Electronics technician jobs in Oak Forest, IL - 1,535 jobs

Controls Technician - Chicago Heights, IL Pay: $38 - $40/hr Shift: 1st Shift | Monday - Friday | 8a-5p We're looking for a skilled Controls Technician to support, maintain, and improve all plant electrical and control systems-including electrical, pneumatic, hydraulic, mechanical, and network subsystems. In this role, you'll act as a technical subject-matter expert, providing troubleshooting support, leading root-cause analysis, training maintenance techs across all shifts, and ensuring smooth operation of all production and facility systems. You'll work closely with the Maintenance Supervisor, Planner, and Manager to keep production on track, equipment running safely, and documentation up to date. What You'll Do Core Responsibilities Inspect, troubleshoot, repair, and maintain food processing and packaging equipment. Perform corrective, preventive, and scheduled maintenance on a wide variety of automated equipment. Diagnose and repair mechanical, electrical, pneumatic, hydraulic, and control-system issues. Install, program, and troubleshoot PLCs, HMIs, servo drives, VFDs, and related systems. Support and coordinate mechanical technicians during breakdowns and major repairs. Maintain accurate documentation on all controls systems-including hardware, software, and changes. Work safely using proper PPE and adhere to all HACCP, Allergen, Food Defense, and GMP policies. Perform inspections and repairs while equipment is operating on a live production schedule. Lead troubleshooting efforts during downtime and expedite equipment recovery. Maintain secondary plant systems (steam, chilled water, pneumatics, HVAC, electrical distribution, refrigeration, etc.). Write and update job procedures and frequencies within the CMMS (SAP). Train technicians on PLC/VFD/HMI troubleshooting using laptops and plant software tools. Occasionally travel for training, equipment work, or parts procurement. Keep the work area clean and report any potential contamination or unsafe conditions immediately. Key Technical Skills Skilled electrical troubleshooting (120V-480V). Strong understanding of PLC programming (RSLogix, FactoryTalk View, ladder logic). Experience with servo systems, VFDs, motor controls, HMIs, pneumatics, and hydraulics. Ability to read and interpret P&IDs, electrical single-line diagrams, loop drawings, termination diagrams, and mechanical layouts. Experience maintaining batching or continuous process systems and their networks. Ability to perform mechanical, plumbing, and instrumentation work at a semi-skilled level. Qualifications Previous experience as a Controls Technician, Automation Technician, or similar role in manufacturing (food industry experience preferred). Strong troubleshooting aptitude-electrical, mechanical, and automation. Ability to work in a fast-paced production environment under pressure. Excellent communication skills and teamwork mindset. Regular, predictable attendance. CMMS experience (SAP preferred): Create work order notifications Enter labor time Provide feedback for procedure updates Write job-specific procedures and task frequencies Apply now for immediate consideration for this Controls Tech position in Chicago Heights, IL . We Look forward to connecting with you!

The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. Responsibilities Install, service, and repair electromechanical equipment at customer sites, manufacturing facilities, and sales offices Utilizes hand tools and test equipment, such as multimeters, to perform work Effectively communicates technical issues and findings with the Engineering Department Performs in house phone troubleshooting support to customers May be required to provide after-hours phone troubleshooting support Will be asked to travel extensively, nationwide REQUIRED QUALIFICATIONS: Experience with industrial and commercial electrical systems Knowledge or experience of industrial mechanical systems preferred, but not necessary Expert knowledge of supplied machinery (company provides extensive training) Requires travel up to 100% of the time, inclusive of consecutive overnights, between 10-14 days

We are developing computer vision technology which performs in-situ monitoring for industrial 3D printing (additive manufacturing, AM). This technology dramatically changes the metal AM industry by providing immediate component certification and early cancellation of defective builds. Our vision is to provide the additive manufacturing industry with a trusted method to validate part quality in real time. The Phase3D headquarters is in Chicago, located 5 miles from the Chicago Loop. We work closely with federal scientists and engineers to develop machine vision technology for additive manufacturing (camera and software based). We have established research partnerships with multiple national laboratories, US departments, NASA, and research institutions. About Phase3D Culture Phase3D is currently a small team, comprised of independent thinkers, working to solve challenges in software development, data analysis, mechatronics, electrical engineering, and computer engineering. We are a cross-disciplined group and are excited to be pioneers in the rapidly evolving field of artificial intelligence and machine learning for 3D printing. This is a fast-paced, startup work environment, but with the resources and facilities of a US national Laboratory. This means a lot of variability of workflow and responsibilities, with an emphasis on creative problem solving. You will have the chance to be a part of a team making headlines in the 3D printing world. About the Role: We are looking for a candidate with a well-rounded set of skills to support Phase3D's product deployment, customer sales, and product development. This role will incorporate a mix of fast paced engineering, sales, and operations work, including process development, data analysis, and travel to 3D printing sites such as NASA, the US Air Force, DOE national labs. This role will manage strategic customers and work on projects to mature the readiness level of Phase3D's products. About the Role We are looking for a well-rounded, hands-on candidate to support the production and deployment of Phase3D's in-situ monitoring systems for additive manufacturing. This role combines production, field service, and operations work. Perfect for someone who enjoys building hardware, traveling to customer sites, and seeing the direct impact of their work in the field. The Engineering Technician will assemble, pack, ship, test, and help install Phase3D products. You will be responsible for the physical build and validation of electrical assemblies, assisting with internal product testing, managing inventory, and documenting the processes that keep production and installations efficient and repeatable. This position provides the opportunity to work side-by-side with engineers, contribute directly to the company's growth, and represent Phase3D during customer installations and training sessions across the country. Responsibilities Production and Assembly (30%) · Build, pack, ship, and test production electrical assemblies · Cut, strip, solder, crimp, and assemble wiring harnesses and components · Use standard hand and power tools to complete builds safely and efficiently · Perform internal testing of systems and subassemblies before shipment · Maintain production quality through documentation and process feedback Field Service and Installation (50% Enforced) · Travel to customer sites for system installation, setup, and training · Perform hands-on troubleshooting, calibration, and integration with customer hardware · Communicate directly with customers to ensure smooth deployment and operation · Support the engineering team by identifying field issues and recommending improvements Operations Support (20%) · Assist in inventory management, including part tracking and material readiness · Create and update work instructions, installation guides, and process documentation · Collaborate cross-functionally with engineering, manufacturing, and quality teams · Support lean and continuous improvement initiatives within operations Minimum Education / Certification Requirements · Must be U.S. Citizen · High school diploma or equivalent required; technical certificate or associate degree preferred · Engineering mindset, willing to learn new disciplines · Ability to read wiring diagrams, schematics, and technical documentation · Strong troubleshooting and logical problem-solving skills · Excellent communication and organizational abilities · Willingness and ability to travel domestically up to 50% of the time Desired Job Requirements · 2-4 years of experience in production, electrical assembly, or field service roles · Experience assembling or testing electromechanical systems · Familiarity with manufacturing environments and basic inventory control · Exposure to lean production principles or continuous improvement initiatives · Ability to work independently while coordinating with remote teams · Comfortable with variability in tasks and changing project priorities · Enthusiastic about working in a fast-paced startup environment with a small, motivated team Work Location Hybrid and flexible options are available, but the role requires presence in Chicago, IL for production work and team collaboration. Travel to customer sites across the U.S. will be required. Benefits · Competitive Salary: $60,000 - $80,000 depending on experience · PTO program · Mentorship and professional growth opportunities · Healthcare coverage premium First Six Months: Within the first six months, the candidate will be onboarded, become AM metals customer segment literate, and exercise mastery over the commercial value-add and technical specifications of the products. These goals can be accomplished via 3 main stages. Month 1 · Understand Phase3D core technologies, technology roadmap, and business strategy o Complete one calibration of the Fringe system at a development partner's laboratory o Install updated metal fixtures in at least 1 partner site o Supervise two biweekly tests, supporting developers in troubleshooting tasks · Socialize with the cross-functional team, understanding each person's area of expertise and skills spanning the hardware, software, and product installation activities o Take the initiative to schedule a 15 minute meeting with each member of the Phase3D team, including our digital fringe projection expert and our company coach · Understand how Phase3D monitoring provides value to research, additive equipment manufacturers, and contract manufacturers o Schedule a meeting with Sales to receive a full presentation as if you were a customer · Get hands on with the technology, learn how to install and calibrate the system, learn how heightmap readings predict and identify build defects o Create a report for a chosen build, identifying interesting defect areas and reporting on them. Months 2-3 · Taking initiative to fill gaps in operations that you identify o Lead all biweekly test coordination, successfully run 4 biweekly tests and write reports on the results for the slack channel · Planning trips and leading system installations at customer facilities o Lead the trip planning process for at least 1 installation · Build sensor packages and assemble systems with minimal supervision o Make 4 trigger cables and maintain stock of 4 trigger cables o Build and maintain stock of 4 Fringe kits · Provide customer feedback to the team for continuous product improvement. o Make a report on identified areas of weakness in our team/workflow, with suggested improvements. Take charge on implementation Months 3-6 · Contribute to Phase3D' growth through consistently delivering outstanding products and innovations. o Take charge of 3 strategic initiatives within the company, either from the existing list or create your own based on identified gaps in operations.

. Vanguard Durst Digital Printing Systems is the leading manufacturer of UV Flatbed, Hybrid and Roll to Roll printers for signage, decor, corporate, industrial, and packaging. Vanguard's mission is to deliver the best ownership experience in the wide format market to our customers. This is accomplished by offering the highest levels of service, outstanding communication, technology, and customer care. We create, foster, and nurture a culture of caring about our customers, vendors, and employees which shows in every interaction internally and externally. At Vanguard, you aren't just an employee - you are family. From day one, you'll be welcomed into our team of dedicated, talented, friendly people who will provide all the support you need to be successful. Your first month of training will include time at our Atlanta-area headquarters as well as in the field where you will shadow other Service Technicians. You get to form strong relationships with customers and delight them with outstanding service. You'll have the satisfaction of knowing you made a positive, lasting impact every day. Are you the go-to for fix-it assistance in your circle of family and friends? Are you a DIY person who likes working with your hands and mind, tackling challenges, and taking things apart and fixing them? If yes, we want to talk to you! Here are some examples of the skills/experience/hobbies we find typical in our Service Technicians: RC Car and Planes Robotics experience Automotive repair Motorcycle rebuild and repair Bicycle repair/modifications Small engine repair Automation machine repair Mechatronics students Machine assemblers or repair Marine mechanics Now, a bit more about what you'll be doing in this job: The Service Technician is responsible for installing and servicing all printers to the delight of our customers, while enhancing Vanguard Digital's products by recommending enhancements/improvements. Your specific responsibilities include: Ensure all printers are properly installed and operational. Train Vanguard customers on how to operate our printers. Diagnose, repair and solve issues with our printers via remote support or onsite service. Support sales activities by passing information/opportunities to Sales Provide remote support for our customer service 1-800 line. Communicate effectively with all stakeholders to direct activities that support and deliver on our commitments. Document/Record service calls including materials and resolutions in our software (Salesforce) system. What you bring to the table: The successful candidate will be an aggressive problem solver and an action oriented individual who effectively builds long-term value with our customers and fellow employees. To be considered for this position, you must have these qualifications: Heavy, industrial equipment maintenance knowledge/experience Installation/support experience onsite as field tech/engineer Willingness to travel as needed, typically up to 75% of the time throughout the USA and Canada, with occasional weekend work to meet customer needs Great attitude and eagerness to learn Excellent communication and customer service skills Strong mechanical aptitude and good dexterity Strong electrical and electronic troubleshooting skills Ability to identify, recommend, and implement effective technical repair and maintenance solutions. Proficient computer skills High school diploma or equivalent Experience or training within some form of mechanical discipline Valid driver license and willingness to do pre-employment drug and criminal background checks Physical Demands: Must be able to stand and walk most of the workday, including frequent bending/stooping. Must be able to lift/carry and push/pull up to 50 pounds. Bonus points for these nice-to-have but not required qualifications: Associates degree or equivalent training and/or experience Previous experience in printing or related industry Familiarity with reading schematics and wiring diagrams Hands-on experience with hand tools Working knowledge of multimeters for electrical testing Working knowledge of AC and DC up to 3 phase Basic knowledge of PLC programming Strong understanding of computer hardware and software

ICT (In-Circuit Test) Test Technician (1st shift) Nidec Mobility America Corporation(NMOA) has an immediate opportunity for an energetic and focused ICT Test Technician within our St. Charles, IL location. 1st shift (6a- 2:30p) with Overtime Available Saturdays (and possible some Sundays). A little about Nidec Mobility.. We are the North America headquarters for Nidec Mobility America (locations in Illinois, Michigan, Ohio, Canada, Mexico) and a leading Automotive Electronics Designer and manufacturer of sophisticated electronic sensing and control technology / components. We control the most discrete functions within an automobile, including: power system components, complex user interfaces, seat and power window switches, and instrument panel controls, electronic sensing/radar). Objective Under the general direction of the Mfg. Process Engineering Group Manager ensures that ICT failures are analyzed, root cause of the failure is identified and corrective action is implemented. Essential Responsibilities REQUIRES 5+ Years direct experience with AGILENT/KEYSIGHT 3070 in-circuit test experience to.. Perform visual inspection and electrical testing of all ICT failures. Identifies the root cause of the failure based on ICT output file and multi-meter/bridge readings. Identify soldering issues with the ICT failed boards based on knowledge of IPC-610 Nidec Mobility Quality Standards. Fixes the issues identified or instruct inspectors on how to fix the issue. Records the failure reason in the ICT test database. Setup ICT machine to run failed boards. Analyzes ICT first-pass yield and final yield using automated reports from ICT database and recommends corrective action to ICT technicians. Generate excel reports on a weekly basis about overall ICT rework work-in-process level. Maintain clean and organized work area at all times. Completes daily area clean up at the end of shift May participate in cross-training activities with other related positions Support / Participate in the Company's management and quality system including continuous improvement efforts Notify supervisors, group leaders or technicians of any problems or nonconforming product Support/Implement the Environmental policy as it pertains to work activities Perform other duties as required or assigned which are reasonably within the scope of the activities enumerated above Experience: 5+ Years direct experience with Agilent/Keysight 3070 in-circuit test experience Education: Associate's or 2 Year Degree Knowledge/Skills/Abilities: 5+ Years experience in an analysis/inspection role in electronics manufacturing Working Knowledge of troubleshooting electronic circuits Working knowledge of using Microsoft Windows and Microsoft Excel 3+ Years' experience in Solder inspection/repair Working knowledge of reading circuit diagrams NOTE: This position Is Not open to external sourcing (Recruiting agencies)

Job Posting Start Date 12-15-2025 Job Posting End Date 01-26-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add an Industrial Controls Technician located in Buffalo Grove, IL. Reporting to the Systems Engineering Manager, the Industrial Controls Technician leads troubleshooting and repair electrical, controls and communication issues on complex production lines which include PLC, HMI, motion control, VFDs, servo motors/drives, industrial networks and vision inspection systems. Shift: 6am - 6pm (rotating shift) What a typical day looks like: Support Automation Technicians in troubleshooting mechanical, pneumatic and hydraulic systems and components to return equipment to production. Set up and troubleshooting of motion control systems, Servo motors/drives and VFDs. Troubleshoot, maintain, and update in-line vision systems such as Cognex. Plan, implement PLC and HMI software upgrades and perform functional verifications. Read and interpret technical manuals, electrical schematics, various programs and mechanical diagrams including complex automated system drawings. Write test procedures to demonstrate effectiveness of software/hardware upgrades. Clearly and concisely document work performed in Medical Device environment. Other duties & responsibilities: Maintain software, documentation and equipment to the latest revision or operational specifications. Identify critical devices on new equipment and assure we have all manuals, cables, software, firmware and knowledge necessary to troubleshoot, repair or replace those devices. Collaborate with the automation team in the qualification process of automated systems. Assist engineers in developing and designing hardware and software required for automation solutions per specifications. Train other technicians and operators on processes and equipment. Proper use of power tools and measuring equipment Strong awareness of safety/electrical safety. The experience we're looking to add to our team: Requires a minimum of 6 years of experience troubleshooting PLCs', HMI's, motion control, VFDs, Servo motors/drives, industrial networks and vision inspection systems. Associates degree, Military technical training or vocational training in Industrial Controls Technology. Medical device experience or other regulated industry is preferred. Software experience with: RSLOGIX, Logics Designer, Factory Talk, Ignition, Cognex, Insight, Siemens S7. AW20 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$33.08 USD - $45.49 USD HourlyJob CategoryProduction EngineeringRelocation: Not eligible Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is looking for you to join our team as an Electronic Technician 3 based out of Rolling Meadows, IL. The selected candidate will perform a variety of technical functions in support of the design, assembly, testing, and maintenance of advanced electronic systems for mission-critical applications. This role requires hands-on work with electronic assemblies, circuit boards, and sophisticated test equipment to ensure all systems meet stringent performance and quality standards. The ideal candidate excels in a dynamic environment, demonstrates strong problem-solving skills, and is committed to delivering reliable, high-quality results. What You'll get to Do: Conduct functional and performance testing, troubleshooting, and repair of electronic systems and subassemblies. Operate specialized test stations and equipment, with a focus on RF applications and TWT (Traveling Wave Tube) tuning. Perform automated testing and MPM/TX (Microwave Power Module/Transmitter) testing. Execute test procedures, accurately record data, and ensure compliance with engineering specifications and military standards. Maintain comprehensive test documentation and calibration records, adhering to safety and ESD protocols. Support root cause analysis of test failures, including data collection and implementation of corrective actions. Assist with environmental testing and system-level verification. Ensure ongoing compliance with safety, quality, and security standards. Must be able to lift up to 30 lbs. +. Must be available to work OT and possibly weekends ******Note: Must be available to work an off-shift schedule (2nd with a 10% shift differential or 4th shift weekends with a 15% shift differential). Training will be conducted on the 1st shift for up to 6 months****** Basic Qualifications Electronic Technician 3: High school diploma and 4 years of related experience; or Electronics training is equivalent to 2 years of technical trade school or military technical school. Experience in military or aerospace manufacturing or depot environments. Proficiency with Microsoft Office applications. Ability to obtain and maintain a DOD security clearance. U.S. citizenship required. Preferred Qualifications Electronic Technician 3: Experience with RF applications, TWT tuning, automated testing, and MPM/TX testing. Knowledge of automated test systems and data acquisition software. Experience with SAP/GOLD/ Microsoft Office suites. DOD security clearance What We Can Offer You: Northrop Grumman provides a comprehensive benefits package and a work environment that encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off, and Additional Benefits, including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Primary Level Salary Range: $63,500.00 - $105,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Profile: The Maintenance and Repair Technician will be responsible for maintaining, troubleshooting, and repairing CCTV systems, special electromechanical equipment, tools, and robotic systems. The ideal candidate will possess strong technical skills, an ability to diagnose and solve complex problems, and a commitment to ensuring the reliable operation of critical equipment. Responsibilities: Learn and understand the processes and technology used by Fer-Pal. Assemble, maintain, and repair CCTV cameras and related hardware. Perform routine inspections and preventative maintenance on CCTV cameras, tools, and equipment. Diagnose and troubleshoot video feed, storage, cables, wiring systems, and system integration issues. Perform scheduled maintenance and emergency repairs on various electro-mechanical systems. Calibrate and adjust profilers and other robotic tools and equipment to ensure optimal performance. Diagnose and resolve mechanical, electrical, and control system issues. Maintain detailed records of maintenance and repairs. Ensure all tools and equipment are in good working condition. Perform regular inspections and maintenance on hand tools, power tools, and specialized equipment. Manage inventory and request replacements or repairs as needed. Maintain and repair robotic systems used by CCTV, cleaning, lining, and field teams. Diagnose faults and perform troubleshooting on robotic control systems and mechanical components. Conduct preventative maintenance to minimize downtime and extend the lifespan of robotic systems. Work with engineering teams to implement upgrades and modifications to robotic systems. Work with engineering and manufacturing teams to assemble new equipment and prototypes. Provide equipment-related feedback and information for CCTV operator training. Support service calls by addressing potential issues and problems coming from CCTV operators and field staff. Provide feedback and support information to the internal development team and engineers involved in the design of electronic/electrical components of a system. Continuously work on improving knowledge related to vision inspection methods and technologies, robotic and remotely controlled devices, and navigation systems. Participate as required in prototype manufacturing activities (produce components, assemble prototypes and circuit boards, perform system validation, fine-tune mechanisms, and assist with installation at Fer-Pal sites). Execute other activities and tasks assigned by the company as needed. Always maintain a professional demeanor. Maintain safety and housekeeping at all times. Job requirements Strong problem-solving skills A creative approach for generating new ideas High school diploma or equivalent; technical school or associate degree in a related field preferred Minimum of 3 years of experience in maintenance and repair of CCTV, electro-mechanical equipment, and/or robotic systems Proficiency in reading and interpreting technical manuals, schematics, and blueprints Strong understanding of electrical and mechanical systems Experience with diagnostic tools and software for troubleshooting equipment issues Knowledge of PLCs, motor controls, and robotic programming is a plus Good communication and interpersonal skills Ability to work independently and as part of a team Flexibility to work on-call or irregular hours as needed Ability to lift and carry up to 50 pounds Valid driver's license and reliable transportation Ability to pass background checks and drug screenings as required Work may be performed in various settings, including project sites, offices, manufacturing shops, and outdoors Exposure to noise, dust, and other potentially hazardous conditions is possible Safety gear may be required, such as gloves, helmets, and protective eyewear An appreciation of business demands Ability to thrive under pressure Combination of relevant experience and relevant education All done! Your application has been successfully submitted! Other jobs

About Folding Guard: Folding Guard is a leading manufacturer and provider of innovative security and safety solutions for a wide range of industries. With a history spanning over 50 years, we are committed to delivering high-quality products that protect people, property, and assets. Our dedication to excellence and our customer-centric approach have made us an industry leader in security enclosures, wire mesh partitions, and other customizable security solutions. Position Overview: We are looking for a highly motivated and experienced Robot Technician with proficiency in Panasonic programming to maintain, troubleshoot, and optimize robotic systems within our manufacturing facility. The successful candidate will play a crucial role in ensuring the smooth operation of our automated processes, ultimately contributing to the overall productivity and quality of our products. Key Responsibilities: Program, set up, and operate Panasonic robotic systems to perform various tasks in the production process. Conduct regular inspections and preventive maintenance on robotic equipment to ensure optimal performance and minimize downtime. Troubleshoot and diagnose technical issues related to robotic systems, identifying root causes and implementing effective solutions. Collaborate with cross-functional teams to integrate new robotic technologies and automation solutions into existing processes. Train and mentor production staff on the proper operation and maintenance of robotic equipment. Document all maintenance activities, including repairs, adjustments, and programming changes, to maintain accurate records. Stay up-to-date with the latest advancements in robotics technology and recommend improvements to enhance operational efficiency. Qualifications: Bachelor's degree in Robotics, Automation, Mechatronics, or a related field. At least three years of experience in programming and maintaining Panasonic robotic systems in an industrial setting. Strong understanding of PLCs, HMI interfaces, and other control systems relevant to robotic automation. Proficient in reading and interpreting technical drawings, schematics, and manuals. Excellent problem-solving skills and the ability to work efficiently under pressure. Strong communication and interpersonal skills to effectively collaborate with team members at all levels. Attention to detail and a commitment to maintaining high-quality standards. Benefits: Competitive salary Opportunities for professional growth and advancement Positive and collaborative work environment Employee recognition and development programs Comprehensive benefits package including: Medical: Access to our medical insurance plan, which provides coverage for medical expenses and prescriptions. Dental: Enrollment in our dental insurance plan, helping you maintain your oral health. Vision: Participation in our vision insurance plan for regular eye exams and eyewear. 401(k) Retirement Plan: Eligibility to enroll in our 401(k) plan, with a company match of the first 6% of your contributions at a 40% match. This is an excellent opportunity for you to save for your retirement with added support from the company. Vacation: will accrue 10 vacation days Additional Information: We are looking for candidates for both first and second shifts. Folding Guard is an equal opportunity employer. We are committed to providing a workplace that is free from discrimination and harassment based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable law. Employment decisions are based on qualifications, merit, and business needs. Visa Sponsorship Disclaimer: Folding Guard regrets that, at this time, we are unable to sponsor work visas or provide immigration assistance for employment. All candidates must be legally authorized to work in the United States of America without requiring sponsorship. We appreciate your understanding in this matter. Third-party recruiters are kindly requested not to reach out to members of our staff regarding this position.

Purpose of the Job: The Electrician is responsible for modifying, repairing, and overhauling all types of electrical and electronic equipment and controls across the facility. Maintain, modify and install PLC programs. Troubleshoot and correct electrical/electronic problems on the plant floor. Key Accountabilities: Install, modify, rebuild, repair or overall all types of electronic/electrical equipment and controls with an emphasis on plant operations. Remove and/or install electronic/electrical equipment and parts. Analyze and correct electrical/electronic problems. Must be familiar with electrical/electronic tools, gauges, calibration and testing equipment. Must have a working knowledge of computers, hand and power tools, pipe threader, etc. Must be familiar with motors, transformers, conduits, bus ducts, fittings, wires, cable, transistors and other electrical/electronic gauges, meters and control devices. Must be able to modify, maintain, and install PLC programs. Identify PLC problems, troubleshoot PLCs and maintain PLC updated documentation and wiring changes. Receive wiring diagrams, drawings, specifications and instructions covering scheduled and emergency repair, installation and inspection work to be done. Plan and perform work requiring a thorough knowledge of electrical and electronic theory and principles, wiring specifications, codes, properties of various materials, and principles of operation and application of electronic equipment. Make sketches of parts and layouts, design and construct adaptations or conversions of component parts, including the necessary phases of development work. Perform Preventative Maintenance inspection of assigned equipment, report findings and take appropriate action. Write and perform maintenance work orders as required. Make mechanical and electrical repairs as required in servicing electronic equipment, including assembling, modifying, repairing and replacement of individual electronic parts within components, circuit modules, and printed circuit boards. Maintain performance inventory and maintenance records for electrical and electronic equipment. Advise operators, mechanics, and other electrical maintenance personnel of standard operating procedures and requirements for electronic and electrical equipment and controls. Notify supervisor of potentially dangerous electrical equipment notes and corrective action taken. Operate equipment and assist production as directed. Other duties as assigned. Knowledge/Skills/Experience: Journeyman electrician designation with at least three years industrial experience Experience with installation, troubleshooting, repair and adjustment of industrial, electrical and electronic equipment. Experience with Allen-Bradley and/or Modicon PLCs, Controllogix5000 is a plus Software experience with frequency drives, Yaskawa and others preferred Working knowledge of 3 phase power circuits and ability read electrical prints Ability to pass the Mechanical Comprehension test at 50% or higher. Strong working knowledge in safety principles High school diploma or equivalent required We are a 24/7 continuous operation running 4 days on, 4 days off with 12-hour days in a union environment. Employees must be flexible to work days and nights as well as holidays. Rate of pay is $44.61/hr. In addition we pay Time and One Half for all hours worked past 8 hours each day! A 5% Night premium included for all Night shift positions. Ardagh Metal Packaging is a leading global supplier of sustainable, infinitely recyclable metal beverage cans to brand owners. A subsidiary of sustainable packaging business Ardagh Group and a leading industry metal packaging company, Ardagh Metal Packaging employs more than 6,300 people across Europe, North America and Brazil, with sales of approximately $4.7 billion. Ardagh Metal Packaging believes that the success of our business depends on the success of our people. We strive to create working environments where our employees feel valued and can work to their full potential. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey! Ardagh Metal Packaging - North America has been and will continue to be an equal opportunity employer. All employment decisions are made without regard to sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race, creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent, or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status or any other basis prohibited by federal, state, or local law. Discrimination against any employee or applicant based on any of these factors is prohibited. The starting hourly base rate for this role is $44.61. The company also offer a Success Share Bonus that is dependent upon meeting metrics and targets. Please note that the range for the rate provided is a good faith estimate and is only applicable for roles that are based out of Illinois. The final rate will be determined after considering relevant factors, including, but not limited to, a candidate's qualifications, experience, and work location, where appropriate. Ardagh Metal Packaging also offer a comprehensive benefits program including medical, prescription, dental and vision coverage with an opportunity to earn a medical/prescription premium reduction by completing a qualified wellness activity. The Company also offers a 401(k) Plan. Ardagh Metal Packaging benefits may be amended at any time.

Robot Technician WeatherTech Direct is seeking well-qualified Robot Technicians to perform configurations on the robotic systems and troubleshoot errors on the thermoforming machines in the Production department. This is a great opportunity to join our 3rd shift team! High performing, reliable, and teamwork-minded employees are rewarded with a competitive compensation and benefits package including the potential to earn end of year bonuses and pay increases. Starting rate: $24.00/hr. with a 2nd shift premium of $1/hr. and 3rd shift premium of $1.50/hr. As a Robot Technician you will Configure robot systems and perform job calibrations for production operation Monitor robot systems during production and address or report any operational issues Assist in repairs to the robotic systems. Understand the requirements of a properly installed and prepared tool and the impact of errors or improper setup on the robotic process Perform machine cycle and make any necessary robot program modifications Assess and troubleshoot operational errors Read and understand product briefs and process sheets to ensure accuracy in machine set up Operate HMI/MIU to optimize platen heights, install program for robots/robotics lines, and input process numbers for mold changes Understand and efficiently operate robotic pendants, controllers, and panels. Use a tape measure to confirm mold sizes Ensure all equipment is in proper position before removing molds from machine Clean and inspect molds between each use; report any damage to Set Up Lead and Quality Department, send out any damaged molds for repair Install, repair, or replace end of arm tooling for robotic machines Perform assigned preventative maintenance and housekeeping tasks to prevent productivity losses and possible equipment damage Train new and existing team members on different functions of the work area to ensure all are able to perform all tasks properly; share knowledge and best practices to help aid efficiency and productivity Cross train in other areas with similar equipment, and in areas that immediately precede and follow the operations you are responsible for Perform all job functions in compliance with safety guidelines and company policies/procedures Maintain your training and full understanding of the quality requirements of the products your equipment / process produces Keep work area in a clean and orderly condition, clean and maintain equipment Communicate clearly and work as part of a team Work weekends and overtime, as required Set the next shift up for success Perform other duties as assigned Qualifications Previous machine set up experience (preferred) Hold a working knowledge of Plastics and Thermoforming (preferred) Familiarity with mechanical, electrical, hydraulic and pneumatic processes in a manufacturing environment Knowledge of OSHA regulations as they pertain to manufacturing Ability to read, write, and understand verbal and written work orders/instructions in English Possess basic math, measuring, and computer skills (required) A high degree of attention to safety to prevent accidents, injuries, and quality issues Possess experience using basic hand and power tools Be dependable with excellent attendance Be able to work without close supervision in a team environment Authorization work in the United States A high school diploma or equivalent (required) Ability to operate a variety of measuring devices, machines, hand and power tools, manual lifting devices, and powered industrial vehicles Why you'll love working at WeatherTech WeatherTech Direct is proud to offer employees a competitive salary and benefits package, opportunities for internal promotions and skill development, and a clean and safe workspace. Employees are offered an array of perks including: Outstanding BlueCross BlueShield of Illinois medical plans; as well as dental, vision, short and long-term disability, and company-paid life insurance 401(k) plan Paid vacation, holidays, and personal time

Voltguard Utilities Limited is seeking a highly skilled and motivated Electronic Technician to join our team. This remote, field-based position involves providing technical support, troubleshooting, and repair services across a range of client locations, vendor sites, and other facilities. The role requires an independent, detail-oriented technician with strong communication skills who can deliver high-quality service in diverse environments. Key Responsibilities: 1. Remote Technical Support and Field Service: - Provide on-site technical assistance, including installation, maintenance, and repair of electronic systems and equipment. - Travel frequently to client addresses, vendor facilities, and other off-site locations to address service requests and resolve technical issues. 2. Equipment Troubleshooting and Repairs: - Diagnose and repair faults in electronic systems, including circuit boards, controllers, and integrated systems. - Perform system tests, calibrations, and inspections to ensure optimal functionality and compliance with safety standards. - Replace or repair defective components, ensuring that all repairs meet manufacturer specifications and industry best practices. 3. Installation and Commissioning: - Install new electronic systems and equipment at client sites, ensuring correct setup and integration with existing infrastructure. - Conduct system commissioning, including testing and verification to confirm that installations meet operational requirements. 4. Preventive Maintenance and Upgrades: - Perform regular preventive maintenance on client systems to ensure continued reliability and minimize unplanned downtime. - Recommend and implement system upgrades or modifications to enhance performance and extend equipment lifespan. 5. Client and Vendor Liaison: - Serve as a key point of contact between Voltguard and its clients, providing professional and courteous customer service during all interactions. - Coordinate with vendors and suppliers to facilitate the timely delivery of replacement parts, equipment, and other resources required for repairs. 6. Technical Training and Knowledge Transfer: - Provide clients with detailed instructions and training on operating and maintaining their electronic systems. - Share insights and best practices to enhance client understanding and promote optimal system use. 7. Documentation and Reporting: - Maintain accurate records of all service activities, including repairs, installations, and maintenance visits. - Prepare detailed service reports, including diagnostics, performed work, and recommendations for future actions. 8. Compliance and Safety: - Ensure all work is performed in compliance with industry standards, safety regulations, and Voltguards internal guidelines. - Stay current with industry advancements and best practices, integrating them into day-to-day operations. Required Qualifications: - Proven experience as an Electronic Technician, with expertise in troubleshooting, repairing, and maintaining electronic systems. - Strong knowledge of electronic components, circuitry, and system integration. - Ability to work independently in remote locations with minimal supervision while managing service schedules and priorities. - Excellent problem-solving skills and the ability to analyze and resolve complex technical issues. - Strong communication skills, both verbal and written, to interact effectively with clients, vendors, and internal teams. Preferred Qualifications: - Associate or Bachelors degree in Electronics, Electrical Engineering, or a related field. - Experience with field-based or remote technical service positions. - Familiarity with industry safety standards and protocols. Additional Information: - The position requires frequent travel to various locations, including client sites, vendor addresses, and other remote locations. - Flexibility in scheduling, including occasional weekend or after-hours work, may be necessary to meet client needs. - Voltguard Utilities Limited offers ongoing training, professional development, and opportunities for career growth. Benefits: Voltguard Utilities Limited offers a competitive compensation package, which includes vacation days, sick days, paid holidays, a paid floating holiday of your choice, paid maternity & paternity leave, along with Medical, Dental, Vision, 401K, Optional Life insurance, and opportunities for professional development. We are dedicated to creating an inclusive and collaborative workplace where every team member can thrive. Compensation Information: $23 - 40 per hour + bonus eligible + benefits. Opportunities exist in multiple locations:

Job Description Electronic Technician II - 2nd Shift Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for an Electronic Technician II based out of Harvey, Illinois. Reporting to the Electronic Technician Manager, you will be responsible for maintaining and troubleshooting problems with the electrical equipment, wiring and resources in the tube manufacturing operation. The ideal candidate will have at least a bachelor's degree or expert certification in an electrical field with 5+ years of electronic troubleshooting experience in an industrial environment. Experience in lean manufacturing or business system-based company is a plus. What you'll do: Implement solutions to decrease production downtime, through equipment enhancement projects and preventive maintenance procedures. Train and mentor electronic technicians with an emphasis on teamwork, continuous improvement and accomplishment of safety, quality, delivery, and cost goals. Maintaining and troubleshoot problems with the electrical equipment, wiring and resources in the tube manufacturing operation. Work with maintenance and production personnel in analyzing and troubleshooting equipment failures. Assist with equipment installation. Provide procedural improvements. All other duties assigned by your supervisor. Participate in Lean Manufacturing activities and promotes the plant Lean culture. What you'll bring: 5+ years of electronic troubleshooting experience in an industrial, automotive or manufacturing environment required. Tube mill or steel industry experience strongly preferred. Ability to troubleshoot and repair down to component level required. Knowledge in 3-phase power systems, AC/DC drives, PLC/HMI programming. Knowledge in induction heating and welding equipment, flying cut-offs, Servo Drive Systems, automated packaging systems and/or robotics encouraged to apply. Knowledge of A/B and Siemens PLC's are welcomed to apply. All associates must embrace and foster an environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability. Within 3 months, you'll: Complete your Atkore Immersion Program Understand how your job will help deliver Atkore's Business System through Lean Daily Management and the Strategy Deployment Process. Gain an understanding of your team and areas you support. Within 6 months, you'll: Gain an understanding of the current training materials and procedures your team owns. Be able to resolve any issues quickly and safely. Partner with Operations Manager and Engineering to start identifying short- and long-term process improvement ideas. Identify ways to strengthen the team's commitment to Atkore's core values of Accountability, Teamwork, Integrity, Respect and Excellence. Within 12 months, you'll: Create, update, and share training materials and documentation. Have meaningful performance conversations with team and operators in areas supported. Atkore is a five-time Great Place to Work© certified company and a four-time Top Workplaces USA award winner! We're committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $74,800- $102,850. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: Medical, vision, and dental insurance Life insurance Short-term and long-term disability insurance 401k Paid Time Off Paid holidays Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis. #LI-KB1

Role: Slalom Flex (Project Based) - Technical Engineer (Pega) Who You'll Work With Our teams help organizations of all kinds redefine what's possible, give shape to the future - and get there. We focus on high-impact projects, meeting our clients where they are to uncover business needs and deliver results. Our teams go beyond the expected to help clients move confidently through ambiguity and risk and drive more transformative outcomes. The Technical Engineer with strong Pega expertise will focus on designing, building, and optimizing enterprise workflows on the Pega Platform, ensuring high performance, security, and scalability. What You'll Do * Design and Build: Develop case types, flows, UI rules, and data models on Pega Platform (v7.x / v8.x). * Integrations: Implement and troubleshoot integrations (REST, SOAP, APIs, MQ, databases). * Performance & Security: Conduct performance tuning and enforce security/access control best practices. * Collaboration: Work within Agile/Scrum teams, partnering with business analysts, QA, and DevOps. * Consulting Excellence: Translate business requirements into technical solutions and provide clear recommendations to stakeholders. What You'll Bring * Strong expertise in Pega Platform (v7.x / v8.x). * Proven experience as a Technical or Lead Pega Architect on large-scale implementations. * Deep understanding of: * Case Management, Flows, and UI rules * Data modeling and decisioning * Pega performance tuning and optimization * Security and access control * Hands-on experience with integrations (REST, SOAP, APIs, MQ, databases). * Experience with Agile/Scrum methodologies. * Experience with Pega migrations and upgrades. * Pega certifications such as: * Pega Certified Lead System Architect (CLSA) * Pega Certified Senior System Architect (CSSA) * Familiarity with cloud platforms (AWS, Azure, or GCP). * Exposure to DevOps tools and CI/CD pipelines. * Experience in regulated industries (Financial Services, Healthcare, Insurance). * Consulting experience. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the hourly pay range is $65 to $90/HR depending on experience. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The hourly pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal-opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications on an ongoing basis through January 23, 2026

As an Electromechanical Technician, you will report to the Plant Engineer or Maintenance Supervisor and perform maintenance tasks to ensure the high-quality, efficient, and timely shipment of products. Safety, quality, productivity, and a strong work ethic are integral to our culture. **Responsibilities** + Understand and follow plant safety rules, including Lockout/Tagout (LOTO) and safe machine operation. + Read and interpret electrical blueprints, wiring diagrams, schematics, specifications, and technical data. + Work on motors, contractors, and relays using a multimeter to verify component functionality. + Operate advanced shop equipment such as bandsaws, mills, and lathes. + Maintain and repair Chillers, Process pumps, compressors, ink pumps, and glue pumps. + Analyze and resolve all mechanical and electrical issues related to the equipment. + Demonstrate solid knowledge of electrical controls/PLCs, including troubleshooting and repairing electrical systems. + Perform preventative, predictive maintenance, routine repairs, and calibration on manufacturing process equipment with minimal downtime. + Diagnose the root cause of problems with production equipment to determine the best solution: electrical or mechanical. + Document parts used and repairs completed in the CMMS and assist in maintaining an organized parts room. + Participate in Performance System activities such as 5Star, Pillar Teams, Audits, and Near Misses. + Ensure regular, consistent attendance and punctuality. + Use Personal Protective Equipment where required. + Ensure proper and safe operational conditions of all production and related equipment. **Essential Skills** + Troubleshooting skills in mechanical and electrical areas. + Experience as a Maintenance Technician or Electro-mechanical role. + Ability to read and interpret blueprints. + Knowledge of hydraulics and pneumatics. **Additional Skills & Qualifications** + Experience in an industrial environment or military background in troubleshooting, repairing, and maintaining manufacturing equipment. + Preferred industry experience with blown films, sheet extruders, printing, lamination, and slitting. + Experience with PLC troubleshooting, industrial and motor controls is a plus. + Ability to operate a forklift. + Comfortable with mechanical lifts, ladders, kneeling, bending, twisting, and lifting up to 50 lbs. + Ability to work independently and manage multiple tasks in an off-shift position with rotating shifts that require overtime, including weekends. **Why Work Here?** We offer a comprehensive total rewards package, including competitive pay and benefits. Our benefits include medical, dental, and vision coverage,. **Work Environment** Work in a 500,000 sq. ft. facility where safety is a top priority. The facility is extremely clean and well-organized, adhering to GMP standards. Required safety gear includes safety shoes, hair nets, ear plugs, and safety glasses. Departments include Print, Lamination, Slitting, Warehouse, and Maintenance. The workforce is strong and tenured, with recent investments in new machinery and additional capital expenditures planned. Updated breakrooms feature a new self-serve vending process. **Job Type & Location** This is a Contract to Hire position based out of Elk Grove Village, IL. **Pay and Benefits** The pay range for this position is $35.20 - $42.88/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Elk Grove Village,IL. **Application Deadline** This position is anticipated to close on Jan 23, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionDescription: Robot Technician 1 Robot Technician 1 Page 1 of 3 January 2026 TITLE: Robot Technician 1 BUSINESS UNIT: REPORTS TO: Service Manager FLSA STATUS: Non Exempt LOCATION: Schaumburg, IL REVISION DATE: 1/1/26 SUMMARY CLOOS North America is looking for a motivated and experienced Robot Technician to help us with our growing installation, programming and field service capacity. The ideal candidate should have experience in programming, repairing and installing robotic systems. He or she will be involved in all phases of the process from system assembly and integration, installation, programming and servicing of the equipment. The Robot Technician will work closely with the project and engineering teams to ensure that all systems are built, delivered and installed to the needed specifications. ESSENTIAL FUNCTIONS Reasonable Accommodation Statement To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions: • Ability to read basic weld drawings simple 2D layouts and electrical schematics, • Program a welding industrial robot from scratch or using offline program. • Program a welding Collaborative Robot (CoBot) from scratch • Use a robot to perform single pass GMAW welds. (Tandem GMAW a plus) • Support Welding Demonstrations at CLOOS Facility as needed • Able to use and modify offline program • Assemble various mechanical assemblies using various tools such as impact wrenches and torque wrenches. • Install/replace prefabricated wiring harnesses, using various tools. • Connect wiring to terminals and connectors using specialized and basic hand tools and power tools. • Troubleshoot basic system errors. • Trouble shoot Welding Process issues • Maintain a clean and safe work area. • Follow all company policies and procedures. Requirements:

Under the direction of the Supervisor, Technical Services or designee, the Electronics Technician is responsible for the troubleshooting, repair, and maintenance of all electronic, logic, and digital equipment and electromechanical devices, including farebox revenue collection system equipment, destination signs, radio, video, and Intelligent Bus System (IBS) equipment for Pace divisions and contract carriers as applicable. Performs other duties as assigned. Essential functions include: Troubleshoots and repairs all farebox revenue collection system equipment. Troubleshoots and repairs all destination sign, radio, video, Intelligent Bus System (IBS) and other related equipment. Modifies and/or fabricates parts to keep equipment in good working order. Uses/maintains computer software/hardware equipment. Tracks equipment and issues through computer data entry. Maintains all records and forms in compliance with applicable regulations and in Pace requirements. Performing other duties as assigned or required. Qualifications Age: 21+ Education: Qualified candidate must have a high school diploma or equivalent. Certification/ License Requirements: Must have a valid driver's license with good driving history. Experience: Must have a minimum of five years of experience working in the field of electromechanics including logic systems, digital circuitry, and electro-mechanical devices and have a strong work history demonstrating the ability to excel in similar roles. Proficiencies: Must have knowledge in the areas of electro-mechanical devices, communications equipment, and complex electronic circuitry. Must be able to understand and operate electrical test equipment to support maintenance and repairs and to operate maintenance vehicles. Must be proficient in Microsoft Office applications (Outlook, Word, Excel, etc.) is preferred. Physical Requirements: Must be able to stand for extended periods of time; Lift up to 100 lbs. Working Conditions: Must be available to work 24 hours a day, 7 days a week, 365 days a year. Work is performed at garages and other facilities, including sites under construction which may be subject to extreme temperature and weather conditions as well as moderate to loud noise levels. Position requires the wearing of protective clothing and shoes and the use of appropriate safety and personal protective equipment. This position is not eligible for hybrid schedule or telecommuting. Salary: Full Salary Range: $54,732 - 107,952 Salary Midpoint: $81,342 Anticipated Starting Salary: $68,037 - 81,342 BENEFITS SUMMARY

National Material Processing (NMP) was formed in 1964 and is considered a leader in metals processing and supply-chain management solutions. NMP supports prominent industrial and consumer product manufacturers across a wide variety of industries.Our steel processing facilities are growing fast, and we are excited to be adding to our production teams!NMP offers the following:• Competitive wages including shift differential• Comprehensive medical and dental benefits• Annual wage increases• Production bonus opportunities Summary Performs standard noncomplex construction, assembly, testing and debugging of electronic equipment. Job Duties Lays out, fabricates, and assembles electronic components following predetermined methods and criteria. Adjusts, repairs, and modifies system, working from blueprints, sketches, drawings, and diagrams. Repairs and/or replaces malfunctioning units as directed. Sets up and operates standard electronic testing equipment. Uses hand power tools and hand tools and simple machine power tools to fabricate electronic components. Performs related job duties as required. Requirements and skills Proven experience as an Electronic Technician or in a similar role Hands-on experience with equipment and machinery Strong communication and computational skills

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location: