Electrical engineer internship jobs in Murfreesboro, TN - 64 jobs

Sr. Electrical Engineer The Sr. Electrical Engineer will lead and develop all aspects of electrical engineering to support production, maintenance, projects, and continuous improvement processes. Responsibilities + Delegate appropriate authority and responsibilities to subordinates in the areas of production support, maintenance support, and project management. + Maintain close surveillance over operations through reports, staff meetings, observation, and personal contact to ensure project conformance to scope, deadlines, budgetary conformance, and personnel utilization. + Ensure the department is technically and organizationally capable of supporting all required manufacturing activities through appropriate staffing and continuous improvement. + Manage the electrical portion of the capital budget for the plant. + Direct capital or operating engineering projects as a Project Engineer, as assigned. + Develop department personnel to improve performance in electrical safety, knowledge, and skills. + Ensure compliance with the National Electrical Code, NFPA Standards, OSHA safety requirements, and Federal and State environmental requirements through proper engineering planning, design, and installation. + Identify safety concerns, participate in incident investigations, and support the development of corrective actions. + Collaborate with the Maintenance and Engineering Manager to develop and recommend budget items and short and long-range operating objectives. + Identify training and development needs, initiating programs as required. + Ensure consistent practice of the company's values, policies, and programs. + Perform other duties as assigned by management. Qualifications + Experience in electrical engineering, high voltage, project management, reliability, and maintenance. + Bachelor's degree in Electrical Engineering or a related field. + 5-10 years of progressive experience in a heavy manufacturing environment such as metals, mining, or cement. + Experience with engineering and project management software. + Knowledge of OSHA, general EPA regulations, and NEC. + Professional Engineer designation is preferred. + Experience with high voltage systems (thousands of volts). + Working knowledge of project engineering processes, plant construction practices, and equipment installation. + Availability for emergencies and off-shift work as needed. + Ability to travel for special projects and meetings. Job Type & Location This is a Permanent position based out of Gallatin, TN. Pay and Benefits The pay range for this position is $57.69 - $69.71/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Gallatin,TN. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Senior Electrical Engineer - Consulting | Leadership | Impact Employment Type: Full-Time Salary Range: $121,000 - $143,000 annually (DOE) Total Compensation Package: $135,000 - $165,000+ (including benefits and performance bonuses) Seniority Level: Senior (PE preferred) Industry: Engineering Consulting | Buildings & Infrastructure About the Role A forward-thinking engineering consulting firm is seeking a Senior Electrical Engineer to lead high-impact building and infrastructure projects in Brentwood, TN. This is not just a technical role - it's a leadership opportunity where your expertise drives outcomes, strengthens client trust, and helps grow the next generation of engineers. If you're ready for a role that combines technical mastery with strategic influence, this is your chance to make a lasting impact. What You'll Do Lead the Charge: Direct the electrical design process from concept through construction across commercial, institutional, and infrastructure projects. Own the Technical Side: Design and review power distribution, lighting, fire alarm, and low-voltage systems, ensuring compliance with codes, standards, and performance objectives. Manage Projects: Oversee multidisciplinary project teams, coordinate deliverables, and ensure deadlines and budgets are met. Be the Client's Trusted Partner: Develop and maintain client relationships, provide expert guidance, and deliver solutions that exceed expectations. Mentor & Develop Talent: Coach and guide junior engineers and designers, setting a high bar for technical excellence and leadership. What You Bring Education: Bachelor's degree in Electrical Engineering (or related discipline). Licensure: PE license highly preferred (or on track to obtain). Experience: 10+ years in electrical design, preferably within engineering consulting. Technical Skills: Proficiency in power systems design, load calculations, and electrical code compliance. Leadership Skills: Proven ability to manage projects, lead teams, and communicate effectively with clients and colleagues. What's In It for You Above-market salary with performance bonuses. Comprehensive benefits package: healthcare, 401(k), PTO, and more. Long-term growth opportunities into technical leadership or practice management. Collaborative culture that supports work-life balance and professional growth. Projects with visible community impact that you can take pride in. ?? SEO Keywords (for job boards & Google ranking): Senior Electrical Engineer jobs Brentwood, Electrical PE engineer jobs Tennessee, Electrical design engineer consulting, power distribution engineer jobs, lighting and fire alarm design engineer, low-voltage systems engineer, electrical engineering careers TN, consulting engineering jobs Brentwood, PE electrical engineer leadership, building systems electrical design

Job DescriptionDescription: We are not actively hiring right now but we are always accepting applications and looking for great new talent to join our team. Reliable MicroSystems is seeking a Staff Engineer IV with an Electrical Engineering degree and work experience that can be directly brought to bear on complex technical problems. The ideal candidate should be able to work independently, as well as a member of a team, to achieve a defined goal. Tasks may include integrated circuit design, integrated circuit layout, and/or radiation effects failure analysis. Candidates should be able to present results to of their work to members of management or customers of Reliable MicroSystems. Requirements: Required Qualifications: BS degree with 8+ years experience, or MS degree with 4+ years experience, or PhD with 2+ years experience Ability to obtain a Secret Clearance required for this role Position Tasks: Performs engineering tasks of moderate to high complexity as directed by project or program manager. Provides technical leadership to one or more teams. Ensures that tasks are completed correctly and on time. Position Description: Provides a thorough knowledge of a related discipline as a technical specialist. Performs technical work on designated project or projects as directed. Possesses an engineering degree and work experience that can be directly brought to bear on complex technical problems for ultimate solution, including but not limited to computer science, electrical engineering, or radiation effects expertise. Upon technical direction, works independently to achieve applicable solutions. Tasks may include original source code development, integrated circuit design, integrated circuit layout, and/or radiation effects failure analysis. Presents results to management in coherent and defensible way. Documents results in presentation and written form, including briefing charts and report documents.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, Aids to Navigation, including Flash, Sabik Marine and Sealite, are leading providers of lighting and navigational aids for the marine, obstruction, and airfield end markets. Offering the broadest portfolio of solutions, we help people transverse the world safely by air, land, and sea. How you will make an Impact (Job Summary) SPX is a diverse team of unique individuals who all make an impact. As a Sr. Electrical Engineer, you will play a key role in the design, development, and implementation of electrical systems and components across various projects. You will contribute technical expertise, collaborate with cross-functional teams, and help drive engineering excellence. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: Technical Leadership Provide advanced technical expertise in electrical design, systems integration, and engineering software/tools. Review and develop technical documentation, drawings, and specifications. Resolve complex engineering challenges and support project teams with technical guidance. Project Execution Manage assigned project tasks, timelines, and deliverables to ensure timely and cost-effective completion. Collaborate with other departments (mechanical, software, operations, etc.) and stakeholders to align project goals and objectives. 3. Continuous Improvement Contribute to the development and implementation of engineering standards, protocols, and procedures. Recommend and implement best practices to optimize engineering performance. Ensure all engineering activities comply with industry standards, local regulations, and safety requirements. Stay updated with the latest advancements in electrical engineering and relevant technologies. What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience Minimum of 5 years of experience in electrical engineering, with demonstrated expertise in technical project execution. Strong knowledge of electrical design, systems integration, and engineering software/tools. Electronics design and development at component, circuit, and system level. Printed Circuit Board (PCB) layout and design. Microcontroller-based design and development. Excellent organizational and communication skills. Preferred Knowledge, Skills, and Abilities Proficiency in Altium Designer with 3+ years of experience creating schematic designs and multilayer PCB layouts, including component placement, routing, and design rule optimization. Proven ability to manage multiple projects simultaneously. Knowledge of industry standards and safety regulations. Strategic thinking, hands-on approach, and a passion for engineering excellence. Education & Certifications Bachelor's degree in electrical engineering or related field Travel & Working Environment Hybrid Working Environment 3 days Onsite Office Environment with occasional interaction in the production department Domestic and International Travel up to 10% How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realise their fullest potential.

This position will manage product development projects within the Industrial/Commercial Fan business through creating, maintaining, and processing accurate design information in the development of new products. This position will interact heavily with sales and marketing to ensure the voice of the customer is understood. The position will work with partner suppliers to leverage their expertise in product development. This position will also require test development and analysis for new and existing products. The position will be involved in compliance and regulatory testing to ensure all products are compliant with relevant industry standards. The position requires hands on work to develop and deliver high quality industrial products. Essential Duties and Responsibilities: Be an integral part of activities associated with design and development of innovative products; help to maintain engineering standard components libraries; generate product and system procedures and engineering administrative support functions. Use sound engineering principals to refine product concepts in reliable product designs that meet performance, compliance, product integrity, safety, and aesthetic requirements. Will be responsible for design, development, and implementation of new products as well as sustaining efforts for existing products. Be able to manage product development projects independently and an ability to leverage outside resources and suppliers. Provide recommendations and assist in creating and maintaining engineering standard templates, notes and other items used throughout the engineering department. Responsible for review of drawing/specification packages to ensure consistency in dimensioning, tolerances, nomenclature etc... Will conduct electrical and industrial control tests on a wide variety of Hunter Fan Products. In addition, may run tests on competitive products. Develop test methods, procedures, and reports for reliability or compliance tests. Knowledge of schematics and wiring diagrams and the ability to interpret circuit functions. Review compliance reports Maintain LabView programs Conduct air delivery tests on ceiling fans per DOE regulations Will set up and conduct life tests on product as directed. Must be well organized and can read and interpret technical documents such as UL standards. Must be able to read and interpret engineering drawings. Familiar with and can use basic hand tools and power tools. Knowledge and Skill Requirements Strong project management skills. (PMP is a plus) Experience with AC & DC motors. Experience with variable frequency motor drives. Experience with DC motor design is a plus. Experience with industrial wiring codes and standards is preferred. Experience with Industrial Controls Modbus & BACnet is preferred. Industrial Networking Experience TCP/IP & RTU Networks is preferred. Familiarity with reliability and compliance testing. Experience with data collection and instrumentation National Instruments LabView Preferred. Experience using and maintaining lab equipment oscilloscopes, power analyzers, and multimeters. Experience working effectively with cross-functional teams Ability to manage multiple projects simultaneously SolidWorks CAD experience is a plus. Experience with Microsoft Office Suite Physical Demands- must be able to lift 50 pounds Education/Experience Requirements Bachelor's Degree in Electrical Engineering (Electro-Mechanical or Electrical Controls) 5+ years of experience in Engineering Design R&D lab and/or testing experience

Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: This role carries responsibility for management-level issue expediting, field technical support, startup technical support and commissioning technical oversight. This individual is intended to be the Project Manager's technical representative as well as a technical resource for the QC Managers and Site Superintendents. WHAT YOU'LL DO: Design and develop intra-switchgear and inter-equipment control systems Design and develop site-wide Sequence of Operation (SOO) Conduct vendor coordination and submittal review and factory witness test to ensure equipment are produced to spec and conform with all design-build requirement Design and develop safety mechanical, electrical, and or electromechanical interlock systems Design and develop system wide automation systems using PLC or RTAC style industrial controllers, including but not limited to: System overload prevention, multi purpose busway interlocks, load management systems, generator plant load curtailment systems, Gen plant start and load controls including selective load pickup and load shed schemes, etc. Design and develop SEL/ABB/Siemens relay protection and logic settings such as MTM transfer schemes using mirrored bit communication or hardwire Design and develop SEL/ABB/Siemens relay IEC61850 based protection and control logics WHAT YOU'LL NEED TO BE SUCCESSFUL: Understanding on power system and provide power system failure analysis, event analysis or SOE analysis and or develop a metering / triggering system to conduct such analysis. Understanding of electrical power systems including generators, transformers, motors, automated switch gear, protective relays, UPS systems, DRUPS systems, motor-generator sets, battery storage systems, inverters, PV systems, wind turbines, substation equipment etc. Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred Ability to prioritize and manage multiple tasks, changing priorities as necessary Ability to work under time pressure and adapt to changing requirements with a positive attitude Effective oral and written communication skills as required for the position Ability to be self-motivated, proactive and an effective team player Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: Bachelor's degree in Electrical Engineering and minimum of 8+ years of engineering design experience in electrical power systems PE required TRAVEL: Up to 100% WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning Noise level is usually low to medium; it can be loud on the jobsite. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Occasional lifting of up to 50 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits ESOP - Employee Stock Ownership 401K Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

From a small family business to a multi-billion-dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of “People Build Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Sonoco's Emerging Leaders Program (ELP) is your pathway to becoming one of Sonoco's future business leaders. For over four decades, this selective program has been a cornerstone of career growth for professionals starting their journey with us. Grounded in our mission to empower emerging leaders to excel as leaders, teammates, and followers who consistently do the right thing, ELP offers full-time positions designed for recent college graduates that go beyond a traditional first job. Over 24 months, associates gain hands-on experience, personalized leadership development, and coaching tailored to their unique strengths - all while building connections with other emerging leaders across the company. With access to our diverse portfolio of businesses, ELP associates are empowered to shape their careers, contribute to Sonoco's culture, and deliver meaningful impact from day one - growing into the well-rounded, value-driven leaders of tomorrow. Your time spent in the ELP will cover specific core objectives as follows (but not limited to): Technical Skills Training - Safety, Quality, Scheduling, Customer satisfaction Leadership Training - Supervisory skills, Performance Management, Mentorship Business Insights - Accountability, Execution, Risk Taking, Budgeting Culture Integration - including Communication, Collaboration and Innovation We want employees who can help us live our purpose each and every day. Our core belief is the People Build Businesses, by ‘Doing the Right Thing'. To become a member of the ELP you must have strong ethics, a passion for innovation, and be willing to go the extra mile. We are looking for students who: Interest in automation of control programming Have or will obtain a Bachelor or Master's degree in Mechanical Engineering, Electrical Engineering, Sciences, Technology or Business by December 2025 or May 2026 Previous internship experience (preferably in Manufacturing or functional area) Proven leadership experience Desire to work in a Manufacturing environment Technical aptitude Strong communication, presentation, and interpersonal skills All ELP Associates must be open to relocation (immediately or in the future) and be willing to work rotating or late shifts. This position is within our Sonoco Metal Packaging division, located at our Chestnut Hill, Tennessee facility. Compensation: The annual base salary range for Non-Technical Degrees is between $67,00 and $70,000 The annual base salary range for Technical Degrees is between $76,000 and $82,500 At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options 401(k) retirement plan with company match Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

Technical Antenna - Medium Voltage (Electrical Engineer)- Onsite at the Mount Juliet, TN facility The Technical Antenna Engineer is dedicated to complete assignments that focus on investigating issues and recommend corrective action(s) and the maintenance of engineering records for standard product offerings. Execute approved recommendations. Create/write Application Notes and submit for validation. The TAs will provide essential support to our manufacturing plants supporting the product range, in resolving ongoing issues and enhancing supplier resiliency. This position will report to the Manager, Continuous Improvement, structured to the Engineered-To-Order (ETO) Simplification Team, dedicated to collaborating with the Offer, Sales, and Global Supply Chain (GSC) teams to optimize engineering and manufacturing processes. The team's goal is to align closely with customer demand to minimize product lead times. What will you do? Coordinates, prioritize, and resolve the product support requests such as, MOTS (Middle Office Technical Support), PDCRs (Product Design Change Request), and review ACE tickets (Application Coded Equipment) Support product lines and teams - Project Engineering, Manufacturing Engineering, Quality, and Procurement to attain lead times and reduce errors Performs standard record changes based on priorities and investigations related to standard design issues. Support CS&Q (Customer Satisfaction & Quality) Team with deviations (eDerogations) requests, obsolescence of designs, CoS (Change of Suppliers), PPAP (Production Part Approval Process), and FAIR (First Article Inspection Report), 3F analysis (Fit, Form & Function) and Product Audits. Collaborate with Design/ Continuous Engineering Team per TA-CE RASCI (Responsible. Accountable, Support, Consult, Irrelevant) and Delegation Rules. Support in technical problem solving thru root cause analysis (8D), risk assessment via PFMEAs, and support criticality/ part qualification through CQCS (Component Quality Control Specification) Support parts localization tasks building BOM, creating drawings/parts/assemblies and collaborate with Procurement, Quality and MV ETO Hub Leads. Maintains an up-to-date, thorough knowledge of applicable local, state, and federal codes/regulations and interprets and applies industry standards (UL, ANSI, NEC) to new designs. Assist in planning, designing, and executing electrical projects, including reviewing specifications and preparing technical documents. Prepare and check engineering drawings, calculations, and reports for accuracy and compliance with standards. Troubleshoot electrical issues and propose solutions to technical problems. Maintain documentation including design specs, test reports, and maintenance logs. Ensure compliance with safety standards, codes, and regulations during all phases of work. What skills and capabilities will make you successful? Accountable, initiative-taking, with solid and pragmatic problem-solving skills Strong written and oral communication skills to collaborate with remote teams and management. Ability to work in a culturally diverse workplace with people from a variety of backgrounds, cultures, and beliefs. What qualifications will make you successful for this role? Experienced in the design, applications, and/or installation of Medium Voltage products. Proficient in SeeXP, PDM, Order Editor, ACE, and SAP. Knowledge of electrical systems, circuits, and safety standards. Bachelor's degree in engineering, preferably in Electrical disciplines. Minimum 5+ years' experience. Must get quickly integrated into the global offers and the challenges that are different from AIS and traditional PP NAM, including the physical equipment and designs, also the global processes and support organizations. Support all Medium Voltage switchgear. Locationl: This role is based at our ETO manufacturing plant in Mt Juliet, TN and requires to be on-site Monday thru Friday - 5 days a week. Let us learn about you! Apply today. You must submit an online application to be considered for any position with us. This position will be posted until filled. Looking to make an IMPACT with your career? When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values - Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork - starts with us. IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world. We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one. Become an IMPACT Maker with Schneider Electric - apply today! €36 billion global revenue +13% organic growth 150 000+ employees in 100+ countries #1 on the Global 100 World's most sustainable corporations You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and 'inclusion' is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter here Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, Aids to Navigation, including Flash, Sabik Marine and Sealite, are leading providers of lighting and navigational aids for the marine, obstruction, and airfield end markets. Offering the broadest portfolio of solutions, we help people transverse the world safely by air, land, and sea. How you will make an Impact (Job Summary) SPX is a diverse team of unique individuals who all make an impact. As a Sr. Electrical Engineer, you will play a key role in the design, development, and implementation of electrical systems and components across various projects. You will contribute technical expertise, collaborate with cross-functional teams, and help drive engineering excellence. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: * Technical Leadership * Provide advanced technical expertise in electrical design, systems integration, and engineering software/tools. * Review and develop technical documentation, drawings, and specifications. * Resolve complex engineering challenges and support project teams with technical guidance. * Project Execution * Manage assigned project tasks, timelines, and deliverables to ensure timely and cost-effective completion. * Collaborate with other departments (mechanical, software, operations, etc.) and stakeholders to align project goals and objectives. 3. Continuous Improvement * Contribute to the development and implementation of engineering standards, protocols, and procedures. * Recommend and implement best practices to optimize engineering performance. * Ensure all engineering activities comply with industry standards, local regulations, and safety requirements. * Stay updated with the latest advancements in electrical engineering and relevant technologies. What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience * Minimum of 5 years of experience in electrical engineering, with demonstrated expertise in technical project execution. * Strong knowledge of electrical design, systems integration, and engineering software/tools. * Electronics design and development at component, circuit, and system level. * Printed Circuit Board (PCB) layout and design. * Microcontroller-based design and development. * Excellent organizational and communication skills. Preferred Knowledge, Skills, and Abilities * Proficiency in Altium Designer with 3+ years of experience creating schematic designs and multilayer PCB layouts, including component placement, routing, and design rule optimization. * Proven ability to manage multiple projects simultaneously. * Knowledge of industry standards and safety regulations. * Strategic thinking, hands-on approach, and a passion for engineering excellence. Education & Certifications * Bachelor's degree in electrical engineering or related field Travel & Working Environment * Hybrid Working Environment 3 days Onsite * Office Environment with occasional interaction in the production department * Domestic and International Travel up to 10% How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: * Competitive and performance-based compensation packages and bonus plans * Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realise their fullest potential. ABOUT SPX SPX is a diversified, global supplier of infrastructure equipment with scalable growth platforms in heating, ventilation and air conditioning (HVAC), detection and measurement, and engineered solutions. With operations in 17 countries and approximately $1.4 billion in annual revenue, we offer a wide array of highly engineered products with strong brands. SPX TOTAL REWARDS At SPX , what's in it for our employees transcends market-competitive compensation and benefits. Our Total Rewards program also includes opportunities for employees' personal development, career growth, and recognition. These programs focus on alignment and assessment of organizational, team, and individual efforts toward achieving business results. Our development and career growth programs empower our employees to enhance their skills, develop new competencies, and pursue career goals. SPX benefits package provides choices designed to help employees manage their well-being. Our compensation programs are performance-based to recognize and reward employees who work hard, display the values and leadership practices we embrace, and deliver exceptional results. OUR VALUES * Integrity * Accountability * Excellence * Teamwork * Results At SPX, our values are at the heart of everything we do. We use our values every day to help us make the right decisions. We embrace a common purpose and strive for improvement. We respect and value each other as individuals and recognize that only by working together, as a team, can we reach our full potential. We take responsibility for our actions, build strong relationships with each other and our customers, and always act ethically. Our values inspire us to achieve the high standards of quality, safety, and performance that our customers expect and deserve. WORKING AT SPX Our work environment is established on a work-life philosophy supported by policies, programs, and practices that help employees achieve success within and outside the workplace. We believe in creating an inclusive work environment where employees strive to realize their fullest potential. We are an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, age, disability, veteran status or any other legally protected basis.

Job Level: Mid Level Home District/Group: Central District Department: Field Operations Market: Transportation Employment Type: Full Time If you're viewing this position on LinkedIn, we recommend applying through our careers portal at our website ************************** to ensure your application is fully reviewed by our recruiting team. We look forward to reviewing your application and connecting with you! We are adding experienced Field Engineers to our Central division of Kiewit to support our growing Infrastructure project portfolio around the country. We are hiring in our Southeastern region to support projects in the Tennessee and Kentucky areas and offer relocation to the region and per diem while on projects outside of the immediate area. As an experience Field Engineer, you will play a significant part in the success of planning, organizing and implementing project engineering & project controls tasks for our heavy civil construction projects that could include major highway infrastructure, bridge projects, rail/transit, aviation, water/wastewater and power. Excellent communication, attention to detail and an ability to work well in a team environment are considered critical to this position. We are looking for individuals with motivation and eagerness to expand their skillset in infrastructure construction. This team is the first construction team to the site, performing site prep for the roads, bridges or industrial buildings. Our team performs mass grading/excavation, cut and fill, drainage, paving, underground piping and utility work, earthwork, site development, concrete form work, asphalt paving, and related activities. ENR ranks us as #2 in Construction, and we excel at delivering EPC projects, particularly in large-scale infrastructure projects. If you are looking for a career, with stability and a diverse portfolio of EPC projects to work on and want to work on hyperscale projects, look no further! We are an employee-owned company which fosters dedication and commitment to project success and are positioned as a key player in meeting growing electricity demands. We cultivate a culture of excellence, innovation and teamwork, making it the most rewarding place to build your career. District Overview Kiewit's Central District is one of our largest infrastructure districts specializing in heavy civil, structural concrete/bridge, water/wastewater, and transportation projects. We self-perform work such as mass grading, drainage, paving, utility and more - so be ready to get your hands dirty! While headquartered in Denver, Colorado, the majority of our work is concentrated in the Central and South-Central regions of the United States. We are looking for people committed to the construction industry rather than design. Location Our southeast office is located in Brentwood Tennessee, and individuals work out of this office, and travel around the region to support projects in TN, KY, MO, MS and NE, and potentially other surrounding states. Must be willing to relocate and travel. We provide per diem or relocation to the projects, based on duration. Responsibilities Field Engineering: * Assist in interpretation of drawings and specifications for field crews and craft supervision * Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work * Assist in the preparation of work plans and work packages * Assist in field surveying and work layout support including elevation, control points, and compilation of as-built data * Assist in compiling, processing, and confirming daily labor timesheets * Assist in the preparation of Job Hazard Analysis (JHA's) * Participate in jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training * Order and schedule material deliveries * Plan, schedule, and coordinate work groups on the jobsite * Supervise field operations Office Engineering: * Perform material takeoffs from drawings, specifications and other contract documents * Perform basic engineering calculations and technical drafting to support field operations * Assist Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use * Participate in the preparation of purchase orders and subcontracts, performing minor solicitations and purchasing as requested * Schedule maintenance and performing updates as directed by others * Assist in the maintenance of basic project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), and memorandums * Enter data into the job cost system and participate in reviewing cost reports with jobsite management * Assist in generating change orders and as-built data to be reviewed by the Project Manager * Provide field support and supervise subcontractor operations Estimating: * Assist in reviewing and analyzing historical data relative to the project, incorporating various productions and costs appropriate in preparation of a bid * Complete a plan and specification review for an assigned project, assessing the risk areas and bringing them to the attention of the Senior Estimator * Complete material and quantity takeoffs according to bid documents Qualifications * Bachelor's degree in a construction-related field or engineering or similar field, with an interest in developing skills and experience in hands-on, self performed construction with at more than 2 years of experience (not including internships) in the construction field, performing functions as outlined above, preferably in the Heavy Civil Infrastructure market. If no BS degree, must have at least 6 years related experience/education. * Must have working knowledge and be able to perform operations in scheduling, understand "critical path method/CPM", material controls, estimating, subcontracts, change orders processes, record keeping/documentation control, jobsite reviews, coordination of work on a site, and understand estimating systems, material management systems, scheduling tools, document control systems. * Experience with leadership and management of people, strong communication skills (verbal and written), planning and organization skills * Familiarity with paving, grading, cut and fill, excavation, anchor bolt on, concrete forming is ideal for this role. * Willing to travel to projects and relocate. #LI-JB1 Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

Our client, a Tier 1 automotive supplier in the greater Indianapolis, IN area, is seeking candidates for the position of Electrical Engineer. This position will design, develop, implement, and modify production equipment, procedures and processes for cost effective and efficient operations. This role offers a great work schedule of approximately 45 hours per week, generally Monday \- Friday 7:00a \- 4:00p with some extra hours as business needs require. This role will be supporting 24\/7 operation, but there will be very few after hours calls. Primary Duties: Provide and support safe, reliable, ergonomic systems and machines. Ensure equipment and layouts are compliant with current OSHA and RIA guidelines, local and national electrical codes. Write detailed technical specifications for projects, equipment, and processes. Resource management and support for maintenance personnel and vendors System\/Project design, costing and implementation from concept to completion to include capital improvement programs Coordinate all project controls\/electrical activities to ensure that project timing, quality, and cost targets are attained. Supervise and\/or direct contractors, suppliers, or other technical people as required. Perform hands\-on programming\/debug\/troubleshooting of numerous types of automation equipment. Conduct equipment training for plant or other personnel as required. Act at times as overall project manager on highly automated\/high controls\-content projects. Qualifications Required: Associate's Degree in Electrical Engineering, Industrial Engineering or other closely related field 3+ years of experience in a manufacturing environment performing Electrical Engineering or Automation Controls Engineering PLC programming and troubleshooting - Allen Bradley and Texas Instruments Problem Solving skills, motors & controls, and strong computer and network skills. CAD drawing capabilities - AutoCAD and Eplan Code understanding to include NEC, NFPA70 and OSHA Strong interpersonal and communication skills Salary and Benefits Salary range $95,000 \- $105,000 Paid time off (paid holidays and vacation) Medical, Dental, Vision and Life Insurance 401(k) Education assistance "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"45299258","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Automotive"},{"field Label":"Salary","uitype":1,"value":"$95,000 \- $105,000"},{"field Label":"Location","uitype":1,"value":"Greater Indianapolis, IN area"},{"field Label":"Education Level","uitype":2,"value":"Associates Degree"},{"field Label":"City","uitype":1,"value":"Shelbyville"},{"field Label":"State\/Province","uitype":1,"value":"Indiana"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"46176"}],"header Name":"Electrical Engineer","widget Id":"2**********0235012","is JobBoard":"false","user Id":"2**********0098003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"2**********5160167","FontSize":"15","location":"Shelbyville","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"2ea46ca6964cc6c4b4db5aa62dae6e8fdd267"}

Job DescriptionDescription: JC Ford - Tennessee is seeking top talent to take our organization to the next level! We are actively seeking an Electrical and Controls Engineer to join our team. Essential Functions: The Electrical & Controls Engineer coordinates closely with the Engineering and Operations staff to design, validate, commission, and troubleshoot electrical and control systems for automated food processing lines and equipment. The qualified candidate will be involved from initial concept through the entire life cycle of production lines and equipment featuring state of the art PLC-based controls with HMI panels. This position requires a high-energy individual with excellent teamwork. Must demonstrate solid judgment in technical problem-solving and analysis. This is a hands-on engineering position that demands effective collaboration with mechanical engineering, project management, fabrication, assembly, supply chain, sales, and customers. In this role, you will define, implement, and continuously improve best practices for electrical and controls engineering, including preparation of requirements documents, verification and validation plans, and written procedures. You will prepare risk assessments and take appropriate countermeasures to attain technical and project goals. And you will translate sales requirements into product specifications in accordance with our company product development process. Excellent verbal and written communication skills, detail orientation and analytical/problem solving skills are required. Must be a highly motivated self-starter with the ability to achieve results with minimal direction in a fast-paced environment. Requirements: Specific Responsibilities Include: Generation of electrical schematics, control panel layouts, IO lists, electrical bills of material, and P&ID diagrams using AutoCAD Electrical Programming using Rockwell CompactLogix and development of HMI interfaces using PanelView Design, verification and validation of safety circuits and programming of safety PLC's Design and implementation of networked systems Troubleshooting electrical, pneumatic, hydraulic and combustion control systems Verification and validation of designs to assure compliance with product specifications, regulatory requirements, international standards, and best practices Application of Design for Manufacturing & Assembly (DFMA) Development of test procedures, conduct product testing, and validate for production Development of Root Cause Analyses and Corrective Action Plans Application of FMEA and Risk Analysis to mitigate product risk Collaboration with electrical, controls and mechanical engineering team members to grow technical knowledge base and implement best practices Recommendation of various technology options or approaches for system, process, facility, or program improvements in terms of safety, performance, efficiency, and cost 10-20% travel to domestic and international customer locations as needed to support installation, commissioning, troubleshooting, and upgrading of production lines and equipment Collaboration with key suppliers to specify components that meet design requirements, diagnose, and resolve issues, and stay current with new technology and product advancements Delivery of presentations on technical findings and project status to cross functional teams and management Experience and Background: 3+ years of progressive experience in product development in a fast-paced environment Ability to manage multiple tasks and projects simultaneously with a high level of autonomy Must have solid technical writing and documentation skills Ability to analyze complex data Strong written and verbal language skills Solid understanding of electrical engineering principles, methodologies, and processes Experience in automated machinery design and manufacturing Effective problem-solving skills Expertise in electrical schematics using AutoCAD Electrical Knowledge and application of Ladder logic programming Effective use of engineering processes such as ECR/ECN Preferred Experience and Skills: Heavy capital equipment in the food industry Preparation of P&ID diagrams Communication systems, data logging and analysis Control of automated, PLC-controlled food processing equipment Designing and developing electromechanical assemblies and conveyor systems Design of linear motion driven systems and controls Design for Six Sigma, Lean Manufacturing, risk/hazard analysis and FMEA ISO 9001 and/or ISO/TS/ATF 16949 quality management ERP and PDM, preferably Autodesk Vault Communication in Spanish Education: B.S. in Electrical Engineering from ABET accredited university Physical Requirements The majority of the job function is performed in an office setting requiring normal safety precautions, but the job will also require from time to time to visit the production floor or customer job sites. Please see RU 91 attached. JC Ford Company is an equal opportunity employer and drug-free workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability (mental or physical), pregnancy, status as a parent, family medical history, genetic information, political affiliation, military service/protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. We will consider for employment, qualified applicants with criminal histories, consistent with the requirements of applicable federal, state, or local agencies.

JC Ford - Tennessee is seeking top talent to take our organization to the next level! We are actively seeking an Electrical and Controls Engineer to join our team. Essential Functions: The Electrical & Controls Engineer coordinates closely with the Engineering and Operations staff to design, validate, commission, and troubleshoot electrical and control systems for automated food processing lines and equipment. The qualified candidate will be involved from initial concept through the entire life cycle of production lines and equipment featuring state of the art PLC-based controls with HMI panels. This position requires a high-energy individual with excellent teamwork. Must demonstrate solid judgment in technical problem-solving and analysis. This is a hands-on engineering position that demands effective collaboration with mechanical engineering, project management, fabrication, assembly, supply chain, sales, and customers. In this role, you will define, implement, and continuously improve best practices for electrical and controls engineering, including preparation of requirements documents, verification and validation plans, and written procedures. You will prepare risk assessments and take appropriate countermeasures to attain technical and project goals. And you will translate sales requirements into product specifications in accordance with our company product development process. Excellent verbal and written communication skills, detail orientation and analytical/problem solving skills are required. Must be a highly motivated self-starter with the ability to achieve results with minimal direction in a fast-paced environment. Requirements Specific Responsibilities Include: Generation of electrical schematics, control panel layouts, IO lists, electrical bills of material, and P&ID diagrams using AutoCAD Electrical Programming using Rockwell CompactLogix and development of HMI interfaces using PanelView Design, verification and validation of safety circuits and programming of safety PLC's Design and implementation of networked systems Troubleshooting electrical, pneumatic, hydraulic and combustion control systems Verification and validation of designs to assure compliance with product specifications, regulatory requirements, international standards, and best practices Application of Design for Manufacturing & Assembly (DFMA) Development of test procedures, conduct product testing, and validate for production Development of Root Cause Analyses and Corrective Action Plans Application of FMEA and Risk Analysis to mitigate product risk Collaboration with electrical, controls and mechanical engineering team members to grow technical knowledge base and implement best practices Recommendation of various technology options or approaches for system, process, facility, or program improvements in terms of safety, performance, efficiency, and cost 10-20% travel to domestic and international customer locations as needed to support installation, commissioning, troubleshooting, and upgrading of production lines and equipment Collaboration with key suppliers to specify components that meet design requirements, diagnose, and resolve issues, and stay current with new technology and product advancements Delivery of presentations on technical findings and project status to cross functional teams and management Experience and Background: 3+ years of progressive experience in product development in a fast-paced environment Ability to manage multiple tasks and projects simultaneously with a high level of autonomy Must have solid technical writing and documentation skills Ability to analyze complex data Strong written and verbal language skills Solid understanding of electrical engineering principles, methodologies, and processes Experience in automated machinery design and manufacturing Effective problem-solving skills Expertise in electrical schematics using AutoCAD Electrical Knowledge and application of Ladder logic programming Effective use of engineering processes such as ECR/ECN Preferred Experience and Skills: Heavy capital equipment in the food industry Preparation of P&ID diagrams Communication systems, data logging and analysis Control of automated, PLC-controlled food processing equipment Designing and developing electromechanical assemblies and conveyor systems Design of linear motion driven systems and controls Design for Six Sigma, Lean Manufacturing, risk/hazard analysis and FMEA ISO 9001 and/or ISO/TS/ATF 16949 quality management ERP and PDM, preferably Autodesk Vault Communication in Spanish Education: B.S. in Electrical Engineering from ABET accredited university Physical Requirements The majority of the job function is performed in an office setting requiring normal safety precautions, but the job will also require from time to time to visit the production floor or customer job sites. Please see RU 91 attached. JC Ford Company is an equal opportunity employer and drug-free workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability (mental or physical), pregnancy, status as a parent, family medical history, genetic information, political affiliation, military service/protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. We will consider for employment, qualified applicants with criminal histories, consistent with the requirements of applicable federal, state, or local agencies.

Please review the information below, if you are interested click apply and complete all of the required tasks. If you run into any issues while trying to apply, please call our Human Resources Department at **************. Denham-Blythe Company is a people-focused, design-build construction company committed to providing the best possible construction service in the industry. We exceed expectations in order to earn clients' trust for life. Founded in 1976, Denham-Blythe has completed over 10,000 projects to date, with 90% of our projects with repeat clients. The Field Engineer is responsible for assisting the Superintendent, quality control, all construction site layout, project documentation, and effectively communicating between all parties of the construction process. Project safety and quality shall be continuously observed and improved upon as necessary. Essential Functions * Assists in the planning, designing, monitoring and managing of projects and programs for substantial new construction, renovation and improvement projects. * Assists in serving as a technical consultant concerning facilities planning, construction and maintenance for different categories of facilities. * Utilizes program planning and budgeting cycles, financial control and budget systems to accomplish programming, determine resources and perform long-range planning. * Reviews consultant-prepared design drawings, prepares technical specifications, and reviews engineering plans for compliance with numerous regulatory acts. * Assists in the evaluation of contract bids, makes recommendations to higher-level engineers regarding feasibility studies, and assists in the management of large-scale construction projects. * Uses construction inspection report data to prepare payment estimates as a recommendation for payment. * Performs site layout tasks through surveying methods and practices. * Provides and maintains vertical and horizontal survey control points using levels, total stations, etc. * Assists Superintendent in completing daily reports and recordkeeping. * Assists in the preparation of final as-built documents. * Performs quality control procedures to ensure project is in accordance with all plans and specifications. * Communicates items and issues in a clear manner to design personal and project management. * Assists in a variety of basic construction tasks at the job site related to general construction. * Other duties as assigned. Skills * Ability to read construction drawings and documents * Proficient in geometrical and mathematical calculations * Knowledge to perform layout and surveying * Good communicate skills both in writing and orally * Self-motivating and responsible * Ability to work as an effective member in a team environment * Must practice effective and clear recordkeeping practices Physical Demands The position lifts heavy objects, walks and stands for long periods of time and performs strenuous physical labor under adverse field conditions. The employee lifts, pushes, pulls or carries objects; uses abdominal and lower back muscles to provide support over time without fatigue; and effectively jumps, sprints or throws objects. The position requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination. The position requires the ability to quickly move arms and legs. Education and Experience * Bachelor's degree in Civil Engineering or Construction Management. Other Requirements * Must obtain level I ACI certification and Engineer in Training certification * Must be willing to submit to a Drug Screen and Background Check * Must be eligible for work in the United States #LI-DNI Denham-Blythe Company, Inc. is an Equal Opportunity Employer/Minorities/Females/Veterans/Disabled

Join our team turning abstract ideas into realities. Collaborate with industry experts to develop solutions to mission-critical challenges, such as NASA's return to the moon, the DoD's national security initiatives, international automotive manufacturers' development of fuel-efficient and electric vehicles, and the DoE's energy research. We tackle challenges in emerging technologies, cyber, intelligence, space exploration, energy transformation, and resiliency to ensure national security. As the world's thinkers, visionaries, and doers, we disrupt the status quo and affect real, meaningful change in how we provide solutions to our customers, operate our business, and support communities. Advanced Solutions specializes in the design, construction, and operation of unique and complex research and development facilities, including, as examples, wind tunnels (aerospace, automotive, and motorsports), rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities. Our projects span the automotive, motorsports, defense, nuclear, and aerospace markets. Recent clients include Audi, Boeing, BMW, Fiat Chrysler, Ford, Honda, General Motors, NASA, U.S. Air Force, U.S. Navy, U.S. Department of Energy, Volkswagen, confidential F1 motorsports clients, and many others in North America, Europe, and Asia. Advance Solutions is looking for an Entry Level Controls & Instrumentation Engineer to support projects ranging from small studies to multi-million dollar turn-key supply. A successful candidate must be team-oriented, organized, able to communicate to all levels of the organization, and meet deadlines in a fast-paced environment. Your work will be unique and challenging while supporting several projects in a dynamic and exciting environment. This position will provide you with an unparalleled opportunity to work with a team of motivated engineering and business professionals who work to ensure client satisfaction and deliver projects within scope, budget, and schedule. **Under the supervision of senior engineering staff, responsibilities include:** + Developing hardware assembly and wiring diagrams for control and data acquisition systems. + Implementing control system software designs that include control of temperature, pressure, humidity, flow, force, motion of mechanisms, system safety, human safety, and other advanced processes and electromechanical systems. + Developing control system software in PLC ladder logic, function block, HMI programming, etc. + Implementing interfaces to facility equipment using hardwired interfaces and industrial networks. + Applying closed loop controls methods, both classical and modern, to control continuously variable systems. + Supporting hardware assembly and fabrication. + Performing facility startup, checkout, and commissioning, both domestically and abroad. + Communicating with clients and management regarding project status. + Coordinating with other engineering disciplines and departments to ensure success. **Qualifications** + A Bachelor of Science in Mechanical, Chemical, Electrical, Mechatronics, Computer Engineering from an ABET accredited engineering program. + 0-2 years of experience in control or data acquisition system design, implementation, or commissioning. + Experience in software development with a high-level programming language such as C/C++/C# and with engineering application software tools such as LabVIEW, MATLAB and SIMULINK. Basic knowledge of PLC and HMI programming environments such as Rockwell Software Studio 5000, SIEMENS TIA Portal, and Emerson PAC ME is a plus. + An interest and background in electronics, instrumentation, control and data acquisition systems, PLCs, variable frequency drive systems, motion control systems, sensors and transmitters, actuators, PID control, and communication networks. + A solid math background to select and develop data uncertainty calculations, digital filter algorithms, control transfer function realizations, and process simulation. + Ability and willingness to work in a team environment to design, develop, and deliver control and data acquisition systems. Additionality must possess self-motivation and initiative to work alone when necessary. + A desire to develop ingenious alternative approaches to challenges, and drive innovation during all phases of projects. + US Citizenship **Criticality of Attendance** - Work hours are four 9 hour days and 4-hour Friday - Work arrangement is for work to be performed in the office (baseline) - Overtime to meet project schedules and milestones (10%-20%) - Field assignments that include 2nd or 3rd shift (5%-15%) - Field work attendance and punctuality are critical \#Techgroup

Are you interested in joining a company that blends a strong legacy with innovation, craftsmanship, and exceptional service? Then you're in the right place! The Field Engineer, under direct supervision, assists in all aspects of project management including, estimating, coordination of cost control, scheduling, reporting and document control activities. Assists in supporting positive client relationships. Responsibilities Can identify basic safety issues onsite and can notify superintendent of infractions. May need to assist in corrective action as needed. Can assist Superintendent in maintaining a Daily Reports and other necessary logs for progress reporting. Can assist superintendent in managing weekly manpower and manage electronic payroll input. Able to review contract documents, drawings and specification. Can assist superintendent with reviewing and enforcing subcontractor scope documents. Can assist superintendent with managing conflict resolution between different trades. Can review issues with design team, as directed by Superintendent. Assist Superintendent in ensuring high-quality installation in field. Maintains a higher level of computer skills. Able to write email communications and letters. Can store files both on the computer and on remote locations. Capable of creating basic Word and Excel documents, including the use of company templates/letterheads to produce documents for distribution both internally and externally. Capable of utilizing drawing markup software (i.e., Bluebeam, Goodreader, Sketchup, etc. Use Company's project management software, Procore, for tracking of information. When used on project, proficiently manage BIM software Can create short-term (3-week) look-ahead schedules. Can identify safety issues onsite and direct field forces on how to correct issue. Can perform a safety audit on your own project. Ensures that jobsite record/as-built drawings are maintained and updated regularly. Assist Superintendent in holding subcontractor meetings and create/distribute minutes to reflect what was discussed for record. Create and process submittals, RFi's and other standard forms of documentation. Support Superintendent with quality assurance/control in the field Reviews scopes created by Project Manager to ensure proper work is being installed by a subcontractor. Able to maintain a high level of client satisfaction with all aspects of the project to encourage repeat work. Qualifications Bachelor's degree in Construction Management, Engineering and a minimum of 1 year of experience or equivalent. General knowledge of construction principles preferred. Strong problem-solving and communication skills. Must be adaptable, a self-starter and results oriented. EEOC Statement Bulley & Andrews Rock City is an equal opportunity employer. We consider all applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or any other legally protected characteristics. We are committed to creating an inclusive, positive, and safe workplace.

