Electronics technician jobs in Swampscott, MA - 728 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X). Analog Devices Inc., Chelmsford Massachusetts facility is looking for Manufacturing Microwave & RF Test Technician (all shifts) to support our continued growth in the manufacture of high-performance microwave modules and sub-systems. Customers trust Analog Devices to deliver integrated electronics, and ADI is interested in energetic and organized team players that want to deliver quality products in a high-tech manufacturing environment. Microwave & RF Test Technician supports manufacturing in the testing and troubleshooting of medium to highly complex microwave modules. Requirements: US Citizenship and able/willing to obtain a government security clearance. Ability to follow both verbal and written instructions/documentation. 3-5 years minimum experience working in the microwave electronics industry, an associate degree, or a Military background with 3+ years' training and electronics experience. High school diploma/GED required. A diploma from a Vocational High School or Technical Diploma is a plus. All shifts available: 1st 7:00AM - 3:30PM EST 2nd: 3:00 PM - 11:30 PM EST 3rd: 11:00 PM - 7:30 AM EST Specific Responsibilities: Familiarity with using Network and Spectrum Analyzers, Power Meters, Oscilloscopes, RF Sources and other equipment used A strong ability to work with computer-controlled test systems as an individual contributor, as well as part of a team, to perform microwave electronics testing and troubleshoot complex microwave and millimeter-wave modules and subsystems. General knowledge of electronics construction A strong aptitude and interest in working with automated and manual test equipment Excellent communication and interpersonal skills required to work with engineering, management and other technicians. Test station setup and calibration Maintenance of test data Assembly of breadboards, test fixtures and wiring harnesses. Simple hand soldering knowledge Working knowledge of Microsoft Office For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: ExperiencedRequired Travel: Yes, 10% of the time Shift Type: 1st Shift/DaysThe expected wage range for a new hire into this position is $31 to $39. Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electronics Technician KiddeFenwal, LLC KiddeFenwal is the global market leader in designing and manufacturing innovative industrial and commercial fire suppression systems and safety controls. Our proprietary, fully certified offerings save lives, protect property, and minimize business interruption. Our brands-Kidde Fire Systems and Kidde Fire Protection-deliver highly engineered fire suppression, detection, and control systems across industrial, commercial, and marine sectors. Fenwal Controls supports OEMs with gas ignition, temperature control, and overheat detection products. Headquartered in Ashland, Massachusetts, KiddeFenwal operates globally, with facilities in the U.S., United Kingdom (KFI-UK), and India (KTI-India). Learn more at ******************* Our Purpose We protect lives, livelihoods, and iconic assets through innovative solutions, strong partnerships, and exceptional customer experiences. Built on a foundation of integrity and safety, we drive results with speed and excellence while fostering innovation and teamwork. Position Summary The key responsibilities include Work under limited supervision to provide technical support and task ownership to electrical engineers on a variety of engineering tasks. Execution of functional and environmental testing of electronic boards/control panel and associated equipment. Perform fault isolation testing on systems and equipment and assist engineers in determining methods or actions to remedy malfunctions. Perform soldering, wiring, fixture setup as required. Work with regulatory engineers for lab qualification program for regulatory agency testing Documentation of results and tracking of units under test (UUTs) using internally developed practices and procedures. Maintain inventory of piece parts that support the delivery of rapid prototypes. Collaborate with colleagues to maintain and manage inventory of key electronic equipment and assemblies. Participate in team meetings, providing accurate status, raising issues and risks. Actively participate in, and maintain strict compliance to, all company Policies and Procedures. All other duties as assigned This position reports to the Sr. Engineering Manager and involves collaboration with engineering teams. Experience and Competencies Experience with execution of functional and environmental testing of electronic devices. Hands-on experience with component-level troubleshooting of analog and digital circuits. Proficient in use and operation of electronic lab tools/equipment such as oscilloscopes, power meters, frequency counters, multimeters, temperature/environmental chambers, and spectrum analyzers. Experience documenting test procedures and communicating results to internal customers and regulatory agencies for product certification Able to read and interpret engineering drawings, electrical schematics, test data, test procedures and specifications Able to maintain and update equipment calibration records, test setup details, test records for agency review Able to quickly adjust to shifting priorities, perform and deliver in a fast-paced environment Self-motivated team-oriented individual who has the ability to work efficiently and safely in a laboratory environment with clear direction and minimal supervision Basic Qualifications Min. AA/AS degree (or other 2-year post high school training) Min. 3 years of relevant experience Preferred Qualifications/Competencies Experience documenting test procedures and communicating results to internal customers. Experience in understanding/developing programming / test fixtures Solid written and verbal communication skills Proficient in use of Microsoft Word, Outlook, and Excel software. Experience with test facility and equipment maintenance and management. Experience with use of Data Acquisition Equipment, i.e. National Instruments Lab View. Familiarity with C programming language and PIC family of microprocessors. Experience working with non-US based teams and suppliers. Sensitivity to cultural biases and understanding the communication practices needed to create successful partnerships in and open and supportive environment. KiddeFenwal, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other federally protected class.

This individual resides in production and has oversight responsibility for the integrity and execution of product test, troubleshooting and repair in a defined section of David Clark manufacturing. This job requires hands-on involvement with all aspects of the production process; including active participation in methods of manufacture with the goal of improving productivity while maintaining world-class quality standards. This individual will also be involved in the repair process relative to Customer Returned active ANR, wireless ground support and Digital Intercom product lines. PRIMARY DUTIES AND RESPONSIBILITIES : Coordinate and maintain oversight of product flow through test and products returned for repair. This includes, but is not limited to, Disassembly of customer returned products, Diagnosis of failure, Repair and reassembly of the repaired product Test and QA audit of the repair prior to return to the customer. Troubleshoot down the component level, sub-assemblies or final product that have been returned seeking the most efficient and cost effective means to identify and repair faults. Initiate timely corrective action based on troubleshooting findings. Interface with Engineering to improve test philosophies, fixtures and procedures. Interface with Q.A., Purchasing, Production Control and Engineering as appropriate when seeking remedy and resultant corrective action. Perform product testing when appropriate. Participate in the design review and conceptual development of new testers for new and existing products. Critique new or revised test procedures and train test personnel on new procedures. Participate in the development and implementation of processes and method changes that improve productivity and product quality. MINIMUM QUALIFICATIONS : Excellent written and verbal communication skills and CPU literate (MSWord, Excel, Outlook) Ability to work with minimal supervision, professionally confident and self-motivated. Good electro-mechanical skills to disassemble and assemble electronic products. Proficient working from engineering documentation (schematics, wiring diagrams, PCB assembly drawings, Bills of Material etc.) Proven experience and/or interest and ability to learn and develop skills with: Troubleshooting down to the component level analog and digital PCBA's, acoustic transducers and cable assemblies to identify source of the fault. Utilizing standard and acoustic source and measurement techniques and equipment. SMD and leaded PCB assemblies; ability to remove and replace SMD and leaded components when necessary. ASEE, ASET or equivalent. Experience in a manufacturing organization as Production Test Technician or experience as an Engineering Technician a plus.

We have an exciting opportunity to join us in supporting one of our valued customers as an Electronic Warfare SME supporting United States Special Operations Command (USSOCOM) and Special Operations Forces (SOF). Various Locations: Fort Belvoir, VA; Fort Bragg, NC; Lexington, KY; Fort Eustis, VA; Natick, MA * This position is contingent upon a contract award* Essential Duties: * Assist the SGM and Deputy for TT as the EW SME working in collaboration with government partners, academic laboratories, and private industry - to develop new tools and technology in support of the SOF Electronic Warfare community. * Assist in the preparation and development of new requirements documentation to include Initial Capabilities Documents (ICD), Capabilities Development Documents (CDD), SPECAT messages, Basis of Issue Plans (BOIP), Test Plans, and update Project Folders. * Tasks include the identification and development of Radio Detection and Ranging (RADAR) and Electronic Counter Measures (ECM), Intelligence, Surveillance, and Reconnaissance (ISR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) for further development or fielding in support of SOF. Required Qualifications: * Qualifications include a background in EW, RADAR, ECM, ISR, EW, and SIGINT operations (particularly SOF) with a knowledge of EW techniques, tactics, & procedures. * 12+ years of relevant experience * Excellent communication, technical writing, and presentation skills. * Familiarity with DoD acquisition lifecycle and rapid prototyping processes. * Prior experience supporting USSOCOM, SOF AT&L, or other SOF components. (preferred). Education: Bachelor's or Master's degree in a related field Required Clearance: TS/SCI Travel: TBD Why Join USfalcon? * Mission-Focused Culture - Join a company deeply embedded in supporting defense, aerospace, and federal initiatives. * Career Growth & Development - Access training, mentorship, and advancement opportunities within a growing mid-tier defense contractor. * Trusted Industry Partner - Be part of a company with nearly 30 years of continuous service to DoD and federal clients.

