Electrical engineer internship jobs in Walnut Creek, CA

Must have skills High-speed digital board design 25G+ SerDes Microprocessor-based reference design High-speed optics (10-25G+) FPGA / PCIe / Retimers / PHY components Hardware debugging (oscilloscope, analyzer, VNA) ======= High-Speed Hardware Design Engineer We are seeking a skilled High-Speed Hardware Design Engineer to lead the development of cutting-edge digital boards and systems. The ideal candidate will have hands-on experience with high-speed interfaces, optics, and advanced debugging tools. Key Responsibilities: Design and develop high-speed digital boards from concept to production. Work with 25G+ SerDes, high-speed optics (10-25G+), and microprocessor-based reference designs. Integrate and validate high-speed components including FPGAs, PHYs, Retimers, PCIe switches, and POLs. Perform hardware bring-up, signal integrity validation, and root-cause analysis using oscilloscopes, VNAs, and logic analyzers. Collaborate with cross-functional teams to ensure robust system performance. Develop and maintain automation scripts using Perl, Python, or similar languages. Preferred Qualifications: Proven experience in high-speed board design and debugging. Strong understanding of networking hardware and terminology. Proficiency in lab instrumentation and test setup.

Domain: Embedded Hardware, PCB Design, FPGA, High-Speed Systems, EMI/EMC Experience: 10+ years San Jose, CA Based - Lead end-to-end hardware development for FPGA/SoC-based systems, including architecture, schematic design, PCB review, board bring-up, debugging, compliance testing, and cross-functional collaboration. Key Responsibilities: Hardware Design: Architecture, schematic capture, PCB review, documentation System Integration: High-speed board bring-up, signal/power integrity troubleshooting Testing & Compliance: DVT/PVT, EMI/EMC design, certification coordination Vendor Interface: PCB fabrication, assembly, procurement Sustenance: RMA debugging, redesign for compliance Collaboration: Work with firmware, mechanical, and test teams Technical Skills: Tools: Allegro, Altium, Interfaces: USB, BLE, SPI, I2C, Ethernet, CAN, PCIe Lab Expertise: Oscilloscopes, Logic Analyzers, Signal Generators Qualifications: Bachelor's in Electronics/Communication (or related), strong debugging and documentation skills

Job Title: Electrical Design Engineer 4 Work Schedule: On-site Rate: $71, Based on experience. Responsibilities: Designs electrical parts, modules and subsystems to support the design of whole systems. Responsible for the complete design process, including requirements specification, feasibility studies, cost and scheduling, conducting various hand-on testing and analysis, such as circuit, timing, thermal/cooling, electrical loads; conceptual and detailed design using design tools (i.e. OrCAD, PSpice, etc...), detailed drawings, design review presentations, procurement of prototype parts, system integration, prototype testing, and handoff to manufacturing. These tasks will require working with other engineering groups such as ME, OE, SW, systems and manufacturing engineers to ensure flawless integration and test at the subsystem and system level. Develops the required supporting documentation, such as assembly and test procedures, and service manuals. Works closely with and manages suppliers to ensure all design requirements are specified and achieved. Addresses and resolves product issues thru the product phases. Has strong leadership, communication and problem solving skills. Minimum B.S. in electrical engineering 5 years experience Skills: Category Name Required Importance Experience Area of Expertise Electromechanical No 2 Area of Expertise Schematic Capture No 1 Areas of Expertise Circuit Design No 1 Areas of Expertise Electrical Troubleshooting No 1 Technical Skills Circuit Failure Mode Analysis No 1 Technical Skills Electrical Testing No 1 Technical Skills Schematic Development No 1 About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Lavanya Dommeti (********************* / *************** for more details.

We are looking for a junior, motivated and talented problem solver. The ideal candidate will be responsible for testing and assembling electrical and mechanical components into devices. They will also help design and manufacture our product, organize the lab and work with suppliers as needed. They should be able to make quality assurance checks in order to keep the product standard high. Responsibilities Evaluate electrical products and systems by designing testing methods Organize lab Test finished products and system capabilities Keep necessary equipment operational Contribute to team efforts by accomplishing related results Qualifications Bachelor's degree in Electrical Engineering or related field Have knowledge of sensors, mechanical parts and electronic boards Can solder electrical components on PCB Strong problem solving, technical, math and science skills Strong written and verbal communication

A leading IP recruiting firm in San Francisco is seeking an experienced patent attorney with expertise in patent preparation and prosecution in the electrical arts. Candidates should ideally have a BS degree in electrical engineering, excellent communication skills, and the ability to manage a large docket effectively. This role offers a unique opportunity to work with clients from various industries and advance your career in intellectual property. #J-18808-Ljbffr

Role: Hardware Design Engineer - (high-speed PCBs design and Validation) Hire Type: Full Time About the job you're considering Design and develop high-speed PCBs, perform schematic and board-level reviews, and lead system bring-up using diagnostic tools. Validate and debug hardware at the unit level, ensuring compliance with test plans and documenting root causes and corrective actions. Must have experience with at least two PCB designs. Your role · Design high speed PCBs · Perform schematic and board level reviews. · Bring up PCBs and systems using diagnostic software. · Perform unit level validation of boards and systems following published guideline and test plan. · Debug assigned issues and document root cause and corrective action. · Worked on at least 2 PCB designs Your skills and experience · 5+ years' experience in PCB and system level development preferably in the server/computer/network industry · Experience with lab bring up and design validation. · Knowledge of high speed SerDes (>1G) interfaces, high speed design and signal integrity principles · Knowledgeable in X86 architecture, and a very good understanding of control interfaces such as PCIe, MDIO, SPI, I2C · Knowledgeable with power delivery and distribution techniques · Knowledgeable with CPLDs and FPGAs · Hands on board design knowledge, familiar with design tools including Cadence Concept and Allegro · Experience collaborating with other disciplines, including Diagnostics software, mechanical, signal integrity, thermal, manufacturing. Good communications skills and ability to collaborate in a team environment. Life at Capgemini Capgemini supports all aspects of your well-being throughout the changing stages of your life and career. For eligible employees, we offer: · Flexible work · Healthcare including dental, vision, mental health, and well-being programs · Financial well-being programs such as 401(k) and Employee Share Ownership Plan · Paid time off and paid holidays · Paid parental leave · Family building benefits like adoption assistance, surrogacy, and cryopreservation · Social well-being benefits like subsidized back-up child/elder care and tutoring · Mentoring, coaching and learning programs · Employee Resource Groups · Disaster Relief About Capgemini Engineering World leader in engineering and R&D services, Capgemini Engineering combines its broad industry knowledge and cutting-edge technologies in digital and software to support the convergence of the physical and digital worlds. Coupled with the capabilities of the rest of the Group, it helps clients to accelerate their journey towards Intelligent Industry. Capgemini Engineering has 65,000 engineer and scientist team members in over 30 countries across sectors including Aeronautics, Space, Defense, Naval, Automotive, Rail, Infrastructure & Transportation, Energy, Utilities &Chemicals, Life Sciences, Communications, Semiconductor & Electronics, Industrial & Consumer, Software & Internet. Capgemini Engineering is an integral part of the Capgemini Group, a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem. The Group reported 2024 global revenues of €22.1 billion. Get the future you want | ***************** Capgemini discloses salary range information in compliance with state and local pay transparency obligations. The disclosed range represents the lowest to highest salary we, in good faith, believe we would pay for this role at the time of this posting, although we may ultimately pay more or less than the disclosed range, and the range may be modified in the future. The disclosed range takes into account the wide range of factors that are considered in making compensation decisions including, but not limited to, geographic location, relevant education, qualifications, certifications, experience, skills, seniority, performance, sales or revenue-based metrics, and business or organizational needs. At Capgemini, it is not typical for an individual to be hired at or near the top of the range for their role. The base salary range for the tagged location is $80,800 - $150,800 / year. This role may be eligible for other compensation including variable compensation, bonus, or commission. Full time regular employees are eligible for paid time off, medical/dental/vision insurance, 401(k), and any other benefits to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or any other form of compensation that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Disclaimer Capgemini is an Equal Opportunity Employer encouraging inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status or any other characteristic protected by law. This is a general description of the Duties, Responsibilities and Qualifications required for this position. Physical, mental, sensory or environmental demands may be referenced in an attempt to communicate the manner in which this position traditionally is performed. Whenever necessary to provide individuals with disabilities an equal employment opportunity, Capgemini will consider reasonable accommodations that might involve varying job requirements and/or changing the way this job is performed, provided that such accommodations do not pose an undue hardship. Capgemini is committed to providing reasonable accommodations during our recruitment process. If you need assistance or accommodation, please reach out to your recruiting contact. Please be aware that Capgemini may capture your image (video or screenshot) during the interview process and that image may be used for verification, including during the hiring and onboarding process. Click the following link for more information on your rights as an Applicant http://*****************/resources/equal-employment-opportunity-is-the-law Applicants for employment in the US must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the US by Capgemini.

Atmosic Technologies is seeking passionate Hardware Systems Engineers to drive the development of differentiated, ultra-low-power wireless connectivity solutions. The specific job title and responsibilities will be determined based on the candidate's level of experience. Responsibilities: Design and develop robust reference solutions leveraging Atmosic's cutting-edge low-power wireless technology. System-level optimization of all components (RF, analog, digital, and software) to achieve peak performance while minimizing power consumption. Execute detailed system-level testing and debug prototype solutions. Collaborate closely with diverse, experienced cross-functional teams (SoC, RF VLSI, Software) to deliver world-class products. Develop and implement comprehensive test plans to rigorously validate chip functionality and characterize silicon performance. Requirements: MS in Electrical Engineering or a closely related field is mandatory. Minimum of 2 years of relevant experience in the validation and debugging of wireless SoCs. Possesses strong analytical and advanced debugging skills. Solid understanding of wireless communication and System-on-a-Chip (SoC) architectures. Proficiency with standard lab equipment, including but not limited to spectrum analyzers, logic analyzers, oscilloscopes, and multimeters. Competence in scripting or programming, with a preference for Python or C/C++. Nice to Have: Knowledge of common SoC interface, bus, and wireless protocols (e.g. I2C, SPI, AHB, Bluetooth Low Energy) Familiarity with RTL design and verification Knowledge of pre-silicon validation using FPGA Location: San Jose, California, USA

Founding Hardware Engineer (Stealth Robotics Startup) On-Site • San Francisco, CA About Us We're a tiny, fast-moving team building autonomous systems for heavy industrial machines. We retrofit existing equipment with a plug-and-play autonomy kit that taps directly into machine controls and layers on a full perception + connectivity stack: multi-sensor vision, LiDAR, high-precision GNSS, IMU, and a low-latency tele-operation network. In just a few months, we've gone from first prototype to real machines operating on active job sites, with early recurring revenue and a growing pipeline of paid pilots. We're backed by top-tier early-stage investors along with a group of founder-operators who know what it takes to build in the real world. Our founding team has built and shipped hardware, software, and robotics systems before. We thrive where physical machinery, harsh environments, and rapid iteration collide. Why Join Us You want to work on problems that actually matter - fixing how the world builds things. Construction is the backbone of civilization, and it's currently broken. We're here to change that. You don't want a cushy robotics lab job. You want to build robots in the mud, on real sites, under real constraints. You'd rather spend a week living out of a dusty RV next to a machine you're debugging than polishing a slide deck. You want to see your designs move 20-50 tons of real hardware. You want to feel the stakes. You want teammates who operate at founder-level intensity and ownership. About You You're a hacker at heart - the kind of person who gets a prototype working before most people finish their planning doc. You've built something from scratch: a company, a product, a robot, a system - success not required, agency absolutely required. You work extremely hard, laugh often, and don't mind chaos. You prefer “figure it out now” to “wait for perfect requirements.” What You'll Own As a founding Hardware / Mechatronics Engineer, you'll design and build the core systems that enable remote operation, sensing, and autonomy assistance on industrial machines. You'll work across mechanical, electrical, and embedded disciplines, often all in the same day. System Design & Prototyping Architect and build tele-operation hardware systems, including power, compute, and control modules for machine retrofits. Sensor Integration Integrate and calibrate cameras, LiDAR, radar, GNSS, IMUs, and other sensors using interfaces like GMSL, CAN, and Ethernet. Electrical & Mechanical Integration Design robust wiring harnesses, brackets, mounts, and enclosures that survive real-world abuse. Communication Interfaces Implement and validate CAN, LIN, J1939, Serial, and Ethernet connections with both existing ECUs and custom control hardware. Manufacturing & DFM Work with vendors to bring designs from scrappy prototypes to reliable production, including DFM, testing, and validation. Testing & Validation Lead machine bring-up, HIL testing, and on-site debugging alongside software and autonomy engineers. Documentation & Design Produce schematics, harness drawings, CAD models, assembly docs, and anything else needed to build and scale the hardware. Compensation & Support Base: ~$250-380k Equity: ~1-3% Full health/dental/vision, relocation + visa support, downtown SF workspace with full electronics/mech prototyping tools, 401(k), high-spec laptop, and budget for any gear you need.

About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities: Develop and refine electrical system layouts, schematics, and specifications. Review and process equipment and system submittals to ensure compliance with project requirements. Prepare and modify drawings, ensuring accuracy and clarity in design documentation. Utilize AutoCAD, Revit, and engineering analysis software for system design and documentation. Conduct power system analysis, including short circuit, voltage drop, and arc flash studies. Perform load calculations, lighting level analysis, and energy efficiency assessments. Support equipment selection, panel schedules, and system coordination. Ensure all designs adhere to NEC, energy codes, and client-specific guidelines. Collaborate with multidisciplinary teams to integrate electrical designs into overall project plans. Attend meetings with clients, architects, and contractors to resolve design issues and refine project scope. Conduct site visits to evaluate existing electrical conditions and support field installations. Contribute to the continuous improvement of our design processes. Provide engineering support during construction to ensure successful project execution. Required Skills/Abilities: Strong knowledge of electrical engineering principles, including power distribution and lighting systems. Proficiency in AutoCAD, Revit, and engineering analysis software. Familiarity with NEC and other relevant electrical codes and standards. Ability to analyze and interpret electrical specifications and technical documents. Effective problem-solving skills and the ability to manage multiple tasks. Actively contribute to a collaborative team environment, where your expertise and innovative ideas are highly valued. Strong communication skills, both written and verbal. Education and Experience: Bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field. Minimum of 2 years of experience in electrical design or engineering within the construction industry. Engineer-In-Training (EIT) certification preferred, with encouragement to pursue Professional Engineer (PE) licensure. Experience with commercial, high-rise residential, or data center projects is appreciated. LEED AP certification is appreciated. Proficiency in Microsoft Office applications (Word, Excel, Outlook). Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Field Engineer - Heavy Civil - Iconic Landmark Project - California - $95,000 - $120,000 I'm partnering with one of the top-performing general contractors in the United States, recognized for delivering some of the most high-profile and technically challenging heavy civil projects in the industry. They are seeking a Field Engineer to join their team on an iconic California landmark project-a unique opportunity to gain hands-on field experience on major infrastructure works, including landmark bridges, transit systems, and large-scale aviation improvements. This role offers exceptional exposure to field operations, construction sequencing, and technical execution on a nationally recognized project. Salary: $95,000 - $120,000 (D.O.E) Sector: Heavy Civil / Infrastructure (Bridges, Transit, Aviation, Complex Civil Works) Why Join? Iconic Project Experience: Work directly on one of the most recognizable and ambitious infrastructure projects in the region. Accelerated Learning: Gain invaluable on-site exposure to means and methods, field engineering processes, and day-to-day project delivery. Strong Development Path: Build a clear trajectory toward roles such as Project Engineer and Superintendent. Respected Contractor: Join a GC widely known for its technical excellence, lean structure, and strong backlog of landmark projects. Interested? Apply directly or reach out to *************************************** for more details.

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. Summary As an Electrical Engineering Intern, you'll join AV's Test Equipment Engineering Team and contribute to the design, development, and testing of electrical systems for unmanned aircraft and advanced robotics. You'll assist in building and supporting test equipment, writing software, and troubleshooting systems - gaining valuable, real-world experience across the product development lifecycle. This is an exciting opportunity to apply your academic training in a high-tech, fast-paced environment while working alongside experienced engineers and mentors. Position Responsibilities * Assist in the design, development, and troubleshooting of test equipment for printed circuit board assemblies (PCBAs), subsystems, and full systems * Help develop and deploy test software to support hardware integration and validation * Support the maintenance and upgrade of test systems used during production * Participate in test plan creation, requirements documentation, and validation strategies * Assist in executing tests on power systems, avionics, and propulsion components (functional, performance, and environmental) * Learn and apply engineering best practices, processes, and documentation standards * Support hardware bring-up, test station calibration, and system verification * Work collaboratively with cross-functional teams including hardware, software, and systems engineers * Perform other related duties as assigned to support ongoing engineering efforts Basic Qualifications (Required Skills & Experience) * Currently pursuing a Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field * Academic or personal project experience in one or more of the following: * Power electronics, battery systems, or electric motors * Embedded systems, FPGA, or RF systems * Digital and analog circuit design * Familiarity with electrical protocols such as I2C, SPI, UART, USB, CAN, or LVDS * Basic programming knowledge in C, C++, or C# * Exposure to test equipment like oscilloscopes, multimeters, and power supplies * Strong analytical and troubleshooting skills * Effective communication skills and ability to work well in a team Preferred Qualifications & Competencies * Hands-on experience with PCB testing, debugging, or electronics prototyping * Exposure to Visual Studio, Git, or hardware/software integration environments * Familiarity with version control and defect tracking tools * Experience with scripting or automation for test procedures (e.g., Python) * Passion for aerospace, robotics, or defense-related systems * Demonstrated initiative, accountability, and a willingness to learn * Ability to manage time effectively and adapt in a fast-paced, team-oriented environment Physical Demands * Ability to work in an office and light manufacturing/test environment (Constant) * Required to sit, stand, and use computer equipment for extended periods (Frequent) * May be required to lift and carry up to 10 lbs. (Occasional) ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: * Candidates must be majoring in Electrical Engineering * Strong academic performance * Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. * Positions are available spring, summer, and fall semesters * Availability for multiple work terms is preferred * A valid driver's license is required * Concurrent enrollment in a degree seeking program * Military experience a plus * MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00015033 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Figure is a AI Robotics company developing a general purpose humanoid. Our Humanoid is designed for corporate tasks targeting labor shortages and jobs that are undesirable or unsafe. We are based in San Jose, CA and require 5 days/week in-office collaboration. It's time to build. We are looking for an Electrical Engineer Intern for Summer 2026 to support the design and test of critical hardware components. This internship is designed for students in their final year of an undergraduate or master's program, as well as recent graduates who are on track to complete their degree by the end of 2026, or the following year. Responsibilities: Design and test full or sub sections of PCBAs on the Humanoid like power distribution boards, battery management systems, sensing boards, motor controllers, or computer boards Support the review of design artifacts (schematics, layouts, bill of materials…) from your peers or external suppliers Support system integration and test activities by contributing to test execution and problem diagnostics and resolution Requirements: Undergraduate student (Senior) or recent graduate in Electrical Engineering or related field Minimum 10 weeks internship, 1 to 2 terms preferred Solid EE fundamentals with hands-on experience designing, building, and testing PCBAs Experience with design automation (EDA) tools, preferably Altium in both schematics and layout Experience with power electronics (motor driver, switch mode power supplies…), digital electronics (MCU, FPGA, Ethernet, USB, SPI, I2C…), and analog electronics (filters, ADC/DAC…) Strong verbal and written communication skills Bonus Qualifications: Experience using LTspice, Python, and Matlab Embedded programming of DSPs, microcontrollers, and FPGAs Basic understanding of mechanical design fundamentals The US hourly range for this internship position is between $35 - $45/hr. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Core Responsibilities Execute comprehensive Hardware Validation testing for new silicon, focusing specifically on Battery Chain ICs and Power Management ICs (PMICs). Develop, set up, and perform validation test plans for performance, reliability, and functional verification of power-related hardware. Analyze test results, identify hardware defects, debug issues at the component and system level, and collaborate with design engineers to propose and verify fixes. Set up and expertly operate standard EE lab equipment, including oscilloscopes, digital multimeters, electronic loads (Battery Load management), and data logging equipment. Conduct testing under various environmental conditions, requiring experience with and operation of temperature chambers. Document validation procedures, test results, and bug reports clearly and meticulously. Contribute to the continuous improvement of validation methodologies and test coverage. Required Skills & Experience 3-4 years of professional experience in Electrical Engineering, specifically in hardware validation or characterization. Solid foundation in Electrical Engineering (EE) principles and analog/digital circuit theory. Proven experience in validating Battery Chain ICs (e.g., fuel gauge, charging circuits) and Power Management ICs (PMICs). Hands-on expertise in using and interpreting measurements from essential lab equipment: Oscilloscope (High-speed signal capture and analysis) Multimeter (Precision voltage, current, and resistance measurement) Electronic Loads / Battery Load Management systems Data Logging equipment for extended test monitoring. Experience with temperature chamber operation and performing tests across a wide range of temperatures. Strong analytical, problem-solving, and debugging skills. Excellent written and verbal communication skills for cross-functional collaboration.

We are looking for a junior, motivated and talented problem solver. The ideal candidate will be responsible for testing and assembling electrical and mechanical components into devices. They will also help design and manufacture our product, organize the lab and work with suppliers as needed. They should be able to make quality assurance checks in order to keep the product standard high. Responsibilities Evaluate electrical products and systems by designing testing methods Organize lab Test finished products and system capabilities Keep necessary equipment operational Contribute to team efforts by accomplishing related results Qualifications Bachelor's degree in Electrical Engineering or related field Have knowledge of sensors, mechanical parts and electronic boards Can solder electrical components on PCB Strong problem solving, technical, math and science skills Strong written and verbal communication

Requirements Patent preparation and prosecution experience, either in-house or as outside counsel, specifically in the electrical arts (e.g., circuit design, medical devices, and consumer devices) A BS degree in electrical engineering is preferred, although candidates with other degrees will be considered Legal, industry, and/or academic experience in electrical engineering, particularly with machine learning, cloud computing/networking, wireless communications, cryptography, information security, robotics or distributed ledger is desirable Active bar admission in state where practicing Registered to practice before the USPTO Strong time management and organizational skills, including demonstrated ability to take ownership for, and efficiently manage, a large docket including meeting internal and external deadlines Familiarity with operations of large organizations with established patent programs, including international organizations Strong work ethic and commitment to being responsive to client needs Excellent writing, communication and interpersonal skills Ability to collaborate and work effectively with a variety of internal and external stakeholders Demonstrated ability working independently Summary Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our sole focus on intellectual property enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. Confidentiality At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest. #J-18808-Ljbffr

Founding Hardware Engineer (Stealth Robotics Startup) On-Site • San Francisco, CA About Us We're a tiny, fast-moving team building autonomous systems for heavy industrial machines. We retrofit existing equipment with a plug-and-play autonomy kit that taps directly into machine controls and layers on a full perception + connectivity stack: multi-sensor vision, LiDAR, high-precision GNSS, IMU, and a low-latency tele-operation network. In just a few months, we've gone from first prototype to real machines operating on active job sites, with early recurring revenue and a growing pipeline of paid pilots. We're backed by top-tier early-stage investors along with a group of founder-operators who know what it takes to build in the real world. Our founding team has built and shipped hardware, software, and robotics systems before. We thrive where physical machinery, harsh environments, and rapid iteration collide. Why Join Us You want to work on problems that actually matter - fixing how the world builds things. Construction is the backbone of civilization, and it's currently broken. We're here to change that. You don't want a cushy robotics lab job. You want to build robots in the mud, on real sites, under real constraints. You'd rather spend a week living out of a dusty RV next to a machine you're debugging than polishing a slide deck. You want to see your designs move 20-50 tons of real hardware. You want to feel the stakes. You want teammates who operate at founder-level intensity and ownership. About You You're a hacker at heart - the kind of person who gets a prototype working before most people finish their planning doc. You've built something from scratch: a company, a product, a robot, a system - success not required, agency absolutely required. You work extremely hard, laugh often, and don't mind chaos. You prefer “figure it out now” to “wait for perfect requirements.” What You'll Own As a founding Hardware / Mechatronics Engineer, you'll design and build the core systems that enable remote operation, sensing, and autonomy assistance on industrial machines. You'll work across mechanical, electrical, and embedded disciplines, often all in the same day. System Design & Prototyping Architect and build tele-operation hardware systems, including power, compute, and control modules for machine retrofits. Sensor Integration Integrate and calibrate cameras, LiDAR, radar, GNSS, IMUs, and other sensors using interfaces like GMSL, CAN, and Ethernet. Electrical & Mechanical Integration Design robust wiring harnesses, brackets, mounts, and enclosures that survive real-world abuse. Communication Interfaces Implement and validate CAN, LIN, J1939, Serial, and Ethernet connections with both existing ECUs and custom control hardware. Manufacturing & DFM Work with vendors to bring designs from scrappy prototypes to reliable production, including DFM, testing, and validation. Testing & Validation Lead machine bring-up, HIL testing, and on-site debugging alongside software and autonomy engineers. Documentation & Design Produce schematics, harness drawings, CAD models, assembly docs, and anything else needed to build and scale the hardware. Compensation & Support Base: ~$250-380k Equity: ~1-3% Full health/dental/vision, relocation + visa support, downtown SF workspace with full electronics/mech prototyping tools, 401(k), high-spec laptop, and budget for any gear you need.

Redwood Electric Group is looking for a detail-oriented and technically skilled Electrical PV Designer to support our project teams in the design and drafting of photovoltaic and energy storage systems. This role plays a critical part in ensuring the accuracy, efficiency, and code compliance of our electrical designs while collaborating closely with engineers, project managers, and construction teams. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities Develop electrical single-line diagrams for AC and DC PV systems. Design PV array layouts, considering site conditions, shading, and component options. Perform electrical calculations, including voltage drop, conductor sizing, and inverter loading. Select appropriate PV modules, inverters, combiners boxes, and other system components. Create detailed electrical drawings, including site plans, equipment layouts, and installation details. Ensure compliance with the California Electrical Code (CEC) and other relevant codes and standards. Utilize PV design and Autodesk software and to create accurate and efficient designs. Coordinate with structural engineers on mounting system design and integration. Collaborate with engineers, project managers, and construction teams to integrate electrical designs into overall project plans. Provide technical support during the installation and commissioning phases of PV projects. Stay up-to-date with the latest advancements in PV technology and industry best practices. Required Skills/Abilities Proficiency in AutoCAD, Helioscope, & PVsyst for electrical distribution and PV system layout. Familiarity with California Electrical Code and other relevant codes and standards. Strong problem-solving skills with an analytical approach to electrical system design. Knowledge of PV system components and distribution equipment. Ability to manage multiple projects and deadlines in a dynamic team environment. Effective verbal and written communication skills to collaborate across teams. Contribute to a team environment where your input is valued. Education and Experience Bachelor's degree in Electrical Engineering or a related field (preferred), or equivalent relevant experience. 1-2 years of experience of electrical design for a design-build electrical contractor or engineering firm. Proficiency in AutoCAD MEP. Revit is appreciated. Basic knowledge of Microsoft Office applications. Strong time management, communication, and interpersonal skills. FE (EIT certification) appreciated. LEED project experience appreciated. Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. **Summary** As an **Electrical Engineering Intern** , you'll join AV's Test Equipment Engineering Team and contribute to the design, development, and testing of electrical systems for unmanned aircraft and advanced robotics. You'll assist in building and supporting test equipment, writing software, and troubleshooting systems - gaining valuable, real-world experience across the product development lifecycle. This is an exciting opportunity to apply your academic training in a high-tech, fast-paced environment while working alongside experienced engineers and mentors. **Position Responsibilities** + Assist in the **design, development, and troubleshooting** of test equipment for printed circuit board assemblies (PCBAs), subsystems, and full systems + Help develop and deploy test software to support hardware integration and validation + Support the **maintenance and upgrade** of test systems used during production + Participate in **test plan creation** , requirements documentation, and validation strategies + Assist in executing tests on power systems, avionics, and propulsion components (functional, performance, and environmental) + Learn and apply **engineering best practices** , processes, and documentation standards + Support hardware bring-up, test station calibration, and system verification + Work collaboratively with cross-functional teams including hardware, software, and systems engineers + Perform other related duties as assigned to support ongoing engineering efforts **Basic Qualifications (Required Skills & Experience)** + **Currently pursuing a Bachelor's degree** in **Electrical Engineering** , **Computer Engineering** , or a related field + Academic or personal project experience in one or more of the following: + **Power electronics** , battery systems, or electric motors + **Embedded systems** , FPGA, or RF systems + **Digital and analog circuit design** + Familiarity with electrical protocols such as **I2C, SPI, UART, USB, CAN** , or **LVDS** + Basic programming knowledge in **C, C++** , or **C#** + Exposure to test equipment like oscilloscopes, multimeters, and power supplies + Strong analytical and troubleshooting skills + Effective communication skills and ability to work well in a team **Preferred Qualifications & Competencies** + Hands-on experience with PCB testing, debugging, or electronics prototyping + Exposure to Visual Studio, Git, or hardware/software integration environments + Familiarity with version control and defect tracking tools + Experience with scripting or automation for test procedures (e.g., Python) + Passion for aerospace, robotics, or defense-related systems + Demonstrated initiative, accountability, and a willingness to learn + Ability to manage time effectively and adapt in a fast-paced, team-oriented environment **Physical Demands** + Ability to work in an office and light manufacturing/test environment (Constant) + Required to sit, stand, and use computer equipment for extended periods (Frequent) + May be required to lift and carry up to 10 lbs. (Occasional) **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************