**INTRODUCTION and WHAT YOU WILL DO (Job Responsibilities)** Are you passionate about problem solving? Are you excited by solving real business challenges through innovation? Are you dedicated to collaborating with a cross functional team to provide a first-class customer experience? If so, come join the Gasboy Field Engineer Team as we continue to experience explosive growth in our Gasboy Business Unit serving customers in the commercial and industrial fueling industry. **About the Opportunity** Reporting to the customer operations manager, the Gasboy Field Engineer will play a critical role in continuously improving the customer experience. As a key member of the service operations team, you will spend most of your time in the field, supporting end customers and authorized service contractors with new product adoption, project rollouts, training, data collection, testing and onsite service and troubleshooting. **Key Responsibilities** + Support the on-site field service activities as the resident expert on Gasboy products to provide the ultimate consumer experience by diagnosing performance related issues, determining root cause, corrective actions, confirming resolution and regularly communicate with all stakeholders on status + Make recommendations for the development of effective training resources and troubleshooting guides with the product support specialist team + Provide recommendations to the market service manager to add or remove authorized service network providers to ensure best in class field service support for our customers + Ensure authorized serviced technicians are properly trained according to department compliance, work, and customer security requirements + Lead regular scheduled field training sessions with key service partners and distributors in a market for continuing education opportunities and knowledge transfer + Communicate with stakeholders to convey drivers of operational impact of findings to ensure contact center consistency, process alignment, and process improvements + Act as the communication liaison between internal stakeholders, customers and service contractors regarding on-site findings and resolution + Support PSS/Engineering as requested for onsite testing, data collection, and trouble shooting + Support ad hoc Service Operation's needs (contract maintenance, projects, FMS, etc.) for site related challenges + Utilize technical and analytical skills to support technical assistance center as expert on Gasboy product solutions + Maintain compliance with safety standards according to Gilbarco Veeder-Root, Customer and Regulatory policies **WHO YOU ARE (Qualifications)** + Preferred: Associates or bachelor's degree in computer science or networking + Preferred: 5 years or more of service in petroleum equipment with manufacturers certifications + Preferred: A+ and Linux certified or have the ability to obtain the A+ and Linux certifications within 90 days + Knowledge of Microsoft Windows, Excel, and Networking required + Knowledge of Linux and SQL a plus + Road Warrior- travel is 75% or more for this role to include overnight + Extensive experience interfacing with end customers + Experience in performing training to small and large groups + Exceptional work ethic with excellent analytical/troubleshooting skills + Ability to lift 30+ pounds, walk medium distances, and be on your feet for 2+ hours + Basic Electrical and Hydraulic knowledge required. Advanced a plus + Strong oral and written communication skills **Relationships** This position will interface with the following: **Internal** + Supervisor, Technical Support + Gasboy Service Manager + Gasboy Product Support Specialists + Gasboy Field Engineers + Area Service Managers + Authorized Service Contractors and Service Managers + Commercial Account Managers + Customer Service Agents + Service and Field Engineers **External** + Distributor Partners + End Users + Authorized Service Contractors + Installers **Personal Trait Profile** + Ability to multitask + Customer centric + Enjoys problem solving and trouble shooting + Results driven + Ability to remain calm in stressful situations + Attention to detail + Strong organization and prioritization skills + Self-directed, motivated, and diligent (comfortable taking ownership) + Problem solver + Analytical + Pragmatic The base compensation range for this position is $70,000 to $95,000 per annum. Your actual base salary will be determined based upon numerous factors which may include relevant experience, skills, location (labor market data), credentials (education, certifications), and internal equity. For this specific role, you may be eligible for overtime in accordance with state laws. Overtime hours are not guaranteed. Vontier partners with you and your family on your health and wellness journey. Visit VontierBenefits.com to view our benefits. We offer a premium suite of health and wellness programs for you and your family, including medical, dental, vision, disability and life insurance. With programs for family planning from Maven Clinic to managing diabetes like Livongo, coverage for women's health, support for adult and elder care, paid parental leave, a generous 401(k) plan with matching company contributions, and more. Vontier is here for all stages of life. We also offer paid time off up to 15 days each year, 12 paid holidays (including 2 floating holidays), and paid sick leave.* **Disclaimer:** The salary, other compensation, and benefits information is accurate as of the date of this posting. Sick leave amount may vary based on state or local laws applicable to the applicant's geographic location. The Company reserves the right to modify this information at any time, subject to applicable law. **WHO IS GILBARCO VEEDER-ROOT** Gilbarco Veeder-Root, a Vontier company, is the worldwide technology leader for retail and commercial fueling operations, offering the broadest range of integrated solutions from the forecourt to the convenience store and head office. For over 150 years, Gilbarco has earned the trust of its customers by providing long-term partnership, uncompromising support, and proven reliability. Major product lines include fuel dispensers, tank gauges and fleet management systems. **WHO IS VONTIER** Vontier (NYSE: VNT) is a global industrial technology company uniting productivity, automation and multi-energy technologies to meet the needs of a rapidly evolving, more connected mobility ecosystem. Leveraging leading market positions, decades of domain expertise and unparalleled portfolio breadth, Vontier enables the way the world moves - delivering smart, safe and sustainable solutions to our customers and the planet. Vontier has a culture of continuous improvement and innovation built upon the foundation of the Vontier Business System and embraced by colleagues worldwide. Additional information about Vontier is available on the Company's website at *************** . **At Vontier, we empower you to steer your career in the direction of success with a dynamic, innovative, and inclusive environment.** Our commitment to personal growth, work-life balance, and collaboration fuels a culture where your contributions drive meaningful change. We provide the roadmap for continuous learning, allowing creativity to flourish and ideas to accelerate into impactful solutions that contribute to a sustainable future. Join our community of passionate people who work together to navigate challenges and seize opportunities. At Vontier, you are not on this journey alone-we are dedicated to equipping you with the tools and support needed to fuel your innovation, lead with impact, and thrive both personally and professionally. **Together, let's enable the way the world moves!** "Vontier companies are equal employment employers and evaluate qualified applicants without regard to race, color, national origin, religion, ancestry, sex (including pregnancy, childbirth and related medical conditions), age, marital status, sexual orientation, gender identity or expression, and other characteristics protected by law."

WHO WE ARE: Beyondsoft is a leading mid-sized business IT and consulting company that combines modern technologies and proven methodologies to tailor solutions that move your business forward. Our global head office is based in Singapore, and our team is made up of a diversely talented team of experts who thrive on innovation and pushing the bounds of technology to solve our customers' most pressing challenges. When it comes time to deliver, we set our sights on that sweet spot where brilliance, emerging technologies, best practices, and accountability converge. We have a global presence spanning four continents (North America, South America, Europe, and Asia). Our global network of talent and customer-centric engagement model enables us to provide top-quality services on an unprecedented scale. WHAT WE'RE ABOUT: We believe that collaboration, transparency, and accountability are the values that guide our business, our delivery, and our brand. Everyone has something to bring to the table, and we believe in working together with our peers and clients to leverage the best of one another in everything we do. When we proactively collaborate, business decisions become easier, innovation is greater, and outcomes are better. Our ability to achieve our mission and live out our values depends upon a diverse, equitable, and inclusive culture. So, we strive to foster a workplace where people have the respect, support, and voice they deserve, where innovative ideas flourish, and where people can unleash their brilliance. For more information regarding DEI at Beyondsoft, please go to ************************************** ADDITIONAL REQUIREMENT FOR REMOTE POSITIONS: For remote positions, all candidates must complete a video screen with our corporate recruiting team. Responsibilities POSITION SUMMARY: We are looking for an experienced Field Deployment Engineer to join our team to support one of top clients in [LOCATION TBD]. The engineer will directly work with client system engineers, local client logistics teams, and with other Field Deployment engineers remotely. Be responsible for deploying different types of robots to field, including preparation, data entry, data analysis, and post activities. This is a full-time, long term benefited position with competitive compensation WHAT YOU WILL BE DOING: Conduct regular risk assessments and provide recommendations for mitigating potential hazards Provide training and guidance to robotics operators, technicians, and other stakeholders on safe operating procedures and best practices Investigate incidents and near-misses, and develop corrective actions to prevent recurrence Collaborate with cross-functional teams to integrate safety considerations into robotics design, development, and deployment Service robotics equipment and ensure any issues are resolved in a timely manner to minimize downtime and maintain operational efficiency. Provisioning new robotics equipment and repositioning equipment across the data centers as needed. Enforcing tug utilization standards (how many racks = robotics needed) Pre-Deployment Phase Conduct site-by-site status assessments to ensure readiness for robotics deployment Develop and implement detailed project schedules by robotic type Create comprehensive training programs for operators, maintenance personnel, and supervisors Train operators on safe and efficient operation of new equipment Train personnel on equipment maintenance requirements and procedures Train supervisors on equipment operation, maintenance, and troubleshooting Introduce and deploy maintenance portal at each site with robotics Site Acceptance Testing Phase Collaborate with cross-functional teams to conduct site acceptance testing Identify and troubleshoot any issues that arise during testing Post-Deployment/Operationalization Phase Monitor and analyze key performance indicators (KPIs) such as: Equipment Utilization Rate Downtime, Maintenance Costs, Safety Incidents Throughput (original SAT vs operational in practice), Cycle Time (original SAT vs operational in practice) Vendor performance/Warranty (tracking of warranty work orders and estimated hours) Qualifications Bachelor's degree or higher in Computer Science, Computer Engineering, IT, or equivalent combination of education and experience Experience of Linux command line (at least understands basics) Basic ability to troubleshoot complex software / hardware configuration problems. Ability to function effectively in a fast-paced environment and manage continuously changing business needs; excellent time management skills required. PREFERRED QUALIFICATIONS: Experience of training program is a huge plus Any customer service skills is good to have Experience around safety programs is advantage Background in robotics-related tasks is preferred. DC/Server room experience is good to have WHAT WE HAVE TO OFFER: Because we know how important our people are to the success of our clients, it's a priority to make sure we stay committed to our employees and making Beyondsoft a great place to work. We take pride in offering competitive compensation and benefits along with a company culture that embodies continuous learning, growth, and training with a dedicated focus on employee satisfaction and work/life balance. A competitive pay range of $ 75,000 to $85,000 (depending on experience and location). 15 days per year of Paid Time Off (PTO). 8 paid holidays + 1 personal floating holiday 401(k) retirement plan with company match. Eligible employees (and their families) are offered the following company-sponsored benefits: Medical, dental, and vision insurance, health savings account (HSA), short-term and long-term disability, employee assistance plan (EAP), and basic life and AD&D insurance. Eligible employees (and their families) are offered the following voluntary employee-funded benefits: Health care flexible spending account, dependent care flexible spending account, commuter benefits, voluntary accident & critical injury coverage, voluntary long-term care coverage, and voluntary life and AD&D insurance. Beyondsoft provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type with regards to race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the full employee lifecycle up through and including termination.

WHO WE ARE: Beyondsoft is a leading mid-sized business IT and consulting company that combines modern technologies and proven methodologies to tailor solutions that move your business forward.Our global head office is based in Singapore, and our team is made up of a diversely talented team of experts who thrive on innovation and pushing the bounds of technology to solve our customers' most pressing challenges.When it comes time to deliver, we set our sights on that sweet spot where brilliance, emerging technologies, best practices, and accountability converge. We have a global presence spanning four continents (North America, South America, Europe, and Asia). Our global network of talent and customer-centric engagement model enables us to provide top-quality services on an unprecedented scale. WHAT WE'RE ABOUT: We believe that collaboration, transparency, and accountability are the values that guide our business, our delivery, and our brand. Everyone has something to bring to the table, and we believe in working together with our peers and clients to leverage the best of one another in everything we do. When we proactively collaborate, business decisions become easier, innovation is greater, and outcomes are better. Our ability to achieve our mission and live out our values depends upon a diverse, equitable, and inclusive culture. So, we strive to foster a workplace where people have the respect, support, and voice they deserve, where innovative ideas flourish, and where people can unleash their brilliance. For more information regarding DEI at Beyondsoft, please go to ************************************** ADDITIONAL REQUIREMENT FOR REMOTE POSITIONS: For remote positions, all candidates must complete a video screen with our corporate recruiting team. Responsibilities POSITION SUMMARY: We are looking for an experienced Field Deployment Engineer to join our team to support one of top clients in [LOCATION TBD]. The engineer will directly work with client system engineers, local client logistics teams, and with other Field Deployment engineers remotely. Be responsible for deploying different types of robots to field, including preparation, data entry, data analysis, and post activities. This is a full-time, long term benefited position with competitive compensation WHAT YOU WILL BE DOING: * Conduct regular risk assessments and provide recommendations for mitigating potential hazards * Provide training and guidance to robotics operators, technicians, and other stakeholders on safe operating procedures and best practices * Investigate incidents and near-misses, and develop corrective actions to prevent recurrence * Collaborate with cross-functional teams to integrate safety considerations into robotics design, development, and deployment * Service robotics equipment and ensure any issues are resolved in a timely manner to minimize downtime and maintain operational efficiency. * Provisioning new robotics equipment and repositioning equipment across the data centers as needed. Enforcing tug utilization standards (how many racks = robotics needed) Pre-Deployment Phase * Conduct site-by-site status assessments to ensure readiness for robotics deployment * Develop and implement detailed project schedules by robotic type * Create comprehensive training programs for operators, maintenance personnel, and supervisors * Train operators on safe and efficient operation of new equipment * Train personnel on equipment maintenance requirements and procedures * Train supervisors on equipment operation, maintenance, and troubleshooting * Introduce and deploy maintenance portal at each site with robotics Site Acceptance Testing Phase * Collaborate with cross-functional teams to conduct site acceptance testing * Identify and troubleshoot any issues that arise during testing Post-Deployment/Operationalization Phase * Monitor and analyze key performance indicators (KPIs) such as: * Equipment Utilization Rate * Downtime, Maintenance Costs, Safety Incidents * Throughput (original SAT vs operational in practice), Cycle Time (original SAT vs operational in practice) * Vendor performance/Warranty (tracking of warranty work orders and estimated hours) Qualifications * Bachelor's degree or higher in Computer Science, Computer Engineering, IT, or equivalent combination of education and experience * Experience of Linux command line (at least understands basics) * Basic ability to troubleshoot complex software / hardware configuration problems. * Ability to function effectively in a fast-paced environment and manage continuously changing business needs; excellent time management skills required. PREFERRED QUALIFICATIONS: * Experience of training program is a huge plus * Any customer service skills is good to have * Experience around safety programs is advantage * Background in robotics-related tasks is preferred. * DC/Server room experience is good to have WHAT WE HAVE TO OFFER: Because we know how important our people are to the success of our clients, it's a priority to make sure we stay committed to our employees and making Beyondsoft a great place to work. We take pride in offering competitive compensation and benefits along with a company culture that embodies continuous learning, growth, and training with a dedicated focus on employee satisfaction and work/life balance. * A competitive pay range of $ 75,000 to $85,000 (depending on experience and location). * 15 days per year of Paid Time Off (PTO). * 8 paid holidays + 1 personal floating holiday * 401(k) retirement plan with company match. * Eligible employees (and their families) are offered the following company-sponsored benefits: Medical, dental, and vision insurance, health savings account (HSA), short-term and long-term disability, employee assistance plan (EAP), and basic life and AD&D insurance. * Eligible employees (and their families) are offered the following voluntary employee-funded benefits: Health care flexible spending account, dependent care flexible spending account, commuter benefits, voluntary accident & critical injury coverage, voluntary long-term care coverage, and voluntary life and AD&D insurance. Beyondsoft provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type with regards to race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the full employee lifecycle up through and including termination.