race, color, religion, gender, pregnancy, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other protected classification as established under federal, state, or local law.

About Us LiquidPiston is revolutionizing propulsion with our ultra-efficient, compact rotary X-Engine platform. Our engines deliver unmatched power density and fuel efficiency, making them ideal for next-generation aerospace applications including UAVs, eVTOL, hybrid-electric propulsion, and advanced defense systems. As we rapidly scale our aerospace-focused programs, we are building a world-class team to deliver flight-ready propulsion solutions. Role Overview The Electrical Engineer - UAV Avionics & Power Systems will own the design, development, and integration of all electrical and electronic systems for LiquidPiston-powered aerial platforms. This hands-on role combines power electronics, avionics integration, embedded controls, and aerospace-grade reliability engineering. You will work side-by-side with propulsion, airframe, and flight-control teams to deliver certifiable, high-performance electrical architectures that enable longer endurance, heavier payloads, and mission-critical reliability. Key Responsibilities Design and integrate engine control units (ECUs), power distribution, and avionics Interfaces for hybrid-electric and conventional UAV propulsion systems Design and develop the electronic control system architecture for of UAV propulsion and flight control systems Integrate and configure flight controllers and engine control units with onboard avionics, sensors, and communication modules Develop and implement embedded software/firmware for control, safety, and telemetry functions Apply systems engineering principles to ensure seamless integration of electronics, software, and mechanical components Support testing, debugging, and validation of integrated electromechanical UAV systems Collaborate with internal teams and external partners to meet system-level performance and reliability goals Document system design, software and hardware interfaces, and integration processes Qualifications Master's degree in Electrical Engineering, Computer Science/ Engineering, or a related field related field Must be a US person 5+ years of experience in aerospace electrical/electronics design (UAV, eVTOL, general aviation, or defense programs strongly preferred) Proven track record designing flight-critical or safety-critical electronics (redundancy, voting, dissimilar systems a plus) Expertise with electromechanical systems, sensors, communication protocols (CAN, UART, SPI, MAVLink, I2C), and PCB design Familiarity with model-based design tools (MATLAB/Simulink Embedded Coder) and HIL testing a strong plus Demonstrated ability to take electronics from concept through flight-test and into production or certification Self-starter who thrives in a fast-moving, resource-constrained environment typical of aerospace startups Benefits & Perks Flexible PTO: We value work-life balance and encourage time to rest and recharge. Health & Wellness: Comprehensive medical, dental, and vision coverage-you choose what works best for you. Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

The Mixed Signal Hardware Engineer will design and build mixed signal circuit cards which are used to interface to the customers device under test. These circuit cards include both digital and analog circuits used to provide switching, loads and signal conditioning in a test system! The Senior Hardware Engineer will be directly responsible for product design and validation along with reviewing designs of other engineers and mentoring new team members! **Key Qualifications** + Passionate in continuous learning and working with analog, digital, & other computer technologies + Board level digital circuit design expertise + Proficient in signal integrity analysis and measurement techniques + Experience defining routing constraints for high-speed interfaces + Experience in circuit design with CPU/SoC/Micro-controller + Experience with engineering design tools and schematic design + Proficiency with standard hardware lab equipment including scopes, logic analyzers, signal generators and power supplies. + Test automation expertise with scripting/programming language + HDL experience **Description** + Developing hardware features based on requirements + Technology research, circuit design, schematics capture, layout review and simulation + FPGA and CPLD development + Products bring-up, test and debugging + Signal integrity analysis + Debugging and resolving system level issues **Required Qualifications** + Bachelor's or Master's degree in Electrical/Electronic Engineering is required + Minimum 5 years of digital hardware design experience (board level design or VHDL/SystemVerilog) + US person (citizen or green card holder) + **Authorized to work in the United States without sponsorship now and in the future** + **Individuals with temporary visas such as E, F-1 (including those with OPT or CPT), H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire.** Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25026563 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

We are looking for a highly motivated and technically sound individual to join our Electrical Design Engineering team. This is in a department known as Environmental Controls & Life Support Systems. Electrical Design Engineering designs electronics that are required to drive electromechanical components to life support systems for Navy and Space applications. Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, high power (200KW) power conversion and more. These electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and the ability to operate in severe space radiation environments as well as high vibratory and shock load environments. The ideal candidate must be capable of designing, troubleshooting, and field servicing high power equipment for submarine applications in a low cost environment. Power Electronic Requirements • Extensive experience with power electronics (100kW) including use of IGBT, SCR, Relays, Rectifiers and FETs as a minimal. Experience with AC induction motors is a plus. • Familiarity with 440AC, 3 phase power per MIL-STD-1399 • Experience in selection and integration of COTS equipment into our product along with custom design General Design Experience • Experience in mixed signal Analog/Digital board design • Experience with microprocessor architecture and design is a plus. • The candidate should possess a diverse set of skills that includes the development of electrical system architecture, trade studies, requirements derivation, requirements allocation and analysis to support the allocations to electrical products designed both in-house as well as analysis for allocations to supplier items. Those supplier items can be, but not limited to: actuators, fans pumps, sensors, brushless DC motors, heaters and stepper motors. • The candidate should have a good practical understanding of EMC requirements equivalent to MIL-STD-461 and have the ability to assess project specific power quality requirements to understand and manage risks during the proposal, architecture development, design and qualification phases. • The candidate will be required to interface with customers during proposal, architecture development, systems requirements reviews, design reviews, test readiness reviews and technical interchange meetings. This requires the ability to communicate across technical and management disciplines professionally, effectively and independently through presentations, reports, and electronic media to support programs in both a customer lead role with suppliers and in a supplier role to major customers. Experience / Qualifications 6+ years direct detailed active involvement in the attributes described above is required. Highly Desired Capabilities • Support the Electrical Designers by providing guidance and recommendations for electrical/electronic component parts selection for high reliability space applications • Generate Procurement drawings and specifications for Electrical Components for space applications. • Translate Flight-quality electrical parts lists into commercial parts lists to support procurement of commercial parts for the Engineering Development process; this task includes locating distributors' inventory to expedite the procurement process. • Work with Purchasing to resolve technical issues with various Component Manufacturers. 5+ to 7 years experience Additional Information All your information will be kept confidential according to EEO guidelines.

Join Us on a Groundbreaking Project! O&G Industries is recruiting for a Junior Electrical Engineer to become part of a high impact, high performing group of men and women working on the replacement of the historic Connecticut River Bridge located between Old Saybrook and Old Lyme, CT. This $1.3 billion, joint venture project with O&G and Tutor Perini will significantly enhance rail traffic in the Northeast Corridor, improving efficiency, safety, and reliability for Amtrak, commuter rail, and freight operators. As part of this innovative project, youll be involved in building a state-of-the-art, two-track, electrified movable bascule bridge, complete with new track, signal, power, communication, and security systems. This project presents a rare opportunity to tackle complex challenges that encompasses a significant infrastructure initiative in the Northeast. Qualifications: * 3 years of engineering experience related to the scope of work * Bachelor's degree in electrical engineering * Knowledge of NEC codes, Amtrak processes, and AREMA codes * Effective communication and interpersonal skills We offer a competitive benefit and compensation package that includes health, dental, vision, 401(k) with company match, company paid life insurance, company paid long term disability insurance, paid holidays, and earned time off. To access different languages for the application process, click START YOUR APPLICATION. Find the drop-down box in the right-hand corner and navigate between English, Spanish, French and Italian. EOE/AA/Disability, Veteran and Second Chance Employer We are an E-Verify Participating Employer.

The Electrical Engineer is responsible for developing, integrating and supporting hardware and embedded firmware for new product development and sustaining engineering projects. * General and specialized circuit and system design * Analysis of general and specialized components, circuits, signals and systems * Circuit simulation using SPICE modeling * Schematic capture using Altium Designer * Hardware and system development and integration * Hardware troubleshooting and analysis * Embedded firmware development, primarily in embedded C/C++ programming languages, using IAR Embedded Workbench * Embedded firmware debugging and analysis using ICE, JTAG debuggers, data monitors, source level debugging and brute force methodology. * Calculate voltage, current and power requirements for components, circuits and systems. * Work closely with other engineering disciplines (mechanical, manufacturing, documentation, software) for the purpose of new and sustaining product development, troubleshooting and manufacturing. * Work closely with component engineers to select components, parts and materials. * Participate in both peer and management-led design reviews * Present design strategies and proposals to peers and management in both group and private settings.

Our award-winning client is looking for a highly motivated power electronics engineer to join their Sensing and Communications Department. Successful candidates will have a BS, MS, or PhD degree in electrical engineering with professional experience in design, development, and test of power electronic systems. Professional experience beyond 5 years is desired, but may not be required in all circumstances. Successful applicants will support the design and development of a wide variety of underwater maritime systems including electromechanical actuation systems, payloads for unmanned underwater vehicles, acoustic communication transceivers, wireless power transfer, and high power acoustic transmit arrays. Candidates must have a proven track record of designing and implementing custom PCBs for prototype R&D systems. Experience designing energy storage system components, DC/DC converters, power amplifiers and magnetics, and interfacing to the embedded processors that control such devices is required. Previous experience laying out boards and/or managing vendors which provide layout services is highly desired, as is experience designing for EMC and testing and integrating PCBs into larger systems. Responsibilities: Design, development, integration, and debugging of complex power systems. Required Qualifications: Experience with power system design consisting of circuit analysis and simulation, component selection, schematic capture, PCB design, and verification testing. Design of DC/DC and AC/DC power systems ranging from 500 W to 10 kW for use in harsh operating environments. Experience with implementation of high availability power supplies and/or failover systems. Comprehensive knowledge of electronic power devices such as MOSFETs, Schottky Diodes, SiC FETs, and IGBT's. Proven experience designing with electromechanical actuators, DC/DC converters, power amplifiers, and magnetics. Experience troubleshooting electronic systems. BS in electrical engineering with a power systems focus. Able to obtain and maintain a Secret Security Clearance. Desired Attributes and Skills: Prior experience designing electronics for underwater maritime systems. Experience working with acoustic transducers. Experience with various power converter topologies such as Buck, Boost, Flyback, SEPIC, etc. and their control methodologies. Previous experience with or oversight of electronic layout, bill-of-materials, and assembly process. Experience with common digital communication schemes (RS232/RS422, I2C, I2S, SPI, McBSP). Basic understanding of signal processing and Matlab data analysis. Prior experience creating technical content for new products, ideas, or other business development pursuits. Experience working in an R&D environment and working in small multidisciplinary teams. Experience mentoring junior EE staff on electronics design, PCB implementation, and board troubleshooting. Experience with C/C++ coding for microcontrollers (or similar). Experience using National Instruments (or similar) data acquisition systems and LabView.

The role of this position will be implementing new and maintaining existing equipment for the bearing manufacturing processes at RBC - Aircraft Products. The scope of this role includes identifying opportunities to reduce costs with improved equipment and systems, supporting the troubleshooting and repair production equipment to improved utilization, improvement of existing equipment control systems, developing additional functionality to production equipment, and developing/maintaining a system for tracking equipment control software. Principal Responsibilities Troubleshoot and repair equipment that is down for control and electrical system issues. Add additional functionality to production equipment. Maintain a system for keeping track of control software. Qualifications A BS in electrical engineering or a combination of trade school education plus experience of 5+ years of experience working with machine controls. Knowledge, Skills and Abilities Working knowledge of machine tool controllers, including troubleshooting, repair and programming. Knowledge of electrical systems, troubleshooting and repair. Knowledge of PLC programing Ability to work well on teams. Good organization skills Responsive to customer needs

Reporting to the Engineering and Maintenance Manager, the Controls Engineer will provide PLC control support for our manufacturing facility. This position is key support for wide range of capital projects which includes creation of new capabilities, operation improvements and maintenance support for long-term resolution for any issues. The qualified incumbent will be required to actively interface with Safety, Quality, Procurement, Equipment Vendors, Service Providers (including Designing Consultants and Contractors). Essential Functions and Primary Responsibilities: * Provide electrical and control support for Manufacturing, Envops, Plant Engineering and other departments throughout the division * As a technical expert, provide Electrical & Control Systems support to all the departments throughout the plant. * Support Lean initiatives, Value Stream Programs and Kaizen events * Key support for any ongoing initiatives related to safety and quality improvement * Program PLC's and Variable Drives (which includes creating new projects, modifying existing ones and supporting ongoing End-of-Life Cycle migration programs) * Lead and work with multi-functional groups to achieve project team objectives * Provide leadership and instruction, as required, to implement new installations and train others in safe and effective practices * Plan and develop Capital Project requests, including the financial estimating and business justifications * Work closely with Maintenance and Operations personnel to investigate equipment malfunctions and/or new installation design and development * Use the most recent Plant and Business Area safety, environmental, and quality review process to allow capital and expense projects to be planned, designed, and installed in compliance with applicable local, state, and federal codes and regulations * Conduct final safety review of all project installations and interface with all levels of management to report weekly and monthly updates as needed * Provide project management leadership and skills to direct others and keep assigned projects within timeframe and budget, to include, maintaining budgets and work schedules, organizing, and participating in shareholder meetings and ensuring all deadlines for certain projects are met * Participate in project design meetings and propose improvements, if necessary * Evaluate potential problems and technical hitches and develop solutions * Plan and manage team goals, project schedules and new information * Supervise current projects and coordinate all team members to keep workflow on track * Manage project-related paperwork by ensuring all necessary materials are current, properly filed and stored * Direct project correspondences by preparing and reviewing project proposals, memos, meeting minutes and emails * Communicate with clients to identify and define project requirements, scope, and objectives * Adhere to budget by monitoring expenses and implementing cost-saving measures * This is not an exhaustive list of duties or functions and may not necessarily comprise all the "essential functions" for purposes of the ADA Requirements: * BS Degree in an Engineering discipline or AS Degree in an Engineering discipline with relevant experience * Project or Production Engineer experience with demonstrated quality performance * Ability to investigate, analyze, plan, design and direct the execution of a variety of engineering solutions * Proficiency with PLC's and variable speed drive programming * High power electrical and transformer knowledge * Ability to learn new software programs and use CAD * Ability to support a 24/7 operation * Some business travel to off-site locations on occasion - outside travel required to develop projects in support of business objectives, visit vendor facilities, conduct trials, attend seminars, training, and other company sites Ahlstrom is a global leader in combining fibers into sustainable specialty materials. Join our journey to create a more sustainable world with products and solutions that Purify and Protect, with Every Fiber, for a Sustainable World. Our three divisions, Filtration and Life Sciences, Food and Consumer Packaging, and Protective Materials, address global trends with safe and sustainable solutions. We are deeply committed to building and maintaining safe and inclusive environment and culture, where everyone feels valued and respected. At Ahlstrom, we all have equal opportunities to belong and reach our full potential. Our net sales in 2024 amounted to EUR 3.0 billion and we employ some 6,800 people. Read more at ****************

At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview As an Electrical Engineering Intern at REGENT, you will work at the intersection of the systems that power, move, and control our seagliders. This multidisciplinary role is primarily focused on electrical engineering, with direct exposure to propulsion and actuation systems that push the boundaries of high-performance maritime aviation. You'll support the design, integration, and testing of critical vehicle subsystems-from high-voltage distribution to electromechanical actuators to power-dense propulsion hardware. If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do As an intern in this role, you may: Electrical Systems * Support design, layout, and documentation for HV/LV power distribution and signal networks * Develop and test custom PCBs for sensing, control, and actuation * Build, route, and validate wire harnesses across electrical, propulsion, and actuation subsystems * Create and maintain schematics, harness drawings, and test documentation Propulsion & Actuation * Assist with the electrical integration of propulsion and actuation systems * Support testing of motors, actuators, and power electronics with a focus on instrumentation and safety * Troubleshoot hardware issues on benches, in the lab, and on the vehicle Simulation, Testing & Tools * Use modeling/analysis tools (MATLAB/Simulink, LabVIEW, etc.) to evaluate system performance * Build and improve test setups, benches, and automated test equipment * Capture and analyze data to support subsystem validation What You'll Bring * Currently pursuing a degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or similar * Experience with electronics lab tools (oscilloscope, power supplies, DMMs, loads, soldering tools) * Understanding of digital, analog, or power electronics fundamentals * Ability to interpret electrical schematics and/or mechanical drawings * Interest in multidisciplinary engineering across electrical, mechanical, and control systems Bonus Experience * Experience with motors, actuators, sensors, or motor controllers * Familiarity with Python, MATLAB, or similar tools * Exposure to PCB design tools (Altium, KiCad, Eagle) * Comfort with high-voltage or high-power systems Who We're Looking For * Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. * Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. * Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. * Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer * Competitive compensation * Housing Stipend available for those temporarily moving to join our team * Daily, free catered lunches * Learning & professional development opportunities * Meaningful projects that make an impact * Mentorship & guidance from experienced team members If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: * The Test Engineer is responsible for the development, integration, sustainment, and continuous improvement of specialized Electrical, ESS (Environmental Stress Screening), and RF test equipment as indicated by customer or internal specifications * Work within multi-disciplinary team environment and support proposal efforts and technical reviews * Position reports to the Test Engineering Manager Duties and Responsibilities: * Prepare test plans and procedures from Customer and/or Engineering specifications * Program, set-up, and operate various Electrical, ESS, and RF Test equipment using customer supplied data * Direct electrical analysis of test requirements for digital, analog, mixed signal, RF, and power circuits * Visually inspect electronic assemblies using various inspection equipment (Microscope, calipers, X-Ray equipment) for conformance to customer, IPC guideline specifications, and any written procedures * Develop specialized test solutions, tooling, and fixtures to customer requirements * Design complex test or test fixture circuitry to support automated testing by applying knowledge and principles of electronic theory, testing methodology, and electronic engineering * Perform and/or coordinate preventative maintenance on associated test equipment * Identify, develop, qualify, and implement new test processes/equipment through DOE & capability testing * Provide technical and analytical support to customers and operators regarding product quality and the testing process * Troubleshoot functional test failures and work with process engineering team on root cause corrective action investigations Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Ability to read and interpret schematics, electrical diagrams, and blueprints * Understand basic forms of digital and analog circuitry; read, interpret, and apply technical information/specifications * Must be able to create detailed product test procedures * Ability to troubleshoot basic analog electronics circuitry using a DMM * Excellent analytical and problem solving skills * Must have good hands on mechanical and engineering skills * Demonstrated ability to prioritize and manage multiple simultaneous projects * Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required; eye exam is required annually * Due to ITAR requirements, applicants must be a U.S. Citizen or Permanent Resident Education and Experience: Education: * Bachelor of Science (BS) in Engineering, Electrical Engineering preferred Preferred Experience: * The ability to obtain and maintain a U.S. government issued security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. * 2+ years of engineering/technical related experience, focused on test processes * Previous printed circuit board and/or RF experience * Proficient in the utilization of a variety of test equipment, including: Oscilloscopes, DMM's, Power Meters, Spectrum Analyzers, RF Signal Generators, Component Analyzers, RF Network Analyzers, and Noise Generators #LI-PG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.