Electrical engineer internship jobs in The Villages, FL - 64 jobs

Be a part of an innovative team and culture… Walt Disney Imagineering is the creative force that imagines, designs and brings to life all Disney theme parks, resorts, attractions and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. The approximate date of this internship is May/June 2026 to August/September 2026 and will be located in Orlando, FL. What You Will Do We are looking for an Electrical Engineering intern who is interested in working within the department responsible for electrical engineering including design, analysis, calculations and specifications for low and medium voltage 3-phase power distribution systems; emergency power, generators and UPS standby systems; lighting systems and controls; fire alarm systems; communication systems; and HVAC controls for an individual facility/attraction, area development, land, or theme park project. As an intern on the team you will have the opportunity to: Assist with electrical engineering design and calculation tasks for a single project under senior staff supervision Make decisions within established guidelines and provide, under close supervision, engineering design and analysis in support of the production of construction contract documents Required Qualifications & Skills General knowledge of the electrical engineering curriculum, with concentration in the areas of 3-phase power distribution and short circuit analysis Knowledge of electrical load and energy calculations and basic electrical engineering calculations Proficient in the use of 3D CAD technology Preferred Qualifications Active membership in IEEE, IES, or IAEI Education Currently enrolled as a Junior or higher attending an accredited college/university earning a degree in Electrical Engineering Eligibility Requirements & Program Information Candidates for this opportunity MUST meet all of the below requirements: Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application posting OR currently participating in a Disney College Program or Disney Internship Be at least 18 years of age Possess unrestricted work authorization Have not completed one year of continual employment on a Disney internship or program. Additional Information Able to provide reliable transportation to/from work Must be fully available for the duration of the internship We provide limited housing opportunities for Florida Based Professional Interns through American Campus Communities, for more information click here The pay rate for this role in Orlando, FL is $31 per hour for undergraduate students and $36 per hour for graduate level students. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: *************************************** Job Posting Segment: WDI Global Business Operations & Strategy Job Posting Primary Business: Design Mgmt & Engineering (WDI) Primary Job Posting Category: Engineering Intern Employment Type: Full time Primary City, State, Region, Postal Code: Lake Buena Vista, FL, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-20

Power your future with Qualus as a Substation Engineer through our Qualus University's 2026 Engineering Boot Camp! Our Engineering Boot Camp is a full-time Engineer I role paired with a structured training and development program built to accelerate your growth in the power industry. As a Boot Camp Engineer, you'll dive into focused classroom instruction led by seasoned Qualus engineers and industry experts, participate in immersive site visits, and gain hands-on substation safety and equipment training. You'll also receive guided preparation for the FE exam to help you build a strong technical foundation from day one. Whether you're drawn to Protection & Controls, Power System Studies, Substation Engineering, or Relay Settings, our four track options give you the runway to grow in the direction that excites you most. If you're ready to build real expertise, make real impact, and start a career with long-term potential, this is your first step. Apply today and join a program designed to turn early-career engineers into industry-ready professionals. As a Substation Design Engineer, you will work alongside Protection & Control Engineers to design physical substation layouts utilizing applicable codes and client standards. Typical designs to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, and AC and DC power systems. The 2026 Engineering Boot Camp, powered by Qualus University, will be starting on July 2026. As a program participant, you will receive an offer to be a full-time employee with Qualus. Responsibilities * Coordinate with Substation Design Engineers, Relay Settings Engineers, and other groups to ensure design concurrence. * Design Substations utilizing applicable codes and client standards. Typical design to include general arrangements, equipment and electrical layout, elevation views, cable trench, grounding studies, conduit drawings, grounding grids, lightning protection and grounding plans, AC/DC power systems, and bill of materials. * Complete calculations such as AC/DC load, bus spans, and ampacity. * Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates. * Working on project teams supporting all quality and project management goals. * Meeting all project deadlines and supporting the processes and procedures to meet deadlines. * Maintaining up-to-date technical skills related to the design of electrical substations and protection and control schematics for the electric utility power grid through on-the-job work and formal training. * Substation awareness and Safety consciousness. * Aptitude to quickly learn and apply test procedures for various types of substation equipment. * Good PC skills and the ability to support testing activities as required by the project lead. * Develop drawings and assist in the preparation of design packages using CAD/drafting skills. * Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed. * Consistently following established design standards and CAD drafting standards while assuring quality, accuracy, and completeness. * Identifying process improvement ideas and commuting ideas through appropriate management channels. Qualifications * BS Degree in Electrical Engineering from an ABET-accredited school (Mechanical Engineering degrees accepted for some roles) with a focus on power systems. * Ability to travel up to 10% of the time. * Microsoft Office product application. * Knowledge of AutoCAD and/or MicroStation. * Educational experience directly related to working with [medium to high voltage] electricity (preferred). * Must have the ability to work independently, and accurately, and have high attention to detail. * Strong communication skills and the ability to effectively discuss technical recommendations with customers. * Strong computer skills. #LI-JT1 Benefits & Compensation Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited to education, qualifications, prior relevant work experience and work location. Company Overview Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. EEO At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************.

**Power your future with Qualus as a Substation Engineer through our Qualus University's 2026 Engineering Boot Camp!** Our Engineering Boot Camp is a full-time Engineer I role paired with a structured training and development program built to accelerate your growth in the power industry. As a Boot Camp Engineer, you'll dive into focused classroom instruction led by seasoned Qualus engineers and industry experts, participate in immersive site visits, and gain hands-on substation safety and equipment training. You'll also receive guided preparation for the FE exam to help you build a strong technical foundation from day one. Whether you're drawn to Protection & Controls, Power System Studies, Substation Engineering, or Relay Settings, our four track options give you the runway to grow in the direction that excites you most. If you're ready to build real expertise, make real impact, and start a career with long-term potential, this is your first step. Apply today and join a program designed to turn early-career engineers into industry-ready professionals. **As a Substation Design Engineer,** you will work alongside Protection & Control Engineers to design physical substation layouts utilizing applicable codes and client standards. Typical designs to include general arrangement, equipment and electrical layout, elevation views, cable trench, grounding, conduit drawings, details, and AC and DC power systems. The 2026 Engineering Boot Camp, powered by Qualus University, will be starting on July 2026. As a program participant, you will receive an offer to be a full-time employee with Qualus. **Responsibilities** + Coordinate with Substation Design Engineers, Relay Settings Engineers, and other groups to ensure design concurrence. + Design Substations utilizing applicable codes and client standards. Typical design to include general arrangements, equipment and electrical layout, elevation views, cable trench, grounding studies, conduit drawings, grounding grids, lightning protection and grounding plans, AC/DC power systems, and bill of materials. + Complete calculations such as AC/DC load, bus spans, and ampacity. + Create equipment and material specifications for procurement of engineered equipment as well as development of design scope and cost estimates. + Working on project teams supporting all quality and project management goals. + Meeting all project deadlines and supporting the processes and procedures to meet deadlines. + Maintaining up-to-date technical skills related to the design of electrical substations and protection and control schematics for the electric utility power grid through on-the-job work and formal training. + Substation awareness and Safety consciousness. + Aptitude to quickly learn and apply test procedures for various types of substation equipment. + Good PC skills and the ability to support testing activities as required by the project lead. + Develop drawings and assist in the preparation of design packages using CAD/drafting skills. + Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed. + Consistently following established design standards and CAD drafting standards while assuring quality, accuracy, and completeness. + Identifying process improvement ideas and commuting ideas through appropriate management channels. **Qualifications** + BS Degree in Electrical Engineering from an ABET-accredited school (Mechanical Engineering degrees accepted for some roles) with a focus on power systems. + Ability to travel up to 10% of the time. + Microsoft Office product application. + Knowledge of AutoCAD and/or MicroStation. + Educational experience directly related to working with [medium to high voltage] electricity (preferred). + Must have the ability to work independently, and accurately, and have high attention to detail. + Strong communication skills and the ability to effectively discuss technical recommendations with customers. + Strong computer skills. \#LI-JT1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-FL-Lake Mary_ **ID** _2025-4583_ **Category** _Engineering & Advisory_ **Position Type** _Regular Full Time_ **Remote:** _No_

Job Description Responsible for designing electrical power distribution network for the auxiliary equipment of our Gas Turbine projects. Our voltage levels are primarily in the low-voltage side (600V and below) with implementation of equipment such as MCCs, Panelboards, LV Transformers, DC Systems and Batteries. Perform calculations, sizing of equipment (i.e.: breakers, overload devices, etc.), sizing of cables/conduits/equipment spacing, illumination level calculations, maintaining bill of materials, and other design duties required by complexity of project. Support electrical equipment specification (Motor Controls Centers, Power Supplies, DC systems). Interface with other disciplines to validate and support power plant design Support technical inquiries from customers, vendors and field personnel Use SmartPlant Electrical (SPEL) and SmartPlant Instrumentation (SPI) for electrical equipment deliverables production.

Wright-Pierce, a growing, award-winning, multi-discipline environmental engineering firm specializing in water, wastewater and civil infrastructure, is seeking a licensed Lead Electrical Engineer to support our Southeast region. This position entails evaluation, design and construction engineering for water/wastewater treatment, civil infrastructure and industrial facilities including low to medium voltage power distribution systems, process control systems, lighting systems, fire alarm systems, security systems and communications systems. Salary range is $85,000 - $140,000/yr. NOTE: Final salary is based on education, experience, certifications, and location. Responsibilities * Evaluation, design and construction engineering for water/wastewater treatment, civil infrastructure and industrial facilities including low to medium voltage power distribution systems, process control systems, lighting systems, fire alarm systems, security systems and communications systems. * Prepare technical writing including memoranda, letters, reports, specifications, and submittal reviews. * Proactively coordinate work with other design disciplines on multi-disciplinary projects to produce a fully coordinated set of bidding documents. * Develop construction cost estimates. * Perform site inspections for studies, design, and construction projects. * Perform field visits to review contractor's work and resolve field related issues. * Perform field visits to observe contractor's demonstration testing of electrical gear. * Mentor and delegate to staff. * Monitor budget status for assigned projects. * Assist with proposal development efforts for select project pursuits. Essential Functions * Effective written and verbal communication skills and interpersonal skills * Effective personal organization and time management skills * Able to build strong relationship with coworkers and clients * Able to work efficiently and independently on multiple projects while meeting budgets and schedule * Proficient with Microsoft Teams and Bluebeam * Committed to continual learning * Excellent attention to detail Experience * 8+ years of electrical engineering work experience; preferably in the water/wastewater field. * Working knowledge of the National Electric Code. * Experience using Bluebeam required. * Familiarity with industrial control system narratives and P&IDs considered a plus. * Experience using Revit/AutoCAD considered a plus. Certification * Professional Engineer license required Education * BS Degree in Electrical Engineering required Your Benefits Wright-Pierce's goal is to foster a culture of health and wellness. We accomplish this by creating a work environment that promotes healthy living, encourages volunteerism, and supports personal development and well-being. To achieve this goal, we offer a variety of benefits, some of which are highlighted below. Check out our full benefits overview for more. * Medical, dental, and vision insurance beginning on date of hire * Wellness program with fitness reimbursement * Mental health and well-being benefit * Paid volunteer hours * 401(k) match with employer match and profit-sharing contribution with no vesting period * Defined career development path, mentorship program, and Wright-Pierce University training program * Paid time off, paid and floating holidays, and paid parental leave * Flexible work schedules and hybrid work environment Best in Class Engagement Our recent employee engagement survey, conducted by The Employee Engagement Group, revealed a highly engaged workforce with 87% responding and 94% of respondents indicating they would recommend Wright-Pierce as a place to work. These results are best-in-class for the A/E/C industry and reflect our commitment to creating a positive work environment. The firm's top performing areas, based on employee feedback, include respect for others, opportunities to socialize, career opportunities, and life-work balance. Equal Employment Opportunity At Wright-Pierce we are committed to fostering, cultivating, and preserving a culture of diversity and inclusion. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, or any other characteristic protected by federal, state or local laws. We strongly encourage women, minorities, people with disabilities, and veterans to apply. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Sponsorship Available: At this time, we will not support sponsorship, i.e. H-1B or TN Visas for this position.

Luxus Build Who we are Luxus Build is a multidisciplinary architecture and engineering studio based in Florida, delivering integrated mechanical, electrical, plumbing, fire protection, technology/low-voltage, commissioning, and energy solutions. We're known for collaborative, client-first delivery and a culture that values mentorship, quality, and long-term relationships. Where we operate Headquartered in Florida with active work statewide. This role is based in Maitland, FL (Orlando area) and supports projects across the region; relocation may be considered. Markets we serve A diverse portfolio across education (K-12 and higher ed), commercial, hospitality, residential, civic/government, and healthcare. Culture & leadership Entrepreneurial, hands-on leaders who stay close to projects and clients. We emphasize ownership, transparency, professional growth, and delivering work that stands up to rigorous QA/QC and code requirements. Job Description: Electrical Engineer (PE) / Project Manager Location: Maitland, FL (Orlando area) - local strongly preferred; relocation considered Compensation: $90,000-$120,000 (DOE) Employment Type: Full-time The Opportunity Lead electrical design and project management for education and commercial buildings, coordinating across disciplines and with architects and owners. This PM-level role suits an Electrical PE with ~8-12 years in an MEP consulting environment who can own client interaction, run project meetings, and mentor junior staff. What You'll Do (Key Responsibilities) Own projects end-to-end: scope, schedule, budgets, design delivery, QA/QC, construction support. Lead multi-discipline coordination (mechanical, plumbing, FP, technology/low-voltage, commissioning); interface closely with architects and owners. Execute electrical systems design for commercial and institutional facilities (focus on medium-voltage distribution within facilities; low-voltage experience is a plus). Produce/review Revit models and construction documents; ensure drawing/spec quality and NEC/NFPA and Florida code compliance. Develop designs for interior/exterior lighting, standby/emergency power, surge & lightning protection, grounding/bonding. Plan and run internal/external project meetings; document decisions, risks, and action items. Coordinate with AHJs and utilities; support submittal reviews, RFIs, site observations, and punch. Mentor/supervise junior engineers/designers as the team grows. Required skills and experience B.S. in Electrical Engineering. Active Florida PE (or ability to obtain via comity within 1 year). 8-12 years of electrical design experience in an MEP consulting firm (PM-level responsibility). Demonstrated expertise in: Medium-voltage building distribution Lighting (interior/exterior), standby power, surge/lightning protection Revit (strong, hands-on proficiency); Word/Outlook/Excel familiarity Codes: Solid knowledge of NEC/NFPA and Florida/local electrical requirements (SREF/FBC exposure for K-12 is a plus). Strong client-facing communication skills-written, verbal, and presentation. Stability: Consistent tenure; we generally avoid resumes with many 1-2 year stints. Nice to Have K-12 schools design experience (strong preference) and/or higher ed, healthcare, aviation, or government facilities. Experience coordinating low-voltage/systems (security, communications) alongside power. Prior team leadership and experience mentoring junior staff. Why Luxus Build Integrated A/E practice with direct collaboration between disciplines. High-impact, visible projects in education and commercial markets. Growth and mentorship: lead projects, guide junior talent, and shape standards. Strong commitment to quality, client service, and long-term professional development.

- Coordinate internally with site managers, suppliers, and engineering teams to ensure resolution of issues. - Manage moderately complex site issues independently, such as resolving minor construction deviations or coordinating supplier clarifications. - Plan construction support activities for specific systems, ensuring integration with project schedule. - Observes and ensures construction practices as required for compliance of construction operations/execution with federal, state, and local codes, industry standards, company procedures, and contractual requirements. - Gather approved required documents and information to support the successful completion of relevant construction activities/requirements. Study and understand the project specifications, procedures, and relevant portions of the Contract. - Creation of erection and commissioning procedures to support Gas Turbine and auxiliary system ground up installation, and other areas as assigned. - Responsible for adhering to and promoting safe work practices. - Responsible for Technical tasks of assigned projects under limited supervision of Engineering Manager - Responsible for Providing Timely Solution for PAR (Project Action Request). Includes tracking, working with quality, project/process/design engineering, suppliers, Field TFA team and supply chain. - Examine drawings for completeness, detail, and accuracy as peer reviewer. Checks manufacturers' prints and coordinates between these and the company drawings - Participate in a work environment of openness, trust, communication, teamwork, innovation, and satisfaction. - Coordinate with Mitsubishi site teams, suppliers, quality teams, and contractors to ensure proper installation and commissioning of power plant electrical systems. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - Bachelor's degree (BS) in Engineering from college or university and five (5) years' experience with Gas Turbine; or, seven (7) years related experience with Gas Turbines. - Familiarity with Combined Cycle Power Plant Equipment is required. Experience with ISO procedures and OSHA safety requirements would be an asset - Understanding of Power plant equipment such as pumps, condensers, cooling towers, rotating equipment, turbines, material handling, water treatment, valves, and heat exchangers. - Ability to read, analyze, and interpret engineered drawings, technical procedures, supplier documentation, schedules, and material take-off. - Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, and customers. Strong understanding of spoken and written English. - Speaks Spanish, Portuguese and/or Japanese

Job Description Matern Professional Engineering is looking for an Electrical Engineer (PE) at its Maitland, FL office, to be involved with design and project management, not limited to K-12 Schools and Higher Educational facilities; commercial office buildings, airports, government facilities and hospital/healthcare facilities. Ideal candidate will have 8+ years experience in interior and exterior lighting, standby power systems, surge and lightning protection. Demonstrable experience with project management and team/discipline coordination. Must be able to multi-task and possess superior written and oral communication skills. Word, Outlook and Excel familiarity. Must have strong working knowledge of Revit. Must be knowledgeable of National/FL Electrical codes. BS degree in Electrical Engineering required. This position requires an existing FL PE or ability to obtain from another state within 1 year. Candidate must be able to pass criminal background checks, not limited to the Jessica Lunsford Act to be able to visit school sites and FBI for government buildings. EOE/M/F/Vet/Disability Drug-Free Workplace Job Posted by ApplicantPro

CPH is a multi-disciplined Engineering and Architectural design firm that ranks in the nation's Top 500 Design Firms by ENR Magazine. Electrical Engineer with 5+ years of experience in commercial and industrial design. This position may be eligible for hybrid flexibility. Hiring Bonus of up to $5,000 for selected candidate! Job Description: The Electrical Engineer designs, develops, analyzes, and implements electrical systems. This role includes electrical power and lighting calculations and design, load evaluations, equipment and distribution system sizing, failure analysis, risk assessment, and system installation. The Electrical Engineer works with project managers and teams to create design documents, including reports, drawings, specifications, cost estimates, and collaborates effectively with internal and external clients. Duties Include: * Design, develop, and implement integrated electrical systems from scratch. * Perform electrical calculations, including load analysis, breaker sizing, conduit and wire sizing, voltage drop, and fault current. * Conduct hazard analysis and develop effective mitigation strategies. * Ensure designs comply with applicable safety and regulatory standards. * Develop and document system configurations and design methodologies. * Create electrical design drawings, installation procedures, and engineering reports. * Oversee work of Electrical Designers, including drawings such as single-line diagrams, panel schedules, power plans, lighting plans, and installation details. Review design drawings, specifications, and reports for accuracy, completeness, and quality. * Assist in the evaluation of designs to meet operational and cost-effectiveness goals. * Support cross-functional teams, ensuring alignment on project objectives and timelines. * Ensure electrical designs comply with local codes, regulations, and industry standards. * Research and specify commercially available equipment to meet project requirements for electrical systems. * Interact with clients to understand project needs and address design issues or changes. * Help manage project timelines, resources, and budgets to ensure timely delivery. * Stay updated with industry trends and provide suggestions to improve design processes. * Perform other duties as assigned. Requirements: Education and Experience: * Bachelor's or Master's degree in Electrical Engineering. * Professional Engineering (PE) or Engineer-in-Training (EI) license. * Proficiency in REVIT is required. AutoCAD, Sketchup, and Adobe Suite experience is a plus. * Certified Project Manager (PMP), Electrician (EC), Registered Electrician (ER), Certified Electrical Specialty Contractor (ES), or Registered Electrical Specialty Contractor (ET) is a plus. Required Skills/Abilities: * Proficiency in electrical design software, such as AutoCAD, SolidWorks, Revit, or similar tools. * Proficiency in electrical analysis software, such as EasyPower, SKM PowerTools, ETAP, or similar tools. * Proficiency in lighting analysis software, such as ElumTools, Agi-32 or similar tools * Strong understanding of electrical systems, components, and design principles. * Ability to read and interpret technical drawings, specifications, and engineering data. * Proficiency in MS Office, including Word, Excel, and Outlook, and familiarity with Deltek Vision and Smartsheet or similar software platforms. * Strong project management and organizational skills. * Ability to exercise critical thinking and good independent judgment. * Ability to work independently as well as collaboratively with a team. * Excellent interpersonal and communication skills. * Ability to effectively multi-task and work on multiple projects while adhering to project schedules and budgets. * Flexibility in work schedule to accommodate project deadlines. * Detail-oriented, quality-conscious, reliable, and self-motivated. Compensation & Benefits * Dependent upon experience. * CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company. * Company Paid Life Insurance and Short-Term Disability. * 401K, Paid Personal Time Off, Paid Holidays, and Paid Paternal Leave CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

About Us: Coastline Power Solutions, otherwise known as Coastline, is an industry-leading specialty power systems integrator serving the power generation industry. Located in DeLand, Florida, we engineer and manufacture customized generator enclosures, fuel tanks, and trailers and provide a full suite of related products and services, including bi-fuel systems, Mitsubishi engines and parts, and more. We can also integrate and facilitate the testing of all customer-supplied and third-party equipment, enabling us to offer convenient turnkey solution options. Coastline engineered products are installed in critical applications throughout the United States and internationally, serving government agencies, the military, police and fire departments, hospitals, assisted living facilities, schools, data centers, etc. Given the essential nature of our customers' installations, we understand how important it is that valuable power system assets are safeguarded. Therefore, we ensure our products meet and exceed industry and code standards and are constructed to withstand even the harshest environmental conditions and stresses. Our state-certified, independent, lab-tested products are also continuously inspected to confirm that high-quality standards are consistently maintained in every product. Brief Description: This is a Full-time Electrical Engineer position at our DeLand, Florida location. We offer a fast-paced, professional environment. We emphasize great attitudes, teamwork, and commitment throughout the organization to accomplish this. Responsibilities: Produce Electrical drawings and schematics for customer review and approval Perform and review complex Electrical calculations Prepare Electrical design and production drawings Author technical documents, engineering reports, specifications, and work instructions Prepare calculations, bills of materials, and construction details In-process problem-solving through the production process Technical review of customer-furnished Electrical equipment upon receipt Preferred Qualifications/Skills: Demonstrated proficiency with AutoCAD Mechanical, Autodesk Inventor, Microsoft Office, and other related software applications Ability to communicate complex technical concepts to engineers, clients, internal production and support personnel Ability to build and sustain effective relationships with internal and external industry professionals Ability to work both independently and as a team member to solve problems and learn new technical skills Ability to work effectively in a fast-paced engineering atmosphere with a variety of assignments and competing demands Ability to effectively use various types of measuring equipment Ability to effectively collaborate with clients and coworkers Knowledge of electrical systems Knowledge of proper tolerancing, construction methods, and industrial engineering is a plus Knowledge of Lean Manufacturing is a plus Education/Experience: Bachelors in electrical engineering or Related Discipline is a plus A combination of Experience/ Education will be considered Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 40 hours a week Work Location: In person

An industry-leading construction and forensic consulting firm is seeking an Electrical Engineer to help design and develop innovative electrical systems and products at their Florida office. Your Day Includes: Resolving issues related to electrical systems during construction Evaluate system options, determining specifications, and preparing drawings. Performing final inspections and checking contractors' work for adherence to codes Developing rough order of magnitude estimates for projects Must Haves Bachelor's degree in electrical engineering from an accredited college or university. PE license 2-3 years of relevant work experience P.S. In addition to offering a comprehensive health, dental, and vision package, we also provide FSA savings program and Employee Stock Ownership Plan (ESOP). If you have the necessary qualifications and are excited about this opportunity, we encourage you to apply. We look forward to hearing from you. *Eligible for Blueprint Helpers referral program (find out more: blueprinthires.com/bphelpers)

Reports To: General Manager SUMMARY: Responsible for testing PCBAs (Printed Circuit Board Assemblies ie circuits), trouble-shooting failed circuits, documenting test results, breadboard new prototype customer designs, and analyzing design failures as detailed below. Uses test equipment noted below along with a microscope and soldering iron. Up to 50% of the time, employee will tend, manipulate, control and handle precision machinery, tools, objects and/or materials. Position requires reading/writing in English to understand complex material such as reading schematics and technical data sheets, instructional manuals, procedural manuals, warning labels, etc., and to record basic written information such as completing forms, and making engineering procedures. Responsibilities: * Testing * Test circuits using test fixtures with equipment including DMM, O-scope, LCR bridge, PCs, power supplies, etc.) * Fabricate and repair test fixtures * Trouble-shoot failed circuits * Analyze failures and document testing results * Software programing experience with understanding sufficient to support testing and for loading customer furnished firmware or software on programable logic devices * Design * Interpreting functional circuit block diagrams related to schematic designs * PCB layout using CAD * Evaluating test node coverage on PCBA designs * Manages prototypes built using customer designs with schematics and bill of materials * Write ATPs (Acceptance Test Procedures) from customer requirements documents * repair equipment/fixtures * Supervision * Supervise staff of two engineering technicians accomplishing the tasks delineated above * Collaborates closely with the QA Manager and General Manager on projects, processes, and people encompassing the above activities Requirements: Bachelor's Degree in Electrical Engineering with 5 years in a related field or an Associate Technical Degree with 10 years of experience in PCB layout and troubleshooting. Extensive direct PCBA experience with an Associates Technical Degree or equivalent and more than 10 years can substitute for BS degree. Additional skills that are a plus include knowing CAD software, SPICE Analysis, or LabView scripting. Ability to work in small groups internal and external to company. This position is very hands on working in a dynamic collaborative environment.

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Electrical Designer/Engineer to join our team! Responsibilities Design applicable lighting system Emergency lighting and egress systems Life - Safety building requirements Fire alarm, smoke detector and strobe/alarm design Follow Equipment and Systems specifications Knowledge/understanding of electrical building codes and NEC Responds to permit comments Review shop drawing submittals Site lighting photometrics Do basic circuiting and create panel schedules Position requires ability to run loads and the ability to produce power and lighting code calculations Conduct site visit surveys and reports Collaborate and Coordinate with other Engineering and Architectural disciplines Perform Quality Control and Quality Assurance of both peer and self designed projects Qualifications & Prior Experience 3-5 years in the design of building electrical systems required Knowledge of electrical and mechanical materials and systems and their application Any retail or grocery store design experience a plus Awareness of NEC codes and application to specific design Experience with power systems, lighting systems, and building control systems Strong communication skills required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Electrical Designer/Engineer to join our team! Responsibilities Design applicable lighting system Emergency lighting and egress systems Life - Safety building requirements Fire alarm, smoke detector and strobe/alarm design Follow Equipment and Systems specifications Knowledge/understanding of electrical building codes and NEC Responds to permit comments Review shop drawing submittals Site lighting photometrics Do basic circuiting and create panel schedules Position requires ability to run loads and the ability to produce power and lighting code calculations Conduct site visit surveys and reports Collaborate and Coordinate with other Engineering and Architectural disciplines Perform Quality Control and Quality Assurance of both peer and self designed projects Qualifications & Prior Experience 3-5 years in the design of building electrical systems required Knowledge of electrical and mechanical materials and systems and their application Any retail or grocery store design experience a plus Awareness of NEC codes and application to specific design Experience with power systems, lighting systems, and building control systems Strong communication skills required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

WHY JOIN THE AMES COMPANIES We have amazing Benefits! Medical, Dental, Vision, Life Insurance, Wellness, 401K, Holidays Employee Assistance Program, Vacation Days, Disability, and much more. WHO WE ARE The AMES Companies, headquartered in Lake Nona-Orlando, FL has a rich American history. The AMES story goes back to 1774, when Captain John Ames began making America's first shovels. AMES brand is the third oldest consumer brand in the country, and its tools helped build America for more than two hundred years. You can learn more about our history here. Our business lines include Home Organization, Lawn and Garden Tools, Outdoor Living, and Cleaning Tools. Our leading global brands are sold to homeowners and professionals involved in new construction, remodeling, and maintenance activities. To learn more about out business lines, visit our website: ********************************** WHO YOU ARE The Electrical Engineer is responsible for designing, maintaining, and improving electrical systems and equipment within the manufacturing facility. This role ensures compliance with safety standards, supports production efficiency, and drives continuous improvement initiatives, including PLC programming, robotics integration, Arc Flash safety, and Lockout/Tagout procedures. WHERE YOU WILL WORK In our ClosetMaid Ocala facility. A 600,000 square feet manufacturing and distribution facility. RESPONSIBILITIES Develop and maintain electrical systems for plant operations, including power distribution, control systems, and automation. Troubleshoot electrical issues and implement corrective actions to minimize downtime. Develop, modify, and maintain PLC programs for production equipment and automated systems. Integrate PLCs with HMIs, sensors, robotics, and other control devices to optimize performance. Configure and maintain robotic systems for material handling, assembly, and other automated processes. Perform diagnostics and updates on PLC and robotic systems to ensure reliability and efficiency. Document all PLC logic and robotic programming changes and maintain version control. Ensure all electrical and control work complies with local, state, and federal regulations, as well as company safety standards. Conduct Arc Flash hazard analysis and ensure proper labeling and PPE compliance. Provide Arc Flash training for maintenance and operations teams. Implement and enforce Lockout/Tagout (LOTO) procedures for electrical systems and train staff on proper execution. Conduct risk assessments and implement preventive measures. Lead electrical, automation, and robotics projects from concept through implementation, ensuring timelines and budgets are met. Collaborate with cross-functional teams on equipment upgrades and new installations. Identify opportunities to improve energy efficiency and reduce operational costs. Support Lean and Six Sigma initiatives related to electrical, automation, and robotics systems. Maintain accurate documentation of electrical systems, PLC programs, robotic configurations, and modifications. Train maintenance staff on electrical safety, troubleshooting, PLC basics, robotics operation, Arc Flash, and LOTO procedures. REQUIREMENTS Bachelor's degree in Electrical Engineering. 3+ years in an industrial or manufacturing environment preferred. Hands-on experience with PLC programming (Allen-Bradley, Siemens, or similar). Experience with robotic systems (Fanuc or similar). Familiarity with motor controls, automation systems, and industrial networking. Strong analytical and problem-solving skills. Proficiency in electrical design software, PLC programming tools, and robotic programming interfaces. Knowledge of NFPA 70E, NEC, OSHA standards, and LOTO requirements. ENVIRONMENTAL/PHYSICAL REQUIREMENTS Physical demands described here are representative of those that must be met to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. This position is located primarily in an office environment. At times the associate is required to sit for long periods of time. While performing the duties of this job, the associate may need the ability to lift and carry loads up to 50 pounds. Upon occasion, the associate may be exposed to a manufacturing environment and required to wear personal protective equipment. WORK AUTHORIZATION The AMES Companies will only employ those who are legally authorized to work in the United States.

About the Role & Program "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The approximate dates of this internship are June - December 2026. What You Will Do: Assist project Engineers - Civil, Structural, Mechanical, Plumbing, and Electrical, in all phases of project work, from drafting, on-site as-built documentation, design coordination with outside design consultants, field data collection, light design / production work, construction administration, commissioning, and closeout documentation for a variety of projects ranging in scope from minor rehabs to building new facilities.Required Qualifications & Skills: Demonstrated/proven strong leadership, technical and interpersonal skills. Self-starter with demonstrated initiative - able to handle multiple tasks and priorities. Availability to work various shifts commensurate with project requirements. Experience with Microsoft Office suite: Word, Excel, PowerPoint and Outlook. Ability to work under deadlines, on short notice and support extended/off-hours when needed to support project or resort engineering issue. Preferred Qualifications & Skills: Prior related work experience is desired, including co-op/intern programs with a focus on architecture, engineering, energy systems, energy engineering or construction, low voltage, underground utilities, distribution engineering. Experience working with AutoCAD, REVIT and/or BIM (Building Information Modeling), SKM, ETAP, HVAC, Lighting Control System, Power System Analysis, Emergency Generator, Emergency Power, Solar, Heat & Power Plants. Education: Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor's or Master's degree in electrical engineering, Electrical Design, Electrical Architecture. GPA of 3.0 or higher (no rounding) Preferred EducationCumulative GPA of 3.0 or higher (Note: Please, no rounding) as shown on a transcript. Eligibility Requirements & Program Information Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application OR currently participating in a Disney College Program or Disney Internship. Be at least 18 years of age Possess unrestricted work authorization Current Disney Interns, College, International, or Culinary Program Participants: You may only work for ONE consecutive year (12 months) in any combination of an internship and/or program. Additional Information Be compliant with The Disney Look appearance guidelines Fully available from Monday through Friday with occasional weekends or holidays pending project need, up to 40 hours each week, early mornings or late nights are a possibility, bulk of work time will be during traditional 8am-5pm Able to provide/have reliable transportation to/from work We provide limited housing opportunities for Florida Based Professional Interns through American Campus Communities, for more information click here The pay rate for this role in Orlando FL is $31 for undergraduate student per hour and $36 for graduate student per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: **************************************** Job Posting Segment: Worldwide Safety, Health, Engineer & Sourcing Job Posting Primary Business: Safety Assurance (WSHES) Primary Job Posting Category: Engineering Intern, Other Employment Type: Full time Primary City, State, Region, Postal Code: Lake Buena Vista, FL, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-26

Department MEP Employment Type Full Time Location Sanford, FL Workplace type Onsite Reporting To Sean McGlumphy, Jeff Deal, or Steve Becker depending on location of candidate Duties Include: Requirements: Compensation & Benefits About CPH CPH is a multi-disciplined design firm that's growing quickly across the country. Our diverse team of almost 400 individuals are the heartbeat of our company and the reason for our success. The unique contributions that people bring to our firm sets us apart and allows us to bring exceptional service to the communities and clients we serve. At CPH, we offer small company culture with a big company presence. Founded by three visionaries in 1981, CPH has grown over 40 years to serve a long list of public and private clients across a spectrum of markets. Our comprehensive offering of services and broad reach has provided CPH the opportunity to team with clients in Building Stronger Communities Together across the nation and throughout the Caribbean. CPH is a part of the Trilon Group of companies. Its mission is to bring together North America's best infrastructure consulting firms in a collaborative environment with a People-First focus to accelerate their ability to deliver smart and sustainable solutions to clients. Through the partnership with Trilon, CPH professionals have the opportunity to network and share best practices with a host of other professionals across the country. Our future is bright, and we need more talented professionals with an entrepreneurial spirit to grow with us! Could this be you?

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Electrical Designer/Engineer to join our team! Responsibilities Design applicable lighting system Emergency lighting and egress systems Life - Safety building requirements Fire alarm, smoke detector and strobe/alarm design Follow Equipment and Systems specifications Knowledge/understanding of electrical building codes and NEC Responds to permit comments Review shop drawing submittals Site lighting photometrics Do basic circuiting and create panel schedules Position requires ability to run loads and the ability to produce power and lighting code calculations Conduct site visit surveys and reports Collaborate and Coordinate with other Engineering and Architectural disciplines Perform Quality Control and Quality Assurance of both peer and self designed projects Qualifications & Prior Experience 3-5 years in the design of building electrical systems required Knowledge of electrical and mechanical materials and systems and their application Any retail or grocery store design experience a plus Awareness of NEC codes and application to specific design Experience with power systems, lighting systems, and building control systems Strong communication skills required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

About the Role & Program "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The approximate dates of this internship are June - December 2026. What You Will Do: Assist project Engineers - Civil, Structural, Mechanical, Plumbing, and Electrical, in all phases of project work, from drafting, on-site as-built documentation, design coordination with outside design consultants, field data collection, light design / production work, construction administration, commissioning, and closeout documentation for a variety of projects ranging in scope from minor rehabs to building new facilities. Required Qualifications & Skills: * Demonstrated/proven strong leadership, technical and interpersonal skills. * Self-starter with demonstrated initiative - able to handle multiple tasks and priorities. * Availability to work various shifts commensurate with project requirements. * Experience with Microsoft Office suite: Word, Excel, PowerPoint and Outlook. * Ability to work under deadlines, on short notice and support extended/off-hours when needed to support project or resort engineering issue. Preferred Qualifications & Skills: * Prior related work experience is desired, including co-op/intern programs with a focus on architecture, engineering, energy systems, energy engineering or construction, low voltage, underground utilities, distribution engineering. * Experience working with AutoCAD, REVIT and/or BIM (Building Information Modeling), SKM, ETAP, HVAC, Lighting Control System, Power System Analysis, Emergency Generator, Emergency Power, Solar, Heat & Power Plants. Education: * Currently enrolled as a Junior, Senior or Graduate student at an accredited college/university, earning a Bachelor's or Master's degree in electrical engineering, Electrical Design, Electrical Architecture. * GPA of 3.0 or higher (no rounding) * Preferred Education Cumulative GPA of 3.0 or higher (Note: Please, no rounding) as shown on a transcript. Eligibility Requirements & Program Information * Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application OR currently participating in a Disney College Program or Disney Internship. * Be at least 18 years of age * Possess unrestricted work authorization * Current Disney Interns, College, International, or Culinary Program Participants: You may only work for ONE consecutive year (12 months) in any combination of an internship and/or program. Additional Information * Be compliant with The Disney Look appearance guidelines * Fully available from Monday through Friday with occasional weekends or holidays pending project need, up to 40 hours each week, early mornings or late nights are a possibility, bulk of work time will be during traditional 8am-5pm * Able to provide/have reliable transportation to/from work * We provide limited housing opportunities for Florida Based Professional Interns through American Campus Communities, for more information click here The pay rate for this role in Orlando FL is $31 for undergraduate student per hour and $36 for graduate student per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit: ****************************************