Electrical engineer internship jobs in Wyoming, MI - 74 jobs

Job DescriptionDescription: Demonstrate SoundOff Signal's Core Values in daily interactions with internal and external customers. Build and test PCB prototypes of Surface Mount and Though Hole Technology: PCB assembly validation testing to product specs. Troubleshoot and test prototypes. Work with Project Engineer to resolve issues Able to use PCB design software CadSoft's Eagle Altium Designer Assist with creation/maintenance of initial product Bills of Materials. Assist with product validation testing where needed. Able to read and follow SoundOff Signal Work Instructions. Able to perform job consistently and without excessive absenteeism or tardiness. Other duties as assigned. Must be enrolled in a Bachelor's of Electrical Engineering college program. Previous experience with Electronic assemblies and troubleshooting a plus. Able to read and understand an electrical schematic. Proficient in troubleshooting and repairing electronic assemblies, including SMT circuitry. Proficient using Multi-meters and Oscilloscopes Soldering skills. Proficiency of the basic Microsoft software packages including Word and Excel. Excellent written and oral communication skills. Ability to work with people. Able to multi-task in a fast-paced environment. Automotive Electronic wiring background beneficial. General mechanical aptitude in a shop environment (hand tools, light duty power tools, calipers, etc.) beneficial. Able to lift up to 35 lbs. Able to stand, sit, walk, bend, twist, rotate, and/or reach throughout an entire shift. Must be able to handle and work with small parts. Mostly office and electronics lab environment, occasional light manufacturing environment Fast-paced, team-oriented environment Low noise level in a temperature-controlled setting Some level of domestic and/or international travel may be required Mostly normal business hours with occasional need to flex hours Requirements:

PADNOS offers internship programs for students to make an impact on sustainability, as well as continue learning and growing towards their career. We recognize the importance of education and ability to learn from our past, present and future. We provide challenging environments for interns to learn what we have worked so hard to achieve in the last century, as well as see the potential for a brighter future. PADNOS is a full-service recycling company handling paper, plastic, metals and electronic recycling. We tailor recycling programs for consumer and industrial clients throughout the United States. PADNOS was founded over a century ago and continues to transform the recycling industry. The company has thrived as a family business through four generations and has grown to be a market leader and best in class innovator. Electrical Engineering Internship Summary: The Electrical Engineering Intern will be a supporting cast in our controls department with a primary focus on Optix integration. Project Outcomes: Successful implementation in site-wide Optix integration while working closely with our operations team to make equipment run smoothly and visually flowing. Electrical Engineering Internship Qualifications: Pursuing a bachelor's degree in Electrical Engineering Studio 5000 experience Optix Experience Proficient in Microsoft Office (Word, Excel, PowerPoint) SolidWorks Electrical Software Knowledge Demonstrated excellent professional verbal and written communication skills Attention to detail Ability to work on multiple projects simultaneously

Job Description Electrical Engineer/ Project Manager Eastmont/ Grand Rapids OR Detroit/ Troy Direct Hire/ Permanent Placement $100k - $150k Base, Full benefits, Flex/ Hybrid schedule, Bonus, Profit Sharing, etc. THE CLIENT This particular client is a mid-sized A&E Firm (200 ppl, 50 in EE) who work on a wide variety of projects, including: Healthcare, Education, Science & Technology, Sports stadiums, Mission Critical/ Data Centers, Hi-rise/ multi-unit residential, mixed-use, etc. OVERVIEW The ideal Candidate will lead project electrical engineer in the design, development and documentation of primary power, secondary power, lighting, fire alarm and other auxiliary systems on small, medium, and large complex projects. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance with NEC codes and standards • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators • Site visits, presentations for clients/ design review, site Surveys, respond to RFIs, review shop drawings • Revit, AutoCAD, SKM, AGI 32, MicroStation (a plus) • Degreed BSEE BSAE or equivalent • 5+ years Industry experience in the US • EIT, PE, LEED Preferred (a plus)

Job DescriptionJoin our team at TowerPinkster and open a new door to an amazing career! TowerPinkster, an architecture, engineering, and interior design firm based in Michigan, Indiana, and Kentucky, is looking for a talented skilled Electrical Designer. This position is responsible for the design of electrical systems for projects, efficient management of assigned projects, and coordination of project teams according to schedule. Position expectations and RESPONSIBILITIES: Assist the lead engineer and participate in the design of electrical systems including power distribution, lighting, lighting controls, coordinate with technology group for data and communication infrastructure, fire alarm, and nurse call to meet owner/client needs and code requirements. Provide assessment of existing building systems and report back to owner with recommendations on needed maintenance, available savings and/or rebates for upgrades. Provide electrical engineer design solutions, calculations, design documents, specifications, and project communications. Provide follow-through for designs: construction correspondence, observation, punch listing and close out. Participate, where requested, in client meetings. Coordinate your work with all disciplines and consultants. Review submittals, RFIs, and contractor proposed change orders. Adhere to project budgeted time and schedule. Collaborate with the team to share experiences, knowledge, skills, and lessons learned for continuous improvement. Mentor and train entry-level designers across multiple offices. Assist with electrical specifications. POSITION QUALIFICATIONS: Bachelor of Science in an Electrical Engineering or Architectural Engineering accredited program. 15 plus years of industry experience. Strong understanding of commercial building electrical systems. Experience with an A/E or MEP consulting firm is preferred. Knowledge and experience in Revit software, lighting calculation software and proficiency in spreadsheet is preferred. Act with integrity and trust. Possess a commitment to excellence. Work in a collaborative team environment. Work independently. Problem solving through root cause analysis and finding alternative solutions. Understand and effectively apply technical skills to the project. Clearly express ideas and thoughts both verbally and in written form. Complete communication, documentation, paperwork, and drawings on time. Sharpen and continuously improve technical skills. Write quality reports. Take responsibility for own actions and completion of tasks in an accurate manner. Spend time with clients on a regular basis to communicate progress. Respond to requests in a timely fashion. Good time management and commitment to deadlines. WHAT WE OFFER We take a holistic approach to ensure the wellbeing of our team members. TowerPinkster is proud to support its team members with a robust compensation and benefits package, which includes: Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing. National award-winning culture and a supportive work environment that empowers employees to stay healthy, fulfill their interests and passions, and balance work and life goals. A collaborative work environment along with many culture connection events and wellness activities, to include walking challenges, fitness challenges, book clubs, in-office chair massages, and more. We offer a Thrive program providing incentives up to $400.00 annually. Flexible work hours with a work-life balance program providing six additional days off per year, and a healthy paid time off program. A comprehensive benefits package including health, dental, vision, 401(k), life insurance, short-term and long-term disability benefits, and paid community service hours. Annual team training, professional development opportunities, and career growth planning. The opportunity to reach your career goals with an award-winning firm. We highly encourage licensure, certification, and professional organization memberships, which are fully paid. Continued educational opportunities and a tuition reimbursement program. Firm-paid life and wellness coach for individuals and families in partnership with Ulliance. TowerPinkster is a firm of architects, engineers, and interior designers committed to design integrity, quality, and environmental responsibility. Our doors opened in 1953 with just six people, and now we have more than 250 of the best employees in Michigan, Indiana, and Kentucky. At our firm, it's our people who make us different. We have the freedom to explore new ideas, the tools to create innovative strategies, and the talent to inspire our clients through interactive design. We strive to create a diverse, equitable, and inclusive culture that empowers each person to be their genuine self. We are committed to Diversity, Equity, and Inclusion. For more than 70 years, we have made significant contributions to our communities through our commitment to quality, sustainability, and equitable design. Our active DEI committee is focused on driving initiatives within three areas: people, purpose, and process. Our expertise and collaborative, client-centered approach means the best ideas rise to the top. TowerPinkster received the 2025 National 101 Best and Brightest Companies to Work for Award and the 2025 Best Firm Award from Zweig Group. We are proud of this achievement and are thankful for our client relationships, our generous communities, and all the employees who contribute to TowerPinkster's exciting and creative culture! Our supportive work environment helps employees reach their career goals, and we have fun doing it! ********************** We are an Equal Opportunity Employer Electrical designer Join our team at TowerPinkster and open a new door to an amazing career! TowerPinkster, an architecture, engineering, and interior design firm based in Michigan, Indiana, and Kentucky, is looking for a talented skilled Electrical Designer. This position is responsible for the design of electrical systems for projects, efficient management of assigned projects, and coordination of project teams according to schedule. Position expectations and RESPONSIBILITIES: Assist the lead engineer and participate in the design of electrical systems including power distribution, lighting, lighting controls, coordinate with technology group for data and communication infrastructure, fire alarm, and nurse call to meet owner/client needs and code requirements. Provide assessment of existing building systems and report back to owner with recommendations on needed maintenance, available savings and/or rebates for upgrades. Provide electrical engineer design solutions, calculations, design documents, specifications, and project communications. Provide follow-through for designs: construction correspondence, observation, punch listing and close out. Participate, where requested, in client meetings. Coordinate your work with all disciplines and consultants. Review submittals, RFIs, and contractor proposed change orders. Adhere to project budgeted time and schedule. Collaborate with the team to share experiences, knowledge, skills, and lessons learned for continuous improvement. Mentor and train entry-level designers across multiple offices. Assist with electrical specifications. POSITION QUALIFICATIONS: Bachelor of Science in an Electrical Engineering or Architectural Engineering accredited program. Basic understanding of commercial building electrical systems. Experience with an A/E or MEP consulting firm is preferred. Knowledge and experience in Revit software, lighting calculation software and proficiency in spreadsheet is preferred. Act with integrity and trust Possess a commitment to excellence. Work in a collaborative team environment. Work independently. Problem solving through root cause analysis and finding alternative solutions. Understand and effectively apply technical skills to the project. Clearly express ideas and thoughts both verbally and in written form. Complete communication, documentation, paperwork, and drawings on time. Sharpen and continuously improve technical skills. Write quality reports. Take responsibility for own actions and completion of tasks in an accurate manner. Spend time with clients on a regular basis to communicate progress. Respond to requests in a timely fashion. Good time management and commitment to deadlines. WHAT WE OFFER We take a holistic approach to ensure the wellbeing of our team members. TowerPinkster is proud to support its team members with a robust compensation and benefits package, which includes: Industry-leading compensation package, including paid overtime, performance bonuses, and profit sharing. National award-winning culture and a supportive work environment that empowers employees to stay healthy, fulfill their interests and passions, and balance work and life goals. A collaborative work environment along with many culture connection events and wellness activities, to include walking challenges, fitness challenges, book clubs, in-office chair massages, and more. We offer a Thrive program providing incentives up to $400.00 annually. Flexible work hours with a work-life balance program providing six additional days off per year, and a healthy paid time off program. A comprehensive benefits package including health, dental, vision, 401(k), life insurance, short-term and long-term disability benefits, and paid community service hours. Annual team training, professional development opportunities, and career growth planning. The opportunity to reach your career goals with an award-winning firm. We highly encourage licensure, certification, and professional organization memberships, which are fully paid. Continued educational opportunities and a tuition reimbursement program. Firm-paid life and wellness coach for individuals and families in partnership with Ulliance. TowerPinkster is a firm of architects, engineers, and interior designers committed to design integrity, quality, and environmental responsibility. Our doors opened in 1953 with just six people, and now we have more than 250 of the best employees in Michigan, Indiana, and Kentucky. At our firm, it's our people who make us different. We have the freedom to explore new ideas, the tools to create innovative strategies, and the talent to inspire our clients through interactive design. We strive to create a diverse, equitable, and inclusive culture that empowers each person to be their genuine self. We are committed to Diversity, Equity, and Inclusion. For more than 70 years, we have made significant contributions to our communities through our commitment to quality, sustainability, and equitable design. Our active DEI committee is focused on driving initiatives within three areas: people, purpose, and process. Our expertise and collaborative, client-centered approach means the best ideas rise to the top. TowerPinkster received the 2025 National 101 Best and Brightest Companies to Work for Award and the 2025 Best Firm Award from Zweig Group. We are proud of this achievement and are thankful for our client relationships, our generous communities, and all the employees who contribute to TowerPinkster's exciting and creative culture! Our supportive work environment helps employees reach their career goals, and we have fun doing it! ********************** We are an Equal Opportunity Employer Powered by JazzHR IXP1iDIy9O

Job DescriptionThe Electrical Engineer ideal candidate has significant experience and background in Electrical Engineering / design capable of executing the core responsibilities listed below. Responsibilities: Support medium scope projects through the detail design and implementation phase. This includes development of BOM generation, electrical control panel phasing plans, Electrical Engineering work plans, and design approval packages Supporting Project Engineer during transition from Detailed Design to Final Engineering Reviewing and providing Electrical Engineering input to Description of Operation (DOO) & Functional Specification (FSD) documentation Providing Electrical Engineering input for implementation plan Developing Electrical Engineering work plan to ensure successful project milestone achievements Leading Controls Layout review meetings with internal teams and Client. Supporting Project Engineer to achieve design acceptance Electrical device layout package Control panel fabrication package Electrical installation package Attending Client meetings as required Utilizing AutoCAD and AutoCAD Electrical for drawings Qualifications: 4-year engineering degree in Electrical Engineering (or similar engineering program) from an accredited college plus 3-5 years of relevant work experience Conveyor control process experience (photoeyes, solenoids, variable frequency drive, line scanner, print and apply application) Advanced collaboration and communication skills (written and verbal communication) Proficient in the use of AutoCAD, AutoCAD Electrical, Promis-e, or E-Plan for electrical design Desired Qualifications: Experience managing Engineering projects requiring collaboration between multiple Engineering work streams UL, NEC, NFPA, OSHA design requirements 480VAC motor control panel design experience Strong comprehension of Profibus, Profinet, Ethernet IP, network design and requirements

About Acron Aviation: Acron Aviation is a global leader in commercial aviation solutions - designed, engineered, and delivered by a team of passionate innovators redefining what's possible in flight. From advanced avionics and flight data intelligence to world-class simulation and pilot training, we support aircraft operators and OEMs with the technology and expertise to fly safer, smarter, and more efficiently. Now, with a bold new identity, we're building on a legacy of aviation excellence - unleashing fresh energy, modern thinking, and a customer-first mindset to meet the demands of today's rapidly evolving aerospace industry. Welcome to Acron Aviation - where the future takes flight! Job Description: As a Specialist Electrical Engineer within our Surveillance product line, you are focused on developing TCAS and transponder radios, contributing to the electrical engineering discipline through initial concept generation, design, qualification, and lifecycle management. You will interact with business development and all engineering functions. You will be involved with multidisciplinary project teams involving mechanical, electrical digital/analog, RF, firmware, and software engineering in planning, designing, prototyping, documenting, and testing of avionics transponders, RF, and sensor-based systems. Design focus will include surveillance avionics for Air Transport, as well as General Aviation and emerging platforms such as Urban Air Mobility (UAM) eVTOL aircraft. Essential Functions: · Conceptualize, design, integrate, and qualify digital, analog, and power circuitry, with supplemental RF principles, in the avionics realm. · Design circuits with microprocessors, memory, Ethernet, SPI, I2C, high-speed busses including PCIE, and various avionics interfaces. · Proficiency in electrical schematic generation and review. Support for and review of CAD layout (preferred skills with Altium). · Generate design documents including HRDs, HDDs, and HCIAs. Provide inputs to generate certification documents such as PHACs. · Work effectively designing individual circuits, aircraft system architectures, and everything in between. · Familiarity with electrical analysis tools for power distribution, stress analysis, and other relevant simulations. · Participate in the proposal process for programs with EE requirements by estimating tasks, identifying risk and planning development. · Effectively communicate across multiple technical teams. · Communicate directly with customers, in person or virtually, to understand their problems and formulate actionable solutions. · Other duties as assigned. · Travel up to 10%. Qualifications: · Bachelor's Degree in Electrical Engineering or Computer Engineering and minimum 5 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. · Minimum 2 years' experience with electrical hardware design (aerospace applications preferred). · Hands on experience designing and developing avionics products, RF, or sensor systems. Preferred Additional Skills: · Working knowledge of at least one software language (python or C++ desirable) · Experience with and an understanding of aerospace systems, especially in the development of integrated hardware/software products · Exposure to Model-Based Systems Engineering · Awareness of FPGA/firmware development requirements as they impact electrical design · Experience with RTOS integration and understanding of its implications on hardware design · Practical understanding of the complexities of RF design, especially in L-band frequency range · Excellent people skills, with experience leading and collaborating in a multi-disciplinary, diverse, and dynamic team environment. · Excellent communication skills (written, verbal, & presentation) · Knowledge of DO-160, DO-178, and DO-254 · Experience with Design to Cost and Design for Manufacturability · Experience effectively supporting production and test of products in a different geographic location · Demonstrated ability to handle multiple programs and responsibilities simultaneously · Ability to operate and identify appropriate path forward with minimal oversight · Pilot License or Part 107 certificate

The mid-level Electrical Engineer II supports the design and integration of control systems for industrial material-handling solutions and production lines. This role utilizes engineering tools and processes in the planning, design, engineering, and implementation of controls engineering equipment. DUTIES AND RESPONSIBILITIES Creates and maintains controls engineering and design documentation, including sensor/actuator layouts, controls component order lists, electrical drawings, motor lists, etc. Cross-references controls components, creates TGW part numbers, and orders necessary controls components in designated software tools (e.g. Navision). Assists with controls installation request-for-quote (RFQ) process. Provides technical support to Project Engineering, Electrical and Mechanical Installation, Controls Commissioning, and other internal teams involved in installation and commissioning of TGW equipment. Specify, clarify, and document the controls interfaces for third-party equipment, while supporting the controls processes. Performs other duties as assigned. REQUIREMENTS Education: Bachelor's degree in Controls-related field (Electrical Engineering, Engineering Technology, Computer Engineering) or equivalent work experience. Experience: Two (2) or more years of Controls or Electrical Engineering experience in industrial or material-handling environment. Travel: Up to 20% travel, as required. Skills & Abilities Solid understanding of electrical and mechanical principles, with the ability to read e-drawings and AutoCAD drawings. Thorough knowledge of industrial automation and control systems. Understanding of full design-to-production project lifecycles. Proficiency with Microsoft Office Suite, including Word, Excel, and PowerPoint Physical Requirements Ability to remain stationary at a desk for prolonged periods of time. Ability to go to site frequently and move safely around industrial and/or warehouse environment. Ability to lift and carry supplies up to 25 pounds at a time. Ability to operate computers, tablets, phones, and other electronic devices. Ability to communicate with others verbally and in writing, on a frequent basis. Ability to tolerate exposure to job site temperature fluctuations due to seasonal weather in geographic region. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other Requirements This position may require work at TGW customer sites. TGW's customers may require background checks before accessing their sites. Refusal to participate in a customer-required background check may result in a customer barring access and a subsequent reduction in work. Equal Opportunity Employer TGW Systems Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionSalary: At E3M Solutions, we design and continuously optimize at the intersection of energy and engineering. Our integrated approach delivers better systems, better operations, and better long-term outcomes for the organizations we serve. We are problem-solvers, collaborators, and trusted partners. If youre passionate about problem-solving, driving sustainability, and making a tangible impact on each project, E3M Solutions offers a dynamic environment where you can grow, innovate, and help shape the future of engineering. Core Values Focus: At E3M Solutions, we are consistently and proactively focused on our company culture, how our team is the pivot point of the culture and how it reflects to our clients through our Core Values. Capable - We are experts in our field as evident through our quality, approach, and communication. Adaptable - We are creative thinkers and doers not locked into the way things have always been done Responsible - We strive to balance financial sustainability, environmental responsibility, and the impact it leaves on our clients and the greater community Relational - We prioritize connections knowing at the core, relationships matter Unified - We utilize our collective strengths to work as one team with and for our clients Team Player Attitude: We are looking for someone who shows up with the skills to contribute, the flexibility to adapt, and the mindset to put the team first. They take responsibility for their work, build strong relationships, and help create a unified, supportive culture where everyone can succeed together. Position Description: The Electrical Engineer will play a key role in the ongoing growth of the E3M Solutions Engineering team, contributing to both internal turn-key projects and external engineering efforts, including design/build, design/assist, and bid/spec projects. Accountabilities: Deliver high-quality designs that meet codes and client needs Coordinate system integration with other disciplines Designing sustainable solutions while maintaining fiscal responsibility and meeting client expectations Communicate to clients and stakeholders clearly, concisely and timely Own your passion for continuous development and project accountability Team Responsibilities: As a valued member of our team, you are expected to embody our core values in your day-to-day work and interactions. These responsibilities are guiding principles for how we work, grow, and succeed as a team. Strive to do your best work, and help others do the same. Things change within projects and thats okay. Be ready to shift gears and respond to what clients or teammates need with professionalism and a positive attitude. Were better when were connected. Invest in your relationshipswith the team, with clients, and in the industry. Good communication, collaboration and trust go a long way. Technical Responsibilities: Prepares system layouts, detailed drawings, and schematics for electrical systems including, but not limited to, the following: Electrical Distribution Systems Grounding and Bonding Systems Lighting & Lighting Controls DDC Controls Systems & VFD/VSDs Generator & Emergency Power Systems Alternative Energy Systems Review shop drawings for conformance to plans and specifications Occasionally visits job sites to verify existing conditions and observe construction progress. Assist in maintaining standards & tools for engineering Participate in conceptual development meetings with E3M team, clients or contractors Work in R&D efforts on new technologies and opportunities Perform other tasks and items necessary in a small business Position Requirements: Professional Engineering License (PE) or Engineering in Training (EIT Bachelors Degree in Electrical Engineering 5+ years of relevant experience Strong knowledge of electrical and energy codes and standards. AutoCAD & Revit Proficiency Proficiency in Microsoft Products (Word, Excel, etc) & Bluebeam Revu EasyPower & Visual Lighting Modeling Experience Certified Energy Manager (CEM) Preferred

The Electrical Designer is responsible for electrical engineering design and the ability to create final construction drawings throughout the entire construction process. Depending on the experience level, this role may provide technical oversight and mentor less experienced electrical designers and drafters. Accommodation Requests We are committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment. If reasonable accommodation is needed to participate in the job application or interview process, contact our HR Director (April Hawkins) at ************ or ********************** Essential Duties and Responsibilities Produces engineering design elements consistent with project specifications. Produces design elements and troubleshoots flaws in accordance with the project hours, scope, and parameters. Produces engineering construction documents based on project specifics. Manages project timelines and related design activity communication between the design team and the client accurately and timely. Provides assistance in the preparation of proposals and engineering agreements. Provides project coordination with in-house and outside sources. Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes and standards consistent with company quality standards. Accurately and consistently execute QA/QC process. Produces accurate and complete engineering project specifications within project parameters. Provide timely billing of projects to the accounting department. Actively participates in post design activities and represents the company in client meetings, through construction completion. Actively mentor junior engineers and designers. Follows established company policies and procedures. Actively engages with other members of the company to continuously strive to improve processes, create efficiencies, and reduce costs. Education, Experience, and Technical Skills Required Education, Experience, and Technical Skills Bachelor's in electrical engineering, electrical engineering technology, or architectural engineering Must have Real ID or Passport in order to undergo commercial airfare travel Must have valid driver's license Proficiency in Microsoft Office suite, including Word, Excel, Outlook, and Teams Proficiency in utilizing Revit to apply BIM knowledge to various architectural and engineering projects Proficiency in Microsoft Office suite, including Word, Excel, Outlook, and Teams Minimum 2 years in electrical design engineering Sound knowledge of electrical engineering fundamentals Excellent communicator, organizer, and engage Thrive in a fast-paced environment with changing demands and priorities Initiate and enjoy independent problem solving and working in the gray areas Successfully incorporate feedback and manage multiple points of view Demonstrate excellent language and written communication skills Preferred Education, Experience, and Technical Skills Previous experience in an architecture, engineering, construction, or related professional service firm Design to take pass FE and PE Licensing exams Work Environment This position primarily operates in a professional office setting with standard office equipment and a quiet, climate-controlled environment. While in the office, there is no regular exposure to loud noise, hazardous materials, or heavy machinery. This role also requires periodic travel to project sites, including locations undergoing renovation or active construction. During site visits, the employee may be exposed to non-temperature-controlled environments, construction noise, dust, and other typical conditions found on job sites. Appropriate personal protective equipment (PPE) may be required during these visits, depending on site conditions. While on site visits, an individual in this role will be required to work atypical hours at the request of the client or role demands. Physical Demands Sitting/Standing: This is not a sedentary role. This role requires the ability to be on your feet moving around a construction site for most of the day interacting with contractors, contractor representatives, and inspecting the construction work that is being performed. Walking: This role requires the ability to move about outside in various geographic and building terrains to access a construction site to provide quality assurance services. Stooping/Kneeling/Crouching/Crawling: This role requires stooping, kneeling, crouching, crawling, and ladder climbing to inspect all aspects of building construction to foundations, crawlspaces, and roofs. Using Hands/Fingers: This role constantly operates technological office equipment such as laptop, mouse, keyboard, computer monitors, telephones, and scanners, copiers, and fax machines. Talking/Hearing: This role requires constant communication with others in the organization to exchange information, review information, and make decisions about information. Seeing: This role requires the ability to see, view, and distinguish all aspects of construction to ensure quality control. Carrying/Lifting: This role requires lifting up to 30 lbs to transport technological office equipment, safety equipment, and other needed construction items to and from various workspaces. Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Native American Hiring Preference Our parent company, Mno-Bmadsen, prefers to hire Pokagon citizens who are qualified and suitable for available positions. For purposes of this section, “qualified” means that the applicant meets the technical and experiential needs for employment; and “suitable” means that the candidate appears to be the best fit considering present circumstances and conditions. Targeted preference is in the following order: First, to qualified Pokagon Band citizens; and Second, to qualified spouses and qualified custodial parents; and Third, to other qualified Native Americans; and Fourth, to all other qualified applicants Any determinations as to the applicability of the Pokagon hiring preference are at the discretion of each Company President. Branch: Buildings Entity: Steelhead Engineering Company FLSA Status: Exempt Hours Per Week: 40 Work Arrangement: Hybrid or Remote (Dependent Upon Location) Reports To: Technical Manager Manages Others: No Overnight Travel: Up to 5% Tags: #LI-Hybrid

Job Description ArcFlo is seeking a detail-oriented Electrical Designer/Drafter to join our engineering team. The Electrical Drafter will be responsible for creating manufacturing drawings using Zuken (Electrical CAD software). This role works closely with electrical engineers and manufacturing. RESPONSIBILITIES Creating manufacturing drawings using Zuken software that meet customer specifications Providing support to production team on product drawings Verifying drawings against customer specifications and bill of materials Revise and update drawings as necessary Support continuous improvement initiatives QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) Associates or technical 2-year degree preferred but not required Prior experience with CAD software, electrical preferred Skills, Talents and/or Characteristics Basic computer skills, knowledge of Windows and/or Microsoft Office Strong understanding of electrical systems and terminology Ability to work in a team environment and own processes with minimal oversight Demonstrated ability to understand bill of materials and mechanical drawings Conditions/Special Requirements This position is located at 3030 Kersten Court, Kalamazoo MI. This position is mainly stationary in a manufacturing office setting. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must wear safety glasses with side shields and safety toed shoes while performing some duties of this job.

At Innotec, we're passionate about designing innovative and durable products that enhance safety. As industry experts in industrial LED lighting, headrest stays & metal forming, and counterweights, we take pride in our ability to provide cutting-edge solutions that meet the unique needs of our customers. As a leading LED lighting manufacturer, we're also dedicated to promoting sustainability in everything we do. By minimizing our environmental impact, we're not only contributing to a healthier planet, but we're also providing our customers with more sustainable and cost-effective solutions. Innovation is our passion. People are our culture. We are selectively seeking an Electrical Engineer with a Launch focus to join our team. Successful candidates will have a desire to work in a fast-paced environment based on trust and integrity and have an interest in a hands-on approach to business. Interested applicants should have a passion for manufacturing and innovation as well as a desire for a broad scope of daily responsibilities. In addition to these qualities, we are looking for someone with the following characteristics and qualifications: Requirements We're looking for quick-learning, technically oriented engineers with the following qualities: 3+ years of engineering experience launching product Knowledge of lighting and LED design is a plus Proven self-directed Project Management skills while consistently hitting deadlines To lead new product development through concept, design, tooling, and production readiness. Proven results towards continuous improvements Experience with product or process innovations and a perpetual drive toward learning Familiarity with many different aspects of the manufacturing process, i.e. product/machine design and build, launch, quoting, price negotiation, customer interaction Proven leadership ability and desire to work in a team based atmosphere Additionally, we're looking for the following qualifications: A Bachelor's degree in electrical engineering 3+ years of experience in related field Must be a U.S. citizen or green card holder Manufacturing experience is a plus! Industry specific experience is a plus, but not a requirement Innotec offers competitive compensation and benefits including profit sharing, ESOP, 401k investment, generous paid leave, tuition reimbursement, robust training and development, and lots of cool technology. Innotec is an equal opportunity employer Innotec extends equal employment opportunities to qualified applicants and employees regardless of an individual's race, color, religion, national origin, age, sex (including pregnancy, gender identity, and sexual orientation), disability, marital status, military service, height, weight, genetic information, or any other reason protected by law. Assistance Innotec is committed to working with and providing reasonable accommodation to applicants with disabilities. For accommodation requests, email us at ************************ . Innotec will not discriminate against any qualified individual who can perform the essential functions of the job with or without a reasonable accommodation. Understanding your right to work At Innotec, we use E-verify to confirm you're authorized to work in the U.S. E-Verify - English & Spanish Right to Work - English Right to Work - Spanish Only selected applicants will be contacted.

Tiara Yachts Electrical Engineer 725 East 40 th Street, Holland, MI. 49423 Full-Time | In-Office | Holland, MI Tiara Yachts, one of America's oldest privately held boat manufacturers, has been a leader in the luxury motor yacht market for over 50 years. Located in Holland, Michigan, we are a family-owned company built on a foundation of quality, craftsmanship, and a deep passion for the marine lifestyle. We take pride in designing and hand-building American-made products that deliver exceptional performance and style to our customers. Position Summary The Electrical Engineer will be responsible for designing and developing the complex electrical systems that power our luxury yachts, from navigation and communication to onboard automation and control systems. This role involves collaboration with engineering and manufacturing teams to ensure all electrical components meet Tiara's stringent safety and quality standards. Key Responsibilities Design & Development: Prepare and/or review technical documentation, engineering procedures, specifications, and drawings for shipboard electrical power generation, distribution, and control systems. System Integration: Design and integrate electrical harnesses, console wiring, and complete unit electrical systems, using diagrams and schematics to ensure accurate installations. Analysis & Compliance: Perform calculations and analysis in accordance with regulatory bodies (e.g., USCG, ABYC, specific classification societies) and company standards. Troubleshooting & Support: Provide expert electrical support to the production and manufacturing teams, troubleshooting issues that arise during the build process. Vendor Collaboration: Evaluate systems, equipment, and vendors, and manage related subcontract activities. Quality Assurance: Conduct quality checks to ensure all components and installations meet safety standards and performance requirements. Qualifications Qualifications & Skills A technical degree in Electrical Engineering or a related field is preferred. Comprehensive understanding of marine power, control, automation, communication, and navigation systems is essential. Proficiency with design software, such as AutoCAD and SolidWorks. Familiarity with or certification in USCG, NMMA and ABYC marine manufacturing standards. Strong attention to detail, analytical approach to problem-solving, and ability to work independently or as part of a team. Ability to read and understand complex diagrams, schematics, and assembly instructions. Benefits Tiara Yachts offers a comprehensive benefits package designed to support our employees and their families: Comprehensive medical, dental, and vision insurance with low premiums. Health Savings Account (HSA) with a generous company contribution. Competitive 401(k) match. Competitive paid time off, including vacation, personal days, and holidays. Uncapped profit-sharing bonus. Tuition reimbursement for continued education. On-site training and development opportunities. Work-life balance with no mandatory weekend hours

Tommy's is looking for a Lead Electrical Design Engineer to develop new technologies, drive product enhancement, design hardware, documentation, and other systems critical to our high-capacity wash processes. What can Tommy's offer you? Base pay and eligibility for annual profit-sharing bonus Full insurance package including Health, Dental, Vision, Life, Disability, Employee Assistance 401k match and complimentary financial planning services with Rockefeller Paid time off and paid holidays Opportunity for continued education and tuition assistance Valuable learning and development program Significant ability to grow internally for motivated and strong performing team members. Fun, energetic, family-oriented work culture with an emphasis on team member morale Growing International brand / presence Position Responsibilities: Lead product category by providing ideas for innovation, directing projects, and overseeing category engineers including staffing needs and periodical evaluations Electrical circuit design for car wash control system including pumps, blowers, solenoids, push buttons, e-stops, photo eyes, pressure sensors, etc. Establish, document, and maintain controls system standards including drawing templates, AutoCAD Blocks, startup procedures and troubleshooting guides Produce drawings of control panels and field wiring diagrams Create documentation checklists, issue communication and quality related support bulletins Support control panel building operations as the conduit for engineering knowledge and requirements. Other duties as assigned; duties and responsibilities may change at any time with or without notice. Process-oriented and strong collaborator with ability to communicate and manage well at all levels of the organization and across various departments Highly adaptable with strong problem-solving and critical thinking skills; ability to exercise sound judgment and make decisions based on accurate and timely analyses High level of integrity and dependability with a strong sense of urgency and results-orientation Views customer care as high priority; exhibits a positive can-do attitude Displays a strong initiative and drive to identify gaps and fill them Position Qualifications & Candidate Attributes: Associates/Bachelors in Engineering degree with emphasis in electrical and/or industrial control software engineering or equivalent experience Experience with CAD schematic design with AutoCAD Electrical, SolidWorks, MS Visio, or similar packages 1+ years of professional work experience Car wash industry experience preferred Fluent in AutoCAD Electrical Industrial Control Panel Design UL Experience Work Environment and Physical Demands This job operates in a warehouse environment. Operating hours are Monday through Friday from 8:00am - 5:00pm. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets along with forklifts, pallet jacks, and other warehouse / assembly tools and functions. This role operates primarily indoors with limited to no travel expectation. To successfully perform the essential functions of this job, team member must be able to: Ability to work and commute in all weather conditions Able to move about inside the office to access standard office equipment, etc. Able to effectively communicate, listen, detect, converse with, discern, convey, express oneself and exchange information Able to walk, bend, twist, turn, stoop, climb steps, reach with hands, use hands to fingers Drive between company locations as needed while on job Frequently stand and work in a fast-paced environment where they will often be multitasking Tolerate vibrating tools and louder than normal work environment at times Frequently stand and walk for the majority of each shift Ability to lift and maneuver up to 50 pounds Company Overview: Tommy's Express is a national franchise for outstanding car washes and car care services. Powered by industry leading technology and decades of experience and planning, Tommy's Express car washes deliver a cutting-edge car wash experience unlike anything you've encountered before. Our fully automatic washes feature advances including the easy-loading car wash dual belt conveyor, wide open car wash bay for natural lighting, advanced presoak and sealer services, and free high-power self-serve vacuums on site. Tommy Car Wash Systems (“TCWS”) is the power behind our Tommy's Express equipment. TCWS is a team of passionate car wash professionals working to create opportunities for our partners to become the best car wash operators they can be. We provide modular building designs, robust stainless-steel car wash equipment, an advanced Wash Club license plate reader system, the Tommy Transporter belt, high performance wash detergents, and an industry-leading franchise opportunity. At Tommy Car Wash Systems, we have a solution for almost any size operator. Our team has assisted in the development of hundreds of some of the most successful car washes around the world. Together, Tommy's Express and Tommy Car Wash Systems make up the Tommy's Corporate brand, headquartered in Holland, MI.

Electronics Engineer (6-Month Contract) Employment Type: Contract (6 months) Experience Level: Mid to Senior LevelWork Arrangement: Hybrid (on-site 3-4 days per week; some weeks may require full-time on-site presence) We are seeking an experienced Electronics Engineer for a 6-month contract position to support a critical electronics manufacturing project. The ideal candidate will have strong expertise in printed circuit board assembly (PCBA), design for manufacturing (DEMF), and testing, with the ability to work collaboratively with suppliers and cross-functional teams to ensure successful product integration. What it's like to work here:Make a positive difference! It's why we exist. We are always looking for teammates who are eager to use their diverse set of talents with our customers, coworkers, and communities. We want to leave this world better than we found it.What you will get to do: Electronics Manufacturing Management: Oversee the manufacturing of 4 printed circuit boards (PCBs), wiring harnesses, connectors, and integration with internal battery power systems Supplier Collaboration: Travel to supplier location in Jasper, Indiana (1038 E. 15th St., Jasper, IN 47546) approximately 3-5 times during the 6-month project duration to provide technical support and oversight Process Development & Validation: Document all process development activities and validations required for full integration of designed components Verification & Validation (V&V): Bridge design components into V&V activities, including process development, process validation, and production documentation Technical Documentation: Create comprehensive documentation to support manufacturing processes, quality standards, and regulatory requirements What will make you successful: Proven experience with PCBA (Printed Circuit Board Assembly) processes Strong background in DEMF (Design for Manufacturing) principles Hands-on testing and validation experience Proficiency with the following software tools: 1PLM (Product Lifecycle Management) SLMS (System Lifecycle Management Software) Valgenesis (validation software) E-CAD (Electronic Computer-Aided Design) Microsoft Office Suite DISHER is a nationally recognized engineering, manufacturing technology, and technical recruiting firm based in Zeeland, Michigan. Our diverse team of top talent comes alongside clients within multiple industries to solve their unique challenges. DISHER truly is a great place to work. Our mission? To Make a Positive Difference with our customers, coworkers, and communities. Every day we strive to leave this world better than we found it. It is what motivates our caring team and unifies our culture.

Job DescriptionJOB TITLE: PRODUCTION ASSOCIATE DEPARTMENT: Production REPORTS TO: Production ManagerProduction LeadProduction Assistant Lead STARTING PAY RATE: $15 / HOUR 1. PURPOSE AND SCOPE:The Production Associate is responsible for producing quality parts and meeting the on-time completion expectations of their Production Lead and Assistant Lead. 2. RESPONSIBILITIES:· Build quality products as assigned while sitting for an extended period of time.· Ensure on-time completion of products assigned· Accountable for the verification of a job set-up by their lead person· Must make sure that all paperwork given to them for a job by their lead is correct· Make certain that DBA Labor Timesheet is filled out correctly and turned in each day· Provide on-the-job assistance to new associates as directed by a lead or assistant lead.· Attend production related classes, which includes IPC 620 classes· Promote team building· Clean work area at the end of the day 3. EDUCATION and TRAINING:The Production Associate is required, as a minimum, to have a high school diploma or GED equivalent. The Production Manager and the Human Resource Manager can determine whether education and training are “equivalent” based on their experience.Must be able to pass a pre-employment physical, Titmus test and IPC certification.Individual 4. TECHNICAL RESPONSIBILITY:Use and knowledge of a ruler is essential. 5. PHYSICAL REQUIREMENTS:· Must be able to sit for extended periods of time (up to 8 hours per shift).· Frequent use of hands and fingers for small part assembly, including grasping, twisting, and manipulating wires and tools.· Good hand-eye coordination and fine motor skills required.· Ability to distinguish colors and read small print (used in wire identification and labeling).· Occasional lifting of light materials (up to 15 pounds).· Visual acuity to perform close-up work with small components. 6. WORKING CONDITIONS:· Work is performed in a seated position at a workstation.· May involve repetitive motions and prolonged focus on detailed tasks.· Use of small tools such as wire strippers, crimpers, or soldering equipment may be required. ADA Notice: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

I I Stanley Company, Inc., a leading supplier of automotive lighting products, was established in Battle Creek, Michigan in 1985. Founded on the principles of respect, trust, and value, we serve a wide range of customers - domestic and foreign - by supplying them with high-quality automotive headlamps, tail lamps, fog lamps. BASIC RESPONSIBILITIES: Execute the design and development of electronic products (HW & SW) from initial concept to production by utilizing CAD and CAE resources Ensure compliance to customer and regulation requirements through robust product design Conduct and oversee design validation testing for prototypes and production hardware Identify, investigate, and resolve design concerns/issues as early as possible in the development process Investigate and integrate new technologies into product design Provide electronics related guidance and technical advice to design, engineering, and sales for new product development and production programs Create electronic diagrams and circuits using CAD software for product design output Execute delivery of technical information to the customer, other company departments, and within the design department Identify and negotiate solutions to technical issues Ensure compliance to quality management system requirements Support planning and execution of automotive lighting projects REQUIRED QUALIFICATIONS: Knowledge in electronics circuit design (hardware design and layout) for automotive lighting Knowledge of testing methods and government requirements for automotive designs Data analysis and problem-solving skills Organizational and planning skills Computer skills using standard business software (including MS office programs) Computer skills using Math CAD, OrCAD, or PSpice Good written and verbal communication, along with good presentation skills Able to speak confidently to individuals at all levels of authority Willing to travel to customer on-site locations, out of town, and overseas OPTIONAL/PREFERRED SKILLS: Knowledge in DFMEA creation EDUCATION REQUIRED: B.S. in Electrical Engineering with four to six (4-6) years of experience in a position involving automotive electronics development Master's Degree in Electrical Engineering or related discipline with two to four (2-4) years of experience preferred PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In most cases the position will be required to stand for extended periods, use hands and fingers to handle or feel. The position may occasionally need to lift/pull up to 50 pounds and have specific vision abilities related to close and color vision. While performing the job the position is highly exposed to moving vehicles/machinery and factory equipment. The position may be required to work overtime to meet deadlines and requirements. In addition to a fully air-conditioned work environment, I I Stanley provides a total compensation package to meet the needs of our associates and to be competitive in today's work environment. We are pleased to offer the following benefits to our full-time Associates effective on the first day of employment: Competitive Wages Annual Performance Reviews & Merit Increases Free Medical Insurance Options for you and your family Free Life Insurance Dental & Vision Insurance 401K & Employer Matching Healthcare Opt Out Options Free Short-Term & Long-Term Disability PTO - Paid Time Off Free Uniforms & Safety Shoes

Demonstrate SoundOff Signal's Core Values in daily interactions with internal and external customers. Build and test PCB prototypes of Surface Mount and Though Hole Technology: PCB assembly validation testing to product specs. Troubleshoot and test prototypes. Work with Project Engineer to resolve issues Able to use PCB design software CadSoft's Eagle Altium Designer Assist with creation/maintenance of initial product Bills of Materials. Assist with product validation testing where needed. Able to read and follow SoundOff Signal Work Instructions. Able to perform job consistently and without excessive absenteeism or tardiness. Other duties as assigned. Must be enrolled in a Bachelor's of Electrical Engineering college program. Previous experience with Electronic assemblies and troubleshooting a plus. Able to read and understand an electrical schematic. Proficient in troubleshooting and repairing electronic assemblies, including SMT circuitry. Proficient using Multi-meters and Oscilloscopes Soldering skills. Proficiency of the basic Microsoft software packages including Word and Excel. Excellent written and oral communication skills. Ability to work with people. Able to multi-task in a fast-paced environment. Automotive Electronic wiring background beneficial. General mechanical aptitude in a shop environment (hand tools, light duty power tools, calipers, etc.) beneficial. Able to lift up to 35 lbs. Able to stand, sit, walk, bend, twist, rotate, and/or reach throughout an entire shift. Must be able to handle and work with small parts. Mostly office and electronics lab environment, occasional light manufacturing environment Fast-paced, team-oriented environment Low noise level in a temperature-controlled setting Some level of domestic and/or international travel may be required Mostly normal business hours with occasional need to flex hours Salary Description $20 / hour

ArcFlo is seeking a detail-oriented Electrical Designer/Drafter to join our engineering team. The Electrical Drafter will be responsible for creating manufacturing drawings using Zuken (Electrical CAD software). This role works closely with electrical engineers and manufacturing. RESPONSIBILITIES Creating manufacturing drawings using Zuken software that meet customer specifications Providing support to production team on product drawings Verifying drawings against customer specifications and bill of materials Revise and update drawings as necessary Support continuous improvement initiatives QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High school diploma or general education degree (GED) Associates or technical 2-year degree preferred but not required Prior experience with CAD software, electrical preferred Skills, Talents and/or Characteristics Basic computer skills, knowledge of Windows and/or Microsoft Office Strong understanding of electrical systems and terminology Ability to work in a team environment and own processes with minimal oversight Demonstrated ability to understand bill of materials and mechanical drawings Conditions/Special Requirements This position is located at 3030 Kersten Court, Kalamazoo MI. This position is mainly stationary in a manufacturing office setting. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must wear safety glasses with side shields and safety toed shoes while performing some duties of this job.

TGW Systems, Inc. creates and implements material handling solutions for manufacturing and distribution facilities for ecommerce and retail business channels. We have an opening for an ambitious Electrical Engineering Co-Op to join our Realization Controls team in Grand Rapids, Michigan. The Electrical Engineering Co-Op will utilize engineering processes and tools in the designing, planning, and inventorying for a customer's order according to schedule, budget, and scope. You'll Love This Job If You Are: Looking to gain understanding of electrical circuits Wanting the ability to read e-drawings Receive an understanding of mechanical designs with the ability to read AutoCAD drawings Looking to expand your knowledge of electrical circuits and e-drawings REQUIREMENTS Education: This position requires a junior or senior-level student in Electric or Computer Engineering. Rotation: This is a fulltime, fall 2025 rotation (September 2025 - December 2025). Travel: Willing to travel 30% of the time to customer sites. Compensation: $19/hour. The successful intern will be considered for full-time employment upon graduation. You'll Get To Do: Learn TGW and industry technologies and products Complete internal training of related engineering processes and tools Verify accuracy of controls design documentation, including sensor/actuator reports, controls component order lists, electrical drawings, motor lists, etc. Controls Systems engineering - create and maintain sensor/actuator reports and controls component order lists, etc. - on project under direction of a lead engineer Inventory logistics after completion of projects Support the specification and clarification of controls interfaces to equipment supplied by third-parties Support on-site controls installation and logistics Physical Requirements Ability to remain stationary at a desk for prolonged periods of time. Ability to go to site frequently and move safely around industrial and/or warehouse environment. Ability to lift and carry supplies up to 25 pounds at a time. Ability to operate computers, tablets, phones, and other electronic devices. Ability to communicate with others verbally and in writing, on a frequent basis. Ability to tolerate exposure to job site temperature fluctuations due to seasonal weather in geographic region. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other Requirements This position may require work at TGW customer sites. TGW's customers may require background checks before accessing their sites. Refusal to participate in a customer-required background check may result in a customer barring access and a subsequent reduction in work. Equal Opportunity Employer TGW Systems Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.