Experience level: All Experience Level Experience required: 3 Years Education level: High school or equivalent Job function: Manufacturing Industry: Aviation & Aerospace Compensation: View salary Total position: 1 Relocation assistance: No Visa sponsorship eligibility: No We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay range is $30-$35/hr DOE. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Job DescriptionResponsibilitiesAssemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay range is $30-$35/hr DOE.BenefitsCompetitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Job Description Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay range is $30-$35/hr DOE. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

Industrial Communications is an established and diverse wireless communications company providing powerful communications solutions to businesses, public safety, and government agencies throughout New England and South Florida. We have an immediate opening at our Marshfield, MA headquarters for an experienced Manager/Public Safety RF Systems. The essential duties and responsibilities for the Manager/Public Safety RF Systems are as follows: Design, implementation, and troubleshooting of two-way radio systems including infrastructure, subscribers, mobile backhaul Assist with customer presentations and proposals System staging System acceptance testing Radio coverage testing and interference mitigation Complete system documentation System upgrades Management of P25 sales personnel Management of RF systems technicians and network IT personnel Management of administrative support personnel Oversight of public safety network (fiber and microwave) JOB SPECIFICATIONS for the Manager/Public Safety RF Systems(Knowledge, Skill Sets, Experience, etc.) Bachelor's Degree in Engineering or Computer Science preferred 4+ years of experience RF systems engineering Experience/knowledge in radio communication systems, radio propagation, RF, wireless or broadband/LTE is preferred Strong technical acumen and willingness to interface with the customers Experience working with public safety customers Proven end-to-end technical experience in wireless communications (i.e., from mobile device through to core infrastructure) Strong general knowledge of wireless communications fundamentals and voice/data architectures Strong general knowledge of IP networking protocols and security Familiarity with Motorola Solutions' portfolio including ASTRO 25, Avtec, MOTOTRBO, WAVE/Team Communications, etc. a plus Familiarity with public safety radio systems design and operation Excellent verbal and written communications skills and the ability to present complex topics to non-technical audiences Ability to build strong relationships with internal and external stakeholders Self-motivated, excellent problem-solving skills, and a strong attention to detail CERTIFICATIONS CETa certification, FCC license, General Radio Operators License (GROL), APCO Public Safety Radio Technician is a plus. Electronics/Applied Electronics background desired.

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depnding on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. Wire, test, and troubleshoot control panels and individual electrical subcomponents. Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. Read and mark-up electrical schematics. Assist with maintaining all equipment programs database. Follow company and industry workmanship standards for assembly and electrical work. Follow Lock-Out Tag-Out (LOTO) procedures as-needed. Set up and troubleshoot simple ethernet communications networks. performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. Recommend component replacement or upgrades when items become obsolete or are at end of life. Assist in maintaining building SCADA systems to ensure all are functioning as designed. Continuously improve the reliability of current systems Ability to effectively communicate with co-workers and take direction from others. Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. Other job duties as assigned EDUCATION AND/OR EXPERIENCE: 2 - 4 years of relevant experience Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking Familiarity with cGMP/GMP. Strong understanding of automated manufacturing equipment and programming required. Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) Proven experience with troubleshooting equipment problems and performing complex system tests required. Rockwell certification preferred. Proficient in MS Word, Excel, PowerPoint required. Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. Valid Massachusetts Driver's License required. Know the proper use of hand and power tools. Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: Must have good vision and manual dexterity. Able to sit / stand for prolonged periods at a desk and working on a computer. Must be able to work in a cold environment and in tight areas. Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. Loud Noise Perform tasks in both cold and hot work environments. Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! Enjoy top-tier Medical, Dental, Vision coverage. Pamper your furry friends with Pet Insurance. Stay fit with our Wellness Plan and Free Gym Access. Boost your skills with Employee Tuition Reimbursement. Unlock endless opportunities with College Scholarship for dependents. Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. Receive a Generous 401k Company Match. Take advantage of Competitive Paid Time Off. Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. Receive Relocation Assistance for a Smooth Transition. Earn Rewards through our Employee Bonus Referral Program. Elevate Your Workplace Experience with Community Impact Opportunities. Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Trystar is a leader in portable and permanent power distribution solutions, lighting inverters, power quality, rectifiers, and e-houses. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Whether based in our state-of-the- art headquarters in Faribault, MN, our corporate office in Burnsville, MN, one of our manufacturing locations in Troy, MI, Houston, TX or Merrimack, NH, or a member of our team out in the field, safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar's team members are our most important asset. We are in search of a Production Electronics Technician . The Production Electronics Technician supports Manufacturing, Quality, and Engineering by testing, troubleshooting, and repairing circuit boards and systems. Performs tests necessary to debug, evaluate, and characterize analog, digital, embedded systems, and power circuitry. Analyzes and interprets test data to identify component and assembly-related problems. Modifies and repairs electrical prototypes, parts, assemblies, and systems to correct functional deviations. This role will report to the Quality Manager and be based in Merrimack, NH. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: Provide technical support for Manufacturing across all product lines. Perform manufacturing test of products and subassemblies. Apply knowledge of electronic theory, schematics, specifications, and test techniques to isolate both product and PCB failures to lowest replaceable unit or component. Perform rework and repair of SMT and through-hole PCBs to production quality standards. Perform failure analysis of field failures and returned product. Assist Quality in investigating process flaws and component problems. Build and maintain test fixtures including cables, breakout boards, and test loads. Assist Engineering in circuit debug, evaluation, and characterization, and analyze and interpret test information to assist in resolution of design-related problems. Practice 5S manufacturing methodologies. Job Requirements: BASIC QUALIFICATIONS High School Diploma or equivalent (GED)1-2 years of specialized electronics education OR 2+ years' experience in both testing and troubleshooting electronic assembles to the component level. Trained/certified in IPC-A-610 and IPC-771/7721 soldering and rework quality standards. ADDITIONAL QUALIFICATIONS Proficiency with common laboratory equipment including oscilloscopes, DMMs, and signal generators. Solid understanding of analog, digital, embedded systems, and power circuitry, and ability to troubleshoot PCBs and systems to the component level. Ability to solder and inspect SMT assemblies to IPC standards. Good verbal and written communication skills Ability to read, interpret, and understand schematics, BOMs, and other engineering documents. Competency with office productivity software such as Excel and Word Benefits: 401 (k) with company match Medical Insurance Dental Insurance Vision Insurance Disability Insurance PTO Sick Time Employee Appreciation Time Paid Holidays Trystar is an Equal Opportunity Employer and is committed to creating a diverse and inclusive environment. We consider all applicants for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, marital status, veteran status, or any other characteristic protected by law. We are committed to providing equal opportunities for all individuals and to fostering a workplace that values diversity, equity, and inclusion.

What we do matters ! CPI Electron Device Business, with a history spanning more than seven decades, is a global leader in design, development, and manufacturing of electronic components and subsystems. We have locations in the United States and Europe. With a heritage of technological excellence, our team serves customers in the radar, defense, industrial, and scientific markets. CPI EDB produces thousands of products that have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. We are looking for energetic, agile, highly motivated, and customer focused individuals to join our team and help us to continue to be a market leader, shaping the future in communications and power. YOUR DAY TO DAY: To perform a variety of technical assignments such as constructing, repairing, troubleshooting, maintaining and calibrating electronic and mechanical equipment following established procedures and working under general supervision. YOU WILL BE ACCOUNTABLE FOR: Constructing, repairing, troubleshooting, maintaining and calibrating electronic and mechanical equipment. Perform other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Requires degree in appropriate technology or equivalent technical training, or combination of training and related experience of 3-5 years. Knowledge of basic electronic fundamentals and ability to use common tools and instruments. Proficient in soldering. This position requires potential access to technology controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). The successful candidate must be a “U.S. Person” as defined under ITAR and EAR. In order to be a U.S. Person for ITAR and EAR purposes, you must (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) a protected individual as defined by 8 U.S.C. 1324b(a)(3). Salary Range: $24.00-$30.00 / hour EMPLOYEE BENEFITS: We recognize and appreciate that our employees are our most important asset. We invest in employee wellbeing by offering a wide range of comprehensive benefits to help you achieve your best physical and emotional health for yourself and your family. Employee Health & Wellness Benefits Medical, vision and dental insurance Disability insurances Life insurance and AD&D Employee assistance programs Workplace accommodations Financial Benefits Competitive compensation Annual performance and salary reviews Generous retirement savings plans with company match Paid time off Paid holidays Flexible work schedules Educational reimbursement Tax savings accounts Employee referral bonuses And more! * Please note that while our philosophy is the same in all locations, benefits may vary by office/country WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI EDB, and we respect each employee as an integral member of our growing team. CPI EDB is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI EDB is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

What we do matters! CPI Electron Device Business, with a history spanning more than seven decades, is a global leader in design, development, and manufacturing of electronic components and subsystems. We have locations in the United States and Europe. With a heritage of technological excellence, our team serves customers in the radar, defense, industrial, and scientific markets. CPI EDB produces thousands of products that have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. We are looking for energetic, agile, highly motivated, and customer focused individuals to join our team and help us to continue to be a market leader, shaping the future in communications and power. YOUR DAY TO DAY: To perform a variety of technical assignments such as constructing, repairing, troubleshooting, maintaining and calibrating electronic and mechanical equipment following established procedures and working under general supervision. YOU WILL BE ACCOUNTABLE FOR: * Constructing, repairing, troubleshooting, maintaining and calibrating electronic and mechanical equipment. * Perform other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Requires degree in appropriate technology or equivalent technical training, or combination of training and related experience of 3-5 years. * Knowledge of basic electronic fundamentals and ability to use common tools and instruments including multimeter and oscilloscope. * Proficient in soldering. * This position requires potential access to technology controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). The successful candidate must be a "U.S. Person" as defined under ITAR and EAR. In order to be a U.S. Person for ITAR and EAR purposes, you must (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) a protected individual as defined by 8 U.S.C. 1324b(a)(3). Salary Range: $24.00-$30.00 / hour EMPLOYEE BENEFITS: We recognize and appreciate that our employees are our most important asset. We invest in employee wellbeing by offering a wide range of comprehensive benefits to help you achieve your best physical and emotional health for yourself and your family. Employee Health & Wellness Benefits * Medical, vision and dental insurance * Disability insurances * Life insurance and AD&D * Employee assistance programs * Workplace accommodations Financial Benefits * Competitive compensation * Annual performance and salary reviews * Generous retirement savings plans with company match * Paid time off * Paid holidays * Flexible work schedules * Educational reimbursement * Tax savings accounts * Employee referral bonuses * And more! * Please note that while our philosophy is the same in all locations, benefits may vary by office/country WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI EDB, and we respect each employee as an integral member of our growing team. CPI EDB is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI EDB is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Job Description We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards The hours are Mon-Fri 7AM-3PM. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement &

Job Description Wire and build electrical control panels, junction boxes and subassemblies per customer requirement. Read and interpret schematics, diagrams, blueprints, specifications, work orders, bills of material. Drill or tap holes to mount control units or to provide openings for components, wiring, or instruments. Utilize a variety of small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, and pliers. Complete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Red-line documentation as necessary to initiate ECOs through Engineering. Perform operations such as deburring, grinding & sawing. Operate hand pallet jacks to move material within plant. Install finished assemblies or subassemblies in cases and cabinets. Willingness to work overtime as needed. EDUCATION AND EXPERIENCE Minimum of a High School Education. Technical Certificate in Electrical Controls is desired 2+ years' experience in control panel building, wiring, reading schematics and electrical diagrams. An understanding of electrical currents. Highly motivated, detail oriented and able to work independently as well as in a team environment. Mechanical installation and electrical wiring for control panels and desks. Experience using hand tools to drill, tap, and assemble electrical panel is a must. PHYSICAL DEMANDS Work involves frequent lifting of materials and product up to 30 pounds. Frequent use of hand tools. Long periods of standing. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to, eye safety glasses, hearing protectors, safety shoes, and hardhats. Loose fitting clothes and jewelry are not permitted. SAFETY RESPONSIBILITIES Safety shoes are always required throughout the manufacturing plant. Certifications as necessary based on function; lock out/tag out, fork truck certification. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment. Pay Range (Massachusetts): $21.29 - 26.51 per hour. This range reflects the expected base pay for this position in Massachusetts and is based on internal equity and the established job family compensation structure. Actual compensation may vary based on experience, qualifications, and performance.

Job Description Our Direct Client has a new Electronic Technician job. As an Electronic Technician you will be responsible for overseeing the functionality of the electronic instrumentation throughout our Clients Manufacturing facility. All tasks must be performed safely, in accordance with experience, training, instructions and guidance from Quality Management or designee. This position performs duties with minimal supervision. Responsibilities and Duties: Repairs, installs, and inspects electronic systems and devices as directed through verbal or written directions, diagrams, drawings, or specifications. Calibrates electronic instrumentation and sensing equipment used to monitor cable manufacturing processes. Installs and repairs the camera, paging, and speaker systems throughout the facility. Ability to work with other trades, manufacturing personnel, engineers, and supervisory personnel to develop and implement changes to electronic components and modify operation of process control equipment. Properly completes maintenance records and calibration records on paper and in a variety of computer systems. Ability to read and understand maintenance manuals, work instructions, schematics, and blueprints. Determines material or replacement needs and a logical method for repair; takes appropriate action to meet those needs and makes repairs. Safely operates various hand and power tools and powered industrial equipment such as forklifts, aerial lifts, and pallet jacks. Works as a team player to facilitate the objectives of the Maintenance Department. Follows safety guidelines (PPE, etc.) and demonstrates safe work practices and plant safety rules, including Lockout/Tagout and NFPA 70e Responds to multiple assignments in a timely and efficient manner. Overtime may be required, based on business need; regular attendance required. Works with and as inspectors to verify correct production line setups. Regular audits of production lines and associated systems. Other duties as assigned. If you are interested in this Electronic Technician job please apply now to be connected with a member of our team members. Please note: Applying to this role is an agreement to have your information entered into our database and acknowledgement that a recruiter will reach out to you either by phone, email, and/or text message regarding this and similar job opportunities. Aquinas Consulting is a woman and minority owned company headquartered in Milford, CT that provides Engineering, Information Technology (IT), and Manufacturing staffing solutions throughout the US. We take pride in 20 years of service to our clients, our hiring managers, our consultants, and our local community. Aquinas is an affirmative action, equal opportunity employer and committed to considering all qualified applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law. *************************

Highly accurate wireless tracking in 3D space, enabling large-scale, immersive augmented and virtual reality experiences without the use of any markers. Job Description Builds PCB and system-level prototype units Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions Performs operational test and fault isolation on systems and equipment Assists in determining methods or actions to remedy malfunctions Assists in the design, construction, test and check-out of PCBs and cable assemblies Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators and specialized test apparatus Qualifications Associates degree in a technical field and three (3) years of experience testing, troubleshooting and repairing electro-mechanical systems Proficient in soldering through-hole and SMT PCB components Additional Information This person will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized equipment.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.