Electronics technician jobs in Fort Carson, CO - 74 jobs

United Communications Tier 1 Tech L2 CO Colorado Springs, CO Omni Technology Group is currently seeking a talented United Communications Tier 1 Tech with an active TS/SCI clearance to provide maintenance and advanced support for customers globally. The successful candidate will be responsible for providing multiple services in the realm of Unified Communications to include Video Teleconferencing (VTC), Instant Messaging (IM), voice over IP (VoIP) on several networks, some analog phone services, and video streaming within the Enterprise, supporting a 24x7 NOC (Network Operations Center). Responsibilities: Familiarity with the use of Cisco Unified Communications Manager (CUCM), Multipoint Control Unit (MCU), Telepresence Management Suite (TMS) and various other tools as required; will become familiar with the use of VC Wizard. Technical knowledge of VoIP / analog telephony systems, software, hardware, and Telecommunications standards, Cisco Unified Communications Manager. Technical knowledge of instant messaging systems, preferably Cisco Jabber. Technical knowledge of video streaming to include set top box and Vbrick. Technical knowledge of VTC equipment such as Cisco Telepresence Management Suite, Tandberg and Cisco CODECs and MCUs. Comprehensive knowledge of network topology; along with networked hardware and software tools listed above. Familiarity with VTC service and support to include scheduling, monitoring, administrative support and technical assistance to customers. Manage resource availability and conflicts for Video Networks. Possess understanding of TCP/IP, H323, E164 and SIP protocols. Ability to troubleshoot common UC issues to include identifying and correcting issues with endpoints, bandwidth saturation, profiles and misconfigurations. Assist in the development of the training, local guides, Rules of Engagement (ROE) policies and Standard Operating Procedures (SOP) as they pertain to the UC environment. Ensure compliance with network security policies and procedures. Create and report all outage notifications and network related issues according to standard operating procedures. Provides system/equipment/specialized training and technical guidance to lower skill level employees. Provide After Action Reports (AARs) for Problem Management resolution Required Qualifications: TS/SCI clearance with the ability to gain and maintain a CI Poly. Bachelor's degree and 4 years' experience Must have and maintain a DoD 8570 compliance or Information Assurance certification commensurate with technical objectives and services required within the task order prior to start. Certification Preferences: Network+ CCNA CCNP Collaboration (Highly Desired) ITIL Foundations Key Competencies: Interpersonal Skills Effective Communication skills - verbal and written Listening skills Problem analysis and problem solving Attention to detail and accuracy Customer Service oriented Ability to work independently within a Team Concept Ability to multitask in a stressful environment Flexibility Requirement: NOC is 24x7 shift work; to include weekends and holiday for all employees Day Shift: 6am - 2:30pm Swing Shift: 2pm - 10:30pm Mid Shift: 10:30pm - 6am At Omni Technology Group LLC, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success.

Apply Medical Instrument Technician (Polysomnography) Department of Defense Military Treatment Facilities under DHA Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply About the Position: This positions are located in the Department of Medicine, Sleep Laboratory Clinic at Evans Army Community Hospital in Fort Carson, Colorado. This is a Direct Hire Solicitation Summary About the Position: This positions are located in the Department of Medicine, Sleep Laboratory Clinic at Evans Army Community Hospital in Fort Carson, Colorado. This is a Direct Hire Solicitation Overview Help Accepting applications Open & closing dates 12/12/2025 to 01/23/2026 Salary $56,789 to - $73,831 per year Pay scale & grade GS 8 Location 1 vacancy in the following location: Fort Carson, CO Remote job No Telework eligible No Travel Required Not required Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time Service Competitive Promotion potential None Job family (Series) * 0649 Medical Instrument Technician Supervisory status No Security clearance Other Drug test Yes Position sensitivity and risk Non-sensitive (NS)/Low Risk Trust determination process * Credentialing * Suitability/Fitness Financial disclosure No Bargaining unit status Yes Announcement number HSJW-26-12848691-DHAR Control number 852292800 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Duties Help * Independently prepares, calibrates, interfaces, and operates all equipment used in polysomnographic procedures. * Operates polysomnographic recording instruments to obtain an electroencephalographic record of patients sleep. * Prepare the patient for tests reassuring the patient, providing basic education concerning the nature of the testing, allaying fears, or misconceptions. * Makes minor repairs and performs operator level maintenance to the equipment used for sleep disorders evaluation. * Post calibrates all the equipment used for the polysomnographic procedure. * Independently interprets data obtained from all night recording. Requirements Help Conditions of employment * Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation. * One year probationary/trial period may be required. * This position has been designated as a Drug Testing Designated Position and is subject to a pre-employment screening and random testing thereafter. * Child Care Background Check Required for this Position. * Must be able to obtain and maintain Basic Life Support (BLS) Training and Certifications from the American Heart Association and the American Red Cross within 6 months of hire. * Nights, weekends, and holiday work is required. (Shift work is required) * A pre-employment physical is required. * This position is covered by Health Affairs Policy 97006, 23 Oct 96 the position requires the employee to obtain Hepatitis B immunizations and Tuberculin testing unless exempt by physician. * Employee will be required to wear and use personal protective equipment as required and provided by the employer. * This position has been designated "Mission Essential". In the event of severe weather conditions or other such emergency type situations the incumbent may be required to report to work or remain at work as scheduled to support mission operations. * This position has a mandatory seasonal influenza vaccination requirement and is therefore subject to annual seasonal influenza vaccinations. Qualifications Who May Apply: US Citizens In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Licensure/Certification: A certified Polysomnography Technologist, Preferred Registration by the Board of Polysomnography Technologists (BRPT) is highly desired. Please upload certification. Failure to upload will result in disqualification. Specialized Experience: One year of specialized experience which includes conducting comprehensive evaluation and treatment of sleep disorders, including in center and home sleep apnea testing; diagnostic and therapeutic interventions; AND operating, monitoring and maintaining equipment. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07). Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: ********************************************************************************************* Additional information * Male applicants born after December 31, 1959 must complete a Pre-Employment Certification Statement for Selective Service Registration. * You will be required to provide proof of U.S. Citizenship. * One year trial/probationary period may be required. * Direct Deposit of Pay is required. * Multiple positions may be filled from this announcement. * Salary includes applicable locality pay or Local Market Supplement. * If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. * Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help Review our benefits How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Veterans and Military Spouses will be considered along with all other candidates. Benefits Help Review our benefits Required documents Required Documents Help The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: * Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. * For each relevant work experience, make sure you include the employer's name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position. * Use plain language. Avoid using acronyms and terms that are not easily understood. The hiring agency will not make assumptions about what's in your resume. * If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy. * For additional information, to include formatting tips, see: What to include in your resume. 2. Other supporting documents: * Cover Letter, optional * Most recent Performance Appraisal, if applicable * License/Certification: This position requires a job-related license or certification. You MUST submit a copy of your license or certification with your application package or you will be rated ineligible. See: Transcripts and Licenses. NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section below. * The complete application package must be submitted by 11:59 PM (EST) on 01/23/2026to receive consideration. * To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application (********************************************************** * Follow the prompts to select your resume and/or other supporting documents to be included with your application package. As a reminder, your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For additional information, refer to the 'Required Documents' section. * You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. * After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. * You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. Your resume selected in USAJOBS will be included, but you must re-select other documents from your USAJOBS account or your application may be incomplete. * It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan. * Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center. To verify the status of your application, log into your USAJOBS account (****************************************************** all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: *************************************************** Agency contact information Army Applicant Help Desk Website ************************************************* Address JT-DD83CJ CONTINENTAL DHN - EVANS DO NOT MAIL Fort Carson, CO 80913 US Next steps If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: * Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. * For each relevant work experience, make sure you include the employer's name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position. * Use plain language. Avoid using acronyms and terms that are not easily understood. The hiring agency will not make assumptions about what's in your resume. * If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy. * For additional information, to include formatting tips, see: What to include in your resume. 2. Other supporting documents: * Cover Letter, optional * Most recent Performance Appraisal, if applicable * License/Certification: This position requires a job-related license or certification. You MUST submit a copy of your license or certification with your application package or you will be rated ineligible. See: Transcripts and Licenses. NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Eligible candidates may qualify for a sign-on bonus as part of our competitive compensation package. Onward Energy / Fountain Valley Power values the expertise and impact of top talent-apply today to explore this opportunity. POSITION DESCRIPTION Job Title: Instrument & Control Technician II (Senior Technician) Reports To: Operations & Maintenance Manager Direct Reports: No Functional Unit: Operations FLSA Status: Non-Exempt Position Type: Full-Time Plant Location: Colorado Springs, CO region Onward Energy / Fountain Valley Power is proud to offer a highly competitive compensation package that includes a robust benefits program and a performance-based bonus plan. Our benefits are designed to support the well-being of our employees and their families, while our bonus structure rewards individual and team contributions that drive our mission forward. THE COMPANY Onward Energy is an independent power platform that owns and operates over 7 GW of utility-scale wind, solar and natural gas generation projects across the U.S. Our Vision is to reliably power a sustainable future. Our Mission is that as North America's premier independent power generator, we will deliver renewable and reliable power to our customers, opportunities to our employees, sustainable returns to the families who invest in us, and a better world to the next generation. Corporate Offices in Denver, New York and Charlotte, we are where renewable meets reliable. See ******************** for more information. The Fountain Valley Facility is a 240 MW simple cycle, natural gas-fired, peaking facility with a PPA with PSCo to 2032. The plant is located in Fountain, Colorado. Adjacent to the Fountain Valley Facility is 145 vacant acres of land for future development. THE CHALLENGE Perform operations, testing, maintenance and administrative functions of a distributive control system (DCS) and all associated field devices including the Continuous Emission Monitoring System (CEMS) for a simple cycle gas power plant. THE RESPONSIBILITIES Administers processes and procedures as required by the O&M Manager, which includes: Identify and implement On-condition tasks. Evaluate recommended changes based on cost/benefit. Specify instrument and electrical changes as required. Required to complete the O&M Tech I qualification process. Qualification is required within 2 years of date of hire. Work safely, following company and operator policies, procedures, and work practices in a positive, cooperative, and productive manner. Computes and analyzes test data. Use installed and portable test equipment and technical manuals to troubleshoot equipment and systems. Monitor, maintain and review all system startup procedures to determine control and electrical personnel support requirements. Coordinates job activities relating to job planning, work methods, job standards and job reporting for the work assigned. Perform both routine and non-routine preventative and corrective maintenance on plant equipment. Assist other plant personnel as needed. Maintenance and upkeep of site buildings and grounds. Maintain, calibrate and repair plant instrumentation and control devices. Prepares, maintains and provides a variety of reports/documents as required or upon request. Reviews P&I Drawings and logic diagrams. Communicates condition of plant systems, equipment and pertinent information to others. Coordinates job activities relating to job planning, work methods, job standards and job reporting for the work assigned. Creates procedures related to instrumentation and electrical systems. Directs and performs work in accordance with policies and procedures as established by the company and regulatory agencies. Operate all plant mobile equipment, forklift, man lift, etc. Maintain documentation records of calibration, tests and certification of electrical and instrument equipment. May be required to support job responsibilities as needed outside of scheduled work hours. Occasional travel may be required. Other duties as assigned. THE PROFILE TO SUCCEED A two-year technical degree and a minimum of 5 years of power plant and/or industrial electrical, instrumentation or electronics experience is required. In lieu of a degree, significant power plant and/or industrial electrical or electronics experience may also qualify an applicant for this position. Experience with Distributed Control Systems (DCS), GE Mark VI and ABB Bailey INFI 90, Various PLC Controllers, Teledyne Monitor Labs CEMS controls and equipment. Programming and configuration capabilities preferred. Knowledge of equipment operating limits, parameters, operating procedures and systems. Performs corrective actions if limits are exceeded. Working knowledge of combined cycle power plant system, power plant operations, and maintenance, electrical principles, work practices, procedures and materials. Ability to interpret control drawings and P&ID's. Ability to make maintenance related decisions with minimum direct supervision. Knowledge of instrumentation test equipment, signal generators, relay tests sets, oscilloscopes and computers. Knowledge of industry related CEM System hardware, software and reporting. Strong verbal and written communication skills and interpersonal skills and possess the ability to learn. Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity and mathematics. Ability to follow both verbal and written instructions. Ability to exercise good judgment and make sound decisions. Excellent organizational skills with attention to detail, accuracy, and timeliness. Strong analytical and problem-solving skills. Ability to demonstrate basic computer knowledge of Word, Excel, Power Point and various other programs. Must be able to interact and communicate well with individuals in all areas of the company and outside vendors. Valid U.S. Driver license with acceptable MVR history, if applicable. THE PHYSICAL REQUIREMENTS Must be able to accomplish physical requirements with or without reasonable accommodation Adhere to large amounts of standing, walking, bending, squatting, and lifting. May be required to lift, carry, and move up to 50 lbs. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. Will occasionally work at heights, climb ladders, stairways, and work from platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Able to hear (at some dB limit of loss) plant alarms, equipment condition, and to receive oral instructions. Able to see to determine plant operating conditions and to avoid safety hazards. THE TEAM The Onward Energy team is comprised of industry professionals who embrace our values of accountability, adaptability, collaboration, and excellence. At Onward Energy, we seek to find solutions rather than assign blame. THE WORK ENVIRONMENT Performing this job without full/focused attention may cause serious injury or even fatality. Work is generally performed inside the power plant but may work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain and snow. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. People standing, walking, sitting, signaling and talking. Bells, whistles and alarms. THE TOTAL REWARDS Onward Energy total rewards philosophy is motivated by a key tenet of People First, and offers employees a comprehensive total rewards package which includes market competitive compensation, health, life insurance, and retirement savings benefits. If you require an accommodation for any part of the employment process due to a disability to ***************************. EEO STATEMENT: Onward Energy is an Affirmative Action Employer, Females/Minority/Veterans/Disabled/Sexual Orientation/Gender Identity. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

If you are a detail oriented individual with experience in home improvements join the Champion Windows team! We currently have an opening for Service and Measure Technician. This position is responsible for accurately measuring the customer's home for installations and being responsible for completing service jobs. Your specific duties as a Service and Measure Technician will include: Measure customer's homes and record measurements Repair windows, siding, and sunrooms Order and track repair and installation services Provide daily service sheets to employees within the office Assist Management reporting and communication, as requested Interact and assist homeowners to service their home-improvement needs As a Service and Measure Technician you must have experience in home improvement and be able to correctly measure. Attention to detail and self motivation are critical for success in your role. Specific qualifications for the Service and Measure Technician position include: High School Diploma or GED equivalent 1 or more years in home improvement/construction Ability to safely assist in home improvements and repair Excellent written and verbal communication skills Ability to correctly use tape measure and record measurements Clean driving record and valid driver's license Benefits: As a Service and Measure Technician with Champion Windows, you will be part of an organization with a strong focus on providing excellent customer service as well as a high-quality made in America product. Your benefits as a Service and Measure Technician Include: Health insurance Dental insurance Disability insurance Flex spending account 401(k) Champion Window is an Equal Employment Opportunity Employer

Astek is accepting resumes for a part-time, temporary Electronics Technician reporting to Astek's Manufacturing Engineer in Colorado Springs, CO. Electronics Technician Responsibilities: * Production test processing of electronic boards and chassis * Troubleshoot and repair defects in printed wiring boards and electronic chassis * Inspect electronic boards to IPC class 2 requirements * Perform component level rework, including fine pitch component replacement, wire-adds and pcb repairs * Provide test station maintenance and upgrades and keep their software and operating systems up to date * Provide manufacturing tryouts for new or updated manufacturing test software and for new firmware * Update firmware on existing stocked product that needs the latest firmware loaded before shipment * Assist with writing test and assembly procedures, and review/improve existing procedures * Contribute to production yield reporting * Assist with packaging and shipping Astek products Basic Skills Requirement: * Component level troubleshooting and repair * Fine pitch soldering and rework * Light assembly * Ability to read schematic, and perform rework based on schematic markups without assistance * Experience running test programs for electronic products using windows platforms * Good fundamental knowledge of electronics * Experience with the use of laboratory equipment such as oscilloscopes and multimeters * Ability to identify circuit board and circuit assembly defects, such as solder shorts, bad solder joints and damaged or contaminated components Candidates must have US citizenship or current authorization to work in the US. At this time, Astek is not offering travel expenses for interviews or relocation expenses and candidates should already be located in the Colorado Springs area. Interested applicants should email a resume and a short cover letter describing your background and any points of emphasis that you feel would make you an ideal candidate for Astek to This email address is being protected from spambots. You need JavaScript enabled to view it..

Job DescriptionBenefits: 401(k) Competitive salary Health insurance Opportunity for advancement Paid time off Profit sharing Training & development Tuition assistance Foss Industries, Inc, celebrating over 40 years in business in Colorado Springs, is excited to offer opportunities for motivated applicants to join our team! We provide repair services to semiconductor and other high-tech manufacturers around the world. Examples of items we service: RF Generators and Match Networks Printed Circuit Boards Power Supplies Chillers Robots Valves Displays .and much more! We are seeking Entry Level and Senior Level Positions. Desired capabilities/traits for applicants may include: Ability to read schematics and technical documents Ability to follow and develop procedures Detailed note keeping and attention to detail Ability to solder both through-hole and SMT Capabilities using oscilloscopes, DMM, function generators, spectrum analyzers, and other test equipment Ability to troubleshoot to the component level (ICs, caps, diodes, resistors, etc.) Test fixture development We are a small company with BIG company benefits: Excellent benefits package (Medical Insurance, PTO, 401K, Paid Holidays, and more) Typical schedule is M-F with some flexibility Competitive pay scales (DOE) Opportunities for growth and advancement A GREAT TEAM! Friendly work environment We look forward to hearing from you! Please send your information to: ****************. This is a great opportunity!

Fulltime career opportunity for an Electrical Engineer that will support design of consumer electronics products. Company's technology is utilized in award winning products at CES. This is a rare opportunity to learn directly underneath a Sr. Level engineer who is retiring. This engineer will learn high tech IOT applications. Another attractive aspect to this opportunity is the stability. No one ever quits, as they continue to grow their career within the company. There are rarely opportunities available, so this one is special. Responsibilities Include: Support customers during product evaluation, design-in and production ramp-up, including on-site support when required Together with our Business development team promote products during exhibitions and customer visits Develop and maintain demonstration, evaluation and starter kits as well as promotional material Competitive benchmarking and analysis both through hands-on measurements and analysis Contribute to silicon validation of new ICs together with design team Contribution to customer returns analysis in a multi-disciplinary team together with quality, design and test engineers. Building new and maintaining our strong existing links in the RFID community and customer base Support the business development team with new product introduction & go-to-market strategy. Qualifications and Requirements: Education: BSEE from an established university; MSEE or advanced coursework preferred. Minimum of 3 years of experience in product development (HW/SW) or apps engineering Strong electronics and/or radio-frequency engineering background Excellent communication and presentation skills, at ease in front of the customer Able to work effectively with local and remote (European) design team members. Ability to contribute to a multi-disciplinary team in a constructive and data-driven approach An understanding of RFID systems and communication protocols and, skills in Android and/or iOS app and embedded FW development would be a plus Travel: Approximately 20% of travel to customer sites, trade shows/conferences, and/or parent company located in Europe will be required. Relocation assistance is provided.

At CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician) $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician) $ 38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must posses an electrical journeyman license or equivalent education/experience. Relocation Assistance available between $5,000- $10,000 depending on location Shift differential ___________________________________________________________________________ Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification Complete the RMSM training program to become skilled in all three of the crafts mentioned above Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings Observe lockout procedures Keep work area and equipment clean and orderly Perform routine maintenance and assisting Maintenance personnel Operate overhead cranes as needed Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants Obtain and maintain OSHA 10 and equipment certifications, as required Requirements Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician) 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred Valid Colorado license and mobile equipment qualification Strong troubleshooting, repair and installation skills Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 3/1/2026 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! Competitive wages and bonus opportunities Family medical, dental, and prescription coverage at minimal employee cost Short and long term disability programs Competitive retirement plans Flexible Spending and Health Savings Accounts Employer-provided and Voluntary Life Insurance options Paid vacation and recognized statutory holidays Apprenticeship and career advancement within the company Tuition reimbursement Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail ********************** or call: **************. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

BAS Controls Tech III (Building Intelligence Specialist) - Colorado Springs, CO - $50-$65/hr + Company Vehicle About the Opportunity: A respected commercial HVAC, building automation, and energy solutions firm is seeking an experienced Controls Building Intelligence Specialist to support their operations in the Colorado Springs region. This senior-level position is ideal for a BAS expert with deep hands-on experience programming and commissioning Niagara systems, integrating older control platforms, and guiding junior field technicians. The role includes a company vehicle, excellent benefits, and strong long-term career stability with a highly regarded employer. Position Details: Title: BAS Controls Tech III (Building Intelligence Specialist) Location: Colorado Springs, CO (territory spanning Larkspur to Pueblo) Pay: $50.00 - $65.00/hr Bonus: Not applicable Experience: 8+ years, Niagara Certification required Company Vehicle: Provided Company Overview: Established for more than 50 years with over 200 employees. Union shop known for excellence in HVAC and BAS solutions. Industries served: Commercial, Education, Healthcare, Data Centers, Entertainment, Light Industrial, and Religious Facilities. Services include: Preventative Maintenance, HVAC Mechanical Services, Building Automation, Building Analytics, and Energy Audits. Supported BAS platforms: Niagara, JCI, Distech, Siemens, Honeywell, and other open systems. Regional offices in Denver, Fort Collins, Colorado Springs, and Phoenix. Responsibilities: Program, test, and commission BAS systems according to specifications. Lead integration of legacy control systems into modern BAS platforms. Troubleshoot controller, network, and integration-level issues. Calibrate sensors, actuators, and other system components. Oversee BAS project execution to ensure quality and efficiency. Collaborate closely with installers, subcontractors, and customers. Utilize building analytics to enhance system performance and energy efficiency. Provide training, leadership, and mentorship to junior technicians. Perform advanced programming and integration using Tridium Niagara. Ideal Candidate: Seasoned BAS professional with 8+ years in programming, commissioning, and troubleshooting. Niagara Certified with proven, hands-on Niagara experience. Strong background integrating legacy systems and applying building analytics. Demonstrated leadership and mentoring capabilities. Excellent communication and customer interaction skills. What's Offered: Competitive hourly rate: $50.00 - $65.00/hr Company vehicle and required tools 401K retirement plan with company match Comprehensive benefits including Medical, Dental, Vision, HSA, Life, Disability, and more 3 weeks PTO + 7 paid holidays Additional perks: Gym reimbursement, Rockies tickets, and company events How to Apply: If you are an experienced BAS professional with strong Niagara capabilities and a passion for building intelligence systems, apply today to join a respected HVAC and BAS provider in Colorado Springs.

Type: Non-Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $38.74 - $38.74 /hourly Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of an Engineering Technician II at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 22 paid days of vacation at the start of employment. Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera seeks an experienced Engineering Technician II to lead mechanical, electrical, and plumbing (MEP) maintenance and reliability efforts at the United States Air Force Academy. In this role, you'll champion MEP asset management strategies-integrating CMMS, IoT sensors, and automation tools-conduct advanced system inspections, develop repair plans and technical specifications, and mentor junior technicians. Your expertise will drive preventive maintenance optimization, root-cause analysis, and ISO 55000-aligned asset initiatives to keep critical infrastructure mission-ready. Typical duties include but are not limited to: Configure and optimize CMMS (Maximo), RPA workflows, and BI dashboards for MEP asset management. Inspect HVAC, electrical distribution, plumbing, and fire‐protection systems; document issues and recommend corrective actions. Partner with MEP craftsmen to plan, execute, and verify maintenance tasks aligned with mission objectives. Develop and maintain job plans, CAD/Revit drawings, and technical specifications for MEP repairs and upgrades. Lead reliability initiatives-RCA, PM optimization, condition monitoring, ISO 55000-based asset analysis, and project prioritization. Mentor technicians, enforce USAFA/OSHA safety standards, and coordinate cross‐functional teams. Qualifications: Minimum 3-5 years of hands-on experience as an engineering technician in mechanical, electrical, and plumbing systems maintenance, reliability, and asset management. Associate degree in Civil Engineering Technology, Structural Engineering Technology, or related field; or equivalent military technical training required Bachelor's degree Mechanical, Electrical, Civil, or Facilities Engineering Technology-or a related field-is preferred. Proficiency with CMMS tools (IBM Maximo or equivalent), RPA platforms (e.g., UiPath), BI solutions, and IoT sensor technologies. Skilled in AutoCAD, Revit, or similar CAD software; strong grasp of MEP design principles and applicable building codes. Demonstrated ability to perform RCA, PM optimization, and data-driven asset performance analysis. Proven leadership: mentoring junior staff, coordinating federated teams, and communicating technical results to stakeholders. NICET certification or equivalent engineering-technician credential is a plus Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

* TS/SCI clearance required * BICSI Technician Certification required The Engineering Technician III will be supporting the buildup and modernization of USSC (United States Space Command) facilities around Colorado Springs. The purpose of this task is to provide Command, Control, Communications, Computers and Intelligence (C4I)/Information Technology (IT) electronic systems equipment, infrastructure, engineering, design, installation, and Supply and Warehouse support to Naval Information Warfare Center Pacific (NIWC Pacific) during design, installation, configuration, and transition to operations of the IT infrastructure for multiple facilities throughout the period of performance. Services required include design, installation, termination, test, and documentation of desktop devices, peripherals, IT cable plant, rack, power distribution units (PDU) and incident to the installation of C4I/IT electronic systems, installation of C4I/IT electronic systems equipment as assigned and in accordance with government installation design plans (IDP), the NIWC Pacific Shore Installation Process Handbook (SIPH) and project sponsor processes and associated logistical support. The work described herein is conducted within existing classified office spaces, IT data centers, IT telecommunications spaces or other spaces designated to house C4I/IT electronics systems equipment and newly constructed secure building. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS * The ability to obtain, maintain and access classified information at the TS/SCI level. * BICSI Technician Certification * CTS preferred * CTS-D preferred * CTS-I preferred * Operational knowledge of Personal Computer Systems and Microsoft Office Suite * Practical knowledge of construction, service maintenance and operation procedures of IT and AV related systems and equipment. * Practical knowledge of IT and AV installation methods and techniques. * Knowledge of AV equipment assembly and testing. * Technical proficiency and effective problem-solving skills. * Excellent verbal and written communications skills with ability to create and interpret a variety of technical materials. * Excellent customer service and relationship-building skills and ability to effectively interact with others in the performance of assigned duties. * Ability to prepare, read and interpret engineering drawings, schematic diagrams and technical directives. * Ability to execute scheduled tasks with team. * Willingness and ability to learn new concepts and techniques. * Ability to effectively work both individually and in a team environment. * Ability to travel to client worksites on as needed basis within a 50-mile radius from the home duty station ESSENTIAL DUTIES AND RESPONSIBILITIES Essential duties and responsibilities include the following. Other duties may be assigned. * The Engineering Technician will provide support for cabling, equipment and C4ISR system installations. Pulls, terminates and dresses Category 6A and Fiber Optic cabling. Installs and documents IT equipment, cable conveyance, antennas and supporting systems. * Maintains required technical abilities to meet the demands of the job per instruction provided by team lead. * Contributes to all phases of the AV and IT infrastructure installation or upgrade as deemed appropriate by team lead. * Pulls and dresses fiber optic and Category 6A copper cables. * Installs of racks/cabinets/credenzas and all peripheral equipment. * Racks and stacks of equipment in racks/credenzas. * Terminates copper cable up to CAT6A and SM/MM Fiber single strand to MPO/MTP. * Helps to solve issues related to cables and networks with guidance and/ or instruction. * Tests and documents of all cables. * Installs of Thinklogical, Extron and Creston AV Matrix Routing and Extension Solutions. * Installs per a SIPH standard IDP, adapt/troubleshoot/modify where necessary, and provides redlines back to an AutoCAD drafter for As-built updates with proper guidance and instruction from team lead * Works with the team and is advised on ways to resolve technical/physical issues often requiring coordination with other disciplines: networking, facilities, HVAC, electrical, security, etc. * Conducts and documents PITCO activities as instructed. * Performs instructed assignments that are not completely standardized or prescribed as guided by the team lead. * Adapts standard procedures or equipment, using fully applicable precedents prescribed by team lead. * Receives initial instructions, equipment requirements, and advice from team lead, supervisor, engineer, as needed. Work is reviewed for technical adequacy or conformity with instructions. * Provides support in the demolition and disposal of current powers system equipment under supervision and instruction of electrician maintenance. * Conducts performance tests of IT and AV systems. EDUCATION / EXPERIENCE Associate degree, technical certification and/or a minimum of three (3) years' related experience supporting cabling, equipment and IT Network System Installation. Minimum three (3) years of troubleshooting and repairing systems. Minimum three (3) years' experience in using Microsoft office and other AV software programs; or equivalent combination of education/experience. PHYSICAL DEMANDS Work is primarily performed in a factory, machine shop or construction environment. The ability to verbally communicate alarms or warnings clearly, concisely, loudly and quickly, to clearly and quickly hear or otherwise sense alarms or warnings and take appropriate action. Frequently required to maintain equilibrium to prevent falling when moving, walking, standing, kneeling or crouching - particularly on narrow, uneven, irregular, slippery surfaces, going up or down ladders, stairs, scaffolding, ramps, poles or other objects using hands, arms, feet or legs. Frequently required to bend the body downward and forward, bending leg and spine - working in a bent over position. Frequently required to sense physical attributes such as size, shape, temperature, texture or sharpness of an object by touching. Frequently required to grasp, grip or apply pressure to an object with the fingers and palm, holding an object in the hand. Frequently required to lift, raise or lower objects in a vertical direction, particularly heavy or bulky objects. Moving objects backward, forward, in or out in a horizontal direction, particularly heavy or bulky objects. Pulling, exerting a steady backward, downward, upward or outward force against an object - jerking, plucking, wrenching, stretching, towing, drawing, dragging or tugging objects in a sustained motion. Pushing, pressing against something with steady forward, downward, upward or outward force - shoving, pushing, compressing, squeezing, mashing, packing, pressing, jamming, compacting, or squashing objects in a sustained motion. The ability to see and distinguish colors, to visually distinguish shapes and patterns, to accurately sense distances (depth perception), to accurately see objects and detect motion at wide angles (peripheral vision). Frequently uses the lower extremities and back muscles and moving on foot, particularly for long distances. May have exposure to indoor/outdoor adverse weather conditions. Frequent exposure to noise - workers must wear protective hearing equipment or frequently shout in order to be heard above the ambient noise level. Exposure to pollutants or allergens which can adversely affect the skin and/or the respiratory system such as gases, smoke, odors, mists, fumes, dust, chemicals, oils or solvents. Exposure to hazardous working conditions including moving machinery, electricity and/or working in high places. May be exposed to hot objects, flames or sparks. The job requires the use of protective equipment such as hard hats, respirators, aprons, gloves, special clothing, safety shoes and safety glasses The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet * Please note, that this position is contingent upon the award or funding. The essential duties, experience, education requirements, and salary are subject to change.* The estimated pay range for this role is $25.55 to $33.03 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * Family Planning/Fertility Assistance * STD/LTD/Basic Life/AD&D * Legal-Aid Program * Employee Assistance Program (EAP) * Paid Time Off (PTO) - (11) Federal Holidays * Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI

Job Description PHASOR USA LLC. is a subsidiary of Quanta Services specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated and experienced Electrical Engineering Technologist, PSE, or Engineer to join our field services team on a full time basis, initial work sites will be based around the Denver, CO area. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agree to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: Testing and commissioning of MV/HV power system protection & control schemes in the utility, power generation, and oil & gas industry. Read and interpret drawings and troubleshoot / resolve technical issues. Train/develop employees to ensure highest performance standards are met. Report preparation and submission. Assist with generation of commissioning startup procedures or work instructions. Ensure compliance with all safety practices as per corporate, client, and industry standards. Initiate and/or respond to customer inquiries, discuss trouble details and confirm resolutions. Qualifications: The successful candidate should possess a Bachelor's Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute. Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks. Minimum 5+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations. Relay testing of microprocessor-based protection IED's (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management. Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT's, PT's, surge arrestors, disconnect switches, cap and reactor Banks, etc. Testing and commissioning as per NETA/IEEE/IEC standards. Strong understanding of safety standards. Strong interpersonal and communication skills and an extreme attention to detail are essential. Knowledge of the Microsoft office software suite of programs coupled with strong computer skills. Excellent organizational skills and ability to manage a wide variety of issues simultaneously. Strong analytical, risk assessment and problem solving skills. NETA Testing Certification an asset. Background checks and Drug and Alcohol Pre-Access Testing will be required as part of employment. Requirements: Must be legally able to work in the United States, VISA Sponsorship is not available for this position. Valid driver's license with clean driving record. Ability to work for extended periods out of town. Additional Information: Working hours are generally from 7am - 5:30pm at 10hrs/day. Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required. Phasor USA LLC. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist AI is not used to screen or assess candidates. The role posted is for an active vacancy we have in Phasor but applications may also be used for future positions. Salary variations depend on factors such as qualifications, relevant years of experience, and current market conditions specific to the role. Salary range: $85,000-$135,000 (excepted yearly earnings may vary) Benefits Dental care Disability insurance Employee assistance program Extended health care Life insurance On-site parking Paid time off 401k Vision care Wellness program

SGP Recruiting provides both operations and strategic support to Tribal 8(a) and commercial organizations. Our client is a family of SBA-certified Native American Tribal 8(a) and multi-certified companies delivering IT, management consulting, and general construction solutions to the Federal Government and commercial sector. They are actively seeking a Engineering Technicians based in Colorado Springs, CO. This is a full-time, onsite position. This position requires an active Top Secret clearance with the ability to obtain Sensitive Compartmented Information (SCI). Engineering Technician 5 (Range $40-$45) (7) years of experience Engineering Technician 4 (Range $30-$35) (5) years of experience This is an exciting opportunity to be part of a team supporting a USSC NIWC contract in Colorado Springs, CO. The main responsibilities of the role include: Use hand and power tools to solder and crimp connectors along with various other IT and AV systems related tasks. Cabling installation of copper cable up to CAT6A and SM/MM Fiber Termination of copper cable up to CAT6A and SM/MM Fiber to MPO/MTP IT and AV rack installation and Wiring Projector and screen support structure installations. Mounting LCD/LED displays and video walls. Test point to point functionality of systems. Testing and recording of all cables. Travel to various job sites around Colorado Springs area. Candidates with experience installing systems on government sites will be rated more highly. Position requires a background check to include a DMV report, current and valid driver's license. Other duties assigned as needed. Skills and Abilities Effectively communicate with employees, customers, and colleagues. Ability to use hand and power tools in a safe and efficient manner. Ability to work and think independently and ensure to meet deadlines. Read and interpret electronic schematics and architectural blueprints. Education and/or Experience Minimum audio-visual installation experience required. Formal education in electronics or related field preferred. Minimum of a High School Diploma or equivalent required. External Training Avixa CTS and/or CTS-I certification, required. BICSI certification required. Vendor (Extron/AMX/Crestron/Biamp/Planar, CommScope, Corning, etc.) certification preferred. Clearance Requirement Technicians will be required to obtain SCI Government Security Clearance, most currently have Top Secret Clearance. Our client provides a variety of benefits including company-paid health, dental & vision insurance coverage, as well as additional employee-paid health insurance options; company-paid life and disability insurance; 401k retirement savings plan with employer match; 11 company paid holidays per year, and paid time off. Our client is committed to hiring and retaining a diverse workforce. They are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. They are committed to a collaborative, inclusive environment that encourages authenticity and fosters a sense of belonging. We are also committed to providing accommodations for persons with disabilities.

Fort Carson, Colorado, US Austin, Texas, US Fort Cavazos, Texas, US San Antonio, Texas, US Technician 12502 Full-Time None $5 - $200000 Description & Qualifications** Description & Qualifications** If you enjoy working on high profile and challenging engineering projects supporting the US Army,Serco hasa great opportunityfor you! TheEngineering Technicianwill be part of adynamicteam at our Fort Carson, CO location. Bring yourexpertiseand collaborative skills to make an impact towards our military defense and safety of our Soldiers. Serco supports the US Army as a primecontractorfor their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, andmaintainsmodern and mobile solutions for an integrated CP infrastructure. You will be partof ateam that works closely with the customer and other Serco functional area teams to deliver quality systemsand associated supporting documentation. The team has been recognized by the Army Customer and the industry for theiroutstanding contributions to the contract and program. In this role, you will: + Plan and performroutine andnon-routinehardwareassembly andintegrationassignments of substantial variety and complexitythatare typically part of broader assignments. + Construct components, subunits, or simple models;adapt standard equipment; troubleshoot and correct malfunctions + Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment + Performmoderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install,modify, and perform upgrades in support of C5ISR systems + Provide occasionalassistanceto related support areas including but not limited to kitting and warehouse operations + Use, care,andmaintaincrimp tools, heat gun, and various electrical and mechanical tools. + Troubleshoot basic electrical issues for equipment installed/integrated in military vehicles + Utilize various test, measurement, and diagnostic equipment (TMDE) (i.e.multimeters, clamp meters, spectrum analyzers, etc.) + Determineequipment malfunctionsand applyskill in restoring equipment operation + Fabricateorassistwith fabrication ofa variety ofradio frequency (RF), data, and power cables using solderingand crimp techniques + Assemble, integrate, and install various metal and electronic components + Read and interpret technical drawings for fabrication and installationof commercial and custom metal and electronic mounts and components + Apply your mechanical aptitude and experience with a range of hand and power tools + Occasionally work in austere conditions (field environments) + Travel to U.S. Army bases around the country to perform testing and maintenance on Army equipment installed by Serco Inc. To be successful in this role, you musthave: + A highschool diploma/GED with 3 years' of relevant experience + OR anassociatedegreewith1 year of relevant experience + Ability to travel up to 25%. Additionallydesiredexperience and skills: + Experience with military vehicles + Basic metal fabrication + Basic cable fabrication + Automotive/mechanical troubleshooting + Generator maintenance and troubleshooting + Experience with the integration of Army Tactical C5ISR systems and vehicle platforms + Fiber / BICSI / Certifications If you are interested in supporting and working with our military and a passionate Serco team,thensubmityour application now for immediate consideration. It only takes a few minutes and could change your career! **Company Overview** Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************ . If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email ********************* . Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. **Pay Transparency** Our Total Rewards package includes competitive pay, performance-based incentives, and benefits that promote well-being and work-life balance-so you can thrive both professionally and personally. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance. Program availability may vary based on factors such as contract type, location, hire date, and applicable collective bargaining agreements. Salary range: The hourly amount for this position can be found at the top of this posting. This role is covered by the Service Contract Act. For positions on this contract, we will pay the prevailing wage rate for the location in which the employee is working, as determined by the Department of Labor and the Wage Determination (WD). The wage rate will vary depending on the locality. Additionally, you will receive Health and Welfare Benefits based on the WD for the contract. Benefits - Comprehensible benefits for full-time employees (part-time members receive a limited package tailored to their role): + Medical, dental, and vision insurance + Robust vacation and sick leave benefits, and flexible work arrangements where permitted by role or contract + 401(k) plan that includes employer matching funds + Tuition reimbursement program + Life insurance and disability coverage + Optional coverages that can be purchased, including pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Employee Assistance Plan that includes counseling conditions + Specific benefits are dependent upon the specific contract as well as whether the position is covered by a collective bargaining agreement or Service Contract Labor Standards. To review all Serco benefits please visit: ******************************************* . Serco complies with all applicable state and local leave laws, including providing time off under the Colorado Healthy Families and Workplaces Act for eligible Colorado residents, in alignment with our policies and benefit plans. The application window for this position is for no more than 60 days. We encourage candidates to apply promptly after the posting date, as the position may close earlier if filled or if the application volume exceeds expectations. Please submit applications exclusively through Serco's external (or internal) career site. If an applicant has any concerns with job posting compliance, please send an email to: ******************** .

Facility Programmer/Engineer Technician II Subsidiary: KIRA Training Services Job Title: Facility Programmer/Engineer Technician II Labor Category: Non-Exempt | CBA (Union) Clearance Level: Public Trust Travel Requirement: Up to 5% Pay Rate: $38.74 per hour Health and Welfare: $8.21 - $11.15/hr up to 40 hours per week to be used towards health insurance premiums At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Primary purpose of this position is to perform updates to the Air Forces NexGen asset management database and produce reports as required, and performs cost estimates for Capital projects. Responsibilities: 3 years of Air Force Programming Experience Assists Programmer in Civil Engineering in complying with legal and regulatory requirements when finical programming MILCON, SRM O&M, Medical and NAF facility projects including preparing DD Form 1391s, Military Construction Project Data. Researches, interprets, analyzes, and applies proper Air Force Instructions (AFIs), especially AFI 32-1020, Planning and Programming Built Infrastructure Projects, Unified Facilities Criteria (UFC's), U.S. Code, guidelines, pamphlets, policies, letters, when finically programming facility and infrastructure projects. Monitors coordination/approval process for converting work requests into contract projects to include validating proper work classification during programming, design, and construction to ensure statutory project approval is obtained from the correct approval authority. Implements metrics and analyzes systems/processes to ensure actions are efficient, timely, and reviewed at critical points. Develop, plan, and ensure customer proponents justify capital improvement projects for USAFA facilities. Performs self-inspection in accordance with Air Force inspection criteria and prepares/presents detailed and comprehensive reports with any corrective action taken to the Portfolio Optimization Manager. Follows-up to ensure complete and quality resolution of discrepancies. Implement tracking procedures for all taskings and packages being coordinated. Ensures customer facility and infrastructure requirements are converted into facility projects that are properly documented, prioritized, authorized, approved, and funded (this is called “programming”) in accordance with all laws, policies, and regulations. This includes multiple facility funding sources such as Military Construction (MILCON), Sustainment, Restoration & Modernization (SRM) Operation and Maintenance (O&M), Medical, Non-Appropriated Funds (NAF) and Demolition. Maintains information in the NexGen asset management database and helps prepare presentations for and responses to installation leadership on facility project programs. Helps prepare initial planning cost estimates using parametric cost estimating tools for facilities and infrastructure maintenance, repair, and construction projects. Responsible for long, mid, and short-range project planning of tasks, providing day-to-day task management of subordinate programmers, and ensuring timely completion of tasks to meet all AF Civil Engineer Center, USAFA Staff, and internal program deadlines. Trains subordinates, project managers, other team members, and appropriate government personnel as appropriate on complex statutory driven programming requirements including NexGen asset management database, programming processes and procedures, document submittals, design reviews, executive secretariat responsibilities for running wing commander chaired Installation Facilities Board, other required meetings and AF required filing structure. Authorized to directly coordinate finical programming actions with government counterparts to ensure synchronized work efforts in building 5-year facility priority lists including planning, design, and construction projects. Responsible for daily task management of subordinate programmers. Adhere to company policies, procedures, and safety regulations. Performs other duties as assigned. Requirements: 2-5 years of experience working in Air Force Civil Engineering organizations or other military Services (Army, Navy, Coast Guard) Department of Public Works organizations providing programming, design, and/or construction documentation is preferred. Knowledge of the Civil Engineering and Air Force funding processes and funding sources including MILCON, O&M (SRM) and NAF. NAF funding includes privately funded and donor funded projects. Have a basic knowledge of Geo-base and proficiency with Microsoft Software (Excel, Word, Power Point, etc). Familiarity with Parametric Cost Engineering System (PACES) estimating software is strongly desired. BS degree in Architecture or Engineering from ABET accredited university program preferred. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Physical requirements include (but are not limited to) the ability to lift 60 pounds, pushing, pulling, carrying, stooping, bending, squatting, and reaching for long periods of time. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work may be performed indoors or outdoors in varying weather conditions. Must be able to work in confined spaces, at heights, and around various hazards with appropriate PPE. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law.

Facility Programmer/Engineer Technician II Subsidiary: KIRA Training Services Job Title: Facility Programmer/Engineer Technician II Labor Category: Non-Exempt | CBA (Union) Clearance Level: Public Trust Travel Requirement: Up to 5% Pay Rate: $38.74 per hour Health and Welfare: $8.21 - $11.15/hr up to 40 hours per week to be used towards health insurance premiums At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job description-it becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we support. Our growth fuels programs, services, and lasting value for the Tribe, making every success a shared one. For over 35 years THTBC and its subsidiaries has delivered essential services to federal clients across the globe. Whether supporting logistics, information technology, cyber security, or facilities operations, we are united by a shared mission: to create meaningful economic opportunity and growth of the Tlingit & Haida Tribes of Alaska. Together We Grow - One Mission, One Team - With a Commitment to Serve Scope of Work: Primary purpose of this position is to perform updates to the Air Forces NexGen asset management database and produce reports as required, and performs cost estimates for Capital projects. Responsibilities: 3 years of Air Force Programming Experience Assists Programmer in Civil Engineering in complying with legal and regulatory requirements when finical programming MILCON, SRM O&M, Medical and NAF facility projects including preparing DD Form 1391s, Military Construction Project Data. Researches, interprets, analyzes, and applies proper Air Force Instructions (AFIs), especially AFI 32-1020, Planning and Programming Built Infrastructure Projects, Unified Facilities Criteria (UFC's), U.S. Code, guidelines, pamphlets, policies, letters, when finically programming facility and infrastructure projects. Monitors coordination/approval process for converting work requests into contract projects to include validating proper work classification during programming, design, and construction to ensure statutory project approval is obtained from the correct approval authority. Implements metrics and analyzes systems/processes to ensure actions are efficient, timely, and reviewed at critical points. Develop, plan, and ensure customer proponents justify capital improvement projects for USAFA facilities. Performs self-inspection in accordance with Air Force inspection criteria and prepares/presents detailed and comprehensive reports with any corrective action taken to the Portfolio Optimization Manager. Follows-up to ensure complete and quality resolution of discrepancies. Implement tracking procedures for all taskings and packages being coordinated. Ensures customer facility and infrastructure requirements are converted into facility projects that are properly documented, prioritized, authorized, approved, and funded (this is called “programming”) in accordance with all laws, policies, and regulations. This includes multiple facility funding sources such as Military Construction (MILCON), Sustainment, Restoration & Modernization (SRM) Operation and Maintenance (O&M), Medical, Non-Appropriated Funds (NAF) and Demolition. Maintains information in the NexGen asset management database and helps prepare presentations for and responses to installation leadership on facility project programs. Helps prepare initial planning cost estimates using parametric cost estimating tools for facilities and infrastructure maintenance, repair, and construction projects. Responsible for long, mid, and short-range project planning of tasks, providing day-to-day task management of subordinate programmers, and ensuring timely completion of tasks to meet all AF Civil Engineer Center, USAFA Staff, and internal program deadlines. Trains subordinates, project managers, other team members, and appropriate government personnel as appropriate on complex statutory driven programming requirements including NexGen asset management database, programming processes and procedures, document submittals, design reviews, executive secretariat responsibilities for running wing commander chaired Installation Facilities Board, other required meetings and AF required filing structure. Authorized to directly coordinate finical programming actions with government counterparts to ensure synchronized work efforts in building 5-year facility priority lists including planning, design, and construction projects. Responsible for daily task management of subordinate programmers. Adhere to company policies, procedures, and safety regulations. Performs other duties as assigned. Requirements: 2-5 years of experience working in Air Force Civil Engineering organizations or other military Services (Army, Navy, Coast Guard) Department of Public Works organizations providing programming, design, and/or construction documentation is preferred. Knowledge of the Civil Engineering and Air Force funding processes and funding sources including MILCON, O&M (SRM) and NAF. NAF funding includes privately funded and donor funded projects. Have a basic knowledge of Geo-base and proficiency with Microsoft Software (Excel, Word, Power Point, etc). Familiarity with Parametric Cost Engineering System (PACES) estimating software is strongly desired. BS degree in Architecture or Engineering from ABET accredited university program preferred. Must possess and maintain a valid state driver's license and a safe driving record, in accordance with company policy, to operate vehicles or equipment as required for the position. Physical Demands / Work Environment: Physical requirements include (but are not limited to) the ability to lift 60 pounds, pushing, pulling, carrying, stooping, bending, squatting, and reaching for long periods of time. Must be able to work on-call, alternate, and extended shift schedules when necessary to meet the mission requirements, including weekends and holidays. Work may be performed indoors or outdoors in varying weather conditions. Must be able to work in confined spaces, at heights, and around various hazards with appropriate PPE. All candidates must successfully complete pre-employment screening, which may include but is not limited to a criminal background check, motor vehicle record review, and a 5-panel drug test, in accordance with company policy and applicable laws. Benefits: We offer a flexible benefits package including medical, dental, and vision plans, TRICARE Supplemental, critical illness coverage, employee discounts, wellness seminars, company-paid life and short-term disability insurance, optional long-term disability, paid leave, a 401(k) plan, and identity theft protection to support your health and financial well-being. For represented positions, the benefits and leave offered will be as defined under the applicable Collective Bargaining Agreement. Equal Employment Opportunity: We are proud to be an equal opportunity employer and comply with all applicable federal, state, and local employment laws. All applicants will be considered for employment without regard to race, color, religion, creed, national origin, gender, gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy, parental status, or any other characteristic protected by law.

DUTIES AND RESPONSIBILITIES: The following job functions are not all-inclusive. The employee will be required to perform other job-related tasks/responsibilities requested by the supervisor. Job duties may change as required by needs of the company. Review project instructions and blueprints to ascertain specifications, procedures and objectives. Compute mathematical formulas to develop and design detailed specifications for components or machinery using computer aided equipment. Coordinate with and consult other workers to design, layout, or detail components and systems to resolve design issues or problems. Conduct DXF preparation or modification as needed. Inspect lines or figures for clarity and correct erroneous drawings. Design scale or full-size blueprints of equipment and components. Layout and draw schematic, orthographic or angle views to depict functional relationships of components, assemblies, systems, and machines. Check the dimensions of materials, components or assemblies for conformance. Evaluate designs by measuring drawing dimensions and comparing with original specifications for conformance. Review and determine basic specifications from existing product calculators and worksheets. Collaborate with Customer Service, Engineering, and Manufacturing on coordination design and scheduling needs of the product to meet the customer's needs. Process shop floor changes as required using the appropriate procedures to provide proper documentation for production. Perform all clerical and application tasks associated with the Engineering department using the existing software and electronic processes including, but not limited to SAP, Excel, Work, and Outlook. Prepare drawings, BOMs, and necessary documentation to ensure smooth and accurate flow of product production. This requires working knowledge of SAP, Autodesk and Windows Office. Confirm and process replacement part orders to the extent of providing production with proper documentation. Perform other duties as assigned by Supervisor. Responsibilities are subject to change based on the supervisor's direction. Contribute and support to maintaining a safe work environment for yourself and your fellow co-workers and comply with all company policies and procedures as required. Ability to work under tight deadlines not limited to working overtime or alternate shifts. QUALIFICATIONS: Possess and display Interroll' s Values at all times: Long-Term Thinking Committed to Excellence Always Respectful Passionate about Customers Prefer 1 year of sales, customer service and/or data entry experience. Prefer 2 years of experience in a Manufacturing/Engineering environment, including drafting. Required Possess an associate degree or vocational certification training in computer design/drafting fields. Possess a knowledge of Autodesk, Microsoft Office and ERP systems. Willing to work the 2nd shift and occasional weekends. MISSION: To achieve sustained profitable growth through employee commitment to innovative products, quality processes and exceptional service. PHYSICAL DEMANDS: This position requires prolonged periods of sitting at a desk and working on a computer. Incumbent must be able to occasionally lift and carry up to 50 pounds. The employee is regularly required to use hands/fingers to feel, and handle; the employee must regularly reach with hands and arms. The employee is occasionally required to walk, stoop, kneel, crouch, crawl, talk and hear. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus. The noise level in the work environment is regular factory noises and is generally loud. Wearing the proper PPE (protective eyewear, ear plugs and steal toed shoes) is a requirement in most areas of this facility.

Type: Non-Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $35.97 - $35.97 /hourly Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of an Engineering Technician I at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 22 paid days of vacation at the start of employment. Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a dedicated, detail-oriented, and forward-thinking Engineering Technician I to drive structural maintenance and reliability initiatives at USAFA. In this entry-level role, you'll integrate and configure CMMS and digital maintenance platforms, conduct thorough building and infrastructure inspections, and assist in crafting job plans, drawings, and repair specifications. You'll also support preventive maintenance optimization and root-cause analysis through data-driven reviews, collaborate with engineers and operational teams to identify high-ROI improvement projects, and help ensure all structural assets remain safe, operational, and mission-ready. Typical duties include but are not limited to: Integrate and configure CMMS tools (e.g., IBM Maximo), mobile platforms, RPA, and BI solutions to streamline asset inspections, work scheduling, and eProcurement. Conduct structural inspections of buildings and infrastructure, document conditions and measurements, and assist in developing/updating job plans, drawings, and repair specifications. Support reliability processes-root cause analysis (RCA), preventive maintenance (PM) optimization, asset inventory, condition monitoring (including SMS), and IoT sensor integration. Coordinate and track RAM eLearning and professional development initiatives, promoting certification and team growth. Contribute to annual and strategic planning by identifying high-ROI reliability and recapitalization projects. Prepare routine reports and status updates for site leads, process owners, and the RAM director, and ensure compliance with USAFA and OSHA safety regulations. Qualifications: Minimum 1-3 years of relevant experience in structural maintenance, asset management, or reliability engineering Associate degree in Civil Engineering Technology, Structural Engineering Technology, or related field; or equivalent military technical training required Bachelor's degree in Civil Engineering, Civil Engineering Technology, or related discipline preferred Familiarity with IBM Maximo or similar computerized maintenance management systems Basic proficiency in AutoCAD, Revit, or equivalent CAD software Understanding of fundamental structural engineering principles and building codes Proficient in Microsoft Office suite; exposure to BI tools or dashboards Experience with robotic process automation platforms (e.g., UiPath) and IoT integrations Knowledge of ISO 55000 asset management standards NICET certification or equivalent engineering technician credential preferred Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

* TS/SCI clearance required * BICSI Technician Certification required The Engineering Technician IV will be supporting the buildup and modernization of USSC (United States Space Command) facilities around Colorado Springs. The purpose of this task is to provide Command, Control, Communications, Computers and Intelligence (C4I)/Information Technology (IT) electronic systems equipment, infrastructure, engineering, design, installation, and Supply and Warehouse support to Naval Information Warfare Center Pacific (NIWC Pacific) during design, installation, configuration, and transition to operations of the IT infrastructure for multiple facilities throughout the period of performance. Services required include design, installation, termination, test, and documentation of desktop devices, peripherals, IT cable plant, rack, power distribution units (PDU) and incident to the installation of C4I/IT electronic systems, installation of C4I/IT electronic systems equipment as assigned and in accordance with government installation design plans (IDP), the NIWC Pacific Shore Installation Process Handbook (SIPH) and project sponsor processes and associated logistical support. The work described herein is conducted within existing classified office spaces, IT data centers, IT telecommunications spaces or other spaces designated to house C4I/IT electronics systems equipment and newly constructed secure building. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS * The ability to obtain, maintain and access classified information at the TS/SCI level. * BICSI Technician Certification required * CTS preferred * CTS-D preferred * CTS-I preferred * Operational knowledge of Personal Computer Systems and Microsoft Office Suite * Practical knowledge of construction, service maintenance and operation procedures of IT and AV related systems and equipment. * Practical knowledge of IT and AV installation methods and techniques. * Knowledge of AV equipment assembly and testing. * Technical proficiency and effective problem-solving skills. * Excellent verbal and written communications skills with ability to create and interpret a variety of technical materials. * Excellent customer service and relationship-building skills and ability to effectively interact with others in the performance of assigned duties. * Ability to prepare, read and interpret engineering drawings, schematic diagrams and technical directives. * Ability to execute scheduled tasks with team members. * Willingness and ability to learn new concepts and techniques. * Ability to effectively work both individually and in a team environment. * Ability to travel to client worksites on as needed basis within a 50-mile radius from the home duty station. ESSENTIAL DUTIES AND RESPONSIBILITIES Essential duties and responsibilities include the following. Other duties may be assigned. * The Engineering Technician will provide support for cabling, equipment and C4ISR system installations. * Pulls, terminates and dresses Category 6A and Fiber Optic cabling. Installs and documents IT equipment, cable conveyance, antennas and supporting systems. * Support teammates to help the team meets required technical abilities. * Contributes to all phases of the AV and IT infrastructure installation or upgrade. * Pulls and dresses fiber optic and Category 6A copper cables. * Installs of racks/cabinets/credenzas and all peripheral equipment. * Racks and stacks of equipment in racks/credenzas. * Terminates copper cable up to CAT6A and SM/MM Fiber single strand to MPO/MTP. * Helps to solve issues related to cables and networks with minimal oversite * Tests and documents of all cables. * Installs of Thinklogical, Extron and Creston AV Matrix Routing and Extension Solutions. * Installs per a SIPH standard IDP, adapt/troubleshoot/modify where necessary, and provides * redlines back to an AutoCAD drafter for As-built updates. * Helps team to resolve technical/physical issues often requiring coordination with other disciplines: networking, facilities, HVAC, electrical, security, etc. * Conducts and documents PITCO activities. * Performs with guidance and/or instruction assignments that are not completely standardized or prescribed. * Adapts standard procedures or equipment, using fully applicable precedents per instruction of team leads * Receives initial instructions, equipment requirements, and advice from team lead, supervisor, engineer as needed and is able to implement instruction with minimal oversite. Work is reviewed for technical adequacy or conformity with instructions. * Provides support in the demolition and disposal of current powers system equipment under supervision of electrician maintenance. * Conducts performance tests of IT and AV systems. EDUCATION / EXPERIENCE Associate degree, technical certification and/or a minimum of five (5) years' related experience supporting cabling, equipment and IT Network System Installation. Minimum five (5) years of troubleshooting and repairing systems. Minimum five (5) years' experience in using Microsoft office and other AV software programs; or equivalent combination of education/experience. PHYSICAL DEMANDS Work is primarily performed in a factory, machine shop or construction environment. The ability to verbally communicate alarms or warnings clearly, concisely, loudly and quickly, to clearly and quickly hear or otherwise sense alarms or warnings and take appropriate action. Frequently required to maintain equilibrium to prevent falling when moving, walking, standing, kneeling or crouching - particularly on narrow, uneven, irregular, slippery surfaces, going up or down ladders, stairs, scaffolding, ramps, poles or other objects using hands, arms, feet or legs. Frequently required to bend the body downward and forward, bending leg and spine - working in a bent over position. Frequently required to sense physical attributes such as size, shape, temperature, texture or sharpness of an object by touching. Frequently required to grasp, grip or apply pressure to an object with the fingers and palm, holding an object in the hand. Frequently required to lift, raise or lower objects in a vertical direction, particularly heavy or bulky objects. Moving objects backward, forward, in or out in a horizontal direction, particularly heavy or bulky objects. Pulling, exerting a steady backward, downward, upward or outward force against an object - jerking, plucking, wrenching, stretching, towing, drawing, dragging or tugging objects in a sustained motion. Pushing, pressing against something with steady forward, downward, upward or outward force - shoving, pushing, compressing, squeezing, mashing, packing, pressing, jamming, compacting, or squashing objects in a sustained motion. The ability to see and distinguish colors, to visually distinguish shapes and patterns, to accurately sense distances (depth perception), to accurately see objects and detect motion at wide angles (peripheral vision). Frequently uses the lower extremities and back muscles and moving on foot, particularly for long distances. May have exposure to indoor/outdoor adverse weather conditions. Frequent exposure to noise - workers must wear protective hearing equipment or frequently shout in order to be heard above the ambient noise level. Exposure to pollutants or allergens which can adversely affect the skin and/or the respiratory system such as gases, smoke, odors, mists, fumes, dust, chemicals, oils or solvents. Exposure to hazardous working conditions including moving machinery, electricity and/or working in high places. May be exposed to hot objects, flames or sparks. The job requires the use of protective equipment such as hard hats, respirators, aprons, gloves, special clothing, safety shoes and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet The estimated pay range for this role is $30.34 to $44.16 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * Family Planning/Fertility Assistance * STD/LTD/Basic Life/AD&D * Legal-Aid Program * Employee Assistance Program (EAP) * Paid Time Off (PTO) - (11) Federal Holidays * Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI