Electronics technician jobs in Stoneham, MA - 790 jobs

System Technician II, maintains, constructs and tests electrical components using schematics and drawings. Ensures systems and components meet required specifications, can work independently, and reports to their supervisor. Responsibilities Perform electrical and mechanical assemblies using schematics and mechanical drawings Inspect parts and assemblies for defects Work well collaboratively and independently Maintaining a safe and clean work environment Able to multitask between projects and complete projects on time Attention to detail Experience with Microsoft office, Word, Excel, PowerPoint, Outlook, Teams Keep the production area neat and tidy Qualifications Associates degree or Electrical Certification course preferred 4 to 6 years electrical and mechanical experience/knowledge Can work in a fast-paced environment Excellent communication skills, oral and written Basic Computer - Microsoft Word, Excel, Outlook. Maintain inventory of job materials Must have the ability, mobility to work in tight locations and can lift up to 40 lbs. Passport and valid driver's license required Understanding procedures, documentation and verbal instructions Knowledge of Jira and PLM/ERP systems is a plus

Akkodis is seeking a Electronic Technician for a 12+ Contract position with a client located in Norwood, MA Pay Range: $20/hr - $26/hr (The rate may vary based on experience, education, geographic location, and other factors.) Position Responsibilities Assemble electronic components, subassemblies, and systems. Test and calibrate electronic assemblies using test equipment and standardized procedures. Perform final inspection and prepare electronic products prior to shipment to customers worldwide. Test, debug, and repair products returned products to meet customer needs. Ensure that work area and equipment are maintained in a clean, safe, and orderly condition and established company policies and procedures are adhered to. Keep workstation, tools, and equipment in a neat and orderly manner. Understand and comply with all company safety rules and regulations. Minimum Qualifications: Associates Degree in Electrical Engineering, bachelor's degree in engineering technology, or equivalent military training / experience. 2+ years' electronic/manufacturing technician experience. 2+ years' experience with hand assembly / soldering and component replacement on surface mount and through-hole PCBs. 2+ years' experience troubleshooting and repairing electronic assemblies. Experience in diagnosing and repairing faults in analog and digital PCBAs using multimeters, oscilloscopes, logic analyzers, and other diagnostic tools. Experience reading and interpreting schematics, wiring diagrams, and technical manuals. Experience with surface-mount and through-hole soldering and desoldering. Experience using software-based diagnostic tools and firmware flashing utilities. Ability to read and interpret electronic schematics. Ability to use standard bench test equipment (DMM, Scope, etc.). Familiarity with IPC standards (e.g., IPC-A-610, IPC-1711/7721) for PCB inspection rework. Demonstrated ability to isolate component-level failures and perform corrective actions. If you are interested in this Electronic Technician job, then please click APPLY NOW. For other opportunities available at Akkodis go to **************** If you have questions about the position, please contact Sunny Kumar at *****************************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Rock Hill, SC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled I&C Techician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Responsible for the maintenance, inspection, troubleshooting, repair, calibration and testing of power plant instrumentation and control equipment. Must be able to read and understand drawings/prints, manuals, and procedures. Basic duties include troubleshoot instrumentation and control system (such as instrument loops, electronic control systems and equipment) to determine operational problems, follow any applicable administrative procedures, perform tests of loops, evaluate data, and recommend actions to take. Calibrate equipments/devices/components to meet technical and manufacturing specifications. Repair I&C systems and equipment according to appropriate control procedures to return equipment to service. Document all system and equipment repairs. Perform preventative maintenance on I&C systems and equipment. Perform independent and component verification, which includes review of work requests, flow diagrams and procedures. Qualification, education, and experience requirements: 5 years working experience in instrumentation and control and electrical maintenance. High school diploma or equivalent or Associate degree or higher in electronics, engineering technology, instrumentation, or related field. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electronics Technician KiddeFenwal, LLC KiddeFenwal is the global market leader in designing and manufacturing innovative industrial and commercial fire suppression systems and safety controls. Our proprietary, fully certified offerings save lives, protect property, and minimize business interruption. Our brands-Kidde Fire Systems and Kidde Fire Protection-deliver highly engineered fire suppression, detection, and control systems across industrial, commercial, and marine sectors. Fenwal Controls supports OEMs with gas ignition, temperature control, and overheat detection products. Headquartered in Ashland, Massachusetts, KiddeFenwal operates globally, with facilities in the U.S., United Kingdom (KFI-UK), and India (KTI-India). Learn more at ******************* Our Purpose We protect lives, livelihoods, and iconic assets through innovative solutions, strong partnerships, and exceptional customer experiences. Built on a foundation of integrity and safety, we drive results with speed and excellence while fostering innovation and teamwork. Position Summary The key responsibilities include Work under limited supervision to provide technical support and task ownership to electrical engineers on a variety of engineering tasks. Execution of functional and environmental testing of electronic boards/control panel and associated equipment. Perform fault isolation testing on systems and equipment and assist engineers in determining methods or actions to remedy malfunctions. Perform soldering, wiring, fixture setup as required. Work with regulatory engineers for lab qualification program for regulatory agency testing Documentation of results and tracking of units under test (UUTs) using internally developed practices and procedures. Maintain inventory of piece parts that support the delivery of rapid prototypes. Collaborate with colleagues to maintain and manage inventory of key electronic equipment and assemblies. Participate in team meetings, providing accurate status, raising issues and risks. Actively participate in, and maintain strict compliance to, all company Policies and Procedures. All other duties as assigned This position reports to the Sr. Engineering Manager and involves collaboration with engineering teams. Experience and Competencies Experience with execution of functional and environmental testing of electronic devices. Hands-on experience with component-level troubleshooting of analog and digital circuits. Proficient in use and operation of electronic lab tools/equipment such as oscilloscopes, power meters, frequency counters, multimeters, temperature/environmental chambers, and spectrum analyzers. Experience documenting test procedures and communicating results to internal customers and regulatory agencies for product certification Able to read and interpret engineering drawings, electrical schematics, test data, test procedures and specifications Able to maintain and update equipment calibration records, test setup details, test records for agency review Able to quickly adjust to shifting priorities, perform and deliver in a fast-paced environment Self-motivated team-oriented individual who has the ability to work efficiently and safely in a laboratory environment with clear direction and minimal supervision Basic Qualifications Min. AA/AS degree (or other 2-year post high school training) Min. 3 years of relevant experience Preferred Qualifications/Competencies Experience documenting test procedures and communicating results to internal customers. Experience in understanding/developing programming / test fixtures Solid written and verbal communication skills Proficient in use of Microsoft Word, Outlook, and Excel software. Experience with test facility and equipment maintenance and management. Experience with use of Data Acquisition Equipment, i.e. National Instruments Lab View. Familiarity with C programming language and PIC family of microprocessors. Experience working with non-US based teams and suppliers. Sensitivity to cultural biases and understanding the communication practices needed to create successful partnerships in and open and supportive environment. KiddeFenwal, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other federally protected class.

We have an exciting opportunity to join us in supporting one of our valued customers as an Electronic Warfare SME supporting United States Special Operations Command (USSOCOM) and Special Operations Forces (SOF). Various Locations: Fort Belvoir, VA; Fort Bragg, NC; Lexington, KY; Fort Eustis, VA; Natick, MA * This position is contingent upon a contract award* Essential Duties: * Assist the SGM and Deputy for TT as the EW SME working in collaboration with government partners, academic laboratories, and private industry - to develop new tools and technology in support of the SOF Electronic Warfare community. * Assist in the preparation and development of new requirements documentation to include Initial Capabilities Documents (ICD), Capabilities Development Documents (CDD), SPECAT messages, Basis of Issue Plans (BOIP), Test Plans, and update Project Folders. * Tasks include the identification and development of Radio Detection and Ranging (RADAR) and Electronic Counter Measures (ECM), Intelligence, Surveillance, and Reconnaissance (ISR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) for further development or fielding in support of SOF. Required Qualifications: * Qualifications include a background in EW, RADAR, ECM, ISR, EW, and SIGINT operations (particularly SOF) with a knowledge of EW techniques, tactics, & procedures. * 12+ years of relevant experience * Excellent communication, technical writing, and presentation skills. * Familiarity with DoD acquisition lifecycle and rapid prototyping processes. * Prior experience supporting USSOCOM, SOF AT&L, or other SOF components. (preferred). Education: Bachelor's or Master's degree in a related field Required Clearance: TS/SCI Travel: TBD Why Join USfalcon? * Mission-Focused Culture - Join a company deeply embedded in supporting defense, aerospace, and federal initiatives. * Career Growth & Development - Access training, mentorship, and advancement opportunities within a growing mid-tier defense contractor. * Trusted Industry Partner - Be part of a company with nearly 30 years of continuous service to DoD and federal clients.

Job Title: Electronics TechnicianJob Description We are seeking an Electronics Technician who possesses robust hands-on troubleshooting skills and experience with oscilloscopes and multimeters. The ideal candidate will have basic programming skills and a strong desire to learn while working under the guidance of a lead engineer. Excellent documentation and communication skills are crucial for success in this role. Responsibilities * Perform hands-on troubleshooting of electronic systems and components to identify and resolve issues efficiently. * Utilize oscilloscopes, multimeters, and other diagnostic tools to test and analyze electronic circuits and systems. * Use a custom panel programmer (after training) to perform basic programming tasks and ensure system functionality. * Maintain detailed and accurate records of troubleshooting processes, repairs, and programming changes. * Collaborate effectively with team members and communicate technical information clearly. * Demonstrate a willingness to learn new skills and technologies and apply them to improve system performance. * Work under the direction of a lead engineer to support project goals and deliver high-quality results. Essential Skills * Proficiency in using oscilloscopes and multimeters. * Basic programming skills with the ability to learn and use custom panel programming tools. * Strong hands-on troubleshooting abilities. * Soldering (Surface Mount-SMT). * Excellent documentation and record-keeping skills. * Good communication and teamwork abilities. * Eagerness to learn and adapt to new challenges. Additional Skills & Qualifications * Associate's degree in Electronics, Electrical Engineering, or a related field. * Proven experience as an individual contributor. Work Environment This role is based onsite, offering a long-term opportunity with benefits such as Paid Time Off (PTO) and holidays observed on a set schedule. The work environment encourages learning and development with support from a lead engineer. Job Type & Location This is a Contract position based out of Westford, MA. Pay and Benefits The pay range for this position is $35.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Westford,MA. Application Deadline This position is anticipated to close on Jan 16, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Experience level: All Experience Level Experience required: 3 Years Education level: High school or equivalent Job function: Manufacturing Industry: Aviation & Aerospace Compensation: View salary Total position: 1 Relocation assistance: No Visa sponsorship eligibility: No We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay range is $30-$35/hr DOE. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Job Description Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay range is $30-$35/hr DOE. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Job DescriptionResponsibilitiesAssemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay range is $30-$35/hr DOE.BenefitsCompetitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Industrial Communications is an established and diverse wireless communications company providing powerful communications solutions to businesses, public safety, and government agencies throughout New England and South Florida. We have an immediate opening at our Marshfield, MA headquarters for an experienced Manager/Public Safety RF Systems. The essential duties and responsibilities for the Manager/Public Safety RF Systems are as follows: Design, implementation, and troubleshooting of two-way radio systems including infrastructure, subscribers, mobile backhaul Assist with customer presentations and proposals System staging System acceptance testing Radio coverage testing and interference mitigation Complete system documentation System upgrades Management of P25 sales personnel Management of RF systems technicians and network IT personnel Management of administrative support personnel Oversight of public safety network (fiber and microwave) JOB SPECIFICATIONS for the Manager/Public Safety RF Systems(Knowledge, Skill Sets, Experience, etc.) Bachelor's Degree in Engineering or Computer Science preferred 4+ years of experience RF systems engineering Experience/knowledge in radio communication systems, radio propagation, RF, wireless or broadband/LTE is preferred Strong technical acumen and willingness to interface with the customers Experience working with public safety customers Proven end-to-end technical experience in wireless communications (i.e., from mobile device through to core infrastructure) Strong general knowledge of wireless communications fundamentals and voice/data architectures Strong general knowledge of IP networking protocols and security Familiarity with Motorola Solutions' portfolio including ASTRO 25, Avtec, MOTOTRBO, WAVE/Team Communications, etc. a plus Familiarity with public safety radio systems design and operation Excellent verbal and written communications skills and the ability to present complex topics to non-technical audiences Ability to build strong relationships with internal and external stakeholders Self-motivated, excellent problem-solving skills, and a strong attention to detail CERTIFICATIONS CETa certification, FCC license, General Radio Operators License (GROL), APCO Public Safety Radio Technician is a plus. Electronics/Applied Electronics background desired.

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depending on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. Wire, test, and troubleshoot control panels and individual electrical subcomponents. Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. Read and mark-up electrical schematics. Assist with maintaining all equipment programs database. Follow company and industry workmanship standards for assembly and electrical work. Follow Lock-Out Tag-Out (LOTO) procedures as-needed. Set up and troubleshoot simple ethernet communications networks. performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. Recommend component replacement or upgrades when items become obsolete or are at end of life. Assist in maintaining building SCADA systems to ensure all are functioning as designed. Continuously improve the reliability of current systems Ability to effectively communicate with co-workers and take direction from others. Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. Other job duties as assigned EDUCATION AND/OR EXPERIENCE: 2 - 4 years of relevant experience Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking Familiarity with cGMP/GMP. Strong understanding of automated manufacturing equipment and programming required. Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) Proven experience with troubleshooting equipment problems and performing complex system tests required. Rockwell certification preferred. Proficient in MS Word, Excel, PowerPoint required. Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. Valid Massachusetts Driver's License required. Know the proper use of hand and power tools. Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: Must have good vision and manual dexterity. Able to sit / stand for prolonged periods at a desk and working on a computer. Must be able to work in a cold environment and in tight areas. Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. Loud Noise Perform tasks in both cold and hot work environments. Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! Enjoy top-tier Medical, Dental, Vision coverage. Pamper your furry friends with Pet Insurance. Stay fit with our Wellness Plan and Free Gym Access. Boost your skills with Employee Tuition Reimbursement. Unlock endless opportunities with College Scholarship for dependents. Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. Receive a Generous 401k Company Match. Take advantage of Competitive Paid Time Off. Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. Receive Relocation Assistance for a Smooth Transition. Earn Rewards through our Employee Bonus Referral Program. Elevate Your Workplace Experience with Community Impact Opportunities. Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Job Description We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards The hours are Mon-Fri 7AM-3PM. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement &

What we do matters! CPI Electron Device Business, with a history spanning more than seven decades, is a global leader in design, development, and manufacturing of electronic components and subsystems. We have locations in the United States and Europe. With a heritage of technological excellence, our team serves customers in the radar, defense, industrial, and scientific markets. CPI EDB produces thousands of products that have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. We are looking for energetic, agile, highly motivated, and customer focused individuals to join our team and help us to continue to be a market leader, shaping the future in communications and power. YOUR DAY TO DAY: To perform a variety of technical assignments such as constructing, repairing, troubleshooting, maintaining and calibrating electronic and mechanical equipment following established procedures and working under general supervision. YOU WILL BE ACCOUNTABLE FOR: * Constructing, repairing, troubleshooting, maintaining and calibrating electronic and mechanical equipment. * Perform other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Requires degree in appropriate technology or equivalent technical training, or combination of training and related experience of 3-5 years. * Knowledge of basic electronic fundamentals and ability to use common tools and instruments including multimeter and oscilloscope. * Proficient in soldering. * This position requires potential access to technology controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). The successful candidate must be a "U.S. Person" as defined under ITAR and EAR. In order to be a U.S. Person for ITAR and EAR purposes, you must (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) a protected individual as defined by 8 U.S.C. 1324b(a)(3). Salary Range: $24.00-$30.00 / hour EMPLOYEE BENEFITS: We recognize and appreciate that our employees are our most important asset. We invest in employee wellbeing by offering a wide range of comprehensive benefits to help you achieve your best physical and emotional health for yourself and your family. Employee Health & Wellness Benefits * Medical, vision and dental insurance * Disability insurances * Life insurance and AD&D * Employee assistance programs * Workplace accommodations Financial Benefits * Competitive compensation * Annual performance and salary reviews * Generous retirement savings plans with company match * Paid time off * Paid holidays * Flexible work schedules * Educational reimbursement * Tax savings accounts * Employee referral bonuses * And more! * Please note that while our philosophy is the same in all locations, benefits may vary by office/country WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI EDB, and we respect each employee as an integral member of our growing team. CPI EDB is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI EDB is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Join the Flexcon Team! $2,500 Sign on Bonus Friday, Saturday, Sunday 6:00AM - 6:00PM Flexcon Company, Inc. is a purpose-driven innovative company. A global, family-owned manufacturer of coated and laminated films and adhesives, products are used as functional components in manufactured goods and in graphics applications. Since 1956, Flexcon has supplied products for a wide range of industries including packaging, medical devices, automotive, durable labeling and more. We are currently hiring an Electromechanical Technician I for our Spencer, MA plant. We invite you to bring your drive for excellence, collaboration, integrity and respect. These core values allow us to support our culture of problem solving and continuous improvement. Flexcon is passionate about giving employees opportunities for career development and growth which includes dedicating time and resources to training, access to career latices, career development plans and more! What will you do in this role? Provide maintenance and mechanical support to production teams by troubleshooting equipment, understanding the instrumentation and perform repairs as needed and assemble, install, dismantle, and repair machinery, pumps, motors, hydraulic and pneumatic control systems. Troubleshoot, diagnose, and repair electrical systems, plan, and perform all required operations in preparation for installation, maintenance, and repair of electrical and electronic equipment within the facility and make proper connections to panels, electronic units, etc. Perform general repairs to all types of machines or equipment, tear down units, determine extent of troubles, repair or replace defective parts and reassemble. Replace parts such as bearing, gears, shafts, worn or broken units or equipment elements and install wire motors and drives for a variety of standard and special purpose machines and equipment. Must demonstrate the use of a multi-meter and have AC/DC drive experience. Move machines and equipment to the designated area using forklifts, hoists, and other equipment. Install all types of conduit, making bends, threading, and reaming where necessary. Perform ordinary machining operations using lathe, milling machine, grinder, drill press, etc. Perform general maintenance work in all buildings on Flexcon's campus Ensure all work is performed in compliance with local, state and federal regulatory requirements with industry best practices. Experience and commitment to fulfilling the preventative maintenance program including inspecting, cleaning, lubrication and adjustments to equipment and machines. Skilled in reading and working from blueprints, drawings, and schematics to complete tasks. What does it take to be successful in this role? H.S. Diploma or GED Knowledge of Allen Bradley equipment and software preferred. Use a laptop to connect to PLC's and drives to troubleshoot and make repairs. Excellent communication skills, both written and verbal Willing to get your hands dirty Some travel may be required What's in it for you? $2,500 sign on bonus Competitive Compensation & Annual Bonus Program Medical, Dental, Vision, and Life Insurance Tuition Reimbursement Program 401K Match Casual Work Environment Career Development Opportunities And more! By applying to this job and providing your mobile number, you agree to receive an initial text from Flexcon, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies. At Flexcon, we offer a comprehensive compensation and benefits package that includes base salary, healthcare coverage (medical, dental, and vision), life and disability insurance, 401(k) with company match, paid time off, wellness programs, and tuition assistance. Based on region, the expected salary range for this position is $24.01-$40.02 an hour. The posted salary range reflects a national pay scale and is intended to provide a general idea of compensation across different geographic regions. Actual compensation may vary depending on location, experience, and other job-related factors. We take regional market differences into consideration to ensure fair and competitive pay in each area. Equal Opportunity Employer, Protected Veterans, Individuals with Disabilities

Benefits: 401(k) Health insurance Paid time off Training & development Vision insurance Bonus based on performance PRISM SPECIALTIES (Prism) is a disaster restoration company specializing in the restoration of both consumer and commercial electronics and appliances. We are currently seeking an entry level, reliable, and detail-oriented General Technician to join our company. No experience required, candidate will be trained in all aspects of the job. As an Electronics Technician, you will play a crucial role in evaluating, restoring, and delivering consumer electronics and equipment affected by various damages (fire, water, etc.) to ensure they are returned to their pre-loss condition. We will provide on the job training, no prior experience needed. Starting Pay: $17/hr - $19.50/hr If you're looking for an opportunity where your efforts lead directly towards helping others while developing your skills within the world of electronics restoration - we encourage you to apply! Key Responsibilities: Conduct on-site evaluations of damaged electronics from insurance claims related to fire or water damage. Safely inventory, remove, transport electronic items and appliances from insured properties. Disassemble electronic items for thorough evaluation; clean and restore them as needed. Document assessment results including model numbers and serial numbers using digital tools. Deliver restored electronic items back to insured homes or businesses; reinstall appliances with care (“white glove” service). What We Are Looking For: Attention to detail with strong organizational skills; ability to follow work instructions accurately. Excellent customer service skills conducive to providing high-quality support for our clients during sensitive times. Comfortable working in post-peril environments while lifting/carrying up to 50 pounds during pick-up/delivery activities. Valid driver's license with a satisfactory driving record required for operating company vehicles (box trucks). Mechanical inclination preferred along with problem-solving skills related to both troubleshooting electronics and equipment repairs. Job Type: Full-time Compensation: $17.00 - $19.50 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Restoration Specialties Corporate.

Job DescriptionBenefits: 401(k) Health insurance Paid time off Training & development Vision insurance Bonus based on performance PRISM SPECIALTIES (Prism) is a disaster restoration company specializing in the restoration of both consumer and commercial electronics and appliances. We are currently seeking an entry level, reliable, and detail-oriented General Technician to join our company. No experience required, candidate will be trained in all aspects of the job. Position Summary: As an Electronics Technician, you will play a crucial role in evaluating, restoring, and delivering consumer electronics and equipment affected by various damages (fire, water, etc.) to ensure they are returned to their pre-loss condition. We will provide on the job training, no prior experience needed. Starting Pay: $17/hr - $19.50/hr If youre looking for an opportunity where your efforts lead directly towards helping others while developing your skills within the world of electronics restoration we encourage you to apply! Key Responsibilities: Conduct on-site evaluations of damaged electronics from insurance claims related to fire or water damage. Safely inventory, remove, transport electronic items and appliances from insured properties. Disassemble electronic items for thorough evaluation; clean and restore them as needed. Document assessment results including model numbers and serial numbers using digital tools. Deliver restored electronic items back to insured homes or businesses; reinstall appliances with care (white glove service). What We Are Looking For: Attention to detail with strong organizational skills; ability to follow work instructions accurately. Excellent customer service skills conducive to providing high-quality support for our clients during sensitive times. Comfortable working in post-peril environments while lifting/carrying up to 50 pounds during pick-up/delivery activities. Valid drivers license with a satisfactory driving record required for operating company vehicles (box trucks). Mechanical inclination preferred along with problem-solving skills related to both troubleshooting electronics and equipment repairs. Job Type: Full-time

Job Description Wire and build electrical control panels, junction boxes and subassemblies per customer requirement. Read and interpret schematics, diagrams, blueprints, specifications, work orders, bills of material. Drill or tap holes to mount control units or to provide openings for components, wiring, or instruments. Utilize a variety of small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, and pliers. Complete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Red-line documentation as necessary to initiate ECOs through Engineering. Perform operations such as deburring, grinding & sawing. Operate hand pallet jacks to move material within plant. Install finished assemblies or subassemblies in cases and cabinets. Willingness to work overtime as needed. EDUCATION AND EXPERIENCE Minimum of a High School Education. Technical Certificate in Electrical Controls is desired 2+ years' experience in control panel building, wiring, reading schematics and electrical diagrams. An understanding of electrical currents. Highly motivated, detail oriented and able to work independently as well as in a team environment. Mechanical installation and electrical wiring for control panels and desks. Experience using hand tools to drill, tap, and assemble electrical panel is a must. PHYSICAL DEMANDS Work involves frequent lifting of materials and product up to 30 pounds. Frequent use of hand tools. Long periods of standing. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to, eye safety glasses, hearing protectors, safety shoes, and hardhats. Loose fitting clothes and jewelry are not permitted. SAFETY RESPONSIBILITIES Safety shoes are always required throughout the manufacturing plant. Certifications as necessary based on function; lock out/tag out, fork truck certification. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment. Pay Range (Massachusetts): $21.29 - 26.51 per hour. This range reflects the expected base pay for this position in Massachusetts and is based on internal equity and the established job family compensation structure. Actual compensation may vary based on experience, qualifications, and performance.