Electronics technician jobs in Aloha, OR

Washington County's Facilities Division takes great pride in the planning, construction, maintenance, and repair of nearly 45 County-owned buildings (over 1.8 million square feet), grounds, parks, and associated hard-scape. We are looking for a Facilities Electronics Technician to join our skilled team in providing physical and electronic security support in collaboration with the Safety & Security Manager and team. The Facilities Electronics Technician performs advanced-level development, installation, maintenance, and repair of various electronic equipment and systems including closed-circuit television (CCTV), intrusion detection, fire alarm and evacuation, electronic signage, duress (panic) alarm, access control, building management, and other electronic systems. The Facilities Electronics Technician is an advanced journey level classification. The incumbent performs routine and complex development, installation, repair, and maintenance of building electronic systems and equipment. The incumbent receives general direction regarding the scope and approach to projects or assignments and is expected to operate with a high degree of independence and professional judgment to solve highly complex problems in the performance of their assigned duties. Work is generally performed during standard business hours, but the employee may be required to be on-call, work weekends and evenings, and may be called back to work during emergencies. This job primarily consists of all things low voltage, including but not limited to: * installation and monitoring of access control * access card issuance through AMAG Symmetry program software * DMP security systems * Ciscor panic button system * Bosch camera systems * all monitoring systems through a third party monitoring company * building signage * Internet protocol * network communication * cellular communicators * Programmable Logic Controls. For a complete list of essential duties, please use this link: Facilities Electronics Technician Ideal Candidate Profile The ideal candidate for this position will be committed to contributing to a safe space for everyone within and interacting with the Facilities, Fleet & Parks Department, we are looking for an energetic Facilities Electronics Technician professional with a passion for public service, an eye for detail, a strong work ethic with the ability to multi-task and adapt to reactive and emergency situations, demonstrate good communication skills, and have consistent attendance. Successful candidates will enjoy performing routine tasks and be able to shift priorities to respond to urgent work requests with pride, professionalism, and a positive demeanor. Minimum Qualifications * Four (4) years of experience in repairing, installing, and servicing electronic building equipment and systems similar to those in the required duties; OR * An Associate Degree in electronics technology or a related field and two (2) years of experience in repairing, installing, and servicing electronic building equipment and systems similar to those in the required duties. Additional Requirements * Must possess a driver's license valid in the State of Oregon and have an acceptable driving record per Washington County policy. To review Washington County's Driver's License and Record Policy: Driver's License & Records Policy (Vehicles - Section 800). * Possession of a valid Limited Energy Class A Technician license issued by the State of Oregon or an equivalent license comparable to the Limited Energy Class A (LEA) Technician license. This may include, but is not limited to, Oregon Limited Energy Class B (LEB), Limited Journeyman Manufacturing Plant Electrician (PJ), or General Journeyman Electrician (J) licenses. * Requires successful completion of a criminal background and personal history check. Next Steps: * Apply today! In lieu of a resume, you are required to complete and submit an online application, which will be used to screen for minimum qualifications (MQs) and to determine starting pay in accordance with the provision of the Oregon Equal Pay Act. * MQ Review: HR will screen applications for MQs after the posting closes. * Panel Interview(s): Our goal is to schedule panel interviews with candidates who successfully pass the initial review as soon as possible. * Conditional Offer of Appointment: Human Resources will conduct a salary analysis for the successful candidate(s) and extend an offer of appointment. * Post-Offer Check: The successful candidate(s) will undergo background, and driving record checks. * Start Date: A start date will be determined after all conditions of employment have been met. Please note: This recruitment may be used to fill future full-time and part-time vacancies in the same classification, or job family, that may become available within the next six-month period. Our Commitment to You Washington County is an equal opportunity employer committed to using a merit-based system in which recruiting, selecting, and advancing employees is based on knowledge, skills, and abilities. Our organization embraces innovation, collaboration, and work-life harmony. We promote employee development and offer an award-winning benefits and wellness program as well as an opportunity to serve and support our vibrant community. * Veterans' Preference: If you are a veteran and would like to request veterans' preference points for this recruitment, please review instructions using this link: Veterans' Preference Points * Accommodation under the Americans with Disabilities Act: A reasonable accommodation is available to anyone whose specific disability prevents them from completing this application or participating in the selection process for this recruitment. To obtain confidential assistance, please contact Human Resources at ************ or ****************************** at least 48 hours before the step(s) of the selection process for which you feel you need an accommodation. Additional Resources * Questions about this recruitment? Contact Mia at mia_******************************* * New to GovernmentJobs.com? Visit **************************************************** for a comprehensive, step-by-step guide on the application process. Need technical support? Call Government Jobs' Live Application Support at ************.

Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans. Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures. May conduct operational test and fault isolation on systems and equipment, help in determining methods to remedy malfunctions. Support the design, construction, test, and check-out of test equipment. Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus. Collaborates with development engineers. conducting engineering tests to collect design data or support research efforts. 1-2 years of related work experience. Firsthand experience with installation, maintenance, repair, testing, or troubleshooting of equipment or electronics. Effective communication skills, written and verbal, in English. Proficient in utilizing computer-based data systems, applications, and Microsoft Office software. Ability to work a shift schedule. Associates degree, Technical Certificate, Diploma or higher in a technical field. Experience in electrical engineering, mechanical engineering, bioengineering, metrology, lab operations, or related areas. Experience in semiconductor experience is a plus.

The Avionics Radio Technician performs line and bench maintenance on a variety of aircraft avionics communication/navigation systems and components. May perform flight line maintenance to include inspect, troubleshoot, test, repair and installation. Performs bench level maintenance down to component level to include inspect, troubleshoot, test, align, repair and overhaul. WHAT YOU WILL DO: Read and interpret maintenance manuals, wiring diagrams, schematics or other technical data to determine the feasibility and method to perform the assigned task. Install, repair, align, maintain, service and/or tune the following: radio, radar, microwave electronic communication systems receivers and transmitters, including analog and digital HF, UHF and VHF equipment; intercom audio panels and audio amplifiers and public address systems. This will require the use of electronic test equipment and other electronic devices. Locate and isolate defects in electronic equipment; repair, replace, and troubleshoot defective parts; install electronic units and associated electrical elements. Utilizing special tools, circuit testers, meters and equipment; performs tests and/or checks as required to confirm component and system serviceability. Document all inspection findings and work performed/corrective action in the appropriate maintenance records. Maintains work areas and tools in a clean and organized manner, practices proper tool and FOD control. WHAT WE NEED FROM YOU: High school diploma or equivalent; further education or advance instruction relative to technical field is preferred. Requires 3+ years' experience performing line and bench maintenance on a variety of aircraft avionics communication/navigation radio repair systems and components. Airframe & Powerplant (A&P) license preferred (Airframe license is equivalent to 1 year experience; Powerplant license is equivalent to 1 year experience; A&P license is equivalent to 2 years' experience). Requires knowledge of standard wiring practices using contact crimp tools, inserting/extracting tools, wire stripping methods, connective types and contacts; experience with wire routing requirements. Ability to use precision measuring equipment and hand tools appropriate to the assigned tasks; general mechanics hand tools and appropriate tool box are required. CH-47 or CH-46 specific experience preferred; Military or commercial aviation avionics training preferred. Ability to handle multiple tasks simultaneously in a fast-paced, deadline-driven environment. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Temp Madden Industrial Craftsmen is looking for an Electronics Technician for a client that focuses on renewable energy prototypes. This position is a contract- temporary position that will have a 3-6 months duration. This is an exciting opportunity to work on brand-new technology in the renewable energy space! PAY: $35-$40/hr Electronics Technician Responsibilities: Production verification testing of PCB & assemblies. Using soldering irons, heat guns and reflow oven for PCB soldering, desoldering, rework, and hand build units. Mechanical build of the PCB assemblies. Assembling wiring harnesses, cutting wires, crimping ring terminals or ferrules, soldering connector pins to solder cups, applying heat-shrink, and tug-testing of a variety of cables and wire harnesses. Applying thermal paste to bolted assembly interfaces. Cleaning flux, dirt, and dust off of mechanical components and electrical PCBs. Inspection of the quality of the work by others & self. Other duties and responsibilities as assigned. Electronics Technician Qualifications: Have significant (at least 3 years) hands-on experience building, modifying, testing, and troubleshooting printed circuit board assemblies, with both through-hole and surface mount components. Have experience working in environments with high voltage electronics and fabricating cable assemblies. Have experience with thermal paste application. Have the ability to follow work instructions with precision. Candidate must have strong knowledge of tools and equipment used in electronics fabrication and testing (soldering iron, reflow oven, hot air rework station, optical microscope, common hand tools, digital multimeter, oscilloscopes, adjustable power supplies). Mechanical assembly experience. Strong attention to detail. Ability to be on your feet for up to 8 hours per day and occasionally lift objects weighing 50 pounds or more. Must be able to pass a pre-employment background check. Prior Engineering Technician experience is a plus. Benefits and Schedule: 3-6 month temporary position, possible long-term for the right employee $35-40/hour MON- FRI (9AM-5PM) Potential for OT 401 (k) with matching PTO Medical

Job Description Legacy Talent Search is currently seeking candidates for a Production Engineering Technician role in Forest Grove, OR. Our client is a well-established industry leader recognized for innovation, technical excellence, and a commitment to continuous improvement. They pride themselves on maintaining high standards across all stages of their engineering and manufacturing processes. This is an excellent opportunity for a hands-on technical professional who thrives in a problem-solving, design-focused environment. Key Responsibilities: · Analyze product and equipment specifications to determine designs compatible with existing manufacturing capabilities. · Evaluate feasibility for new equipment designs or modifications based on cost, space, timelines, and technical requirements. · Provide technical information related to manufacturing methods, materials, properties, and process limitations to support long-range planning. · Collaborate with research teams to resolve design challenges and refine engineering concepts. · Prepare or oversee the creation of detailed product layouts, drawings, schematics, and system designs. · Direct and coordinate the manufacturing or construction of prototype products or systems. · Compile and analyze operational, test, and research data to develop performance standards for new or modified products. · Plan, execute, and oversee experimental test programs. · Review test reports and data to determine whether designs meet required performance and functional specifications. · Work with cross-functional engineering personnel to develop design modifications as needed. · Evaluate engineering test outcomes for potential application to new product development or system enhancements. · Adhere to established standards, procedures, and applicable laws while continuously updating job knowledge. · Perform other related duties as assigned. Qualifications: · Associate's degree from a two-year college or technical school; or 6 months to 1 year of related experience and/or training; or an equivalent combination of education and experience. · Proven experience in design, fabrication, manufacturing, and customer/supplier relations. · Advanced computer proficiency, including CAD software and Microsoft Office. · CAD and 3D drawing experience are preferred but not required. · Ability to read, interpret, and analyze electrical/technical specifications, financial reports, and design documentation. · Strong communication skills with the ability to respond to inquiries from customers, regulatory agencies, and internal teams. · Confidence presenting technical information to management and administrative personnel. · Strong mathematical abilities, including geometry, trigonometry, and practical application of ratios and percentages. · Demonstrated ability to solve practical problems and work with variables in situations where limited standardization exists. · Ability to interpret written, oral, diagram, and schedule-based instructions. · Excellent organization skills with high attention to detail and accuracy. · Strong interpersonal communication skills, both written and verbal. · Ability to multi-task, work under pressure, and meet deadlines. Physical Demands: · Regularly required to sit, use hands for fine motor tasks, and communicate clearly. · Frequently required to reach with hands and arms. · Occasionally required to stand, walk, climb, balance, stoop, kneel, crouch, or crawl. · Must be able to lift and/or move up to 25+ lbs. · Vision requirements include close vision, distance vision, depth perception, and the ability to adjust focus. Work Environment: · May be exposed to moving mechanical parts. · Noise level is typically quiet. What We Offer: · Competitive compensation package. $25-$35 DOE. · Comprehensive benefits, including health insurance and paid time off. · Opportunities for career growth and skill development. · A supportive, innovative, and inclusive workplace culture. · The chance to contribute to a company that values excellence, continuous improvement, and community impact. At Legacy Talent Search, we are more than just a staffing agency-we are dedicated to supporting the growth of the American economy and way of life, one job at a time. Focused on rebranding the staffing industry, we work tirelessly to demonstrate how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

PART-TIME Field Technician Job Description We are looking for tech savvy individuals to join our field team! Our team of World Class Field Technicians are responsible, self-motivated and service-oriented people with great technical aptitude and customer service. We offer a flexible schedule, a highly competitive hourly wage along with mileage and drive time reimbursement. Retail or merchandising experience is preferred but not required. We believe in investing in our technicians and offer paid training to ensure your success in the field! Job Breakdown: Our Field Technicians perform installations, maintenance, break-fix, and general merchandising tasks within retail locations. Technicians are the front-line team for new product releases like smart devices, tablets, gaming consoles and other consumer electronics. Our technicians have flexible early morning/midday hours Monday-Friday with select work available on the weekends. Who is MTI? For over 40 years, MTI has developed merchandising technologies that enable retailers and OEMS's to securely display, power and showcase the full spectrum of consumer electronics, from tablets and smartphones, to cameras and laptops. Some of the worlds most recognized brands and six of the seven largest retailers in the United States utilize MTI products. Our retail-hardened technologies are engineered to last in the most demanding environments, delivering the industry's lowest total cost of ownership and the highest level of mechanical and electronic security. Responsibilities: · Install and/or build displays, fixtures or endcaps · Security set up/Cable running/ · Perform visits on scheduled date and time · Diagnose/repair electronic and mechanical issues · Ensure compliance as required by client agreement and/or scope of work · Excellent Communication with Manager/Scheduling team/Operations team · Keep workspace neat and clean during service Desired Skills: · Read and understand planograms · Working knowledge of hand tools · Basic computing/Smartphone skills · Training capabilities · Analytical and problem- solving skills Required Qualifications: · Organized self-starter · One (1) or more years of experience in customer service · Two (2) or more years of experience in one of the related fields: o Information Technology (IT) - Installation and Configuration o Point of Sale (POS) systems - Installation and Configuration o Digital Signage - Installation and Configuration o Audio / Video - Installation and Configuration o Consumer Electronics o 12-volt electrical systems - Installation and Configuration · Ability to work in a fast-paced and ever-evolving environment · Superior communication and customer service skills both written and verbal · Maintain a professional image at client sites · Must have reliable transportation · Able to understand, read and write English language Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. · Walking, bending, lifting, repetitive motion · Use of hand tools and test equipment · Occasionally lift up to 50 lbs. · Possible overnight installations · Breakdown and re-installment of retail displays MTI is an Equal Opportunity Employer Mobile Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Mobile Technologies, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Electronic Restoration Services (ERS) is a disaster restoration company specializing in the restoration of both consumer electronics and appliances. The Appliance and Consumer Electronics Technician will perform restoration on many varying electronics and appliances. Along with the restoration process, each tech will be certified to drive the box truck by taking the DOT physical so that they can do the pickup and delivery of electronics and appliances as well. Primary Responsibilities Include: (These are intended only as illustrations of the various types of work performed. The omission of specific duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position.) On-site evaluation of damaged electronics from insurance claims involving fire, water, or lightning strike damage. Inventory, remove and transport electronics and appliances from the insured's home/business. Disassemble and evaluate electronics to be cleaned, serviced, and/or repaired. Test, clean, restore, and re-assemble electronics to pre-loss condition. Deliver and reinstall appliances and consumer electronics within the insured home or business. Able to travel for up to two weeks for corporate training if needed. Comfortable being on-call for immediate deployment to job site nights or weekends. Requirements Include: Fantastic customer service skills. Able to interact one-on-one with the customer by within their own homes. Capable of de-escalating tense situations with customers. High School Diploma or equivalent. Associate's Degree or higher is a plus. Valid driver's license with a satisfactory driving record. Safely drive company vehicles to the job site. Able to work efficiently and effectively in a team environment. Exhibit a professional, neat, and clean appearance. Exceptional verbal and written communication skills. Working knowledge of basic PC and iPad operations. Strengths in multi-tasking and prioritizing. Attention to detail and accuracy. Ability to lift up to 75 pounds. Successfully complete a pre-employment drug screen and criminal background check. Pass the DOT physical. Additional Responsibilities of an ERS Appliance and Electronics Technician Consist of the Following: Report to work at scheduled times. Be available for non-scheduled work requirements as needed including nights, weekends, and holidays. Maintain appearance and demeanor representative of the ERS image. Cooperate with direct supervision and perform duties assigned by supervisors. Cooperate with other service technicians and perform duties assigned. Inspect own work and ensure that it is complete, thorough, and will pass ERS quality standards. Report all injuries immediately. Injured workers requiring more than first aid treatment must immediately be seen by a physician/clinic. Attend and participate in all staff meetings as requested. Abide by all rules, regulations, and policies contained in the Employee Handbook, Safety Manual, and Employment Agreement including active participation in identifying, reporting, and correcting situations affecting safety, quality, and customer satisfaction. Properly use and maintain the ERS vehicle in accordance with the manufacturer's recommendations and ERS procedures. Use and maintain all provided materials, supplies, and equipment in accordance with the manufacturer's recommended procedures. Report all deficiencies or unusual characteristics of the ERS vehicle or equipment on the appropriate ERS form. Document all job activity using the proper forms and by filling them out completely and legibly. Keep job or customer files neat, organized, and secure and keep its contents confidential. Sign Service Technician's schedule or Time Card (daily or weekly). Participate in ongoing training programs sponsored by the company and/or affiliated organizations and able to travel for the initial training program. Demonstrate competency in the knowledge and skills required for position by successfully passing exams needed to obtain trade-specific certifications. Fulfill all service technician essential functions. Fulfill all other duties and responsibilities assigned by the company. For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Prism Specialties Corporate.

Artech Information Systems is the #12 Largest IT Staffing Company in the U.S. and an employer of choice for over 7,000 consultants. We recruit world-class talent for IT, engineering, and other professional jobs at 70+ Fortune and Global 500 companies coast-to-coast across the U.S., India, and China. We are one of the fastest-growing companies in the US and we welcome you to search the thousands of jobs in our cutting-edge GEM system for employment opportunities that fit your qualifications. At the forefront of the staffing industry, Artech is a minority and women-owned business enterprise (MWBE) committed to maximizing global workforce solutions on behalf of its clients. Artech's deep heritage, proven expertise and insightful market intelligence has secured long-term partnerships with Fortune 500 and government clients seeking world-class professional resources. Job Description Primary PurposeUnder close supervision, performs basic functions requiring technical knowledge utilizing electronic applications, processes, standards and document control processes/procedures.Principal Duties and ResponsibilitiesEngineering Standards: Continues to learn and apply standards, systems, document control, departmental guides and B&V policies and procedures. Quality / Continuous Improvement: Ensures that deliverables are accurate and compliant by continually developing knowledge of the B&V Quality Program. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Engineering Production: Broadens knowledge of the applications required to modify and develop less complex deliverables based on a variety of design inputs. May assist with minor computations such as material quantity estimates and dimensional checks. Project Coordination: May assist in coordinating deliverables with other groups involved on the same project to minimize interference or errors. Client Focus: Focuses on the needs of internal clients while attempting to gain basic understanding of external client's main interests and drivers. Knowledge Sharing, Innovation and Technology: Proactively seeks and shares knowledge of latest technologies and processes.Minimum QualificationsAssociate Degree in Drafting or an Engineering Design Related Technology preferred. GCSC (Draft generic educational equivalent required. Minimum of 1 year related work experience.Preferred Job Qualifications1 year of experience required. Proficiency with Bentley Microstation required (**THE CANDIDATE WILL BE TESTED ON THIS**) Experience with AutoCAD and/or PLS-CADD are a plus but not a requirement. Diploma or Certificate preferred. Non-Technical: Learning on the Fly, Problem Solving, Perseverance, Patience, Time Management, Drive for Results, Self Development, Customer Focus, Listening,Informing. Technical: Intermediate knowledge of Computer Automation Additional Information For More Information, Please Contact Subh ************

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Radio Technician III, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers #HotJobs About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers #HotJobs As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport

Engage in mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly. Work in a prototype environment using schematics and drawings for new product builds. **Responsibilities** + Perform harness assembly, soldering, box assembly, button-up, and final testing within the electrical assembly department. + Work extensively with harnesses and soldering, following schematics and diagrams. + Engage in mechanical assembly tasks. + Conduct inspection, testing, quality assurance, and troubleshooting of electronics. **Essential Skills** + Experience in electronic assembly and blueprint reading. + Ability to read schematics, wiring diagrams, and mechanical prints. + Proficiency with hand and power tools; experience with shop tools such as lathes, mills, and drill presses is desired. + Prior experience with mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly. + Basic computer and typing skills. + Basic math skills. + Experience reading blueprints, schematics, or detailed work instructions. **Additional Skills & Qualifications** + Prior testing and troubleshooting experience. + Fabrication experience with mills, lathes, and drill presses. **Why Work Here?** Join a fun, fast-paced engineering consulting company experiencing explosive growth. Benefit from a dynamic work environment that fosters innovation and teamwork. **Work Environment** Work in a standard lab/production setting within a rapidly growing company. Engage with innovative technologies and methodologies in a collaborative atmosphere. **Job Type & Location** This is a Contract position based out of Camas, WA. **Pay and Benefits** The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Camas,WA. **Application Deadline** This position is anticipated to close on Dec 21, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Work with Production Manager and Lead Assembly Technician to schedule workflow and ensure delivery schedule commitments and quality standards are met Read, and understand shop drawings, blueprints, product specifications; process documents Process CNC cut files and program machine tooling, be able to edit programs and translate tooling instructions into commands for the computer Verify that the CNC machine calibration is within tolerance Monitor CNC machine operation and safely intervene in the event of machine malfunction; subsequently investigate and solve any machine malfunction Perform visual and dimensional inspection of parts, verify compliance with job specification and tolerances Perform daily CNC machine maintenance and performance checks Order replacement parts as required Perform tooling inventory and order additional tools to ensure no delays in manufacturing Perform tool maintenance, including tool sharpening Perform CNC machine repair and replacement of internal parts Able to interface with DDX software and perform tooling Train new employees or current employees on how to operate the CNC machine Proactively resolve potential issues Help maintain a safe, clean, and healthy work environment Report issues with tool, equipment or unsafe conditions Adhere to all OSHA and Swinerton safety practices and procedures Complete other responsibilities as assigned MINIMUM SKILLS AND EXPERIENCE Proven experience as a CNC operator Ability to program machine tooling and operate precise measuring equipment Ability to read and comprehend schematic engineering drawings and blueprints Computer savvy, comfortable operating 3D CAD software Mechanical aptitude, good math skills, and strong problem-solving ability Good communication skills Able to competently perform visual inspection of finished parts Familiarity with power tools, forklift and overhead crane Able to meet physical demands of the job: standing for extended periods, lifting loads up to 50 pounds, squat, bend or kneel while wearing a tool belt Comfortable working in a variety of weather conditions Strong sense of urgency Forklift certificate Overhead crane training and certification Rigging training and certification Always uphold Swinerton Core Values of Integrity, Leadership, Passion, and Excellence.

The Hardware Engineering Technician IV will be part of an engineering team developing power management hardware in Nickel-Zinc (NiZn) battery backup systems for multiple industries. They will be responsible for performing electrical and mechanical tests on engineering prototypes and preproduction units under the guidance of Engineers and Project managers. The selected candidate will also be supporting the development of electrical architecture and design, integration and debugging of new electrical hardware and firmware, and validation of the design in a structured engineering environment. This role will work on-site at ZincFive HQ in Tualatin, Oregon and will report to the Technical Engineering Manager. Hardware Engineering Technician IV Job Duties: Assemble prototypes of battery packs, Battery Management Systems (BMSs) and Uninterruptable Power Supply (UPS) systems Create and assemble test fixtures Modify circuits as directed by the engineers Provide feedback during the prototype assembly process, calling out manufacturability issues early in the design process. Set up and operate test equipment to evaluate performance of prototype parts, assemblies, or systems under simulated operating conditions and record results Test and monitor the performance of electrical circuits as designed by engineers Help with electrical schematic capture and Bill of Materials (BOM) maintenance Setup and perform reliability tests on various key system components. Participate in failure root cause analysis and support the corrective actions implementation Perform hardware and software design verification and validation testing Job Requirements: Associate's degree in applied science, Electronics 4+ years of experience Aptitude in the use of hand tools for mechanical assembly, electrical soldering, and wiring Experience in prototype assembly, testing and documentation Experience reading electrical schematics and mechanical drawings Experience with Oscilloscopes, Digital Multi Meters (DMMs), Power Analyzers, Signal Generators etc. Familiarity with Altium or similar schematic capture program Experience working in an engineering test Lab and product development environment Experience building fixtures for test setups Experience using data acquisition systems (DAQs) Experience working with thermal chambers Experience programming and debugging systems with microcontrollers Proficient in MS Office 365 tools Preferred Skills: Experience with Power Electronics Experience with Battery Management Systems (BMS) Experience with Printed Circuit Board layout Experience with Basic 3D modeling (SolidWorks CAD) Experience running additive manufacturing equipment (FDM 3D Printer) Key Competencies: Attention to detail Integrity Data collection and analysis Problem-Solving Results Orientation Sound engineering/scientific judgment Teamwork The ability to assess and initiate things independently Excellent verbal and written communication skills Physical Requirements and working conditions: Work involves sitting, walking, standing, bending, stooping, and lifting to 40 pounds Requires close visual acuity and the ability to distinguish color Office, warehouse, and lab environments Requires the ability to wear PPE when necessary, on the face and body Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role. In addition, the successful candidate for this position will become eligible for a comprehensive set of outstanding benefits, including medical, dental, vision, life insurance, 401k, paid sick time, paid time off for vacation, paid holidays, paid community service days, professional/personal learning program, and applicable state/federal paid family leave. ZincFive is committed to employing a diverse workforce. As an Equal Opportunity and Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. We maintain a safe workplace and perform pre-employment testing. ZincFive is a participant in E-Verify and receives employment authorization of new hires through Social Security and the Department of Homeland Security databases.

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Work closely with a cross-functional engineering team to develop next-generation industrial fiber laser components and systems. The successful candidate will: Conduct initial proof-of-concept experiments Build and characterize prototypes Develop and document processes and tooling Assist in transferring products to manufacturing, including training of operators Maintain equipment, organize materials and supplies, and ensure safe operation of development labs Troubleshoot problems in the development lab and the factory Desired Qualifications: Associates Degree or higher in lasers, optics, electronics, or another engineering discipline, or equivalent experience in related technologies Experience with lasers, optics, and fibers Experience with tools and equipment for fiber processing and inspection Experience supporting engineers working with lasers, fiber optics, electro-optic or opto-mechanical devices, or electronics Meticulous attention to detail, highly organized, self-motivated Experience with electronics and test equipment, including oscilloscopes, digital multimeters, power meters, CCD cameras or beam profilers, spectrum analyzers, etc. Good written and verbal communication skills Demonstrated problem-solving skills Familiarity with mechanical drawings and basic tooling Experience with Excel and data-analysis software Training or experience in Six Sigma, Lean Manufacturing, Statistical Process Control, and Design of Experiments nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting level and pay depends on qualifications: Engineering Technician I: $23.41 - $29.30 per hour Engineering Technician II: $25.49 - $33.10 per hour Senior Engineering Technician III: $27.57 - $35.80 per hour Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected]. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications 2nd Shift/3rd SHIFT (3pm-11pm,11pm-7am) FIRST SHIFT 1st Shift; 7AM-3PM Electronic Technician needs 2+ years of experience as an Mechanical / Electronic Technician Electronic Technician requires: Work experience preferably in a prototype build process environment. Technicians should be able to work either sitting or standing, performing complex repetitive tasks over the course of an 8 hour shift. Fine motor skills and good hand dexterity are critical to performing the tasks associated with the positions. Electronic Technician duties: operate complex process equipment, must be able to work in Clean room environments. Technicians will be building prototype assemblies and working with engineers on newly developed process equipment to assist in process development, debug of equipment, and process debug. Work with engineers assisting with project work Provide database reports/queries routinely Additional Information $19hr 6 MONTHS

Artech Information Systems is the #12 Largest IT Staffing Company in the U.S. and an employer of choice for over 7,000 consultants. We recruit world-class talent for IT, engineering, and other professional jobs at 70+ Fortune and Global 500 companies coast-to-coast across the U.S., India, and China. We are one of the fastest-growing companies in the US and we welcome you to search the thousands of jobs in our cutting-edge GEM system for employment opportunities that fit your qualifications. At the forefront of the staffing industry, Artech is a minority and women-owned business enterprise (MWBE) committed to maximizing global workforce solutions on behalf of its clients. Artech's deep heritage, proven expertise and insightful market intelligence has secured long-term partnerships with Fortune 500 and government clients seeking world-class professional resources. Job Description Primary PurposeUnder close supervision, performs basic functions requiring technical knowledge utilizing electronic applications, processes, standards and document control processes/procedures.Principal Duties and ResponsibilitiesEngineering Standards: Continues to learn and apply standards, systems, document control, departmental guides and B&V policies and procedures. Quality / Continuous Improvement: Ensures that deliverables are accurate and compliant by continually developing knowledge of the B&V Quality Program. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Engineering Production: Broadens knowledge of the applications required to modify and develop less complex deliverables based on a variety of design inputs. May assist with minor computations such as material quantity estimates and dimensional checks. Project Coordination: May assist in coordinating deliverables with other groups involved on the same project to minimize interference or errors. Client Focus: Focuses on the needs of internal clients while attempting to gain basic understanding of external client's main interests and drivers. Knowledge Sharing, Innovation and Technology: Proactively seeks and shares knowledge of latest technologies and processes.Minimum QualificationsAssociate Degree in Drafting or an Engineering Design Related Technology preferred. GCSC (Draft generic educational equivalent required. Minimum of 1 year related work experience.Preferred Job Qualifications1 year of experience required. Proficiency with Bentley Microstation required (**THE CANDIDATE WILL BE TESTED ON THIS**) Experience with AutoCAD and/or PLS-CADD are a plus but not a requirement. Diploma or Certificate preferred. Non-Technical: Learning on the Fly, Problem Solving, Perseverance, Patience, Time Management, Drive for Results, Self Development, Customer Focus, Listening,Informing. Technical: Intermediate knowledge of Computer Automation Additional Information For More Information, Please Contact Subh ************

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Radio Technician II, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician II, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 3+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, religion, national origin, age, disability, genetic information, military status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 3+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, religion, national origin, age, disability, genetic information, military status or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers As a Radio Technician II, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport

Join a dynamic team as an Electromechanical Technician, where you will engage in mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly. You will work in a prototype environment, directly utilizing schematics and drawings to build new products. **Responsibilities** + Assemble harnesses and perform soldering tasks. + Conduct box assembly, button-up, and final testing within the electrical assembly department. + Work extensively with harnesses and soldering, following schematics and diagrams. + Perform mechanical assembly tasks. **Essential Skills** + Proficiency in electronic assembly and blueprint reading. + Ability to read schematics, wiring diagrams, and mechanical prints. + Experience using hand and power tools; familiarity with shop tools such as lathes, mills, and drill presses is desired. + Prior experience with mechanical assembly, point-to-point electrical wiring, soldering, and wire harness assembly. + Skills in inspection, testing, quality assurance, and troubleshooting electronics. **Additional Skills & Qualifications** + Experience with harnessing wires and assembly within a manufacturing environment. + Familiarity with power screwdrivers and hand tools. + Basic computer, typing, and math skills. + Experience reading blueprints, schematics, or detailed work instructions. + Preferred: Prior testing and troubleshooting experience and any fabrication experience with mills, lathes, or drill presses. **Why Work Here?** Experience the thrill of working in a fun, fast-paced engineering consulting company that is currently experiencing explosive growth. Join a team where innovation and creativity are at the forefront. **Work Environment** Employees will be working in a standard lab/production environment, equipped with the necessary tools and technology to support a productive workday. **Job Type & Location** This is a Contract position based out of Camas, WA. **Pay and Benefits** The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Camas,WA. **Application Deadline** This position is anticipated to close on Dec 16, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications 2nd Shift/3rd SHIFT (3pm-11pm,11pm-7am) FIRST SHIFT 1st Shift; 7AM-3PM Electronic Technician needs 2+ years of experience as an Mechanical / Electronic Technician Electronic Technician requires: Work experience preferably in a prototype build process environment. Technicians should be able to work either sitting or standing, performing complex repetitive tasks over the course of an 8 hour shift. Fine motor skills and good hand dexterity are critical to performing the tasks associated with the positions. Electronic Technician duties: operate complex process equipment, must be able to work in Clean room environments. Technicians will be building prototype assemblies and working with engineers on newly developed process equipment to assist in process development, debug of equipment, and process debug. Work with engineers assisting with project work Provide database reports/queries routinely Additional Information $19hr 6 MONTHS

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Responsibilities:Work closely with a cross-functional engineering team to develop next-generation industrial fiber laser components and systems. The successful candidate will: Build and characterize prototypes and product assemblies Work closely with engineers to Develop and document processes and tooling Assist in transferring products to manufacturing, including training of operators Maintain equipment, organize materials and supplies, and ensure safe operation of production areas Troubleshoot problems in the factory Qualifications: Associates Degree or higher in lasers, optics, electronics, or another engineering discipline, or equivalent experience in related technologies Experience with lasers, optics, and fibers Experience with tools and equipment for fiber processing and inspection Experience supporting engineers working with lasers, fiber optics, electro-optic or opto-mechanical devices, or electronics Meticulous attention to detail, highly organized, self-motivated Good written and verbal communication skills Demonstrated problem-solving skills Experience with Excel and data-analysis software nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting level and pay depends on qualifications: Engineering Technician I - $23.41 - $29.30 per hour Engineering Technician II - $25.49 - $33.10 per hour Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected]. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster